OEM MANUFACTURING CONTRACT
BETWEEN
RELM WIRELESS CORPORATION
AND
UNIDEN CORPORATION
THIS OEM MANUFACTURING CONTRACT ("CONTRACT") is made this 13th day of March,
2000, by and between UNIDEN CORPORATION, a Japan corporation with principal
place of business at 0-00-0 Xxxxxxxxxx, Xxxx-Xx 000, Xxxxx ("SELLER"), and RELM
WIRELESS CORPORATION, a Nevada corporation with a place of business at 0000
Xxxxxxxxxx Xxxxx, Xxxx Xxxxxxxxx, XX 00000 ("BUYER").
RECITALS
Buyer may desire from time to time during the term hereof to purchase Product
(as defined herein) from Seller and Seller may desire to sell Product to Buyer.
Any such sales will be in accordance with the terms and conditions of this
Contract.
NOW THEREFORE WITNESSETH, that for good and valuable consideration, the
sufficiency and receipt of which are hereby acknowledged, the parties agree as
follows:
1. DEFINITIONS, SCOPE OF CONTRACT
A. Definitions
As used herein, the following terms shall have the definitions set forth:
1. "Buyer" shall mean RELM Wireless Corporation
2. "Seller" shall mean Uniden USA, Inc.
3. "Product" shall mean the product listed in XXXXXXXX X-0, and any
additional products that the parties may agree to include under
this Contract pursuant to Section 2.A.
-1-
4. "Contract" shall mean this agreement including all appendices,
the terms and provisions of which are incorporated into the
Contract by reference.
5. "Effective Date of this Contract" shall be the date so designated
by the parties on the first page of this Contract or, if no date
is designated, shall be the date on which the Contract is signed
by the last of the parties to sign.
6. "Specifications" shall mean the design, performance, and features
of the respective Product as established and determined by
Seller, and as such Specifications may be modified pursuant to
Section 11.B.
7. "Affiliate" of any Person means any Person Controlling,
Controlled by or under common Control with such Person.
8. "Control" and all derivations thereof means the ability to either
(i) vote (or direct the vote of) 50% or more of the voting
interests in any Person or (ii) direct the affairs of another,
whether through voting power, contract or otherwise.
9. "Persons" means any natural person, any governmental authority or
agency and any entity, including corporations, partnerships,
joint ventures, limited liability companies, joint stock
companies, trusts, estates, companies and associations, whether
organized for profit or otherwise.
10. "Asset Purchase Agreement" means that certain Asset Purchase
Agreement among Buyer, Uniden America Corporation and Xxxxxxxx
Capital Limited dated as of the date of this Contract.
11. "Uniden License" means Trademark License Agreement for the xxxx
"Uniden" pursuant to which Seller is granting Buyer a limited
license to use of the xxxx "Uniden."
B. Scope of Contract
This Contract sets forth the terms and conditions regarding purchases
by Buyer of the Products from Seller and shall apply to each purchase
and sale of the Products to be made in accordance with the Orders (as
defined in Section 2C.1) issued
-2-
from time to time by Buyer and accepted by Seller pursuant to
Section 2 hereof during the term of this Contract.
2. PRODUCT, PRICE, ORDERING AND MINIMUM
A. Product Models
1. The initial Product models available hereunder are set forth on
APPENDIX A-1. Additional Product models may be agreed to by the
parties in writing by execution of a New Model Addendum,
substantially in the form of APPENDIX A-2. Orders for Product
models for which there is a "Remark" on APPENDIX A-1 must comply
with that "Remark." Seller has no obligation to accept Orders or
to deliver any Product for which Seller does not accept Orders
due to the unavailability or substantial increase in Seller's
cost of parts or components for such Product.
2. Buyer has accepted the initial models of Product set forth on
APPENDIX A-1. Buyer agrees to provide all necessary tooling,
jigs, special equipment, etc. to Seller needed for the
manufacture of the initial models and the additional Product
models. Should any additional tooling, jigs, special equipment,
etc. be required, it shall be at the cost of Buyer. Seller will
exercise ordinary care in the normal maintenance and care of such
tooling, jigs, special equipment, etc. Buyer is responsible for
all risks relating to the tooling, jigs, special equipment, etc.
For any additional Product models agreed upon, if any, Seller
will provide drawings or other information for Buyer's approval.
