[ EXHIBIT 10.1 - MATERIAL CONTRACT ]
THIS SERVICE AGREEMENT dated this 16th day of February 2005.
BETWEEN:
International Star, Inc. of 0000 Xxxxxxxx Xxxxxx Xxx., Xxxxxxxxx, Xxxxxx, 00000
(the "Customer")
- AND -
Zereko Nevada, Inc. of 0000 Xxxxxx Xxxx, Xxxxx 0000, Xxx Xxxxx, Xxxxxx, 00000
(the "Service Provider")
Service Agreement (Contractor)
BACKGROUND:
A. The Customer is of the opinion that the Service Provider has the necessary
qualifications, experience and abilities to provide services to the Customer.
B. The Service Provider is agreeable to providing such services to the Customer,
on the terms and conditions as set out in this Agreement. IN CONSIDERATION OF
the matters described above and of the mutual benefits and obligations set forth
in this Agreement, the receipt and sufficiency of which consideration is hereby
acknowledged, the parties to this Agreement agree as follows:
Engagement
1. The Customer hereby agrees to engage the Service Provider to provide
the Customer with services consisting of technical examination and
analysis of the Detrital Wash property of International Star, Inc., in
Arizona currently referred to as "Detrital Wash Project". ( EXHIBIT
"A") : APPROACH TO DETRITAL WASH PROJECT and subject to the following
considerations:
2. The Service Provider will be pleased to accept such engagement subject
to the following:
(1) Time devoted to the project will be conditional upon prior
commitments. Currently this is minimal and is not anticipated to
increase significantly over the next several months. Over the long
term this may change. However, commitments made to International Star,
Inc. prior to the changes will be honored first.
(2) Service Provider, if required by International Star, Inc., will
carry requisite professional liability insurance as well as public
liability and other requisite insurances, and Service Provider will be
held "safe/harmless" from any and all liabilities.
(3) International Star, Inc. acknowledges that the lead engineer for
Zereko Nevada, Inc., Xx. Xxxxx X. Xxxxxxxx, is an engineer in the
"mining" discipline (Curriculum Vitae attached - EXHIBIT "B") and does
not have specific training in either exploration (geology) nor metal
concentrating/recovery processes (mineral dressing/metallurgy). Where
necessary final recommendations will be subject to examination by, and
approval of, experts in subject disciplines.
(4) During any calendar year, work on the project will be compensated
on the basis of submission of approved Invoices. All amounts will be
expressed in US Dollars.
(5) International Star, Inc. will provide retainers in advance based
on estimates for work for the following accounting period. Invoicing
will be monthly and will account, in detail, for activities for such
period for which a retainer was received. Excess amounts will be
applied to the following period. Shortfall to be reimbursed within
fourteen days.
(6) Reporting on activities will be every two weeks, or on a specific
project basis, as agreed between principals.
(7) International Star, Inc. provides Service Provider with a detailed
list of work for the project (could be jointly developed), and such
other services as the Customer and the Service Provider may agree upon
from time to time (the "Services"), and the Service Provider hereby
agrees to provide the Services to the Customer.
Term of Agreement
3. The term of this Agreement will begin on the date of this Agreement
and will remain in full force and effect until completion of the
Services.
Performance
4. Both parties agree to do everything necessary to ensure that the terms
of this Agreement take effect.
Compensation
5. For the Services provided by the Service Provider under this
Agreement, the Customer will pay to the Service Provider compensation
in the following manner. For the Services provided by the Service
Provider under this Agreement, the Customer will pay to the Service
Provider compensation based on a Cost Plus 12% to 20% based on mutual
agreement. Compensation will be payable with the following frequency:
International Star, Inc. will provide retainers in advance based on
estimates for work for the following accounting period. Invoicing will
be monthly and will account, in detail, for activities for such period
for which a retainer was received. Excess amounts will be applied to
the following period. Shortfall to be reimbursed within fourteen days.
