Contract Number 11072001
ENOVA SYSTEMS
Digital Power Management(TM)
CONFIDENTIAL TREATMENT REQUESTED
* Redacted portion has been omitted and filed seperately with the SEC
Panther(TM) Drive System Product and Services Agreement
1 Introduction and Purpose. This Product and Services Agreement ("Agreement") is
entered into as of 22 January, 2002 (the "Effective Date") by and between Enova
Systems, Inc., a California corporation ("Enova") with its principal place of
business located at 00000 X. Xxxxxxxx Xxxxx, Xxxxxxxx, Xxxxxxxxxx 00000, and
Moriah Corporation, a Japanese corporation ("Purchaser") with its principal
place of business located at 000 0X, XXX Xxxx. Xx. 0, 0-xxxxx, Xxxxx-xxxxxxxxx,
Xxxxxxx-xx, Xxxxx, Xxxxx 101-0062.
1.1 Enova manufactures and sells certain proprietary vehicle drive
systems, as further described in Appendix 1 (the "Panther Drive Systems").
1.2 Purchaser manufactures and sells certain vehicles listed in
Appendix 2 and wishes to incorporate the Panther Drive Systems as an integral
drive system in those vehicles.
1.3 Purchaser wishes to obtain Enova's assistance in the initial
incorporation of the Enova Drive Systems into its vehicles and Enova wishes to
provide joint development assistance to Purchaser.
1.4 Purchaser and Enova wish to address marketing opportunities and
provide for the purchase of Panther Drive Systems for incorporation Purchaser's
vehicles and sale in the event that the joint development efforts are
successful. The Purchaser products listed in Appendix 2 developed and
manufactured under this Agreement incorporating Panther Drive Systems are
referred to herein as the "Products."
1.4 Agreement. This Agreement consists of the body of the Agreement,
the Appendices, and any purchase order issued and accepted pursuant to the
provisions of this Agreement. Section 2 shall only apply if there are
Development Efforts (defined below in Section 2) and Sections 3 through 7 shall
only apply if there is Commercial Production (defined below in Section 3). The
terms, conditions and provisions of this Agreement shall be construed in a
manner that gives effect to the entire agreement to the extent practicable. To
the extent that any provisions conflict, the Agreement and Appendices control
over any inconsistent purchase order terms, Appendix 9 (Additional Terms for
Development Efforts) controls over any inconsistent terms relating to
Development Efforts and Appendix 10 (Additional Terms for Commercial Production
and Additional General Terms) controls over any inconsistent term in the
Agreement other than those relating to the Development Efforts.
2 Joint Technical Development and Grant of Rights
2.1 Intention. Purchaser intends to integrate a Panther Drive System
into a prototype vehicle (the "Prototype"), and as part of such efforts will
endeavor to combine Panther Drive System with products from manufacturers,
suppliers, and developers other than Enova. All efforts by Purchaser to combine
the Panther Drive System with other products or otherwise integrate Panther
Drive System into the Prototype are referred to herein as "Development Efforts."
Without limiting the generality of the foregoing, Development Efforts shall
include those development projects undertaken by Enova in direct response to a
Development Effort.
2.2 Development Effort Scope. The parties shall perform the Development
Efforts described on Appendix 3. Each party shall pay for expenses and make
other payments associated with the Development Efforts as provided in Appendix 3
and Appendix 9. Any legal terms that are applicable only to the Development
Efforts are specified in Appendix 9.
1 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
2.3 Out-of-Scope Efforts. The parties shall endeavor in good faith to
establish their respective rights and duties in any Development Effort that is
not within the Development Effort scope defined in Appendix 3. These rights and
duties may include, but are not limited to, assignment of intellectual property
and payment for additional hardware or services delivered. Unless the parties
agree otherwise in writing, an out-of-scope Development Effort that results in
new technology or improvement to existing technology will be owned as provided
in Attachment 9.
2.4 Prototype Hardware Restrictions. The Prototype shall be considered
a prototype product until such time as both parties mutually agree otherwise in
writing. Enova and Purchaser agree that neither party shall publicly display at
trade shows or otherwise promote, market, or sell any prototype Purchaser
Product without the other party's prior written approval.
2.5 Commercial Production. Promptly following the date (the Acceptance
Date") on which Enova and Purchaser mutually agree that successful completion of
the development and testing of Purchaser Product has occurred as contemplated by
Appendix 3, then Purchaser shall engage in commercial production, sale and
support of Products ("Commercial Production").
3 Purchase and Sale of Products. If Commercial Production commences, Enova
agrees to sell and Purchaser agrees to purchase Panther Drive Systems pursuant
to the terms, conditions and provisions of this Agreement.
3.1 Purpose. Purchaser may purchase the Panther Drive Systems and
related spare and replacement parts for the sole purpose of incorporating them
into the Purchaser products listed in Appendix 2 to create Products and as
replacement parts for the Products. Purchaser may use the resulting Products or
sell or lease them, either directly to purchasers or indirectly through one or
more levels of distribution.
3.2 Nonexclusivity. Enova reserves the right to select and authorize
other businesses to sell and service Enova products and parts, to sell products
and parts directly to direct accounts of Enova, to sell products and parts to
other purchasers or original equipment manufacturers for use as an integral part
of assembled equipment, or to any other customers.
3.3 Trained Sales Staff. Purchaser shall maintain a staff of trained
sales personnel in order to ensure maximum market penetration and fulfillment of
sales potential of the Products.
