PRODUCT ADAPTATION
AND SUPPLY CONTRACT
THIS CONTRACT is made and entered into as of the 25th day of November, 1994,
by and between * (hereinafter referred to as "Buyer") and Amerigon, Inc.
headquartered at 000 X. Xxxxxxxxxx Xx., Xxxxxxxx, Xxxxxxxxxx 00000
(hereinafter referred to as "Seller").
WHEREAS, Buyer is interested in having Seller (i) make recommendations
regarding and (ii) design, develop and manufacture Electric Vehicle (EV)
components and 2 EVs for Buyer's EV project;
WHEREAS Seller is interested in performing such work and has agreed
with Buyer on the * AND AMERIGON MEETING MINUTES dated from 17 October
1994 to 20 October 1994 ("Meeting Minutes") in that regard, which Meeting
Minutes reflect Seller's expectation that it will sell 48 sets of EV parts
and 2 EVs;
NOW, THEREFORE, in view of the foregoing premises and in consideration
of the mutual covenants and promises contained in this Contract, Buyer and
Seller agree as follows:
ARTICLE 1. CONTRACT SCOPE
1.1. In this Contract Buyer agrees to order the design, development and
manufacture of 48 sets of EV components and 2 EVs for Buyer's EV project.
1.2. In this Contract, the Seller and the Buyer agree to the Meeting Minutes
for completing this project. The Buyer has therefore decided to award the
project to the Seller. Seller, therefore, in consideration of the payment to
be made by the Buyer to the Seller, has agreed to enter into a Contract which
will result in the development and manufacture of 50 sets of EV parts. Seller
agrees to complete the design of the vehicle and manufacture and subassemble
parts in the U.S. Final vehicle and frame assembly will be completed at the
Seller's facility by Seller for two vehicles and for 40 vehicles at Buyer's
facility by Buyer in *. Eight part sets will not be assembled and will
be provided to Buyer as spare part kits. The vehicle's exterior will be the
same as Buyer's prototype *EV-IV. The purposes of these vehicles are for
Buyer's evaluation and normal driving on public roads in *. The specific
tasks to be performed in connection with this Contract are set out and shall
be limited to those set forth in Exhibit A, which is attached to and
incorporated by reference in this Contract.
Page 1 of 8
-------------------------
* Confidential portions omitted and filed separately with the Commission.
PRODUCT ADAPTATION AND SUPPLY CONTRACT
______________________________________________________________________________
ARTICLE 2. SELLER'S RESPONSIBILITY
2.1. The Seller will complete the design and development, tooling, prototype
evaluation, design validation and manufacturing of 50 sets of EV parts,
meeting overall vehicle and components specifications and program schedule
set forth in Exhibit's B, C and D.
2.2. The Seller will be responsible for manufacturing and procurement of all
components as set forth in Exhibit E, which outlines procurement
responsibility for both Seller and the Buyer.
2.3. Two of the Fifty EV part sets will be assembled by Seller for final
evaluation and will be sent to Buyer to be approved by Buyer, and forty-eight
sets of the EV parts will be supplied to Buyer for final vehicle and frame
assembly in *.
2.4. The Seller will assist Buyer and will provide sufficient technical
support to assure successful completion of vehicle assembly in *. This
includes technical support to Buyer and its supplier for final frame and
vehicle assembly and body in white components manufacturing.
2.5. The Seller will prepare and deliver to the Buyer all the detail and
master drawings, analysis report and testing results, process documentation
and assembly procedures.
2.6. The Seller will be responsible for component packaging suitable for Sea
shipment to *. (all shipments will be F.O.B. Seller's facility).
2.7. The Seller will be responsible for all deliverables as outlined in
Exhibit A ( Program Scope ), Exhibit D ( Program Schedule ) and Exhibit E
( Procurement Responsibility ).
2.8. The Seller will provide Buyer with all the fixtures and jigs for final
frame assembly in * and all the program specific component tooling after
completion of the work. The fixtures and jigs for final vehicle assembly
will be designed by Seller and fabricated by Buyer.
2.9. The Seller will install Climate Control Modules in the driver and
passenger seats of each vehicle.
ARTICLE 3. BUYER'S RESPONSIBILITY
3.1. The Buyer shall provide Seller with a clay model, specifications,
requirements and will continuously assist Seller to assure successful program
completion as outlined in Exhibit D.
Page 2 of 8
-------------------------
* Confidential portions omitted and filed separately with the Commission.
PRODUCT ADAPTATION AND SUPPLY CONTRACT
______________________________________________________________________________
3.2. The Buyer is responsible for shipping and obtaining all relevant
documents needed for the importation of the parts and two prototype vehicles
into the Buyer's county. This includes all the import fees and taxes imposed in
Buyer's country.
3.3. The Buyer will be responsible for final frame and vehicle assembly in
*. The fixtures and jigs for vehicle assembly will be fabricated by Buyer.
3.4. The Buyer and Seller are responsible for procurement of components
according to Exhibit E.
ARTICLE 4. CONTRACT PRICE
4.1. The total contract price for completion of the work hereto is:
USD 8,252,000. (Eight Million, Two Hundred Fifty-two Thousand
U.S. Dollars only).
4.2. The Contract Price includes all design & development, component tooling &
prototype frame assembly fixtures, prototype build, evaluation & design
validation, production of 48 vehicle part kits, completion of 2 vehicles and
technical support.
4.3 The Contract Price includes all taxes, including income taxes, duties,
fees, levies, customs duties and other charges of any such kind, levied in
connection with this Contract or its performance imposed in the Seller's
country. A condition of this provision is that all deliverables under this
Contract will be shipped directly to a non-U.S. destination (i.e. *).
4.4. The Contract Price excludes incoming and/or withholding taxes as well as
any duties, customs, duties, fees, levies and other charge whatsoever levied in
connection with this Contract or its performance which may be payable in the
Buyer's country. Any of the above mentioned taxes, duties, fees, levies,
charges, and etc. shall, if they occur, be borne and paid for by the Buyer. The
Buyer shall consequently indemnify and keep the Seller harmless from any of the
above-mentioned taxes, duties, fees, levies, charges and etc.
4.5. If significant changes are made and agreed to by Buyer and Seller in the
specifications or scope of work to be performed under this Contract which will
result in increased or decreased costs incurred by Seller, Buyer and Seller
will negotiate an appropriate change in the Contract Price.
Page 3 of 8
-------------------------
* Confidential portions omitted and filed separately with the Commission.
PRODUCT ADAPTATION AND SUPPLY CONTRACT
______________________________________________________________________________
ARTICLE 5. TERMS OF PAYMENT
5.1. The Contract Price stated in Article 4.1, shall be paid by the Buyer
(via Bank Transfer) as follows;
a) 20% of the Contract Price shall be paid as an advance payment
within fourteen (14) days after execution of this Contract by
Seller and Buyer.
b) 20% of the Contract Price shall be paid fourteen (14) days after
completion of vehicle design and shipment of the first drawing
package to Buyer.
c) 15% of the Contract Price shall be paid fourteen (14) days after
shipment of two (2) prototype vehicles.
d) 35% of the Contract Price shall be paid fourteen (14) days after
shipment of forty-eight (48) part kits.
e) 10% of the Contract Price shall be paid fourteen (14) days after
Buyer completes the assembly of forty (40) vehicles or, in any case,
within six months of shipment to Buyer of the 48 part kits in (d)
above.
5.2. The Buyer shall not be responsible for any deduction or retention of
payments by the Buyer to the Seller as may be imposed by law or as a result
of any other circumstances beyond the Buyer's control.
ARTICLE 6. PERFORMANCE OF WORK AND REMEDIES
6.1. Performance Of Work: The Seller and Buyer will use reasonable care in
performing the work which each is required to perform pursuant to Article 1
above and Exhibit A. At the completion of each phase of the Contract, Seller
will deliver to Buyer the deliverables referenced in Article 2.
6.2. Remedies: If Seller fails to use reasonable care in performing any task
that is included in the Contract which Seller is required to perform pursuant
to Article 1 and 2 above and Exhibit A, Buyer will give notice to Seller of
such failure. If Seller fails or neglects to carry out the Remedy or fails to
perform any provision of this Contract, the Buyer may after forty-five (45)
day's written notice to the Seller, and without prejudice to any other remedy
he may have, make good such deficiencies, and the Buyer's costs thereon shall
be deducted from the sums then or thereafter due to the Seller. Buyer's costs
under this paragraph will be limited to reasonable market rate costs for the
deficient items.
Page 4 of 8
PRODUCT ADAPTATION AND SUPPLY CONTRACT
______________________________________________________________________________
ARTICLE 7. WORK PRODUCT
7.1 All designs, drawings, specifications, technical data, plans, instruments
and other work product produced by, through, or on behalf of, the Seller in
the performance of this Contract shall be, at all times, the property of the
Buyer, and the Buyer is vested with all rights therein.
ARTICLE 8. GUARANTEE
8.1. This guarantee is valid for a period of twelve (12) months from the date
of receipt of parts by Buyer.
8.2. The Seller guarantees that the goods are new and meet the specifications
set forth in Exhibits B, C and D, but only to the extent that Seller has
procurement responsibility for related components per Exhibit E.
8.3. Should the goods or any parts thereof be repaired, replaced or altered
at Seller's expense to fulfill the guarantee, the Seller shall provide a new
guarantee of the same conditions for such materials being required, replaced
or altered for a period of twelve (12) months from the date of completion of
such remedial work.
8.4. The Buyer shall notify the Seller in writing without delay, and no later
than 20 days after the date on which the defect appeared, of any defect that
has appeared and shall give the Seller every opportunity to inspect and
remedy them.
8.5. Should the Seller fail to take such remedial action within 30 days, the
Buyer may, at its option, take remedial action at the Seller's expense or
select to accept the goods not meeting the specifications herein with
adjustment in the purchase price. Any expenses charged to Seller by Buyer
under this provision will not exceed reasonable market prices for the items
involved.
ARTICLE 9. LIABILITY
9.1. The Seller will not knowingly incorporate in any drawing or other
document furnished to Buyer under this Contract any copyrighted material or
patented concept of a third party without first notifying the Buyer.
9.2. Recognizing that final vehicle assembly is the responsibility of the
Buyer and control over the use of the vehicles resides with Buyer, Buyer
indemnities and holds harmless Seller against any claims for loss or injury,
involving components, assemblies, or vehicles designed or delivered under
this Contract, made against Seller by Buyer's employees or agents or by third
parties.