The Customer is entitled to deduct from the Service Provider's
compensation any applicable deductions and remittances as required by
law.
Expenses
6. The Service Provider will be reimbursed from time to time for all
reasonable necessary expenses incurred by the Service Provider in
connection with providing the Services hereunder. The Service Provider
will furnish statements and vouchers to the Customer for all such
expenses.
Confidentiality
7. The Service Provider acknowledges that a material term of the
Agreement with the Customer is to keep all confidential information
belonging to the Customer absolutely confidential and protect its
release to the public. The Service Provider agrees not to divulge,
reveal, report or use, for any purpose, any confidential information
which the Service Provider has obtained or which was disclosed to the
Service Provider by the Customer.
8. The obligation to protect the confidentiality of the Customer's
confidential information will survive the termination of this
Agreement and will continue indefinitely.
9. The Service Provider may disclose any of the confidential information:
a. to a third party where the Customer has consented in writing to
such disclosure; and
b. to the extent required by law or by the request or requirement of
any judicial, legislative, administrative or other governmental
body. However, the Service Provider will first have given prompt
notice to the Customer of any possible or prospective order (or
proceeding pursuant to which any order may result), and the
Customer will have been afforded a reasonable opportunity to
prevent or limit any disclosure.
Non-Competition
10. Other than with the express written consent of the Customer, which
will not be unreasonably withheld, the Service Provider will not,
during the continuance of this Agreement or within 5 years after the
termination of this Agreement, be directly or indirectly involved with
a business which is in direct competition with the particular business
line of the Customer.
11. For a period of 5 years from the date of termination of this
Agreement, the Service Provider will not divert or attempt to divert
from the Customer any business the Customer had enjoyed, solicited, or
attempted to solicit, from other individuals or corporations, prior to
termination of this Agreement.
Non-Solicitation
12. Any attempt on the part of the Service Provider to induce others to
leave the Customer's employ, or any effort by the Service Provider to
interfere with the Customer's relationship with its employees or other
service providers would be harmful and damaging to the Customer. The
Service Provider agrees that during the term of this Agreement and for
a period of 3 years after the end of the term, the Service Provider
will not in any way, directly or indirectly: 1. induce or attempt to
induce any employee or other service provider of the Customer to quit
employment or retainer with the Customer 2. otherwise interfere with
or disrupt the Customer's relationship with its employees or other
service providers; 3. discuss employment opportunities or provide
information about competitive employment to any of the Customer's
employees or other service providers; or 4. solicit, entice, or hire
away any employee or other service provider of the Customer.
Assignment
13. The Service Provider will not voluntarily or by operation of law
assign or otherwise transfer the obligations incurred pursuant to the
terms of this Agreement without the prior written consent of the
Customer.
Capacity/Independent Contractor
14. It is expressly agreed that the Service Provider is acting as an
independent contractor and not as an employee in providing the
Services hereunder. The Service Provider and the Customer acknowledge
that this Agreement does not create a partnership or joint venture
between them.
Modification of Agreement
15. Any amendment or modification of this Agreement or additional
obligation assumed by either party in connection with this Agreement
will only be binding if evidenced in writing signed by each party or
an authorized representative of each party.
Time of the Essence
16. Time will be of the essence of this Agreement and of every part
hereof. No extension or variation of this Agreement will operate as a
waiver of this provision.
Entire Agreement
17. It is agreed that there is no representation, warranty, collateral
agreement or condition affecting this Agreement except as expressed in
it.
Severability
18. In the event that any of the provisions of this Agreement are held to
be invalid or unenforceable in whole or in part, all other provisions
will nevertheless continue to be valid and enforceable with the
invalid or unenforceable parts severed from the remainder of this
Agreement.
Currency
19. Unless otherwise provided for, all monetary amounts referred to herein
will be paid in US dollars.