Seller will provide a written quote to Buyer setting forth any
tooling requirements and costs applicable to each additional
future Product model (for which Buyer will be responsible). Buyer
will be responsible for any taxes, duties, etc., levied regarding
the same.
3. Seller will make available for purchase by Buyer Product in
accordance with the terms and provisions of this Contract.
Nothing in the Contract will require Buyer to buy or Seller to
sell any quantities of Product, absent firm, accepted Orders.
-3-
4. Manufacturer of the Product will be at a location determined by
Seller, in its sole discretion. The initial location will be
Laguna, The Philippines. The location may be moved by Seller in
its sole discretion. Seller will make a reasonable good faith
effort to give Buyer 120 days prior written notice of such move.
B. Price
1. The price for the initial Product models is specified in APPENDIX
A-1. Pricing for any additional Product models shall be specified
on the New Model Addendum for that model. Available accessories
and parts shall be offered to Buyer at Seller's regular prices
and terms and conditions for such accessories and parts.
2. Buyer shall provide Seller with a resale sales tax exemption
certificate and all other tax exemption certificates required by
applicable governmental authorities. Buyer is responsible to pay
the gross amount of any present or future sales, use, excise,
value-added, or other similar tax applicable to the sale of any
Product furnished by Seller to Buyer hereunder.
C. Ordering Procedure
1. Buyer shall order its desired quantities of the Product,
accessories or spare parts/units to be provided by Seller under
this Contract by means of purchase orders (herein referred to as
"ORDERS"). Orders shall be in writing and specify the Product,
accessories and/or available spare parts, as well as the
applicable price, quantity, and requested delivery schedule.
Orders will be for a minimum of 500 pieces of each item per
delivery.
2. The provisions of this Contract shall be applicable to Orders
whether or not this Contract is referenced in Orders and the
provisions of this Contract shall supersede any contrary
provisions in Orders or either party's purchase orders, order
acknowledgments, invoices or shipping documents.
3. Buyer's initial Order of each model shall be made 180 days in
advance. Thereafter, Orders of additional models shall be made
150 days in
-4-
advance. Commencing upon execution of this Contract, Buyer shall,
at the beginning of each calendar month, submit a rolling
forecast of Product to be delivered for the next six (6) calendar
months, including the current month. The forecast shall be firm
for the nearest in time four (4) months, and Buyer will at all
times have submitted Orders to cover the same. Orders are subject
to acceptance by Seller. Seller will confirm acceptance or
rejection of each Order via facsimile within ten (10) business
days of receipt of Order. Failure to confirm an Order within such
period will be considered a rejection of the Order by Seller. The
foregoing forecast provisions shall apply to the Product set
forth in APPENDIX A-1. However, any additional Product models
will be subject to the product planning cycle mutually agreed to
by Seller and Buyer in the New Model Addendum for the given
Product.
D. Tooling Assets. Buyer agrees to make the Tooling Assets (as defined in
the Asset Purchase Agreement) available free of cost to Seller to
allow Seller to fulfill its obligations under this Contract; provided,
however, that, notwithstanding this arrangement, Buyer will be fully
responsible for all liabilities, obligations or claims related to the
Tooling Assets. As long as this Contract is in effect, Seller will
have the right to control the location and use of the Tooling Assets
at Buyer's cost and risk. If the Tooling Assets must be updated,
duplicated or replaced in order for Seller to fulfill its obligations,
without undue burden, under this Contract, Buyer will be responsible
for all update, duplication or replacement costs; provided, however,
Seller must give Buyer 30 days written notice (and obtain Buyer's
prior written consent) of an update, duplication or replacement that
will require such costs; provided, further, if such costs exceed
$250,000.00 for any one Product model, Buyer may terminate the
Agreement; provided, further, that no outstanding Orders will be
canceled as a result of such termination unless the update,
duplication or replacement is necessary for Seller to fulfill an
Order, in which case such Order will be canceled and Buyer will
reimburse Seller for all costs Seller has incurred in connection with
such Order.
-5-
3. DELIVERY, TITLE AND RISK OF LOSS
A. Seller shall deliver the Product FOB to the factory. Seller shall
arrange the shipping method, shipping carrier and insurance applicable
to each shipment for delivery to Buyer in West Melbourne, Florida, at
the cost and risk of Buyer. Upon delivery at the factory, title to the
Product and all risk of loss or damage for the Product shall pass to
Buyer. Buyer is responsible for importation and all duties and taxes.