Page 5 of 8
PRODUCT ADAPTATION AND SUPPLY CONTRACT
______________________________________________________________________________
9.3. In no event the Buyer or Seller shall be liable for indirect or
consequential damages.
ARTICLE 10. FORCE MAJEURE
10.1. In this Contract, the event of Force Majeure shall mean
a) flood, storms and other natural disasters, war, civil commotion,
hostilities, rebellion, insurrection, strikes, freight embargo,
acts of ordinances of governmental or state authorities of both
countries.
b) any other circumstances like or unlike foregoing, which are beyond
the reasonable control of the party affected.
10.2. Upon learning of an event of Force Majeure which threatens its
performance hereunder, a party shall give the written notice thereof
immediately to the other parties hereto. Upon request of the other parties,
such a party shall provide further information concerning such an event.
10.3. In case of Force Majeure continues for more than 180 days, the Buyer
shall, without prejudicing the other rights under this Contract, have the
right to terminate this Contract.
ARTICLE 11. TERM AND TERMINATION
11.1. This Contract shall be effective as of the date written in the first
paragraph (unnumbered) of this Contract and expire upon the delivery of all
deliverables and completion of payments under the contract, unless earlier
terminated as provided in Section 11.2 below.
11.2. Either party may terminate this Contract immediately upon written
notice to the other party if the other party breaches any material obligation
under this Contract and fails to cure such breach within sixty (60) days
after being given written notice of such breach.
11.3. Either party may terminate this Contract immediately upon written
notice to the other party if one of the parties goes into liquidation,
bankruptcy proceedings are initiated against it, a receiver of its assets is
appointed, a general assignment for the benefit of its creditors is made or
if substantial change in the legal status, ownership or management takes
place. The same shall apply if force majeure for a period of more than 180
days.
11.4 The rights and obligations of the parties under Sections 8, 9, and 13
above shall survive termination or expiration of the Contract.
Page 6 of 8
PRODUCT ADAPTATION AND SUPPLY CONTRACT
______________________________________________________________________________
ARTICLE 12. MISCELLANEOUS
12.1. Any modifications or amendments to this Contract are only valid if made
in writing to this Contract and if duly signed by the parties.
12.2. The language to be applied during the performance of the Contract is
English. All documents or correspondences shall be in English.
12.3. Should one or more stipulations of this Contract be held to be invalid,
unenforceable or illegal for any reason, the other stipulations of this
Contract shall nevertheless remain effective. In such case the hiatus in the
Contract shall be filled by valid provision coming as close as possible to
what the parties had intended if they had known the invalidity of the
respective stipulations.
12.4. Each party shall not assign the Contract or any part thereof, without
the written consent of the other party.
ARTICLE 13. ARBITRATION
13.1. The Buyer and Seller shall use their best efforts to settle any claimed
breach, dispute or controversies of this Contract, making a good-faith effort
to reach a just and equitable settlement satisfactory to both parties. If the
claim is not settled by the senior executives of the parties at that meeting,
then, unless the parties otherwise agree in writing, it shall be finally
settled by arbitration in accordance with the UNCITRAL Arbitration Rules in
effect on the date of this Contract. Such arbitration shall be the sole and
exclusive remedy between the parties with respect to such claim. Such
arbitration shall be held in Los Angeles, California, U.S.A.
13.2. The dispute referred to arbitration is not a reason to stop the
fulfillment of the other contractual obligation by the parties.
ARTICLE 14. PATENTS
14.1. The Seller shall be responsible for any infringement with regard to
patent, utility model, trade-xxxx or design in the EV project whether in the
Buyer's country or any other country or place. In the event that any dispute
relating to such right or rights might arise, Buyer Shall be entitled to
cancel this Contract at his own accord and shall remain immune from any
liability and responsibility for whatever arises from such dispute.
14.2. The Seller shall be solely responsible therefore and shall defend,
reimburse, indemnify and keep the Buyer innocent thereof at the Seller's risk
and expense.
Page 7 of 8
PRODUCT ADAPTATION AND SUPPLY CONTRACT
______________________________________________________________________________
ARTICLE 15. OBSERVANCE OF SECRECY
15.1 During the term of this Contract, the Seller shall hold confidential and
will note disclose in any manner to any third party or parties any information
concerning all information furnished by the Buyer under this Contract.
ARTICLE 16. SIGNATURE
IN WITNESS WHEREOF, this Contract to be executed by their duly authorized
representatives on the day and year first above written.
AMERIGON, INC. *
By: /s/ Xxxx X. Xxxxxx By: /s/ *
-------------------------------- -------------------------------
Xxxx X. Xxxxxx *
-------------------------------- -------------------------------
Title: Vice President Title: Vice President
-------------------------------- -------------------------------
Date: November 25, 1994 Date: November 25, 1994
-------------------------------- -------------------------------
Page 8 of 8
-------------------------
* Confidential portions omitted and filed separately with the Commission.
EXHIBIT A
Work Scope & Program Cost
Breakdown
EXHIBIT A
WORK SCOPE
ITEM AMERIGON * REMARK
------------------------------------------------------------------------------------------------------------------
1 STYLING &
SKIN (POINT & CARVE) O * WILL PROVIDE SKIN
DATA (COMPUTER DATA & DRAWING)
------------------------------------------------------------------------------------------------------------------
2 SKIN FAIRING; CURVE
DATA - SURFACE DATA O MAKING SMOOTH SURFACE USING CAD
SYSTEM
------------------------------------------------------------------------------------------------------------------
3 ENGINEERING
- PACKAGE LAYOUT 0 0 - * WILL PROVIDE BASIC
LAYOUT DRAWING
- MASTER DRAWING 0 - AMERIGON MUST MEASURE
ACCURATE CHASSIS
MOUNTING POINT (SENTRA
93,94 MY)
- DETAIL DRAWING 0
- ASSY DRAWING 0 - * WILL PROVIDE
COLOR COMBINATION CHART
- INSTAL DRAWING 0
-------------------------------------------------------------------------------------------------------------------
4 PROTOTYPE VEHICLE (2) O INCLUDE ALL PARTS
-------------------------------------------------------------------------------------------------------------------
5 TOOLS & FIXTURE O ALL COMPONENTS AND FRAME
ASSEMBLY FIXTURES
-------------------------------------------------------------------------------------------------------------------
6 PARTS (48) O O SEE PROCUREMENTS
RESPONSIBILITY (EXHIBIT E)
-------------------------------------------------------------------------------------------------------------------
- Amerigon must control all the sub-companies which provide components to
Amerigon for this EV project, in order to well correspond between * and
sub-companies under Amerigon's control.
- Amerigon must design new *XX XX and all engineering drawings, however,
maintaining *EV III styling (exterior & interior) only.
- * can not provide parts drawing because there is no drawing about
*EV III (That is hand made product).
- * use CATIA computer system, so Amerigon must provide above mentioned
drawing by CATIA data and/or paper drawing. (Preliminary Release;
APR. 30, 1995, Final Release: OCT. 30, 1995).
- Amerigon must make new EPL (Engineering parts List) Reference to the
Attachment Detail Parts List (15 pages).
1 of 3
-------------------------
* Confidential portions omitted and filed separately with the Commission.
DEVELOPING FLOW
[Development Flowchart]
ACTIVITIES
DEFINITION
- DESIGN AND DEVELOPMENT
Amerigon will perform the necessary design and analyses required to verify
the existing * body and frame design for their *EV. This includes
completing the body design (interior and exterior) with all the electrical and
component system integration. Amerigon will be responsible for developing all
the master and detailed drawings and tooling for limited volume manufacturing
purposes. This includes all the fit and function trials on prototype
components. During this period * will have engineering staff available
at Amerigon for training and program coordination with *. In addition, we
will hold meetings as required in * and the U.S. to discuss the program
status. Amerigon to supply the drawings necessary to fabricate the parts that
Amerigon has designed. For the skin-related interior and exterior body and
trim pieces and complicated cast pieces, Amerigon will supply section and part
drawings. Amerigon will not supply detailed drawings for carry-over parts but
will provide the outline package.
- COMPONENT TOOLING & PROTOTYPE ASSEMBLY FIXTURES
Amerigon (including our suppliers) will design and assemble the component
tooling suitable to manufacture 50 sets of electric vehicle parts. All the
tooling with the exception of carryover parts will be manufactured by
Amerigon. Tooling will include simple assembly fixtures for completion of the
two vehicles and fixtures for final frame assembly in *. The
deliverables for this activity to Buyer are all the engineering drawings and
reports
- PROTOTYPE BUILD, EVALUATION & DESIGN VALIDATION
Amerigon will build two complete vehicles for basic performance, stability and
limited durability testing. These two completed vehicles will be shipped to
* for their final approval. Amerigon will purchase all the necessary
components to complete these two vehicles including the carryover parts.
Amerigon will also provide * with all the needed information including
company names, addresses, and product description, etc., for carry-over parts.
The deliverables for this activity to Buyer are two (2) completed Evs.
-------------------------
* Confidential portions omitted and filed separately with the Commission.
ACTIVITIES
DEFINITION
- PRODUCTION OF PARTS
Amerigon will manufacture two completed vehicles and 40 sets of parts as
assembly kits that will include sub-assembled components as outlined in
Procurement Responsibility. We will also manufacture 8 complete sets of parts
for use as spares. Amerigon will also provide an experienced engineer on-site
to assist * with final vehicle assembly limited to the time period shown
in the program schedule. The deliverable for this activity to Buyer are 48
sets of part kits.
- TECHNICAL SUPPORT
Amerigon will do technical support for body in white component assembly in
* with his expense including freight, meal, accommodation charge
irrespective of the period.
- Technical Support
- Request information for * Homolgation
- Owner's Manual
- Service Manual
- Assembly Manual
- Engineering Part List
- Tool and Jigs List
-------------------------
* Confidential portions omitted and filed separately with the Commission.