Governing Law
20. It is the intention of the parties to this Agreement that this
Agreement and the performance under this Agreement, and all suits and
special proceedings under this Agreement, be construed in accordance
with and governed, to the exclusion of the law of any other forum, by
the laws of the State of Nevada, without regard to the jurisdiction in
which any action or special proceeding may be instituted.
IN WITNESS WHEREOF the parties have duly executed this Service Agreement this
16th day of February 2005.
International Star, Inc.
/s/Xxxxxx X. Xxxxxxx
----------------------------
President / CEO
[ SEAL ]
Zereko Nevada, Inc.
/s/ Xxxxxx X. Xxxxx
--------------------------------
CEO
[ SEAL ]
Attachments: EXHIBIT "A" - APPROACH TO DETRITAL WASH PROJECT
EXHIBIT "B" - CURRICULUM VITAE
EXHIBIT "A"
APPROACH TO DETRITAL WASH PROJECT.
We perceive the "Examination, Exploration and Assessment" (EEA) of the Detrital
Wash Project to be an information-driven exercise.
We CANNOT emphasize the importance of any project information too much!
INFORMATION REQUESTED
Based on research of I-Star's website the following reports should be available:
1. AuRIC Metallurgical Laboratories. Physical recovery of precious metals from
ore samples from Detrital Wash Property. Results were from a two-ton sample
taken from a trench 1,000 yards long and 200 feet wide to a depth of 40
feet.
2. LS Capital Corporation. Messrs Xxxxx Xxxxxxxxxxx and Xxxxxx Xxxxx to report
on the "The Evaluation of the Property as well as the entire Detrital Wash
Basin".
3. Agreement with LS Capital Corporation. LS Capital to apply for drilling
permits and to conduct an exploration program to a depth of 10ft (200
holes). The proposal for this program would be invaluable to assess their
planned approach.
4. An Exclusive Extraction Agreement with "Gold Standard Mines". What did
these people propose? We may gain insight into thinking outside the
envelope.
5. Xx. Xxxxxxx X. Xxxxxxx. To validate the "Recovery Process" and to "Conduct
a full exploration project program". Same as above - insight outside the
envelope.
In addition, and based on material in the initial report from Precor,
information (reports) must be available for samples provided to Advanced
Analytical of Las Cruces, New Mexico whom reported assays as follows: -
Sample Identification DW009 DW010 DW011 DW012
Assay Number 4072 4075 4073 4074
Element. Oz/Ton. Oz/Ton. Oz/Ton. Oz/Ton.
-------- ------- ------- ------- -------
Au - Gold. 0.72 0.33 0.68 0.77
Ag - Silver. 0.00 0.00 0.00 0.00
Pt - Platinum. 16.96 11.96 19.39 19.10
Rh - Rhodium. 1.88 1.55 1.80 2.16
Os - Osmium. 0.00 0.00 0.00 0.00
Ru - Ruthenium. 0.00 0.00 0.00 0.00
Pd - Palladium. 1.03 0.45 0.91 0.72
Ir - Iridium. 0.45 0.30 0.46 0.41
We would require information for the above indicating:
A. Where the sample was taken.
B. Depth over which sample taken.
C. How the sample was taken.
D. How the sample was treated.
E. How the sample was analyzed.
With respect to the latest round of examination by Kokanee Placer Ltd, we would
require the following information: -
1. Basis of the engagement - what/where was Kokanee to examine/explore?
2. Terms of the agreement - type of work? Period over which to conduct?
Others?
3. Execution - would like to have detail on how they proceeded with the work.
E.g.
o Why did Kokanee conduct the work over the particular area selected?
o How did Kokanee proceed with the work?
o What types of samples did they take (E.g. At one sample location seen
during the site visit the tag read as follows - Line 6 S 0+00E B/L 1.
Open. 2 Washed. 3. Graded). We presume that 1,2&3 refer to samples -
each treated differently).
o How were the samples handled?
o What were the assayed for?
o How was assaying to be carried out?
o Was there any pretreatment of samples?
