Exhibit 10.2
CONFIDENTIAL TREATMENT REQUESTED BY SCOPE
METALS TRADING & TECHNICAL
SERVICES LIMITED
SUPPLY AGREEMENT
FOR
MATERIAL
BETWEEN
ISRAEL AIRCRAFT INDUSTRIES LTD.
AND
SCOPE - METAL TRADING & TECHNICAL SERVICES LTD.
CONFIDENTIAL
THIS MATERIAL SUPPLY AGREEMENT (THE "AGREEMENT") made and entered into as of 7
day of July, 2004, by and between ISRAEL AIRCRAFT INDUSTRIES LTD., a corporation
duly organized and existing under the laws of the State of Israel, located at
Ben-Gurion International Airport, 00000 Xxxxxx, ("IAI") and SCOPE - METAL
TRADING & TECHNICAL SERVICES LTD., a corporation duly organized and existing
under the laws of the State of Israel, and having its principal place of
business at Park - Reem (Mivza), Xxx Xxxxx, 00000, Xxxxxx (herein, "SUPPLIER")
(IAI and Supplier are each sometimes hereinafter referred to individually as a
"Party" and collectively as the "Parties").
1. INTRODUCTION
WHEREAS, IAI is engaged in the development of defense and civil aerospace
technology and is a full service aircraft maintenance facility. In
the course of its business, IAI (taken as a whole) purchases
substantial types and quantities of materials (the "Material"). A
description of the Material that may, but need not necessarily, be
purchased by IAI pursuant to this Agreement is annexed hereto as
Exhibit 1, which may be amended from time to time by mutual
agreement of the Parties to include additional materials; and
WHEREAS, IAI desires to establish a "just-in-time program" (the "JIT
Program") for the delivery of the Materials. Under the JIT
Program, Material shall be managed and delivered on a
"just-in-time basis" ("JIT Basis") which shall mean, that: (i)
Supplier shall deliver all Material in accordance with the
Delivery Response Times set forth in Article 5.3 of this
Agreement; (ii) Supplier shall establish the Allocated Stock (as
defined in Article 4.7 below); (iii) Supplier shall, in response
to each Order, deliver all Material directly to the receiving dock
or production floor of the IAI Division ordering such Material;
(iv) Supplier shall provide all required technical support as set
forth in Article 8 below; (v) Supplier shall manage the
storage/handling of the IAI Stock, as per exhibit 4; (vi)
Supplier's facilities and systems have been certified by IAI's
quality assurance personnel; and (vii) Supplier shall perform all
required inspection procedures, including sending Material to IAI
for laboratory tests at Supplier's expense ("Lab Tests"), as
provided in the Quality Assurance Plan attached hereto as Exhibit
2 ("Quality Plan"); and
WHEREAS, Supplier is a stocking Supplier and distributor of Materials and
Supplier desires to provide IAI with a JIT Program in accordance
with the provisions of this Agreement.
THEREFORE, THE PARTIES AGREE AS FOLLOWS:
1
CONFIDENTIAL
2. IMPLEMENTATION
2.1 In order to ensure an orderly transition from IAI's current Material
procurement system to the JIT Program, Buyer and Supplier agree to
implement the JIT Program as follows:
(a) Promptly after the signing of this Agreement (the "Effective Date"),
but in no event later than forty (40) days thereafter, and as a
precondition to the Commencement Date, Supplier will provide IAI with:
(i) notification that it has performed the internal training of its
personnel required in order to abide by the terms of this Agreement,
(ii) notification that it has implemented an internal audit to
determine compliance with IAI's Quality Plan, and (iii) the results of
such internal audit. Within 15 days after receiving such notice from
Supplier, IAI Quality Assurance personnel will start the quality audit
of Supplier's facilities and systems in order to complete the quality
certification as soon as possible.
(b) Not later than sixty (60) days after the Effective Date, and as a
precondition to the Commencement Date, Supplier shall notify IAI, in
writing, that: (i) Supplier has established the infrastructure in
Israel required in order to meet the Delivery Response Time (e.g.,
distribution channels); (ii) Supplier is ready, able and willing to
deliver all Materials listed on Exhibit 1 within the Delivery Response
Time; (iii) IAI's quality assurance department has certified in
writing that Supplier has passed its quality audit, including the
audit/approval of Supplier's software, as per Article 13.9 below; (iv)
Supplier has signed and returned the Umbrella Industrial Cooperation
Agreement, attached hereto as Exhibit 7; and (v) Supplier is ready,
able and willing to comply with all of the requirements of this
Agreement, including, without limitation, quality assurance, pricing,
EDI/web EDI system, packing and documentation, and technical support.
IAI shall immediately take steps to verify Supplier's notice. IAI
shall employ its best efforts to make its verification within twenty
(20) days.
(c) Not later than ninety (90) days after the Effective Date, and as a
precondition to the Commencement Date, Supplier shall notify IAI, in
writing, that Supplier has established the Allocated Stock in
accordance with Article 4.7. Upon such written verification, and
provided that the preconditions delineated herein have been met, the
deliveries shall commence and IAI shall so notify its Divisions.
2.2 Starting on the Commencement Date of this Agreement, IAI will commence
purchasing Materials from Supplier on a JIT Basis. As such, IAI will
purchase from Supplier the quantity of the Materials as forecasted, and the
non-forecasted quantities of Materials, as both appear in exhibit 1 of this
Agreement. Such purchases shall be on the condition that Supplier can meet
the Delivery Response Time as described in Article 5.3. Other than those
Materials as described herein, IAI may, at its sole discretion, purchase
Materials contained in Exhibit 1 from other Suppliers.
2
CONFIDENTIAL
3. DEFINITIONS
In this Agreement and all annexes hereto, unless otherwise specifically
provided, the following words and expressions shall have the meanings given
to them below:
Aircraft on Ground ("AOG") Means a category of high urgency for Materials
and/or Work Stoppage and/ in which Materials and/ are required to
return an aircraft to service or to avoid an
imminent or existing work stoppage. Any Order
emanating from one of the Divisions (Aircraft,
Engines, or Components Division) of IAI's Bedek
Group shall be treated as AOG in all respects.
Allocated Stock As defined below in Article 4.7.
Approved Certificate Means a certificate issued by the quality
assurance staff of the Approved Source in
respect of a Material to which the document
relates certifying that such Material complies
with the relevant specifications, standards and
requirements of the Manufacturer's Authority,
to whose authority IAI is subject.
Approved Source Means any new or existing supply source
approved by IAI for use by Supplier in support
of this Agreement. This may consist of any
combination of Manufacturers, distributors or
other sources approved in writing by IAI.
Authority Means governmental, regulatory or oversight
body that regulates the manufacture, use,
transport, handling, storage, safety,
maintenance, sale, or disposal of Materials.
Certificate of Compliance "Manufacturer COC" means a certificate issued
("COC") by the quality assurance staff of the
Manufacturer confirming that the Material that
("Manufacturer COC" and "COC has been manufactured has been inspected, and
shipper") complies with all applicable specifications.
"COC Shipper" means a certificate issued by the
quality assurance staff of Supplier confirming
that such Materials comply with the Quality
Plan as approved by IAI, e.g., that the
Materials were visually inspected, manufacturer
COT was compared against the procurement Spec.,
the Materials were lab tested (if required),
purchased from Approved Source, the COC and COT
of Manufacturer are kept at Shipper's files,
and the "Shipper COC" is signed by an IAI
approved quality inspector.
Certificate of Test ("COT") Means a certificate issued by the quality
assurance staff of the Manufacturer of
Materials that includes the audit results for
mechanical, physical properties, chemical
composition, etc.
Commencement Date Means the commencement date of this Agreement,
which shall be no later than ninety (90) days
after the date of signature of this Agreement
by the Parties. Should this agreement not
commence during such ninety (90) day period,
e.g., due to a Party's failure to comply with a
precondition to commencement, then this
agreement shall
3
CONFIDENTIAL
be deemed to be null and void.
Delivery Response Time Means the elapsed time that is expected to
exist between the date and time IAI places an
Order for Material(s) and the date and time
such Material(s) are delivered to IAI, as set
forth in Article 5.3 and for Special Deliveries
as described in Article 6.
Disclosure Means the release of any Proprietary
Information.
Due Date Means the date that Material(s) is/are due to
be delivered by Supplier to IAI in accordance
with Article 5.3, except that with respect to
Materials that are not in Supplier's stock and
for which IAI agrees to a delivery date that is
later than that appearing in Article 5.3, then
the Due Date shall be such later date.
EDI/Web EDI Means an electronic message order and
administration system operating on an EDI or
internet platform.
FSL Means "Forward Stocking Location", in which
Supplier maintains stock of Materials.
IAI Means Israel Aircraft Industries, Ltd. and
includes any and all of its divisions and
subsidiaries.
IAI Division Means any one of IAI's divisions, subsidiaries,
plants or facilities, including, e.g., Israel
Aircraft Industries International, based in New
York.
IAI Stock Means the IAI inventory of Materials to be
stored at Supplier's FSL.
Kit Means a set/group of Materials in accordance
with a defined and quantified list that is to
be supplied as one lot.
Manufacturer Means the manufacturer of a Material, as
approved by IAI.
Order Means IAI's intention to buy Materials in the
form of a purchase order, delivered by mail,
fax, EDI or Internet. Materials delivered in
response to Orders shall be delivered with
accompanying invoices.
Route Card Are production notes, which are provided to
Supplier and describe the types and dimensions
of the Material to be delivered to IAI pursuant
to an IAI Order.
Proprietary Information Means all trade secrets and confidential
information which is proprietary to the
disclosing party including, but not limited to,
type design data, drawings, photographs,
specifications, models, prototypes, designs,
materials, construction or assembly, computer
hardware and software (whether in
machine-readable or human-readable form),
technical, commercial and operational
information concerning products, information
concerning manufacturing methods and
techniques, quality control and test methods,
marketing data including target customers,
customer lists and market plans, cost and
pricing data and product applications, and know
how.
Quality Documentation Means the COC (both types), COT, and all other
quality-related documentation required by the
Quality Plan.
Term Means the term of this Agreement, as set forth
in Article
4
CONFIDENTIAL
12.
Traceability Means the ability to trace the origin and
history of Materials back to their
manufacturing lot batch.
4. SALE OF MATERIALS
4.1. Supplier shall, during the Term, and subject to the terms of this
Agreement, sell to IAI such quantities of Materials as described on Exhibit
1 attached hereto (the "Materials"), as IAI may order or request from time
to time in accordance with the provisions of this Agreement.
4.2. IAI may purchase Material through the use of an Order containing estimated
or defined delivery date for supply of Material for future requirements.
IAI may cancel the unused portion of any such Order at any time, without
incurring any penalty or default.
4.3. Supplier shall provide Materials in such quantities and in sizes as may be
specified on the face of IAI Orders or Route Card associated with such
Order. Only the Materials as cut to size and delivered to IAI, shall be
charged to IAI. For the avoidance of doubt, any remaining material
resulting from such an IAI order shall remain the property of the Supplier,
and IAI shall not be charged for such remaining material.
4.4. Supplier shall purchase Materials from Approved Sources only. Supplier
agrees to provide IAI with the Materials in accordance with the performance
standards set forth in Article 21.1. To ensure that continuous improvements
are pursued, both Parties will meet to review performance and the total
effectiveness of the business between the Parties on a quarterly basis. The
Parties agree to conduct Program Reviews via video/telephone conference
calls, in the event of international travel restrictions.
4.5. Purchase orders shall be governed only by the general terms and conditions
of this Agreement in addition to the IAI's standard terms and conditions
contained on IAI's Purchase Orders, attached hereto as Exhibit 5. If there
is any conflict between the standard IAI terms and conditions on IAI's
purchase orders, or Supplier's acknowledgements and invoices and the terms
and conditions of this Agreement, the terms and conditions of this
Agreement shall govern.
4.6. Communications between the Parties, including Orders and required
acceptances, shall be made through EDI, the Internet or such other system
or method, as Buyer and Supplier shall mutually agree upon. Upon IAI's
request, Supplier shall establish and support an Internet or other
electronic/EDI based system, which will enable: (i) on line ordering
transactions; (ii) invoicing and (iii) provide information regarding:
Supplier's product information, outstanding Orders for Materials by Buyer
and prices thereof, Materials availability, delivery status, invoices
submitted and paid, Order management and status reports, and inventory
status of Allocated Stock. The system shall support user profile and
security. Specific technical requirements of such EDI system are contained
in Exhibit 6 attached hereto. Each side (Supplier and IAI) will bear its
cost for establishing the communication system and will coordinate the
interface required for this communication system. Notwithstanding the
foregoing any
5
CONFIDENTIAL
Supplier system interface shall be fully compatible with IAI's electronic
systems currently in place.
4.7. Allocated Stock/FSL
4.7.1. Supplier shall maintain a sufficient inventory of Materials such
that Supplier can provide IAI's forecasted as well as non
forecasted requirements for Materials ("Allocated Stock") during
the term of this Agreement in accordance with the Delivery Response
Times as per Article 5.3. To assure such performance, Supplier
shall establish and constantly maintain in Israel a forward
stocking location ("FSL") comprised, for the forecasted Materials,
of minimum three months consumption and for the non-forecasted
Materials, as Supplier deems necessary. Supplier shall apply
expedited restocking to any such Materials that fall under a thirty
(30) days inventory level, to return the inventory level to the
three (3) months minimum level or the level required pursuant to
the project schedules, as applicable.
4.7.2. Supplier shall house such Allocated Stock at an FSL to be located
in Israel. All Materials contained in the Allocated Stock shall
have undergone any and all Lab Testing required pursuant to the
Quality Plan, prior to inclusion in the FSL. Such FSL shall
occasionally be updated and restocked by Supplier in order to
reflect revisions to the list of Materials. IA1 buyers shall have,
through the EDI system, full access to information concerning the
inventory maintained by Supplier in the FSL.
4.7.3. The Supplier shall bear the full cost of establishing such FSL.
Supplier, within Supplier's capability as a distributor and not the
manufacturer of the Materials, shall assemble information to be
able to satisfy total IAI requirements for Materials, including
both planned and unplanned demand. It shall be Supplier's
responsibility to carry sufficient inventories to cover IAI's total
Material requirements. More particularly, Supplier will use its
logistics expertise to ensure that inventories maintained will be
sufficient to support IAI's planned and unplanned requirements.
4.8 Forecasts
4.8.1 Supplier shall be responsible for the preparation of all forecasts
required to enable Supplier to determine the necessary quantity of
Materials that will be needed to stock the Forward Stocking Location, as
described below. Supplier shall conduct forecast analysis jointly with the
applicable IAI personnel. IAI shall cooperate with Supplier in developing
the necessary data (e.g., build rate, shop usage forecast changes and
delivery location changes) as needed.
4.8.2 IAI will take all possible care to ensure that its input into the
forecasts of consumption is reasonably accurate. IAI will advise Supplier
as soon as practicable of any sudden or unexpected changes in its
Materials requirements. All forecasts and data for Materials, whether
prepared or provided by IAI or not, are provided for the sole
6
CONFIDENTIAL
purpose of aiding Supplier in determining IAI's Materials needs and are
not a commitment by IAI to purchase any quantity of Materials.
5. SERVICES TO BE PROVIDED
5.1. The following are the lists of the types of Services to be provided by
Supplier to IAI, exclusive of the purchasing of Materials from IAI
Approved Sources:
5.1.1. List of Full Service
5.1.1.1. Shipping to the FSL
5.1.1.2. Storage of Material at the FSL
5.1.1.3. Receiving inspection at the FSL
5.1.1.3.1. Including Lab testing as needed, at IAI laboratories
5.1.1.4. Cutting to size / length per given dimensions and / or
sketches provided(1)
5.1.1.5. Signing quality documents and Route Cards
5.1.1.6. Shipping to the IAI receiving dock / production floor/
IAI sub contractors in Israel.(2)
5.1.2. List of Partial Services
5.1.2.1. Same as the list of Full Services in Article 5.1.1 above
except for cutting to size / length
5.1.3. List Of Optional Services - applicable to IAI furnished Material
5.1.3.1. Storage of Material
5.1.3.2. Other Services
5.1.3.2.1. Cutting to size / length per given dimensions
and/or sketches provided(3)
5.1.3.2.2. Signing quality documents and Route Cards
5.1.3.2.3. Shipping to the IAI receiving dock /
production floor
5.2. Order Administration
5.2.1. Supplier shall appoint a senior, properly trained, project manager
for the purpose of the administration of this Agreement. Such
project manager shall act as the point of contact with whom the IAI
Divisions shall interface.
5.2.2. Supplier shall have a database for managing its inventory of
Materials and Orders. Such database shall also include electronic
copies of all Traceability/Quality Documentation. Authorized (by
both parties) personnel of IAI shall have access to Supplier's
database information (including by way of the internet), at all
times, and shall receive copies of back up data from
----------
(1) Cutting methods to include capability of Laser cutting and water jet
cutting using data provided by magnetic media.
(2) Shipping to IAI subcontractors overseas is included, based on the Agreement
prices to IAI in Israel. Packing and shipping costs are not included and
are to be defined on a case by case basis.
(3) Cutting methods to include capability of Laser cutting and water jet
cutting using data provided by magnetic media.
7
CONFIDENTIAL
Supplier. IAI is aware of the competitive sensitivity of such data and
shall not in any form release any of such information to a competitor
of Supplier.
5.3. JIT Delivery Response Times
5.3.1. All deliveries shall be made to the receiving docks or production
floor of the IAI Divisions, according to such Divisions'
instructions, within the time periods set forth in the following
paragraph or the time set forth on the Order/Route Card, whichever
is earlier(4):
5.3.2. Supplier shall provide the Materials to IAI Division not later than
the required delivery date set forth on the Order, or 48 hours from
receipt of such Division Route Card. Supplier will deliver AOG
Orders within 24 hours from receipt of the Order or Route Card.
Delivery must be made prior to noon (12PM).
5.3.3. The Materials shall be delivered cut to size as defined in the
Route Cards provided by the ordering Division or Order. Or in the
data files provided by magnetic media. Cutting requirements may
call for Laser Cutting and Water jet Cutting.
5.3.4. Only the weight of Materials delivered to IAI shall be taken into
consideration when calculating the weight of Materials to be
charged to IAI.
5.4. Due Date
5.4.1. The due date (the "Due Date") for delivery of all Materials shall
be either (i) the date set forth in IAI's Order, or (ii) the
appropriate Delivery Response Time set forth in the table above,
whichever is later. Supplier will proactively expedite all
outstanding Orders. When, for any reason, Supplier becomes aware
that it will be unable to deliver any Materials by its Due Date,
Supplier shall immediately notify the relevant IAI Division in
writing.
5.4.2. Late Delivery
(a) Supplier shall notify the relevant IAI Division in writing if
it will not be able to deliver the Materials by their Due
Date, as follows:
(i) For non - AOG Materials - within 24 hours of receiving
IAI's Order/ Route Card;
(ii) For AOG Materials - within 4 hours of receiving IAI's
Order/ Route Card.
(b) If Supplier fails to deliver Materials by their Due Date, IAI
may, in its sole discretion, do one or more of the following:
(i) Cancel the Order for such Materials (in such event, if
Supplier has already delivered the Materials after the
Due date, it shall take them back at no cost to IAI);
----------
(4) All time periods are measured from the date and time of the Order to the
date and time of delivery to the designated IAI location. Lab test cycle
(where applicable) not included
8
CONFIDENTIAL
(ii) Designate such Materials as Critical/AOG. In such event,
Supplier shall apply a special/expedited procurement
process, including the use of a dedicated buyer to seek such
Materials and/or consult with manufacturers regarding
substitute Materials;
(iii) Seek other sources for such Materials on its own and advise
Supplier of such other sources, and the terms and conditions
they are offering. Supplier shall order such Materials from
such other sources and deliver them in accordance with the
terms of this Agreement; or
(iv) If Supplier fails to purchase such Materials from other
sources, IAI may purchase such Materials directly from third
parties, and Supplier shall pay to IAI the difference, if
any, in all IAI's costs for such Materials, including, but
not limited to, purchasing and shipping.
5.5 Return of Materials
5.5.1. Non-Conforming Materials
(a) Supplier shall, where requested by IAI, accept the return of
non-conforming Materials at all times. Supplier shall deliver
replacement Materials to IAI for non-conforming Materials,
immediately if so requested by IAI (i.e. on an AOG schedule).
Materials shall be non-conforming if they are wrong Materials,
purchased from non-Approved Sources, without the required
Traceability/Quality Documentation, improperly packed, have
failed IAI's Lab Testing, or if they do not meet the
requirements of this Agreement for reasons other than
defectiveness. Supplier hereby agrees that should any dispute
arise with regard to the conformity or non-conformity of
certain Material(s), such dispute shall in no way absolve
Supplier from delivering to IAI, on an AOG schedule, and at no
additional charge, replacement Materials acknowledged by IAI
to be conforming.
(b) Supplier shall, within one week of receiving notice from IAI,
collect the non-conforming Materials from IAI's Division or
such other address as IAI shall notify Supplier, at Supplier's
expense in which event risk of loss shall pass to Supplier
when such non-conforming Materials leave IAI's possession. If
Supplier fails to collect non-conforming Materials within one
week, IAI shall be entitled to return such Materials to
Supplier and Supplier shall reimburse IAI for all costs
incurred. Where IAI has paid Supplier any monies in respect of
non-conforming Materials, title to such Materials shall remain
with IAI until Supplier has reimbursed IAI all monies paid in
respect of such Materials.
(c) For the sake of clarity, the term "Materials" as used in this
Article mean full sized or cut to size Materials.
9
CONFIDENTIAL
5.5.2 Materials in good condition
IAI may return Materials that are in good condition that it no
longer needs. Where such Materials still are in a fully resalable
condition (in their original Supplier, undamaged package, and
include Quality Documentation, where applicable), then Supplier
will return such Materials to stock and credit IAI with a sum equal
to the price paid, or the current market price of such Materials,
whichever is lower.
5.6. Supplier agrees to provide support 5 working days per week. When a
requirement occurs outside of normal business hours (which are 7:00 to
16:00 Sunday to Thursday, and 7:00 to 13:00 Friday, local Israel time) IAI
shall contact Supplier's out-of-hours answering service, and Supplier
shall respond to IAI during the first subsequent business hour.
5.7. Supplier shall be diligent and prompt in responding to IAI's requests for
price quotes and information regarding Materials, in accordance with the
urgency of IAI's needs. If Supplier fails to respond in a timely and
appropriate manner to IAI's requests for information, prices, etc., IAI
may purchase Materials from other sources, as appropriate.
6. SPECIAL PURCHASES
6.1 IAI SUBCONTRACTORS. Supplier agrees that any subcontractor or Supplier
performing work for IAI (herein, an "IAI Subcontractor") that meets
Supplier standard credit requirements, may order Materials and Services
pursuant to the Terms and Conditions of this Agreement, including but not
limited to the Prices / Service Fees set forth herein, provided that such
order references this Agreement and does not negatively affect the
fulfillment of IAI orders. Supplier may request written verification that
the Materials ordered by an IAI Subcontractor pursuant to this Agreement
directly support IAI requirements. Notwithstanding the above, IAI shall
have no liability in connection with any transactions between Supplier and
IAI subcontractor.
6.2 DROP SHIPMENTS. Supplier herein provides IAI with the option to order
Material at the Base price plus Service Fee and to instruct Supplier to
perform Drop Shipment from the FSL to IAI subcontractors (outside of
Israel), at a response time to be mutually agreed upon by the Parties.
Packing and shipping costs are not included and are to be defined on a
case by case basis.
6.3 BACK TO BACK ORDERS. Supplier agrees that if and when IAI issues an order
to Supplier for material which is neither included in Exhibit 1 nor
usually kept in Supplier inventory (herein, a "Back to Back" order)
Supplier shall provide all such material to IAI or to an IAI designated
location, in accordance with the requirements of Exhibit 2 (the Quality
Plan), in one batch and be entitled to a an agreed service fee of ++.
6.4 ASSIGNMENT OF EXISTING IAI SUPPLY CONTRACTS TO SUPPLIER. Supplier herein
provides IAI with the option to assign it existing IAI Supply Contracts
under terms and conditions to be mutually agreed upon by the Parties.
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
10
CONFIDENTIAL
7. DELIVERIES
7.1. Supplier shall deliver the Materials, at its own risk and expense, to any
IAI Division throughout Israel, or to any other reasonably accessible site
chosen by IAI, on the date(s) listed in IAI Orders, as such IAI Orders are
issued from time to time.
7.2. Shipments to any IAI Division must be complete. Any exceptions must be
pre-approved by the ordering IAI Division and, if approved, will be
considered complete on initial shipment. If IAI determines that requests
for under shipments are excessive, Supplier shall provide a corrective
action plan.
7.3. If Supplier delivers quantities in excess of the orders placed pursuant to
this Agreement, IAI may return the excess Materials to Supplier at
Supplier's risk and expense. Materials returned by IAI to Supplier shall
reference the order number.
7.4. Shipments directed by Supplier to the wrong location will be returned to
Supplier at Supplier's expense.
7.5. Materials shall be considered delivered as follows:
7.5.1 When it is delivered to the IAI designated location on the Order/
Route Card, and, as applicable, all required Traceability/Quality
Documentation is physically located at Supplier's facility (and
fully available for Buyer's viewing on the internet/EDI system as
per Article 4.6). IAI requests for backup Traceability/Quality
Documentation shall be responded to by fax within two hours during
normal business hours and, if requested after such business hours,
by 9:00 A.M. the next morning. Notwithstanding the forgoing, all
such Traceability/Quality Documentation shall be considered to be
the property of the Supplier at all times, and (a) IAI shall have
limited rights as imposed by the applicable Manufacturer (or other
relevant third party) to copy such documentation, and (b) Supplier
shall turn over copies of such documentation to IAI promptly upon
its request. Supplier shall keep such documentation until the
earlier of (i) IAI's written direction to Supplier to do otherwise,
and (ii) ten (10) years from the date of delivery of the
corresponding Materials to IAI. Further, at the request of the
ordering IAI Division, Supplier shall include copies of relevant
original documentation with each Materials shipment. Finally,
Supplier shall provide IAI with a CD ROM not less frequently than on
a quarterly basis containing copies of all Traceability/Quality
Documentation for the Materials delivered during the previous
quarter.
7.5.2 In addition, IAI shall not be deemed to have accepted any Materials
until IAI has used the Materials or after the expiration of two
weeks from delivery (whichever occurs first).
7.6 IAI shall have full rights to validate quality or delivery quantities at
any time. Any quantity discrepancies found shall be immediately adjusted
by Supplier through the issuance of a credit.
11
CONFIDENTIAL
8. TECHNICAL AND PRODUCT SUPPORT
(a) Obsolescence Analysis, Alerts and Marketing
Supplier shall inform IAI expeditiously of any changes it becomes
aware of with respect to Materials, including, but not limited to,
superceding, deletion, or addition of such Materials, whether by
Service Bulletin modification or other such means, of a Material. In
respect of any Materials or other stock already purchased by IAI,
Supplier shall advise IAI on the marketability of such Materials or
stock. Supplier shall assist IAI in marketing obsolete inventory if
requested by IAI.
(b) New Products
Supplier shall make IAI aware of new products and/or systems which
may become available and which may be of interest to IAI
(c) Updates
Supplier shall update IAI with any change/update in Material
specifications and/or Technical Data Sheets.
9. PRICES
9.1 Prices for Materials are as listed in Exhibit 1 to this Agreement ("Base
Price(s)"). Such Base Prices refer, for Aluminum Plates and Sheets, to the
Materials as purchased from the manufacturer, and, for all other Material
type as described in Exhibit 3 to this Agreement, to the Supplier FSL
prices.
9.2 The Base Prices apply throughout 2005. The 2005 Prices for Materials shall
be adjusted as follows:
9.2.1 For Aluminum Plates, prices for the years 2006 and 2007 shall be
increased by ++ each year to the previous year.
9.2.2 For Aluminum Sheets, prices for the years 2006 and 2007 are listed
in Exhibit 1 to this Agreement.
9.2.3 For all other Material type as described in Exhibit 3 to this
Agreement, prices shall be reviewed by the Parties not more than
once every six (6) months, and if mutually agreed, adjusted as
agreed.
9.3 The all-inclusive, full prices for Materials ("Price(s)"), which include
all charges relating to Supplier's obligations under this Agreement,
including, inter alia, transportation costs, insurance, Lab Tests(5), and
adherence to IAI's updated Quality Plan, plus profit ("Service Fee"),
shall be calculated as follows: Base Price plus a Service Fee. The level
of the Service Fee for each purchase shall be calculated as per Exhibit 3
hereto.
----------
(5) The Parties agree to revisit the subject of Lab Tests from time to time,
but not more than once every twelve (12) months.
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
12
CONFIDENTIAL
Exhibit 1 may be updated/changed only by mutual agreement, and Materials
may be added to, or subtracted from, Exhibit 1 only by mutual agreement.
Prices for Materials appearing on Exhibit 1 shall be the best market
prices provided by Supplier to its customers.
9.3.1 If:
(a) Supplier locates a new source of Materials that is less costly
than at such time is shown on Exhibit 1, or
(b) Supplier is able to negotiate better prices with existing
sources,
then Supplier shall notify IAI. IAI shall have sole discretion as to
whether to approve such new source of supply. If IAI does approve
such new source of supply (either manufacturer or distributor)
and/or new pricing, and/or better prices from existing sources,
Exhibit 1 will be amended accordingly. In all such cases, to the
extent that such reductions in prices of Materials are not due to
changes in general market price conditions, the savings will be
shared 50/50% by the Supplier and IAI. Such new pricing shall apply
to new Orders issued after the aforementioned amendment of Exhibit
1, or to the undelivered portion of open Orders.
9.4 New Materials
Materials that are not listed on Exhibit 1, as amended by the Parties, are
designated as New Materials. The Parties hereby affirm that they are
desirous to add New Materials to this Agreement. Prices of New Materials
shall be determined as follows:
(a) Supplier shall propose to IAI competitive prices no greater than the
lowest prices charged by Supplier to its other customers for such
Materials. Supplier shall provide IAI with such price quotations
within 48 hours after IAI's request. Should the Parties agree on a
price for a particular Material, and agree that such Material should
be included in Exhibit 1, and thereby governed by the terms of this
Agreement, then such Material shall be added by IAI to Exhibit 1 and
all subsequent transactions involving such Material shall be governed
by the terms of this Agreement.
(b) Supplier shall inform the IAI Division requesting a quote on a New
Material of any previous quotes provided to other IAI Division(s) for
the same type of Material.
