EXHIBIT 10(z)
AGREEMENT FOR PARTICIPATION IN THE
IBM BUSINESS PARTNER - PC, AUTHORIZED ASSEMBLER PROGRAM
THIS AGREEMENT ("Agreement") is entered into by and between International
Business Machines Corporation, a New York corporation maintaining a place of
business at Xxxxx 000, Xxxxxx, Xxx Xxxx 00000 ("IBM"), and CompuCom Systems,
Inc., a state of Delaware corporation maintaining a place of business at 00000
Xxxxx Xxxxxxx Xxxxxxxxxx; Xxxxxx, Xxxxx 00000 ("You"), effective as of the 16th
day of January, 1997.
WHEREAS, IBM desires to expand its personal computer fulfillment capabilities by
authorizing a number of integrators to assemble and test IBM personal computer
products for sale to Resellers and End Users (as defined below); and
WHEREAS, these IBM authorized Integrators ("Authorized Assemblers") must meet
and maintain qualifications established by IBM as set forth more fully herein to
protect IBM's goodwill and long-standing reputation for high quality personal
computer products; and
WHEREAS, You desire to become an Authorized Assembler subject to the terms and
conditions of this Agreement.
NOW, THEREFORE, in exchange for good and valuable consideration, the receipt and
sufficiency of which are hereby acknowledged, the parties hereto agree as
follows:
1. AGREEMENT. Except as expressly provided herein, this Agreement constitutes
the complete and exclusive statement of the agreement and understanding
between the parties governing the IBM Business Partner - PC, Authorized
Assembler Program ("Authorized Assembler Program"). Neither party is
relying upon any representations, promises, commitments or guarantees of
the other party about the financial benefits or profitability of this
program other than that which is expressly set forth herein. This Agreement
supersedes all other proposals, prior agreements, and other communications,
oral or written, between the parties regarding the Authorized Assembler
Program and any predecessor program(s). Except as expressly provided
herein, this Agreement does not modify or alter the IBM Business Partner
Agreement in effect between You and IBM. All other terms and conditions of
your IBM Business Partner Agreement not expressly modified by this
Agreement shall continue to apply to You while performing as an Authorized
Assembler.
2. DEFINITIONS. For purposes of this Agreement, the following definitions
shall apply:
(a) "Agreement" includes this Agreement, all exhibits, appendices, attachments
and amendments hereto, which are hereby incorporated by reference,
including those that may become effective in the future.
Page 1
(b) "Appendix A" refers to the IBM standard machine type model assembly and
testing process documents that will be updated from time-to-time by IBM as
provided in Section 18.
(c) "Appendix B" refers to the custom solution and rework process documents
that will be updated from time-to-time by IBM as provided in Section 18.
(d) "Approved Component" means personal computer hardware parts (e.g., hard
files, memory XXXXX, adapter cards), miscellaneous assembly parts (e.g.,
screws, brackets, cables), and product ship groups (e.g., publications,
power cords), all of which are supplied by IBM and approved in the xxxx of
materials included in Appendix A or by IBM in writing as provided in
Appendix B for each Approved Product.
(e) "Approved Location" is a site controlled and operated by You in the United
States at which we authorize You to perform your responsibilities under
this Agreement. Certain Authorized Assembler Program requirements,
including, but not limited to, minimum number of trained personnel and pre-
assembly certification, must be met at each Approved Location.
(f) "Approved Product" is any IBM personal computer product that You are
authorized to configure under the Authorized Assembler Program. An Approved
Product is assembled and tested by You from a Base System Unit and Approved
Components according to the specifications set forth in Appendix A or
Appendix B, as appropriate. Except as otherwise provided in this Agreement,
Approved Products assembled by You in full and complete compliance with the
terms of this Agreement shall be governed as "Products" under the terms of
the IBM Business Partner Agreement.
(g) "Base System Unit" is an IBM personal computer system unit, including a
keyboard and mouse where appropriate, supplied by IBM and listed in
Appendix A or approved by IBM in writing as provided in Appendix B as the
base model from which an Approved Product is configured.
(h) "End User" is anyone unaffiliated with You who acquires Approved Products
for its own use and not for resale.
(i) "IBM Business Partner Agreement" includes the IBM Business Partner
Agreement Remarketer General Terms, its profiles, appendices, exhibits, and
transaction documents, as amended from time-to-time, entered into between
You and IBM.
(j) "Other Software" refers to software programs and other code, excluding
Software Images and Test Software, provided by IBM under the Authorized
Assembler Program to You to be used by You to make the Software Image or
any software program or code pre-installed on the Base System Unit or an
Approved Component operate as designed on the Approved Product. "Other
Software"
Page 2
includes device drivers, approved vendor patches, BIOS and licensed
internal code upgrades but does not include such programs and code already
preloaded by IBM on a personal computer system or included on a diskette or
CD packaged and shipped by IBM with a Base System Unit or an Approved
Component.
(k) "Preload" refers to the process by which You are authorized, subject to the
terms of this Agreement, to load from the master media provided by IBM a
single copy of the designated Software Image onto the hard drive of an
Approved Product.
(l) "Removed Parts" refers to parts removed by You from a Base System Unit when
assembling certain Approved Products pursuant to this Agreement.
(m) "Reseller" includes any personal computer system remarketer to whom You are
authorized to resell personal computer products under the terms of your IBM
Business Partner Agreement.
(n) "Software Image" means the image, which includes software programs and
other code written by IBM or third parties, provided by IBM under the
Authorized Assembler Program to You for You to Preload or otherwise have
IBM install only on Approved Products according to the terms of this
Agreement. "Software Image" shall not include any operating system software
image or other software program or code included by IBM on a pre-installed
hard drive or included on a diskette or CD packaged and shipped by IBM with
a Base System Unit or Approved Component.
(o) "Subsidiary" means a corporation, company or other entity for which a party
to this Agreement now or hereafter owns or controls, directly or
Indirectly:
(1) more than fifty percent (50%) of the outstanding shares or securities
representing the right to vote for the election of directors or other
managing authority, but such corporation, company or other entity
shall only be deemed to be a Subsidiary only for so long as such
ownership or control exists; or
(2) more than fifty percent (50%) of the ownership Interest representing
the right to make decisions for such corporation, company or other
entity if such corporation, company or other entity does not have
outstanding shares or securities, as may be the case in a partnership,
joint venture or unincorporated association, but such corporation,
company or other entity shall only be deemed to be a Subsidiary only
for so long as such ownership or control exists.
(p) "Test Software" refers to software programs and other code, excluding
Software Images and Other Software, provided by IBM under the Authorized
Assembler Program to You to be used by You in assembling and testing
Approved Products
Page 3
pursuant to Appendices A and B, as applicable. Test Software includes
diagnostics code and virus protection software.
3. AUTHORIZATION. Provided that You comply fully with the terms of this
Agreement, You are hereby authorized by IBM to assemble and test Approved
Products bearing the IBM logo for sale under the terms of the IBM Business
Partner Agreement to Resellers and End Users. With prior written approval
from IBM, which approval may be withheld in IBM's sole discretion, You may
authorize your Subsidiaries located in the United States to assemble and
test Approved Products at Approved Locations pursuant to the terms of this
Agreement provided that You hereby unconditionally guarantee each of your
authorized Subsidiaries' full and complete compliance with the terms of
this Agreement. Pursuant to this guarantee, IBM shall not be required to
make demand upon your authorized Subsidiary as a condition to making demand
upon You. Each authorized Subsidiary shall co-execute this Agreement, and
the term "You" as used herein shall include all authorized Subsidiaries who
co-execute this Agreement and are approved in writing by IBM to assemble
and test Approved Products hereunder.
4. MINIMUM PARTICIPATION COVENANT. You agree to use your best efforts to
purchase a sufficient number of Base System Units and Approved Components
to enable You to assemble and test Approved Products listed in Appendix A
for at least twenty percent (20%) of your actual sales volume of personal
computer system units per Approved Product family of products as measured
on a calendar year, or any portion thereof.
5. ALLOCATION AND ORDERING. You agree to provide IBM with forecasts of your
requirements for and current on-hand inventory of Base System Units and
Approved Components weekly or otherwise upon request from IBM. IBM will
allocate Base System Units and Approved Components to You in IBM's sole
discretion upon consideration of your forecasts, your current on-hand
inventory, your actual sales, availability and other business factors
deemed relevant by IBM. You agree to use your best efforts to purchase the
total number of Base System Units and Approved Components that are
allocated to You, up to the greater of the amount of your forecast or your
minimum order replenishment requirements, if any. You agree to order
Approved Components in the minimum order quantities (MOQs) that can be
shipped in bulk as described in Appendix A. Except as otherwise provided in
this Agreement, your orders for Base System Units and Approved Components
will be governed as "Products" under the IBM Business Partner Agreement.