4. Deliverables - what/when was Kokanee to report?
We are in possession of a preliminary (possibly draft) report dated May 28/04.
We wish to examine the entire final report including drawings and data.
Finally, we would like to examine (and digest) any other information available
with respect to the property - Xxxxx Xxxxxx refers to information with respect
to the original "South Hills Development" as well as the inundation, flooding
and wash of the works of that day. Xx. Xxxxxx also refers to a sample he
gathered that assayed in the oz/ton of gold (8.00?). All of this information
will help us with the context of the project. Each piece might (will) help in
piecing the puzzle together.
MERIT OF PROJECT.
Subject to examination of the requested reports, it appears that available
preliminary information from others (all professional and credible) point to the
conclusion that the project has merit and is well worthwhile pursuing. Previous
examinations generally indicate:- 1) A bulk sample from one location has yielded
dore buttons of precious metals 2) Detrital Wash contains material with
anomalous/economic values of gold and platinum - and possibly other precious
metals. 3) Values from a number of locations have been established - spatial
distribution . 4) Values are contained in a near surface unconsolidated mineral
matrix deposit. 5) Disturbances of the surrounding natural environment have
occurred - by others. 6) The deposit can be readily moved (mined) - conventional
equipment. 7) The mineral matrix is amenable to simple mineral concentration
technology. 8) Concentrated minerals are amenable to conventional metal recovery
technology. 9) Recovered metal complexes are amenable to conventional refining
technologies.
WHAT IS BEING PROPOSED
At this juncture what is required is to examine the project in a systematic
fashion in order to confirm and define: -
A. Tenor and extent of identified "hotspots".
B. Identify strata/size range in which values are contained.
C. Physical location of "hotspots" in relation to each other.
D. Identify nature and extent of "existing disturbances" over the defined
areas.
E. Determine who is responsible for existing disturbances.
F. Design and cost a confirmatory exploration program.
G. Recommend and cost a remedial program for past and future disturbances.
H. Secure permitting to carryout the proposed program.
Assuming the above program yields positive results the next steps would entail;
a. Determine, recommend and cost a mining program.
b. Determine, recommend and cost concentration methods.
c. Determine, recommend and cost extraction methods.
d. Determine, recommend and cost refining methods.
e. Prepare an engineering study and prefeasibility on project viability.
PROGRAM OF WORK.
In order to accomplish the above-noted objectives we propose the following
strategy:
a) Examine available information in detail.
b) Based on findings from previous work define areas of merit (hotspots) for
further detailed examination.
c) Design and propose an implementation technique.
d) Obtain quotes to execute the program and prepare a budget.
The above-listed work could be carried out in Sudbury and probably can be
accomplished in a fourteen-day period. Once the proposal and budget is accepted
a visit to the area is warranted. At that time the following would be
accomplished;
I. Conjoint with a corporate representative, conduct a visit to the
offices of Arizona Bureau of Mines and Mineral Resources (MMR) in
Tucson. MMR is the facilitator and coordinator for exploration/mining
projects in the state. MMR is very much aware of the project and what
has happened thus far.
II. Conjoint with a corporate representative, conduct a visit to the BLM
office in Kingman. BLM's Kingman office is responsible for the area
over which the project is located.
III. Identify, meet with and interview possible sub-contractors whom may
execute the work.
IV. Preliminary field layout of the work.
Upon return to Sudbury permit applications will be completed and submitted to
the various agencies. These will have to be accompanied by financial security
for proposed reclamation of disturbances. The entire process (application for
and approval of permits) is anticipated to take approximately three weeks.
Attached hereto is a Xxxx-type chart illustrating an approximate anticipated
time line.
Aspects of work identified herein are illustrated together with the approximate
time frame to accomplish such - in a perfect world.
==========================================
EXHIBIT "B"
CURRICULUM VITAE - Xxxxx X. Xxxxxxxx.