(c) In the event that Supplier and the relevant IAI Division agree to
purchase material outside of Exhibit 1, with such purchase order not
being deemed "New Material" as described above, then, the Parties
agree that (i) the base price shall be comparable to the base prices
of similar Material appearing on Exhibit 1; (ii) the Service Fee
applicable to such purchase order shall be the same as per Exhibit 3;
and (iii) in cases where the material is not considered standard by
the Supplier, the remains of the ordered material shall be, at IAI
option, either delivered to the IAI Division or stored at Supplier
site in accordance with Exhibit 4 to this Agreement
13
CONFIDENTIAL
9.5 Change of Prices
(a) The prices of Materials during the Term extension periods, if any,
shall be increased or decreased as follows:
(i) Provided that IAI is considering to extend the three (3) year
Term of this Agreement, as per Article 12 below, then six (6)
months prior to the expiration of such three (3) year period,
the Parties shall meet to review the prices of Materials in the
market ("Price Review"). If at such time the prices of certain
Materials have changed by at least ten percent (10%) from the
Base Prices as they are then listed in Exhibit 1, then the
Parties shall negotiate and modify the respective Base Prices of
such Materials accordingly. The agreed Base Prices shall be in
effect for the next two (2) one-year options. In the case where
the Parties cannot agree on new Base Prices for such Materials,
then the Party requesting such changes in price may cause the
removal of such Materials from Exhibit 1 at the earliest of: (i)
six months from the onset of the Price Review, or (ii) in the
case where IAI requests such changes in Price, the depletion of
Supplier's inventory of such Materials.
(ii) Provided that IAI is considering to again extend the Term of
this Agreement, as per Article 12 below, such Price Review shall
also occur six (6) months prior to the conclusion of the fifth
(5th) year of this Agreement under same terms and conditions as
described above, and the resulting agreed Base Prices shall be
in effect for the next two (2) one-year options.
(b) IAI may request written or printed substantiation, in the form of
Manufacturers' letters, price lists or catalogues, to support
negotiation for any price increases requested by Supplier, or request
three Party meetings with Manufacturers and Supplier to substantiate
such request for price increase.
(c) Unless otherwise expressly agreed by IAI, any change (up or down) in
prices in accordance with the provisions of this Agreement, shall
take effect on the date agreed upon and shall apply to all Orders
placed by IAI after the date of the change in prices. Such new
pricing shall apply to new Orders issued after the aforementioned
amendment of Exhibit 1, or to the undelivered portion of open Orders.
(d) IAI and Supplier may enter into different pricing arrangements (for
example, but not limited to, long term fixed prices) to satisfy IAI's
customers needs or specific project requirements.
(e) Twice a year Supplier shall pass on to IAI any discounts and/or
rebates that it receives from Manufacturers based upon IAI's specific
purchases under this Agreement.
14
CONFIDENTIAL
(f) In the case where IAI's requirement for particular Materials
increases dramatically due to newly awarded projects, or due to other
such reasons, then the Parties shall negotiate new prices for such
Materials in order to account for such larger purchases.
9.6 Prices of Materials shall be as described in Article 9.1 or 9.2 above, for
the three year Term of the Agreement, and, except as described in Article
9.5(a)(i) above, at IAI's sole option and discretion may either (i) remain
fixed for each of the subsequent option years or (ii) be renegotiated
prior to the commencement of each subsequent option year.
9.7 IAI has the right to audit Supplier's FSL Prices at Supplier site.
Supplier agrees to provide full transparency to IAI regarding its
purchasing prices for materials purchased under this Agreement regardless
if the material is listed in Exhibit 1 to this Agreement.
10. INVOICING AND TERMS OF PAYMENT
10.1 (a) Buyer shall issue Orders to Supplier for Materials. Supplier shall
then make deliveries according to IAI's Orders and provide a separate
invoice for each group of Materials delivered in response to an
Order. The invoice shall be provided to the relevant IAI
Division/Group accounting department. Any objection by IAI to payment
due to discrepancies in an invoice, or part thereof, shall be given
to Supplier in writing.
(b) For purposes of this Article 10, the "receiving date", "date of
receipt" or the "date Materials are received" shall be the latest of
(i) the date Materials are properly delivered, and (ii) the Due Date
for the delivery of such Materials.
(c) IAI shall verify the Supplier invoices, based on the calculated
weight of the supplied material. Weight will be calculated by IAI at
the receiving point, using Specific gravity values used by IAI, which
may differ from those used by Supplier. Supplier acknowledges that
the IAI set of Specific gravity values has been provided to Supplier
by IAI.
(d) All prices, invoices and payments will be stated and paid in U.S
dollars. VAT, if applicable, will be stated and paid in New Israeli
Shekels.
10.2 Payment terms for invoices approved for payment shall be net 90 days from
the date of the invoice. IAI pays its Suppliers on the middle of the month
and the last day of the month (the "Invoice Payment Dates"). Therefore, it
is agreed that payment of some invoices may be extended, beyond ninety
days, to the next Invoice Payment Date. On each Invoice Payment Date IAI
will pay all approved, past due invoices.
15
CONFIDENTIAL
11. PACKING AND DOCUMENTATION
11.1 Supplier shall comply with all applicable standards for packing and shall
ensure that all containers and packing it uses are of sound materials free
from defects and fit for the purpose for which they are intended.
11.2 Supplier shall ensure that all Materials supplied are accompanied by the
proper release documentation as required by IAI, with a minimum
requirement of the COC of the Shipper. Supplier guarantees that any
document required to substantiate Traceability or quality can be provided
to IAI within the time period set forth in Article 7.5.1.
11.3 In the event that Supplier fails to comply with the provisions of this
Article 11, IAI reserves the right to refuse to accept delivery of the
container or package concerned and such container or package shall be
returned to Supplier at Supplier's expense.
12. TERM OF AGREEMENT
12.1 The term of this Agreement shall be for a period of three (3) years
beginning with the Commencement Date and ending on the third anniversary
thereof (the "Term").
12.2 IAI shall have the option to extend the Term of this Agreement for four
(4) additional one (1) year terms under the same terms and conditions set
forth herein, including inter alia, the prices contained in Exhibit 1.
Such option may be exercised by IAI in writing not later than four (4)
months prior to the end of each period. The terms and conditions of this
Agreement shall apply during the renewal terms.
13. QUALITY
13.1 Supplier shall comply with all of the quality requirements set forth in
the Quality Plan, which is attached hereto and incorporated herein as
Exhibit 2. Supplier must ensure that all Materials supplied are purchased
from an Approved Source and in a factory new condition. IAI may modify the
list of Approved Sources, on a case-by-case basis, to enlarge or reduce
the list of vendors/manufacturers/sources to be used in such
circumstances. IAI's general policy is to attempt to limit the total
number of such sources to the extent possible.
13.2 Supplier shall always obtain and hold all original Certificates of
Conformity for Materials issued by the Manufacturers of such Materials at
no additional charge to IAI. Supplier shall also obtain other
Traceability/Quality Documentation for Materials according to IAI's
requests and on the terms offered by Manufacturers. In addition, if
Materials are obtained through a distributor or agent approved by IAI,
Supplier shall obtain from the distributor/agent documentation to prove
Traceability back to the Manufacturer.
13.3 IAI and Supplier shall each designate a quality assurance person to act as
its Quality Assurance ("Q.A.") Representative. The Q.A. Representatives
shall establish a procedure for the coordination of IAI and Supplier
quality assurance efforts.
16
CONFIDENTIAL
13.4 Supplier shall not substitute the ordered Materials with alternative
Materials or alternative sources of supply without the express written
permission of IAI.
13.5 Inspection by IAI at any time shall not relieve Supplier of responsibility
or liability for Materials and shall not imply acceptance thereof.
13.6 Supplier shall not change the part number or standard of any Materials
without the prior agreement and written authorization of IAI. Supplier
shall promptly notify IAI in writing of any proposed or actual change to a
part number or standard that it knows about. Supplier shall provide IAI
with a copy of such authorization that will be forwarded by fax, prior to
delivery of the Materials.
13.7 Supplier shall bear all IAI costs involved in certifying manufacturers and
distributors or when upgrading(6) manufacturers to IAI's "Preferred
Supplier" quality status, for the purposes of this Agreement, where such
certification is done at the request of Supplier. In the case where the
Parties agree that such certification will lead to a direct price benefit
to IAI, then the Parties shall share the cost of such certification. If
such certification involves New Materials identified by IAI, or if IAI
demands a change of manufacturer or distributor, or if a manufacturer or
distributor is proposed for the sole purpose of giving IAI a quality
benefit, then such costs shall be borne by IAI. IAI herein provides
Supplier with a list of all existing manufacturers and distributors that
are Approved Sources, as per Exhibit 9 to this Agreement. This list shall
appear on the EDI/internet system. IAI may amend or modify Exhibit 9 and
such modification will be reflected on the EDI/internet system.
13.8 With regard to Materials sent to IAI for Lab Testing, Supplier also shall
be responsible for supplying any and all of tests specimens required for
such Lab Testing. Lab tests shall be performed at IAI Material laboratory
only.
13.9 All software employed by Supplier for the management of quality-related
matters (e.g., software for determining which lots of Materials are to be
Lab-Tested), must be approved by IAI's Quality personnel prior to
implementation of such software, such approval not to be unreasonably
withheld.
13.10 IAI shall have the right to inspect and audit any work performed by
Supplier and its Suppliers for the purpose of monitoring compliance with
the quality assurance standards deemed applicable by IAI.
13.11 All inspections and audits by IAI's representatives shall be performed in
such a manner as to not delay or hinder the Supplier; however, Supplier
shall in no way be relieved of its obligations concerning the required
delivery date, because of the performance of the inspections and the
audits.
14. TAXES AND EXPORT
14.1 Any and all sales and property taxes and other similar taxes on Materials
and any and all other costs or liabilities associated therewith are
included in the prices hereunder and shall be the sole responsibility of
Supplier.
----------
(6) Such as technical survey and repeated updates
17
CONFIDENTIAL
14.2 Supplier shall be responsible for obtaining all necessary export licenses,
and the payment of all export charges, required for the export of
Materials. IAI will assist Supplier and provide all necessary data for
obtaining such export licenses.
15. WARRANTY
15.1 Supplier hereby warrants that for a period of ten (10) years ("Material
Warranty Period"), or for the full term of the Manufacturer's warranty (to
be calculated from the date of delivery to IAI or to IAI sub contractors
purchasing Material for an IAI program), whichever is greater, the
Materials provided to IAI shall comply with the requirements of the
Quality Plan and shall be free from defect in material and workmanship,
and such Material shall be delivered free and clear of any security
interest or other lien or encumbrance. In the event that Materials are
defective in any way, Supplier shall replace such defective Materials in
accordance with the Delivery Response Time applicable to the relevant
Materials. Supplier shall within a reasonable time, collect the defective
Materials from the IAI Division or such other address as IAI shall notify
Supplier, at Supplier's expense, in which event risk of loss shall pass to
Supplier when such defective Materials leave IAI's possession. If Supplier
fails to collect defective Materials within a reasonable time, IAI shall
be entitled to return such Materials to Supplier and Supplier shall
reimburse IAI for all costs incurred. In no event shall Supplier be liable
for incidental or consequential damages.
15.2 In the event that Supplier fails to timely replace defective Materials, in
addition to IAI'S right to activate the Performance Bond, IAI shall be
entitled to a refund of the purchase price of the defective Materials, and
shall be entitled to terminate this Agreement pursuant to Article 16.1
below.
15.3 All replacements under the Material Warranty and Service Warranty (both
together the "Warranty") shall be performed by Supplier at its expense,
and with reasonable care and dispatch. The freight charge for the return
shipment by IAI or the subcontractor of defective material to be replaced
under this Warranty, shall be at Supplier's expense.
15.4 THIS WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED (INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE AND ANY IMPLIED
WARRANTY ARISING FROM THE COURSE OF PERFORMANCE, COURSE OF DEALING. OR
USAGE OF TRADE), OF ANY NATURE WHATSOEVER, WHETHER ARISING IN CONTRACT,
TORT OR NEGLIGENCE OF ANY DEGREE, STRICT LIABILITY OR OTHERWISE, AND IAI
HEREBY WAIVES ALL WARRANTIES AND ASSUMES ALL RISKS AND LIABILITIES IN
RESPECT THEREOF, EXCEPT THAT IAI DOES NOT WAIVE, AND HEREBY RESERVES ITS
RIGHTS WITH RESPECT TO, ANY NEGLIGENCE OR WILFULL MISCONDUCT OF SUPPIER
EXCEPT AS PROVIDED IN PARAGRAPHS 1.1 THROUGH 1.4 ABOVE, THE EXTENT OF
SUPPIER'S LIABILITY UNDER THIS WARRANTY SHALL NOT EXCEED THE COST OF
REPAIRING OR REPLACING ANY DEFECTIVE MATERIAL/S OR SERVICES AS AFORESAID
OR CORRECTING ANY DESIGN DEFECT.
18
CONFIDENTIAL
16. TERMINATION
16.1 Either Party may terminate this Agreement if the other Party has defaulted
in the performance of any of its obligations under this Agreement and such
default continues uncured for a period of ninety (90) days after written
notice of such default from the non-defaulting Party. It shall, inter
alia, be valid grounds for termination under this Article 16.1, that: (a)
IAI finds that prices (offered by Supplier) are consistently higher than
market prices and Supplier has not reasonably negotiated new pricing with
IAI, as per Article 9.3; (b) Supplier, on more than one occasion,
declines to supply IAI with Materials, in cases where IAI finds third
parties with lower prices than Supplier's prices, on terms similar to such
third parties; or (c) Supplier is chronically late in supplying Materials.
16.2 (a) IAI may terminate this Agreement if it determines that a termination
is in its interest. IAI may terminate under this Article 16.2 by
delivering to Supplier a written Notice of Termination specifying the
extent of termination and the effective date. IAI shall give such
Notice of Termination at least six (6) months in advance of the date
of termination for interest.
(b) If IAI terminates the Agreement per Article 16.2(a) above, then for
the first three (3) months of such notice period, the Parties shall
continue to perform this Agreement in accordance with its terms.
During the last three (3) months before the termination date,
Supplier shall not be obligated to replenish its inventory of
Materials in the Allocated Stock, unless IAI shall request such
replenishment and commits to purchase the amount so requested, it
being agreed that, during such last three (3) months, Supplier may
sell to third parties any Materials in the Allocated Stock which IAI
has not advised Supplier it intends to purchase.
16.3 IAI may terminate this Agreement as to specific Materials as a result of
canceled requirements resulting from engineering changes or changes in
demand.
16.4 IAI shall have the right to terminate this Agreement for default, if
Supplier enters into liquidation (whether voluntary or otherwise), if any
distress or execution shall be levied on its equipment (i.e. the authority
so executing takes actual possession of an asset) or if a receiver,
administrator, administrative receiver, custodian or manager is appointed
over the whole or any part of its assets, compounds or makes any
arrangement with its creditors or commits any act of bankruptcy or suffers
any analogous proceedings under other law.
17. INDEMNIFICATION
17.1 Supplier shall indemnify and hold harmless IAI and its officers,
directors, agents and employees (together, in this Article 17, the
"Indemnitees"), against all liability, obligations, claims, losses,
damages, including, without limitation, expenses, reasonable attorneys'
fees and disbursements and judgments (whether in contract, tort,
negligence of any degree, strict liability or otherwise) which may be
suffered by, accrued against, charged to or recoverable from the
Indemnitees by reason of loss of, damage to, or loss of any property of
the Indemnitees or any others, or any damage of any nature suffered by any
third party, including, but not limited to, bodily injury and/or death:
(A) caused or created by Supplier or its subcontractors, or the officers,
19
CONFIDENTIAL
directors, agents and employees of either, arising directly or indirectly
out of, as a result of or in connection with Supplier's negligent
performance of its obligations hereunder; or (B) arising directly or
indirectly out of, as a result of or in connection with the death of, or
injuries suffered or allegedly suffered by, employees of Supplier or its
subcontractors (1) in the course of their employment; (2) in the
performance of Supplier's obligations hereunder; or (3) at the IAI
Divisions or upon other premises owned or controlled by IAI, whether or
not caused by the negligence of IAI. Supplier shall give IAI written
notice of any death or injuries suffered or allegedly suffered by
employees of Supplier or its subcontractors, within thirty (30) days after
any incidents. Should any such loss, injury, or death be caused solely by
the gross negligence and/or willful misconduct of IAI, its employees, or
its agents, the foregoing indemnification provision shall not apply
thereto.
18. INSURANCE
18.1 During the Term of this Agreement Supplier shall maintain Comprehensive
General Liability Insurance coverage of not less than ++ and Automobile
Public Liability and Property Damage coverage of not less than ++
providing full coverage for any damages, injuries, losses or other harm,
caused to Supplier's employees, agents or subcontractors, and their
equipment and/or vehicles, or to third parties, or to IAI's employees,
property, or agents, while on IAI's Facilities or other premises owned or
controlled by IAI. Supplier shall also provide evidence of all requisite
Worker's Compensation (with statutory limits) or Employer's Liability
Insurance with a limit of not less than ++ per occurrence and in the
aggregate, together with evidence reasonably satisfactory to IAI that such
insurance covers Supplier's employees, agents, and representatives.
Supplier shall also maintain during the Term of this Agreement and for a
period of three (3) years thereafter, an Aviation Product Liability policy
with a limit of not less than ++ per occurrence and in the aggregate.
Supplier, shall, upon request, deposit certificates evidencing all such
insurance policies with IAI and/or shall submit such policies to IAI for
inspection.
18.2 Such policies shall be primary insurance, and any insurance in the hands
of IAI which may cover the risks insured under Supplier's policies shall
be excess insurance and not contributory. Such policies shall not be
canceled or amended in any way that may adversely affect IAI's rights and
interests. Any intended cancellation or change shall be subject to IAI's
approval. Finally, Supplier shall submit to IAI certificates of insurance
evidencing such policies at least ten (10) days before the Effective Date
of this Agreement, and subsequently within ten (10) days prior to the
renewal of any such policies that have expired.
18.3 Supplier shall ensure that all of its employees, servants and agents shall
obey all instructions and directions issued by IAI whenever on IAI's
premises and shall comply with all local regulations and security
restrictions that may be in force from time to time with respect to IAI's
premises.
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
20
CONFIDENTIAL
18.4. In the event that IAI exercises its option to require Supplier to stock
IAI Materials as per Attachment J Exhibit 4, Supplier shall obtain the
following additional insurance containing the same terms as described in
18.2 above.
18.4.1. All-risk property including earthquake insurance and in-transit
coverage in an amount equal to the greater of ++ or the value of
the IPM Materials in the FSL. IAI shall be named as Additional
Insured, and IAI shall be named as Loss Payees under the policy,
and the insurer shall waive any and all rights of subrogation with
regard to this Agreement.
18.5 Supplier shall provide IAI certificates of insurance evidencing Supplier's
possession of effective policies as described above. And will provide such
upon each renewal thereof.
19. AUDIT
19.1 During the Term, Supplier shall make available to IAI or its authorized
representative its audited financial statements on an ongoing, regular
basis. Supplier also shall provide IAI with immediate written notification
of any significant change in Supplier's financial condition. In addition,
IAI shall have the right to perform quality audits of Supplier's
facilities, from time to time, as deemed necessary by IAI.
19.2 To the extent required by IAI's customers or government regulations,
Supplier shall maintain all quotes from Manufacturers of Materials
delivered to IAI for a period of four (4) years. Supplier shall cooperate
with IAI, to the extent applicable, in providing financial
information/records required by IAI's customers.
20. CONFIDENTIAL AND PROPRIETARY INFORMATION; PUBLICITY
20.1 All the Disclosures provided by either Party to the other in connection
with this Agreement (the Party providing any such Disclosure shall be
herein referred to as the "Disclosing Party" and the Party receiving any
such Disclosure shall be herein referred to as the "Receiving Party"), as
well as all Proprietary Information obtained in any way, shall be treated
by Receiving Party as confidential and shall not be disclosed by the
Receiving Party to any third party without the Disclosing Party's written
consent unless and until (i) the Disclosure or the relevant Material
thereof is or enters into the public domain otherwise than through the
default of the Receiving Party, (ii) the Disclosure was properly known to
the Receiving Party before receipt from the Disclosing Party, or (iii) the
Receiving Party is required to disclose the Disclosure pursuant to
governmental or judicial action.
Notwithstanding the foregoing, any Proprietary Information disclosed
pursuant to governmental or judicial action, shall otherwise continue to
remain Proprietary Information, subject to the restrictions of this
Agreement.
In addition, the (a) burden of proof shall lie with the Receiving Party to
demonstrate that one of the above-listed exceptions applies and (b) the
Receiving Party shall notify the Disclosing Party in writing of the
Receiving Party's intent to make the Disclosure based on one of the
above-listed exceptions at least 30 days in advance (including a
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
21
CONFIDENTIAL
description of the information to be disclosed and the basis for the claim
of exception).
20.2 The Receiving Party shall not use the Disclosure referred to in this
Article 20.1 or allow it to be used for any purpose other than for the
performance of this Agreement and the Receiving Party shall ensure that
all persons to whom the Disclosure is disclosed shall enter into an
undertaking on similar terms to the provisions of this Article 20. Insofar
as a Disclosure is no longer necessary in order to carry out any
obligation under this Agreement it shall be returned to the Disclosing
Party and in any event shall be returned to the Disclosing Party upon
termination of this Agreement.
20.3 The Receiving Party warrants that: (i) it will hold in the strictest
confidence all data received from manufacturers and other third parties
that pertain to this Agreement and (ii) it will not use such information
in any way other than for the strict and limited use of performing under
this Agreement.
20.4 Supplier warrants that the supply of the Material and its use will not
infringe any rights in intellectual property (including, without
limitation, copyright and patent) belonging to third parties.
20.5 Neither Supplier nor any of its employees, agents or subsidiaries shall,
without the prior written consent of IAI, which may be withheld by IAI in
its absolute discretion, permit or authorize the making of any reference
to this Agreement or to IAI and its business in any medium, including,
without limitation, any publication, journal or newspaper or in any radio
or television broadcast.
20.6 Any request by Supplier to make any such reference shall be made in
writing to IAI and shall be accompanied by a copy of all announcements,
photographs and other documentation whatsoever and details of the medium
for advertisement or announcement together with such other information or
documentation as IAI may request.
21. MISCELLANEOUS SUPPLIER PERFORMANCE
21.1. After the first six (6) months of the Term, Supplier's on time deliveries
to the Due Date as determined monthly by a Status Report must meet or
exceed ninety-eight percent (98%). Supplier shall maintain ninety-nine
percent (99%) first time quality rating according to IAI's Supplier rating
system.
21.2. Supplier shall provide the following two reports to IAI on a monthly
basis: (i) an Inventory Report, and (ii) a Sales Report with sales broken
down by IAI Division.
21.3. Neither Party shall assign, subcontract or otherwise dispose of any rights
or obligations under this Agreement without the other Party's prior
written consent. Any attempted assignment, subcontract or other
disposition without such prior written consent shall be null and void.
21.4. Supplier acknowledges that IAI is bound by preexisting contracts with
certain Suppliers and/or Manufacturers for certain materials, other than
those included in Exhibit 1. Supplier acknowledges that this Agreement
covers only those Materials listed on Exhibit 1 (as such exhibit may be
amended by the Parties), and IAI may purchase so-called "New Materials"
from whomever it desires.
22
CONFIDENTIAL
21.5. Supplier agrees that where IAI's customers or government regulations do
not allow IAI to purchase Materials through the Supplier, IAI may purchase
Materials from other sources.
21.6. Both parties acknowledge the economic interdependence of their respective
businesses. As a result of this dependency, there is a mutual need to
continuously strive to lower overall operating costs without reducing the
quality of end products or services. IAI will strive to operate more
efficiently and cost effectively by consolidating its acquisition of
Materials through this Agreement. Supplier, when practical, will introduce
IAI to new Suppliers and/or Manufacturers of Materials in an effort to
lower costs.
21.7. Supplier and IAI are contractors independent of one another, and neither
shall have the right to bind the other to any third person or otherwise
unless expressly agreed to in writing and signed by both Parties hereto.
21.8. Performance Bond. As a guarantee of Supplier's performance of its
obligations under this Agreement, Supplier shall deliver to IAI an
unconditional bank guarantee substantially in the form of Exhibit 8,
issued by a first class Israeli, European or U.S. bank approved by IAI in
advance, in the total aggregate amount of US $300,000 (the "Performance
Bond") The Performance Bond shall be valid from the Effective Date and
remain valid through the term of the Agreement, extensions, if any,
through the end of the last Warranty period under this Agreement. If
Supplier breaches any of its obligations under this Agreement, IAI may, in
addition to any other remedy it has under this Agreement and at law, draw
on such Performance Bond as fixed agreed liquidated damages and not as a
penalty
22. OFFSET
Supplier undertakes and commits to enter into commercial transactions with
(i) Israeli entities, including, without limitation, IAI, and (ii)
entities which are identified by IAI in the following countries other than
Israel (which list of countries may be amended from time to time):
Switzerland, England, Finland, Belgium, Spain, Turkey, and Romania, all in
accordance with the Umbrella Industrial Cooperation Agreement of the State
of Israel, annexed hereto as Exhibit 7. Offset credits generated by
Supplier in the countries identified above, shall be for the exclusive use
of IAI to fulfill its past, present and future (i.e., arising after the
date of this Agreement) offset obligations generally. IAI has, and shall
retain, the right to assign all such offset credits to third parties.
Supplier shall assist and support IAI in obtaining offset credits in the
amount required by this Agreement.
23. DISPUTE RESOLUTION AND LAW
23.1 The Parties agree to use their best efforts to settle amicably all
disputes arising out of or relating to this Agreement. Such settlement
efforts shall be (i) carried out for one (1) week by IAI's Contract
Manager and Supplier's Contract Manager; (ii) if not so resolved, then,
for an additional one (1) week period, by IAI's General Manager of
Corporate Procurement and Logistics and two (2) directors of Supplier.
Should the Parties be unable to resolve any dispute, the matter shall be
referred to final and
23
CONFIDENTIAL
binding arbitration. The arbitration shall be held in Israel/New York,
NY(7), in the English language, according to the laws and regulations of
Israel/New York, NY(10), before a panel of three (3) arbitrators. Each
Party shall appoint one (1) of the arbitrators with the third arbitrator
being appointed by mutual agreement of the other two (2) arbitrators. In
the event of the failure of one of the Parties to appoint an arbitrator
within thirty (30) days of the other Party's written request for
arbitration, or in the event of the two (2) appointed arbitrators failing
to agree upon the third arbitrator within thirty (30) days of their
appointment, the remaining unappointed arbitrator/s shall be appointed by
an officer of the American Arbitration Association. The applicable
substantive, evidentiarry and procedural law for such arbitration shall be
the laws of Israel/New York, NY(10). The arbitrators shall render their
final decision in writing giving a full explanation for the basis of their
decision. The decision of the arbitrators shall be enforceable, inter
alia, in the courts of Israel, Europe or the United States. Unless the
arbitrators determine otherwise, each Party shall bear its own costs and
expenses in connection with the arbitration.
23.2. The Parties shall comply with all applicable laws of the State of Israel,
including, but not limited to, those relating to security, health, safety,
environment, labeling, and transportation.
23.3. Supplier shall comply with IAI'S security rules and regulations and IAI's
safety rules.
24. IAI STOCK
24.1. See Exhibit 4 Storage of IAI stock at the FSL.
24.2. Supplier hereby commits to store IAI stock at the FSL in accordance with
the terms and conditions contained in Exhibit 4.
25. MISCELLANEOUS
25.1. Notices. All notices, requests, demands and other communications required
or permitted to be given hereunder shall be in writing and shall be deemed
to have been given when received, if delivered in person, or six (6)
business days following the mailing thereof, if mailed by certified first
class mail, postage prepaid, return receipt requested, or five (5)
business days following the delivery thereof to an acknowledged
international courier service, if sent by courier, as follows:
If to Supplier, to:
SCOPE - METAL TRADING & TECHNICAL SERVICES LTD.
Park - Reem (Mivza), X.X. Xxx 0, Xxx Xxxxx, 00000
Israel
Attention: Xxxx Xxxxxxx
Project manager
----------
(7) The final location shall be decided as follows: If Israeli Bidder is
awarded the agreement, the location shall be in Israel. Otherwise, the
location shall be New York, NY.
24
CONFIDENTIAL
If to IAI, to:
ISRAEL AIRCRAFT INDUSTRIES LTD.
XXX XXXXXX XXXXXXXXXXXXX XXXXXXX 00000
XXXXXX
Attention: Xxxxxx Xxxxxxxxx
Head of Mechanical Procurement
Dept. 9600
or at such other address or addresses as either Party may have advised in
the manner provided in this Article 25.1.
25.2. Complete Agreement. This Agreement, together with its exhibits, sets forth
the entire agreement of the Parties with respect to the subject matter
hereof and supersedes all prior agreements, contracts, promises,
representations, warranties, statements, arrangements and understandings,
if any, among the Parties hereto or their representatives. No waiver,
modification or amendment of any provision, term or condition hereof shall
be valid unless in writing and signed by the Party to be charged therewith
and any such waiver, modification or amendment shall be valid only to the
extent therein set forth.
25.3. Further Assurances. Each of the Parties hereto shall, from time to time
after the signing of this Agreement, upon the request of the other Party
hereto and at the expense of such requesting Party, duly execute,
acknowledge and deliver or cause to be duly executed, acknowledged and
delivered, all such further instruments and documents reasonably required
to further effectuate the intents and purposes of this Agreement.
25.4. Binding Effect. This Agreement shall be binding upon and inure to the
benefit of the Parties hereto and their respective successors and
permitted assigns.
25.5. Separability. Any provisions of this Agreement which may be determined by
competent authority to be prohibited or unenforceable in any jurisdiction
shall, as to such jurisdiction, be ineffective to the extent of such
prohibition or unenforceability without invalidating the remaining
provisions hereof, and any such prohibition or unenforceability in any
jurisdiction shall not invalidate or render unenforceable such provision
in any other jurisdiction.
25.6. Counterparts. This Agreement may be executed in one or more counterparts,
each of which shall be deemed an original and all of which taken together
shall constitute a single agreement.
25.7. Captions. The captions appearing in this Agreement are inserted only as a
matter of convenience and for reference and in no way define, limit or
describe the scope and intent of this Agreement or any of the provisions
hereof.
25.8. Supplier shall assist IAI when IAI requests information (e.g., address
changes, quality system certifications) from Supplier regarding Supplier's
manufacturing sources.