B. Seller will use its commercially reasonable efforts to provide Buyer
with an estimated delivery and shipment schedule for each Order.
C. If Buyer fails to take delivery of any quantity of the Product which
has been ordered by Buyer and tendered by Seller in compliance with
the terms and conditions of this Contract, Seller may place such
Product in storage at the place of manufacture or elsewhere. In such
event: (i) Seller shall notify Buyer of the placement of any quantity
of the Product in storage; (ii) Seller's delivery obligations shall be
deemed fulfilled and title and all risk of loss or damage shall
thereupon pass to Buyer; (iii) any amounts otherwise payable upon
delivery shall be payable upon presentation of Seller's invoices
therefor; and (iv) promptly upon submission of Seller's invoices
therefor, Buyer shall reimburse Seller for all expenses incurred by
Seller such as preparation for and placement of the Product into
storage, handling, storage, demurrage, inspection, preservation and
insurance.
D. Buyer may, within fourteen (14) days of receipt of any ordered Product
units at its ship-to destination, notify Seller in writing of
rejection of any Product units which do not comply with the
Specifications. Buyer may return such rejected units to Seller at
Seller's expense and risk, provided that Buyer: (i) obtains a Return
Material Authorization (RMA) number; and (ii) includes, along with
such returned Products, a written description, in reasonable detail,
of the nature and extent of the claimed nonconformity. Seller, at its
option, may repair or replace the defective units and ship such units
to Buyer, at Seller's expense and risk. If Seller determines that any
returned item conformed to the Specifications and was not defective,
Seller will return it to Buyer at Buyer's expense and risk.
-6-
4. EXCUSABLE DELAYS
A. Buyer and Seller shall not be liable for delays in delivery or failure
to perform due directly or indirectly to: (i) causes beyond its
reasonable control; (ii) acts of God, acts (including failure to act)
of any governmental authority (de jure or de facto), wars (declared or
undeclared), riots, revolutions, strikes or other labor disputes,
fires, floods, sabotage, nuclear incidents, earthquakes, storms,
epidemics; (iii) inability to timely obtain necessary materials,
items, components, or services from suppliers who are affected by the
foregoing circumstances; or (iv) the failure of the other party to
perform its obligations hereunder in a timely manner. The foregoing
shall apply even though any of such causes exists at the time of
execution of this Contract.
B. In the event of any delay or failure excused by this Section 4, the
party whose performance is delayed shall promptly notify the other
party and shall at the same time, or at the earliest practical date
after such notice, specify the revised delivery and performance dates.
In the event of such delay, the time of delivery or of performance
shall be extended for a period equal to the time lost by the affected
party by reason of the delay; provided, however, if any such delay
shall continue beyond thirty (30) business days, either party may
cancel any or all Orders affected by such delay.
5. PAYMENT
A. Payment will be made by irrevocable documentary letter of credit
payable at sight at delivery to FOB point. The letters of credit will
be opened by Buyer for the full amount of each Order of Product a
minimum of 120 days prior to scheduled shipment from the factory,
except for the initial Order of any Product model, which will be
opened 150 days prior to scheduled shipment from the factory. The
letters of credit will contain terms and conditions acceptable to
Seller, and will be confirmed by a U.S. bank acceptable to, and on
terms acceptable to, Seller.
-7-
B. Unique Materials
In the event of termination of this Contract other than by Seller
pursuant to Section 13.A, Buyer shall reimburse Seller for all unique
materials acquired by Seller for the manufacture of Product for Buyer.
Unique materials include, but are not limited to Product cabinets.
This obligation survives the termination or expiration of this
Contract.
C. Other Amounts
Any other amounts due Seller hereunder shall be payable within
forty-five (45) days after Buyer's receipt of Seller's invoice.
D. Late Payments
Any undisputed amounts which are not paid on a timely basis shall
accrue interest from the due date at the rate of one and one-half
percent (1-1/2%) per month (or such lesser rate as may be the maximum
permissible rate under applicable law). A party shall use its best
efforts to notify the other party within twenty (20) business days of
its receipt of any invoice or credit/debit documentation which it
disputes.
6. QUALITY ASSURANCE
Seller will perform such inspections and tests of each Product unit at
least comparable to the level of quality assurance that Seller implements
for its own products, and as Seller deems necessary in its reasonable
commercial judgment to ensure that such Product units comply with the
requirements of this Contract.