Locational History.
o Born in Brits, South Africa - October 11, 1936.
o Migrated (family member) to Zimbabwe - +/- 1949.
o Transferred to Zambia (staff in bank) - +/- 1959.
o Move to Great Britain (education) - 1963.
o Transferred to Peru (professional appointment) - 1966.
o Short period in New York, N.Y. - 1967.
o Migrated to Canada - 1967 (hold Canadian citizenship).
o In Canada lived in following locations:
o Xxxx Lake - Manitoba.
o Flin Flon - Manitoba.
o Thetford Mines - Quebec.
o Ungava Bay - Quebec.
o Chibougamua - Quebec.
o Timmins - Ontario.
o Sudbury - Ontario.
Educational History.
o Junior School at De Aar, South Africa.
o High School at Harare, Zimbabwe (Matriculation/A-levels - Grade 12 equiv).
o Camborne School of Mines (A.C.S.M. 1ST Class - X.Xx. Min. Eng. equiv).
o Registered Professional Engineer - Ontario, Canada.
Chronology - Professional Career.
1954 - 1959. Various capacities with "The Standard Bank of S. Africa" located in
Wankie, Rusape and Harare - Zimbabwe and at Luanshya - Zambia.
1959 - 1962. Learner miner and subsequently learner official with Selection
Trust Copper Mines in Luanshya, Zambia.
Early 1963. Miner at South Crofty Tin Mines, Redruth, Cornwall, Great Britain.
1963 - 1966. Undergraduate studies at Camborne School of Mines, Camborne,
Cornwall, Great Britain.
1966 -1967. U/G Xxxxxxx. Cerro de Pasco Corporation Ltd. Yauricocha, Peru.
- Square-set mining of a polymetallic Cu/Zn/Pb/Au/Ag ore.
Mid 1967. Junior Engineer. Cerro de Pasco Corporation Ltd. New York.
1967 - 1968. Project Engineer. Xxxxxxxx Xxxxxx Ltd. Xxxx Lake, Manitoba.
o Supervising contractors during the shaft sinking of Fox Mine and
planning future mining operations at Fox.
o Devised a novel method for mechanized cut and fill that was
subsequently implemented at Fox Mine.
1968 - 1979. Project Engineer. Cerro Corp. of Canada Inc. Flin Flon, Manitoba.
o Designed and supervised construction of infrastructure of mine.
o Supervising contractors during shaft sinking and exploration
development of the Pinebay Mine.
o Involved with feasibility of the mine as ore reserves were established
from the underground workings.
1970 -1974. Mine Superintendent, Asbestos Corporation, Thetford Mines, Quebec.
o Operated the King Beaver underground Block Caving Mine @ 5,000 tons
per day with a workforce in excess of 200.
o Increased production from 3,000 tpd to 5,000 tpd.
o Initiated experimental block cave layout to accommodate modern LHD
equipment.
o Initiated major mine expansion program (lower levels) utilizing a
contractor workforce of in excess of 200 - in addition to mine
complement of 200.
o Initiated ore handling systems, crusher and load-out facilities in
lower levels of existing shaft.
1975. Mine Superintendent, Asbestos Corporation, Ungava, Quebec.
o Operated the open pit at the Ungava mine.
o Redesigned pit slopes and implemented development program to expand
pit.
1976. General Mine Superintendent, Xxxxxx Mines Ltd., Chibougamua, Quebec.
o Operated the Copper Rand Mine - 3,600 tpd with + 200 employees.
o Mining methods included a mix of cut-and-fill, shrinkage and long
holing.
o Responsible for mining, engineering and geological departments.
o Administered the shaft-deepening project at the Portage Mine.