AMERIGON
------------------------------------------------------------------------------
SUMMARY OF PROPOSAL COSTS
PROGRAM ACTIVITY AMERIGON'S FINAL PROPOSAL QUOTATION
SUBMITTED 9-29-94
------------------------------------------------------------------------------
Design & Development $1,750,000
------------------------------------------------------------------------------
*Component Tooling & $2,827,500
Prototype Assembly
and Fixtures (Includes
RTM Tooling)
------------------------------------------------------------------------------
Prototype Build, $1,105,200
Evaluation & Design
Validation
------------------------------------------------------------------------------
*Production of 48 $2,230,750
Vehicle Part Kits
------------------------------------------------------------------------------
Installation of Climate $90,000
Control System in the seats
------------------------------------------------------------------------------
Tooling Cost for Final $92,850
Frame Assembly (Jigs & Assembly
Fixtures)
------------------------------------------------------------------------------
Technical Support for $72,000
Body in White
Component Assembly
in *
------------------------------------------------------------------------------
Packaging Cost $83,700
------------------------------------------------------------------------------
------------------------------------------------------------------------------
TOTAL $8,252,000
------------------------------------------------------------------------------
------------------------------------------------------------------------------
*Note: The tooling cost includes RTM for body components. The cost for
production of 48 vehicles includes new responsibility for additional parts.
See attached revised procurement responsibility.
-------------------------
* Confidential portions omitted and filed separately with the Commission.
EXHIBIT B
Preliminary Overall Vehicle
Specification
EXHIBIT B
Preliminary Overall Vehicle Specification
for * *EV-IV
1.0 VEHICLE TYPE
Passenger: 4
Type: 2 Door Hatch Back
Drive: Front Wheel (Motor Direct Drive)
2.0 PHYSICAL DIMENSIONS
Overall Length: 4,055 mm
Width: 1,675 mm
Height: 1,490 mm
Wheelbase: 2,485 mm
Track Front: 1,440 mm
Rear: 1,425 mm
Curb Weight: 1,400 kg (target)
Weight Distribution: 50/50 With One Occupant
3.0 CLEARANCES
Nominal Ground Clearance: 165mm
Depth of pothole that can be cleared: N.A.
Angle of ramp that can be cleared: 15 DEG. (Min.)
Approach Angle: 17 DEG. (Min.)
Departure Angle: 17 DEG. (Min.)
Height of curb that can be cleared: N.A.
Front wheel to fender. Amerigon recommends 30-40 mm
(* to verify)
Rear wheel to fender: Amerigon recommends 30-40 mm
(* to verify)
4.0 ACCELERATION AND POWER
Acceleration: 0 to 400 m: 21.0 sec.
0 to 100 kph: 16 sec.
Max. Speed: More than 120 km/h
Hill Climbing Ability: 20% Min. at 15 kph for up to 5 Min.
Page 1 of 4
-------------------------
* Confidential portions omitted and filed separately with the Commission.
VEHICLE SPECIFICATION CONT.
5.0 RANGE (MAINTENANCE FREE LEAD ACID BATTERY)
Constant Speed 40 kph): More than 150 km
City Drive (*): More than 60 km
6.0 BRAKE
Performance
60 to 0 kph: 43 m (max.)
30 to 0 kph: 18 m (max.)
Max. Speed to 0 kph: 75 m
Max. deceleration by brakes: 1g (max.)
Wet Pavement 60 to 0 kph: 52 m (max.)
Uniformity of braking deceleration
Spec to be developed by *
Regeneration before brake application
Up to 0.3 g (Adjustable by controller) when acceleration pedal is fully
lifted. Maximum regen must be adjustable by *
Regenerative during brake application
Up to 0.6 g (Adjustable by controller) when accelerator is fully lifted.
Maximum regen must be adjustable by *
Response Time
Response Time from pedal application: 100 msec (max.)
Response Time from pedal release: 100 msec (max.)
Vehicle stability during braking
Must be able to maintain control under heavy braking.
Maximum 0.25 degree yaw.
Brake noise: Less than 50 db
Parking Brake: Meets FMVSS standards
7.0 SUSPENSION
According to Basic Vehicle (Carry Over)
8.0 TIRE AND WHEEL
Tire Size: 175/70/R13 - use Goodyear Invicta GLR
Temp.: T105/70/D14
Wheel Size: 5.5 J x 13
Page 2 of 4
-------------------------
* Confidential portions omitted and filed separately with the Commission.
VEHICLE SPECIFICATION CONT.
9.0 HANDLING
Lateral Acceleration: 0.75 g (min.)
Degree of body roll: 3.5 degree max. at 0.5 g
5.0 degree max. at max. accel.
10.0 DRIVE TRAIN
Motor & Controller Type: AC Induction
Power: Satisfy Vehicle Performance
Energy Used: Satisfy Driving Range
Transmission Type: Single Speed
Final Drive: Differential
11.0 OCCUPANT INTERACTION
Display Supported:
Speedometer, Odometer, Turn Signal, Drive Engaged, Battery Level,
Motor Temp., Lights for Brake, High Beam Low Energy Remaining,
Seat Belt, Door Opening, Hood Opening, Refer to Ordering Spec.
12.0 OCCUPANT PROTECTION AND SAFETY
Crash Worthiness: Per Amerigon's Specification (Do not do vehicle
tests, Simulation only)
Seat Belts: Frame will be hard points for 3 points belts
High Voltage Isolation Incorporated in controller
High Voltage Crash Disconnect
Battery Containment Requirements
Fail-safe models for loss of power brakes and steering revert to manual
Field of Vision: According to * *EV - III
Do not start*: At Charging
To prevent quick start, driver has to foot brake
pedal when start
13.0 DURABILITY
Warranty: 1 year 24,000 km (min.)
Target Life
Batteries: 1,000 Recharge cycle
Brakes: 120,000 km
Shock Absorbers: 150,000 km
Tire: 50,000 km
Battery pack replacement in field service possible
Page 3 of 4
-------------------------
* Confidential portions omitted and filed separately with the Commission.
VEHICLE SPECIFICATION CONT.
14.0 MAINTENANCE
Periodic maintenance: Check transmission oil
Check coolant
15.0 ENVIRONMENT
Temp. Range: -20 DEG. C to 40 DEG. C Operating
-40 DEG. C to 85 DEG. C Storage
Humidity Range: 0 to 100% Non-condensing
Rain on Chassis: Must not damage or impair function
Must not allow any current leakage from/into electrical
system
16.0 INTERFACES
Electrical Supply to Charger: 220 V 15 Amps. 60 Cycles
Test Equipment Interface: RS 232 C
Tow hooks and towing provisions 2 in front, 1 in rear
Vehicle ID Number: Assigned by *
Require warning level: SAE standard on high voltage
systems
Page 4 of 4
-------------------------
* Confidential portions omitted and filed separately with the Commission.
EXHIBIT C
Component Specification
EXHIBIT C
* *EV - IV COMPONENT SPECIFICATION
ITEMS REMARKS
-------------------------------------------------------------------------------
transmission single speed same
-------------------------------------------------------------------------------
brakes carry over same
vacuum assist
-------------------------------------------------------------------------------
suspension carry over same
-------------------------------------------------------------------------------
tires 175/70 R 13 Amerigon recommends using
T105/70 D 14 Goodyear Invicta GLR model
for low rolling resistance
-------------------------------------------------------------------------------
wheels 5.5 J x 13 same
wheel covers
-------------------------------------------------------------------------------
instruments digital clock same
gauges:
speedometer Amerigon will also include
trip odometer the Energy Management
motor temp System
current meter -display screen control
battery level meter panel
warning lights
turn signals
brake/parking brake
EV failure
door ajar
low battery
high beam
fog lamp
seat belt
rear glass heating
-------------------------------------------------------------------------------
glass windscreen: laminated same
door: tempered
back: tempered with
heater (on timer)
-------------------------------------------------------------------------------
seats front: same
bucket type
level to slide
level to recline
head rest: up/down
rear:
fixed bench
head rests
cloth covering
-------------------------------------------------------------------------------
Page 1 of 3
-------------------------
* Confidential portions omitted and filed separately with the Commission.
COMPONENT SPECIFICATION CONT.
ITEMS REMARKS
-------------------------------------------------------------------------------
interior console: same
with storage box
power window switch
ash tray: in dash
rear mirror: day/night
dual cloth visors
formed cloth headliner
door trim:
cloth in center
door speakers
trunk trim: fiberboard
pillar trim:
carpet
assist grip: passenger
coat hanger: rear seat
glove box: w/o lock
-------------------------------------------------------------------------------
exterior bumper: 2.5 mph same
body color
door handle and trim
standard color
mirrors: manual remote
body color
glass seal: black PVC
wheelwell liners
tow hooks: front and rear
badges: film type
-------------------------------------------------------------------------------
Audio ETR + cassette same, with the
antenna: induction type exception of external
on glass antenna
speaker: in front doors
5" or larger
-------------------------------------------------------------------------------
Page 2 of 3
COMPONENT SPECIFICATION CONT.
ITEMS REMARKS
-------------------------------------------------------------------------------
Electrical exterior lamp same
head lamp with turn
signal (semi-sealed
halogen type)
front fog lamp
rear combo lamp
license plate lamp
interior lamp
single horn
power windows
12V 60 AH aux btty
switches and controls:
fog lamp
hazards
power windows
door lock
emergency
direction (fwd, n, rev)
brake lights
horn
window heater
washer and wiper
variable intermittent
low and high settings
-------------------------------------------------------------------------------
Heating four speed fan same
rotary temp switch
-------------------------------------------------------------------------------
Climate Controlled CCS module in seat Amerigon recommends
Seat (option) control switch on console using optional unit
-------------------------------------------------------------------------------
Page 3 of 3
EXHIBIT D
Summary of Program Schedule
Page 1 of 4
AMERIGON
--------------------------------------------------------------------------------------------------------
* *EV - IV PRELIMINARY PROGRAM SCHEDULE
--------------------------------------------------------------------------------------------------------
9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12
--------------------------------------------------------------------------------------------------------
Amerigon to provide original +
proposal
Draft and finalize agreement for
* approval ---
Technical discussion in * XX
- *EV III review --
- digitized *EV-IV data +
- define contact names +
- define COP, materials, +
and processes from
detailed parts list
Packaging
Preliminary skin fairing, ----
component selection,
layout
Frame Engineering XXXXXXXXXXXXXXXXXXXXXXXX
- Design --------------
- Tooling -----------
- Manufacture parts -----
Body Engineering XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
- Design: Check surfaces, ---------------------
rebating, styling, exterior
parts -----------------
- Tooling
- Manufacture parts -----------
-------------------------
* Confidential portions omitted and filed separately with the Commission.
Page 2 of 4
AMERIGON
--------------------------------------------------------------------------------------------------------
*EV - IV PRELIMINARY PROGRAM SCHEDULE (CONT.)