25.9. Survivability. The following terms of this Agreement shall survive its
expiration: Supplier's responsibility to maintain Traceability/Quality
documentation (Article 7.5.1), and the terms contained in Articles 13, 15,
17, 20 and 22.
25
CONFIDENTIAL
IN WITNESS WHEREOF, the Parties have executed this Agreement to be effective as
of the 7 day of July 2004.
ISRAEL AIRCRAFT INDUSTRIES LTD. (SCOPE - METAL TRADING &
TECHNICAL SERVICES LTD.)
By /s/ ++ By /s/ Xxxxxx Shiloh
---------------------------------- -------------------------------------
Name: ++ Name: Xxxxxx Shiloh
Title: ++ Title: General Manager
Date: 7.7.04 Date: 7/7/04
By /s/ ++ By /s/ Xxx Xxxxx
---------------------------------- -------------------------------------
Name: ++ Name: Xxx Xxxxx
Title: ++ Title: CFO
Date: 7/7/04 Date: 7/7/04
LIST OF EXHIBITS
Exhibit 1 - List of Materials and Prices
Exhibit 2 - Quality Plan
Exhibit 3 - Supplier Service Fees
Exhibit 4 - Storage of IAI Stock at the FSL
Exhibit 5 - IAI standard terms and conditions
Exhibit 6 - EDI system requirements
Exhibit 7 - Umbrella Industrial Cooperation Agreement
(Non Applicable to Israeli Company)
Exhibit 8 - Format of the Bank Guarantee (Deleted)
(Deleted by Amendment # 2 to the RFP dated march, 18th, 2004.
Exhibit 9 - List of IAI Approved Suppliers / Manufacturers (ASL)
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
26
CONFIDENTIAL
SUPPLY AGREEMENT
FOR MATERIAL
EXHIBIT 1
LIST OF MATERIALS AND PRICES
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD. EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE
IAI CAT. PRICE
# No. P/N DESCRIPTION UOM [$/LB]
--- --------- --------------------------- -------------------------------------------------------------------------- --- ------
2 ++ P 2024 T351 1IN PLATE, ALUMINIUM ALLOY, 2024, T351, 1 X 48 X 144IN, AMS-QQ-A-250/4A LB ++
3 ++ P 2024 T351 1IN USQ PLATE, ALUMINIUM ALLOY, 2024, T351, 1 X 48 X 144IN, AMS-QQ-A-250/4A +
ULTRASON LB ++
4 ++ P 2024 T351 1.1/2IN PLATE, ALUMINIUM ALLOY, 2024, T351, 1.1/2 X 48 X 144IN, AMS-QQ-A-250/4A LB ++
5 ++ P 2024 T351 1.1/2IN USQ PLATE, ALUMINIUM ALLOY, 2024, T351, 1.1/2 X 48 X 144IN, AMS-QQ-A-250/4A +
ULTRASON LB ++
6 ++ P 2024 T351 1.1/4IN PLATE, ALUMINIUM ALLOY, 2024, T351, 1.1/4 X 48 X 144IN, AMS-QQ-A-250/4A LB ++
7 ++ P 2024 T351 1.3/4IN USQ PLATE, ALUMINIUM ALLOY, 2024, T351, 1.3/4 X 48 X 144IN, AMS-QQ-A-250/4A +
ULTRASON LB ++
8 ++ P 2024 T351 1/2IN PLATE, ALUMINIUM ALLOY, 2024, T351, 1/2 X 48 X 144IN, AMS-QQ-A-250/4A LB ++
9 ++ P 2024 T351 1/4IN PLATE, ALUMINIUM ALLOY, 2024, T351, 1/4 X 48 X 144IN, AMS-QQ-A-250/4A LB ++
10 ++ P 2024 T351 2IN PLATE, ALUMINIUM ALLOY, 2024, T351, 2 X 48 X 144IN, AMS-QQ-A-250/4A LB ++
11 ++ P 2024 T351 2.1/2IN PLATE, ALUMINIUM ALLOY, 2024, T351, 2.1/2 X 48 X 144IN, AMS-QQ-A-250/4A +
ULTRASON LB ++
12 ++ P 2024 T351 2.3/4IN USQ PLATE, ALUMINIUM ALLOY, 2024, T351, 2.3/4 X 48 X 144IN, AMS-QQ-A-250/4A +
ULTRASON LB ++
13 ++ P 2024 T351 3IN PLATE, ALUMINIUM ALLOY, 2024, T351, 3 X 48 X 144IN, AMS-QQ-A-250/4A LB ++
14 ++ P 2024 T351 3IN USQ PLATE, ALUMINIUM ALLOY, 2024, T351, 3 X 48 X 144IN, AMS-QQ-A-250/4A +
ULTRASON LB ++
15 ++ P 2024 T351 3.1/2IN PLATE, ALUMINIUM ALLOY, 2024, T351, 3.1/2 X 48 X 144IN, AMS-QQ-A-250/4A LB ++
16 ++ P 2024 T351 3/4IN USQ PLATE, ALUMINIUM ALLOY, 2024, T351, 3/4 X 48 X 144IN, AMS-QQ-A-250/4A +
ULTRASON LB ++
17 ++ P 2024 T351 3/8IN PLATE, ALUMINIUM ALLOY, 2024, T351, 3/8 X 48 X 144IN, AMS-QQ-A-250/4A LB ++
18 ++ P 2024 T351 3/8IN Z1 PLATE, ALUMINIUM ALLOY, 2024, T351, 3/8 X 96.5 X 100IN, AMS-QQ-A-250/4A LB ++
19 ++ P 2024 T351 4IN PLATE, ALUMINIUM ALLOY, 2024, T351, 4 X 48 X 144IN, AMS-QQ-A-250/4A LB ++
20 ++ P 2024 T351 4IN USQ PLATE, ALUMINIUM ALLOY, 2024, T351, 4 X 48 X 144IN, AMS-QQ-A-250/4A +
ULTRASON LB ++
21 ++ P 2024 T351 4-1/2IN PLATE, ALUMINIUM ALLOY, 2024, T351, 4.1/2 X 48 X 144IN, AMS-QQ-A-250/4A LB ++
22 ++ P 2024 T351 5/16IN PLATE, ALUMINIUM ALLOY, 2024, T351, 5/16 X 48 X 144IN, AMS-QQ-A-250/4A LB ++
23 ++ P 2024 T351 5/8IN PLATE, ALUMINIUM ALLOY, 2024, T351, 5/8 X 48X 144IN, AMS-QQ-A-250/4A LB ++
24 ++ P 2024 T351 7/8IN PLATE, ALUMINIUM ALLOY, 2024, T351, 7/8 X 48 X 144IN, AMS-QQ-A-250/4A LB ++
29 ++ P 2124 T851 1.1/2USQ M PLATE, ALUMINIUM ALLOY, 2124, T851, 1.1/2 X 48 X 144IN, FMS 3002+ULTRASON LB ++
30 ++ P 2124 T851 1.3/4 USQ M PLATE, ALUMINIUM ALLOY, 2124, T851, 1.3/4 X 48 X 144IN, FMS 3002+ULTRASON LB ++
31 ++ P 2124 T851 2.1/2 USQ M PLATE, ALUMINIUM ALLOY, 2124, T851, 2.1/2 X 48 X 144IN, FMS 3002+ULTRASON LB ++
32 ++ P 2124 T851 2.1/2IN MUSQ PLATE, ALUMINIUM ALLOY, 2124, T851, 2.1/2 X 48 X 144IN, MMS 149, LB ++
33 ++ P 2124 T851 2.1/4IN USQ PLATE, ALUMINIUM ALLOY, 2124, T851, 2.1/4 X 48 X 144IN, AMS-QQ-A-250/29
ULTRASON LB ++
34 ++ P 2124 T851 2.3/4 USQ M PLATE, ALUMINIUM ALLOY, 2124, T851, 2.3/4 X 48 X 144IN, FMS 3002+ULTRASON LB ++
35 ++ P 2124 T851 3IN USQ Z4 PLATE, ALUMINIUM ALLOY, 2124, T851, 3 X 36 X 120IN, FMS 3002+ULTRASON LB ++
36 ++ P 2124 T851 3IN USQ Z6 PLATE, ALUMINIUM ALLOY, 2124, T851, 3 X 44 X 96IN, FMS 3002+ULTRASON LB ++
37 ++ P 2124 T851 4IN USQ M PLATE, ALUMINIUM ALLOY, 2124, T851, 4 X 48 X 144IN, FMS 3002+ULTRASON LB ++
38 ++ P 2124 T851 5.1/2IN M1 PLATE, ALUMINIUM ALLOY, 2124, T851, 5.1/2 X 48 X 144IN, FMS 3002+USQ LB ++
39 ++ P 2219 T351 0.375IN PLATE, ALUMINIUM ALLOY, 2219, T351, .375 X 48 X 144IN, AMS-QQ-A-250/30 LB ++
40 ++ P 2219 T351 1IN PLATE, ALUMINIUM ALLOY, 2219, T351, 1 X 48 X 144IN, AMS-QQ-A-250/30 LB ++
41 ++ P 2219 T351 1/2IN PLATE, ALUMINIUM ALLOY, 2219, T351, 1/2 X 48 X 144IN, AMS-QQ-A-250/30 LB ++
42 ++ P 2219 T351 5/8IN Z PLATE, ALUMINIUM ALLOY, 2219, T351, 5/8 X 59 X 00XX, XXX-XX-X-000/00 LB ++
44 ++ P 5083 H321 1/4IN PLATE, ALUMINIUM ALLOY, 5083, H321, 1/4 X 48 X 144IN, AMS-QQ-A-250/6 LB ++
47 ++ P 5083 H321 16MM M PLATE, ALUMINIUM ALLOY, 5083, H321, 16MM X 48IN X 144IN, AMS-QQ-A-250/6 LB ++
48 ++ P 5083 H321 2IN PLATE, ALUMINIUM ALLOY, 5083, H321, 2 X 48 X 144IN, AMS-QQ-A-250/6 LB ++
50 ++ P 5083 H321 22MM PLATE, ALUMINIUM ALLOY, 5083, H321, 22MM X 48IN X 144IN, AMS-QQ-A-250/6 LB ++
51 ++ P 5083 H321 25MM M PLATE, ALUMINIUM ALLOY, 5083, H321, 25MM X 48IN X 144IN, AMS-QQ-A-250/6 LB ++
52 ++ P 5083 H321 40MM PLATE, ALUMINIUM ALLOY, 5083, H321, 40MM X 48IN X 144IN, AMS-QQ-A-250/6 LB ++
53 ++ P 5083 H321 5/8IN PLATE, ALUMINIUM ALLOY, 5083, H321, 5/8 X 48 X 144IN, AMS-QQ-A-250/6 LB ++
59 ++ P 5086 H116 1/4IN PLATE, ALUMINIUM ALLOY, 5086, H116, 1/4 X 48 X 144IN, ASTM B-209 LB ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 1 of 6
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD. EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE
IAI CAT. PRICE
# No. P/N DESCRIPTION UOM [$/LB]
--- --------- --------------------------- -------------------------------------------------------------------------- --- ------
60 ++ P 5086 H116 3/8IN PLATE, ALUMINIUM ALLOY, 5086, H116, 3/8 X 48 X 144IN, ASTM B-209 LB ++
62 ++ P 6061 T61IN PLATE, ALUMINIUM ALLOY, 6061, T6, 1 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
63 ++ P 6061 T61.1/2IN PLATE, ALUMINIUM ALLOY, 6061, T6, 1.1/2 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
64 ++ P 6061 T61/2IN PLATE, ALUMINIUM XXXXX, 0000, X0, 0/0X 48 X 144IN, AMS-QQ-A-250/11 LB ++
65 ++ P 6061 T6 10MM PLATE, ALUMINIUM ALLOY, 6061, T6, 10 X 1000 X 2000 MM, AMS-QQ-A-250/11 LB ++
66 ++ P 6061 T6 10IN M PLATE, ALUMINIUM ALLOY, 6061, T6, 10 X 48 X 144IN, COMMERCIAL LB ++
67 ++ P 6061 T6 2.1/2IN PLATE, ALUMINIUM ALLOY, 6061, T6, 2.1/2 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
68 ++ P 6061 T6 3/8IN PLATE, ALUMINIUM ALLOY, 6061, T6, 3/8 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
69 ++ P 6061 T6 7/8IN PLATE, ALUMINIUM ALLOY, 6061, T6, 7/8 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
73 ++ P 6061 T651 1IN PLATE, ALUMINIUM ALLOY, 6061, T651, 1 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
74 ++ P 6061 T651 1.1/2IN PLATE, ALUMINIUM ALLOY, 6061, T651, 1.1/2 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
75 ++ P 6061 T651 1.1/4IN PLATE, ALUMINIUM ALLOY, 6061, T651, 1.1/4 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
76 ++ P 6061 T651 1.1/8IN PLATE, ALUMINIUM ALLOY, 6061, T651, 1.1/8 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
77 ++ P 6061 T651 1.3/4IN PLATE, ALUMINIUM ALLOY, 6061, T651, 1.3/4 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
78 ++ P 6061 T651 1.3/8IN PLATE, ALUMINIUM ALLOY, 6061, T651, 1.3/8 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
79 ++ P 6061 T651 1-5/8IN PLATE, ALUMINIUM ALLOY, 6061, T651, 1.5/8 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
80 ++ P 6061 T651 1/2IN PLATE, ALUMINIUM ALLOY, 6061, T651, 1/2 X 48 X 144IN,AMS-QQ-A-250/11 LB ++
81 ++ P 6061 T651 1/4IN PLATE, ALUMINIUM ALLOY, 6061, T651, 1/4 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
82 ++ P 6061 T651 10MMZ1 PLATE, ALUMINIUM ALLOY, 6061, T651, 10 X 1250 X 2500MM AMS-QQ-A-250/11 LB ++
83 ++ P 6061 T651 10MMZ PLATE, ALUMINIUM ALLOY, 6061, T651, 10 X 1500 X 3000MM, AMS-QQ-A-250/11 LB ++
84 ++ P 6061 T651 12MM PLATE, ALUMINIUM ALLOY, 6061, T651, 12 X 1200 X 3650MM, AMS-QQ-A-250/11 LB ++
85 ++ P 6061 T651 15MMZ PLATE, ALUMINIUM ALLOY, 6061, T651, 15 X 1220 X 3660MM, AMS-QQ-A-250/11 LB ++
86 ++ P 6061 T651 2IN PLATE, ALUMINIUM ALLOY, 6061, T651, 2 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
87 ++ P 6061 T651 2.1/2IN PLATE, ALUMINIUM ALLOY, 6061, T651, 2.1/2 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
88 ++ P 6061 T651 2.1/4IN PLATE, ALUMINIUM ALLOY, 6061, T651, 2.1/4 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
89 ++ P 6061 T651 2-3/4IN PLATE, ALUMINIUM ALLOY, 6061, T651, 2.3/4 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
90 ++ P 6061 T651 20MM PLATE, ALUMINIUM ALLOY, 6061, T651, 20 X 1000 X 2000MM, AMS-QQ-A-250/11 LB ++
91 ++ P 6061 T651 2IN Z PLATE, ALUMINIUM ALLOY, 6061, T651, 2IN X 1000MM X 1500MM, AMS-QQ-A-250/11 LB ++
92 ++ P 6061 T651 3IN PLATE, ALUMINIUM ALLOY, 6061, T651, 3.000 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
93 ++ P 6061 T651 3.1/2IN PLATE, ALUMINIUM ALLOY, 6061, T651, 3.1/2 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
94 ++ P 6061 T651 3.1/4IN PLATE, ALUMINIUM ALLOY, 6061, T651, 3.1/4 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
95 ++ P 6061 T651 3.3/4IN PLATE, ALUMINIUM ALLOY, 6061, T651, 3.3/4 X 48 X144IN, AMS-QQ-A-250/11 LB ++
96 ++ P 6061 T651 3/16IN PLATE, ALUMINIUM ALLOY, 6061, T651, 3/16 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
97 ++ P 6061 T651 3/4IN PLATE, ALUMINIUM ALLOY, 6061, T651, 3/4 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
98 ++ P 6061 T651 3/8IN PLATE, ALUMINIUM ALLOY, 6061, T651, 3/8 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
99 ++ P 6061 T651 3IN Z PLATE, ALUMINIUM ALLOY, 6061, T651, 3IN X 2000MM X 1200MM, AMS-QQ-A-250/11 LB ++
100 ++ P 6061 T651 4IN PLATE, ALUMINIUM ALLOY, 6061, T651, 4.000 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
101 ++ P 6061 T651 4.1/2IN PLATE, ALUMINIUM ALLOY, 6061, T651, 4.1/2X 48 X 144IN, AMS-QQ-A-250/11 LB ++
102 ++ P 6061 T651 5IN PLATE, ALUMINIUM ALLOY, 6061, T651, 5.000 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
103 ++ P 6061 T651 5/161N PLATE, ALUMINIUM ALLOY, 6061, T651, 5/16 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
104 ++ P 6061 T651 5/8IN PLATE, ALUMINIUM ALLOY, 6061, T651, 5/8 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
105 ++ P 6061 T651 6IN PLATE, ALUMINIUM ALLOY, 6061, T651, 6.000 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
106 ++ P 6061 T651 7IN PLATE, ALUMINIUM ALLOY, 6061, T651, 7 X 48 X 144IN, QQ-A-250/11F FOR COMP.
ONLY LB ++
107 ++ P 6061 T651 7.3/4IN PLATE, ALUMINIUM ALLOY, 6061, T651, 7.3/4 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
108 ++ P 6061 T651 7/8IN PLATE, ALUMINIUM ALLOY, 6061, T651, 7/8 X 48 X 144IN, AMS-QQ-A-250/11 LB ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 2 of 6
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD. EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE
IAI CAT. PRICE
# No. P/N DESCRIPTION UOM [$/LB]
--- --------- --------------------------- -------------------------------------------------------------------------- --- ------
109 ++ P 6061 T651 8MM PLATE, ALUMINIUM ALLOY, 6061, T651, 8X1000X2000MM, AMS-QQ-A-250/11 LB ++
110 ++ P 7050 T7451 1IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 1 X 48 X 144IN, AMS 4050G + ULTRASON LB ++
111 ++ P 7050 T7451 1.1/2IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 1.1/2 X 48 X 144IN, AMS 4050G +
ULTRASON LB ++
112 ++ P 7050 T7451 1.1/2IN M PLATE, ALUMINIUM ALLOY, 7050, T7451, 1.1/2 X 48 X 144IN, MMS 1420 LB ++
113 ++ P 7050 T7451 1.1/4IN M PLATE, ALUMINIUM ALLOY, 7050, T7451, 1.1/4 X 36 X 96IN, MMS 1420 LB ++
114 ++ P 7050 T7451 1.1/4IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 1.1/4 X 48 X 144IN, AMS 4050G+
ULTRASON LB ++
115 ++ P 7050 T7451 1.3/4IN PLATE, ALUMINIUM ALLOY, 7050, T7451, 1.3/4 X 48 X 1441N, AMS 4O5OF LB ++
116 ++ P 7050 T7451 1.3/4IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 1.3/4 X 48 X 144IN, AMS 4050G+
ULTRASON LB ++
117 ++ P 7050 T7451 1.5/8 USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 1.5/8 X 48 X 144IN, AMS 4050G+
ULTRASON LB ++
118 ++ P 7050 T7451 1/2IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 1/2 X 48 X 144IN, AMS 4050G+
ULTRASON LB ++
119 ++ P 7050 T7451 1/4IN PLATE, ALUMINIUM ALLOY, 7050, T7451, 1/4 X 48 X 144IN, AMS 4050G+
ULTRASON LB ++
120 ++ P 7050 T7451 100MM PLATE, ALUMINIUM ALLOY, 7050, T7451, 100 X 1000 X 2000MM, AMS 4050F LB ++
121 ++ P 7050 T7451 2IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 2 X 48 X 144IN, AMS 4050G + ULTRASON LB ++
122 ++ P 7050 T7451 2IN M PLATE, ALUMINIUM ALLOY, 7050, T7451, 2 X 48 X 144IN, MMS 1420 LB ++
123 ++ P 7050 T7451 2.1/2IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 2.1/2 X 48 X 144IN, AMS 4050G +
ULTRASON LB ++
124 ++ P 7050 T7451 2.1/2IN M PLATE, ALUMINIUM ALLOY, 7050, T7451, 2.1/2 X 48 X 144IN, MMS 1420 LB ++
125 ++ P 7050 T7451 2.1/2IN USZ PLATE, ALUMINIUM ALLOY, 7050, T7451, 2.1/2 X 48 X 215IN, AMS 4050G +
ULTRASON, CLASS A LB ++
126 ++ P 7050 T7451 2.1/4IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 2.1/4 X 48 X 144IN, AMS 4050G +
ULTRASON LB ++
127 ++ P 7050 T7451 2.1/4IN M PLATE, ALUMINIUM ALLOY, 7050, T7451, 2.1/4 X 48 X 144IN, MMS 1420 LB ++
128 ++ P 7050 T7451 2.3/4IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 2.3/4 X 48 X 144IN, AMS 4050G +
ULTRASON LB ++
129 ++ P 7050 T7451 2.3/4IN M PLATE, ALUMINIUM ALLOY, 7050, T7451, 2.3/4 X 48 X144IN, MMS 1420 LB ++
130 ++ P 7050 T7451 3IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 3 X 48 X 144IN, AMS 4050G + ULTRASON LB ++
131 ++ P 7050 T7451 3IN M PLATE, ALUMINIUM ALLOY, 7050, T7451, 3 X 48 X 144IN, MMS 1420 LB ++
132 ++ P 7050 T7451 3.1/2IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 3.1/2 X 48 X 144IN, AMS 4050G +
ULTRASON LB ++
133 ++ P 7050 T7451 3.1/2IN M PLATE, ALUMINIUM ALLOY, 7050, T7451, 3.1/2 X 48 X 144IN, MMS 1420 LB ++
134 ++ P 7050 T7451 3.1/2IN MZ PLATE, ALUMINIUM ALLOY, 7050, T7451, 3.1/2 X 48 X 68IN, MMS 1420 LB ++
135 ++ P 7050 T7451 3.1/4IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 3.1/4 X 48 X 144IN, AMS 4050G +
ULTRASON LB ++
136 ++ P 7050 T7451 3.3/4IN USQ Z1 PLATE, ALUMINIUM ALLOY, 7050, T7451, 3.75 X 48 X 144IN, AMS 4050G +
ULTRASON LB ++
137 ++ P 7050 T7451 3.3/4IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 3.75 X 67.75 X 154.25IN, AMS 4050G +
ULTRASON LB ++
138 ++ P 7050 T7451 4IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 4 X 48 X 144IN, AMS 4050G + ULTRASON LB ++
139 ++ P 7050 T7451 4IN M PLATE, ALUMINIUM ALLOY, 7050, T7451, 4 X 48 X 144IN, MMS 1420 LB ++
140 ++ P 7050 T7451 4.1/2IN USS PLATE, ALUMINIUM ALLOY, 7050, T7451, 4.1/2 X 36 X 96IN, MMS 1420 + USQ A1
PER PS.21211 LB ++
141 ++ P 7050 T7451 4.1/2IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 4.1/2 X 48 X 144IN, AMS
4050G + ULTRASON LB ++
142 ++ P 7050 T7451 4.1/41N USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 4.1/4 X 48 X 144IN, AMS
4050G + ULTRASON LB ++
143 ++ P 7050 T7451 4.3/4 USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 4.3/4 X 48 X 144IN, AMS
4050G + ULTRASON LB ++
144 ++ P 7050 T7451 4.3/4 USQ Z1 PLATE, ALUMINIUM ALLOY, 7050, T7451, 4.3/4 X 62 X 125IN, AMS
4050G + ULTRASON LB ++
145 ++ P 7050 T7451 4.3/4 USQ Z2 PLATE, ALUMINIUM ALLOY, 7050, T7451, 4.3/4 X 62 X 265IN, AMS
4050G + ULTRASON LB ++
146 ++ P 7050 T7451 5IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 5 X 48 X 144IN, AMS
4050G + ULTRASON LB ++
147 ++ P 7050 T7451 5.1/2IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 5.1/2 X 48 X 144IN, AMS
4050G + ULTRASON LB ++
148 ++ P 7050 T7451 5.1/4IN US PLATE, ALUMINIUM ALLOY, 7050, T7451, 5.1/4 X 48 X 144IN, AMS
4050G + ULTRASON LB ++
149 ++ P 7050 T7451 5.1/4IN USS PLATE, ALUMINIUM ALLOY, 7050, T7451, 5.1/4IN, MMS 1420 + USQ A1 PER
PS.21211 LB ++
150 ++ P 7050 T7451 5IN USS PLATE, ALUMINIUM ALLOY, 7050, T7451, 5IN, MMS 1420 + USQ A1 PER PS.21211 LB ++
151 ++ P 7050 T7451 6IN USQ PLATE, ALUMINIUM ALLOY, 7050, T7451, 6 X 48 X 144IN, AMS 4050G + ULTRASON LB ++
152 ++ P 7050 T7451 6IN USS PLATE, ALUMINIUM ALLOY, 7050, T7451, 6 X 48 X 144IN, MMS 1420+USQ A1
PER PS.21211 LB ++
157 ++ P 7050 T7451 85MM Z PLATE, ALUMINIUM ALLOY, 7050, T7451, 85 X 1200 X 3600MM, AMS 4050F LB ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 3 of 6
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD. EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE
IAI CAT. PRICE
# No. P/N DESCRIPTION UOM [$/LB]
--- --------- --------------------------- -------------------------------------------------------------------------- --- ------
158 ++ P 7050 T7451 3IN M3 PLATE, ALUMINIUM ALLOY, 7050, T7451, FATIGUE XXXXXXXX, 0 X 32.5 X 490IN,
BMS 7-323C TYPE 1 LB ++
159 ++ P 7050 T7451 3IN M4 PLATE, ALUMINIUM ALLOY, 7050, T7451, FATIGUE XXXXXXXX, 0 X 37.5 X 431IN,
BMS 7-323C TYPE I LB ++
160 ++ P 7075 T651 1IN PLATE, ALUMINIUM ALLOY, 7075, T651, 1 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
161 ++ P 7075 T651 1.1/2IN PLATE, ALUMINIUM ALLOY, 7075, T651, 1.1/2 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
162 ++ P 7075 T651 1.1/2IN M PLATE, ALUMINIUM ALLOY, 7075, T651, 1.1/2 X 70 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
163 ++ P 7075 T651 1.1/4IN PLATE, ALUMINIUM ALLOY, 7075, T651, 1.1/4 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
164 ++ P 7075 T651 1.1/8IN PLATE, ALUMINIUM ALLOY, 7075, T651, 1.1/8 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
165 ++ P 7075 T651 1.3/41N PLATE, ALUMINIUM ALLOY, 7075, T651, 1.3/4 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
166 ++ P 7075 T651 1/2IN M PLATE, ALUMINIUM ALLOY, 7075, T651, 1/2 X 48 X 144IN, AMS-QQ-A-250/12 LB ++
167 ++ P 7075 T651 1/2IN USQ PLATE, ALUMINIUM ALLOY, 7075, T651, 1/2 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
168 ++ P 7075 T651 1/4IN PLATE, ALUMINIUM ALLOY, 7075, T651, 1/4 X 48 X 144IN, AMS-QQ-A-250/12 LB ++
169 ++ P 7075 T651 1/4IN M PLATE, ALUMINIUM ALLOY, 7075, T651, 1/4 X 48 X 144IN, AMS-QQ-A-250/12 LB ++
170 ++ P 7075 T651 2IN PLATE, ALUMINIUM ALLOY, 7075, T651, 2 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
171 ++ P 7075 T651 2.3/4IN PLATE, ALUMINIUM ALLOY, 7075, T651, 2.3/4 X 48 X 144IN, AMS-QQ-A-250/12 LB ++
172 ++ P 7075 T651 20MM USQ PLATE, ALUMINIUM ALLOY, 7075, T651, 20MM X 48IN X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
173 ++ P 7075 T651 3/4IN USQ PLATE, ALUMINIUM ALLOY, 7075, T651, 3/4 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
174 ++ P 7075 T651 3/4IN PLATE, ALUMINIUM ALLOY, 7075, T651, 3/4 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
175 ++ P 7075 T651 3/8IN PLATE, ALUMINIUM ALLOY, 7075, T651, 3/8 X 48 X 144IN, AMS-QQ-A-250/12 LB ++
176 ++ P 7075 T651 5/16IN PLATE, ALUMINIUM ALLOY, 7075, T651, 5/16 X 48 X 144IN, AMS-QQ-A-250/12 LB ++
177 ++ P 7075 T651 5/8IN M PLATE, ALUMINIUM ALLOY, 7075, T651, 5/8 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
178 ++ P 7075 T651 7/8IN USQ PLATE, ALUMINIUM ALLOY, 7075, T651, 7/8 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
179 ++ P 7075 T7351 1IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 1 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
180 ++ P 7075 T7351 1IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 1 X 48 X 144IN, MMS 159 LB ++
181 ++ P 7075 T7351 1.1/2 USQ A1 PLATE, ALUMINIUM ALLOY, 7075, T7351, 1.1/2 X 27 X 123IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
182 ++ P 7075 T7351 1.1/2IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 1.1/2 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
183 ++ P 7075 T7351 1.1/2IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 1.1/2 X 48 X 144IN, MMS 159 LB ++
184 ++ P 7075 T7351 1.1/4IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 1.1/4 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
185 ++ P 7075 T7351 1.1/4IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 1.1/4 X 48 X 144IN, MMS 159 LB ++
186 ++ P 7075 T7351 1.1/8IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 1.1/8 X 48 X 144IN, MMS 159 LB ++
187 ++ P 7075 T7351 1.3/4IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 1.3/4 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
188 ++ P 7075 T7351 1.3/4 USQ M PLATE, ALUMINIUM ALLOY, 7075, T7351, 1.3/4 X 48 X 144IN, AMS-QQ-A-250/12 +
USQ PER DPS 4.713 LB ++
189 ++ P 7075 T7351 1.3/4IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 1 3/4 X 48 X 144IN, MMS 159 LB ++
190 ++ P 7075 T7351 1.3/4 USQ M1 PLATE, ALUMINIUM ALLOY, 7075, T7351, 1.3/4 X 48 X 144IN, MMS 159+USQ PER
DPS 21211 CLASS A LB ++
191 ++ P 7075 T7351 1.3/8IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 1.3/8 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
192 ++ P 7075 T7351 1.3/8IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 1.3/8 X 48 X 144IN, MMS 159 LB ++
193 ++ P 7075 T7351 1.5/8IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 1.5/8 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
194 ++ P 7075 T7351 1.5/8IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 1.5/8 X 48 X 144IN, MMS 159 LB ++
195 ++ P 7075 T7351 1/2IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 1/2 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
196 ++ P 7075 T7351 1/2IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 1/2 X 48 X 144IN, MMS 159 LB ++
197 ++ P 7075 T7351 1/4IN PLATE, ALUMINIUM ALLOY, 7075, T7351, 1/4 X 48 X 144IN, AMS-QQ-A-250/12 LB ++
198 ++ P 7075 T7351 1/4IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 1/4 X 48 X 144IN, MMS 159 LB ++
199 ++ P 7075 T7351 100MM PLATE, ALUMINIUM ALLOY, 7075, T7351, 100 X 1250 X 2500MM, AMS-QQ-A-250/12
200 ++ P 7075 T7351 2IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 2 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
201 ++ P 7075 T7351 2IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 2 X 48 X 144IN, MMS 159 LB ++
202 ++ P 7075 T7351 2-1/2IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 2.1/2 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 4 of 6
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD. EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE
IAI CAT. PRICE