7. PRODUCT PROTECTION
A. No Warranty
The Product sold pursuant to this Contract is sold without warranty either
express or implied. SELLER SPECIFICALLY DISCLAIMS ALL IMPLIED WARRANTIES
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY AND OR FITNESS FOR A
PARTICULAR PURPOSE AND ANY RETAIL WARRANTY, INCLUDING ANY CONSUMER OR
END-USER WARRANTY.
B. EPIDEMIC FAILURE
-8-
An epidemic failure is a material failure of a Product due to a single
cause or any material, component or part therefor in an amount
exceeding ten percent (10%) of the total units shipped under this
Contract. In case of epidemic failure of a Product occurring within 18
months of date of shipment, Seller shall, at its option, repair or
replace affected units of Product at its expense. Buyer shall inform
Seller in writing of all epidemic failures and Seller shall have the
right to confirm the existence of such failures in a manner it deems
appropriate.
C. Seller Indemnity
Seller shall be responsible for and agrees to indemnify Buyer and hold
Buyer harmless from and against all third party claims, demands and
causes of action (including claims relating to compliance with all
applicable labor laws of the jurisdiction in which the Product is
manufactured) for direct damages (including reasonable legal fees and
expenses) for personal injuries or damage to tangible property (other
than Product) directly resulting from the willful misconduct or
negligent acts or omissions of Seller in the manufacturing of the
Product. Buyer agrees to notify Seller as soon as practical of any
third party claim, demand or cause of action for which Buyer will
request indemnification from Seller. Buyer will provide Seller with
the information and assistance reasonably requested by Seller to
defend such claim, demand or cause of action.
D. Buyer Indemnity
Buyer shall be responsible for and agrees to indemnify Seller and hold
Seller harmless from and against all third party claims, demands and
causes of action (including intellectual property claims and claims
related to compliance with applicable laws and governmental
regulations other than applicable labor laws of the jurisdiction in
which the Product is manufactured) for direct damages (including
reasonable legal fees and expenses) for personal injuries or damage to
tangible property directly resulting from the willful misconduct or
negligent acts or omissions of Buyer in the sale, repair (if
applicable), design, shipment, use or other handling of the Product.
Seller agrees to notify Buyer as soon as practical of any third party
claim, demand or cause of action for which Seller will request
indemnification from Buyer. Seller will provide Buyer with the
information and
-9-
assistance reasonably requested by Buyer to defend such claim, demand
or cause of action.
E. THE REMEDIES SET FORTH ABOVE ARE THE BUYER'S EXCLUSIVE REMEDIES
AGAINST SELLER. SUCH REMEDIES ARE IN LIEU OF ALL OTHER REMEDIES OR
WARRANTIES WRITTEN OR ORAL, STATUTORY, EXPRESS OR IMPLIED INCLUDING,
WITHOUT LIMITATION, THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE
IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE.
8. INTELLECTUAL PROPERTY
A. Buyer will provide all intellectual property rights of Buyer or any
third party necessary for Seller to fulfill Seller's obligations under
this Contract.
B. This Contract does not constitute a grant, transfer, license or
assignment from Seller to Buyer of any intellectual property rights of
Seller; provided, however, that Seller is granting Buyer a limited
license in the Uniden License.
9. LIMITATION OF LIABILITY
A. Limitation of Liability
The total liability of Seller, including its subcontractors or
suppliers, for all claims of any kind for any loss or damage, whether
in contract, warranty, tort (including negligence or infringement),
strict liability or otherwise, arising out of, connected with, or
resulting from the performance or non-performance of this Contract or
from the manufacture, sale, delivery, repair, replacement, licensing
or use of any Product, software or the furnishing of any service,
shall not exceed the amount paid by Buyer pursuant to Section 5,
entitled "PAYMENT," for the particular item(s) of Product, software or
services that give rise to the claim.
B. IN NO EVENT, WHETHER AS A RESULT OF BREACH OF CONTRACT, WARRANTY, TORT
(INCLUDING NEGLIGENCE OR INFRINGEMENT), STRICT LIABILITY OR OTHERWISE,
SHALL EITHER PARTY, OR ITS SUBCONTRACTORS OR SUPPLIERS, BE LIABLE FOR
ANY SPECIAL, CONSEQUENTIAL, INCIDENTAL, INDIRECT OR EXEMPLARY DAMAGES
-10-
INCLUDING, BUT NOT LIMITED TO, LOSS OF PROFITS, LOSS OF USE OF THE
PRODUCT OR ANY OTHER EQUIPMENT, COST OF CAPITAL, COST OF SUBSTITUTE
GOODS, FACILITIES, SERVICES OR DOWNTIME COSTS TO THE OTHER PARTY.