1977 - 1978. Project Manager, XxxXxxxx Mining and Tunnelling Company @ Xxxx
Creek No 2 Shaft.
o Managed shaft sinking from 2,000 to 5,100 feet below surface.
o Devised and implemented novel combination of contractor supervision
and owner labour in order to furnish the shaft.
o Furnished shaft with steel sets/lining, mid-shaft loadout, shaft
bottom loadout, arrestor gear,
o Roped-up Koepe hoists and effected changeover from construction to
operational mode.
1979 - 1980. Chief Engineer, XxxXxxxx Mining and Tunnelling Company @ Head
Office in Sudbury. Involved with bidding, engineering, administration and
implementation of operations at following projects:
o Fraser Ventilation Shaft, Falconbridge Mines Ltd., Sudbury, Ontario.
- Sinking concrete lined vent shaft to depth of +5,000 Ft.
o No 3 Colliery, Cape Breton Development Corporation, Sydney, N.S.
- Driving, supporting (shotcrete lining) and equipping large
diameter ventilation raises at No 3 Colliery for Cape Breton
Development Corporation utilizing hardrock mining gear (not
explosion proof).
o Brunswick Mining and Smelting - No 3 mine, Bathurst, New Brunswick.
- Developing conveyor galleries, crusher station and rock silos.
- Instal slung conveyor 2,000 Ft. Instal 8 Ft gyratory crusher.
o Quirke Mine, Rio Xxxxx, Xxxxxx Lake, Ontario.
- Ramp and level development projects.
- Production of uranium ore from inclined room and pillar stopes.
o Buck Township Ramp, Teledyne Canada Ltd., Cobalt, Ontario.
- Surface set-up for a development program.
- Ramp development and u/g d.drill program.
o Bulk Sampling, Dekalb Canada Inc., Sault St. Xxxxx, Ontario.
- Surface setup for a bulk-sampling program.
- Bulk sampling of a tungsten ore.
o H.W. Shaft, Westmin Mines Ltd, Vancouver Island, B.C.
- Surface setup for a shaft-sinking program.
- Sink shaft to approximately 2,000-foot depth.
- Establish mid shaft loadout and develop exploration drifts.
o Shoal Lake Ramp, Consolidated Professor Mines Ltd.
- Establish docks and tugboat/barge facilities for summer access of
island.
- Establish "ice bridge" facilities for winter access of island.
- Surface setup for a ramping program.
- Develop a 2,000-foot ramp, u/g d.drill program.
o Stanleigh No. 2 Shaft, Rio Algom Ltd., Elliot Lake, Ontario.
- Establish mid-shaft load-out for developing access levels.
- Drive 3,600-foot pilot raises and slash to 30 ft diameter (two x
1,800').
- Instal 1 x 12 ft dia. hoist and 1 x 16' dia. hoist.
- Slash No 2 shaft to larger size and re-equip - 3,600-foot depth.
- Develop ramp from 1,800 ft to 3,600 ft levels.
- Implement mine development and raising program.
- Instal crushers, loadout conveyors and loading pockets.
- Execute changeover of shaft from construction to production mode.
o Raise Program, Xxxxx Xxxxxx Mine, Bathurst, New Brunswick.
1981 - 1982. General Manager, Raise Contracting Ltd. Manage and administer major
contracts:
x Xxxxxxxx Mines Ltd. +/- $4.0 million per month.
o Rio Algom Ltd. +/- $2.0 million per month.
o Falconbridge Nickel Mines Ltd. +/_ $1.0 million per month.
1983 - 2000. Senior Engineer, XxxXxxxx Industries Ltd. Management of division
involved with bidding, engineering, administration and implementation of
operations at following projects:
o Deepening Xxxxxxxxxx Xx 0 Xxxxx, Xxxxxxxxxxxx Mines Ltd, Sudbury,
Ontario.
- Deepen shaft from 2,500 foot to 4,000-foot horizons.
- Instal shaft load-out systems.
o Ramp Extension - Shoal Lake, Consolidated Professor Mines Ltd.