--------------------------------------------------------------------------------------------------------
9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12
--------------------------------------------------------------------------------------------------------
Mechanical Systems XXXXXXXXXXXXXXXXXXXXXXXXXX
- Design and layout ------------------ . . . .
- Tooling ----------
- Manufacture parts --
Interior Engineering XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX
- Layout and ergonomics ----
- IP design and layout -----------------------
- IP tooling ----------------
- IP parts manufacture . . .---
- Door design and layout ---------------------
- Door tooling ------------
- Door parts manufacture . . . .--------
- Trim/seats/rebate design -------------------
- Trim/seats/rebate tooling ------------------
- Trim/seats/rebate parts . . .-----
manufacture
Electrical Engineering XXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXXX X X X X
- Design ------------------------
- Procure parts ----------------- - - - - - -
Prototype Construction XXXXXXXXXXXXXXX
- Frame ----
- Mechanical system ------
- Interior ----
- Body ----
- Electrical ------
- Testing . . --
Page 3 of 4
AMERIGON
--------------------------------------------------------------------------------------------------------
*EV - IV PRELIMINARY PROGRAM SCHEDULE (CONT.)
--------------------------------------------------------------------------------------------------------
9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12
--------------------------------------------------------------------------------------------------------
Ship 2 units to * +
* review 2 prototypes --
during testing at Amerigon
* agrees to release of +
parts
* agrees to release of +
tools XXXXXXXXXXXXXXXXX
----
Amerigon builds 48 kits -----
- Frame parts build ------
- Frame sub-assemblies ------
- COP procurement ------
- Kit assembly XXXX
- Ship kits to * --
Ship tools to * --
- Packing
- Ship
-------------------------
* Confidential portions omitted and filed separately with the Commission.
Page 4 of 4
AMERIGON
--------------------------------------------------------------------------------------------------------
*EV - IV PRELIMINARY PROGRAM SCHEDULE (CONT.)
--------------------------------------------------------------------------------------------------------
9 10 11 12 1 2 3 4 5 6 7 8 9 10 11 12
--------------------------------------------------------------------------------------------------------
Amerigon prepares drawings -------------------------. . .
Amerigon prepares operator ----------
manual
Amerigon prepares service ----------
manual
Amerigon provides technical ----------
advice on kit assembly
Amerigon provides preliminary +
layout
Amerigon provides final layout +
Amerigon provides +
homologation documents
Amerigon provides preliminary +
engineering parts list
Amerigon provides 2 revisions + +
of final engineering parts list
Amerigon provides preliminary +
assembly tooling list
Amerigon provides final +
assembly tooling list
_________________________________________________________
EXHIBIT E
Procurement Responsibility
_________________________________________________________
DETAIL PARTS BODY
&
PROCUREMENT RESPONSIBILITY
_________________________________________________________________________________________________________________________________
LIMITED PRODUCT
_____________________________________________
1000 BODY QTY COP/NEW MATERIAL PROCESS ENGINEERING TOOLS PROTO(2) PARTS(48) REMARKS
___ ____________________ ___ _______ ________ ________ ___________ ________ ________ _________ _______________
1100 SPACE FRAME & PANEL ASSY IN *
1101 UNDERBODY FRAME * NEW AL AMERIGON AMERIGON AMERIGON AMERIGON
1102 UNDERBODY PANEL * NEW PLASTIC AMERIGON AMERIGON AMERIGON AMERIGON
1103 FRONTEND FRAME * NEW AL AMERIGON AMERIGON AMERIGON AMERIGON I/FR BPP FRAME
1104 SIDE FRAME * NEW AL AMERIGON AMERIGON AMERIGON AMERIGON
1105 ROOF STRUCTURE FRAME * NEW AL AMERIGON AMERIGON AMERIGON AMERIGON
1106 FRONT FRAME * NEW AL AMERIGON AMERIGON AMERIGON AMERIGON
1107 REAR FRAME * NEW AL AMERIGON AMERIGON AMERIGON AMERIGON I/FR BPR RAIL
1108 WHEELHOUSE FRONT PANEL 1 NEW PLASTIC AMERIGON AMERIGON AMERIGON AMERIGON
1109 WHEELHOUSE REAR PANEL 1 NEW PLASTIC AMERIGON AMERIGON AMERIGON AMERIGON
1200 COVER PLATE RTM NOTE:
1201 SIDE PANEL 1/1 NEW FRP RTM AMERIGON AMERIGON AMERIGON * AMERIGON TO
1202 FRONT FENDER, XX/XX 0/0 XXX XXX XXX XXXXXXXX XXXXXXXX XXXXXXXX * INVESTIGATE TOOL
1203 ROOF 1 NEW FRP RTM AMERIGON AMERIGON AMERIGON * COST AND TIMING
OF
1204 FRONTEND PANEL (COWL) * NEW FRP RTM AMERIGON AMERIGON AMERIGON * THE RTM PARTS.
1205 REAREND PANEL * NEW FRP RTM AMERIGON AMERIGON AMERIGON *
1300 HOOD
1301 PNL-HOOD OUTER 1 NEW FRP RTM AMERIGON AMERIGON AMERIGON * SEE RTM NOTE
1302 PNL-HOOD INNER 1 NEW FRP RTM AMERIGON AMERIGON AMERIGON *
1303 HINGE ASSY-XXXX, XX 1 COP/NEW STEEL AMERIGON AMERIGON AMERIGON AMERIGON
1304 HINGE ASSY-XXXX, XX 1 COP/NEW STEEL AMERIGON AMERIGON AMERIGON AMERIGON
1305 STAY ROD 1 NEW STEEL AMERIGON AMERIGON AMERIGON AMERIGON
1306 BUMPER-HOOD OVER SLAM 2 COP RUBBER AMERIGON AMERIGON AMERIGON AMERIGON
1307 BUMPER-HOOD GUIDE 2 COP RUBBER AMERIGON AMERIGON AMERIGON AMERIGON
1308 WEATHER STRIP ASSY-HOOD
(REAR) 1 COP/ RUBBER AMERIGON AMERIGON AMERIGON AMERIGON
MODIFY
__________________________________________________________________________________________________________________________________
PAGE 1 OF 15
-------------------------
* Confidential portions omitted and filed separately with the Commission.
DETAIL PARTS BODY
&
PROCUREMENT RESPONSIBILITY
__________________________________________________________________________________________________________________________________
LIMITED PRODUCT
_____________________________________________
1000 BODY QTY COP/NEW MATERIAL PROCESS ENGINEERING TOOLS PROTO(2) PARTS(48) REMARKS
___ ____________________ ___ _______ ________ ________ ___________ ________ ________ _________ _______________
1309 SEAL STRIP ASSY-HOOD 1 COP/ AMERIGON AMERIGON AMERIGON AMERIGON
(FRONT) MODIFY
1310 STRIKER ASSY-HOOD 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
1311 LATCH ASSY-HOOD 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
1312 HANDLE ASSY-HOOD 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
LATCH RELEASE
1313 CABLE ASSY-HOOD 1 COP/MODIFY AMERIGON AMERIGON AMERIGON AMERIGON
RELEASE
1400 DOOR
1401 PANEL-DR OUTER, LH 1 NEW FRP RTM AMERIGON AMERIGON AMERIGON * SEE RTM NOTE
0000 XXXXX-XX XXXXX, XX 1 NEW FRP RTM AMERIGON AMERIGON AMERIGON *
1403 MEMBER ASSY-DOOR 1 NEW STEEL/AL AMERIGON AMERIGON AMERIGON AMERIGON PIPE
REINFORCE, LH
1404 MEMBER ASSY-DOOR 1 NEW STEEL/AL AMERIGON AMERIGON AMERIGON AMERIGON PIPE
REINFORCE, RH
1405 PANEL-DOOR INNER, LH 1 NEW FRP RTM AMERIGON AMERIGON AMERIGON *
0000 XXXXX-XXXX XXXXX, XX 1 NEW FRP RTM AMERIGON AMERIGON AMERIGON *
1407 FRAME ASSY-DOOR, LH 1 COP/NEW STEEL/AL AMERIGON AMERIGON AMERIGON AMERIGON
1408 FRAME ASSY-DOOR, RH 1 COP/NEW STEEL/AL AMERIGON AMERIGON AMERIGON AMERIGON
1407 HINGE ASSY-DOOR UPPER, 1 COP/NEW STEEL AMERIGON AMERIGON AMERIGON AMERIGON
LH
1408 HINGE ASSY-DOOR UPPER, 0 XXX/XXX XXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XX
0000 HINGE ASSY-DOOR LOWER, 1 COP/NEW STEEL AMERIGON AMERIGON AMERIGON AMERIGON
LH
1410 HINGE ASSY-DOOR LOWER, 0 XXX/XXX XXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XX
0000 REGULATOR ASSY-DOOR 1 COP/MODIFY AMERIGON AMERIGON AMERIGON AMERIGON
WINDOW, LH
1412 REGULATOR ASSY-DOOR 1 COP/MODIFY AMERIGON AMERIGON AMERIGON AMERIGON
WINDOW, RH
1413 LATCH ASSY-DOOR, LH 1 COP/MODIFY AMERIGON AMERIGON AMERIGON AMERIGON
1414 LATCH ASSY-DOOR, RH 1 COP/MODIFY AMERIGON AMERIGON AMERIGON AMERIGON
1415 STRIKER ASSY-DOOR 2 COP AMERIGON AMERIGON AMERIGON AMERIGON
1416 ROD DOOR INSIDE HANDLE, 0 XXX XXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XX
0000 ROD DOOR INSIDE HANDLE, 0 XXX XXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XX
0000 ROD DOOR SAFETY LOCK, 1 NEW STEEL AMERIGON AMERIGON AMERIGON AMERIGON
LH
1419 ROD DOOR SAFETY LOCK, 1 NEW STEEL AMERIGON AMERIGON AMERIGON AMERIGON
RH
1420 KNOB-DR SAFETY LOCK, LH 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
__________________________________________________________________________________________________________________________________
PAGE 2 OF 15
-------------------------
* Confidential portions omitted and filed separately with the Commission.