6. TITLE AND RISK OF LOSS.
(a) Hardware. From the point and time of shipment to You by IBM, You shall hold
title and all ownership interest and bear all risk of loss in all Base
System Units and Approved Components purchased by You, subject to any
applicable IBM financing terms.
Page 4
(b) Software. Title to Software Images, Test Software and Other Software is not
transferred by IBM. Except as expressly provided herein, this Agreement
does not grant You any rights of any kind under any IBM or third-party
patents, copyrights, trademarks, service marks or other intellectual
property and does not authorize You to use, copy, sublicense, sell,
distribute or prepare derivative works based upon any Software Images, Test
Software, Other Software or publications provided by IBM under this
Agreement.
7. ASSEMBLY AND TESTING.
(a) IBM's Responsibilities. IBM will provide initial training for your
personnel in the IBM assembly and testing processes described in Appendix A
and Appendix B. IBM must certify your initial compliance with the assembly
and test processes, including your handling of any Returned Parts, Software
Images, Test Software and Other Software, at each location before You will
be authorized by IBM to assemble and test Approved Products under this
Agreement at such location.
(b) Your Responsibilities. You represent, warrant and agree to:
(1) assemble and test Approved Products in full and complete compliance
with Appendix A or Appendix B, as applicable, using only IBM-approved
tools, equipment, Test Software and Other Software, and that the
Approved Products will be free from defects in your workmanship under
normal use and operation;
(2) assemble Approved Products using only Base System Units and Approved
Components that are new and unused unless the Approved Product, all
related packaging, all marketing materials, bid documents, and
invoices are conspicuously and permanently marked to identify the
Approved Product as containing "used" parts;
(3) create an electronic assembly record for each Approved Product in the
format prescribed in Appendix A or Appendix B, as applicable, and
transmit it to IBM via electronic data transmission no later than
forty-eight (48) hours after completion of assembly;
(4) include, in unmodified form, all publications, license agreements,
certificates of authenticity, labels and ship groups with each
Approved Product as set forth in the Approved Product's xxxx of
materials in Appendix A or as approved by IBM in writing as provided
in Appendix B;
(5) comply with all packaging and labeling requirements for the Approved
Product as provided in Appendix A or Appendix B, as appropriate;
(6) remove and return all Removed Parts in new and unused condition in the
manner prescribed in Appendix A or forfeit the reconciliation credit
for
Page 5
assembling the Approved Product listed in Appendix A from which the
parts were removed (the return of new and unused Removed Parts under
Appendix B is optional and subject to IBM approval);
(7) issue IBM-assigned Internet passcodes only to persons with actual
authority to commit You to the terms and conditions of any contracts
and licenses relating to the Authorized Assembler Program which may be
placed on the Internet by IBM, which contracts and licenses, if any,
are hereby incorporated by reference;
(8) use Appendices A and B only in a manner that is consistent with
participation in the Authorized Assembler Program and not to
distribute copies of such Appendices (in any form) outside of your
organization;
(9) make only such copies of Appendices A and B as are necessary for the
performance of your obligations under this Agreement, restrict access
to such necessary copies only to your employees with a need to know
for purposes of fulfilling your responsibilities under this Agreement,
and destroy all superseded copies of Appendices A and B except for no
more than two (2) file copies;
(10) assemble and test Approved Products only at Approved Locations;
(11) document your plan for obtaining ISO 9002 certification, or such
higher level certification specified by IBM, and obtain and maintain
such certification as described more fully in Appendix A;
(12) maintain a sufficient number (but not less than two (2)) of IBM-
trained assembly technicians at each Approved Location to enable You
to satisfy your responsibilities under this Agreement;
(13) provide ongoing assembly and testing training to your personnel;
(14) return to IBM pursuant to a valid IBM returns authorization any parts
that fall in the assembly and testing process along with failure
documentation specified by IBM in Appendix A and Appendix B, as
appropriate;
(15) acquire and maintain any tools and equipment necessary to perform the
assembly and testing processes described in Appendix A and Appendix B,
as appropriate;
(16) use, to the extent not otherwise expressly required by this Agreement,
a reasonable and workmanlike manner in assembling and testing Approved
Products pursuant to this Agreement; and
(17) use Approved Components that IBM offers for use only in the Authorized
Assembler Program (such as certain features and options or the
operating
Page 6
system publication packs, all of which are identified in Appendix A
and the IBM ordering system as available only to Authorized
Assemblers) solely for integration into the Approved Products for
which they are designated in Appendix A or approved by IBM in writing
as provided in Appendix B, and You agree not to distribute or resell
such restricted use Approved Components separate from an Approved
Product; provided, however, that these restrictions on use,
distribution and resale shall not apply to Approved Components that
are generally available from IBM in the same unit size to Authorized
Assemblers and other resellers alike but are merely in different
packaging.
8. PRELOADING.
(a) IBM's Responsibilities. IBM shall provide You the master media
containing the Software Image, if any, specified for the Approved
Products that You are authorized to Preload. Subject to your
compliance with the terms of this Section 8, IBM grants You a
revocable, non-exclusive, non-transferrable right and license to
Preload onto an Approved Product a single copy of the Software Image
designated for such Approved Product in the xxxx of materials in
Appendix A or otherwise approved by IBM in writing as provided in
Appendix B. As a condition to your assembling and testing certain
Approved Products under the Authorized Assembler Program, IBM, at its
sole discretion, may elect to control the master media and the preload
process for certain Software Images. Provided that You comply with the
terms of this Agreement, IBM authorizes You to distribute Software
Images Preloaded by You, or loaded by an IBM-controlled process, on
the Approved Product. IBM may revoke these grants and authorizations
in whole or in part at any time in its sole discretion.
(b) Your Responsibilities. You represent, warrant and agree:
(1) to use the master media, and the Software Images obtained
therefrom, only at an Approved Location and only to Preload, or
otherwise have IBM install, in a manner expressly permitted by
IBM, a single copy of the Software Image designated for each
Approved Product in the xxxx of materials in Appendix A or
otherwise approved by IBM in writing as provided in Appendix B
onto the Approved Product, and for no other purpose whatsoever;
(2) that IBM may require, in order for You to be authorized under
this Agreement to Preload certain Software Images containing
programs and other code developed and owned by Microsoft
Corporation pursuant to the terms of IBM's license agreements
with Microsoft, that You execute and fully comply with the terms
of a Software Installation Agreement in the form attached hereto
as Exhibit 1, which is incorporated herein by reference;
(3) to ensure that the End User has an opportunity to review the IBM
Program License Agreement and the license agreements covering
third-party software programs and code, if any, before purchasing
the Approved Product and
Page 7
accepts such license agreements as a condition to such purchase,
and to otherwise distribute Approved Products in full compliance
with the terms and conditions of this Agreement and the IBM
Business Partner Agreement;
(4) to provide IBM with the electronic assembly record specified in
Appendix A or Appendix B, as appropriate, for all Approved
Products containing a Software Image;
(5) to maintain adequate business controls for the master media, and
the Software Images obtained therefrom, to prevent unauthorized
use or copies of any Software Image;
(6) not to copy or permit the copying (including back-up copies) of
all or any part of any Software Image, except as expressly
authorized by this Agreement;
(7) not to sublicense, rent, lease, distribute, assign or otherwise
transfer (including distributing back-up copies of) all or any
part of any Software Image, except as expressly authorized by
this Agreement;
(8) not to reverse engineer, disassemble, or decompile all or any
part of any Software Image provided by IBM;
(9) not to remove any Authorized Assembler Identification code that
may be placed on the Software Image by IBM;
(10) not to add to, delete from, or otherwise modify any software
program or other code included in the Software Image, or create
any derivative work therefrom;
(11) to make all payments due, if any, for any additional software
programs or other code You add to the Software Image;
(12) to comply with any additional requirements related to the
Software Image as set forth in Appendix A or Appendix B, as
appropriate; and
(13) not to export Approved Products containing any Software Image to
a country where the associated license agreement is not valid.
(c) Third-Party Rights. IBM's authority to authorize You to Preload
certain software programs and other code included in the Software
images derives from license agreements between IBM and third-party
software vendors. You agree that each software vendor is a third-party
beneficiary of the terms of this Section 8 with respect to the
software programs and other code that such vendor owns which is
included In any Software Image included on an Approved Product. The
software Vendor shall have a right to enforce such terms against You
to the same extent that
Page 8
IBM may enforce such terms against You. You shall notify IBM
immediately if a third-party software vendor seeks to enforce any
terms under this Agreement.