3.4 Promotion of Products. Following the Acceptance Date, Purchaser
shall develop a market and promote the sale of the Products actively, and
advertise with a program of advertising to create awareness of Enova products
and their associated value proposition. Such promotion and advertising may
include, but is not limited to, participation in trade shows, presentations at
seminars or industry meetings, direct mailings to key customer groups and market
segments, direct sales calls, and other appropriate means. Enova reserves the
right to review and disapprove all advertising that contains Enova's name or
products as to form and substance. Purchaser shall deliver to Enova prior to its
use a copy (translated into English if the original is not in English) of any
advertisement, promotion, trademark listing, or display with respect to Enova
products, and Enova shall have the right to review and approve or disapprove the
form and substance of each.
3.5 Sales Literature. Enova shall provide Purchaser with an adequate
supply of Panther Drive System sales literature ("Promotional Materials") at the
prevailing price. Enova shall have no obligation to provide any Promotional
Materials or other materials or documentation to Purchaser in any language other
than English. Enova grants to Purchaser the right to translate or to have
translated into other languages any materials or documentation received from
Enova and relating to the Enova products (including, but not limited to, the
Promotional Materials). Purchaser may use, reproduce, and/or sell such
translations, but only to the extent necessary to support and market Products.
Enova shall not be responsible or liable for the accuracy of such translations
and Purchaser shall indemnify Enova and hold it harmless from all damages,
expenses and liabilities resulting from any translation inaccuracies.
2 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
3.6 Press Releases. The relationship established by this Agreement is
one that the parties hereto will want to announce, either jointly or
independently, in the form of press releases, the contents, format, and timing
of which will be subject to the prior written approval of Purchaser and Enova.
Such approval will not unreasonably be withheld by either party. No such prior
written approval shall be required for disclosure reports and filings, which
either party is required to make as a matter of law.
3.7 Professional Standards. Purchaser shall ensure that all of its
personnel comply with professional sales standards of conduct typical of a well
run business in order to maintain and promote responsible and ethical conduct on
the part of such personnel and thereby enhance and support the reputation and
goodwill of Enova products.
3.8 Records. Purchaser shall keep records of the incorporation of all
Enova products and parts into Purchaser products.
3.9 Inspection. Enova shall have the right during normal business
hours, at its cost with reasonable prior written notice, to inspect all of
Purchaser's facilities, written policies and procedures, and books and records,
which relate to the fulfillment of Purchaser's duties hereunder. Purchaser shall
cooperate, and cause its personnel to cooperate, with any such inspection.
4 Service and Support.
4.1 Qualified Service Provider Appointment. Enova appoints Purchaser as
a Qualified Service Provider ("QSP") with the rights and responsibilities
described in this Section 4.
4.2 Description of QSP Services. Purchaser shall provide services in
any location in which a Product is maintained, used, leased, or sold by
Purchaser. Services to be provided by Purchaser shall include, but are not
limited to:
4.2.1 providing to end users operating and maintenance
instructions and advice with respect to Panther Drive Systems. Upon request,
Purchaser shall provide the location and the use of each unit to Enova. Upon
commissioning, Purchaser shall explain the provisions of Enova's warranty to the
end user, and shall instruct the end user in the proper operation of the Panther
Drive System incorporated into the Product.
4.2.2 providing services at such times following installation
of Panther Drive Systems as may be necessary to ensure proper and efficient
operation thereof, including but not limited to commissioning the Panther Drive
System, making installation inspections and necessary adjustments, and
performing all other services reasonably necessary at the time of delivery
thereof.
4.2.3 providing warranty services with respect to Panther
Drive Systems consistent with Enova's Warranty Policy and Procedures.
4.2.4 providing adequate service facilities and vehicles and
providing an adequate staff of trained service personnel in order to provide
service for those Enova products in a professional and timely manner.
4.3 Service Certification. Purchaser shall cause a sufficient number of
its qualified employees to obtain and maintain QSP certification to provide the
services described above. Purchaser shall send such employees, at reasonable
intervals, to Enova's QSP certification seminars in Torrance, California.
Thereafter, Purchaser shall send all such employees to periodic refresher and
new Enova certification seminars so that such employees may maintain their Enova
QSP Certifications. Enova shall bear the cost of preparing such courses and
Purchaser shall bear all travel, lodging, and related costs for sending such
employees to attend such seminars, including a fee to Enova for each course
attended. At Purchaser's request, Enova shall, subject to availability and at
such time upon which the Parties mutually agree, send Enova personnel to present
training seminars for Purchaser's employees at a location to be
3 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
specified by Purchaser, provided that Purchaser shall pay all documented travel,
lodging, and related costs, plus a fee to Enova for each course taught.
4.4 Service Parts. Purchaser shall purchase and maintain a sufficient
inventory of service parts as prescribed by Enova according to Enova's uniform
parts inventory stocking guidelines in effect from time to time and based on the
field population of Products to be serviced by Purchaser, so as to be able to
fulfill its service responsibilities in a timely and professional manner.
Purchaser may sell or deliver Enova parts only to end users who purchased
Products from Purchaser or to another Enova QSP. Under no circumstances shall
Purchaser sell, lease, distribute, deliver, or transfer Enova parts unless done
in connection with a specific Panther Drive System warranty repair or
replacement.
4.4.1 Parts. In providing services on Enova products,
Purchaser shall use only authorized Enova parts, unless Enova agrees otherwise
in writing.
4.4.2 [REDACTED]*
4.4.3 Service Facilities, Prices. All services billable to end
users or submitted as a warranty claim to Enova shall be provided at the same
rates. Service parts prices charged by Purchaser shall not exceed the Enova list
price, plus applicable freight or taxes in the location of service.