C. The provisions of this Section's "LIMITATION OF LIABILITY" shall apply
notwithstanding any other provisions of the terms of this Contract or
of any other agreement and shall survive the termination or expiration
of this Contract.
10. CONFIDENTIALITY
A. The information supplied by one part to the other under this Contract
which is marked or otherwise designated in writing to be of a
proprietary or confidential nature ("Confidential Information") shall
be kept confidential by the receiving party for a period of two (2)
years following expiration of this Contract. Except as otherwise
specified authorized in writing, the receiving party shall:
1. treat and protect the terms and provisions of this Contract and
all information, documentation, and know-how received as
Confidential Information;
2. not reproduce (except in a manner and purpose consistent with the
purpose of this Contract) Confidential Information in whole or in
part; and
3. use Confidential Information only in conjunction with its
performance hereunder or its use of the Product.
B. Neither part shall forward or disclose any Confidential Information of
the other party to any third party without the prior written consent
of the other party, except that nothing herein shall preclude a party
from disclosing such information to any Affiliate of such party with a
need to know such information. Notwithstanding the foregoing, neither
party shall have any obligation with respect to any information of the
other party which:
1. was previously known by or is independently and demonstrably
developed at any time by the receiving party without any
connection with the information received;
-11-
2. at any time becomes a matter of public knowledge or literature
without any act or negligence by the receiving party; or
3. is at any time lawfully received by the receiving party from a
third Person under circumstances permitting its disclosure to
others.
C. If and to the extent that a receiving party is required by any
administrative or judicial action to disclose the Confidential
Information to the other party, the receiving party shall attempt to
maintain the confidentiality of the information by asserting in such
action any applicable privileges and immediately after receiving
notice of such action, notify the disclosing party of such action to
give the disclosing party the opportunity to seek legal remedies to
maintain the confidentiality of same.
D. Each party shall take the same actions and utilize the same
precautions in preventing unauthorized disclosure of the other party's
Confidential Information as it uses with regard to its own
Confidential Information, which shall in no event be less than
reasonable care.
E. In the event of termination of this Contract for any reason, both
parties shall return or destroy and certify to the other party the
return or destruction of all Confidential Information and
reproductions thereof. Notwithstanding the foregoing, Buyer may retain
certain confidential or proprietary information for an agreed period
of time for the sole purpose of servicing the Product after which time
Buyer shall then return such information to Seller.
11. CHANGES AND CONDITIONS
A. In the event of any change in the Product as a result of the
imposition of requirements by any federal, state or local government,
the prices will be adjusted equitably as agreed to by the parties, in
writing, to reflect the added cost and expense of such change.
B. Seller reserves the right to establish or change any of the
specifications or features of the Product, at any time, provided that
no such change may, without the prior written approval of Buyer,
affect the form or function of the Product or require a change to the
cabinet design.
-12-
12. COMPLIANCE WITH LAWS
Buyer is responsible for ensuring that all Product complies with all
applicable state, federal and local laws and regulations that apply to such
Product. Seller is responsible for compliance with all applicable labor
laws of the jurisdiction in which the Product is manufactured.
13. TERMINATION OF CONTRACT
A. Either party may at any time by written notice immediately terminate
this Contract without compensation to the other party effective upon a
date which is at least one year following initial delivery, and upon
one hundred fifty (150) days written notice. However, any firm
accepted Order pending at the time of termination shall continue to be
binding on the parties.
B. Either party may by written notice terminate this Contract with
immediate effect if the other party has committed a substantial and
material breach of this Contract and, after receipt of written notice
from the other party specifying the breach, the breach is not
rectified within a time period which shall be reasonable taking into
account previous technical and other relevant conditions; provided,
however, that such time period shall not be less than fifteen (15)
days for corrective actions involving the payment of money and thirty
(30) days for all other purposes.
C. The acceptance of an Order from, or the sale of any Product to, Buyer
after the termination or expiration of this Contract shall not be
construed as a renewal or extension thereof, nor as a waiver of
termination but, in the absence of a new fully executed written
agreement, all such transactions shall be governed by provisions
identical with the provisions of this Contract.