9. TEST SOFTWARE AND OTHER SOFTWARE.
(a) IBM's Responsibilities. IBM will provide You with a copy of the applicable
Test Software and Other Software. Subject to your compliance with the terms
of this Section 9, IBM grants You a revocable, non-exclusive, non-
transferrable right and license to the extent expressly described in
Appendix A or Appendix B, as appropriate: (i) to download the Test Software
and Other Software from IBM's homepage on the Internet, if necessary, and
to make one copy of the Test Software and Other Software for each
workstation dedicated to the Authorized Assembler Program, (ii) to use the
Test Software to assemble and test Approved Products, and (iii) to use and
install Other Software where appropriate on Approved Products. Provided You
comply with all of the terms of this Agreement, IBM authorizes You to
distribute Other Software installed by You on the Approved Product. IBM may
revoke theses grants and authorizations in whole or in part at any time in
its sole discretion.
(b) Your Responsibilities. You represent, warrant and agree:
(1) to download and use the Test Software on workstations dedicated to the
Authorized Assembler Program only for assembling and testing Approved
Products in the manner and to the extent expressly permitted in
Appendix A or Appendix B, as appropriate;
(2) to use and install the Other Software only on Approved Products in the
manner and to the extent expressly permitted in Appendix A or Appendix
B, as appropriate;
(3) to maintain adequate business controls for the Test Software and Other
Software provided by IBM to prevent unauthorized use or copies;
(4) not to copy or permit the copying (including back-up copies) of all or
any part of any Test Software or Other Software, except as expressly
authorized by this Agreement;
(5) not to sublicense, rent, lease, distribute, assign or otherwise
transfer (including distributing back-up copies of) all or any part of
any Test Software or Other Software, except as expressly authorized by
this Agreement;
(6) not to reverse engineer, disassemble, or decompile all or any part of
any Test Software or Other Software provided by IBM;
(7) not to add to, delete from, or otherwise modify the Test Software or
Other Software, or create any derivative work therefrom; and
Page 9
(8) not to export Approved Products containing any Other Software to
countries where the associated license agreement is not valid.
10. QUALITY, RELIABILITY AND SAFETY.
(a) IBM's Rights. IBM reserves the right to immediately suspend your authority
to assemble Approved Products if IBM determines, in its sole discretion,
that Approved Products assembled and tested by You fail to meet required
specifications, whether or not You are at fault.
(b) IBM's Responsibilities. IBM will test the standard configuration of the
machine type models (i) designated in Appendix A as either Base System
Units or Approved Products, or (ii) approved as Base System Units by IBM in
writing pursuant to Appendix B, prior to including such models in the
Authorized Assembler Program to ensure that such configurations meet FCC,
UL and other specifications required by IBM.
(c) Your Responsibilities. You represent, warrant and agree that:
(1) all Approved Products which You assemble and resell will comply fully
and completely with all functional, quality, reliability, and other
specifications identified in Appendix A or Appendix B, as appropriate,
including all FCC, UL, consumer product safety, and other applicable
agency specifications and requirements;
(2) to the extent not otherwise expressly required by this Agreement, the
functional, quality, reliability and other specifications that You
utilize for an Approved Product will exceed industry requirements;
(3) You will immediately stop assembling Approved Products upon the
request of IBM due to any quality, reliability, safety, or other
reasons;
(4) You will comply with any Approved Product recall process established
by IBM;
(5) You will only assemble Approved Products pursuant to the assembly and
test processes set forth in Appendix A or Appendix B, as appropriate,
and You will not modify or alter the subassemblies of any Base System
Units or Approved Components, including, but not limited to, the power
supplies, processors, planars or mechanical subassemblies;
(6) You will add to an Approved Product only additional components (IBM or
otherwise) that are (i) certified by IBM either in the original
request for announcement or white letter for the Approved Product or
by the IBM Cross Brand Configuration laboratory, and (ii) approved by
the appropriate
Page 10
agencies (FCC, UL, etc.) for integration with such configuration;
provided, however, that You may add other additional components
subject to the terms of Subsection 10(c)(1) above and Subsection
10(c)(11) below.
(7) You will not use any ozone-depleting substances in your assembly and
test processes for Approved Products, and You will comply with all
environmental laws and regulations regarding the disposal of materials
used in the assembly and test processes;
(8) Effective for all Approved Products assembled on such date as mutually
agreed to by IBM and The Business Partner in writing, You will
transmit to IBM an electronic assembly record with sufficient
information for IBM to determine what additional components (IBM or
otherwise), if any, were incorporated into the Approved Product;
(9) You will cooperate fully with IBM during periodic audits of quality,
reliability, FCC and UL certification, and your compliance with the
terms of this Agreement, and You agree to make any changes and
improvements required by IBM in a timely manner;
(10) You will be warranty service capable on each type of Approved Product
You assemble and test under this Agreement, or You will have
procedures in place to provide warranty service for such Approved
Products through IBM-SERV or the IBM Authorized Servicers Program;
(11) You will not submit an End User warranty claim for payment by IBM on
an Approved Product assembled and tested by You if the cause of the
failure of the Approved Product is due to your failure to comply fully
and completely with all functional, quality, reliability, and other
specifications required by this Agreement, your inclusion in the
Approved Product of additional components that do not comply with
Subsection 10(c)(6)(i) and (ii) above, or your poor workmanship in
the assembly and test process, and You will reimburse IBM for any
expenses incurred relating to such non-compliance or poor workmanship;
(12) You will comply with all applicable laws, ordinances, rules and
regulations in the performance of your obligations under this
Agreement (in particular, as such relate to workplace safety);
(13) You will periodically assess and continuously improve your quality as
an Authorized Assembler in accordance with procedures under ISO 9002,
or such higher level certification specified by IBM; and
(14) You will track data on failure rates in the assembly process and
provide this data to IBM as provided in Appendix A or Appendix B, as
appropriate.
Page 11
11. DISTRIBUTION AND RESALE.
(a) IBM's Responsibilities. IBM's sole responsibilities regarding distribution
and resale of the Approved Products are set forth in the IBM Business
Partner Agreement.
(b) Your Responsibilities. You represent, warrant and agree:
(1) to sell and distribute Approved Products according to the terms of the
IBM Business Partner Agreement;
(2) to specify in all bids, proposals, and sale invoices provided by You
to Resellers or End Users: (i) that the Approved Product was assembled
by You pursuant to the Authorized Assembler Program; (ii) the standard
machine type model number and the part numbers of all additional
components (IBM or otherwise) that are included in a configuration
assembled under Appendix A, including a clear and conspicuous
reference to the manufacturer of all such additional components; (iii)
the part numbers of the Base System Unit from which the Approved
Product was assembled and all Approved Components, Software Images,
and additional components (IBM or otherwise) that are included in a
configuration assembled under Appendix B, including a clear and
conspicuous reference to the manufacturer of all such additional
components; and (iv) the appropriate warranty terms, as described in
Appendix A or Appendix B, as applicable, for the Approved Product and
any additional components (IBM or otherwise);
(3) not to specify in any bids, proposals, or sales invoices provided by
You to Resellers or End Users a separate price for Software Images or
for Approved Components related to software (e.g., publication packs,
operating system CDS and diskettes, etc.);
(4) that, if You have not complied with the terms of this Agreement in
assembling and testing a personal computer system, You will not: (i)
represent that such personal computer system was assembled by You
under the Authorized Assembler Program; or (ii) use an IBM-designated
machine type model number to identify such personal computer system.
(5) that You will comply with all applicable laws in marketing or
transshipping any Base System Units, Approved Components, or Approved
Products that are used or that contain used parts, including, but not
limited to, conspicuously and permanently marking the Base System
Unit, Approved Component, and/or Approved Product, all related
packaging, all marketing materials and point of sale displays, and the
associated sales invoice to identify it as used or as containing used
parts;
Page 12
(6) that You will only represent that the Approved Products assembled by
You were assembled pursuant to an ISO 9002 (or higher level) certified
process if You have obtained such certification; and
(7) that You will not export Approved Products unless: (i) exporting of
such Approved Products is permitted by the IBM Business Partner
Agreement; and (ii) You comply with all applicable laws and
regulations of the United States and any other applicable
jurisdiction.
12. IBM INTELLECTUAL PROPERTY; GRANT OF LIMITED RIGHTS AND LICENSE.
(a) It is acknowledged by the parties that the design of the Approved Products
and all unique IBM tooling was developed under IBM's direction and at IBM's
expense. Those features and processes, as well as any other features and
processes which may be subsequently developed under IBM's direction and at
IBM's expense, are the proprietary and confidential designs of IBM and are
the sole and exclusive property of IBM. You agree that all right, title and
interest therein shall at all times vest and remain in IBM. You recognize
that IBM has invested considerable time and money in developing and
protecting its proprietary and intellectual property rights and in creating
goodwill and a reputation for excellence with respect to the Approved
Products.