4.5 Purchaser's Basic Warranty Service Obligation. Purchaser's primary
warranty service duty as a QSP is to identify and replace malfunctioning parts
under warranty promptly and efficiently in accordance with Enova's technical
service policies and parts stocking guide in effect from time to time. Purchaser
shall make reasonable efforts to determine whether the end user has a valid
warranty claim. Purchaser shall not recondition or retrofit any product or part
and shall keep in a central location for Enova's inspection all defective Enova
products and parts. At Enova's direction and expense, Purchaser shall return
promptly to Enova all such defective products and parts. Purchaser shall not
instruct an end user to return any Enova product or part directly to Enova.
4.5.1 Compensation for Warranty Repairs. [REDACTED]*
4.6 System Upgrades. Enova may change the design of the Panther Drive
System from time to time and, at its sole discretion, provide upgraded parts,
including without limitation hardware, firmware and software, for the Panther
Drive Systems (collectively, "Upgrades") shipped to Purchaser but which have not
yet been incorporated in Products and shipped to an end user. In the event Enova
decides to provide such an Upgrade, Enova will notify Purchaser of the Upgrade,
and Enova and Purchaser will mutually agree upon a time for the Upgrade to be
installed and the party or parties who will do the installation.
4.6.1 Availability of Parts. [REDACTED]*
4.7 Support Documentation. Enova will make available for purchase by
Purchaser comprehensive training, repair, and service manuals for use in
maintaining and servicing the Panther Drive Systems.
4.8 Manufacturer Support.
4.8.1 Scope of Support. [REDACTED]*
4.8.2 Fees and Expenses. [REDACTED]*
5 Order, Delivery and Payment. [REDACTED]*
5.1 Prices. [REDACTED]*
4 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
5.2 Rolling Forecast. [REDACTED]*
5.3 Calculation of Annual Volume Pricing. [REDACTED]*
5.4 Purchase Orders and Shipment Terms. [REDACTED]*
5.5 Procedures[REDACTED]*
5.6 Reschedule/Cancellation. [REDACTED]*
5.7 Delivery. [REDACTED]*
5.8 Title And Risk Of Loss. [REDACTED]*
5.9 Inspection; Acceptance. [REDACTED]*
5.10 Payment Terms[REDACTED]*
5.11 Late Payments. [REDACTED]*
5.12 Changes. [REDACTED]*
6 Warranties to End Users.
6.1 Enova's End User Product Warranty. Purchaser shall include Enova's
End User Product Warranty in each agreement for sale or lease of the products
and parts entered into by Purchaser with end users and Purchaser shall furnish a
copy of such End User Product Warranty to the end user upon delivery of each
product. Enova's End User Product Warranty in effect on the Effective Date is
attached as Appendix 6. Enova reserves the right to modify, change or revise the
product warranty at any time upon notice to Purchaser, with such modifications,
changes or revisions applicable for any products or parts that are ordered after
the revision date. If any such modification substantially changes any of the
discussions or agreements Purchaser may have had with its then current or
prospective customers, Enova and Purchaser will discuss and determine how to
resolve such modifications.
6.2 Any Additional Purchaser Warranties. Enova shall have no obligation
with respect to, and Purchaser shall be solely responsible for and shall
indemnify and hold harmless Enova with respect to, any warranties beyond Enova's
End User License and Warranty that Purchaser may provide with respect to any
product or part.
7 Trademarks and Branding.
7.1 License to Use Enova Trademarks. Purchaser acknowledges that Enova
is the owner of all right, title, and interest in and to Enova trademarks. Enova
hereby grants to Purchaser a license, for so long as this Agreement remains in
effect, to use Enova trademarks, provided that Purchaser uses the Enova
trademarks solely in marketing, distributing, and selling Panther Drive Systems
as integrated in Products under the terms and conditions of this Agreement and
in accordance with the specifications as to style, color, and typeface for the
Enova trademarks. Upon termination of this Agreement, Purchaser shall take all
action necessary to transfer and assign to Enova or Enova's nominee any right,
title, or interest in or to any Enova trademarks that Purchaser may have
acquired in any manner as a result of the marketing, distribution, sale, or
resale of any Enova product, and Purchaser shall cease using any Enova
trademarks.
7.2 Branding. Purchaser shall prominently display on the Products, as
well as on all promotional and other collateral materials relating to, and all
packaging for Products, such trademarks,
5 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
trade names, service marks, designations that Enova may adopt to identify it or
any Enova products, or any patent, patent application, or other proprietary
markings in the size and manner that Enova designates from time to time. Under
no circumstances shall Purchaser remove any such proprietary notice or marking
affixed to any Enova product, parts, or related materials.
8 Term and Termination
8.1 Term: This Agreement shall commence on the Effective Date and
continue in full force and effect for [REDACTED]*. Thereafter, this Agreement
automatically shall renew for subsequent terms of [REDACTED]* each, unless
either party provides the other party with notice of its intention not to renew
this Agreement no fewer than 90 calendar days prior to the end of the
then-current term.