- Re-establish surface facilities for program
- Extend ramp workings by 2,000 feet to 4,000-foot depth.
- Drive raises, do bulk sampling, execute u/g d.drill program.
o Construct Xxxxx Xxxx mine, Teck/Corona Operating Corp. Hemlo, Ontario.
- Excavate collar.
- Set-up surface facilities for shaft sinking and mine development.
- Instal 12 ft and 8 ft mine hoists.
- Sink shaft to 3,000 ft depth.
- Establish mid shaft bulkhead in order to facilitate simultaneous
development and sinking programs.
- Execute initial mine production program at 1,000 tons per day
utilizing mechanized cut and fill mining from mid shaft loadout.
- Develop ore/waste passes, install crusher and loadout facilities.
o Shaft Sinking - Detour Lake Mine, Placer Dome Inc. Detour, Canada.
- Excavate collar.
- Set-up surface facilities for shaft sinking and mine development.
- Sink shaft to 3,600 ft depth.
o Construct Golden Giant Mine, Noranda Mines Ltd, Hemlo, Ontario.
- Excavate collar.
- Set-up surface facilities for shaft sinking and mine development.
- Sink shaft to 3,300 ft depth.
- Establish mid shaft bulkhead in order to facilitate simultaneous
development and sinking programs.
- Relocate mid-shaft bulkhead twice as shaft was deepened.
- Execute initial mine production program at 1,000 tons per day
utilizing long-hole open stopes with delayed consolidated fill,
from mid shaft loadout.
- Instal mine dewatering systems.
- Develop ore/waste passes; install crusher, load-out conveyor and
loading pockets.
o Underground development - Xxxxx Mine, Lac Minerals, Quebec.
- Surface setup for an underground mine development program.
- Completed a major mine development program including ramping,
drifting, raising, garage, crusher and ore/waste silos
excavations.
- Installed crusher, load-out conveyor and loading pockets.
o Whistle Open Pit, Inco Ltd., Sudbury, Ontario.
- Instal an overland electrical distribution system.
- Setup for an open pit operating program.
- Instal surface crusher, weighscale and loadout conveyor/bin.
- Develop and operate an open pit mine with a waste/ore ratio of
2:1 at 12,00 tons per day of ore.
- Truck crushed ore to Inco's Clarabelle mill - a distance of 75 km
through the City of Sudbury.
x Xxxxxxx Shaft deepening and mine development. Inco, Sudbury, Ontario.
- Set-up a unique hoisting system. A ground mounted double-drum
hoist was sheaved in a Koepe tower utilizing an innovative force
distribution framework. Horizontal forces were transferred to the
vertical plane for distribution to the concrete tower.
- Deepened shaft from 2,800 foot to 4,000-foot horizon.
- Developed mine utilizing sinking set-up for muck handling while
new koepe hoists were simultaneously installed.
- Installed a 3,000 ft suspended cable-conveyor complete with
mid-conveyor truck dumps and loading stations. - Installed mine
dewatering system.
- Completed mine electrification program.
- Excavated silos and installed loadout conveyor and loading
pockets.
o Operating Shebandowan Mine. Inco Ltd., Thunder Bay, Ontario.
- Re-opened and reconditioned a previously operating mine.
- Re-opened and reconditioned a previously operating concentrator.
- Develop infrastructure and changed mining method at mine.
- Operate the mine and mill. Concentrate, as a slurry, delivered to
the smelter in Sudbury.
- Mixed mining methods - Long-hole open panels with delayed
consolidated fill as well as mechanized and conventional
cut-and-fill.
- Carried out underground exploration program and increased
reserves from 1.2 million to +3.0 million tons.
- Increased production from 1,800 tpd to 2700 tpd. Workforce in
excess of 400 persons including swingshift.
- Operated both mine and mill continuously. 24 hrs/day; 7
days/week; 52 weeks/year.
o Evaluate Mining properties; prepare feasibilities; engineering
studies.