DETAIL PARTS BODY
&
PROCUREMENT RESPONSIBILITY
__________________________________________________________________________________________________________________________________
LIMITED PRODUCT
_____________________________________________
1000 BODY QTY COP/NEW MATERIAL PROCESS ENGINEERING TOOLS PROTO(2) PARTS(48) REMARKS
___ ____________________ ___ _______ ________ ________ ___________ ________ ________ _________ _______________
1421 KNOB-DOOR SAFETY 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXX, XX
0000 HANDLE ASSY-DOOR 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXX, XX
0000 HANDLE ASSY-DOOR 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXX, XX
0000 HANDLE ASSY-DOOR 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXX, XX
0000 HANDLE ASSY-DOOR 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XXXXXXX, XX
0000 CHECKER ASSY-DOOR, 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XX
0000 CHECKER ASSY-DOOR, XX 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 GLASS-DOOR DROP, LH 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 GLASS-DOOR DROP, RH 1 NEW AMERIGON AMERIGON AMERIGON AMERIGON
1430 CHANNEL-DOOR QUADRANT, 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XX
0000 CHANNEL-DOOR QUADRANT, 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
XX
0000 RUN ASSY-DOOR GLASS, LH 1 COP/ AMERIGON AMERIGON AMERIGON AMERIGON
MODIFY
1429 RUN ASSY-DOOR GLASS, RH 1 COP/ AMERIGON AMERIGON AMERIGON AMERIGON
MODIFY
1430 CHANNEL-DOOR GUIDE, LH 1 COP/ AMERIGON AMERIGON AMERIGON AMERIGON
MODIFY
1431 CHANNEL-DOOR GUIDE, RH 1 COP/ AMERIGON AMERIGON AMERIGON AMERIGON
MODIFY
1432 WEATHER STRIP-BODY 1 COP/ AMERIGON AMERIGON AMERIGON AMERIGON
SIDE, LH MODIFY
1433 WEATHER STRIP-BODY 1 COP/ AMERIGON AMERIGON AMERIGON AMERIGON
SIDE, RH MODIFY
1434 WEATHER STRIP-DOOR 1 COP/ AMERIGON AMERIGON AMERIGON AMERIGON
SIDE, LH MODIFY
1435 WEATHER STRIP-DOOR 1 COP/ AMERIGON AMERIGON AMERIGON AMERIGON
SIDE, RH MODIFY
1436 WEATHER STRIP ASSY-BELT 1 COP/ AMERIGON AMERIGON AMERIGON AMERIGON
OUTSIDE, LH MODIFY
1437 WEATHER STRIP ASSY-BELT 1 COP/ AMERIGON AMERIGON AMERIGON AMERIGON
OUTSIDE, RH MODIFY
1438 WEATHER STRIP-BELT 1 COP/ AMERIGON AMERIGON AMERIGON AMERIGON
INSIDE, LH MODIFY
1439 WEATHER STRIP-BELT 1 COP/ AMERIGON AMERIGON AMERIGON AMERIGON
INSIDE, RH MODIFY
1440 PANEL ASSY-DOOR TRIM, 1 NEW WOOD AMERIGON AMERIGON AMERIGON AMERIGON
LH STOCK/
FRP
1441 PANEL ASSY-DOOR TRIM, 1 NEW WOOD AMERIGON AMERIGON AMERIGON AMERIGON
RH STOCK/
FRP
1442 PANEL ASSY-DOOR UPPER 1 NEW CLOTH AMERIGON AMERIGON AMERIGON AMERIGON
TRIM, RH
1143 PANEL ASSY-DOOR UPPER 1 NEW CLOTH AMERIGON AMERIGON AMERIGON AMERIGON
TRIM, LH
1444 MAP POCKET-FRONT DOOR 1 NEW ABS AMERIGON AMERIGON AMERIGON AMERIGON
TRIM, LH
__________________________________________________________________________________________________________________________________
PAGE 3 OF 15
DETAIL PARTS BODY
&
PROCUREMENT RESPONSIBILITY
LIMITED PRODUCT
---------------------------------------------------
1000 BODY QTY COP/NEW MATERIAL PROCESS ENGINEERING TOOLS PROTO(2) PARTS(48) REMARKS
---- --------- ---- --------- ---------- --------- ------------- ------- -------- --------- -------
1445 MAP POCKET-FRONT DOOR TRIM, RH 1 NEW ABS AMERIGON AMERIGON AMERIGON AMERIGON
1446 SEAL-DOOR TRIM, LH 1 NEW VINYL AMERIGON AMERIGON AMERIGON AMERIGON
1447 SEAL-DOOR TRIM, RH 1 NEW VINYL AMERIGON AMERIGON AMERIGON AMERIGON
1448 HANDLE ASSY-DOOR GRIP, LH 1 NEW AMERIGON AMERIGON AMERIGON AMERIGON
1449 HANDLE ASSY-DOOR GRIP, RH 1 NEW AMERIGON AMERIGON AMERIGON AMERIGON
1500 TAIL GATE
1501 PANEL-TAIL GATE OUTER 1 NEW FRP RTM AMERIGON AMERIGON AMERIGON * SEE RTM NOTE
1502 PANEL-TAIL GATE INNER 1 NEW FRP RTM AMERIGON AMERIGON AMERIGON *
1503 HINGE ASSY-TAIL GATE, LH 1 COP/NEW AMERIGON AMERIGON AMERIGON AMERIGON
1504 HINGE ASSY-TAIL GATE, RH 1 COP/NEW AMERIGON AMERIGON AMERIGON AMERIGON
1505 BUMPER-TAIL GATE OVER SLAM 2 COP AMERIGON AMERIGON AMERIGON AMERIGON
1504 LIFTER-TAIL GATE 2 COP AMERIGON AMERIGON AMERIGON AMERIGON
1505 STRIKER ASSY-TAIL GATE 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
1506 LATCH ASSY-TAIL GATE 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
1507 DOOR ASSY-BATTERY RECHARGE 1 NEW FRP AMERIGON AMERIGON AMERIGON *
1508 BUMPER-BATTERY RECHARGE
OVER SLAM 2 COP RUBBER AMERIGON AMERIGON AMERIGON AMERIGON
1509 BATTERY RECHARGE DOOR LOCK SYS. * COP AMERIGON AMERIGON AMERIGON AMERIGON INCLUDE CABLE
1510 WEATHER STRIP-TAIL GATE 1 COP/MODIFY AMERIGON AMERIGON AMERIGON AMERIGON
1600 KEY SET
1601 KEY SET 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
PAGE 4 OF 15
-------------------------
* Confidential portions omitted and filed separately with the Commission.
DETAIL PARTS INTERIOR TRIM
&
PROCUREMENT RESPONSIBILITY
LIMITED PRODUCT
---------------------------------------
2000 INTERIOR TRIM QTY COP/NEW MATERIAL PROCESS ENGINEERING TOOLS PROTO(2) PARTS(48) REMARKS
---- ----------------- --- ------ -------- ------- ----------- -------- -------- -------- -------
2100 INSTRUMENT PANEL
2101 INSTRUMENT PANEL ASSY 1 NEW ABS/PC OR PP INJECTION AMERIGON AMERIGON AMERIGON AMERIGON
2102 GLOVE BOX ASSY 1 NEW ABS OR PP INJECTION AMERIGON AMERIGON AMERIGON AMERIGON
2103 LOCK ASSY-GLOVE BOX 1 COP AMERIGON AMERIGON AMERIGON AMERIGON W/O KEY
2104 CLUSTER FACIA PANEL 1 NEW ABS VACUUM FORM'G AMERIGON AMERIGON AMERIGON AMERIGON
2105 CENTER FACIA PANEL 1 NEW ABS * WANTS INJ. AMERIGON AMERIGON AMERIGON AMERIGON
2106 TRAY-CTR FACIA 1 NEW ABS * WANTS INJ. AMERIGON AMERIGON AMERIGON AMERIGON PUSH & SLIDING
2107 SHROUD-STEERING COLUMN - UPR 1 COP/NEW PP OR ABS VAC CAST/FORM AMERIGON AMERIGON AMERIGON AMERIGON
2108 SHROUD-STEERING COLUMN - LWR 1 COP/NEW PP OR ABS VAC CAST/FORM AMERIGON AMERIGON AMERIGON AMERIGON
2109 CONSOLE ASSY 1 NEW ABS VAC CAST/FORM AMERIGON AMERIGON AMERIGON *
2200 SIDE TRIM
2201 FR & CTR PLR TRIM ASSY - LH 1 NEW ABS VACUUM FORM'G AMERIGON AMERIGON AMERIGON AMERIGON
0000 XX & XXX XXX XXXX XXXX - XX 0 NEW ABS VACUUM FORM'G AMERIGON AMERIGON AMERIGON AMERIGON
2203 QTR INR TRIM ASSY - LH 1 NEW ABS VACUUM FORM'G AMERIGON AMERIGON AMERIGON AMERIGON
2204 QTR INR TRIM ASSY - RH 1 NEW ABS VACUUM FORM'G AMERIGON AMERIGON AMERIGON AMERIGON
2205 QTR INR CTR TRIM ASSY - LH 1 NEW ABS + CLOTH VACUUM FORM'G AMERIGON AMERIGON AMERIGON AMERIGON CLOTH COVER'G
2206 QTR INR CTR TRIM ASSY - RH 1 NEW ABS + CLOTH VACUUM FORM'G AMERIGON AMERIGON AMERIGON AMERIGON CLOTH COVER'G
2207 COWL SIDE TRIM ASSY - LH 1 NEW ABS VACUUM FORM'G AMERIGON AMERIGON AMERIGON AMERIGON
2208 COWL SIDE TRIM ASSY - RH 1 NEW ABS VACUUM FORM'G AMERIGON AMERIGON AMERIGON AMERIGON
2209 DR SCUFF TRIM ASSY - LH 1 NEW ABS VACUUM FORM'G AMERIGON AMERIGON AMERIGON AMERIGON
2210 DR SCUFF TRIM ASSY - RH 1 NEW ABS VACUUM FORM'G AMERIGON AMERIGON AMERIGON AMERIGON
2211 REAR PLR TRIM ASSY - LH 1 NEW ABS VACUUM FORM'G AMERIGON AMERIGON AMERIGON AMERIGON
2212 REAR PLR TRIM ASSY - RH 1 NEW ABS VACUUM FORM'G AMERIGON AMERIGON AMERIGON AMERIGON
2300 ROOF TRIM
2301 HEAD LINING ASSY 1 NEW CLOTH HOT PRESS AMERIGON AMERIGON AMERIGON AMERIGON
2302 ASSIST HANDLE ASSY 1 COP RETRACT. TYPE AMERIGON AMERIGON AMERIGON AMERIGON
2303 SUN VISOR ASSY - LH 1 COP MEET TO H/LING AMERIGON AMERIGON AMERIGON *
2304 SUN VISOR ASSY - RH 1 COP MEET TO H/LING AMERIGON AMERIGON AMERIGON *
PAGE 5 OF 15
-------------------------
* Confidential portions omitted and filed separately with the Commission.