8.2 Termination by Either Party: Each party may terminate this
Agreement immediately by delivering to the other party written notice of such
termination in the event of any of the following:
8.2.1 failure of the Prototype or the Panther Drive System
provided as part of the Development Efforts to pass acceptance test criteria as
outlined in Appendix 3;
8.2.2 a material breach of this Agreement by the other party
that continues uncured for thirty (30) calendar days following written notice
thereof from the non-breaching party;
8.2.3 a material breach of confidentiality or nondisclosure
agreements by the other party, including, without limitation, Section 9 below;
8.2.4 the other party's failure to pay when due any
indebtedness owed by Purchaser to Enova for Enova products or parts;
8.2.5 the execution by the other party of an assignment for
the benefit of creditors, or the commencement by or against the other party of
voluntary or involuntary proceedings (which are not dismissed within 60 calendar
days) under any bankruptcy, reorganization, or similar laws of any jurisdiction,
or if any order shall be made or any resolution passed for the winding up,
liquidation or dissolution of the other party, if a receiver be appointed for it
for all or substantially all of its assets, or if a substantial portion of its
goods or properties shall be taken in execution; or
8.2.6 the other party ceases to do business or otherwise
terminates its business operations relevant to this Agreement.
8.3 Termination by Enova. In addition to the grounds for termination
set forth in Section 8.2, Enova may terminate this Agreement upon
8.3.1 Any attempted or actual transfer or assignment of this
Agreement or any right or obligation hereunder by Purchaser, whether by
operation of law, change of control or otherwise, without the prior written
approval of Enova; or if
8.3.2 Purchaser merges into any entity, or the Sale of a
Controlling Stock Interest in Purchaser occurs, in each case other than in a
transaction in which the person or persons controlling the surviving, continuing
or acquiring person after the transaction is or are substantially identical to
the person or persons controlling Purchaser before the transaction; provided
that, "Sale of a Controlling Stock Interest" of Purchaser means the acquisition
by any "person" or "group," as such terms are defined under the Securities
Exchange Act of 1934, of 50% or more of the voting securities of Purchaser.
8.4 Termination of Purchase Orders. Either party may terminate a
Purchase Order under this Agreement under the same circumstances as would give
rise to a right to terminate this Agreement.
6 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
8.5 Payment. Any termination of this Agreement shall not release
Purchaser or Enova from paying any amount that it may then owe to the other
party. In the event of termination of this Agreement, all of Purchaser's debt to
Enova and all of Enova's obligations to Purchaser pursuant to this Agreement
shall become immediately due and payable on the date of termination. Termination
does not relieve Purchaser of the obligation to pay for Enova products or parts
ordered but not shipped prior to termination.
8.6 Survival of Obligations. In addition to any provisions that survive
the termination of this Agreement by their express terms and any provisions that
would be necessary or useful to the parties in enforcing their respective rights
under the Agreement, the following provisions shall survive the termination of
this Agreement: 3.8, 3.9, 4.8 (for a period of five years), 5.10, 5.11, 6, 8.5,
8.6, 9, 10-15, and Sections 4.0 and 5.0 in Appendix 3.
9 Confidential Information and Intellectual Property.
9.1 Confidential Information. Confidential information shall be
governed by the standard Enova Nondisclosure Agreement, pursuant to Appendix 8,
the terms and provisions of which are incorporated herein by this reference and
binding upon the parties hereto.
9.2 Intellectual Property. The sale of Enova products to Purchaser does
not convey to Purchaser any intellectual property rights in such Enova products,
including but not limited to any rights under any patent, trademark, copyright,
or trade secret. Except as expressly provided in Section 9.3 of this Agreement,
Purchaser may not use or sell any Enova product, alone or in combination with
other products, without a separate license from Enova under all applicable
patents, copyrights and trademarks. Purchaser's use and sale of any Enova
products shall be solely in accordance with the terms and conditions of this
Agreement. Neither the sale of any Enova Product nor any provision of this
Agreement shall be construed to grant to Purchaser, either expressly, by
implication or by way of estoppel, any license under any patents or other
intellectual property rights of Enova covering or relating to any other product
or invention or any combination of Enova products with any other product.
Purchaser shall use the Enova products furnished by Enova solely in accordance
with the terms of this Agreement, and Purchaser shall not, directly or
indirectly, disassemble, decompile, reverse engineer, or analyze the physical
construction of any of the Enova products for any purpose.
9.3 License Grant[REDACTED]*
10 Legal Compliance.
10.1 Compliance with Applicable Law. Purchaser shall ensure that all
Enova products and parts, and Purchaser's services with respect to them,
including without limitation the sale, leasing, rental, installation,
commissioning and warranty service, comply with all applicable laws, rules,
regulations and standards within the sales territory. Purchaser shall obtain and
maintain, at its sole expense, any and all certifications, licenses, other
authorizations, ratings and approvals required or advisable under the laws of
the sales territory and elsewhere in connection with Purchaser's integration,
distribution, sales, and provision of services for Enova products and parts.
Without limiting the generality of the foregoing, Purchaser shall (a) supply and
fit all signs and safety notices to the Enova units and provide all manuals and
instructions so that they comply with all applicable laws and regulations, and
(b) obtain all necessary governmental approvals and licenses. Enova shall assist
Purchaser where possible in obtaining such approvals and compliance.
10.2 Improper Payments. Purchaser and Enova represent and warrant that
they have not made, or promised to make, any payment to any public official in
violation of the United States Foreign Corrupt Practices Act or other applicable
laws. Purchaser and Enova represent and warrant that they are aware of the
applicable United States regulations governing bribery, agency, and government
purchases and any other relevant regulations and that they shall comply with
such rules and regulations. Each party hereto agrees to hold the other harmless
from and against the consequences of a violation by it of this provision.