(b) IBM owns or has the right to reproduce, license, sell and/or distribute all
proprietary or intellectual property rights in the Approved Products. To
the extent necessary to assemble, test, sell and distribute the Approved
Products solely pursuant to the terms of this Agreement, IBM grants You a
revocable, non-exclusive, non-transferrable, royalty-free, limited right
and license under any trade secret (if any), patent application or patent
owned or licensable by IBM that is embodied in the Approved Products or in
the assembly and testing procedures therefore, to make, use for test
purposes only, sell, and/or otherwise transfer the Approved Products,
either alone or in combinations with equipment or software or both, in
accordance with the terms and conditions of this Agreement. Any information
deemed by IBM to be a trade secret will be disclosed only pursuant to the
terms of a confidential disclosure agreement.
(c) Further, IBM grants You a revocable, non-exclusive, non-transferrable,
royalty-free limited right and license to use, in connection with the
assembly, testing, sale or distribution of Approved Products solely in
accordance with this Agreement, the Approved Product name(s) and
trademark(s) used by IBM to identify the Approved Products, including any
portion thereof; provided, however, that IBM reserves the right to review
and disapprove any references to "IBM" or any of IBM's trademarks. IBM has
ownership and title to the trademark "IBM", all other trademarks and trade
names of IBM, and the goodwill attaching thereto, and You agree that any
goodwill which accrues because of your use of the trade name "IBM"
Page 13
or any other trademarks or trade names of IBM shall vest in and become the
property of IBM.
(d) Except as otherwise provided in this Section 12 or in Sections 8 and 9 of
this Agreement, You shall not have any rights, interest or license in,
whether by implication, estoppel or otherwise, any US or foreign
copyrights, trademarks, trade names, trade secrets and/or patents
applicable in the Approved Products. IBM may revoke any of these grants at
any time in its sole discretion.
13. CREDITS AND ADJUSTMENTS.
(a) Standard Machine Type Models. Provided that You comply with all the terms
and conditions of this Agreement in assembling and testing Approved
Products under Appendix A, unless expressly provided otherwise herein and
to the extent permitted and/or required by law, after You transmit to IBM
the electronic assembly record, IBM will credit any amounts You owe IBM for
an amount equal to (a) the sum of the lowest prices generally published by
IBM to similarly-situated Authorized Assemblers for the Base System Unit
and the Approved Components required and used by You to assemble an
Approved Product under Appendix A, less (b) the lowest price generally
published by IBM to similarly-situated resellers who are not participating
in the Authorized Assembler Program for the Approved Product. Applicable
prices will be determined as of the date You transmit to IBM the electronic
assembly record required by Appendix A.
(b) Custom and Rework Models. Provided that You comply with all the terms and
conditions of this Agreement in assembling and testing Approved Products
under Appendix B, unless expressly provided otherwise herein and to the
extent permitted and/or required by law, IBM will authorize You to return
certain Removed Parts, subject to any limitations set forth in Appendix B,
at your option pursuant to the process set forth in Appendix B, and after
You transmit to IBM the electronic assembly record, IBM will credit any
amounts You owe IBM for an amount announced by IBM from time-to-time for
each Returned Part actually received by IBM.
(c) Marketing Funds and Promotional Offerings. Additionally, after You transmit
to IBM the electronic assembly record, any marketing funds and promotional
offerings (e.g., ProPlan and HQ Funds) allocated to You shall be adjusted,
if necessary, to reflect the purchase by You of the Approved Product rather
than the purchase of the Base System Unit and Approved Components. For
example, if the marketing funds associated with the Approved Product are
less than the sum of the funds allocated to You for the Base System Unit
and the Approved Components purchased by You to assemble the Approved
Product, IBM will reduce the amount of the marketing funds allocated to You
to equal the amount that would have been allocated to You for purchase of
the Approved Product. Conversely, if the marketing funds associated with
the Approved Product are greater than the sum of the marketing funds
allocated to You for the Base System Unit and the Approved Components
purchased by You to assemble the Approved Product, IBM xxxx
Xxxx 14
allocate to You an additional amount of marketing funds equal to the
difference. For the purpose of determining the marketing funds and
promotional offerings associated with Approved Products You are authorized
to assemble under Appendix B, the marketing funds and promotional offerings
associated with the highest IBM standard machine type model inherent in the
Approved Product and with any Approved Components above those required to
assemble the inherent model will be added together.
14. RETURNS. All Base System Units, Approved Components and Removed Parts that
You return to IBM must be new and unused, and by returning such items to
IBM, You represent and warrant that they are new and unused. Approved
Products assembled by You may not be returned assembled. In order to return
an Approved Product, You must disassemble it into the original Base System
Unit and Approved Components and transmit to IBM an electronic disassembly
record in the format prescribed by IBM in Appendix A. Further, all returns
of Base System Units and Approved Components are subject to the then-
current inventory adjustment terms and conditions of the IBM Business
Partner Agreement, including, but not limited to, returns caps and handling
fees.
15. WARRANTY.
(a) The IBM Statement of Limited Warranty included in the Approved Product's
designated ship group applies as provided in Appendices A and B to an
Approved Product assembled and tested by You and purchased by an End User
provided that such Approved Product was assembled and tested by You in full
and complete compliance with this Agreement and is otherwise free from
defects in your workmanship under normal use and operation during the
limited warranty period specified for such product in the applicable IBM
Statement of Limited Warranty. You shall bear exclusive responsibility for
all End User warranty claims relating to such Approved Products arising
from or connected with your failure to comply with the terms of this
Agreement, your inclusion in an Approved Product of additional components
that do not comply with Subsection 10(c)(6)(i) and (ii) above, and/or
your defective workmanship. TO THE MAXIMUM EXTENT ALLOWED BY APPLICABLE
LAW, IBM EXPRESSLY DISCLAIMS ALL IMPLIED WARRANTIES FLOWING TO YOU OR TO
ANY END USERS RELATING TO ANY APPROVED PRODUCT, INCLUDING WITHOUT
LIMITATION, WARRANTIES AND CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE. IN ADDITION, TO THE MAXIMUM EXTENT ALLOWED BY
APPLICABLE LAW, IBM EXPRESSLY DISCLAIMS ALL EXPRESS WARRANTIES AND
CONDITIONS FLOWING TO YOU OR TO ANY END USERS WITH RESPECT TO ANY APPROVED
PRODUCT THAT IS NOT ASSEMBLED AND TESTED BY YOU IN FULL AND COMPLETE
COMPLIANCE WITH THIS AGREEMENT, THAT INCLUDES ADDITIONAL COMPONENTS THAT DO
NOT COMPLY WITH SUBSECTION 10(c)(6)(i) AND (ii) ABOVE, OR THAT IS NOT FREE
FROM DEFECTS IN YOUR WORKMANSHIP.
Page 15
(b) ALL SOFTWARE IMAGES, TEST SOFTWARE AND OTHER SOFTWARE PROVIDED TO YOU UNDER
THE AUTHORIZED ASSEMBLER PROGRAM ARE PROVIDED "AS IS," WITHOUT WARRANTY OF
ANY KIND. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IBM EXPRESSLY
DISCLAIMS ALL WARRANTIES AND CONDITIONS FLOWING TO YOU OR TO ANY END USER,
WHETHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION, WARRANTIES AND
CONDITIONS OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE WITH
RESPECT TO SUCH SOFTWARE IMAGES, TEST SOFTWARE AND OTHER SOFTWARE.
16. INDEMNIFICATION. You will defend, indemnify and hold harmless, IBM, its
Subsidiaries, employees, and directors from all fines, claims, and expenses
of any kind (including reasonable attorneys' fees and expenses) arising
from or connected with (a) allegations that You have violated or otherwise
failed to comply with any applicable law, ordinance, rule or regulation in
the performance of your obligations under this Agreement, (b) any breach,
default, or non-compliance by You related to your representations,
warranties or obligations under this Agreement, (c) alteration or
modification by You of any Software Image, Test Software or Other Software,
whether IBM approved of such alteration or modification or not, (d)
unauthorized use, reproduction or distribution of Software Images, Test
Software and Other Software by You or your employees or agents, and (e)
modification by You of any assembly or test process, agency compliance
requirement, or other specifications contained in Appendix A or Appendix B,
as appropriate.