# No. P/N DESCRIPTION UOM [$/LB]
--- --------- --------------------------- -------------------------------------------------------------------------- --- ------
203 ++ P 7075 T7351 2.1/2IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 2.1/2 X 48 X 144IN, MMS 159 LB ++
204 ++ P 7075 T7351 2.1/2 USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 2.1/2 X 60 X 125IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
205 ++ P 7075 T7351 2.1/4IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 2.1/4 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
206 ++ P 7075 T7351 2.1/4 USQ A PLATE, ALUMINIUM ALLOY, 7075, T7351, 2.1/4 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
207 ++ P 7075 T7351 2.1/4IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 2.1/4 X 48 X 144IN, MMS 159 LB ++
208 ++ P 7075 T7351 2.3/4IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 2.3/4 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
209 ++ P 7075 T7351 2.3/4IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 2.3/4 X 48 X 144IN, MMS 159 LB ++
210 ++ P 7075 T7351 2.3/4 USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 2.3/4IN X 1330MM X 1400MM,
AMS-QQ-A-250/12 + ULTRASON LB ++
211 ++ P 7075 T7351 3IN USQ Z2 PLATE, ALUMINIUM ALLOY, 7075, T7351, 3 X 32 X 102IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
212 ++ P 7075 T7351 3IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 3 X 36 X 96IN, MMS 159 LB ++
213 ++ P 7075 T7351 3IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 3 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
214 ++ P 7075 T7351 3IN MZ PLATE, ALUMINIUM ALLOY, 7075, T7351, 3 X 55 X 117IN, MMS 159 LB ++
215 ++ P 7075 T7351 3IN M1 PLATE, ALUMINIUM ALLOY, 7075, T7351, 3 X 55 X 149IN, MMS 159 LB ++
216 ++ P 7075 T7351 3.1/2IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 3.1/2 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
217 ++ P 7075 T7351 3.1/2 USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 3.1/2 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON, USQ CL. A PER MIL-STD-2154 A LB ++
218 ++ P 7075 T7351 3.1/2IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 3.1/2 X 48 X 144IN, MMS 159 LB ++
219 ++ P 7075 T7351 3-1/4IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 3.1/4 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
220 ++ P 7075 T7351 3.1/4IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 3.1/4 X 48 X 144IN, MMS 159 LB ++
221 ++ P 7075 T7351 3-3/4IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 3.3/4 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
222 ++ P 7075 T7351 3/4IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 3/4 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
223 ++ P 7075 T7351 3/4IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 3/4 X 48 X 144IN, MMS 159 LB ++
224 ++ P 7075 T7351 3/8IN PLATE, ALUM1NIUM ALLOY, 7075, T7351, 3/8 X 48 X 144IN, AMS-QQ-A-250/12 LB ++
225 ++ P 7075 T7351 3/8IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 3/8 X 48 X 144IN, MMS 159 LB ++
226 ++ P 7075 T7351 30MM USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 30MM X 48IN X 144IN, AMS-QQ-A-250/12
+ ULTRASON LB ++
227 ++ P 7075 T7351 33MM USQ Z PLATE, ALUMINIUM ALLOY, 7075, T7351, 33MM X 67.75IN X 94.25IN,
AMS-QQ-A-250/12 + ULTRASON,CL.A LB ++
228 ++ P 7075 T7351 35MM M PLATE, ALUMINIUM ALLOY, 7075, T7351, 35MM X 48IN X 144IN,MMS 159 LB ++
229 ++ P 7075 T7351 4IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 4 X 48 X 144IN,AMS-QQ-A-250/12 +
ULTRASON LB ++
230 ++ P 7075 T7351 4IN PLATE, ALUMINIUM ALLOY, 7075, T7351, 4 X 48 X 144IN, MMS 159 LB ++
231 ++ P 7075 T7351 4 1/2IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 4.1/2 X 48 X 144IN,AMS-QQ-A-250/12 +
ULTRASON LB ++
232 ++ P 7075 T7351 40MM USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 40MM X 48IN X 144IN, AMS-QQ-A-250/12
+ ULTRASON LB ++
233 ++ P 7075 T7351 5IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 5 X 48 X 144IN,AMS-QQ-A-250/12
(FOR COMP.ONLY) LB ++
234 ++ P 7075 T7351 5/16IN PLATE, ALUMINIUM ALLOY, 7075, T7351, 5/16 X 48 X 144IN, AMS-QQ-A-250/12 LB ++
235 ++ P 7075 T7351 5/16IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 5/16 X 48 X 144IN, MMS 159 LB ++
236 ++ P 7075 T7351 5/8IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 5/8 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
237 ++ P 7075 T7351 5/8IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 5/8 X 48 X 144IN, MMS 159 LB ++
238 ++ P 7075 T7351 7/8IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7351, 7/8 X 48 X 144IN, AMS-QQ-A-250/12 +
ULTRASON LB ++
239 ++ P 7075 T7351 7/8IN M PLATE, ALUMINIUM ALLOY, 7075, T7351, 7/8 X 48 X 144IN, MMS 159 LB ++
240 ++ P 7075 T7651 1.1/4IN PLATE, ALUMINIUM ALLOY, 7075, T7651, 1.1/4 X 48 X 144IN, AMS-QQ-A-250/24A LB ++
241 ++ P 7075 T7651 1/4IN PLATE, ALUMINIUM ALLOY, 7075, T7651, 1/4 X 48 X 144IN, AMS-QQ-A-250/24A LB ++
242 ++ P 7075 T7651 2IN USQ PLATE, ALUMINIUM ALLOY, 7075, T7651, 2 X 48 X 144IN, AMS-QQ-A-250/24A +
ULTRASON LB ++
243 ++ P 7150 T7751 1.1/2IN Z5 PLATE, ALUMINIUM ALLOY, 7150, T7751, 1.1/2 X 85 X 253IN, AMS 4252A +
ULTRASON LB ++
244 ++ P 7150 T7751 1.1/4IN USQ PLATE, ALUMINIUM ALLOY, 7150, T7751, 1.1/4 X 48 X 144IN, AMS 4252A +
ULTRASON LB ++
245 ++ P 7150 T7751 1.3/4IN Z1 PLATE, ALUMINIUM ALLOY, 7150, T7751, 1.3/4 X 70 X 77IN, AMS 4252A +
ULTRASON LB ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 5 of 6
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD. EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE
IAI CAT. PRICE
# No. P/N DESCRIPTION UOM [$/LB]
--- --------- --------------------------- -------------------------------------------------------------------------- --- ------
246 ++ P 7150 T7751 2IN PLATE, ALUMINIUM ALLOY, 7150, T7751, 2 X 48 X 144IN, AMS 4252A + ULTRASON LB ++
247 ++ P 7150 T7751 2.1/4 PLATE, ALUMINIUM ALLOY, 7150, T7751, 2.1/4 X 48 X 144IN, AMS 4252A +
ULTRASON LB ++
251 ++ P 7475 T7351 1.1/2IN Z PLATE, ALUMINIUM ALLOY, 7475, T7351, 1.1/2 X 70 X 74IN, AMS 4202C +
ULTRASON LB ++
252 ++ P 7475 T7351 1.1/2IN Z1 PLATE, ALUMINIUM ALLOY, 7475, T7351, 1.1/2 X 86 X 252IN, AMS 4202C +
ULTRASON LB ++
253 ++ P 7475 T7351 1.3/4USQ M1 PLATE, ALUMINIUM ALLOY, 7475, T7351, 1.3/4 X 48 X 144IN, FMS 3004 +
ULTRASON LB ++
254 ++ P 7475 T7351 2.1/2IN PLATE, ALUMINIUM ALLOY, 7475, T7351, 2.1/2 X 48 X 144IN, AMS 4202C LB ++
255 ++ P 7475 T7351 2.1/2USQ M1 PLATE, ALUMINIUM ALLOY, 7475, T7351, 2.1/2 X 48 X 144IN, FMS 3004 +
ULTRASON LB ++
256 ++ P 7475 T7351 2.3/4USQ M1 PLATE, ALUMINIUM ALLOY, 7475, T7351, 2.3/4 X 48 X 144IN, FMS 3004 +
ULTRASON LB ++
257 ++ P 7475 T7351 3IN USQ M1 PLATE, ALUMINIUM ALLOY, 7475, T7351, 3 X 48 X 144IN, FMS 3004 + ULTRASON LB ++
258 ++ P 7475 T7351 3.1/4IN PLATE, ALUMINIUM ALLOY, 7475, T7351, 3.1/4 X 48 X 144IN, AMS 4202C LB ++
259 ++ P 7475 T7351 4.1/4USQ M1 PLATE, ALUMINIUM ALLOY, 7475, T7351, 4.1/4 X 48 X 155IN, FMS 3004 +
ULTRASON LB ++
260 ++ P 7475 T7351 48MMUSQ M1 PLATE, ALUMINIUM ALLOY, 7475, T7351, 48 X 850 X 3800MM, FMS 3004 +
ULTRASON LB ++
261 ++ P 7475 T7351 62 MM M1 PLATE, ALUMINIUM ALLOY, 7475, T7351, 62MM X 48IN X 144IN, FMS 3004 +
ULTRASON LB ++
262 ++ P 7475 T7351 75 MM M1 PLATE, ALUMINIUM ALLOY, 7475, T7351, 75MM X 48IN X 144IN, FMS 3004 +
ULTRASON LB ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 6 of 6
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD. EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE BASE BASE
IAI CAT. PRICE PRICE PRICE
2005 2006 2007
# No. P/N DESCRIPTION UOM [$/LB] [$/LB] [$/LB]
-- --------- --------------------- ---------------------------------------------------------------- --- ------ ------ ------
4 ++ S 2024 O 0.032IN SHEET, ALUMINIUM ALLOY, 2024, O,.032 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
5 ++ S 2024 O 0.040IN SHEET, ALUMINIUM ALLOY, 2024, O,.040 X 48 X 144IN, AM5-QQ-A-
250/4A LB ++ ++ ++
6 ++ S 2024 O 0 050IN SHEET, ALUMINIUM ALLOY, 2024, O,.050 X 36 X 120IN, XXX-XX-X-000/
0X XX ++ ++ ++
7 ++ S 2024 O 0.063IN SHEET, ALUMINIUM ALLOY, 2024, O,.063 X 48 X 144IN, XXX-XX-X-000/
0X XX ++ ++ ++
8 ++ S 2024 O 0.071IN SHEET, ALUMINIUM ALLOY, 2024, O,.071 X 48 X 144IN, XXX-XX-X-000/
0X XX ++ ++ ++
9 ++ S 2024 O 0.090IN SHEET, ALUMINIUM ALLOY, 2024, O,.090 X 48 X 144IN, XXX-XX-X-000/
0X XX ++ ++ ++
10 ++ S 2024 O 0.160IN SHEET, ALUMINIUM ALLOY, 2024, O,.160 X 48 X 144IN, XXX-XX-X-000/
0X XX ++ ++ ++
11 ++ S 2024 O 0.020IN SHEET, ALUMINIUM ALLOY, 2024, O,.0.020 X 48 X 144IN, AMS-BQ-A-
250/
4A LB ++ ++ ++
12 ++ S 2024 O 0.080IN SHEET, ALUMINIUM ALLOY, 2024, O,.0.080 X 48 X 144IN, AMS-QQ-A-
250/
4A LB ++ ++ ++
13 ++ S 2024 O 0.100IN SHEET, ALUMINIUM ALLOY, 2024, O,.0.100 X 48 X 144IN, AMS-QQ-A-
250/
4A LB ++ ++ ++
14 ++ S 2024 O 0.100IN MZ2 SHEET, ALUMINIUM ALLOY, 2024, O,.0.100 X 65 X 00XX, XXX-XX-X-
250/4E
+ HI- FORM LB ++ ++ ++
15 ++ S 2024 O 0.125IN Z SHEET, ALUMINIUM ALLOY, 2024, O,.0.125 X 60 X 178IN, AMS-QQ-A-
250/4A LB ++ ++ ++
16 ++ S 2024 T3 0.016IN SHEET, ALUMINIUM ALLOY, 2024, T3,.016 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
17 ++ S 2024 T3 0.020IN SHEET, ALUMINIUM ALLOY, 2024, T3,.020 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
18 ++ S 2024 T3 0.025IN SHEET, ALUMINIUM ALLOY, 2024, T3,.025 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
19 ++ S 2024 T3 0.032IN SHEET, ALUMINIUM ALLOY, 2024, T3,.032 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
20 ++ S 2024 T3 0.040IN SHEET, ALUMINIUM ALLOY, 2024, T3,.040 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
21 ++ S 2024 T3 0.050IN SHEET, ALUMINIUM ALLOY, 2024, T3,.050 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
22 ++ S 2024 T3 0.071IN SHEET, ALUMINIUM ALLOY, 2024, T3,.071 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
23 ++ S 2024 T3 0.090IN SHEET, ALUMINIUM ALLOY, 2024, T3,.090 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
24 ++ S 2024 T3 0.1251N SHEET, ALUMINIUM ALLOY, 2024, T3,.125 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
25 ++ S 2024 T3 0.160IN SHEET, ALUMINIUM ALLOY, 2024, T3,,160 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
26 ++ S 2024 T3 0.190IN SHEET, ALUMINIUM ALLOY, 2024, T3,.190 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
27 ++ S 2024 T3 0.16IN Z SHEET, ALUMINIUM ALLOY, 2024, T3,.0.016 X 60 X 144IN, AMS-QQ-A-
250/4A L8 ++ ++ ++
28 ++ S 2024 T3 0.063IN SHEET, ALUMINIUM ALLOY, 2024, T3,.0.063 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
29 ++ S 2024 T3 0.080IN SHEET, ALUMINIUM ALLOY, 2024, T3,.0.080 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
30 ++ S 2024 T3 0.100IN SHEET, ALUMINIUM ALLOY, 2024, T3, 0.100 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
31 ++ S 2024 T30 0.2001N SHEET, ALUMINIUM ALLOY, 2D24, T3, 0.200 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
32 ++ S 2024 T81 0.020IN SHEET, ALUMINIUM ALLOY, 2024, T81,.020 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
33 ++ S 2024 T81 0.040IN SHEET, ALUMINIUM ALLOY, 2024, T81,.040 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
34 ++ S 2024 T81 0.050IN SHEET, ALUMINIUM ALLOY, 2024, T81,.050 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
35 ++ S 2024 T81 0.063IN SHEET, ALUMINIUM ALLOY, 2024, T81,.063 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
36 ++ S 2024 T81 0.071IN SHEET, ALUMINIUM ALLOY, 2024, T81,.071 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
37 ++ S 2024 T81 0.080IN SHEET, ALUMINIUM ALLOY, 2024, T81,.080 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
38 ++ S 2024 T81 0.090IN SHEET, ALUMINIUM ALLOY, 2024, T81,.090 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
39 ++ S 2024 T81 0.100IN SHEET, ALUMINIUM ALLOY, 2024, T81,.100 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
40 ++ S 2024 T81 0.160IN SHEET, ALUMINIUM ALLOY, 2024, T81,.160 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
41 ++ S 2024 T81 0.190IN SHEET, ALUMINIUM ALLOY, 2024, T81,.190 X 48 X 144IN, AMS-QQ-A-
250/4A LB ++ ++ ++
42 ++ S 2219 O 0.080IN MZ 1 SHEET, ALUMINIUM ALLOY, 2219,0,.0.090 X 60 X 120IN, I.A.I.M.S.07.
0057 LB ++ ++ ++
43 ++ S 2219 T31 0.040IN SHEET, ALUMINIUM ALLOY, 2219, T31,.040 X 48 X 144IN, AMS-QQ-A-
250/30 LB ++ ++ ++
44 ++ S 2219 T31 0.160IN SHEET, ALUMINIUM ALLOY, 2219, T31,.160 X 48 X 144IN, AMS-QQ-A-
250/30 LB ++ ++ ++
45 ++ S 2219 T31 0.190IN SHEET, ALUMINIUM ALLOY, 2219, T31,.190 X 48 X 144IN, AMS-QQ-A-
250/30 LB ++ ++ ++
66 ++ S 6013 T4 0.040IN SHEET, ALUMiNIUM ALLOY, 6013, T4, 0.040 X 48 X 144IN, AMS 43478 LB ++ ++ ++
67 ++ S 6013 T4 0.050IN SHEET, ALUMINIUM ALLOY, 6013, T4, 0.050 X 48 X 144IN, AMS 4347B LB ++ ++ ++
68 ++ S 6013 T4 0.063IN SHEET, ALUMINIUM ALLOY, 6013, T4, 0.063 X 48 X 144IN, AMS 4347B LB ++ ++ ++
69 ++ S 6013 T4 0.063IN Z SHEET, ALUMINIUM ALLOY, 6013, T4, 0.063 X 90 X 180IN, AMS 4347B LB ++ ++ ++
70 ++ S 6061 O 0.025IN SHEET, ALUMINIUM ALLOY, 8061, O,.025 X 48 X 144IN, AMS-QQ-A-250/
11 LB ++ ++ ++
71 ++ S 6061 O 0.032IN SHEET, ALUMINIUM ALLOY, 6061, O,.032 X 46 X 144IN, AMS-QQ-A-250/
11 LB ++ ++ ++
72 ++ S 6061 O 0.040IN SHEET, ALUMINIUM ALLOY, 6061, O,.040 X 48 X 144IN, AMS-QQ-A-250/
11 LB ++ ++ ++
73 ++ S 6061 O 0.050IN SHEET, ALUMIN1UM ALLOY, 6061, O,.050 X 48 X 144IN, AMS-QQ-A-250/
11 LB ++ ++ ++
74 ++ S 6061 O 0.063IN SHEET, ALUMINIUM ALLOY, 6061, O,.063 X 48 X 144IN, AMS-QQ-A-250/
11 LB ++ ++ ++
75 ++ S 6061 O 0.071IN SHEET, ALUMINIUM ALLOY, 6061, O,.071 X 48 X 144IN, AMS-QQ-A-250/
11 LB ++ ++ ++
76 ++ S 6061 O 0.080IN SHEET, ALUMINIUM ALLOY, 6061, O,.080 X 48 X 144IN, AMS-QQ-A-250/
11
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 1 of 5
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD. EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE BASE BASE
PRICE PRICE PRICE
IAI CAT. 2005 2006 2007
# No. P/N DESCRIPTION UOM [$/LB] [$/LB] [$/LB]
-- --------- --------------------- ---------------------------------------------------------------- --- ------ ------ ------
77 ++ S 6061 O 0.090IN SHEET, ALUMINIUM ALLOY, 6061, O, .090 X 48 X 000XX, XXX-XX-X-000
/11 LB ++ ++ ++
78 ++ S 6061 O 0.100IN SHEET, ALUMINIUM ALLOY, 6061, O, .100 X 48 X 144IN, AMS-QQ-A-250/
11 LB ++ ++ ++
79 ++ S 6061 O 0.125IN SHEET, ALUMINIUM ALLOY, 6061, O, .125 X 48 X 000XX, XXX-XX-X-000
/11 LB ++ ++ ++
80 ++ S 6061 T4 0.020IN SHEET, ALUMINIUM ALLOY, 6061, T4, .020 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
81 ++ S 6061 T4 0.025IN SHEET, ALUMINIUM ALLOY, 6061, T4, .025 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
82 ++ S 6061 T4 0.032IN SHEET, ALUMINIUM ALLOY, 6061, T4, .032 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
83 ++ S 6061 T4 0.040IN SHEET, ALUMINIUM ALLOY, 6061, T4, .040 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
84 ++ S 6061 T4 0.050IN SHEET, ALUMINIUM ALLOY, 6061, T4, .050 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
85 ++ S 6061 T4 0.063IN SHEET, ALUMINIUM ALLOY, 6061, T4, .063 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
86 ++ S 6061 T4 0.071IN SHEET, ALUMINIUM ALLOY, 6061, T4, .071 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
87 ++ S 6061 T4 0.080IN SHEET, ALUMINIUM ALLOY, 6061, T4, .080 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
88 ++ S 6061 T4 0.100IN SHEET, ALUMINIUM ALLOY, 6061, T4, .100 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
89 ++ S 6061 T4 0.125IN SHEET, ALUMINIUM ALLOY, 6061, T4, .125IN, AMS-QQ-A-250/11 LB ++ ++ ++
90 ++ S 6061 T4 0.190IN SHEET, ALUMINIUM ALLOY, 6061, T4, . 190 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
91 ++ S 6061 T6 0.016IN SHEET, ALUMINIUM ALLOY, 6061, T6, .016 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
92 ++ S 6061 T6 0.020IN SHEET, ALUMINIUM ALLOY, 6061, T6, .020 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
93 ++ S 6061 T6 0.032IN SHEET, ALUMINIUM ALLOY, 6061, T6, .032 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
94 ++ S 6061 T6 0.040IN SHEET, ALUMINIUM ALLOY, 6061, T6, .040 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
95 ++ S 6061 T6 0.040IN Z2 SHEET, ALUMINIUM ALLOY, 6061, T6, .040 X 48 X 168IN, XXX-XX-X-
000/00 XX ++ ++ ++
96 ++ S 6061 T6 0.050IN SHEET, ALUMINIUM ALLOY, 6061, T6, .050 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
97 ++ S 6061 T6 0.063IN SHEET, ALUMINIUM ALLOY, 6061, T6, .063 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
98 ++ S 6061 T6 0.071IN SHEET, ALUMINIUM ALLOY, 6061, T6, .071 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
99 ++ S 6061 T6 0.080IN SHEET, ALUMINIUM ALLOY, 6061, T6, .080 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
100 ++ S 6061 T6 0.090IN SHEET, ALUMINIUM ALLOY, 6061, T6, .090 X 48 X 000XX, XXX-XX-X-000
/11 LB ++ ++ ++
101 ++ S 6061 T6 0.100IN SHEET, ALUMINIUM ALLOY, 6061, T6, .100 X 48 X 000XX, XXX-XX-X-000
/11 LB ++ ++ ++
102 ++ S 6061 T6 0.160IN SHEET, ALUMINIUM ALLOY, 6061, T6, .160 X 48 X 000XX, XXX-XX-X-000
/11 LB ++ ++ ++
103 ++ S 6061 T6 0.190IN SHEET, ALUMINIUM ALLOY, 6061, T6, .190 X 48 X 000XX, XXX-XX-X-000
/11 LB ++ ++ ++
104 ++ S 6061 T6 0.125IN SHEET, ALUMINIUM ALLOY, 6061, T6, .0.125 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
105 ++ P 6061 T6 1.1/4IN SHEET, ALUMINIUM ALLOY, 6061, T6, .1.1/4 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
106 ++ S 6061 T6 3MM SHEET, ALUMINIUM ALLOY, 6061, T6, 3 X 1000 X 2000MM, AMS-QQ-A-
250/11 LB ++ ++ ++
107 ++ S 6061 T6 3MM Z SHEET, ALUMINIUM ALLOY, 6061, T6, 3 X 1200 X 2500MM, AMS-QQ-A-
250/11 LB ++ ++ ++
108 ++ P 6061 T6 3/16IN SHEET, ALUMIKIUM ALLOY, 6061, T6, 3/16IN, AMS-QQ-A-250/11 LB ++ ++ ++
109 ++ S 6061 T6 5MM SHEET, ALUMINIUM ALLOY, 6061, T6, 5 X 1000 X 2000MM, AMS-QQ-A-
250/11 LB ++ ++ ++
110 ++ S 6061 T6 6MM SHEET, ALUMINIUM ALLOY, 6061, T6, 6 X 1000 X 2000MM, AMS-QQ-A-250
/11 LB ++ ++ ++
111 ++ S 7075 O 0.040IN SHEET, ALUMINIUM ALLOY, 7075, O, .040 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
112 ++ S 7075 O 0.050IN SHEET, ALUMINIUM ALLOY, 7075, O, .050 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
113 ++ S 7075 O 0.063IN SHEET, ALUMINIUM ALLOY, 7075, O, .063 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
114 ++ S 7075 O 0.071IN SHEET, ALUMINIUM ALLOY, 7075. O, . 071 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
115 ++ S 7075 O 0.080IN SHEET, ALUMINIUM ALLOY, 7075, O, .080 X 48 X 000XX, XXX-XX-X-000
/12 LB ++ ++ ++
116 ++ S 7075 O 0.090IN SHEET, ALUMINIUM ALLOY, 7075, O, .090 X 48 X 000XX, XXX-XX-X-000
/12 LB ++ ++ ++
117 ++ S 7075 O 0.100IN Z SHEET, ALUMINIUM ALLOY, 7075, O, .100 X 36 X 000XX, XXX-XX-X-000
/12 LB ++ ++ ++
118 ++ S 7075 O 0.125IN SHEET, ALUMINIUM ALLOY, 7075, O, .125 X 48 X 000XX, XXX-XX-X-000
/12 LB ++ ++ ++
119 ++ S 7075 O 0.130IN Z SHEET, ALUMINIUM ALLOY, 7075, O, .130 X 90 X 000XX, XXX-XX-X-000
/12 LB ++ ++ ++
120 ++ S 7075 O 0.160IN SHEET, ALUMINIUM ALLOY, 7075, O, 160 X 48 X 000XX, XXX-XX-X-000
/12 LB ++ ++ ++
121 ++ S 7075 O 0.025IN SHEET, ALUMINIUM ALLOY, 7075, O, 0.025 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
122 ++ S 7075 O 0.100 SHEET, ALUMINIUM ALLOY, 7075, O, 0.100 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
123 ++ S 7075 O 0.100IN SHEET, ALUMINIUM ALLOY, 7075, O, 0.100 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
124 ++ S 7075 O 0.125IN Z2 SHEET, ALUMINIUM ALLOY, 7075, O, 0.125 X 96 X 103IN, XXX-XX-X-
000/00 XX ++ ++ ++
125 ++ S 7075 O 0.200IN Z1 SHEET, ALUMINIUM ALLOY, 7075, O, 0.200 X 94 X 113IN, XXX-XX-X-
000/00 XX ++ ++ ++
126 ++ S 7075 O 0.225IN Z2 SHEET, ALUMINIUM ALLOY, 7075, O, 0.225 X 25 X 000XX, XXX-XX-X-000
/12 LB ++ ++ ++
127 ++ S 7075 T6 0.025IN SHEET, ALUMINIUM ALLOY, 7075, T6, .025 X 48 X 144IN, XXX-XX-X-
000/00 XX ++ ++ ++
128 ++ S 7075 T6 0.032IN SHEET, ALUMINIUM ALLOY, 7075, T6, .032 X 48 X 000XX, XXX-XX-X-000
/12 LB ++ ++ ++
129 ++ S 7075 T6 0.040IN SHEET, ALUMINIUM ALLOY, 7075, T6, .040 X 48 X 144IN, AMS-QQ-A-250
/12 LB ++ ++ ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 2 of 5
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE BASE BASE
PRICE PRICE PRICE
IAI CAT. 2005 2006 2007
# NO. P/N DESCRIPTION UOM [$/LB] [$/LB] [$/LB]
--- --------- ------------------------ ------------------------------------------------------------- --- ------ ------ ------
130 ++ S 7075 T6 0.050IN SHEET, ALUMINIUM ALLOY, 7075, T6, .050 X 48 X 144IN,
AMS-QQ-A-250/12 LB ++ ++ ++
131 ++ S 7075 T6 0.063IN SHEET, ALUMINIUM ALLOY, 7075, T6, .063 X 48 X 144IN,
AMS-QQ-A-250/12 LB ++ ++ ++
132 ++ S 7075 T6 0.080IN SHEET, ALUMINIUM ALLOY, 7075, T6, .080 X 48 X 144IN,
AMS-QQ-A-250/12 LB ++ ++ ++
133 ++ S 7075 T6 0.090IN SHEET, ALUMINIUM ALLOY, 7075, T6, .090 X 48 X 144IN,
AMS-QQ-A-250/12 LB ++ ++ ++
134 ++ S 7075 T6 0.100IN SHEET, ALUMINIUM ALLOY, 7075, T6, .100 X 36 X 144IN,
AMS-QQ-A-250/12 LB ++ ++ ++
135 ++ S 7075 T6 0.125IN SHEET, ALUMINIUM ALLOY, 7075, T6, .125 X 48 X 144IN,
AMS-QQ-A-250/12 LB ++ ++ ++
136 ++ S 7075 T6 0.180IN SHEET, ALUMINIUM ALLOY, 7075, T6, .160 X 48 X 144IN,
AMS-QQ-A-250/12 LB ++ ++ ++
137 ++ S 7075 T6 0.016IN SHEET, ALUMINIUM ALLOY, 7075, T6, 0.016 X 48 X 144IN,
AMS-QQ-A-250/12 LB ++ ++ ++
138 ++ S 7075 T6 0.020IN SHEET, ALUMINIUM ALLOY, 7075, T6, 0.020 X 48 X 144IN,
AMS-QQ-A-250/12 LB ++ ++ ++
139 ++ S 7075 T6 0.040IN Z SHEET, ALUMINIUM ALLOY, 7075, T6, 0.040 X 56 X 126IN,
AMS-QQ-A-250/12 LB ++ ++ ++
140 ++ S 7075 T6 0.100IN Z SHEET, ALUMINIUM ALLOY, 7075, T6, 0.100 X 48 X 144IN,
AMS-QQ-A-250/12 LB ++ ++ ++
141 ++ S 7075 T6 0.200IN SHEET, ALUMINIUM ALLOY, 7075, T6, 0.200 X 48 X 144IN,
AMS-QQ-A-250/12 LB ++ ++ ++
142 ++ S 7075 T6 XX 0.0000X X XXXXX, XXXXXXXXX XXXXX, 0000, X0XX, 0.080 X 55 X 00XX,
XXX-XX-X-000/00xXXX0000 LB ++ ++ ++
143 ++ S 7075 T73 0.125IN SHEET, ALUMINIUM ALLOY, 7075, T73, .125 X 48 X 144IN,
AMS-QQ-A-250/12 LB ++ ++ ++
144 ++ S 7075 T76 0.063IN SHEET, ALUMINIUM ALLOY, 7075, T76, .063 X 48 X 144IN,
AMS-QQ-A-250/24 LB ++ ++ ++
145 ++ S 7075 T76 0.090IN SHEET, ALUMINIUM ALLOY, 7075, T76, .090 X 48 X 144IN,
AMS-QQ-A-250/24 LB ++ ++ ++
146 ++ S 7075 T76 0.100IN SHEET, ALUMINIUM ALLOY, 7075, T76, .100 X 48 X 144IN,
AMS-QQ-A-250/24 LB ++ ++ ++
147 ++ S 7075 T76 0.125IN SHEET, ALUMINIUM ALLOY, 7075, T76, .125 X 48 X 144IN,
AMS-QQ-A-250/24 LB ++ ++ ++
148 ++ S 7075 T76 0.160IN SHEET, ALUMINIUM ALLOY, 7075, T76, .160 X 46 X 144IN,
AMS-QQ-A-250/24 LB ++ ++ ++
149 ++ S 7075 T76 0.080IN M SHEET, ALUMINIUM ALLOY, 7075, T76, 0.080 X 48 X 144IN,
AMS-QQ-A-250/24 LB ++ ++ ++
150 ++ S 2024-CLAD T3 0.012IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .012 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
151 ++ S 2024-CLAD T3 0.016IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .016 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
152 ++ S 2024-CLAD T3 0.020IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .020 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
153 ++ S 2024-CLAD T3 0.025IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .025 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
154 ++ S 2024-CLAD T3 0.032IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .032 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
155 ++ S 2024-CLAD T3 0.040IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .040 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
156 ++ S 2024-CLAD T3 0.040 CMQ SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .040 X 48 X 144IN,
I.A.I. M.S.07.0037 LB ++ ++ ++