D. This Contract shall terminate eighteeen (18) months from the Effective
Date of this Contract unless renewed by the Parties before
termination. Six (6) months following the date of this Contract, the
Parties shall review with each other whether they desire to renew this
Contract before termination.
-13-
14. NOTICES
Notices and other communications between the parties shall be transmitted
by facsimile or in writing to the other parties at the addresses indicated
below and shall be deemed effective upon confirmed receipt. Either party
may change its address by giving notice in writing thereof to the other
party.
SELLER: UNIDEN CORPORATION
C/O 0000 Xxxxxxxxxx Xx.
Xxxx Xxxxx, Xxxxx 00000
Attention: Xxxx Xxxxxxxx
Phone: (000) 000-0000
Fax: (000) 000-0000
BUYER: RELM WIRELESS CORPORATION
at 0000 Xxxxxxxxxx Xxxxx
Xxxx Xxxxxxxxx, Xxxxxxx 00000
Attention: Xxxxx Xxxxxxxxx
Phone: (000) 000-0000
Fax: (000) 000-0000
15. PARTIAL INVALIDITY
The invalidity, in whole or part, of any section or paragraph of these
terms shall not affect the validity of the remainder of such section or
paragraph, or of these terms. Section headings are inserted for convenience
only and shall not be used in any way to define the meaning of these terms.
16. ASSIGNMENT
Either party may assign its rights or obligations under this Contract to
any Affiliate of such party. Otherwise, neither party shall transfer or
assign its rights or obligations under this Contract.
17. PARTY RELATIONSHIP
-14-
This Contract does not create any agency, joint venture or partnership
between Buyer and Seller. Neither party shall impose or create any
obligation or responsibility, express or implied, or make any promises,
representations or warranties on behalf of the other party or other than as
expressly provided herein.
18. GOVERNING LAW
A. The validity, performance and all matters relating to the
interpretation and effect of these terms and the Contract and any
amendment thereto shall be governed by the laws of the State of Texas
without reference to its rules with respect to conflict of laws. The
parties agree to the exclusive venue and jurisdiction of the United
States District Court for the Northern District of Texas, Dallas
Division.
B. If any controversies or disputes arise out of or relating to this
Contract, the parties shall first make efforts to resolve and settle
the same through a good faith negotiation initiated within ten (10)
days of receipt of written request for same by either party to the
other. If no resolution of such controversy or dispute is reached
within sixty (60) days of the original request (or by such other date
as the parties may agree in writing), then either party may elect to
pursue litigation of such controversy or dispute as provided herein.
19. SUCCESSORS AND ASSIGNS
The terms and provisions of this Contract shall inure to the benefit and be
binding upon the successors and permitted assigns of either Buyer or
Seller.
20. ENTIRE AGREEMENT
This Contract constitutes the entire understanding between the Buyer and
the Seller concerning the subject matter hereof, and any representation,
promise, understanding, proposal, agreement, warranty, course of dealing or
trade usage not expressly contained or referenced herein shall not be
binding on Seller. No modifications, amendment, rescission, waiver or other
change shall be binding on either party unless accepted in writing by that
party. NEITHER BUYER NOR SELLER ASSUMES ANY
-15-
OBLIGATIONS OR LIABILITIES IN CONNECTION WITH THE SALE OF THE PRODUCT OTHER THAN
THOSE EXPRESSLY STATED IN THIS CONTRACT.
[Signature page follows]
-16-
IN WITNESS WHEREOF, the parties hereto have caused this Contract to be duly
executed by their duly authorized representatives as of the dates set forth
below.
UNIDEN CORPORATION RELM WIRELESS CORPORATION
By: By:
-------------------------------- ----------------------------------
Name: Name:
------------------------------ --------------------------------
Title: Title:
----------------------------- -------------------------------
Date: Date:
------------------------------ --------------------------------
Witness: Witness:
--------------------------- -----------------------------
Witness Name: Witness Name:
---------------------- ------------------------
-17-
ATTACHMENTS:
APPENDIX A-1 & A-2 - PRODUCT
-18-
APPENDIX A - 1
PRODUCT
MODEL PRICE FOB FACTORY
-19-
APPENDIX A - 2
NEW MODEL ADDENDUM
NEW MODEL PRICE FOB FACTORY
Specifications:
Development schedule:
Tooling Costs:
Approved:
BUYER
SELLER
Uniden Corporation RELM Wireless Corporation
By: By:
-------------------------------- --------------------------------
Date: Date:
------------------------------ ------------------------------