7 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
10.3 Export Regulations. Purchaser represents and warrants that it has
and will comply in all material respects with all provisions of United States
export regulations and laws. Purchaser acknowledges that it has read and is
familiar with these regulations and laws and shall, for a period of at least two
(2) years after the expiration or earlier termination of this Agreement, fully
comply with all provisions of these regulations and shall permit Enova's
representatives and/or representatives of the United States government to
inspect all such records as may be required. Purchaser represents and warrants
that it shall provide Enova, upon Enova's request, with copies of bills of
lading and other shipping documentation in order to demonstrate Purchaser's
compliance with the foregoing. Purchaser represents and warrants that it shall
obtain written assurance from end users of the Panther Drive Systems that they
are not intended to be used for any purposes prohibited by United States export
laws and regulations and shall provide Enova with such information and
documentation as Enova reasonably requests in order to verify that Purchaser's
export of the Panther Drive Systems complies with applicable United States
export regulations and laws.
11 DISCLAIMER. [REDACTED]*
12 Intellectual Property Infringement Protection. [REDACTED]*
13 Limitation of Liability In General. [REDACTED]*
14 Dispute Resolution: [REDACTED]*
15 Miscellaneous:
15.1 Governing Law [REDACTED]*
15.2 Entire and Sole Agreement. This document, together with the
attached exhibits specifically referenced in this document, constitutes the
complete and exclusive statement of the mutual understanding of the parties with
respect to its subject matter. This Agreement supersedes any and all prior or
contemporaneous understandings, representations, or other communication between
the parties of any sort, whether written or oral, with respect to its subject
matter. The terms of this Agreement shall supersede any inconsistent terms and
conditions of any Purchase Order, regardless of form, issued by Purchaser to
Enova. In any proceeding brought to enforce or interpret the terms of this
Agreement, the nonprevailing party shall pay to the prevailing party the
prevailing party's attorneys' fees and costs incurred.
15.3 Assignment. [REDACTED]*
15.4 Force Majeure. Each party's performance under this Agreement (i)
shall be suspended (other than the obligation to pay monies already due to
either party or becoming due as a result of filling orders placed and accepted)
for so long as such performance is hindered or prevented by events or
occurrences beyond its reasonable control ("Force Majeure"), such as, but not
limited to, riots, labor disputes of a general nature, national or civil wars
(declared or undeclared), insurrections, rebellions, terrorist acts, embargoes,
civil disturbances, dispositions or orders of governmental authority (whether
such authority be actual or assumed), acts of civil or military authority,
fires, strikes, delays in transportation, inability to obtain necessary labor,
manufacturing facilities or materials from usual sources and acts of God and
(ii) any delays resulting from any such cause shall extend the time for
performance correspondingly. If a failure to perform results from a governmental
law, rule, regulation, disposition or order and the affected party is unable to
perform, after making reasonable efforts to comply with such law, rule,
regulation, disposition or order, the matter shall be deemed a Force Majeure. IN
NO EVENT SHALL EITHER PARTY BE LIABLE TO THE OTHER FOR GENERAL, CONSEQUENTIAL,
INDIRECT OR SPECIAL DAMAGES DUE TO ANY FORCE MAJEURE.
8 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
15.5 Counterparts. This Agreement may be executed and delivered in one
or more counterparts and by facsimile transmission, each of which shall be
deemed an original, but all of which together shall constitute one and the same
instrument.
15.6 Severability. In the event any provision of this Agreement is held
to be invalid or unenforceable, the remaining provisions shall remain in full
force and effect.
15.7 Relationship of the Parties. Purchaser shall conduct its business
in the purchase, distribution, marketing, sale, installation, commissioning and
provision of services with respect to Enova products hereunder as a principal,
for its own account and at its own expense and risk. Nothing contained in this
Agreement shall be construed as creating a joint venture, partnership, agency,
or employment relationship between the parties hereto nor shall either party
have the right, power, or authority to create any obligation or duty, express or
implied, on behalf of the other party. Purchaser shall not act or represent
itself, either directly or by implication, as an agent for Enova and will not
attempt to create any obligation, or make any representation, warranty, or
covenant that Enova has not specifically authorized in working on behalf, or in
the name, of Enova.
15.8 No Third Party Beneficiaries. Unless otherwise expressly provided,
no provisions of this Agreement are intended or shall be construed to confer
upon or give to any person or entity other than Enova or Purchaser, any rights,
remedies or other benefits under or by reason of this Agreement.
15.9 Notices. All notices or other communications that shall or may be
given pursuant to this Agreement, shall be in writing, shall be sent by
certified or registered air mail with postage prepaid, return receipt requested,
by facsimile, e-mail, reputable overnight or other rapid courier with tracking
capabilities, or by hand delivery; provided, however, that if a notice or other
communication is sent via facsimile or e-mail, such notice or communication
shall also sent by one of the other means of transmittal (with the exception of
facsimile or e-mail, as the case may be). Such communications shall be deemed
given and received upon delivery if sent by overnight courier or hand delivered,
within three business days of mailing, if sent by certified or registered mail,
and within the time period set forth above for such method other than facsimile
or e-mail if sent by facsimile or e-mail, and shall be addressed to the Parties
as set forth in the preamble to this Agreement or such other addresses as the
Parties may designate and provide notice of in writing from time to time in
accordance with this Section.
15.10 Waiver. No waiver of any provision of this Agreement or of any
rights or obligations of either party hereunder shall be effective unless in
writing and signed by the party waiving compliance, and any such waiver shall be
effective only in the specific instance and for the specific purpose stated in
such writing.
15.11 Amendments. This Agreement shall not be modified, amended, or in
any way altered except by an instrument in writing signed by the parties hereto.
9 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
IN WITNESS WHEREOF, the parties have entered into this Agreement as of the
Effective Date.