157 ++ S 2024-CLAD T3 0.050IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .050 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
158 ++ S 2024-CLAD T3 0.050 CMQ SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .050 X 48 X 144IN,
I.A.I. M.S.07.0037 LB ++ ++ ++
159 ++ S 2024-CLAD T3 0.063IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .063 X 48 X 144IN,
AMS-QQA-250/5A LB ++ ++ ++
160 ++ S 2024-CLAD T3 0.063IN Z SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .063 X 63 X 192IN,
AMS-QQ-A-250/SA LB ++ ++ ++
161 ++ S 2024-CLAD T3 0.071IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .071 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
162 ++ S 2024-CLAD T3 0.071 Z3 SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .071 X 96 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
163 ++ S 2024-CLAD T3 0.080IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .080 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
164 ++ S 2024-CLAD T3 0.090IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .090 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
165 ++ S 2024-CLAD T3 0.090 CMQ SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .090 X 48 X 144IN,
I.A.I. M.S.07.0037 LB ++ ++ ++
166 ++ S 2024-CLAD T3 0.100IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .100 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
167 ++ S 2024-CLAD T3 0.100 Z6 SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .100 X 48 X 220IN,
AMS-QQ-A-250/5A LB ++ ++ ++
168 ++ S 2024-CLAD T3 0.100IN Z SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .100 X 96 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
169 ++ S 2024-CLAD T3 0.100 Z1 SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .100 X 96 X 146IN,
AMS-QQ-A-250/5A LB ++ ++ ++
170 ++ S 2024-CLAD T3 0.190IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .190 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
171 ++ S 2024-CLAD T3 0.200IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, .200 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
172 ++ S 2024-CLAD T3 0.036IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, 0.036 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
173 ++ S 2024-CLAD T3 .036IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, 0.036 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
174 ++ S 2024-CLAD T3 .040IN Z3 SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, 0.040 X 48 X 160IN,
AMS-QQ-A-250/5A LB ++ ++ ++
175 ++ S 2024-CLAD T3 .071CMQZ5 SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, 0.071 X 71 X 130IN,
IA.I. M.S.07.0037 LB ++ ++ ++
176 ++ S 2024-CLAD T3 .071CMQ27 SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, 0.071 X 80 X 135IN,
I A.I. M.S.07.0037 LB ++ ++ ++
177 ++ S 2024-CLAD T3 .071CMQZ8 SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, 0.071 X 94 X 126IN,
IA.I. M.S.07.0037 LB ++ ++ ++
178 ++ S 2024-CLAD T3 0.125IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, 0.125 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
179 ++ S 2024CLAD T3 0.125CMQZ1 SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, 0.125 X 50 X 80IN,
IA.I. MS 07.0037 LB ++ ++ ++
180 ++ S 2024CLAD T3 0.125CMQZ4 SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, 0.125 X 71 X 126IN,
IA.I M.S.07.0037 LB ++ ++ ++
181 ++ S 2024-CLAD T3 0.125INZ1 SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, 0.125 X 80 X 165IN,
AMS-QQ-A-250/5A LB ++ ++ ++
182 ++ S 2024-CLAD T3 0.140IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, 0.140 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 3 of 5
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE BASE BASE
PRICE PRICE PRICE
IAI CAT. 2005 2006 2005
# NO. P/N DESCRIPTION UOM [$/LB] [$/LB] [$/LB]
--- --------- ------------------------ ------------------------------------------------------------- --- ------ ------ ------
183 ++ S 2024-CLAD T3 0.160IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T3, 0.160IN X 1220MM X
3660MM, AMS-QQ-A-250/5A LB ++ ++ ++
190 ++ S 2014-CLAD T6 0.063IN SHEET, ALUMINIUM XXXXX, XXXXXX-0000, T6, .063 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
192 ++ S 2024-CLAD O 0.016IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, 016 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
193 ++ S 2024-CLAD O 0.020IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, .020 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
194 ++ S 2024-CLAD O 0.025IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, .026 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
195 ++ S 2024-CLAD O 0.032IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, .032 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
196 ++ S 2024-CLAD O 0.040IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, .040 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
197 ++ S 2024-CLAD O O.050IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, .050 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
198 ++ S 2024-CLAD O 0.063IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, .063 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
199 ++ S 2024-CLAD O 0.071IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, .071 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
200 ++ S 2024-CLAD O 0.071IN Z7 SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, .071 X 72 X 135IN,
AMS-QQ-A-250/5A LB ++ ++ ++
201 ++ S 2024-CLAD O 0.080IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, .080 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
202 ++ S 2024-CLAD O 0.090IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, .090 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
203 ++ S 2024-CLAD O 0.100IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, .100 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
204 ++ S 2024-CLAD O 0.125IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, .125 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
205 ++ S 2024-CLAD O 0.160IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, .160 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
206 ++ S 0000-XXXX X 0.0000X XXXXX, XXXXXXXXX ALLOY, ALCLAD 2024, O, .190 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
207 ++ S 2024-CLAD O 0.0631N Z1 SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, 0.063 X 65 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
208 ++ S 2024-CLAD O 0.063IN Z6 SHEET, ALUMINIUM ALLOY, ALCLAD 2024, O, 0.063 X 96 X 110IN,
AMS-QQ-A-250/5A LB ++ ++ ++
210 ++ S 2024-CLAD T81 0.040CMQ SHEET, ALUMINIUM ALLOY, ALCLAD 2024, T81, .040 X 48 X 144IN,
IAI MS 070037 LB ++ ++ ++
211 ++ S 2024-CLAD T81 0.050IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, T81, .050 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
212 ++ S 2024-CLAD T81 0.063IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, T81, .063 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
213 ++ S 2024-CLAD T81 0.020IN SHEET, ALUMINIUM ALLOY, ALCLAD 2024, T81, 0.020 X 48 X 144IN,
AMS-QQ-A-250/5A LB ++ ++ ++
214 ++ S 2219-CLAD O 0.040IN SHEET, ALUMINIUM ALLOY, ALCLAD 2219, O, .040 X 48 X 144IN,
AMS 4096A LB ++ ++ ++
215 ++ S 2219-CLAD O 0.083IN Z SHEET, ALUMINIUM ALLOY, ALCLAD 2219, O, .063 X 60 X 180IN,
AMS 4096A LB ++ ++ ++
216 ++ S 2219-CLAD O 0.080IN Z SHEET, ALUMINIUM ALLOY, ALCLAD 2219, O, .080 X 60 X 180IN,
AMS 4096A LB ++ ++ ++
217 ++ S 2219-CLAD O 0.100IN SHEET, ALUMINIUM ALLOY, ALCLAD 2219, O, .100 X 48 X 144IN,
AMS 4096A LB ++ ++ ++
218 ++ S 2219-CLAD T31 0.050IN SHEET, ALUMINIUM ALLOY, ALCLAO 2219, T31, .050 X 48 X 144IN,
AMS 4095B LB ++ ++ ++
219 ++ S 2219-CLAD T31 0.063IN SHEET, ALUMINIUM ALLOY, ALCLAD 2219, T31, .063 X 46 X 144IN,
AMS 4095B LB ++ ++ ++
220 ++ S 2219-CLAD T31 0.100 Z1 SHEET, ALUMINIUM ALLOY, ALCLAD 2219, T31, .100 X 60 X 170IN,
AMS 4095B LB ++ ++ ++
221 ++ S 2219-CLAD T31 0.040IN SHEET, ALUMINIUM ALLOY, ALCLAD 2219, T31, 0.040 X 48 X 144IN,
AMS 4095B LB ++ ++ ++
222 ++ S 7075-CLAD O 0.020IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, O, .020 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
223 ++ S 7075-CLAD O 0.025IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, O, .025 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
224 ++ S 7075-CLAD O 0.032IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, O, .032 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
225 ++ S 7075-CLAD O 0.040IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, O, .040 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
226 ++ S 7075-CLAD O 0.050IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, O, .050 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
227 ++ S 7075-CLAD O 0.063IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, O, .063 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
228 ++ S 7075-CLAD O 0.071IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, O, .071 X 48 X 144IN,
AMS-QQ-A-250/l3 LB ++ ++ ++
229 ++ S 7075-CLAD O 0.080IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, O, .080 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
230 ++ S 7075-CLAD O 0.090IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, O, .090 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
231 ++ S 7075-CLAD O 0.100IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, O, .100 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
232 ++ S 7075-CLAD O 0.125IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, O, .125 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
233 ++ S 7075-CLAD O 0.160IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, O, .160 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
234 ++ S 7075-CLAD O 0.190IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, O, .190 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
235 ++ P 7075-CLAD O 0.250IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, O, .250 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
236 ++ S 7075-CLAD T6 SR.063Z SHEET, ALUMINIUM ALLOY, ALCLAD 7076, T6 SR, 0.063 X 24 X
186IN, AMS-QQ-A-250/13 + DMS 2174A LB ++ ++ ++
237 ++ S 7075-CLAD T6 0.020IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, .020IN,
AMS-QQ-A-250/13 LB ++ ++ ++
238 ++ S 7075-CLAD T6 0.040IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, .040 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
239 ++ S 7075-CLAD T6 0.050IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, .050 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
240 ++ S 7075-CLAD T6 0.063IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, .063 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
241 ++ S 7075-CLAD T6 0.071IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, .071 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
242 ++ S 7075-CLAD T6 0.080IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, .080 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
243 ++ S 7075-CLAD T6 0.090IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, .090 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 4 of 5
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
Base Base Base
Price Price Price
IAI CAT. 2005 2006 2007
# NO. P/N Description UOM [$/LB] [$/LB] [$/LB]
--- --------- ------------------------ ------------------------------------------------------------- --- ------ ------ ------
244 ++ S 7075-CLAD T6 0.100IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, .100 X 48 X 144IN
AMS-QQ-A-250/13 LB ++ ++ ++
245 ++ S 7075-CLAD T6 0.160IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, .160 X 48 X 144IN
AMS-QQ-A-250/13 LB ++ ++ ++
246 ++ S 7075-CLAD T6 0.190IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, .190 X 48 X 144IN
AMS-QQ-A-250/13 LB ++ ++ ++
247 ++ S 7075-CLAD T6 0.0161N SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, 0.016 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
248 ++ S 7075-CLAD T6 0.025IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, 0.025 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
249 ++ S 7075-CLAD T6 0.032IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, 0.032 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
250 ++ S 7075-CLAD T6 0.040 Z2 SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, 0.040 X 60 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
251 ++ S 7075-CLAD T6 0.040 Z1 SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, 0.040 X 60 X 180IN,
AMS-QQ-A-250/13 LB ++ ++ ++
252 ++ S 7075-CLAD T6 0.125IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, 0.125 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
253 ++ S 7075-CLAD T6 0.200IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T6, 0.200 X 48 X 144IN,
AMS-QQ-A-250/13 LB ++ ++ ++
254 ++ S 7075 CLAD T76 0.050IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T76, .050 X 48 X 144IN,
AMS-QQ-A-250/25A LB ++ ++ ++
255 ++ S 7075-CLAD T76 0.125IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T76, .125 X 48 X 144IN,
AMS-QQ-A-250/25A LB ++ ++ ++
256 ++ S 7075-CLAD T76 0.160IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T76, .160 X 60 X 144IN,
AMS-QQ-A-250/25A LB ++ ++ ++
257 ++ S 7075-CLAD T76 0.190IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T76, .190 X 60 X 144IN,
AMS-QQ-A-250/25A LB ++ ++ ++
258 ++ S 7075-CLAD T76 0.100IN SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T76, 0.100 X 48 X 144IN,
AMS-QQ-A-250/25A LB ++ ++ ++
259 ++ 7075-CLAD T76 0.050 CMQ SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T76, CHEM.MILLING
QUALITY,.050 X 48 X 144IN, XX0 XX 000000 LB ++ ++ ++
260 ++ 7075-CLAD T76 0.100 CMQ SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T76, CHEM.MILLING
QUALITY,.100 X 48 X 144IN, IAI MS 070037 LB ++ ++ ++
261 ++ 7075-CLAD T76 063IN CMQ SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T76, CHEM.MILLING
QUALITY, 0.063 X 48 X 144IN, IAI MS 070037 LB ++ ++ ++
262 ++ S 7075-CLAD T76 0.1CMQ Z SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T76, CHEM.MILLING
QUALITY, 0.100 X 41 X 123IN, IAI MS 070037 LB ++ ++ ++
263 ++ S 7075-CLAD T76 0.125CMQ SHEET, ALUMINIUM ALLOY, ALCLAD 7075, T76, CHEM.MILLING
QUALITY, 0.125 X 48 X 144IN, IAI MS 070037 LB ++ ++ ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 5 of 5
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE
IAI CAT. PRICE
# NO. P/N DESCRIPTION UOM [$/LB]
--- --------- --------------------------- -------------------------------------------------------------------------- --- ------
1 ++ F 6061 T6 1/2X3IN BAR FLAT, ALUMINIUM ALLOY, 6061, T6, EXTRUDED, 1/2 X 3IN, AMS-QQ-A-200/8 LB ++
2 ++ F 6061 T651 1/2X4IN BAR FLAT, ALUMINIUM ALLOY, 6061, T651, COLD FIN., 1/2 X 4IN,
AMS-QQ-A-225/8A LB ++
3 ++ F 6061 T651 1/2X6IN BAR FLAT, ALUMINIUM ALLOY, 6061, T651, COLD FIN., 1/2 X 6IN,
AMS-QQ-A-225/8A LB ++
4 ++ F 6061 T651 3/4X1.1/2IN BAR FLAT, ALUMINIUM ALLOY, 6061, T651, COLD FIN., 3/4 X 1.1/2IN,
AMS-QQ-A-225/8A LB ++
18 ++ HB6061 T6511 4.25 X 2.75IN BAR HOLLOW, ALUMINIUM ALLOY, 6061, T6511, EXTRUDED, 4.1/4X2.3/4IN,
AMS-QQ-A-200/8 LB ++
22 ++ D 2024 T351 5IN BAR RD, ALUMINIUM ALLOY, 2024, X000, XXXX XXX, 0XX, XXX-XX-X-000/0X LB ++
23 ++ D 2024 T351 8IN BAR RD, ALUMINIUM ALLOY, 2024, X000, XXXX XXX, 0XX, XXX-XX-X-000/0X LB ++
24 ++ D 2024 T351 1.1/2IN BAR RD, ALUMINIUM ALLOY, 2024, T351, COLD FINISH, 1.1/2IN, AMS-QQ-A-225/6A LB ++
25 ++ D 2024 T351 1.1/8IN BAR RD, ALUMINIUM ALLOY, 2024, T351, COLD FINISH, 1.1/8IN, AMS-QQ-A-225/6A LB ++
26 ++ D 2024 T351 1/2IN BAR RD, ALUMINIUM ALLOY, 2024, T351, COLD FINISH, 1/2IN, AMS-QQ-A-225/6A LB ++
27 ++ D 2024 T351 1/4IN BAR RD, ALUMINIUM ALLOY, 2024, T351, COLD FINISH, 1/4IN, AMS-QQ-A-225/6A LB ++
28 ++ D 2024 T351 1IN BAR RD, ALUMINIUM ALLOY, 2024, T351, COLD FINISH, 1IN, AMS-QQ-A-225/6A LB ++
29 ++ D 2024 T351 2.1/4IN BAR RD, ALUMINIUM ALLOY, 2024, T351, COLD FINISH, 2.1/4IN, AMS-QQ-A-225/6A LB ++
30 ++ D 2024 T351 2.3/4IN BAR RD, ALUMINIUM ALLOY, 2024, T351, COLD FINISH, 2.3/4IN, AMS-QQ-A-225/6A LB ++
31 ++ D 2024 T351 2.3/8IN BAR RD, ALUMINIUM ALLOY, 2024, T351, COLD FINISH, 2.3/8 IN,
AMS-QQ-A-225/6A LB ++
32 ++ D 2024 T351 2IN BAR RD, ALUMINIUM ALLOY, 2024, T351, COLD FINISH, 2IN, AMS-QQ-A-225/6A LB ++
33 ++ D 2024 T351 3/4IN BAR RD, ALUMINIUM ALLOY, 2024, T351, COLD FINISH, 3/4IN, AMS-QQ-A-225/6A LB ++
34 ++ D 2024 T351 3/8IN BAR RD, ALUMINIUM ALLOY, 2024, T351, COLD FINISH, 3/8IN, AMS-QQ-A-225/6A LB ++
35 ++ D 2024 T351 5/16IN BAR RD, ALUMINIUM ALLOY, 2024, T351, COLD FINISH, 5/16IN, AMS-QQ-A-225/6A LB ++
36 ++ D 2024 T351 5/8IN BAR RD, ALUMINIUM ALLOY, 2024, T351, COLD FINISH, 5/8IN, AMS-QQ-A-225/6A LB ++
47 ++ D 2024 T851 1.1/4IN BAR RD, ALUMINIUM ALLOY, 2024, T851, COLD FIN, 1.1/4IN, AMS-QQ-A-225/6A LB ++
48 ++ D 2024 T851 3/4IN BAR RD, ALUMINIUM ALLOY, 2024, T851, COLD FIN, 3/4IN, AMS-QQ-A-225/6A LB ++
49 ++ D 2024 T851 5/8IN BAR RD, ALUMINIUM ALLOY, 2024, T851, COLD FIN, 5/8IN, AMS-QQ-A-225/6A LB ++
56 ++ D 6061 T6 1.3/4IN M BAR RD, ALUMINIUM ALLOY, 6061, T6, COLD FIN, 1.3/4IN, AMS-QQ-A-225/8A LB ++
57 ++ D 6061 T6 1IN M BAR RD, ALUMINIUM ALLOY, 6061, T6, COLD FIN, 1IN, AMS-QQ-A-225/8A LB ++
58 ++ D 6061 T6 3IN M BAR RD, ALUMINIUM ALLOY, 6061, T6, COLD FIN, 3IN, AMS-QQ-A-225/8A LB ++
59 ++ D 6061 T6 1.1/2IN BAR RD, ALUMINIUM ALLOY, 6061, T6, EXTRUDED, 1.1/2IN, AMS-QQ-A-200/8 LB ++
60 ++ D 6061 T6 1.1/4IN BAR RD, ALUMINIUM ALLOY, 6061, T6, EXTRUDED, 1.1/4IN, AMS-QQ-A-200/8 LB ++
61 ++ D 6061 T6 1.1/8IN BAR RD, ALUMINIUM ALLOY, 6061, T6, EXTRUDED, 1.1/8IN, AMS-QQ-A-200/8 LB ++
62 ++ D 6061 T6 1/2IN BAR RD, ALUMINIUM ALLOY, 6061, T6, EXTRUDED, 1/2IN, AMS-QQ-A-200/8 LB ++
63 ++ D 6061 T6 1IN BAR RD, ALUMINIUM ALLOY, 6061, T6, EXTRUDED, 1IN, AMS-QQ-A-200/8 LB ++
64 ++ D 6061 T6 3/4IN BAR RD, ALUMINIUM ALLOY, 6061, T6, EXTRUDED, 3/4IN, AMS-QQ-A-200/8 LB ++
65 ++ D 6061 T6 3/8IN BAR RD, ALUMINIUM ALLOY, 6061, T6, EXTRUDED, 3/8IN, AMS-QQ-A-200/8 LB ++
66 ++ D 6061 T6 4.1/2IN BAR RD, ALUMINIUM ALLOY, 6061, T6, EXTRUDED, 4.1/2IN, AMS-QQ-A-200/8 LB ++
67 ++ D 6061 T6 4IN BAR RD, ALUMINIUM ALLOY, 6061, T6, EXTRUDED, 4IN, AMS-QQ-A-200/8 LB ++
68 ++ D 6061 T6 5/8IN BAR RD, ALUMINIUM ALLOY, 6061, T6, EXTRUDED, 5/8IN, AMS'QQ-A-200/8 LB ++
69 ++ D 6061 T651 1.1/4IN BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN, 1.1/4IN, AMS-QQ-A-225/8A LB ++
70 ++ D 6061 T651 1.3/4IN BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN, 1.3/4IN, AMS-QQ-A-225/8A LB ++
71 ++ D 6061 T651 1/4IN BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN, 1/4IN, AMS-QQ-A-225/8A LB ++
72 ++ D 6061 T651 3IN BAR RD, ALUMINIUM ALLOY, 6061, X000, XXXX XXX, 0XX, XXX-XX-X-000/0X LB ++
73 ++ D 6061 T651 5.1/4IN BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN, 5.1/4IN, AMS-QQ-A-225/8A LB ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 1 of 3
CONFIDENTIAL
IAI - Israel Aircraft Industries Ltd EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE
IAI CAT. PRICE
# NO. P/N DESCRIPTION UOM [$/LB]
--- --------- --------------------------- -------------------------------------------------------------------------- --- ------
74 ++ D 6061 T651 80MM BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN, 80MM, AMS-QQ-A-225/8A LB ++
75 ++ D 6061 T651 1/2IN BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN., 1/2IN, AMS-QQ-A-225/8A LB ++
76 ++ D 6061 T651 1IN BAR RD, ALUMINIUM ALLOY, 6061, X000, XXXX XXX., 0XX, XXX-XX-X-000/0X LB ++
77 ++ D 6061 T651 2-1/4IN BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN., 2.1/4IN, AMS-QQ-A-225/8A LB ++
78 ++ D 6061 T651 3-1/2IN BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN., 3.1/2IN, AMS-QQ-A-225/BA LB ++
79 ++ D 6061 T651 3.1/4 BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN., 3.1/41N, AMS-QQ-A-225/8A LB ++
80 ++ D 6061 T651 3/4IN BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN., 3/4IN, AMS-QQ-A-225/8A LB ++
81 ++ D 6061 T651 3/8IN BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN., 3/8IN, AMS-QQ-A-225/8A LB ++
82 ++ D 6061 T651 4.1/2IN BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN., 4.1/2IN, AMS-QQ-A-225/8A LB ++
83 ++ D 6061 T651 4.1/4IN BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN., 4.1/4IN, AMS-QQ-A-225/8A LB ++
84 ++ D 6061 T651 4IN BAR RD, ALUMINIUM ALLOY, 6061, X000, XXXX XXX., 0XX, XXX-XX-X-000/0X LB ++
85 ++ D 6061 T651 5.1/2IN BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN., 5.1/2IN, AMS-QQ-A-225/8A LB ++
86 ++ D 6061 T651 5/8IN BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN., 5/8IN, AMS-QQ-A-225/8A LB ++
87 ++ D 6061 T651 5IN BAR RD, ALUMINIUM ALLOY, 6061, X000, XXXX XXX., 0XX, XXX-XX-X-000/0X LB ++
88 ++ D 6061 T651 7/8IN BAR RD, ALUMINIUM ALLOY, 6061, T651, COLD FIN., 7/8lN, AMS-QQ-A-225/8A LB ++
89 ++ D 6061 T6511 1/2IN BAR RD, ALUMINIUM ALLOY, 6061, T6511, EXTRUDED, 1/2IN, AMS-QQ-A-200/8 LB ++
90 ++ D 6061 T6511 1/4IN BAR RD, ALUMINIUM ALLOY, 6061, T6511, EXTRUDED, 1/4IN, AMS-QQ-A-200/8 LB ++
91 ++ D 6061 T6511 2-1/2IN BAR RD, ALUMINIUM ALLOY, 6061, T6511, EXTRUDED, 2.1/2IN, AMS-QQ-A-200/8 LB ++
92 ++ D 6061 T6511 2.1/4IN BAR RD, ALUMINIUM ALLOY, 6061, T6511, EXTRUDED, 2.1/4IN, AMS-QQ-A-200/8 LB ++
93 ++ D 6061 T6511 3.1/2IN BAR RD, ALUMINIUM ALLOY, 6061, T6511, EXTRUDED, 3.1/2IN, AMS-QQ-A-200/8 LB ++
94 ++ D 6061 T6511 3.1/4IN BAR RD, ALUMINIUM ALLOY, 6061, T6511, EXTRUDED, 3.1/4IN, AMS-QQ-A-200/8 LB ++
95 ++ D 6061 T6511 3IN BAR RD, ALUMINIUM ALLOY, 6061, T6511, EXTRUDED, 3IN, AMS-QQ-A-200/8 LB ++
96 ++ D 6061 T6511 4.1/2IN BAR RD, ALUMINIUM ALLOY, 6061, T6511, EXTRUDED, 4.1/2IN, AMS-QQ-A-200/8 LB ++
97 ++ D 0X00 X0000 4.1/4IN BAR RD, ALUMINIUM ALLOY, 6061, T6511, EXTRUDED, 4.1/4IN, AMS-QQ-A-200/8 LB ++
98 ++ D 6061 T6511 4IN BAR RD, ALUMINIUM ALLOY, 6061, T6511, EXTRUDED, 4IN, AMS-QQ-A-200/8 LB ++
99 ++ D 6061 T6511 5.1/2IN BAR RD, ALUMINIUM ALLOY, 6061, T6511, EXTRUDED, 5.1/2IN, AMS-QQ-A-200/8 LB ++
100 ++ D 6061 T6511 5.1/4IN BAR RD, ALUMINIUM ALLOY, 6061, T6511, EXTRUDED, 5.1/4IN, AMS-QQ-A-200/8 LB ++
101 ++ D 6061 T6511 5IN BAR RD, ALUMINIUM ALLOY, 6061, T6511, EXTRUDED, 5IN, AMS-QQ-A-200/8 LB ++
113 ++ D 7075 T6 3/8IN BAR RD, ALUMINIUM ALLOY, 7075, T6, COLD FIN., 3/8IN, AMS-QQ-A-225/9 LB ++
114 ++ D 7075 T651 1.1/2IN BAR RD, ALUMINIUM ALLOY, 7075, T651, COLD FIN., 1.1/2IN, AMS-QQ-A-225/9 LB ++
115 ++ D 7075 T651 1.1/4IN BAR RD, ALUMINIUM ALLOY, 7075, T651, COLD FIN., 1.1/4IN, AMS-QQ-A-225/9 LB ++
116 ++ D 7075 T651 1/2IN BAR RD, ALUMINIUM ALLOY, 7075, T651, COLD FIN., 1/2IN, AMS-QQ-A-225/9 LB ++
117 ++ D 7075 T651 1IN BAR RD, ALUMINIUM ALLOY, 7075, X000, XXXX XXX., 0XX, XXX-XX-X-000/0 LB ++
118 ++ D 7075 T651 2.1/2IN BAR RD, ALUMINIUM ALLOY, 7075, T651, COLD FIN., 2.1/2IN, AMS-QQ-A-225/9 LB ++
119 ++ D 7075 T651 2.3/4IN BAR RD, ALUMINIUM ALLOY, 7075, T651, COLD FIN., 2.3/4IN, AMS-QQ-A-225/9 LB ++
120 ++ D 7075 T651 2IN BAR RD, ALUMINIUM ALLOY, 7075, X000, XXXX XXX., 0XX, XXX-XX-X-000/0 LB ++
121 ++ D 7075 T651 3/4IN BAR RD, ALUMINIUM ALLOY, 7075, T651, COLD FIN., 3/4IN, AMS-QQ-A-225/9 LB ++
122 ++ D 7075 T651 3IN BAR RD, ALUMINIUM ALLOY, 7075, X000, XXXX XXX., 0XX, XXX-XX-X-000/0 LB ++
123 ++ D 7075 T651 5.1/2IN BAR RD, ALUMINIUM ALLOY, 7075, T651, COLD FIN., 5.1/2IN, AMS-QQ-A-225/9 LB ++
124 ++ D 7075 T651 5 8IN BAR RD, ALUMINIUM ALLOY, 7075, T651, COLD FIN., 5/8IN, AMS-QQ-A-225/9 LB ++