DETAIL PARTS INTERIOR TRIM
&
PROCUREMENT RESPONSIBILITY
LIMITED PRODUCT
-------------------------------------
2000 INTERIOR TRIM QTY COP/NEW MATERIAL PROCESS ENGINEERING TOOLS PROTO(2) PARTS(48) REMARKS
---- --------------- --- ------- ----------- -------- ----------- ----- ------- -------- --------
2400 TRUNK TRIM
2401 REAR SHELF CENTER TRIM 1 NEW W/STOCK + W/PAPER HOT PRESS AMERIGON AMERIGON AMERIGON AMERIGON W/STOCK;WOODSTOCK
2402 LUGGAGE SIDE TRIM ASSY - LH 1 NEW BOARD + W/PAPER HOT PRESS AMERIGON AMERIGON AMERIGON AMERIGON
2403 LUGGAGE SIDE TRIM ASSY - RH 1 NEW BOARD + W/PAPER HOT PRESS AMERIGON AMERIGON AMERIGON AMERIGON
2404 LUGGAGE REAR TRIM ASSY 1 NEW BOARD + W/PAPER HOT PRESS AMERIGON AMERIGON AMERIGON AMERIGON
2405 LUGGAGE MAT 1 NEW W/PAPER TRIM'G OR CUT'G AMERIGON AMERIGON AMERIGON AMERIGON
2500 FLOOR & BRACKETS
2501 FLOOR CARPET ASSY 1 NEW NEEDLE TYPE HOT PRESS AMERIGON AMERIGON AMERIGON AMERIGON
2502 BRACKET-CLUSATER GAUGE MTG.LH 1 NEW SPCC PRESS AMERIGON AMERIGON AMERIGON AMERIGON SUPPORT TO I/P
2503 BRACKET-CLUSATER GAUGE MTG.RH 1 NEW SPCC PRESS AMERIGON AMERIGON AMERIGON AMERIGON SUPPORT TO I/P
2504 BRACKET-GL/BOX HINGE MTG 1 NEW SPCC PRESS AMERIGON AMERIGON AMERIGON AMERIGON SUPPORT TO GL/BOX
2505 STRIKER ASSY-GL/BOX 1 COP/NEW SM2SC PRESS AMERIGON AMERIGON AMERIGON AMERIGON
2506 BRACKET ASSY-CTR SUPPORT 1 NEW SPCC PRESS AMERIGON AMERIGON AMERIGON AMERIGON SUPPORT TO I/P
2600 VENTILATION
2601 NOZZLE ASSY-DEFROSTER 1 COP ABS AMERIGON AMERIGON AMERIGON AMERIGON * TO APPROVE
2602 NOZZLE ASSY-DEFROSTER SIDE, LH 1 COP ABS AMERIGON AMERIGON AMERIGON AMERIGON STYLING
2603 NOZZLE ASSY-DEFROSTER SIDE, RH 1 COP ABS AMERIGON AMERIGON AMERIGON AMERIGON
2604 VENT LOUVER ASSY-CTR 1 COP ABS AMERIGON AMERIGON AMERIGON AMERIGON
2605 VENT LOUVER ASSY-SIDE, LH 1 COP ABS AMERIGON AMERIGON AMERIGON AMERIGON
2606 VENT LOUVER ASSY-SIDE, RH 1 COP ABS AMERIGON AMERIGON AMERIGON AMERIGON
2607 HOSE ASSY-SIDE DEFROSTER, LH 1 NEW PP AMERIGON AMERIGON AMERIGON AMERIGON USE BEST PROCESS
2608 HOSE ASSY-SIDE DEFROSTER, RH 1 NEW PP AMERIGON AMERIGON AMERIGON AMERIGON USE BEST PROCESS
2609 DUCT ASSY-CTR AIR VENT 1 NEW ABS AMERIGON AMERIGON AMERIGON AMERIGON USE BEST PROCESS
2610 DUCT ASSY-SIDE AIR VENT, LH 1 NEW ABS AMERIGON AMERIGON AMERIGON AMERIGON USE BEST PROCESS
0000 XXXX XXXX-XXXX XXX XXXX, XX 0 NEW ABS AMERIGON AMERIGON AMERIGON AMERIGON USE BEST PROCESS
2612 HEATER CONTROL COP AMERIGON AMERIGON AMERIGON AMERIGON
2613 HEATER ASSY COP AMERIGON AMERIGON AMERIGON AMERIGON ELECTRIC
PAGE 6 OF 15
-------------------------
* Confidential portions omitted and filed separately with the Commission.
DETAIL PARTS INTERIOR TRIM
&
PROCUREMENT RESPONSIBILITY
LIMITED PRODUCT
----------------------------------------------------
2000 INTERIOR TRIM QTY COP/NEW MATERIAL PROCESS ENGINEERING TOOLS PROTO(2) PARTS(48) REMARKS
---- ------------- --- ------- -------- ------- ----------- ----- -------- --------- -------
2700 SEAT
2701 FRONT SEAT ASSY, LH 1 COP/MODIFY AMERIGON AMERIGON AMERIGON AMERIGON
2702 FRONT SEAT ASSY, RH 1 COP/MODIFY AMERIGON AMERIGON AMERIGON AMERIGON
2703 HEAD REST ASSY 2 COP/MODIFY AMERIGON AMERIGON AMERIGON AMERIGON
2704 CUSHION ASSY-REAR SEAT 1 COP/MODIFY AMERIGON AMERIGON AMERIGON AMERIGON
2705 BACK ASSY-REAR SEAT 1 COP/MODIFY AMERIGON AMERIGON AMERIGON AMERIGON
2800 SEAT BELT
2801 BELT ASSY-FRONT SEAT, LH 1 COP AMERIGON AMERIGON * * ELR 3PT
2802 BELT ASSY-FRONT SEAT, RH 1 COP AMERIGON AMERIGON * * ELR 3PT
2803 BELT ASSY-FRONT SEAT, LH 1 COP AMERIGON AMERIGON * * ELR 3PT
2804 BELT ASSY-FRONT SEAT, RH 1 COP AMERIGON AMERIGON * * ELR 3PT
PAGE 7 OF 15
-------------------------
* Confidential portions omitted and filed separately with the Commission.
DETAIL PARTS EXTERIOR TRIM
&
PROCUREMENT RESPONSIBILITY
3000 EXTERIOR TRIM QTY COP/NEW MATERIAL PROCESS
---- ------------- --- ------- -------- -------
3100 LAMP
3101 LAMP ASSY-HEAD, LH (WITH T/SIGNAL) 1 NEW LENS:PC LENS:INJECTION
3102 LAMP ASSY-HEAD, RH (WITH T/SIGNAL) 1 HGS:VACUUM CAST'G
3103 LAMP ASSY-FRONT FOG 2 NEW/COP
3104 LAMP ASSY REAR COMB, LH 1 NEW LENS:ACRYL LENS:INJECTION
0000 XXXX XXXX XXXX XXXX, XX 0 HGS:VACUUM CAST'G
3106 LAMP ASSY-LICENSE PLATE 2 COP
3200 MIRROR & GLASS
3201 MIRROR ASSY-INSIDE REAR VIEW 1 COP
3202 MIRROR ASSY-OUTSIDE REAR VIEW, LH 1 COP/MODIFY BASE PLATE:NEW OR
3203 MIRROR ASSY-OUTSIDE REAR VIEW, RH 1 MODIFY
3204 GLASS ASSY-WINDSHIELD 1 NEW GLASS
3205 GLASS ASSY-TAIL GATE 1 NEW GLASS
3206 GLASS ASSY-FIXED GLASS, LH/RH 1/1 NEW GLASS
3207 COVER ASSY-COWL TOP 1 COP/NEW ABS OR PP VACUUM CASTING
3208 MOULD'G ASSY-WINDSHIELD GLASS 1 COP/NEW PVC EXTRUSION
3209 MOULD'G ASSY-TAIL GATE 1 COP/NEW PVC EXTRUSION
3210 MOULD'G ASSY-FIXED GLASS, LH/RH 1/1 COP/NEW PVC EXTRUSION
3300 BUMPER
3301 COVER-FRONT BUMPER 1 NEW TPO INJECTION OR ?
3302 RAIL-FRONT BUMPER 1 NEW AL
3303 COVER-REAR BUMPER 1 NEW TPO INJECTION OR ?
3304 RAIL-REAR BUMPER 1 NEW AL
3400 WIPER & WASHER
3401 WIPER ASSY-WINDSHIELD (WITH LINKAGE) 1 COP/MODIFY
3402 WASHER ASSY-WINDSHIELD 1 COP
3403 RESERVOIR ASSY-WINDSHIELD WASHER 1 COP
LIMITED PRODUCT
-------------------------------------------------------------
ENGINEERING TOOLS PROTO(2) PARTS(48) REMARKS
----------- ----- -------- --------- -------
AMERIGON AMERIGON AMERIGON AMERIGON ECE 20.02
AMERIGON AMERIGON AMERIGON AMERIGON
AMERIGON AMERIGON AMERIGON AMERIGON NEW LENS & MAT[cad 146]L
STYLING
AMERIGON AMERIGON AMERIGON AMERIGON
AMERIGON AMERIGON AMERIGON AMERIGON
AMERIGON AMERIGON AMERIGON AMERIGON
AMERIGON AMERIGON AMERIGON * MEET TO STYLING
AMERIGON AMERIGON AMERIGON AMERIGON
AMERIGON AMERIGON AMERIGON AMERIGON MEET TO STYLING
AMERIGON AMERIGON AMERIGON AMERIGON LAMINATED
AMERIGON AMERIGON AMERIGON AMERIGON TEMPERED
AMERIGON AMERIGON AMERIGON AMERIGON TEMPERED
AMERIGON AMERIGON AMERIGON *
AMERIGON AMERIGON AMERIGON AMERIGON * TO CONFIRM
AMERIGON AMERIGON AMERIGON AMERIGON * TO CONFIRM
AMERIGON AMERIGON AMERIGON AMERIGON * TO CONFIRM
AMERIGON AMERIGON AMERIGON AMERIGON FMVSS 215
AMERIGON AMERIGON AMERIGON AMERIGON FRONT END FRAME
AMERIGON AMERIGON AMERIGON AMERIGON FMVSS 215
AMERIGON AMERIGON AMERIGON AMERIGON REAR END FRAME
AMERIGON AMERIGON AMERIGON AMERIGON 2 SPEED INTERM'T
AMERIGON AMERIGON AMERIGON *
AMERIGON AMERIGON AMERIGON * WITH HOSE ASSY
PAGE 8 OF 15
-------------------------
* Confidential portions omitted and filed separately with the Commission.