- Evaluated more than 60 properties over a ten-year period
including gold, base metal sulphides and industrial mineral
deposits.
- Prepared at least 8 feasibility studies
- Executed a substantial number of engineering studies for a large
variety of projects including:
- Coal mining shaft and ramp and undersea access projects.
- Iron ore
- extension of mining operations from open pit to underground and
inclined conveyorway loadout.
- A number of mine dewatering and recommissioning programs.
- Order of magnitude estimates for a number of mining projects.
- Several salt mine development and related infrastructure
programs.
- Several and miscellaneous other programs.
o Montcalm Ramp, Outokumpu Mines Ltd., Timmins, Ontario.
- Set-up isolated infrastructure for a ramp development program
including road access, power generation, camp, etc.
- Develop a 2km ramp and execute an u/g d.drill program. o Stope
Salvaging, Xxxx Mine, XX Xxxxxx Gold Corp.
- Equip and set-up remote mucking program for salvaging high-grade
material left behind in old stopes - provided in excess of 250
tpd of material from such sources.
o Shaft Sinking - No 3 shaft, Agnico Eagle Mines Ltd., Cadillac, Quebec.
- Set-up sinking equipment to develop a shaft to a final horizon of
7,180 Ft. Note: - Currently the deepest shaft in the Western
Hemisphere.
- Sink and equip the shaft.
- Develop and equip stations.
- Establish midshaft load-out facilities.
- Establish midshaft bulkhead to allow simultaneous mine
development and shaft sinking.
- Instal all shaft infrastructure and changeover from construction
to production modes.
Currently. Own and operate Kar-Mer Tech Inc. Kar-Mer has provided consulting and
management services to:
o Protium Metals Inc.
o Xxxxxx Xxxxxx Gold Mine Inc.
x XxxXxxxx Industries Ltd.
o Ont. Min of Labour - Health & Safety Branch.
o Xxxxxxxxxxxx - Xxxx Division.
o Amec E & C Services Limited.
o Rose Dome Properties.
o Zereko Mining Contractors.
o Crystal Quartz Xxxxxx Inc.
o Great Southern Enterprises Corp.
Aspects of work carried out through Kar-Mer Tech: -
- Recovery & refining of gold from jewelers waste.
- Feasibility of a small gold mining operation in N. Ontario.
- Research and technical support in industrial litigation.
- Technical advise in support of mining regulations.
- Major relocation of services in a large scale operation.
- Cost aspects of dewatering, development & mining of a 3,000 t.p.d. new
mining operation.
- Land acquisition and corporate matters to re-establish a concentrating
facility.
- Pre-feasibility studies.
- Preparation of business plans.
- Mine operating cost estimates.
- Construction capital cost estimates
- Initial planning for start-up of an industrial mineral open pit
operation.
Technical Papers.
1. Sinking/Equipping of Xxxx Creek No 2 Shaft. Presented at Timmins local
chapter of C.I.M.
2. Stanleigh No 4 Ventilation raise - An Accomplishment. Presented at 7th
C.I.M. Operators Conference in Bathurst, New Brunswick.
3. Gargantuan Hemlo. Article published in The Northern Miner January 19/84.
4. Production Lead Time Reduction - Part 1. Presented at 9th C.I.M. Operators
Conference in Elliot Lake, Ontario.
5. Problems Encountered During Mine Development. Presented to The Canadian
Society for Civil Engineering, 3rd Conference - Construction and Mining in
Difficult Soils, Sudbury, Ontario.
6. The Sinking and Development of the Xxxxx Xxxx and Golden Giant Mines at
Hemlo. Presented at Hemlo local chapter of C.I.M.
7. Production Lead Time Reduction - Part 1I. Presented at 89th C.I.M. Annual
General Meeting in Toronto, Ontario.
8. A Contractor's Worst Nightmare. Article published in Canadian Mining
Journal.
=====================================================