125 ++ D 7075 T651 6IN BAR RD, ALUMINIUM ALLOY, 7075, X000, XXXX XXX., 0XX, XXX-XX-X-000/0 LB ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 2 of 3
CONFIDENTIAL
IAI - Israel Aircraft Industries Ltd EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE
IAI CAT. PRICE
# No. P/N DESCRIPTION UOM [$/LB]
--- --------- --------------------------- -------------------------------------------------------------------------- --- ------
126 ++ D 7075 T651 7/8IN BAR RD, ALUMINIUM ALLOY, 7075, T651, COLD FIN., 7/8IN, AMS-QQ-A-225/9 LB ++
128 ++ D 7075 T7351 2.3/4IN BAR RD, ALUMINIUM ALLOY, 7075, T7351, COLD FIN., 2.3/4IN, AMS-QQ-A-225/9 LB ++
129 ++ D 7075 T7351 3.1/4IN BAR RD, ALUMINIUM ALLOY, 7075, T7351, COLD FIN., 3.1/4IN, AMS-QQ-A-225/9 LB ++
130 ++ D 7075 T7351 3IN BAR RD, ALUMINIUM ALLOY, 7075, X0000, XXXX XXX., 0XX, XXX-XX-X-000/0 LB ++
131 ++ D 7075 T7351 1.1/2IN BAR RD, ALUMINIUM ALLOY, 7075, T7351, COLD FIN., 1.1/2IN, AMS-QQ-A-225/9 LB ++
132 ++ D 7075 T7351 1.1/4IN BAR RD, ALUMINIUM ALLOY, 7075, T7351, COLD FIN., 1.1/4IN, AMS-QQ-A-225/9 LB ++
133 ++ D 7075 T7351 1.3/4IN BAR RD, ALUMINIUM ALLOY, 7075, T7351, COLD FIN., 1.3/41N, AMS-QQ-A-225/9 LB ++
134 ++ D 7075 T7351 1.3/8IN BAR RD, ALUMINIUM ALLOY, 7075, T7351, COLD FIN., 1.3/8IN, AMS-QQ-A-225/9 LB ++
135 ++ D 7075 T7351 1/2IN BAR RD, ALUMINIUM ALLOY, 7075, T7351, COLD FIN., 1/2IN, AMS-QQ-A-225/9 LB ++
136 ++ D 7075 T7351 1IN BAR RD, ALUMINIUM ALLOY, 7075, X0000, XXXX XXX., 0XX, XXX-XX-X-000/0 LB ++
137 ++ D 7075 T7351 2.1/2IN BAR RD, ALUMINIUM ALLOY, 7075, T7351, COLD FIN., 2.1/2IN, AMS-QQ-A-225/9 LB ++
138 ++ D 7075 T7351 2.1/4IN BAR RD, ALUMINIUM ALLOY, 7075, T7351, COLD F1N., 2.1/4IN, AMS-QQ-A-225/9 LB ++
139 ++ D 7075 T7351 2IN BAR RD, ALUMINIUM ALLOY, 7075, X0000, XXXX XXX., 0XX, XXX-XX-X-000/0 LB ++
140 ++ D 7075 T7351 3/4IN BAR RD, ALUMINIUM ALLOY, 7075, T7351, COLD FIN., 3/4IN, AMS-QQ-A-225/9 LB ++
141 ++ D 7075 T7351 5/8IN BAR RD, ALUMINIUM ALLOY, 7075, T7351, COLD FIN., 5/8IN, AMS-QQ-A-225/9 LB ++
142 ++ D 7075 T7351 7/8IN BAR RD, ALUMINIUM ALLOY, 7075, T7351, COLD FIN., 7/8IN, AMS-QQ-A-225/9 LB ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 3 of 3
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD. EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE
IAI CAT. PRICE
# NO. P/N DESCRIPTION UOM [$/LB]
--- --------- --------------------------- -------------------------------------------------------------------------- --- ------
43 ++ D 17-4PH ST 2.3/4IN BAR RD, STAINLESS STEEL, 17-4PH, SOL'N HT, 2.75IN, AMS 5643Q LB ++
41 ++ D 17-4PH ST 1IN M BAR RD, STAINLESS STEEL, 17-4PH, SOL'N HT, CENTRL GROUND, 1IN, AMS 5643Q LB ++
40 ++ D 17-4PH ST 1IN BAR RD, STAINLESS STEEL, 17-4PH, SOL'N HT, 1IN, AMS 5643Q LB ++
39 ++ D 17-4PH ST 1.1/4IN BAR RD, STAINLESS STEEL, 17-4PH, SOL'N HT, 1.25IN, AMS 5643Q LB ++
38 ++ D 17-4PH XXX 7/8IN BAR RD, STAINLESS STEEL, 17-4PH, SOL'N HT, .875IN, AMS 5643Q LB ++
37 ++ D 17-4PH XXX 5/8IN BAR RD, STAINLESS STEEL, 17-4PH, SOL'N HT, 5/8IN, AMS 5643Q LB ++
36 ++ D 17-4PH XXX 3/8IN BAR RD, STAINLESS STEEL, 17-4PH, SOL'N HT, .375IN, AMS 5643Q LB ++
35 ++ D 17-4PH XXX 3.1/2IN BAR RD, STAINLESS STEEL, 17-4PH, SOL'N HT, 3.1/2IN, AMS 5643Q LB ++
34 ++ D 17-4PH XXX 2.1/4IN BAR RD, STAINLESS STEEL, 17-4PH, SOL'N HT, 2.1/4IN, AMS 5643Q LB ++
33 ++ D 17-4PH XXX 1/2IN BAR RD, STAINLESS STEEL, 17-4PH, SOL'N HT, 1/2IN, AMS 5643Q LB ++
32 ++ D 15 5PHCEM ST 3/4IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, .75IN, AMS 5659K LB ++
31 ++ D 15 5PHCEM ST 1IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, 1IN, AMS 5659K LB ++
30 ++ D 15 5PHCEM ST 2IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, 2IN, AMS 5659K LB ++
29 ++ D 15-5PHCEM XXX 5/8IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, CENTR.GROUND, 5/8IN,AMS
5659K LB ++
28 ++ D 00-0XXXXX XX 9.1/2IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, 9.1/2IN, AMS 5659K LB ++
22 ++ D 15-5PHCEM ST 5/8IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, CENTR.GROUND, 5/8IN,AMS
5659K LB ++
21 ++ D 15-5PHCEM ST 5/16IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, CENTR.GROUND, 5/16IN, AMS
5659K LB ++
19 ++ D 00-0XXXXX XX 3IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, CENTR.GROUND, 3IN, AMS
5659K LB ++
18 ++ D 15-5PHCEM ST 3/8IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, CENTR.GROUND, 3/8IN, AMS
5659K LB ++
15 ++ D 00-0XXXXX XX 2.1/4IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, CENTR.GROUND, 2.1/4IN,AMS
5659K LB ++
14 ++ D 00-0XXXXX XX 2.1/2IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, 2.5IN, AMS 5659K LB ++
13 ++ D 00-0XXXXX XX 15IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, CENTR.GROUND, 15IN, AMS
5659K LB ++
12 ++ D 00-0XXXXX XX 15/16IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, CENTR.GROUND, 15/16IN, AMS
5659K LB ++
10 ++ D 15-5PHCEM ST 1/4IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, 25IN, AMS 5659K LB ++
8 ++ D 00-0XXXXX XX 1.3/8IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, 1.3/8IN, AMS 5659K LB ++
7 ++ D 00-0XXXXX XX 1.3/4IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, 1.75IN, AMS 5659K LB ++
6 ++ D 00-0XXXXX XX 1.3/16IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, CENTR.GROUND, 1.3/16IN, AMS
5659K LB ++
5 ++ D 00-0XXXXX XX 1.1/8IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, CENTR.GROUND, 1.1/8IN, AMS
5659K LB ++
4 ++ D 00-0XXXXX XX 1.1/4IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, 1.1/4IN, AMS 5659K LB ++
3 ++ D 15-5PHCEM XXX 9/16IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, 9/16IN, AMS 5659K LB ++
1 ++ D 15-5PHCEM ST 7/8IN BAR RD, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, .875IN, AMS 5659K LB ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 2 of 2
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD. EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE
IAI CAT. PRICE
# No. P/N DESCRIPTION UOM [$/LB]
--- --------- --------------------------- -------------------------------------------------------------------------- --- ------
113 ++ D XX00 0XX XXX 0.0/00X XXX XX, XXXXXXXXX XXXXX, XX00-0XX, SOL N HT, 2.3/4IN, AMS 5629E LB ++
112 ++ D XX00 0XX XXX 0.0/0XX XXX XX, XXXXXXXXX XXXXX, XX00-0XX, SOL N HT, 1.3/4IN, AMS 5629E LB ++
111 ++ D PH13-8MO ST 1.1/4IN BAR RD, STAINLESS STEEL, PH13-8MO, SOL N HT, GROUND, 1.1/4IN, DMS2100F LB ++
110 ++ D PH13-8MO SHT 0/00XX XXX XX, XXXXXXXXX XXXXX, XX00-0XX, SOL N HT, 7/16IN, AMS 5629E LB ++
109 ++ D PH13-8MO SHT 4.3/4IN BAR RD, STAINLESS STEEL, PH13-8MO, SOL N HT, CENTR.GROUND, 4.3/4IN, AMS
5629E LB ++
108 ++ D PH13-8MO SHT 0/0XX XXX XX, XXXXXXXXX XXXXX, XX00-0XX, SOL N HT, 3/4IN, AMS 5629E LB ++
107 ++ D PH13-8MO SHT 2.1/2IN BAR RD, STAINLESS STEEL, PH13-8MO, SOL N HT, 2.1/2IN, AMS 5629E LB ++
106 ++ D PH13-8MO SHT 1IN BAR RD, STAINLESS STEEL, PH13-8MO, SOL N HT, 1IN, AMS 5629E LB ++
105 ++ D PH13-8MO XXX 0/0XX XXX XX, XXXXXXXXX XXXXX, XX00-0XX, SOL N HT, 5/8IN, AMS 5629E LB ++
104 ++ D PH13-8MO XXX 4.1/4IN BAR RD, STAINLESS STEEL, PH13-8MO, SOL N HT, 4.1/4IN, AMS 5629E LB ++
103 ++ D PH13-8MO XXX 3.3/4IN BAR RD, STAINLESS STEEL, PH13-8MO, SOL N HT, 3.3/4IN, AMS 5629E LB ++
102 ++ D PH13-8MO XXX 3.1/2IN BAR RD, STAINLESS STEEL, PH13-8MO, SOL N HT, 3.1/2IN, AMS 5629E LB ++
101 ++ D PH13-8MO XXX 0XX XXX XX, XXXXXXXXX XXXXX, XX00-0XX, SOL N HT, 2IN, AMS 5629E LB ++
100 ++ D PH13-8MO XXX 2.1/4IN BAR RD, STAINLESS STEEL, PH13-8MO, SOL N HT, 2.1/4IN, AMS 5629E LB ++
99 ++ D PH13-8MO XXX 1.3/8IN BAR RD, STAINLESS STEEL, PH13-8MO, SOL N HT, 1.3/8IN, AMS 5629E LB ++
98 ++ D PH13-8MO XXX 1.1/8IN BAR RD, STAINLESS STEEL, PH13-8MO, SOL N HT, 1.1/8IN, AMS 5629E LB ++
97 ++ D PH13-8MO XXX 1.1/4IN BAR RD, STAINLESS STEEL, PH13-8MO, SOL N HT, CENTR.GROUND, 1.250IN, AMS
5629E LB ++
96 ++ D PH13-8MO 3.1/4IN BAR RD, STAINLESS STEEL, PH13-8MO, SOL N HT, 3.1/4IN, AMS 5629E LB ++
82 ++ D AISI316L XXX 3/8IN BAR RD, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 3/8IN, AMS-QQ-S-763
COND.A LB ++
81 ++ D AISI316L XXX 3/4IN BAR RD, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 3/4IN, AMS-QQ-S-763
COND.A LB ++
80 ++ D AISI316L XXX 1IN BAR RD, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 1IN,
AMS-QQ-S-763 COND.A LB ++
79 ++ D AISI316L XXX 1/2IN BAR RD, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 1/2IN, AMS-QQ-S-763
COND.A LB ++
78 ++ D AISI316L XXX 1.1/8IN BAR RD, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 1.1/8IN, AMS-QQ-S-763
COND.A LB ++
77 ++ D AISI316L XXX 1.1/2IN BAR RD, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 1.1/2IN, AM S-QQ-S-763
COND.A LB ++
76 ++ D AISI316-L XXX 1/4IN BAR RD, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 1/4IN, AMS-QQ-S-763
COND.A LB ++
75 ++ D AISI316-L XXX 1.1/4IN BAR RD, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 1.1/4IN, AMS-QQ-S-763
COND.A LB ++
74 ++ D AISI304L XXX 8MM BAR RD, STAINLESS STEEL, AISI TYPE 304L, ANNEALED, 8 MM, AMS-QQ-S-763
COND.A LB ++
73 ++ D AISI304L XXX 1IN BAR RD, STAINLESS STEEL, AISI TYPE 304L, ANNEALED, COLD FIN,1IN,
AMS-QQ-S-763 COND.A LB ++
72 ++ D AISI304 XXX 5/8IN BAR RD, STAINLESS STEEL, AISI TYPE 304, ANNEALED, 5/8IN, AMS-QQ-S-763
COND.A LB ++
71 ++ D AISI304 XXX 5/16IN BAR RD, STAINLESS STEEL, AISI TYPE 304, ANNEALED, 5/16IN, AMS-QQ-S-763
COND.A LB ++
70 ++ D AISI304 XXX 4MM BAR RD, STAINLESS STEEL, AISI TYPE 304, ANNEALED, 4MM, AMS-QQ-S-763
COND.A LB ++
69 ++ D AISI304 XXX 3/8IN BAR RD, STAINLESS STEEL, AISI TYPE 304, ANNEALED, 3/8IN, AMS-QQ-S-763
COND.A LB ++
68 ++ D AISI304 XXX 3/4IN BAR RD, STAINLESS STEEL, AISI TYPE 304, ANNEALED, 3/4IN, AMS-QQ-S-763
COND.A LB ++
67 ++ D AISI304 XXX 1IN BAR RD, STAINLESS STEEL, AISI TYPE 000, XXXXXXXX, 0XX, XXX-XX-X-000 COND.A LB ++
66 ++ D AISI304 XXX 1/4IN BAR RD, STAINLESS STEEL, AISI TYPE 304, ANNEALED, 1/4IN, AMS-QQ-S-763
COND.A LB ++
65 ++ D AISI304 XXX 1/2IN M BAR RD, STAINLESS STEEL, AISI TYPE 304, ANNEALED, 1/2IN, COMMERCIAL LB ++
64 ++ D AISI304 XXX 1/2IN BAR RD, STAINLESS STEEL, AISI TYPE 304, ANNEALED, 1/2IN, AMS-QQ-S-763
COND.A LB ++
63 ++ D AISI304 XXX 1.3/4IN BAR RD, STAINLESS STEEL, AISI TYPE 304, ANNEALED, 1 3/4IN, AMS-QQ-S-763
COND.A LB ++
62 ++ D AISI304 XXX 1.1/4IN BAR RD, STAINLESS STEEL, AISI TYPE 304, ANNEALED, 1.25IN, AMS-QQ-S-763
COND.A LB ++
61 ++ D AISI304 XXX 1.1/2IN BAR RD, STAINLESS STEEL, AISI TYPE 304, ANNEALED, COLD FIN.1.1/2IN, AM
S-QQ-S-763 COND.A LB ++
52 ++ D AISI316L XXX 45MM BAR RD, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 45MM, AMS-QQ-S-763
COND.A LB ++
50 ++ D 17 4PH ST 1.1/2IN BAR RD, STAINLESS STEEL, 17-4PH, SOL'N HT, 1.5IN, AMS 5643Q LB ++
49 ++ D 17-4PH ST 9IN BAR RD, STAINLESS STEEL, 17-4PH, SOL'N HT, 9IN, AMS 5643Q LB ++
47 ++ D 17-4PH ST 5/8IN BAR RD, STAINLESS STEEL, 17-4PH, SOL'N HT, CENTRL. GROUND,5/8IN, AMS 5643Q LB ++
46 ++ D 17-4PH ST 3/4IN BAR RD, STAINLESS STEEL, 17-4PH, SOL'N HT, 3/4IN, AMS 5643Q LB ++
45 ++ D 17-4PH ST 2IN BAR RD, STAINLESS STEEL, 17-4PH, SOL'N HT, 2IN, AMS 5643Q LB ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 1 of 2
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD. EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE
IAI CAT. PRICE
# NO. P/N DESCRIPTION UOM [$/LB]
--- --------- --------------------------- -------------------------------------------------------------------------- --- ------
1 ++ P 15-5PHCEM SHT 1/2IN PLATE, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, DESCALED, 1/2 X 36 X 120IN,
AMS 5862E LB ++
2 ++ P 15-5PHCEM SHT 2.1/2IN PLATE, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, DESCALED, 2.1/2 X 36 X
120IN, AMS 5862E LB ++
3 ++ P 15-5PHCEM SHT 2IN PLATE, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, DESCALED, 2 X 36 X 120IN,
AMS 5862E LB ++
4 ++ P 15-5PHCEM SHT 3/4IN PLATE, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, DESCALED, 3/4 X 36 X 120IN,
AMS 5862E LB ++
5 ++ P 15-5PHCEM SHT 4IN PLATE, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, DESCALED, 4 X 36 X 120IN,
AMS 5862E LB ++
6 ++ P 15-5PHCEM SHT 5/8IN PLATE, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, DESCALED, 5/8 X 36 X 120IN,
AMS 5862E LB ++
7 ++ P 15-5PHCEVM XXX 1.1/2IN PLATE, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, DESCALED, 1.1/2 X 36 X
120IN, AMS 5862E LB ++
8 ++ P 15-5PHCEVM XXX 1.1/4IN PLATE, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, DESCALED, 1.1/4 X 36 X
120IN, AMS 5862E LB ++
9 ++ P 15-5PHCEVM XXX 1/2IN PLATE, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, DESCALED, 1/2 X 36 X 120IN,
AMS 5862E LB ++
10 ++ P 15-5PHCEVM XXX 1/4IN PLATE, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, DESCALED, 1/4 X 36 X 120IN,
AMS 5862E LB ++
11 ++ P 15-5PHCEVM ST 1IN PLATE, STAINLESS STEEL, 15-5PH CEM, SOL'N HT, DESCALED, 1 X 36 X 120IN,
AMS 5862E LB ++
12 ++ P 17-4PH XXX 1/2IN PLATE, STAINLESS STEEL, 17-4PH, SOL'N HT, HOT RLD, 1/2 X 36 X 120IN,
AMS 5604E LB ++
13 ++ P 17-4PH SHT 1/2IN PLATE, STAINLESS STEEL, 17-4PH, SOL'N HT, HOT RLD, 1/2 X 36 X 120IN,
AMS 5604E LB ++
14 ++ P 17-4PH SHT 2.1/4IN PLATE, STAINLESS STEEL, 17-4PH, SOL'N HT, HOT RLD DESCALED, 2.1/4 X 36 X
120IN, AMS 5604E LB ++
15 ++ P 17-4PH SHT 3/4IN PLATE, STAINLESS STEEL, 17-4PH, SOL'N HT, HOT RLD, 3/4 X 36 X 120IN, AMS
5604E LB ++
16 ++ P 17-4PH SHT 3/8IN PLATE, STAINLESS STEEL, 17-4PH, SOL'N HT, HOT RLD, 3/8 X 36 X 120IN, AMS
5604E LB ++
17 ++ P 17-4PH SHT 5/8IN PLATE, STAINLESS STEEL, 17-4PH, SOL'N HT, HOT RLD, 5/8 X 36 X 120IN, AMS
5604E LB ++
18 ++ P AISI303 XXX 1.1/2IN PLATE, STAINLESS STEEL, AISI TYPE 303, ANNEALED, 1.1/2 X 36 X 120IN,
COMMERCIAL GRADE LB ++
19 ++ P AISI303 XXX 1.3/4IN PLATE, STAINLESS STEEL, AISI TYPE 303, ANNEALED, 1.3/4 X 36 X 120IN,
COMMERCIAL GRADE LB ++
20 ++ P AISI303 XXX 1/2IN PLATE, STAINLESS STEEL, AISI TYPE 303, ANNEALED, 1/2 X 36 X 120IN,
COMMERCIAL GRADE LB ++
21 ++ P AISI303 XXX 1IN PLATE, STAINLESS STEEL, AISI TYPE 303, ANNEALED, 1 X 36 X 120IN,
COMMERCIAL GRADE LB ++
22 ++ P AISI303 XXX 2.1/2 IN PLATE, STAINLESS STEEL, AISI TYPE 303, ANNEALED, 2.1/2 X 36 X 120IN,
COMMERCIAL GRADE LB ++
23 ++ P AISI303 XXX 2IN PLATE, STAINLESS STEEL, AISI TYPE 303, ANNEALED, 2 X 36 X 120IN,
COMMERCIAL GRADE LB ++
24 ++ P AISI303 XXX 3/4IN PLATE, STAINLESS STEEL, AISI TYPE 303, ANNEALED, 3/4 X 36 X 120IN,
COMMERCIAL GRADE LB ++
25 ++ P AISI303 XXX 5/8IN PLATE, STAINLESS STEEL, AISI TYPE 303, ANNEALED, 5/8 X 36 X 120IN,
COMMERCIAL GRADE LB ++
28 ++ P AISI316L XXX 1.1/4 M Z PLATE, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 1.1/4 X 72 X 144IN,
ASTM A-240 LB ++
29 ++ P AISI316L XXX 1.3/4IN M PLATE, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 1.3/4 X 36 X 120IN,
ASTM A-240 LB ++
30 ++ P AISI316L XXX 1.3/8IN PLATE, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 1.3/8 X 36 X 120IN,
ASTM A-240 LB ++
31 ++ P AISI316L XXX 10MM M PLATE, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 10 X 1000 X 2000MM,
ASTM A-240 LB ++
32 ++ P AISI316L XXX 12MM M PLATE, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 12 X 1000 X 2000MM,
ASTM A-240 LB ++
33 ++ P AISI316L XXX 16MM M PLATE, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 16 X 1000 X 2000MM,
ASTM A-240 LB ++
34 ++ P AISI316L XXX 20MM M PLATE, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 20 X 1000 X 2000MM,
ASTM A-240 LB ++
35 ++ P AISI316L XXX 3IN PLATE, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 3 X 36 X 120IN, ASTM
A-240 LB ++
36 ++ P AISI316L XXX 50MM M PLATE, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 50 X 1000 X 2000MM,
ASTM A-240 LB ++
37 ++ P AISI316L XXX 6MM M PLATE, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 6 X 1000 X 2000MM,
ASTM A-240 LB ++
38 ++ P AISI316L XXX 70MM PLATE, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 70 X 1000 X 2000MM,
ASTM A-240 LB ++
39 ++ P AISI316L XXX 8MM PLATE, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 8MM X 36IN X 120IN,
ASTM A-240 LB ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 1 of 1
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD. EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE
IAI CAT. PRICE
# NO. P/N DESCRIPTION UOM [$/LB]
--- --------- --------------------------- -------------------------------------------------------------------------- --- ------
45 ++ S AISI304L XXX 0.080IN SHEET, STAINLESS STEEL, AISI TYPE 304L, ANNEALED, XX 0X, .000 X 00 X
000XX, XXXX X-000 XX ++
46 ++ S AISI304L XXX 0.120IN SHEET, STAINLESS STEEL, AISI TYPE 304L, ANNEALED, XX 0X, .000 X 00 X
000XX, XXXX X-000 XX ++
47 ++ S AISI304L XXX 1.5MM M SHEET, STAINLESS STEEL, AISI TYPE 304L, ANNEALED, 1.5 X 1500 X 3000MM,
ASTM A-240 LB ++
48 ++ S AISI304L XXX 3MM SHEET, STAINLESS STEEL, AISI TYPE 304L, ANNEALED, XX 0X, 0XX, XXXX X-000 XX ++
49 ++ S AISI316 XXX 1.9MM SHEET, STAINLESS STEEL, AISI TYPE 316, ANNEALED, 1.9 X 1000 X 2000MM,
COMMERCIAL LB ++
50 ++ S AISI316L XXX 0.032IN SHEET, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, .032IN, ASTM A-666 LB ++
51 ++ S AISI316L XXX 2MM M SHEET, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 2 X 1000 X 2000MM,
ASTM A-240 LB ++
52 ++ S AISI316L XXX 3/16IN SHEET, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 3/16 X 36 X 120IN,
ASTM A-666 LB ++
53 ++ S AISI316L XXX 4MM SHEET, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 4 X 1400 X 2000MM,
ASTM A-240 LB ++
54 ++ S AISI316L XXX 5MM M SHEET, STAINLESS STEEL, AISI TYPE 316L, ANNEALED, 5 X 1000 X 2000MM,
ASTM A-240 LB ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 1 of 1
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD. EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE
IAI CAT. PRICE
# No. P/N DESCRIPTION UOM [$/LB]
--- --------- --------------------------- -------------------------------------------------------------------------- --- ------
13 ++ D SAE 4340 NORM 1.1/2IN BAR RD, LOW ALLOY STEEL, SAE 4340, NORMALIZED, HOT RLD, 1.1/2IN, SAE
AMS-S-5000 COND D LB ++
14 ++ D SAE 4340 NORM 20MM BAR RD, LOW ALLOY STEEL, SAE 4340, NORMALIZED, HOT RLD, 20MM, SAE
AMS-S-5000 COND D LB ++
15 ++ D SAE 4130 XXX 1 1/4IN BAR RD, LOW ALLOY STEEL, SAE 4130, ANNEALED, COLD FIN, 1.1/4IN,
AMS-S-6758 COND. C LB ++
16 ++ D SAE 4130 XXX 1/2IN BAR RD, LOW ALLOY STEEL, SAE 4130, ANNEALED, COLD FIN, 1/2IN,
AMS-S-6758 COND. C LB ++
17 ++ D SAE 4130 XXX 1/4IN BAR RD, LOW ALLOY STEEL, SAE 4130, ANNEALED, COLD FIN, 1/4IN,
AMS-S-6758 COND. C LB ++
18 ++ D SAE 4130 XXX 3/4IN BAR RD, LOW ALLOY STEEL, SAE 4130, ANNEALED, COLD FIN, 3/4IN,
AMS-S-6758 COND. C LB ++
19 ++ D SAE 4130 XXX 5/8IN BAR RD, LOW ALLOY STEEL, SAE 4130, ANNEALED, COLD FIN, 5/8IN,
AMS-S-6758 COND. C LB ++
20 ++ D SAE 4130 XXX 7/8IN M BAR RD, LOW ALLOY STEEL, SAE 4130, ANNEALED, COLD FIN, 7/8IN, ASTM A-29 LB ++
21 ++ D SAE 4130 XXX 8MM BAR RD, LOW ALLOY STEEL, SAE 4130, ANNEALED, HOT FIN, 8MM,
AMS-S-6758 COND. C LB ++
22 ++ D SAE 4130 HT 1.1/4IN BAR RD, LOW ALLOY STEEL, SAE 4130, H+T 125 KSl MIN, COLD FIN,1.1/4IN,
AMS-S-6758 COND.F LB ++
23 ++ D SAE 4130 XX 0/0XX XXX XX, XXX XXXXX XXXXX, XXX 0000, H+T 125 KSl MIN, COLD F1N.,25IN,
AMS-S-6758 COND.F LB ++
24 ++ D SAE 4130 HT 1IN BAR RD, LOW ALLOY STEEL, SAE 4130, H+T 000 XXx XXX, XXXX XXX, 0XX,
XXX-X-0000 COND.F LB ++
25 ++ D SAE 4130 XX 0/0XX XXX XX, XXX XXXXX XXXXX, XXX 0000, H+T 000 XXx XXX, XXXX XXX, 0/00X,
XXX-X-0000 COND.F LB ++
26 ++ D SAE 4130 XX 0/0XX XXX XX, XXX XXXXX XXXXX, XXX 0000, H+T 125 KSl MIN, COLD FIN, 3/8IN,
AMS-S-6758 COND.F LB ++
27 ++ D SAE 4130 XX 0/0XX XXX XX, XXX XXXXX XXXXX, XXX 0000, H+T 125 KSl MIN, COLD FIN, 5/8IN,
AMS-S-6758 COND.F LB ++
28 ++ D SAE 4130 HT 0/00XX XXX XX, XXX XXXXX XXXXX, XXX 0000, H+T 125 KSl MIN, COLD FIN., 437IN,
AMS-S-6758 COND.F LB ++
29 ++ D SAE 4130 NORM 1-1/4IN BAR RD, LOW ALLOY STEEL, SAE 4130, NORMALIZED, COLD FIN., 1.1/4IN,
AMS-S-6758 COND.D LB ++
30 ++ D SAE 4130 NORM 1.1/2IN BAR RD, LOW ALLOY STEEL, SAE 4130, NORMALIZED, COLD FIN, 1.1/2IN,
AMS-S-6758 COND.D LB ++
31 ++ D SAE 4130 NORM 1/4IN BAR RD, LOW ALLOY STEEL, SAE 4130, NORMALIZED, COLD FIN, 1/4IN,
AMS-S-6758 COND.D LB ++
32 ++ D SAE 4130 NORM 100MM M BAR RD, LOW ALLOY STEEL, SAE 4130, NORMALIZED, COLD F1N, 100MM, ASTM A-29 LB ++
33 ++ D SAE 4130 NORM 108MM BAR RD, LOW ALLOY STEEL, SAE 4130, NORMALIZED, COLD FIN, 108MM,
AMS-S-6758 COND.D LB ++
36 ++ D SAE 4130 NORM 16MM BAR RD, LOW ALLOY STEEL, SAE 4130, NORMALIZED, COLD FIN, 16MM,
AMS-S-6758 COND.D LB ++
37 ++ D SAE 4130 NORM 1IN BAR RD, LOW ALLOY STEEL, SAE 4130, NORMALIZED, COLD FIN, 1IN,
AMS-S-6758 COND.D KG ++
38 ++ D SAE 4130 NORM 1IN M BAR RD, LOW ALLOY STEEL, SAE 4130, NORMALIZED, COLD FIN, 1IN, ASTM A-29 LB ++
39 ++ D SAE 4130 NORM 2-1/4IN BAR RD, LOW ALLOY STEEL, SAE 4130, NORMALIZED, COLD FIN, 2.1/4IN,
AMS-S-6758 COND.D LB ++
41 ++ D SAE 4130 NORM 2.3/8 BAR RD, LOW ALLOY STEEL, SAE 4130, NORMALIZED, COLD FIN, 2.3/8IN,
AMS-S-6758 COND.D LB ++
42 ++ D SAE 4130 NORM 2IN BAR RD, LOW ALLOY STEEL, SAE 4130, NORMALIZED, COLD FIN, 2IN,
AMS-S-6758 COND.D LB ++
43 ++ D SAE 4130 NORM 3/4IN M BAR RD, LOW ALLOY STEEL, SAE 4130, NORMALIZED, COLD FIN, 3/4IN,
ASTM A-29 LB ++
45 ++ D SAE 4130 NORM 50MM BAR RD, LOW ALLOY STEEL, SAE 4130, NORMALIZED, COLD FIN, 50MM,
AMS-S-6758 COND.D LB ++
47 ++ D SAE 4130 NORM 7/8IN M BAR RD, LOW ALLOY STEEL, SAE 4130, NORMALIZED, COLD FIN, 7/8IN.ASTM A-29 KG ++
48 ++ D SAE 4330 XXX 1.1/4IN BAR RD, LOW ALLOY STEEL, SAE 4330 CEM, ANNEALED, HOT FIN., 1.1/4IN,
AMS 6411E LB ++
49 ++ D SAE 4330 CEM XXX 1.1/2IN BAR RD, LOW ALLOY STEEL, SAE 4330 CEM, ANNEALED, HOT FIN., 1.1/2IN,
AMS 6411E LB ++
50 ++ D SAE 4330 CEM XXX 2.1/2IN BAR RD, LOW ALLOY STEEL, SAE 4330 CEM, ANNEALED, HOT FIN, 2.1/2IN,
AMS 6411E LB ++
51 ++ D SAE 4330 CEM XXX 2.1/4IN BAR RD, LOW ALLOY STEEL, SAE 4330 CEM, ANNEALED, HOT FIN, 2.1/4IN,
AMS 6411E LB ++
52 ++ D SAE 4330 CEM XXX 2.3/4IN BAR RD, LOW ALLOY STEEL, SAE 4330 CEM, ANNEALED, HOT FIN, 2.3/4IN,
AMS 6411E LB ++
53 ++ D SAE 4330 CEM XXX 2IN BAR RD, LOW ALLOY STEEL, SAE 4330 CEM, ANNEALED, HOT FIN., 2IN, AMS 6411E LB ++
54 ++ D SAE 4330 MOD 2IN X XXX XX, XXX XXXXX XXXXX, XXX 0000 MOD, NORM & SBCR XXX, 0XX.XXX 7-122D LB ++
55 ++ D SAE 4330 MOD 3.1/4IN X XXX XX, XXX XXXXX XXXXX, XXX 0000 MOD, NORM & SBCR XXX, 3.1/4IN,
BMS 7-122D LB ++
56 ++ D SAE 4340 ANN1.1/2IN M BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEALED, HOT FIN., 1.1/21N, AMS 6415P LB ++
58 ++ D SAE 4340 ANN1.1/8INM2 BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEALED, HOT FIN., 1.1/8IN, AMS 6415P LB ++
60 ++ D SAE 4340 XXX 1.7/8IN X XXX XX, XXX XXXXX XXXXX, XXX 0000, ANNEALED, 1.7/8IN, AMS 6415P LB ++
61 ++ D SAE 4340 XXX 1,7/8IN M2 BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEALED, 1.7/8IN, DMS 1555H LB ++
62 ++ D SAE 4340 XXX 1/2IN M BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEALED, HOT FIN., 1/2IN, AMS 6415P LB ++
63 ++ D SAE 4340 XXX 1/2IN M1 BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEALED, COLD FIN., 1/2IN, AMS 6415P LB ++
64 ++ D SAE 4340 XXX 130MM X XXX XX, XXX XXXXX XXXXX, XXX 0000, ANNEALED, 130MM, ASTM A-29 LB ++
65 ++ D SAE 4340 XXX 150MM X XXX XX, XXX XXXXX XXXXX, XXX 0000, ANNEALED, 150MM, ASTM A-29 LB ++
66 ++ D SAE 4340 XXX 170MM M BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEALED, COLD FIN, 170MM, ASTM A-29 LB ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 1 of 2
CONFIDENTIAL
IAI - ISRAEL AIRCRAFT INDUSTRIES LTD. EXHIBIT 1 - LIST OF MATERIALS AND PRICES SCOPE - METAL TRADING TECHNICAL SERVICES LTD.