17. LIMITATION OF LIABILITY. Circumstances may arise where, because of a
default or other liability on IBM's part, You are entitled to recover
damages from IBM. In each such instance, regardless of the basis on which
damages can be claimed, IBM shall be responsible only for: (a) bodily
injury (including death) and damage to real property and tangible personal
property caused by an Approved Product assembled in accordance with the
terms of this Agreement; and (b) the amount of any other actual loss or
damage up to the greater of $100,000 or the amount You paid for the for the
Approved Product that is the subject of the claim. Under no circumstances
will IBM be liable for any of the following: (i) third-party claims against
You for losses or damages (other than those under the first item above);
(ii) loss of or damage to your records or data; or (iii) economic
consequential damages (including lost profits or savings) or incidental
damages, even if IBM was informed of their possibility.
18. MODIFICATIONS AND AMENDMENTS. Except as otherwise provided in this Section
18, this Agreement can only be modified or amended in a writing signed by
both parties. In order to maintain flexibility in our relationships, IBM
may modify, add or delete terms or conditions of this Agreement (excluding
its exhibits, appendices or attachments, which may be modified as provided
below) by providing You thirty (30) days advance written notice. You agree
to comply with all such
Page 16
modifications, additions, or deletions to this Agreement if you continue to
assemble Approved Products more than thirty (30) days after the date IBM
gives such notice. In any event, in order to make changes that IBM deems
timely and necessary in the Authorized Assembler Program, IBM may modify,
add or delete any exhibits, appendices or other attachments to this
Agreement by notifying You in writing or electronically that such exhibit,
appendix or attachment has been modified, added or deleted and the
effective date thereof. In order to improve communication of such changes,
IBM may announce modifications, additions and deletions to exhibits,
appendices or other attachments to this Agreement on the Internet, or by
other electronic or facsimile transmission.
19. CONTRACT PERIOD AND RENEWAL. This Agreement shall become effective as of
the date first above written when it is executed by You and accepted by IBM
and shall automatically expire as of December 31, 1997, unless sooner
terminated. This Agreement can be renewed for successive one-year terms by
mutual agreement of the parties. Neither party is obligated to renew, and
no cause need be given for non-renewal.
20. TERMINATION AND END OF AGREEMENT.
(a) Either party may terminate this Agreement with or without cause upon thirty
(30) days prior written notice to the other party.
(b) In addition, IBM may consider certain actions so serious a threat to the
integrity of the Authorized Assembler Program and/or IBM's goodwill as to
warrant immediate termination. Accordingly, IBM may terminate this
Agreement immediately upon written notice to You if You repudiate this
Agreement, if You materially breach its terms and/or conditions, or if You
engage in a course of conduct that has, in IBM's sole judgment, injured
IBM's reputation or the reputation of IBM's products.
(c) In the event that your IBM Business Partner Agreement is terminated for any
reason or otherwise expires, or in the event that You are no longer
eligible to purchase IBM personal computer products directly from IBM, this
Agreement shall be terminated concurrently with no separate notice
required.
(d) In the event that notice of termination of this Agreement is given for any
reason or for no reason, IBM shall be entitled to reject all or any orders
received from You after notice and prior to the effective date of
termination, or IBM may elect to limit shipments to You during such period.
Further, as of the date notice of termination is given, IBM in its sole
discretion may discontinue extension of any credit terms previously made
available to You.
(e) This Agreement shall end on the effective date of termination as provided
in this Section 20 or when the contract period expires without renewal as
provided in Section 19. When this Agreement ends, your right to receive any
credits or
Page 17
adjustments for assembling Approved Products from your remaining inventory
immediately ceases.
(f) At the end of this Agreement, You agree to sell to IBM, at the price You
paid IBM less any credits issued to You, all new and unused Approved
Components that IBM offers for use only in the Authorized Assembler Program
(such as certain features and options or the operating system publication
packs, all of which are identified in Appendix A and the IBM ordering
system as available only to Authorized Assemblers). If any such Approved
Components are used, You agree to contact IBM for instructions on
disposition. Your obligations in this subsection shall not apply to
approved Components that are generally available in the same unit size to
Authorized Assemblers and other resellers alike but are merely in different
packaging.
(g) All obligations and duties of the parties, including, but not limited to,
your representations and warranties hereunder, that by their nature survive
the expiration or termination of this Agreement shall remain in effect
after expiration or termination and shall bind the parties and their legal
representatives, successors and assigns.
21. GENERAL TERMS.
(a) Neither party may assign, delegate, or otherwise transfer its rights or
obligations under this Agreement without the prior written approval of the
other party which may be withheld in that party's sole discretion. Any
attempted assignment, delegation or transfer without such approval shall be
void.
(b) Each party is free to enter into similar agreements with others, to market
competitive products and to conduct its business in whatever way it
chooses, provided that there is no conflict with this Agreement.
(c) You agree to keep the terms and conditions of this Agreement confidential
and not to disclose the terms or conditions to any third party without the
prior written approval of IBM.
(d) You are an independent contractor of IBM, and You are not IBM's employee or
franchisee. Neither of us is a legal representative or agent of the other.
Neither of us is legally a partner or joint venturer of the other (for
example, neither of us is responsible for the debts incurred by the other).
(e) IBM may periodically review your performance under this Agreement. You
agree to provide IBM with relevant records upon request and otherwise
cooperate with IBM's review. IBM has the right to reproduce the records,
retain the copies, and audit your compliance with this Agreement on your
premises during normal business hours. IBM may use an independent auditor
for this purpose.
Page 18
(f) You will provide IBM with sufficient, free, and safe access to your
facilities at mutually-convenient times. You agree to allow one or more
IBM representatives to be on your premises at all times while You are
performing under the terms of this Agreement to inspect your activities and
monitor compliance with the terms of this Agreement. You will assign a
management level employee to interact with the IBM representative(s) and to
coordinate your activities in response to requirements identified by the
IBM representative(s). If You become aware of any unsafe conditions or
hazardous materials to which IBM personnel may be exposed at any of your
facilities, You agree to notify IBM immediately.
(g) Failure by either of the parties to insist upon strict performance or to
exercise a right when entitled does not prevent that party from doing so at
a later time, either in relation to that default or any subsequent one. All
waivers must be in writing and signed by an authorized representative of
the waiving party.
(h) If either party requires the exchange of confidential information, it will
be made under a signed confidential disclosure agreement, the terms of
which will be incorporated by reference herein.
(i) The laws of the State of New York, excluding its conflict of laws
principles, shall govern this Agreement. EACH PARTY EXPRESSLY WAIVES ANY
RIGHT IT MAY HAVE TO A JURY TRIAL. IN ANY DISPUTE ARISING OUT OF OR IN
CONNECTION WITH THIS AGREEMENT, YOU AGREE TO BRING ANY ACTION OR PROCEEDING
OVER SUCH DISPUTE SOLELY IN THE UNITED STATES DISTRICT COURT LOCATED IN
WESTCHESTER COUNTY, NEW YORK (OR, IF SUBJECT MATTER JURISDICTION IN THAT
COURT IS NOT AVAILABLE, IN ANY STATE COURT LOCATED WITHIN THE COUNTY OF
WESTCHESTER, NEW YORK).
(j) If the event of any inconsistency in the various documents which govern the
parties' performance under this Agreement, the order of precedence shall
be:
(i) this Agreement, excluding its exhibits, appendices and other
attachments (unless an exhibit, appendix or attachment specifically
supersedes a term of this Agreement, in which case the terms of such
exhibit, appendix or attachment shall govern);
(ii) the Installation Agreement attached as Exhibit 1;
(iii) Appendices A and B, as appropriate; and
(iv) any other exhibits, appendices or other attachments in the order in
which they are attached unless a subsequent exhibit, appendix, or
other attachment specifically supersedes a term of a prior exhibit,
appendix, or other attachment.
Page 19
(k) The parties agree that:
(i) an identification code (called a "USERID") contained in an electronic
document is legally sufficient to verify the sender's identity and
the document's authenticity;
(ii) an electronic document that contains a USERID is a signed writing;
and
(iii) an electronic document, or any computer printout of it, is an
original when maintained in the normal course of business.
(l) If any section or subsection of this Agreement is found by competent
judicial authority to be invalid, illegal or unenforceable in any respect,
the validity, legality and enforceability of any such section or subsection
in every other respect and the remainder of this Agreement shall continue
in full force and effect.
(m) All of your rights and all of our obligations under this Agreement are only
valid in the United States and Puerto Rico.
Page 20
IN WITNESS WHEREOF, the parties execute this Agreement for Participation in the
IBM Business Partner - PC, Authorized Assemble Program effective as of the
date first above written.
Received by IBM /s/ XXXX 16 JAN 97
---------------------- ----------------------
Office No. Date
Agreed and Accepted By:
International Business Corporation CompuCom Systems, Inc.