ENOVA SYSTEMS, INC. PURCHASER
By: ______________________________ By: ______________________________
Name: [REDACTED]* Name: [REDACTED]*
Title: President & CEO Title: President & CEO
10 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
16 List of Appendixes
16.1 Appendix 1. Panther Drive System Products covered by this
agreement.
16.2 Appendix 2. Purchaser Products covered by this agreement.
16.3 Appendix 3. Development Program Responsibilities, Acceptance
Criteria, and Payments and Expenses
16.4 Appendix 4. Warranty Acceptance Criteria for Purchaser Product
16.5 Appendix 5. Warranty Labor Flat Rate Schedule
16.6 Appendix 6. End User Product Warranty
16.7 Appendix 7. Prices and Other Commercial Terms
16.8 Appendix 8. Non-Disclosure Agreement
16.9 Appendix 9. Additional Terms for Development Efforts.
16.10 Appendix 10. Additional Terms for Commercial Production and
Additional General Terms.
11 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
Xxxxxxxx 0
Xxxxxxx Xxxxx System Products
[REDACTED]*
12 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
Appendix 2
Purchaser Products
1. [REDACTED]*
13 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
Appendix 3
Development Program Responsibilities, Acceptance Criteria, Special Terms, and
Payments and Expenses
1.0 Development Program Responsibilities.
[REDACTED]*
14 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
2.0 Acceptance Criteria.
1. Enova and Purchaser will work together to complete the acceptance criteria
table below. Drive system performance will not be required to exceed product
specifications.
2. Enova and Purchaser will complete the acceptance criteria table within 30
days of execution of this contract.
Parameter Target Responsible
[REDACTED]*
3.0 Special Terms. Special terms that apply to the Development Efforts are set
forth in Appendix 9.
None
15 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
Attachment 1 to Xxxxxxxx 0
Xxxxxxx Xxxxx System and Other Purchased Deliverables
In support of the Development Program
This attachment will be completed upon receipt of drive system purchase order
from Purchaser.
16 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
Attachment 2 to Appendix 3
Prototype Components to be Supplied by Purchaser
Prototype Vehicle, and all systems and components not included in the purchase
order to Enova for the drive system described in Attachment 2 to Appendix 3.
17 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
Appendix 4
Warranty Acceptance Criteria for Purchaser Product
1 Vehicle Application
[REDACTED]*
2 Prototype Installation
[REDACTED]*
3 Installation Approval Inspection
[REDACTED]*
4 Beginning of warranty coverage.
[REDACTED]*
18 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
Appendix 5
Warranty Labor Flat Rate Schedule
The following schedule covers the maximum allowed reimbursable labor expenses
under warranty for The Panther Drive System and components.
[REDACTED]*
This labor rate and replacement time list is valid for orders placed by December
31, 2001. A new labor rate and replacement time list will be provided no later
than December 15th of each year for the following year.
19 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
Appendix 6
End User Product Warranty
Enova Panther(TM) Propulsion System Warranty
Terms of Coverage:
1. Users. Enova Systems, Inc. ("Enova") provides the following warranty
for the Panther(TM)Propulsion Systems and for the optional parts and
systems available for the Panther(TM)Propulsion Systems, [REDACTED]*
2. Coverage. Enova warrants that any standard part of the
Panther(TM)Propulsion System and any optional part or system (as
defined below), that is properly installed and operated per the
specifications provided by Enova, and found by Enova under normal use
and service to malfunction during the warranty period, [REDACTED]*
3. Panther(TM)Propulsion System Parts. Parts covered by this warranty
include [REDACTED]*
4. Warranty Period. The "Warranty Period" begins on [REDACTED]*
5. Panther(TM) Propulsion System Replacement Part Warranty Period.
Panther(TM) Propulsion System parts supplied by Enova under this
warranty for replacement or repair of any workmanship or material
defect will carry a Warranty Period that is equal to the remaining
Warranty Period and Coverage of the Original Panther Drive System
parts.
6. Repairs Under Warranty. All repairs under this warranty must be
conducted by an Enova Qualified Service Provider, using only new,
remanufactured, or rebuilt Enova Panther(TM) Propulsion System parts
supplied or approved by Enova. During the warranty period, any use of
or substitution of parts other than Panther(TM) Propulsion System parts
supplied or approved by Enova will void the warranty. All claims under
this warranty must be made to the Qualified Service Provider within 30
days of the malfunction of the Panther Drive System. All parts replaced
under this warranty shall become the property of Enova.
Exclusions to Warranty. [REDACTED]*
1. Other Exclusions. Parts and labor reimbursement by Enova is the only
remedy to owners and users under this warranty. Enova does not
authorize any person or party to assume or create for it any other
obligation or liability in connection with the products or any part of
the products. Enova's warranties shall not be enlarged by, nor shall
any obligation or liability of Enova arise due to, Enova providing
technical advice, facilities, or service in connection with any Product
or Contract.
2. THIS WARRANTY IS THE EXCLUSIVE AND ONLY WARRANTY FOR ENOVA PANTHER
PROPULSION SYSTEMS. ENOVA SYSTEMS MAKES NO OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OR NONINFRINGEMENT.
ENOVA SYSTEMS SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL
DAMAGES.