BASE
IAI CAT. PRICE
# No. P/N DESCRIPTION UOM [$/LB]
--- --------- --------------------------- -------------------------------------------------------------------------- --- ------
68 ++ D SAE 4340 XXX 1IN M BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEALED, COLD FIN, 1IN, ASTM A-29 LB ++
69 ++ D SAE 4340 XXX 1IN M1 BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEALED, HOT FIN., 1IN, AMS 6415P LB ++
71 ++ D SAE 4340 XXX 2.1/4IN M1 BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEAL ED, HOT FIN., 2.1/4IN, AMS 6415P LB ++
72 ++ D SAE 4340 XXX 2.1/8IN M BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEAL ED, HOT FIN., 2.1/8IN, AMS 6415P LB ++
73 ++ D SAE 4340 XXX 2.3/4IN M1 BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEALED, HOT FIN., 2.3/4IN, AMS 6415P LB ++
75 ++ D SAE 4340 XXX 205MM BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEALED, 205MM,ASTM A-29 LB ++
76 ++ D SAE 4340 XXX 20MM X XXX XX, XXX XXXXX XXXXX, XXX 0000, ANNEALED, 20MM,ASTM A-29 LB ++
77 ++ D SAE 4340 XXX 25MM X XXX XX, XXX XXXXX XXXXX, XXX 0000, ANNEALED, 25MM,ASTM A-29 LB ++
78 ++ D SAE 4340 XXX 2IN X XXX XX, XXX XXXXX XXXXX, XXX 0000, ANNEALED, HOT FIN., 2IN, AMS, 6415P LB ++
80 ++ D SAE 4340 XXX 3.14IN X XXX XX, XXX XXXXX XXXXX, XXX 0000, ANNEALED, HOT FIN., 3.1/4IN, AMS6415P LB ++
81 ++ D SAE 4340 XXX 3.1/8IN X XXX XX, XXX XXXXX XXXXX, XXX 0000, ANNEALED, HOT FIN., 3.1/8IN, AMS 6415P LB ++
82 ++ D SAE 4340 XXX 3/4IN M BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEALED, HOT FIN., 3/4IN, AMS 6415P LB ++
83 ++ D SAE 4340 XXX 30M X0 XXX XX, XXX XXXXX XXXXX, XXX 0000, ANNEALED, 30MM, ASTM A-29 LB ++
85 ++ D SAE 4340 XXX 40MM X XXX XX, XXX XXXXX XXXXX, XXX 0000, ANNEALED, 40MM, ASTM A-29 LB ++
87 ++ D SAE 4340 XXX 5/8IN X XXX XX, XXX XXXXX XXXXX, XXX 0000, ANNEALED, 5/8IN, ASTM A-29 LB ++
88 ++ D SAE 4340 XXX 5/8IN M1 BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEALED, HOT FIN., 5/8IN, AMS 6415P LB ++
89 ++ D SAE 4340 XXX 50MM X XXX XX, XXX XXXXX XXXXX, XXX 0000, ANNEALED, 50MM, ASTM A-29 LB ++
90 ++ D SAE 4340 XXX 5IN M2 BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEALED, HOT FIN., 5IN, AM S 6415P LB ++
92 ++ D SAE 4340 XXX 65MM X XXX XX, XXX XXXXX XXXXX, XXX 0000, ANNEALED, 65MM, ASTM A-29 KG ++
93 ++ D SAE 4340 XXX 7/8IN M BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEAL ED, COLD FIN, 7/8IN, ASTM A-29 LB ++
94 ++ D SAE 4340 XXX 7/8IN M1 BAR RD, LOW ALLOY STEEL, SAE 4340, ANNEALED, HOT FIN., 7/8IN, AMS 6415P LB ++
95 ++ D SAE 4340 XXX 70MM X XXX XX, XXX XXXXX XXXXX, XXX 0000, ANNEALED, 70MM, ASTWI A-29 KG ++
96 ++ D SAE 4340 HT 25MWI BAR RD, LOW ALLOY STEEL, SAE 4340, H+T TO 000XXX XXX, XXXX XXX, 00XX,
XXX-X-0000 COND F LB ++
97 ++ D SAE 4340 HT 70MM BAR RD, LOW ALLOY STEEL, SAE 4340, H+T, 70MM, ASTM A-29 LB ++
98 ++ D SAE 4340 NOR-TEMP 1,5IN BAR RD, LOW ALLOY STEEL, SAE 4340, NORMALIZED & TEMP, 1.1/2IN, AMS 6484A LB ++
99 ++ D SAE 4340 NOR 3.1/2IN X XXX XX, XXX XXXXX XXXXX, XXX 0000, NORMALIZED, 3.1/2IN, BMS7-28G+BAC5617 LB ++
100 ++ D SAE 4340 NORM-TEMP 2IN BAR RD, LOW ALLOY STEEL, SAE 4340, NORMALIZED & TEMP, 2IN, AMS 6484A LB ++
102 ++ D SAE 4340 NORM-TEMP 4IN BAR RD, LOW ALLOY STEEL, SAE 4340, NORMALIZED & TEMP, 4IN, AMS 6484A KG ++
103 ++ D SAE 4340 NORM-TEMP 0/0 XXX XX, XXX XXXXX XXXXX, XXX 0000, NORMALIZED & TEMP, 5/8IN, AMS 6484A LB ++
104 ++ D SAE 4340 NORM 1 7/8IN BAR RD, LOW ALLOY STEEL, SAE 4340, NORMALIZED, HOT RLD, 1.875IN, SAE
AMS-S-5000 COND D KG ++
105 ++ D SAE 4340 NORM 2.5/8 X0 XXX XX, XXX XXXXX XXXXX, XXX 0000, NORMALIZED, 2.5/8IN, ASTM A-29 KG ++
106 ++ D SAE 4340 NORM 5IN BAR RD, LOW ALLOY STEEL, SAE 4340, NORMALIZED,HOT RLD, 5IN, SAE
AMS-S-5000 COND D LB ++
107 ++ D SAE 4340 NORM 7/8IN BAR RD, LOW ALLOY STEEL, SAE 4340, NORMALIZED,HOT RLD, 7/8lN, SAE
AMS-S-5000 COND D KG ++
108 ++ D SAE 4340 NRM-TEMP 3.7/8 BAR RD, LOW ALLOY STEEL, SAE 4340, NORMALIZED & TEMP, 3.7/8IN, AMS 6484A LB ++
109 ++ D SAE 4340 CER XXX 1IN BAR RD, LOW ALLOY STEEL, SAE 4340 CER, ANNEALED, COLD FIN., 1IN,
AMS 6414H LB ++
110 ++ D SAE 4340 CER XXX 3.1/2IN BAR RD, LOW ALLOY STEEL, SAE 4340 CER, ANNEALED, COLD FIN., 3.1/2IN,
AMS 6414H LB ++
111 ++ D SAE 4340 CER XXX 7/8IN BAR RD, LOW ALLOY STEEL, SAE 4340 CER, ANNEALED, COLD FIN., 7/8IN,
AMS 6414H LB ++
112 ++ D SAE 4340 MOD XXX 4.3/8IN BAR RD, LOW ALLOY STEEL, SAE 4340 CER, NORM&SBCR XXX, 4.3/8IN, BMS 7-26L LB ++
113 ++ D SAE 4340 MOD N&SCA 7/8IN JAR RD, LOW ALLOY STEEL, SAE 4340 CER, NORM&SBCR XXX, COLD FIN, 7/8IN,
BMS 7-26L LB ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Page 2 of 2
CONFIDENTIAL
SUPPLY AGREEMENT
FOR
MATERIAL
EXHIBIT 2
QUALITY PLAN
Ex. 2 - 1
CONFIDENTIAL
SUPPLY AGREEMENT
FOR
MATERIALS
Annexes to Exhibit 2
o IAI P.S. 850100 Rev C
o Lab tests Pricelist
CONFIDENTIAL
++
[REMAINING PAGES OF EXHIBIT REDACTED]
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
CONFIDENTIAL
SUPPLY AGREEMENT
FOR
MATERIAL
EXHIBIT 3
SUPPLIER SERVICE FEES
EX. 3 - 1
CONFIDENTIAL
TABLE OF AGREED SERVICE FEES
IAI OPTIONAL SERVICES
-------------------------------
STORAGE
SERVICE -
PARTIAL FEE -
FULL SERVICE - SERVICE - ($/METER(2)) UP OTHER
FEE (% OF FEE (% OF TO A HEIGHT SERVICES
BASE PRICE) BASE PRICE) OF 2 METER SERVICE - FEE
FROM CIF FROM CIF ($/PER OTHER
MATERIAL TYPE SHAPE PRICES PRICES MONTH) SERVICES REMARKS
-------------------------------------------------------------------------------------------------------
ALUMINIUM Plates
Sheet ** ++ ++ ++ ++ **
2XXX, 6061, Bars ++ ++ ++ ++
7XXX Tubes ++ ++ ++ ++
Extrusions ++ ++ ++ ++
-------------------------------------------------------------------------------------------------------
STAINLESS STEEL Plates
Sheet ** ++ ++ ++ ++ **
Bars ++ ++ ++ ++
Tubes ++ ++ ++ ++
-------------------------------------------------------------------------------------------------------
LOW ALLOY STEEL Plates ++ ++ ++ ++
Bars ++ ++ ++ ++
-------------------------------------------------------------------------------------------------------
COLOURED METAL Plates ++ ++ ++ ++
Sheet ** ++ ++ ++ ++ **
Bars ++ ++ ++ ++
-------------------------------------------------------------------------------------------------------
NOTES AND EXPLANATIONS
----------------------
++ - ++
- ++
++ - ++
- ++
* = Plus cutting charges (as per the attached price list - 20%)
** = Cutting charge (whole sheet value incl. remainders)
++ Discount
a. Every Material Type and Shape, as listed on the table above, other
than Aluminium Plates and Sheet, shall be discounted at ++ for all IAI
PO lines above ++
b. The quantities of each line item with the same IAI Catalogue Number on
each IAI PO, shall be added together for the purpose of determining
the applicable discount rate.
Ex. 3 - 2
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
CONFIDENTIAL
This list of Services is per Paragraph 5 of the Agreement (repeated here for
convenience only):
"The following are the lists of the types of Services to be provided by Supplier
to IAI, after purchasing the Materials from IAI Approved Sources
1. List of Full Service
1.1. Shipping to the FSL
1.2. Storage of Material at the FSL
1.3. Receiving inspection at the FSL
1.3.1.Including Lab testing as needed, at IAI laboratories
1.4. Cutting to size / length per given dimensions and / or sketches
provided(1)
1.5. Signing quality documents and Route Cards
1.6. Shipping in Israel to the IAI receiving dock / production floor/IAI
sub contractors
2. List of Partial Services
2.1 Same as the list of Full Services in Article 1 above except for
cutting to size / length
3. List Of Optional Services - applicable to IAI furnished Material
3.1. Storage of IAI Material
3.2. Other Services
3.2.1. Cutting to size (2)/ length per given dimensions and / or
sketches provided
3.2.2. Signing quality documents and Route Cards
3.2.3. Shipping in Israel to the IAI receiving dock / production
floor/IAI sub contractors"
--------------
(1) Cutting methods to include capability of Laser cutting and water jet
curling using data provided by magnetic media.
(2) IAI intends to drop ship at Bidder's FSL sheet metals with large sizes (96'
width) to be cut to size by the Supplier. This requires special equipment
such as lifting devices and large cutting equipment.
Ex. 3 - 3
CONFIDENTIAL
PRICELIST FOR CUTTING MATERIAL - PLATES
16.05.04
Price for Cutting Speed of Cutting Thickness
per Meter in Dollars (Millimeters per minute) in Millimeters Type of Alloy
--------------------------------------------------------------------------------
++ 260 10-200 Aluminum
++ 200 200-400
++ 24 10-50 15-5PH
++ 15 50-100 17-4PH
++ 10 100-150 H-13
++ 7 150-200 D2
++ 5.5 200-250
++ 31 10-50 316
++ 20 50-100 01 Oil
++ 14 100-150 Shaswax
++ 11 150-200 1.2083
++ 9 200-250 Copper
++ 7 250-300
++ 42 10-50 303-304
++ 27 50-100 1.2316
++ 19 100-150 1.2312
++ 15 150-200 C45
++ 12 200-250 ST37
++ 10 250-300 41,304,340
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
EX. 3 - 4
CONFIDENTIAL
PRICELIST FOR CUTTING MATERIAL - BARS
16/05/2004
303, 303, 440 C,
SE, 416, 17-4PH,
410, 42, 0, 1045, C-276, C - 15 -
12 L 14, 4130, 22, C 20, 5PH, 13
Plastic BRONZE 304 316 310 4340 Titanium DUPLEX - BMO Aluminum Size
----------------------------------------------------------------------------------------------------------
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ ++ ++ ++ ++ ++ ++ ++ ++ ++ ++
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
Ex. 3 - 5
CONFIDENTIAL
SUPPLY AGREEMENT
FOR
MATERIAL
EXHIBIT 4
OPTION FOR IAI PROVIDED MATERIALS
Ex 4 - 1
CONFIDENTIAL
OPTION FOR IAI PROVIDED MATERIALS
1. INTRODUCTION
1.1 A Participating Division (the "IAI Division") may, upon 30 days written
notice to Supplier, exercise this Exhibit 4 option (Option for Stocking IAI
Materials at Supplier FSL), and elect to supply Supplier with certain
Materials (collectively, "IAI Provided Materials" or "IPM Materials").
Supplier shall accept and retrieve such IPM Materials from IAI's facility,
as directed by IAI, and, Supplier shall monitor and manage the inventory of
such IPM Materials pursuant to the terms of exhibit 6 and deliver such IPM
Materials back to the IAI Divisions as instructed from time to time.
1.2 The Division exercising the option shall provide a detailed list of the
Materials it wishes to transfer to the Supplier FSL including quantities.
The list shall also indicate what Materials are for IAI own usage and what
Materials are to be stocked and to be sold on the free market by the
Supplier, in prices and under terms to be decided between the Parties.
1.3 Thirty (30) days following the provision of such list by the Division, the
Division will commence the transfer its stock to the Supplier FSL. The
Materials for IAI own use shall be separated from other Materials stored by
the Supplier.
2. STORAGE OF IPM MATERIALS
After retrieval from IAI's facility, Supplier shall store all IPM Material
at the Supplier's FSL (the "Storage Location"). IPM Materials are to be
maintained at the Storage Location in accordance with the further
provisions contained herein and, except for redelivery to IAI pursuant to
the Agreement, are not to be withdrawn to another location without IAI'S
prior written approval/instruction.
3. OTHER IPM MATERIAL SERVICES
IAI shall have the option of requiring the following additional Other
Services regarding the IPM Material:
(a) Cutting to size / length per given dimensions and / or sketches
provided.
(b) Signing quality documents and Route Cards.
(c) Shipping in Israel to the IAI receiving dock / production
floor/IAI sub contractors.
4. TITLE TO IPM MATERIALS
Title to IPM Materials shall at all times remain vested in IAI. Supplier
shall not permit or suffer any lien, claim, mortgage or encumbrance to
attach to IPM Materials. Supplier will only have the right to utilize the
IPM Materials for purposes set forth herein, and, unless expressly stated
herein, nothing contained herein is intended or will be interpreted as
granting to Supplier any right, title or interest in the IPM Materials,
whether legal or equitable.
5. INVENTORY VERIFICATION
Ex 4 - 2
CONFIDENTIAL
5.1. The actual quantity of Materials in the IPM Inventory may be verified prior
to the transfer of the IPM Inventory to Supplier in accordance with the
physical inventory counting described in 4.2 below.
5.2. Inventory Counting Method: As part of the transfer to Supplier's FSL,
Supplier may conduct, at no charge to IAI, a physical inventory count of
the total IPM Materials, to verify the accuracy of the IAI inventory
records.
5.3. Physical Inventory and storage
IAI and Supplier will agree in writing on the results of the physical
inventory count prior to Supplier's acceptance of any IPM Materials.
Supplier will store all IPM Materials at the FSL in a segregated area and
shall not commingle IPM Materials with any other Materials, equipment or
personal property of any other person or entity. This segregated area will
be identified with a sign stating "IAI Owned Goods, owned by Israel
Aircraft Industries. In addition, IAI's identification tags shall be
attached to IPM Materials while at the FSL. Said separate area will be
adequate for warehousing and storing IPM Materials delivered from IAI to
Supplier. Supplier will use the same degree of care in keeping records of
and maintaining security for IPM Materials as Supplier uses with respect to
its own, or other customers' inventory (and in no event less than
reasonable care) and will keep IPM Materials free and clear of all Liens
arising through Supplier or out of or in connection with Supplier's
possession thereof. Supplier shall complete documentation as required by
Israeli law or otherwise reasonably required by IAI to properly record
IAI's ownership and /or security interest in the Inventory, including,
financing statements, fixed and/or floating charges, and/or FAA filings, as
applicable, and Supplier will provide assistance to IAI, as reasonably
requested by IAI, in completing such other documentation which may be
required, if any, to ensure proper recordation of IAI's ownership interests
in the IPM Materials. Supplier will be responsible for any loss or damage
from any cause whatsoever to the Inventory during the Term.
5.4. In the event the IPM Inventory is returned to IAI as the result of
expiration or termination of this Agreement, the same physical inventory
counting described above shall be used prior to the transfer of the IPM
Inventory from Supplier back to IAI.
6. IAI INSPECTION
6.1. Without the requirement of notice by IAI, and at any time, IAI has the
right at IAI's own expense to enter any premises where any IPM Materials
are located and to conduct inventory and records examinations of the
Inventory. Supplier shall provide reasonable cooperation and personnel for
such IPM Materials and records examinations at no cost to IAI. Payment by
Supplier to IAI for such loss or damage to IPM Materials shall be limited
to the replacement cost of the IPM Materials. Supplier shall be responsible
for insuring IPM Materials against all loss or injury.
6.2. In the event any IPM Materials are determined to be missing, damaged or not
otherwise in the condition required by this Agreement, IAI shall file a
claim within thirty (30) days after discovery of the loss or damage.
Supplier will provide its acceptance or rejection of the claim within
fourteen (14) days of receipt of the claim. Supplier will pay IAI net 45
days after the acceptance date of the claim for such IPM Materials limited
to the replacement cost of the lost or damaged Material.
7. SUPPLIER REPORTS
Ex 4 - 3
CONFIDENTIAL
Supplier will furnish IAI with two reports in both hard copy and magnetic
media/E-mail format, on the second (2nd) day of every month, which sets
forth the following information for the IPD Materials, as follows:
7.1. Report of IPM Materials balance as of end of every second month
1. Material part number;
2. IAI Catalogue number;
3. Units of measurement;
4. Quantity of balance in the Storage Location;
5. IAI unit price as per the Agreement in U.S. dollars.
6. The extended value of the balance of the IPM Materials per item at
Supplier FSL.
7.2. Report of IPM Materials transactions in the previous month
IAI will be provided a monthly billing report file, which will show IPM
Materials stock that was delivered to IAI that month at zero base price.
1. Material part number;
2. IAI Catalogue number;
3. Unit of Measurement;
4. Type of transaction affecting such IPM Materials (transfer to ____
Division);
5. Date of the transaction;
6. Quantity of IPM Material in the transaction;
8. STANDARD OF HANDLING
8.1. During the term of this Agreement and any extension thereto, Supplier will
handle the IPM Materials in the normal Supplier manner, consistent with
prudent industry standards, and in accordance with the provisions of
appropriate technical manuals.
8.2. During the term of this Agreement and any extension thereto, Supplier will
manage the IPM Materials with the same inventory management system used by
Supplier for the other Materials covered by the Agreement.
9. QUALITY
9.1. IPM Materials shall be provided by IAI to Supplier with serviceability
tags. Certain IPM Materials that IAI supplies to Supplier may, at the time
of transfer to Supplier, not necessarily comply with the Agreement's
Quality Plan. In such cases Supplier shall be released from compliance with
the terms of the Quality Plan.
10. INVOICING AND PAYMENT
9.1. Supplier shall invoice the IAI Division for Storage Services an agreed
Service Fee, as per Exhibit 3 to this Agreement. The IAI Division shall be
invoiced once a year for the preceding year.
Ex. 4 - 4
CONFIDENTIAL
9.2. Supplier shall invoice the IAI Division for Other Services provided for the
IPM Material. Invoicing shall be at the agreed Service Fee, as per Exhibit
3 to this Agreement. The IAI Division shall be invoiced per each shipment.
9.3. The relevant Service Fee(s) shall be the sole payment due to Supplier for
IPM Materials delivered, and Services rendered, under this IPM Option.
9.4. The Terms of payment shall be the same as those described in Article 10 in
the Agreement
11. INSURANCE
11.1. Supplier shall keep in force and effect the insurance coverage described
in Article 18 of this Agreement.
12. TERMINATION
A Division may terminate an IPM Program, in whole or in part, for any
reason, upon ninety (90) days prior written notice. Further, all IPM
Programs will automatically terminate upon termination of the Agreement or,
in the case of one-time supplies by IAI of IPM Materials, upon the
depletion of said Materials.
Upon termination of an IPM Program for any reason, Supplier will promptly
return all IPM Materials in its possession to IAI, and shall assist IAI in
such process by providing IAI with all relevant inventory records, as well
as access to the Storage Location. IAI will bear all cost of packaging,
transportation, insurance and duties, in such case where termination is due
to reasons other than due to Supplier's default.
Ex. 4 - 5
CONFIDENTIAL
SUPPLY AGREEMENT
FOR
MATERIALS
EXHIBIT 5
IAI STANDARD TERMS AND CONDITIONS
Ex. 5 - 1
CONFIDENTIAL
EXHIBIT 5
ISRAEL AIRCRAFT INDUSTRIES LTD.
("IAI") STANDARD PURCHASE ORDER TERMS AND CONDITIONS
I AGREEMENT
This order contains the entire Agreement between IAI and Seller and is
not subject to variation, irrespective of the wording of Seller's
acceptance, without the prior written agreement by IAI. Any additional or
different terms of Seller's acceptance are hereby expressly rejected. This
order becomes a binding order including all terms and conditions contained
herein and/or contained in documents attached hereto as specified, when it
is accepted by the Seller, either by acknowledgement or the commencement of
performance hereof.
II INSPECTION, ACCEPTANCE AND REJECTION
(A) All goods to be delivered and services to be performed hereunder shall
be subject to inspection. Surveillance and test at all times and
places, including the period and place of manufacture or performance,
by IAI (and by (the United States Government [the "Government"], if
this order is placed under a Government contract or subcontract).
(B) Seller and Seller's subcontractors shall provide and maintain an
inspection system acceptable to IAI and, where applicable, the
Government. Representatives of IAI and Government inspectors, if any,
shall have access to all areas on the premises of the Seller, or of
Seller's subcontractor, in which work on this order is being
performed. Seller, and Seller's subcontractors, shall provide all
reasonable facilities for the safety and convenience of the
inspectors. Seller shall furnish to the inspectors all information and
data as may reasonably be required to perform their inspections. All
goods to be delivered hereunder shall be subject to final inspection,
test and acceptance by IAI at destination in Israel, notwithstanding
any payment or inspection at source IAI shall accept or give notice of
rejection of goods delivered and services performed within ninety (90)
days after receipt of such goods or completion of such services. No
inspection of goods or work by IAI prior to acceptance shall release
Seller of its responsibility for any nonconformity. Acceptance by IAI
shall not waive any rights that IAI and/or (the Government, if
applicable, might otherwise have at law or under Article IV entitled
"Warranty", or by express reservation in this order with respect to
any nonconformity.
(C) In the event of any tender of goods or services which is
nonconforming, IAI shall be entitled to all remedies as provided by
law, and in addition thereto shall have the right to do any or all of
the following: (i) to hold nonconforming goods for a reasonable period
pending a determination to accept or reject any or all thereof; (ii)
to return nonconforming goods to Seller for replacement or correction
AS IAI may elect; (iii) to accept nonconforming goods and services
subject to an equitable price reduction; (iv) to replace or correct
nonconforming goods and services and charge to Seller the cost
occasioned to IAI thereby, (v) to require Seller to correct
nonconforming services at no increase in the price of this contract;
(vi) to recover any and all expenses, costs, price reductions and
damages paid, incurred, or suffered by IAI as a result of such
holding, return. Replacement, correction, reductions, or rejections of
nonconforming goods and services; or (vii) to terminate this order as
provided in Article VIII hereof.
III QUALITY CONTROL
Seller shall provide and maintain a quality control system, which shall be
in accordance with the then current state of the art and shall meet the
highest quality control standards in the respective industry. Seller shall
permit IAI and, where applicable, the Government to review its procedures,
practices, processes and other documents related to its quality control
system.
IV WARRANTY
(A) Seller warrants that all goods and services furnished hereunder will
conform to the requirement of this contract (including all
descriptions, specifications and drawings made a part of this order)
and such goods will be merchantable, fit for their intended purposes,
free from all defects in materials and workmanship and, in the extent
not manufactured pursuant to detailed designs furnished by IAI, free
from defects in design. IAI's approval of designs or specifications
furnished by Seller shall not relieve Seller of its obligations under
this warranty.
(B) Except as may be otherwise provided in the specifications applicable
to this order or other documents incorporated herein by reference,
these warranties shall remain in effect for the period of one (1) year
from delivery to IAI. If the goods or the results of services to be
provided hereunder are incorporated by IAI in items for resale by IAI,
said one (1) year period shall begin as of the date of IAI's delivery
of any such resale items to its customers. Goods and services
corrected or replaced by Seller shall be subject to all of the
provisions of this order in the manner and to the extent as goods and
services originally furnished hereunder.
(C) The above warranties shall not apply if the non-conformity/defect is
attributable to a failure to preserve, store, install, operate, or
maintain the goods in accordance with seller's written instructions
furnished to IAI.
(D) The aforesaid express warranties shall be in addition to any standard
warranty or guarantee of Seller and Any warranties otherwise created
by operation of law or contract. All warranties and guarantees shall
run to IAI and IAI'S customers including, where applicable, the
Government ("IAI's Customers").
V DELIVERY, SHIPPING AND PACKING
(A) It is agreed that time is of the essence in the performance of this
order Deliveries shall be in accordance with the schedule and
quantities at specified in this order, and Seller shall strictly
adhere to the delivery and completion schedules specified herein. If,
at any time, Seller believes it may be unable to comply with the
delivery or completion schedules, Seller shall immediately notify IAI
in writing of the probable length of any anticipated delay any the
reasons for it, and shall continue to notify IAI of any material
change in the situation. In the event of such notification or of an
actual failure by Seller to comply with the delivery or completion
schedules, IAI may, in addition to all other remedies, require Seller,
at Seller's expense, to ship goods via air freight or expedited
routing to avoid or minimize delay. In the event of early delivery,
IAI may store goods at Seller's expense. Unless otherwise agreed in
writing, Seller shall not make material commitment, or production
arrangements in excess of the amount or in advance of the time
reasonably required to meet IAI's delivery schedule. Seller shall not
ship goods to arrive at IAI's plant earlier than two (2) weeks in
advance of the specified schedule unless authorized in writing by IAI.