By: /s/ X X XXXXXXX By: /s/ XXX XXXXX
-------------------------------- -------------------------------
Authorized Signature Authorized Signature
Xxxxxx X Xxxxxxx Xxx Xxxxx
-------------------------------- -------------------------------
Name (Print or Type) Name (Print or Type)
Agreed and Accepted By
Authorized Subsidiary:
Name of Authorized Subsidiary:
-----------------------------------
By:
-----------------------------------
Authorized Signature
-----------------------------------
Name (Print or Type)
Address of Authorized Subsidiary:
----------------------------------------
----------------------------------------
Authorized Subsidiary Approved:
International Business Machines Corporation Effective Date:
-----------------
By:
--------------------------------
Authorized Signature
--------------------------------
Name (Print or Type)
Page 21
IBM Business Partner -- PC, Authorized Assembler Program
Appendix Cross Reference Table
Document
Number Document Title Appendix
IAA000 Current Document Listing X/X
XXX000 XXX Xxxxxxxxxxxx X,X
IAA002 Drive Handling Requirements A, B
IAA005 Inspection Procedure A,B
IAA007 Quality Reporting A,B
IAA008 Download Software Information A, B
IAA009 System Unit Upgrade, 3x3(300) A
IAA010 System Unit Upgrade, 5x5(300) A
IAA012 External Hardfile Replication Process A, B
IAA014 Quality Management X,X
XXX0x0 Quarterly Audit Checklist A
IAA016 Site Review Checklist A
IAA017 Test/ Configuration Requirements A, B
IAA018 General Process Requirements A, B
IAA019 System Unit Upgrade, (Servers) A
IAA020 System Unit Upgrade, (6887, 5x5) A
IAA023 Miscellaneous Parts Fulfillment Process A, B
IAA024 Short Ship Parts Replacement Process A, B
IAA025 Component Parts Fulfillment Process A, B
IAA026 Software Use Criteria A,B
IAA027 Product Safety A,B
IAA028 Federal Communications Commission (EMC) A, B
IAA029 EDI 140 Product Registration A, B
IAA030 IAA Reconciliation Matrix/ Xxxx of Mater A, B
IAA031 Error Code LIsting A,B
IAA032 IBM Barcode Identification A, B
IAA033 System Unit Upgrade, (6577) A
IAA035 Authorized Assembly Download Process A, B
IAA036 Custom Solution Process B
IAA037 Warranty Terms A,B
Note: The documents listed above can be found on the program web page which
is userid/password controlled. The URL for accessing the web page is:
xxxx://xxx.xxxxxxx.xxx.xxx/xxxx/xxxx
EXHIBIT 1
SOFTWARE INSTALLATION AGREEMENT
THIS SOFTWARE INSTALLATION AGREEMENT, including its attachments, ("Agreement")
dated the 16 day of January, 1997 is entered into by and between CompuCom
Systems, Inc.("Installer"), a Delaware corporation having an office for the
transaction of business at, 00000 Xxxxx Xxxxxxx Xxxxxxxxxx; Xxxxxx, Xxxxx 00000
and International Business Machines Corporation ("IBM"), a New York corporation
having an office for the transaction of business at 0000 Xxxxxxxxxx Xxxx,
Xxxxxxxx Xxxxxxxx Xxxx, Xxxxx Xxxxxxxx 00000. Capitalized terms not otherwise
defined herein shall have the meanings ascribed to such terms in the Agreement
for Participation in the IBM Business Partner - PC, Authorized Assembler Program
entered into by and between Installer and IBM dated January 16, 1997 ("Assembly
Agreement"), the terms of which are hereby incorporated by reference.
WHEREAS, Installer has been authorized by IBM pursuant to the Assembly Agreement
to assemble and test IBM personal computer products for sale to Resellers and
End Users as provided therein; and
WHEREAS, in connection with the assembly and testing of IBM personal computer
products under the IBM Business Partner-PC, Authorized Assembler Program
("Authorized Assembler Program"), Installer desires to be able to Preload on
Approved Products certain Software Images containing programs and other code
developed and owned by Microsoft Corporation ("MS") and licensed to IBM; and
WHEREAS, in order for IBM to authorize Installer to Preload such Software Images
under the terms of the applicable license agreement ("MS License") between IBM
and MS, Installer agrees to comply with all of the terms and conditions of this
Agreement.
NOW, THEREFORE, in exchange for good and valuable consideration, the receipt and
sufficiency of which are hereby acknowledged, the parties agree as follows:
1. AGREEMENT. With respect to Preloading of Software Images governed by this
Agreement, the terms and conditions of this Agreement are in addition to, and
not in lieu of, the terms and conditions of the Assembly Agreement. Except as
expressly provided herein, this Agreement, including any attachments, and the
Assembly Agreement constitute the complete and exclusive statement of the
agreement and understanding between the parties regarding Preloading by
Installer under the Authorized Assembler Program of certain Software Images
containing programs and other code developed and owned by MS. This Agreement
supersedes all other proposals, prior agreements (except for the Assembly
Agreement), and other communications, oral or written, between the parties
regarding the subject matter hereof. Except as expressly provided herein, this
Agreement does not modify or alter the Assembly Agreement in effect between the
parties. All other terms and conditions of the Assembly Agreement not expressly
modified by this Agreement will continue to apply to Installer while assembling
and testing Approved Products, including Preloading Software Images, under the
Authorized Assembler Program.
2. AUTHORIZATION.
(a) Installer. Initially, this Agreement shall only apply to Windows 95
and NT Workstation 4.0, including any and all revisions, enhancements,
supplements or releases thereto (collectively, "MS Software Images"). If
required by MS, IBM may include additional Software Images in the term "MS
Software Images" under this Agreement by notifying Installer in writing.
Provided that Installer complies fully with the terms of this Agreement and
the Assembly Agreement (the terms of which are hereby incorporated by
reference), pursuant to the terms of the MS License, IBM hereby authorizes
Installer at Approved Locations to Preload MS Software Images on Approved
Products bearing the IBM logo. Other Software Images developed and owned by
MS which are not governed by this Agreement but are included in the
Authorized Assembler Program may be Preloaded by Installer as otherwise
permitted in the Assembly Agreement.
(b) Installer's Authorized Subsidiaries. With prior written approval from
IBM, which approval may be withheld in IBM's sole discretion, Installer may
authorize its Subsidiaries that are authorized to assemble and test
Approved Products pursuant to the Assembly Agreement to Preload MS Software
Images at Approved Locations in accordance with the terms of this Agreement
provided that Installer hereby unconditionally guarantees each of its
authorized Subsidiaries' full and complete compliance with the terms of
this Agreement. Pursuant to this guarantee, IBM shall not be required to
make demand upon Installer's Subsidiary as a condition to making demand
upon Installer. Each authorized Subsidiary shall co-execute this Agreement,
and the term "Installer" as used herein shall include all authorized
Subsidiaries who co-execute this Agreement and are approved in writing by
IBM to Preload MS Software Images as provided herein.
(c) MS Approval. Notwithstanding anything herein to the contrary, any
Installer, Subsidiary of Installer, or installation location is subject to
approval in writing by MS as provided in the MS License. If MS fails to
approve any Installer, Subsidiary of Installer, or installation location,
this Agreement shall be null and void as to such entity or location.
Installer shall provide IBM with the addresses of its headquarters and the
desired installation location(s) for which approval is requested at least
forty-five (45) days in advance of the anticipated first installation date
for such location.
3. INSTALLER'S RESPONSIBILITIES. Installer represents, warrants and agrees that
it shall:
(a) Comply fully and completely with all of the terms of the Assembly
Agreement, including, but not limited to, the terms of Section 8 regarding
Preloading Software Images.
(b) Comply fully and completely with the obligations of the MS License
including, but not limited to, those specifically set forth in the First
Annex of Additional Provisions hereto (which terms are hereby incorporated
by reference) in the same manner and to the same extent that IBM is
required to comply with such obligations; provided, however,
that, except as expressly provided in this Agreement or Exhibit 1, this
provision is not a sublicense or assignment of any rights of IBM under the
MS License, and Installer shall not have any right or license to use,
reproduce or distribute any MS Software Images. Copies of the MS License
are available for review upon request.
(c) Implement one of the following processes, which are described more
fully in Appendices A and B of the Assembly Agreement (which Appendices are
hereby incorporated by reference), at each Approved Location to ensure
protection of the MS Software Image during the installation process:
(I) Process One. An IBM or IBM contractor employee shall be located
-----------
at the Installer's site to monitor the Preload process and to ensure
that the master media containing the MS Software Image used for the
Preload process is retained in a secure area accessible only to such
employee when not in use by the Installer; or
(II) Process Two. The master media containing the MS Software Image
-----------
used for the Preload process shall be located on a server system which
will be accessible only by an IBM or IBM contractor employee,
replication of the MS Software Image shall be performed only under the
authorization of IBM, and all copies shall be monitored and tracked to
an individual Approved Product serial number.