DETAIL PARTS INTERIOR TRIM
&
PROCUREMENT RESPONSIBILITY
LIMITED PRODUCT
----------------------------------------------
3000 EXTERIOR TRIM QTY COP/NEW MATERIAL PROCESS ENGINEERING TOOLS PROTO(2) PARTS(48) REMARKS
---- ------------- --- ------- -------- ------- ----------- ----- -------- --------- -------
3500 TRIM
3501 EMBLEM 1 NEW TAPE * * * * DESIGN BY *
3502 WHEEL GUARD-FRONT, LH 1 NEW PE VACUUM FORMING AMERIGON AMERIGON AMERIGON *
3503 WHEEL GUARD-FRONT, RH 1 NEW PE VACUUM FORMING AMERIGON AMERIGON AMERIGON *
3504 WHEEL GUARD-REAR, LH 1 NEW PE VACUUM FORMING AMERIGON AMERIGON AMERIGON *
3505 WHEEL GUARD-REAR, RH 1 NEW PE VACUUM FORMING AMERIGON AMERIGON AMERIGON *
3506 MUD GUARD-FRONT, LH/RH 1/1 NEW/COP VACUUM FORMING AMERIGON AMERIGON AMERIGON * MEET TO STYLING
3507 MUD GUARD-FRONT, LH/RH 1/1 NEW/COP VACUUM FORMING AMERIGON AMERIGON AMERIGON * MEET TO STYLING
PAGE 9 OF 15
-------------------------
* Confidential portions omitted and filed separately with the Commission.
DETAIL PARTS POWER TRAIN
&
PROCUREMENT RESPONSIBILITY
LIMITED PRODUCT
5000 POWER TRAIN QTY COP/NEW MATERIAL PROCESS ENGINEERING TOOLS PROTO(2)
5001 TRANS AXLE ASSY-MANUAL 1 COP/NEW AMERIGON AMERIGON AMERIGON
5002 PINION-SPEEDOMETER 1 COP PLASTIC OR STEEL INJECTION AMERIGON AMERIGON AMERIGON
5003 RING-LOCK, SPEEDOMETER PINION 1 COP PLASTIC OR STEEL INJECTION AMERIGON AMERIGON AMERIGON
5004 SEAL-O RING, SPEEDOMETER PINION 1 COP RUBBER INJECTION AMERIGON AMERIGON AMERIGON
5005 COUPLING-INPUT SHAFT, TRANS 1 COP/NEW OVER X00X XXXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 ADAPTER PLATE-CLUTCH HOUSING 1 NEW AL CAST'G/MACHIN'G AMERIGON AMERIGON AMERIGON
5007 DOWEL PIN-BLOCK TO TRANSMISSION 2 COP/NEW SICC MACHINING AMERIGON AMERIGON AMERIGON
5008 BRACKET & INSULATOR ASSY(MOTOR & T/M) 3-4 COP/MODIFY STEEL-RUBBER AMERIGON AMERIGON AMERIGON
5000 POWER TRAIN PARTS(48) REMARKS
5001 TRANS AXLE ASSY-MANUAL AMERIGON
5002 PINION-SPEEDOMETER AMERIGON ABLE TO CHANGE WITH
5003 RING-LOCK, SPEEDOMETER PINION AMERIGON SPEEDO METER GEAR
5004 SEAL-O RING, SPEEDOMETER PINION AMERIGON ASSY-COP PART ONLY
5005 COUPLING-INPUT SHAFT, TRANS AMERIGON
5006 ADAPTER PLATE-CLUTCH HOUSING AMERIGON
5007 DOWEL PIN-BLOCK TO TRANSMISSION AMERIGON
5008 BRACKET & INSULATOR ASSY(MOTOR & T/M) AMERIGON BRACKET;MODIFY
PAGE 10 OF 15
DETAIL PARTS CHASSIS
&
PROCUREMENT RESPONSIBILITY
LIMITED PRODUCT
6000 CHASSIS QTY COP/NEW MATERIAL PROCESS ENGINEERING TOOLS PROTO(2)
6100 BRAKE
6101 FRONT WHEEL BRAKE ASSY, LH 1 COP AMERIGON AMERIGON AMERIGON
6102 FRONT WHEEL BRAKE ASSY, RH 1 COP AMERIGON AMERIGON AMERIGON
6103 REAR WHEEL BRAKE ASSY, LH 1 COP AMERIGON AMERIGON AMERIGON
6104 REAR WHEEL BRAKE ASSY, RH 1 COP AMERIGON AMERIGON AMERIGON
6105 BRAKE PEDAL ASSY 1 COP AMERIGON AMERIGON AMERIGON
6106 BRAKE MASTER CYLINDER & BOOSTER 1 COP AMERIGON AMERIGON AMERIGON
6107 BRAKE FLUID LINE 1 COP/MODIFY AMERIGON AMERIGON AMERIGON
6108 VACUUM HOSE 1 COP/MODIFY AMERIGON AMERIGON AMERIGON
6109 VACUUM PUMP 1 COP AMERIGON AMERIGON AMERIGON
6110 VACUUM PUMP MOUNT'G BRACKET 1 NEW AL AMERIGON AMERIGON AMERIGON
6111 PARKING BRAKE & CABLE 1 COP/MODIFY AMERIGON AMERIGON AMERIGON
6200 SUSPENSION
6201 FRONT HUB & KNUCKLE ASSY, LH 1 COP AMERIGON AMERIGON AMERIGON
6202 FRONT HUB & KNUCKLE ASSY, RH 1 COP AMERIGON AMERIGON AMERIGON
6203 FRONT STRUT ASSY, LH 1 COP AMERIGON AMERIGON AMERIGON
6204 FRONT STRUT ASSY, RH 1 COP AMERIGON AMERIGON AMERIGON
6205 LOWER ARM 1 COP AMERIGON AMERIGON AMERIGON
6206 XXXXXXXXXX XXX 0 XXX/XXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 CROSS MEMBER 1 COP AMERIGON AMERIGON AMERIGON
6208 REAR AXLE ASSY, LH 1 COP AMERIGON AMERIGON AMERIGON
6209 REAR AXLE ASSY, RH 1 COP AMERIGON AMERIGON AMERIGON
6210 REAR STRUT ASSY, LH 1 COP AMERIGON AMERIGON AMERIGON
6211 REAR STRUT ASSY, RH 1 COP AMERIGON AMERIGON AMERIGON
6212 REAR SUSPENSION CONTROL ARM * COP AMERIGON AMERIGON AMERIGON
6000 CHASIS PARTS(48) REMARKS
6100 BRAKE
6101 FRONT WHEEL BRAKE ASSY, LH *
6102 FRONT WHEEL BRAKE ASSY, RH *
6103 REAR WHEEL BRAKE ASSY, LH *
6104 REAR WHEEL BRAKE ASSY, RH *
6105 BRAKE PEDAL ASSY *
6106 BRAKE MASTER CYLINDER & BOOSTER *
6107 BRAKE FLUID LINE *
6108 VACUUM HOSE AMERIGON SAME AS EV ITEM
6109 VACUUM PUMP AMERIGON SAME AS EV ITEM
6110 VACUUM PUMP MOUNT'G BRACKET AMERIGON
6111 PARKING BRAKE & CABLE *
6200 SUSPENSION
6201 FRONT HUB & KNUCKLE ASSY, LH *
6202 FRONT HUB & KNUCKLE ASSY, RH *
6203 FRONT STRUT ASSY, LH * AMERIGON SUPPLY ALL SPRINGS
6204 FRONT STRUT ASSY, RH * AMERIGON SUPPLY ALL SPRINGS
6205 LOWER ARM *
6206 STABILIZER BAR AMERIGON
6207 CROSS MEMBER *
6208 REAR AXLE ASSY, LH *
6209 REAR AXLE ASSY, RH *
6210 REAR STRUT ASSY, LH * AMERIGON SUPPLY ALL SPRINGS
6211 REAR STRUT ASSY, RH * AMERIGON SUPPLY ALL SPRINGS
6212 REAR SUSPENSION CONTROL ARM *
PAGE 11 OF 15
-------------------------
* Confidential portions omitted and filed separately with the Commission.
DETAIL PARTS CHASSIS
&
PROCUREMENT RESPONSIBILITY
LIMITED PRODUCT
6000 CHASSIS QTY COP/NEW MATERIAL PROCESS ENGINEERING TOOLS PROTO(2)
6300 STEERING
6301 STEERING WHEEL 1 COP/MODIFY AMERIGON AMERIGON AMERIGON
6302 STEERING COLUMN & SHAFT 1 COP/MODIFY AMERIGON AMERIGON AMERIGON
6303 POWER STEERING GEAR XXX 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 POWER STEERING PUMP 1 COP AMERIGON AMERIGON AMERIGON
6305 POWER STEERING PUMP MOUNT'G BRACKET * NEW AMERIGON AMERIGON AMERIGON
6306 POWER STEERING HOSE * COP/MODIFY AMERIGON AMERIGON AMERIGON
6307 POWER STEERING MOTOR 1 COP AMERIGON AMERIGON AMERIGON
6308 POWER STEERING MOTOR MOUNT'G BRACKET 1 NEW AMERIGON AMERIGON AMERIGON
6309 ACCEL. PEDAL & CABLE ASSY * COP/MODIFY AMERIGON AMERIGON AMERIGON
6400 DRIVE SHAFT
6401 DRIVE SHAFT, LH COP/NEW AMERIGON AMERIGON AMERIGON
6402 DRIVE SHAFT, RH COP/NEW AMERIGON AMERIGON AMERIGON
6500 WHEEL & TIRE
6501 WHEEL 4 COP AMERIGON AMERIGON AMERIGON
6502 WHEEL COVER 4 COP AMERIGON AMERIGON AMERIGON
6503 TIRE 4 COP AMERIGON AMERIGON AMERIGON
6504 TEMPORARY TIRE 1 COP AMERIGON AMERIGON AMERIGON
6000 CHASIS PARTS(48) REMARKS
6300 STEERING
6301 STEERING WHEEL *
6302 STEERING COLUMN & SHAFT *
6303 POWER STEERING GEAR BOX *
6304 POWER STEERING PUMP AMERIGON
6305 POWER STEERING PUMP MOUNT'G BRACKET AMERIGON
6306 POWER STEERING HOSE *
6307 POWER STEERING MOTOR AMERIGON SAME AS EV ITEM
6308 POWER STEERING MOTOR MOUNT'G BRACKET AMERIGON
6309 ACCEL. PEDAL & CABLE ASSY *
6400 DRIVE SHAFT
6401 DRIVE SHAFT, LH * AMERIGON SUPPLY IF NEW
6402 DRIVE SHAFT, RH * AMERIGON SUPPLY IF NEW
6500 WHEEL & TIRE
6501 WHEEL *
6502 WHEEL COVER * REVIEW FOR STYLING
6503 TIRE *
6504 TEMPORARY TIRE *
PAGE 12 OF 15
-------------------------
* Confidential portions omitted and filed separately with the Commission.