At IAI's option, any such deliveries may be returned to Seller at
Seller's expense or payment deferred to the date payment would become
due according to this specified schedule.
(B) All goods to be supplied by Seller hereunder shall be shipped to IAI,
at the point designated in this order. Unless otherwise set forth in
this order, INCOTERMS 1990 shall be applicable to this order.
(c) All goods shall be packed in accordance with best commercial practice
to prevent damage or deterioration and secure lowest transportation
rates, in shipping containers (unless otherwise provided in this
order) provided by Seller which are suitable for protection of said
goods during shipment to and storage in Israel. No charges will be
paid by IAI for preparation, packing, crating or shipment unless so
stated in this order.
Each container shall be marked with IAI's Purchase Order Number
Each container of a multiple container shipment shall be identified
(i) to show the number of the container and the total number of
containers in the shipment; and (ii) the number of the container in
which the packing list has been enclosed. IAI shipments by Seller must
include in a conspicuous and easily accessible place on the inside of
the shipping container packing list, containing IAI's Purchase Order
Number, quantity, pan number/size, description of the goods shipped
and appropriate evidence of inspection, including acceptance test
reports, material test certificates, certificates of conformance
and/or serviceability tags. In addition, a duplicate set of the
aforementioned documentation shall be in a conspicuous and easily
accessible place on the outside of the shipping container.
VI CHANGES
IAI may, at any time, exclusively by a written order signed by its
authorized representative, and without notice to sureties, make changes
within the general scope of this contract which affect the (i) drawings,
designs, or specifications, (ii) description of services to be performed;
(iii) methods of shipment or packing; (iv) place of inspection, delivery or
acceptance; (v) delivery/performance schedules, (vi) data requirement, or
(vii) quality of items to be delivered, and Seller shall comply therewith.
Should any change cause an increase or decrease in the cost of, or the
time required for performance of this order, an equitable adjustment shall
be made with respect to the order and the order shall be modified in
writing accordingly. Any claim by Seller for adjustment under this article
must be asserted in writing to IAI not later than ten (10) days after the
date of receipt by Seller of the written change authorization or within
such extension as IAI may grant in writing IAI may, in its sole discretion,
consider any such claim regardless of when asserted. Such claim shall be in
the form of a complete change proposal fully supported by factual
information. Pending any such adjustment, Seller will diligently proceed
with the contract as modified. Where the cost of property made excess or
obsolete as a result of a change is included in Seller's claim for
adjustment, IAI shall have the right to direct the manner of disposition of
such property. IAI shall have the right to examine any of Seller's
pertinent books and records for the purpose of verifying Seller's claim.
IAI and Seller agree that there shall be no adjustment in the price or
time for performance hereunder unless IAI shall have directed a change
thereto by the issuance of a written notice as provided by this
clause. Seller shall advise IAI in writing if Seller receives from any
source other than the written notice referred to in the- preceding
sentence any notification, which Seller regards as a change to this
order. Seller shall provide such advice, in writing, no later than
five (5) working days from receipt of any such notification, and prior
to taking any action in accordance therewith. If this order is placed
under a Government Contract or subcontract, the provisions of FAR
52.243-7, "Notification of Changes", shall apply.
PRICES, TAXES, INVOICE AND PAYMENT
(A) The prices stated in this order are firm fixed prices and are stated
in U.S. Dollars, unless otherwise specified in this order.
(B) Unless otherwise specified in this order. Seller shall pay all taxes
and import or export or other duties of any kind of Seller's country,
including those taxes or duties that may be imposed or assessed on any
IAI furnished property (data, information, materials, parts,
components or tooling). All such taxes and duties, existing, new or
increased, are included in the prices stated in this order.
(C) For each shipment of goods or completed item of services Seller shall
submit an original invoice marked "original" and two copies marked
"copy" to IAI. Taxes and duties must be separately itemized. Purchase
order numbers must appear on all shipping documents, invoices, quality
certifications, and packing lists. Together with each invoice, Seller
shall deliver a copy of all appropriate evidence of inspection of the
goods, including, without limitation, acceptance test reports,
material test certificates and certificates of conformance.
(D) Determination of payment due date, whether under net or discount
terms, will be based on the latest of (i) the date goods are received
or services arc completed; (ii) the date goods are scheduled to be
shipped/received or services are scheduled for completion under this
order, or (iii) the date an accurate invoice is received.
VIII TERMINATION/CANCELLATION/STOP WORK
(A) Termination Convenience
IAI may terminate this order for its convenience in whole or, from
time to time, in part in accordance with the clause entitled "Termination
for the Convenience of this Government set forth in FAR 52.249-2, which
clause is incorporated herein by this reference, except: "Contractor" shall
mean Seller and "Government" and "Contraction Officer" shall mean IAI:
delete (c); in (d) insert "6 months" in lieu of "1 year"; and in (k) insert
"45 days" in lieu of "90 days".
(B) Termination-Default
This order may be terminal, in whole or from to time, in part by IAI
for default in accordance with the "Default" clause in FAR 52.249-8, which
is incorporated herein by reference, except "Government" and "Conducting
Officer" in all paragraphs
Ex. 5 - 2
CONFIDENTIAL
other than (c) means IAI, "Contractor" means Seller and the reference to a
Dispute Clause refers to Article XX hereof.
(C) Termination/Cancellation-Other
By written, notice to Seller, IAI may cancel this order, in whole or,
from time to time, in part, in the event of suspension of Seller's
business, insolvency of Seller, institution of bankruptcy, reorganization,
arrangement or liquidation proceedings by or against Seller, appointment of
a trustee or receiver for Seller's property or business or any assignment
by Seller for the benefit of creditors. Such cancellation shall be deemed
"for default" in accordance with paragraph VIII(B) hereof and the rights
and obligations of the parties shall be determined as therein provided.
(D) Stop Work
IAI may, by written notice to Seller, require the Seller to stop for a
period not to exceed ninety (90) days all or any part of the work called
for by this order in accordance with the "Stop Work Order" clause in PAR 52
242-15, which is Incorporated herein by reference, except: "Government and
"Contracting Officer" means IAI and "Contractor" means Seller as used
therein, and in (b)(2) insert "20 days" in lieu of "30 days".
IX IAI PROPERTY
Seller shall keep all tools, fixtures, jigs, material and/other
equipment (collectively "property") furnished by IAI and all property, to
which IAI or the Government, if applicable, acquires title by virtue of
this order, segregated and clearly marked and will maintain a complete
inventory thereof. Title and right of immediate possession of all such
property shall remain vested in IAI/the Government. The property shall be
maintained and replaced, if necessary, by Seller at no additional cost to
IAl/the Government. Seller assumes all risk of loss, destruction or damage
to such property while in Seller's custody or control. Seller will
immediately notify IAI in writing of any such loss, destruction or damage.
Upon termination or completion of this contract, Seller will deliver such
property, as directed by IAI, in good condition subject to ordinary wear
and tear and normal manufacturing losses.
X SPECIAL TOOLING
Except as may be otherwise provided for in this order, jigs, dies,
fixtures, molds, patterns special gauges, special test equipment and other
items of special tooling (collectively, the "special tooling") shall be
furnished by and at the expense of Seller. Such special tooling shall be
kept in good condition by the Seller and when necessary shall be replaced
by Seller all without expense to IAI. Title to such special tooling shall
remain with Seller, except that IAI may, at any time, reimburse Seller for
the negotiated price of all or part of such special tooling, and upon
payment therefor, shall become the owner thereof, entitled to possession at
the completion of this order, or such earlier date as the parties may
agree.
XI NON-D1SCLOSURE
Seller shall not, without the written consent of IAI, either during or
after the performance of the work required hereunder, use, other than for
such performance, or disclose to any person, other than a duly authorized
representative of IAI, any information, data, material or exhibit created,
developed, produced or otherwise obtained in the course of the work
required hereunder, or any information contained in reports, drawings,
documents or other records furnished to Seller by IAI. Seller further
agrees that it will not divulge any matter, the disclosure of which would
be detrimental to the interests of IAI. Nothing contained herein shall
prevent Seller from making proper use of its experience gained in the
performance of the work required hereunder. The restrictions of this clause
shall not apply to information in the prior possession of Seller or
acquired by Seller from a source other than IAI that has the right to
disclose such information to Seller, nor shall it limit any rights the
Government, if applicable, may have in such information.
XII PATENT, TRADEMARK, COPYRIGHT AND TRADE SECRET INDEMNITY
To the extent that the goods purchased under this order have not
originated with IAI, Seller agrees to indemnify and hold harmless IAI and
IAI's Customers against any expense, loss or liability for any actual or
alleged infringement of any patent, trademark, copyright, or trade secret
arising from or related to the use, sale, manufacture or disposal of such
goods. Upon receipt of timely notice of any claim or suit alleging such
infringement, Seller agrees to defend IAI and IAI's Customers at Seller's
expense. During the pendency of any such claim or suit, and (where
necessary) upon settlement thereof, Seller shall, at Seller's expense,
either (i) substitute fully equivalent, noninfringing goods or (ii) modify
the goods so that same no longer infringe but remain equivalent, or (iii)
obtain for IAI/IAI's Customers the right to continue use of the goods in
accordance with the terms of the order.
XIII SUBCONTRACTING
Seller will not subcontract, without IAI's prior written consent, for
the design, development or procurement of the whole or any substantial
portion of any goods ordered hereunder. This limitation shall not apply to
Seller's purchases of standard commercial supplies or raw material. IAI's
consent to any such subcontract shall not relieve Seller from any
obligation imposed by this order or impose on IAI any responsibility for
the work to be performed under such subcontract
Ex. 5 - 3
XIV NOTICE OF LABOR DISPUTES
(A) Whenever Seller has knowledge that any actual or potential labor
dispute is delaying or threatens to delay the timely performance of
this order. Seller shall immediately give IAI notice thereof and all
relevant information with respect thereto, and shall notify IAI of any
material changes in the information required hereunder.
(B) Seller agrees to insert the substance of this Article, including this
paragraph (R), in any subcontract hereunder wherein a labor dispute
may delay the timely performance of this contract.
XV BANK GUARANTEE/LETTER OF CREDIT AND PERFORMANCE BOND
(A) Bank Guarantee/Letter of Credit
Unless otherwise specified in this order, Seller shall, at Seller's
cost, furnish to IAI prior to and as a condition for payment by IAI of, any
advance payment to Seller under this order, an irrevocable bank guarantee
or letter of credit in the amount of the advance payment. The said bank
guarantee or letter of credit shall be issued by a first class bank
acceptable to IAI, shall remain in force until Seller has completed
performance of all of its obligations under this order and shall otherwise
be satisfactory in form and terms to IAI.
(B) Performance Bond
If indicated as required on, the face of this order. Seller shall, at
Seller's cost, furnish to IAI within fifteen (15) days from the date of
this order, a performance bond in an amount of ten percent (10%) of the
total order price. The said performance bond shall be issued by a first
class bank or insurance company acceptable to IAI, (shall remain in force
until Seller has completed performance of all of its obligations under this
order and shall otherwise be satisfactory in form and terms to IAI
XVI PRECEDENCE
In the event of any conflict between the clauses, attachments,
specifications or provisions which constitute this order, the following
order of precedence shall apply: (i) terms and conditions appearing on the
face of the order (ii) if this order is being placed under a Government
Prime Contract or subcontract, the Appendices entitled "Government Contract
Provisions", Certifications and Representations attached hereto; (iii) the
terms and conditions contained in these Standard Purchase Order Terms and
Conditions; (iv) specifications; (v) the drawings; (vi) the statement of
work; and (vii) all other attachments incorporated herein by reference.
All goods listed herein to which IAI's specifications are applicable
must comply with such specifications current as of the date of this order.
IAI's specifications shall prevail over any subsidiary documents referenced
therein.
XVII GRATUITIES AND CONTINGENCIES
(A) Seller agrees that in consideration of this order, neither Seller nor
any agent or representative of Seller has nor will pay any fees,
commissions, percentages, brokerage fees or other sums to persons
contingent upon or resulting from execution of this order nor has or
will Seller extend or offer any form of compensation or remuneration
to IAI's employees for the purposes of securing this order, or
obtaining favorable treatment with respect to Seller's performance of
this order.
(B) In the event of breach or violation of the agreements described in (A)
above, IAI shall have the right at its option to terminate this order
for default without liability, or at its option may deduct from
amounts that otherwise may be owed Seller (the full amount of any such
fees, commission, remuneration or other sum. Such rights and remedies
of IAI shall be in addition to any other rights and remedies provided
by law or under the terms of this order.
XVIII COMPLIANCE WITH LAWS AND EXPORT APPROVAL
(A) In the performance of this order. Seller shall comply with all
applicable statutes, rules, regulations and orders of Seller's country
and of any state or local authority or political subdivision thereof,
Seller shall indemnity, save harmless and defend IAI from and against
all losses, costs, fees and damages arising, directly or indirectly,
from any actual or alleged failure by Seller to comply with any of the
aforesaid statutes, rules, regulations and orders.
(B) Seller shall be responsible for and shall obtain all permits and
authorizations required for the export of the goods and services from
Seller's country to Israel.
XIX PRICE MOST FAVORED CUSTOMER
Seller warrants and represents that the price of the goods in this
order does not exceed the contract price for the same or similar goods, to
any other customer during the term of this order. If during the term of
this order, the Seller shall sell any goods of the kind in equivalent
quality or quantity described in this order, to any other customer at a
price, which is lower than the price then in effect under this order. Such
lower price shall thereafter apply on all goods shipped under this order so
long as said lower price shall remain in effect and the price of this order
shall be reduced accordingly and this order shall be modified to reflect
the reduction.
XX DISPUTES AND APPLICABLE LAW
This order shall be governed by and construed in accordance with the
laws of the State Israel, regardless of the places of execution or
performance of this order. Except as otherwise provided in the order, the
Seller may appeal any decision of IAI concerning an issue of law, fact or
contractual interpretation arising under the order which is not disposed of
by agreement, by pursuing any right or remedy which Seller may have in law
or equity in any Israeli court of competent jurisdiction. Pending the final
decision on a dispute hereunder, the Seller shall proceed diligently with
its performance of the order obligations in accordance with the direction
of IAI.
XXI MISCELLANEOUS
(A) Any action or inaction by IAI or the failure of IAI, on any occasion,
to enforce any right or provision of this order shall not be construed
to be a waiver by IAI of its rights hereunder, and shall not prevent
IAI from enforcing such provision or right on any future occasion. A
determination that any portion of this order is unenforceable or
invalid shall not affect the enforceability of validity of any of the
remaining portions of this order.
(B) The rights and remedies of IAI herein are cumulative, and are in
addition to any other rights or remedies that IAI may have at law or
in equity.
(C) Assignment of this order or any interest therein or any payment due or
to become due thereunder, without the written consent of IAI, shall be
void.
(D) IAI shall be entitled at all times to sctoff any amount owing at any
time from Seller to IAI or to any of IAI's affiliated companies
against any amount payable at any time by IAI in connection with this
order.
(E) Representatives, nominated by a party for the performance of its
rights and obligations under the order, shall, to the extent such
performance takes place in the other party's premises, be subject to
such other party's relevant security regulations.
(F) Notwithstanding any other provision contained herein the Seller
agrees to indemnify and hold IAI harmless against any and all
damages (including consequential damages) or claims (whether in
contract or negligence otherwise) which arise out of or are
in any way connected with the goods and services delivered
hereunder.
XXII UNITED STATES GOVERNMENT CONTRACT PROVISIONS
Ex. 5 - 3
CONFIDENTIAL
(A) If this Order is placed under a United States Government ("USG")
Contract or subcontract, the content of the USG FAR/DFAR Contract
Provisions, Certifications and Representations Appendices attached
hereto shall apply to this order and the parties performance
hereunder.
(B) Notwithstanding the provisions of Article XX hereof, the USG FAR/DFAR
Contract Provisions, Certifications and Representations Appendices
Attached hereto shall be construed according to the United States
Federal Law of Government Contract as enumerared and applied by United
States Federal Judicial bodies and Boards of Contract Appeals.
EX. 5 - 4
CONFIDENTIAL
SUPPLY AGREEMENT
FOR
MATERIAL
EXHIBIT 6
EDI SYSTEM REQUIREMENTS
Ex. 6 - 1
CONFIDENTIAL
++
[REMAINING PAGE OF EXHIBIT REDACTED]
++ REPRESENTS MATERIAL WHICH HAS BEEN REDACTED AND SEPARATELY FILED WITH THE
SECURITIES AND EXCHANGE COMMISSION PURSUANT TO A REQUEST FOR CONFIDENTIAL
TREATMENT PURSUANT TO RULE 406 UNDER THE SECURITIES ACT OF 1933, AS AMENDED.
CONFIDENTIAL
EXHIBIT 7
Annulled
CONFIDENTIAL
EXHIBIT 8
Annulled
CONFIDENTIAL
SUPPLY AGREEMENT
FOR
MATERIAL
EXHIBIT 9
LIST OF IAI APPROVED SUPPLIERS / MANUFACTURERS (ASL)
Ex. 9 - 1
CONFIDENTIAL
IAI APPROVED SUPPLIERS LIST Revision: New IAI APPROVED SUPPLIERS LIST
Date: March 16 2004
SUPPLIER CATEGORIES:
SUPPLIER DATA 14 Manufacturer
17 Distributor
1D Preferred Manufacturer
1E Frame agreement Supplier
|
|
SUPP. SUPP. PRIMARY SECONDARY ADDITIONAL ADDITIONAL
NO. SUPPLIER NAME CODE ADDRESS CAT. CODE CODE CODE CODE
--- ---------------------------- ----- --------------------- ----- ------- --------- ---------- ----------
1 ++ 11366 ++ 17
++
++
3 ++ 11610 ++ 16
++
++
4 ++ 15440 ++ 16
++
5 ++ 19561 ++ 17
++
6 ++ 11717 ++ 16
++
7 ++ IG206 ++ 17
++
++
8 ++ IL225 ++ 17
++
++
9 ++ C4538 ++ 17
++
++
10 ++ C4573 ++ 17
++
++
11 ++ C6051 ++ 17
++
++
12 ++ CC337 ++ 14
++
++
13 ++ N0090 ++ 1D
++
++
14 ++ CO549 ++ 14
++
++
++
++
15 ++ CA303 ++ 14
++
++
16 ++ C2498 ++ 14
++
++
17 ++ C8275 ++ 14
++
++
18 ++ CC911 ++ 14
++
++
19 ++ CA254 ++ 14
++
++
20 ++ CA877 ++ 14
++
++
++
21 ++ C6166 ++ 14
++
22 ++ NR691 ++ 14
++
++
23 ++ CD487 ++ 17
++
++
24 ++ CC955 ++ 17
++
++
SUPPLIER APPROVAL
DATA
------------------------------
IAI APPROVAL EXPIRATION LAST
NO. GROUP DATE DATE UPDATED
--- ----- -------- ---------- --------
1 0 25/12/03 01/12/05 25/12/03
3 40 12/05/98 01/12/05 20/01/03
4 40 00/01/00 01/02/04 03/02/02
5 40 15/05/03 01/06/05 15/06/03
6 40 27/03/03 01/03/05 27/03/03
7 40 08/01/03 01/01/05 20/01/03
8 40 19/11/00 01/12/04 06/06/02
9 40 01/01/02 01/07/04 19/01/04
10 40 27/02/02 01/01/05 19/01/04
11 40 00/01/00 01/04/05 19/01/04
12 0 07/12/03 01/12/05 08/12/03
13 40 09/03/04 01/03/05 07/01/04
14 40 24/06/03 01/06/05 25/06/03
15 0 18/01/02 01/01/04 12/03/03
16 40 09/03/04 01/02/04 04/02/03
17 40 01/02/99 01/06/04 05/01/03
18 0 20/12/02 01/12/04 03/06/03
19 0 18/03/02 01/03/04 12/03/03
20 40 20/05/98 01/02/05 12/02/03
21 40 01/02/01 01/03/05 08/04/03
22 40 19/05/03 01/01/05 02/03/03
23 0 01/12/03 01/12/05 01/12/03
24 40 02/07/01 01/01/04 18/01/04
PRODUCT TYPE(S) ALLOWED TO DELIVERED TO IAI FROM THAT
------------------------------------------------------------------------------------------------------------
LOW COBALT
SPRING ALLOY CARBON STAINLESS BASE ALUMINIUM COMPRESSING
METALS STEELS STEELS STEEL STEELS NICKEL TITANIUM ALLOYS ALLOYS COPPER BRONZE ALLOYS
NO. 600 604 607 608 620 630 631 633 636 650 657 675
--- ------ ------ ------ ------ --------- ------ -------- ------ --------- ------ ------ ------------
1 x x
3 x x
4 x x
5 x x
6 x x
7 x
8 x
9 x
10 x x x
11 x
12 x
13 x
14 x
15 x
16 x x
17 x
18 x
19 x
20 x
21 x
22 x
23 x
24 x
Page 1 of 4 06/07/2004
CONFIDENTIAL
IAI APPROVED SUPPLIERS LIST Revision: New IAI APPROVED SUPPLIERS LIST
Date: March 18 2004
SUPPLIER CATEGORIES:
--------------------
SUPPLIER DATA 14 Manufacturer
17 Distributor
1D Preferred Manufacturer
1E Frame agreement Supplier
|
|
SUPP. SUPP. PRIAMARY SECONDARY ADDITIONAL ADDITIONAL IAI
NO. SUPPLIER NAME CODE ADDRESS CAT. CODE CODE CODE CODE GROUP
--- ------------------------------ ----- ------------------------------ ----- -------- --------- ---------- ---------- -----
25 ++ NN731 ++ 14 40
++
26 ++ C7003 ++ 14 40
++
27 ++ C9523 ++ 17 40
++
28 ++ CD698 ++ 14 40
++
++
29 ++ C2700 ++ 14 0
++
++
30 ++ CB575 ++ 14 40
++
31 ++ C5406 ++ 17 40
++
32 ++ NM807 ++ 14 40
++
33 ++ CC764 ++ 14 40
++
34 ++ CD961 ++ 14 40
++
35 ++ NN361 ++ 14 40
++
++
36 ++ C1794 ++ 17 40
++
37 ++ NR819 ++ 14 40
++
38 ++ C9925 ++ 12 0
++
39 ++ C0295 ++ 17 40
++
40 ++ CB855 ++ 14 40
++
41 ++ C1235 ++ 17 40
++
42 ++ C6901 ++ 14 0
++
++
43 ++ C2352 ++ 14 40
++
++
44 ++ B9706 ++ 13 0
++
++
45 ++ C4533 ++ 14 40
++
SUPPLIER APPROVAL DATA
------------------------------
APPROVE EXPIRATION LAST
NO. DATE DATE UPDATED
--- -------- ---------- --------
25 28/07/03 01/02/04 25/02/03
26 22/05/02 01/05/04 10/07/03
27 12/12/00 01/06/05 19/01/04
28 16/06/03 01/06/05 16/06/03
29 03/09/07 01/09/04 11/09/03
30 10/12/00 01/02/04 10/03/03
31 21/10/01 01/10/04 08/12/03
32 24/06/98 01/06/04 01/12/03
33 01/11/01 01/03/04 10/03/03
34 18/06/03 01/06/05 21/07/03
35 04/11/01 01/06/04 01/12/03
36 08/08/02 01/04/05 19/01/04
37 07/08/03 01/06/06 01/06/03
38 18/02/02 01/02/04 12/03/03
39 28/05/03 01/03/05 12/03/03
40 23/05/01 01/05/04 19/02/04
41 04/12/02 01/04/05 19/01/04
42 13/08/02 01/08/04 12/03/03
43 12/01/03 01/10/04 13/01/03
44 07/09/01 01/09/04 25/12/03
45 01/06/99 01/02/04 18/06/03
PRODUCT TYPES(S) ALLOWED TO DELIVERED TO IAI FROM THAT
------------------------------------------------------------------------------------------------------------
LOW COBALT
EPRING ALLOY CARBON STAINLESS BASE ALUMINIUM COMPRESSING
METALS STEELS STEELS STEEL STEELS NICKEL TITANIUM ALLOYS ALLOYS COPPER BRONZE ALLOYS
------ ------ ------ ------ --------- ------ -------- ------ --------- ------ ------ ------------
NO. 600 604 607 608 620 630 631 633 636 650 657 675
--- ------ ------ ------ ------ --------- ------ -------- ------ --------- ------ ------ -----------
25 x
26 x
27 x
28 x
29 x x x
30 x
31 x
32 x x x
33 x x x x x
34 x x x x
35 x
36 x
37 x x
38 x
39 x x x
40 x
41 x
42 x x
43 x
44 x
45 x x x x x
Page 2 of 4 06/07/2004
CONFIDENTIAL
IAI APPROVED SUPPLIERS LIST Revision: New IAI APPROVED SUPPLIERS LIST
Date: March 16 20O4
SUPPLIER CATEGORIES:
SUPPLIER DATA 14 Manufacturer
17 Distributor
1D Preferred Manufacturer
1E Frame agreement Supplier
|
|
|
PRIM- SECOND ADDITIO ADDITIO
SUPP. SUPP ARY ARY NAL NAL IAI
NO. SUPPLIER NAME CODE ADDRESS CAT. CODE CODE CODE CODE GROUP
------------------------------------------------------------------------------------------------------------------------------------
46 ++ C3561 ++ 14 40
++
47 ++ C6117 ++ 14 0
++
++
48 ++ C4191 ++ 14 0
++
49 ++ C2353 ++ 14 40
++
50 ++ C4174 ++ 12 40
++
51 ++ CC228 ++ 0
++
52 ++ C4282 ++ 1D 40
++
53 ++ CD357 ++ 14 40
++
54 ++ NH860 ++ 0
++
++
55 ++ NP990 ++ 14 40
++
++
56 ++ C4408 ++ 12 0
++
57 ++ NN730 ++ 14 40
++
++
58 ++ C9596 ++ 14 0
++
59 ++ C2227 ++ 14 0
++
++
60 ++ CB539 ++ 17 40
++
++
61 ++ C2B55 ++ 14 40
++
62 ++ C335O ++ 14 40
++
++
63 ++ CA141 ++ 12 0
++
++
64 ++ NQ110 ++ 14 40
++
++
65 ++ CA253 ++ 14 0
++
++
66 ++ C7242 ++ 14 40
++
++
SUPPLIER APPROVAL
DATA
------------------------------
Approval Expiration Last
NO. Date Date Updated
-----------------------------------
46 08/03/04 01/05/05 08/06/03
47 13/08/02 01/06/04 12/03/03
48 25/04/02 01/04/04 12/03/03
49 15/06/03 01/06/05 18/02/04
50 30/01/03 01/01/05 24/02/03
51 30/10/02 01/10/04 06/11/03
52 12/11/01 01/01/05 10/11/03
53 10/03/02 01/03/04 14/04/02
54 20/12/02 01/12/04 03/06/03
55 06/03/01 01/02/05 10/02/03
56 06/03/02 01/03/04 12/03/03
57 26/07/03 01/03/05 13/05/03
58 10/05/03 01/05/05 10/06/03
59 17/12/03 01/12/05 17/12/03
60 25/12/02 01/12/04 20/01/03
61 05/11/01 01/11/03 03/01/02
62 09/07/02 01/09/05 22/10/03
63 08/02/02 01/02/04 12/03/03
64 29/07/03 01/10/05 09/10/03
65 01/03/02 01/03/04 12/03/03
66 18/11/00 01/10/05 09/10/03
PRODUCT TYPE(S) ALLOWED TO DELIVERED TO IAI FROM THAT
------------------------------------------------------------------------------------------------------------
LOW COBALT
SPRING ALLOY CARBON STAINLESS BASE ALUMINIUM COMPRESSING
METALS STEELS STEELS STEEL STEELS NICKEL TITANIUM ALLOYS ALLOYS COPPER BRONZE ALLOYS
NO. 600 604 607 608 620 630 631 633 636 650 657 675
-----------------------------------------------------------------------------------------------------------------
46 x
47 x
48 x
49 x x
50 x
51 x
52 x x
53 x
54 x
55 x
56 x
57 x
58 x
59 x x x x
60 x
61 x
62 x
63 x
64 x
65 x
66 x x x x
Page 3 of 4 06/07/2004
CONFIDENTIAL
IAI APPROVED SUPPLIERS LIST Revision: New IAI APPROVED SUPPLIERS LIST
Date: March 16 2004
SUPPLIER CATEGORIES:
--------------------
SUPPLIER DATA 14 Manufacturer
17 Distributor
1D Preferred Manufacturer
1E Frame agreement Supplier
|
|
SUPP. SUPP. PRIMARY SECONDARY ADDITIONAL ADDITIONAL IAI
NO. SUPPLIER NAME CODE ADDRESS CAT. CODE CODE CODE CODE GROUP
--- ----------------------------- ----- ------------------------------ ----- ------- --------- ---------- ---------- -----
67 ++ C5155 ++ 1D 40
++
68 ++ CA816 ++ 14 40
++
++
69 ++ C9193 ++ 14 0
++
++
++
70 ++ C3320 ++ 17 40
++
++
71 ++ CC028 ++ 17 40
++
++
72 ++ CB449 ++ 17 40
++
++
73 ++ CD335 ++ 14 40
++ ++
74 ++ C1224 ++ 17 40
++
++
SUPPLIER APPROVAL
DATA
------------------------------
APPROVAL EXPIRATION LAST
NO. DATE DATE UPDATED
--- -------- ---------- --------
67 27/02/01 01/02/04 23/12/03
68 18/02/02 01/02/04 24/03/02
69 23/07/02 01/07/04 12/03/03
70 16/07/02 01/12/04 18/01/04
71 08/07/03 01/03/05 24/03/03
72 20/04/03 01/11/04 29/01/03
73 25/07/03 01/07/04 29/08/02
74 03/04/03 01/04/05 03/07/03
PRODUCT TYPE(S) ALLOWED TO DELIVERED TO IAI FROM THAT
------------------------------------------------------------------------------------------------------------
LOW COBALT
SPRING ALLOY CARBON STAINLESS BASE ALUMINIUM COMPRESSING
METALS STEELS STEELS STEEL STEELS NICKEL TITANIUM ALLOYS ALLOYS COPPER BRONZE ALLOYS
NO. 600 604 607 608 620 630 631 633 636 650 657 675
--- ------ ------ ------ ------ --------- ------ -------- ------ --------- ------ ------ ------------
67 X X
68 X X
69 X
70 X
71 X
72 X X X X
73 X
74 X
Page 4 of 4 06/07/2004