If process one is selected, Installer shall take all necessary steps to
ensure that only IBM and those authorized by IBM in writing shall have
access to such secured area including, without limitation, installing locks
to which only IBM has keys and ensuring no other possible access through
ceilings, walls, or floors. If process two is selected, Installer shall
designate a dedicated server system with phone line for such purpose, and
access to such server shall be limited to IBM and those authorized by IBM
in writing through passwords, keyboard lock, and a locked cover over all
diskette drives and CD drives. Further, Installer shall take all necessary
steps to protect such server system from unauthorized use. Installer's
compliance with such processes will be subject to audit by IBM as provided
in the Assembly Agreement.
(d) Immediately stop Preloading of all MS Software Images upon notice from
IBM or MS of the suspension, termination, or expiration of this Agreement,
the MS License, or the Assembly Agreement.
(e) Record, track and report to IBM (for consolidated reporting to MS) in
the manner and at intervals required by IBM under the Authorized Assembler
Program the number of units, the model number (if applicable), the
configuration, the name of the MS Software Image Preloaded, and the unique
serial number of the Approved Products distributed with an MS Software
Image. In addition, Installer shall report to IBM (for consolidated
reporting to MS), whether each Approved Product distributed with an MS
Software Image has been completely assembled and tested for End User use by
the Installer.
(f) Maintain a separate inventory of all publications, license agreements,
certificates of authenticity, and other documentation related to the MS
Software Images that are provided by IBM for inclusion with Approved
Products.
(g) Distribute Approved Products with Preloaded MS Software Images only to
IBM or IBM Subsidiaries, or to End Users and Resellers to the extent
permitted in the Assembly Agreement.
4. ADDITIONAL AGREEMENTS BY INSTALLER. Installer further represents, warrants
and agrees:
(a) To notify IBM immediately in writing of any suspected or actual non-
compliance with the terms of this Agreement or the MS License by Installer,
its employees or agents.
(b) To pay MS' and IBM's attorneys' fees if MS or IBM employ attorneys to
enforce any rights arising out of this Agreement.
(c) That, if the Installer installs any image other than a Software Image
provided by IBM on an Approved Product, the installation of such image is
not authorized by this Agreement, and Installer is solely responsible for
payment of any royalties for, and support of, that image.
5. THIRD PARTY BENEFICIARY. MS is an intended third party beneficiary of this
Agreement with full rights to enforce the terms of this Agreement on its own
behalf.
6. INDEMNIFICATION. Installer agrees to indemnify and hold harmless IBM, its
Subsidiaries, employees, and directors, from all fines, claims and expenses of
any kind (including attorneys' fees and expenses) incurred by IBM or MS arising
from or connected with (a) any breach, default or non-compliance by Installer of
its representations, warranties or obligations under this Agreement, (b)
alteration or modification by Installer of any MS Software Image, whether IBM
approved of such alteration or modification or not, (c) installation of any
image other than a Software Image provided by IBM on an Approved Product, and
(d) any unauthorized use, reproduction or distribution of MS Software Images or
related documentation by Installer, or its employees or agents, whether or not
authorized by Installer.
7. MODIFICATION AND AMENDMENT. Notwithstanding any language in the Assembly
Agreement to the contrary, except as otherwise provided in this Section 7, this
Agreement may only be modified or amended in a writing signed by an authorized
representative of both parties. IBM may modify, add or delete terms or
conditions of this Agreement in response to a modification or amendment of the
MS License by providing Installer thirty (30) days advance written notice.
Installer agrees to comply with such modifications, additions, or deletions to
this Agreement if it continues to Preload MS Software Images on Approved
Products more than thirty (30) days after the date IBM gives such notice. No
waiver by IBM of any provision shall be effective unless it is in writing and
signed by an authorized representative of IBM.
8. TERM AND TERMINATION. This Agreement shall be effective as of the date first
written above and shall continue in effect until the earlier of: (a) the
expiration or termination of the MS License; (b) the expiration or termination
of the Assembly Agreement; or (c) termination of this Agreement as specified
below:
(I) IBM may terminate this Agreement, with cause, immediately upon
written notice to Installer.
(II) MS may terminate this Agreement immediately upon written notice to
Installer and IBM in the event that MS leams of any unauthorized use,
reproduction or distribution of MS intellectual property.
(III) Either party may terminate this Agreement without cause upon thirty
(30) days prior written notice to the other party.
All obligations and duties of the parties, including, but not limited to,
Installer's representations, warranties and indemnification obligations
hereunder, that by their nature survive the expiration or termination of this
Agreement shall remain in effect after expiration or termination and shall bind
the parties and their legal representatives, successors and assigns.
9. GENERAL TERMS.
(a) No right, interest, privilege, or obligation of this Agreement shall
be assigned or delegated by Installer. Any attempted assignment, delegation
or transfer will be null and void.
(b) Installer agrees to keep the terms and conditions of this Agreement
confidential, including, but not limited to, the terms of the MS License
referenced herein, and not to disclose the terms or conditions to any third
party without the prior written approval of
IBM.
(c) Installer is an independent contractor of IBM and not an IBM employee
or franchisee. Neither of the parties is a legal representative or agent of
the other. Neither of the parties is legally a partner or joint venturer of
the other.
(d) Failure by either party to insist upon strict performance or to
exercise a right when entitled does not prevent that party from doing so at
a later time, either in relation to that default or any subsequent one.
(e) The laws of the State of New York, excluding its conflict of laws
principles, shall govern this Agreement. EACH PARTY EXPRESSLY WAIVES ANY
RIGHT IT MAY HAVE TO A JURY TRIAL. IN ANY DISPUTE ARISING OUT OF OR IN
CONNECTION WITH THIS AGREEMENT, YOU AGREE TO BRING ANY ACTION OR
PROCEEDING OVER SUCH DISPUTE SOLELY IN THE UNITED STATES DISTRICT COURT
LOCATED IN WESTCHESTER COUNTY, NEW YORK (OR, IF SUBJECT MATTER JURISDICTION
IN THAT COURT IS NOT AVAILABLE, IN
ANY STATE COURT LOCATED WITHIN THE COUNTY OF WESTCHESTER, NEW YORK).
(f) If any provision of this Agreement is held to be illegal, invalid, or
unenforceable, the legality, validity and enforceability of the remaining
provisions shall not be affected or impaired.
(g) All signed copies of this Agreement, and any copy of an original
signed Agreement made by reliable means (e.g., photocopy or facsimile),
shall be considered an original.
(h) All of Installer's rights and IBM's obligations under this Agreement
are only valid in the United States and Puerto Rico.
IN WITNESS WHEREOF, the parties have caused this Software Installation
Agreement to be signed by their respective duly authorized representatives
effective as of the date first above written.
Accepted and Agreed By:
International Business Machines CompuCom Systems, Inc.
Corporation
By: /s/ X X XXXXXXX By: /s/ XXX XXXXX
------------------------------- -------------------------------
Authorized Signature Authorized Signature
XXXXXX X XXXXXXX, DIR. XXX XXXXX, VP PRODUCT SERVICES
------------------------------------ ------------------------------------
Print Name and Title Print Name and Title
Agreed and Accepted By Authorized Subsidiary
Authorized Subsidiary: Approval
International Busness Machines
Corporation
------------------------------------
By: By:
------------------------------- -------------------------------
Authorized Signature Authorized Signature
------------------------------- -------------------------------
Print Name and Title Print Name and Title
FIRST ANNEX OF ADDITIONAL PROVISIONS:
MS LICENSE OBLIGATIONS IMPOSED ON INSTALLER
1. INSTALLATION OBLIGATIONS. Installer represents, warrants and agrees:
(a) to install no more than one (1) copy of the MS Software Image on each
Approved Product system hard disk ("Preinstalled MS Software");
(b) to distribute directly or indirectly (e.g., through Resellers) (in
object code form) to End Users no more than one (1) copy each of the MS
Software Image and related documentation with each Approved Product system to
use, execute, display and reproduce for operational and archival purposes
under the terms of the applicable End User license agreement(s) ("XXXX")
provided as part of the MS Software Image documentation; provided, however,
that if IBM provides Installer with a recovery CD of the MS Software Image
("Recovery CD") or back-up copy of the MS Software Image on CD ("Back-up
Copy") in an Approved Product's ship group, Installer shall distribute one
copy of such Recovery CD or Back-up CD along with the Approved Product;
(c) to distribute MS Software Image(s) only with Approved Product(s) and
only inside the Approved Product package. In the event that IBM or Microsoft
notifies Installer that any MS Software Image is being distributed by
Installer outside the Approved Product package, Installer shall take
immediate corrective action. For each copy of the MS Software Image that is
distributed other than in an Approved Product after the date of such notice,
Installer agrees to indemnify IBM and its Subsidiaries for any additional
royalty obligation due to MS. Except as provided in the Agreement, Installer
shall not remove or modify the package contents of any MS Software Image or
documentation. Installer shall (i) contractually obligate (e.g., by contract,
invoice or other written instrument) all distributors, dealers and others in
its entire distribution channels to comply with the provisions of this
subsection 1(c); (ii) promptly discontinue distribution of MS Software
Image(s) to any such distributor, dealer or other in its distribution channel
which does not comply with the provisions of this subsection 1(c); and (iii)
cooperate with IBM in investigating instances of distribution of Product
which do not comply with the provisions of this subsection 1(c).