20 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
Contract Number 11072001
Appendix 7
Prices and Other Commercial Terms
1. Prices.
[REDACTED]*
2. LEAD TIME
[REDACTED]*
3. RESCHEDULE AND CANCELLATION TERMS
[REDACTED]*
21 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
Appendix 8
Non-Disclosure Agreement
Enova Systems, a corporation organized under the laws of California and Moriah
Corporation, a Japanese Corporation, desire to explore certain possible business
transactions and in facilitating that, it is understood and agreed that certain
business and trade information which the parties deem confidential may be
provided or disclosed by one to the other:
In consideration of the receiving party being granted access or continued access
to such information, it is agreed as follows:
1. "INFORMATION" shall mean any information, technical data or
know-how relating to the business, services or products of the disclosing party
or a third party, including without limitation any research, products, services,
developments, inventions, processes, techniques, designs, components, parts,
documents, drawings, electronic files, data sketches, plans, programs,
specifications, software, and/or distribution, engineering, marketing,
financial, merchandising, sales, and salary information and/or other materials
(hereinafter collectively referred to as "INFORMATION") which is disclosed by
such party or on its behalf, before or after the date hereof, to the other party
or its employees or agents, directly or indirectly, in writing, orally,
electronically, or by drawings or inspection. "INFORMATION" does not include
information, technical data or know-how which the receiving party establishes:
(i) is already published or available to the public other than by a breach of
this Agreement or any confidentiality obligation owed to the disclosing party;
(ii) is rightfully received from a third party without, and not in breach of,
any obligation of confidentiality; (iii) is independently developed by personnel
or agents of the receiving party without access to the INFORMATION of the other;
(iv) is known to the receiving party at the time of disclosure without an
obligation of confidentiality; or (v) is produced in compliance with applicable
law or a court order, provided that the receiving party first gives the
disclosing party reasonable notice of such law or order and gives the disclosing
party opportunity to oppose and/or attempt to limit such production.
2. The receiving party shall hold in trust and confidence, and not
disclose to others, by any means, any and all INFORMATION disclosed under this
Agreement. INFORMATION may be used by the receiving party only for the purpose
of considering or pursuing a business relationship or business transaction with
the disclosing party. The receiving party may disclose INFORMATION received
under this Agreement to persons within its organization who have a need to know
such information and only if such persons are bound in writing (pursuant, for
example to a general employee non-disclosure agreement protecting third party
confidential information as well as the employer's confidential information) to
protect the confidentiality of such INFORMATION. The receiving party further
agrees it shall take the same measures, but no less than reasonable security
measures, and use the same care, but no less than a reasonable degree of care,
to preserve and protect the secrecy of, and to avoid disclosure or unauthorized
use of, the disclosing party's INFORMATION as it uses with its own information
of similar importance. With respect to tangible materials constituting
INFORMATION the receiving party agrees not to analyze any such materials for
composition or structure.
3. Title to all property received by the receiving party from the
disclosing party, including all INFORMATION, shall remain at all times the sole
property of the disclosing party, and this Agreement shall not be construed to
grant to receiving party any licenses or similar rights to such property or
INFORMATION (including all intellectual property) disclosed to the receiving
party hereunder. Nothing in this Agreement shall limit or restrict the rights of
the disclosing party to assert infringement or other intellectual property
claims against the receiving party or to impose on either party any obligation
to disclose any INFORMATION or to purchase or sell any products.
22 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
4. The receiving party shall, upon request of the disclosing party: (i)
return to the disclosing party all documents, drawings, equipment and other
tangible materials, including all INFORMATION and all manifestations thereof,
delivered to the receiving party under this Agreement, and all copies and
reproductions thereof; and (ii) certify to the disclosing party that all such
INFORMATION has been returned.
5. The receiving party's duties under Section 2 of this Agreement
expire with respect to any particular item of INFORMATION five years after the
date of disclosure hereunder to the receiving party, or three years after the
expiration or termination of the relationship between the parties to this
Agreement, whichever is later.
6. The parties further agree to the following terms and conditions:
(a) Neither party shall without the prior written consent of
the other party disclose to a third party any aspect of the commercial
relationship between the parties including, but not limited to, pricing, items
or quantities offered or sold, payment terms, production methods or schedules,
delivery locations and means and suppliers. Each party agrees not to issue any
press release or make any statement on the Internet, America on Line,
CompuServe, Prodigy or any other public electronic network, or to any analysts
or reporters concerning the other party or its products or services, without the
other party's prior written authorization.
(b) Receiving party shall adhere to the U.S. Export
Administration Laws and Regulations and shall not export or re-export any
technical data or products received from the disclosure or the direct product of
such technical data to any proscribed countries.
(c) Any breach by the receiving party of its obligations under
this Agreement will result in irreparable injury to the disclosing party for
which damages and other legal remedies will be inadequate. In seeking
enforcement of any of these obligations, the disclosing party will be entitled
(in addition to other remedies) to preliminary and permanent injunctive and
other equitable relief.
(d) If any provision of this Agreement is invalid or
unenforceable, then such provision shall be construed and limited to the extent
necessary, or severed if necessary, in order to eliminate such invalidity or
unenforceability, and the other provisions of this Agreement shall not be
affected thereby.
(e) No delay or omission by either party in exercising any
right under this Agreement will operate as a waiver of that or any other right.
A waiver or consent given by either party on any one occasion is effective only
in that instance and will not be construed as a bar to or waiver of any right on
any other occasion.
(f) This Agreement shall be binding upon and will inure to the
benefit of the parties hereto, and their respective successors and assigns.
(g) This Agreement is governed by and will be construed in
accordance with the laws of the State of California, and the state and federal
courts of California shall be the exclusive forum.
(h) This Agreement supersedes all prior agreements, written or
oral, between the disclosing party and receiving party (or their respective
predecessors in interest) relating to the subject matter of this Agreement. This
Agreement may not be amended except by an agreement in writing signed by both
parties that specifically refers to this Agreement.