DETAIL PARTS ELECTRIC
&
PROCUREMENT RESPONSIBILITY
LIMITED PRODUCT
---------------------------------------------
7000 ELECTRIC QTY COP/NEW MATERIAL PROCESS ENGINEERING TOOLS PROTO(2) PARTS(48)
---- -------- --- ------- -------- ------- ----------- -------- -------- ---------
7001 HARNESS ASSY - MAIN 1 NEW
7002 HARNESS ASSY - ENGINE ROOM 1 NEW AMERIGON AMERIGON AMERIGON *
7003 HARNESS ASSY - INSTRUMENT 1 NEW AMERIGON AMERIGON AMERIGON *
7004 HARNESS ASSY - TRUNK ROOM 1 NEW AMERIGON AMERIGON AMERIGON *
7005 HARNESS ASSY - ROOM LAMP 1 NEW AMERIGON AMERIGON AMERIGON *
7006 HARNESS ASSY - DOOR (DRIVE) 1 NEW AMERIGON AMERIGON AMERIGON *
7007 HARNESS ASSY - DOOR (ASSIST) 1 NEW AMERIGON AMERIGON AMERIGON *
7008 HARNESS ASSY - CONTROL 1 NEW AMERIGON AMERIGON AMERIGON *
7009 BATTERY 1 COP AMERIGON AMERIGON AMERIGON *
7010 BATTERY MOUNTING 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
7011 SWITCH ASSY - COMBINATION 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
7012 SWITCH ASSY - FOG LAMP 1 COP/NEW AMERIGON AMERIGON AMERIGON AMERIGON
7013 SWITCH ASSY - STOP LAMP 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
7014 SWITCH ASSY - POWER WINDOW (O) 1 COP/NEW AMERIGON AMERIGON AMERIGON AMERIGON
7015 SWITCH ASSY - POWER WINDOW (A) 1 COP/NEW AMERIGON AMERIGON AMERIGON AMERIGON
7016 SWITCH ASSY - HAZARD 1 COP/NEW AMERIGON AMERIGON AMERIGON AMERIGON
7017 SWITCH ASSY - DOOR (D) 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
7018 SWITCH ASSY - DOOR (A) 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
7019 SWITCH ASSY - REAR HEATED 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
7020 SWITCH ASSY - DIRECTION 1 COP/NEW AMERIGON AMERIGON AMERIGON AMERIGON
7021 SWITCH ASSY - EMERGENCY 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
7022 COVER - DOOR SWITCH 2 COP AMERIGON AMERIGON AMERIGON AMERIGON
7023 LIGHTER COMPL. - CIGARETTE 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
7024 RELAY 5 COP AMERIGON AMERIGON AMERIGON *
7025 LAMP ASSY - ROOM 1 COP/NEW AMERIGON AMERIGON AMERIGON AMERIGON
7026 MOTOR ASSY - WINDSHIELD WIPER 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
7027 MOTOR ASSY - WINDSHIELD WASHER 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
7028 MOTOR ASSY - POWER WINDOW (LH) 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
7029 MOTOR ASSY - POWER WINDOW (RH) 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
7030 AUDIO ASSY - ETR 1 COP AMERIGON AMERIGON * *
7031 ANTENNA ASSY - ROD 1 COP AMERIGON AMERIGON * *
7032 SPEAKER ASSY - DOOR 2 COP AMERIGON AMERIGON * *
7000 ELECTRIC REMARKS
---- -------- -------
7001 HARNESS ASSY - MAIN
7002 HARNESS ASSY - ENGINE ROOM AMERIGON TO SUPPLY
7003 HARNESS ASSY - INSTRUMENT CONNECTORS & F. BOX
7004 HARNESS ASSY - TRUNK ROOM DETAIL DRWGS, PLUS
7005 HARNESS ASSY - ROOM LAMP MASTER HARNESS
7006 HARNESS ASSY - DOOR (DRIVE) PLUS WIRE LENGTHS
7007 HARNESS ASSY - DOOR (ASSIST)
7008 HARNESS ASSY - CONTROL
7009 BATTERY
7010 BATTERY MOUNTING
7011 SWITCH ASSY - COMBINATION MULTI-FUNCTION SW
7012 SWITCH ASSY - FOG LAMP * TO APPROVE
7013 SWITCH ASSY - STOP LAMP ALL SWITCH ASSYS.
7014 SWITCH ASSY - POWER WINDOW (D) DRIVE
7015 SWITCH ASSY - POWER WINDOW (A) ASSIST
7016 SWITCH ASSY - HAZARD
7017 SWITCH ASSY - DOOR (D)
7018 SWITCH ASSY - DOOR (A)
7019 SWITCH ASSY - REAR HEATED
7020 SWITCH ASSY - DIRECTION PRND SWITCH
7021 SWITCH ASSY - EMERGENCY
7022 COVER - DOOR SWITCH RUBBER
7023 LIGHTER COMPL. - CIGARETTE
7024 RELAY
7025 LAMP ASSY - ROOM
7026 MOTOR ASSY - WINDSHIELD WIPER
7027 MOTOR ASSY - WINDSHIELD WASHER
7028 MOTOR ASSY - POWER WINDOW (LH) SWITCH ON CONSOLE
7029 MOTOR ASSY - POWER WINDOW (RH)
7030 AUDIO ASSY - ETR SUPPLIER: *
7031 ANTENNA ASSY - ROD SUPPLIER: *
7032 SPEAKER ASSY - DOOR SUPPLIER: *
PAGE 13 OF 15
-------------------------
* Confidential portions omitted and filed separately with the Commission.
DETAIL PARTS ELECTRIC
&
PROCUREMENT RESPONSIBILITY
LIMITED PRODUCT
------------------------------------------------
7000 ELECTRIC QTY COP/NEW MATERIAL PROCESS ENGINEERING TOOLS PROTO(2) PARTS(48)
---- -------- --- ------- -------- ------- ----------- -------- -------- ---------
7033 SPEAKER GRILLE - DOOR 2 COP/NEW AMERIGON AMERIGON AMERIGON AMERIGON
7034 CLUSTER ASSY - INSTRUMENT 1 COP/NEW AMERIGON AMERIGON AMERIGON AMERIGON
7035 SPEED SENSOR 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 INTERMITTENT WIPER RELAY 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 FLASHER ASSY - COMBINATION 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
7038 SEAT BELT TIMER 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
7039 FLASHER ASSY - COMBINATION 1 COP AMERIGON AMERIGON AMERIGON AMERIGON
7040 HORN ASSY - HIGH 1 COP AMERIGON AMERIGON AMERIGON *
7041 DIGITAL CLOCK 1 COP/NEW AMERIGON AMERIGON AMERIGON AMERIGON
7000 ELECTRIC REMARKS
---- -------- -----------------------
7033 SPEAKER GRILLE - DOOR
7034 CLUSTER ASSY - INSTRUMENT * TO APPROVE
7035 SPEED SENSOR CABLELESS TYPE
7036 INTERMITTENT WIPER DELAY WITH XXXXXX
7037 FLASHER ASSY - COMBINATION
7038 SEAT BELT TIMER LIGHT PLUS CHIME
7039 FLASHER ASSY - COMBINATION
7040 HORN ASSY - HIGH SINGLE HORN TYPE
7041 DIGITAL CLOCK
PAGE 14 OF 15
-------------------------
* Confidential portions omitted and filed separately with the Commission.
DETAIL PARTS ELECTRIC VEHICLE
&
PROCUREMENT RESPONSIBILITY
LIMITED PRODUCT
---------------------------------
8000 ELECTRIC QTY COP/NEW MATERIAL PROCESS ENGINEERING TOOLS PROTO(2) PARTS(48) REMARKS
---- -------- --- ------- -------- ------- ----------- -------- -------- --------- -------
8001 MOTOR 1 COP AMERIGON AMERIGON AMERIGON *
8002 CONTROLLER 1 COP AMERIGON AMERIGON AMERIGON *
8003 CHARGING XXXX 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX * MAIN & 12V
8004 BATTERY 28 COP LEAD ACID AMERIGON AMERIGON AMERIGON * QTY HAVE TO
ACCORD TO MOTOR
& CONTROLLER
8005 POWER BRAKE SYSTEM 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 POWER STEERING XXXX 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
0000 SAFETY XXXX 0 XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX
* REGULATION
FOOT BRAKE STOPPING DISTANCE; 29 m OR LESS (AT SPEED OF 50Em/h
PARKING BRAKE; VEHICLE SHALL BE CAPABLE OF HOLDING MECHANICALLY THE MOTOR
VEHICLE STATIONARY ON A DRIVE PAVED ROAD WITH 20% (11.6) GRADIENT (AT THE
STATE OF G.V.B.) OTHER PARTS NOT SHOWN ON LIST WILL BE DESIGNED & SUPPLIED
BY AMERIGON. ALL PARTS RELATED TO STYLING WILL BE CONFIRMED WITH *.
PAGE 15 OF 15
-------------------------
* Confidential portions omitted and filed separately with the Commission.