Moriah Corporation ENOVA SYSTEMS
By:_______________________________ By:_______________________________
[REDACTED]* [REDACTED]*
Date: Date:
---------------------------- ----------------------------
23 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
Appendix 9
Additional Terms for Development Efforts
The following provisions pertain solely to the Development Efforts and supersede
any different or inconsistent provisions elsewhere in the Agreement, including
those in Appendix 10.
1.0 Development Program Responsibilities.
1.1 Joint Responsibilities. In performing the Development Efforts, each
party shall
1.1.1 Cooperate and collaborate fully with the other and use
their commercially reasonable efforts to develop the Prototype;
1.1.2 Devote such amount of materials, number of personnel and
other physical and available financial resources as shall reasonably be required
to complete the development of the Prototype within the time-frame specified in
this Agreement;
1.1.3 Keep the other party timely informed of (i) the progress
of the development of Prototype or part thereof that such party is separately
undertaking, and (ii) immediately communicate to the other party all material
matters relating to or arising from the development of Prototype or part
thereof; including but not limited arranging and attending quarterly business
and technical review meetings;
1.1.4 Conduct collaboration and review meetings on a regular
basis and upon the reasonable request of the other party; and
1.1.5 Upon the reasonable request of the other party,
disclose, pursuant, and subject, to this Agreement, such information as shall
reasonably be required by each party to complete the development of the
Prototype.
1.1.6 Perform such other joint responsibilities as may be
described in Appendix 3.
2.0 Warranty Disclaimer. EACH PARTY ACKNOWLEDGES TO THE OTHER THAT THE
DEVELOPMENT EFFORTS ARE EXPERIMENTAL IN NATURE AND THAT NO WARRANTY IS PROVIDED
FOR THE SERVICES OR THE PRODUCTS AND MATERIALS PROVIDED HEREUNDER. WITHOUT
LIMITATION, EACH PARTY DISCLAIMS, TO THE EXTENT PERMITTED BY LAW, ALL
WARRANTIES, WHETHER EXPRESS, IMPLIED, OR STATUTORY, INCLUDING, BUT NOT LIMITED
TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE,
AND NONINFRINGEMENT.
3.0 Intellectual Property Rights and Work Product Ownership.
3.1 Intellectual Property Rights Defined. For purposes of this
Agreement, "Intellectual Property Rights" means a party's intellectual property
and proprietary rights, however characterized, including, but not limited to
ideas, processes, techniques, inventions, formulas, technologies, know-how,
data, discoveries, works of authorship, copyrightable works, patent rights,
trade secret rights, copyright rights, trademark rights, service xxxx rights,
and any enhancements, improvements, derivative works, and other derivations
thereof (whether now in existence or hereafter developed, invented or otherwise
derived).
3.2 Ownership of Intellectual Property Rights. Each party shall retain
ownership of all its pre-existing Intellectual Property Rights notwithstanding
their disclosure and use hereunder. To the extent that Development Efforts
result in the creation of new Intellectual Property Rights, Purchaser shall own
all new Intellectual Property Rights relating to the Prototype (excluding those
relating to the Panther Drive System but including the unique data, if any,
concerning the interface of the drive system to the
24 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
Prototype) and Enova shall own all new Intellectual Property Rights relating to
electric and hybrid drive systems, including, without limitation, the Panther
Drive Systems. To the extent that a new Intellectual Property Right is created
that cannot be described by the foregoing sentence, it shall be jointly owned
with no obligation to account to the other party thereof.
3.3 Materials and Work Product. Except for items described in Section
5.0 to Appendix 3, which Purchaser is to purchase in connection with the
Development Efforts and which shall become the property of Purchaser upon
payment thereof, all materials and equipment that a party uses in connection
with the Development Efforts and all work product produced a party during the
course of the Development Efforts shall remain the sole and exclusive property
of that party.
4.0 Payments and Expenses.
4.1 Expenses. Except as otherwise specified below or in Xxxxxxxx 0,
Xxxxxxxxx shall be responsible for all expenses incurred by it in connection
with the Development Efforts, including, without limitation, the travel,
lodging, and living expenses of Purchaser personnel traveling to Enova
facilities, and Enova shall be responsible for all expenses incurred by it in
connection with the Development Efforts, including, without limitation, the
travel, lodging, and living expenses of Enova personnel traveling to Purchaser
facilities.
4.1.1 Panther Drive System. Purchaser will pay the amount
specified in Appendix 3 for any Panther Drive System, parts, or equipment to be
purchased at the prices set forth in Appendix 3.
4.1.2 Training and Technical Materials. Purchaser will pay
Enova's cost, plus ten percent (10%) for training and technical materials that
Enova delivers to Purchaser for use by Purchaser personnel in connection with
the Development Efforts.
4.2 Freight and Taxes. The foregoing price is inclusive of shipping and
insurance to Purchaser's designated facility, but does not include any taxes,
fees, duties or assessments incurred by either party in connection with the
purchase, shipment and delivery of the Panther Drive System, all of which shall
be paid by Purchaser (except for those imposed on Enova for the income received
in the sale).
25 of 26
Enova Systems Proprietary and Confidential
Enova Panther(TM) Propulsions System Product and Services Agreement
Appendix 10
Additional Terms for Commercial Production
and
Additional General Terms
The following provisions amend and modify the provisions of the Agreement except
for those relating to the Development Efforts and supersede any inconsistent
provisions therein.
None
26 of 26
Enova Systems Proprietary and Confidential