(d) that if Installer is authorized by IBM to distribute the MS Software
Image(s) on media other than installed on the Approved Product hard disk,
Installer shall distribute the MS Software Image(s) on separate media (e.g.,
separate diskettes, CD-ROM disc, etc.) from other software, except for
distribution of a Recovery CD approved by MS.
(e) that Installer shall not reverse engineer (i.e., decompile or
disassemble) any MS Software Image provided by IBM to Installer under the
Agreement.
(f) that Installer shall distribute any supplements or fixes for the MS
Software Image that are provided by IBM in accordance with the terms of the
Agreement and any additional guidelines provided by IBM.
PAGE 1 Installer Please Initial: /s/ JS
2. ADDITIONAL RESTRICTIONS. Installer represents, warrants and agrees to comply
with the following additional provisions:
(a) Notwithstanding anything to the contrary that may be contained in the
Agreement or the Assembly Agreement, the following shall apply to any MS
Software Image which is governed by the Agreement:
(i) Installer is not licensed to, and agrees that it will not,
modify, in any way, or delete any aspect of the MS Software Image
(including, without limitation, any features, shortcuts, icons, "wizards",
folders (including sub-folders) or programs of the MS Software Image) as
delivered by IBM.
(ii) If Installer enters registration information on behalf of End
Users in the boxes provided for the on-screen End User registration process
for the MS Software Image, Installer shall not enter its own name or make
any other false or fictional registrations. Installer shall not (A) relieve
End Users of their obligations to enter Certificate of Authenticity ("COA")
registration numbers in the on-screen End User registration process and to
reply to on-screen XXXX inquiries or (B) insert COA registration numbers or
reply to XXXX inquiries for or on behalf of End Users.
(iii) If and only if Installer distributes the MS Software Image
solely as Preinstalled MS Software (i.e., without a Recovery CD) with any
Approved Product, then if provided by IBM, Installer shall also preinstall
the Microsoft Create System Disk Tool together with the back-up diskette
images ("CAB" files) provided by IBM on the hard disk drive of such
Approved Product to enable the End User to make a back-up copy of the MS
Software Image according to the terms of the applicable XXXX. Diskette
images may only be used with the Microsoft Create System Disk Tool.
Installer may not distribute, use, or authorize the use of the tangible
forms of the Microsoft Create System Disk Tool or diskette images except as
provided in this additional provision.
(iv) Installer shall distribute only the XXXX provided by IBM for the
MS Software Image.
(v) Installer may distribute the MS Software Image only with
Approved Products which are marketed and distributed under IBM's or IBM
Subsidiaries' brand names and trademarks.
(vi) With respect to any multiple language versions of the MS
Software Image that may be provided to Installer by IBM:
(A) Installer may install such MS Software Image with each Approved
Product for which such multiple language version of the MS Software
Image is designated or approved in writing by IBM provided that
Installer complies with the following restrictions:
PAGE 2 Installer Please Initial: /s/ JS
(1) Installer may distribute such multiple language versions of
the MS Software Image only in the form of Preinstalled MS Software.
Installer may distribute only one backup copy of the MS Software Image
in only one language version for use on each such Approved Product;
(2) Installer shall use the MS set-up utility included in the MS
Software Image deliverables which allows the End User to choose one,
and only one, language version of the MS Software Image for the
Approved Product;
(3) Installer shall follow all guidelines and procedures set
forth in the MS Software Image deliverables regarding the
installation, set-up, and initialization of multiple language versions
of the MS Software Image; and
(4) Installer shall use commercially reasonable efforts to
indicate to End Users, including in multiple language version
advertising and on Approved Products packaging, that End Users shall
have access to one language version only.
(B) Installer shall indemnify and defend IBM, MS and their respective
Subsidiaries from and against all damages, costs, and attorney's fees
arising from claims or demands awarded against the indemnified party (or
settlements to which Installer consents) based on any advertisements or
other representations made by Installer that the End User is entitled to
more than one language version of the MS Software Image or that any such
advertisements or other representations are otherwise false and/or
misleading with respect to the one-time language selection feature,
provided Installer is notified promptly in writing of the claim and has
sole control over its defense and settlement and IBM, MS and their
respective Subsidiaries provide reasonable assistance in the defense of the
same.
(C) Installer's report required under subsection 3(e) of the
Agreement shall separately indicate the number of Approved Products
distributed with each combination of language versions of MS Software
Image.
(vii) Installer is authorized under the Agreement to distribute the MS
Software Image only with and for use on Approved Products based on the Intel
x86, Pentium or compatible architecture. In addition, without the prior
written approval of IBM and the payment of any additional amounts required by
IBM, NT Workstation 4.0 may not be installed on Approved Products with more
than two (2) microprocessors.
(viii) Installer is authorized under the Agreement to install and
distribute only MS Software Images provided by IBM with the intended Approved
Product.
PAGE 3 Installer Please Initial: /s/ JS
Upon notification by IBM, Installer shall immediately discontinue
installation or distribution of any MS Software Image.
(b) Installer shall pre-install the MS Software Image as the "default"
operating system on each Approved Product distributed with the MS Software
Image (i.e., the MS Software Image will set up and execute unless the End
User configures the Approved Product otherwise). Installer shall preinstall
the MS Software Image solely in accordance with the installation instructions
set forth in Appendices A and B of the Assembly Agreement. Installer may use
the tangible forms of the programming code (tools and software) provided by
IBM solely to preinstall the MS Software Image in accordance with the
Assembly Agreement and for no other purpose. Installer shall not modify the
MS Software Image provided by IBM, nor delete or remove any features or
functionality.
(c) Except as otherwise provided by IBM, Installer may not (i) distribute
both Windows 95 and any other MS Software Image with the same Approved
Product or (ii) distribute both Windows NT Workstation and any other MS
Software Image with the same Approved Product.
(d) Installer must distribute related MS Software Image documentation with
each Approved Product distributed with an MS Software Image. A COA must be
affixed to or accompany each copy of the MS Software Image documentation, and
the COA serial number must be registered with the Approved Product during the
assembly process as provided in Appendices A and B.
3. INTELLECTUAL PROPERTY NOTICES. Installer will not remove any copyright,
trademark or patent notices that appear on the MS Software Image as delivered to
Installer.
4. OBLIGATIONS UPON TERMINATION.
(a) Except as otherwise provided in subsection 4(c) below, within five (5)
days termination or expiration of the Agreement for any reason, Installer
shall return to IBM all MS Software Image(s) master media and all MS Software
Image documentation which has not been shipped to End Users.
PAGE 4 Installer Please Initial: /s/ JS
(b) Termination of the Agreement as a result of Installer's default shall
result in accelerated payment of Installer's obligation to pay all sums
Installer is obligated to pay under the Agreement.
PAGE 5 Installer Please Initial: /s/ JS
(c)(i) Except as otherwise provided in this subsection 4(c), upon termination
or expiration of the Agreement for any reason, Installer's authority to
Preload MS Software Images shall immediately cease and Installer's authority
to distribute Approved Products preinstalled by Installer with an MS Software
Image shall end sixty (60) days after such termination or expiration of the
Agreement. For purposes of this subsection 4(c)(i), completion of
distribution requires the Approved Product to be in the possesion of an End
User within the 60-day period.
(ii) If the Agreement terminates or expires due to a reason other than a
default on the part of Installer thereunder or other than the termination or
expiration of the Assembly Agreement, Installer's authority to Preload MS
Software Images may continue as provided in this subsection 4(c)(ii). With
the prior written approval of IBM and in accordance with the MS License, IBM
may extend Installer's authority to Preload MS Software Images for a
specified quantity and type of MS Software lmages for a period of no more
than sixty (60) days; provided that Installer's distribution of all such
Preloaded Approved Products must be completed within sixty (60) days after
termination or expiration of the Agreement. For purposes of this subsection
4(c)(ii), completion of distribution requires the Approved Product to be in
the possesion of an End User within the 60-day period. Any such extension
will be subject to compliance with all other applicable terms of the
Agreement and the Assembly Agreement, and such terms shall survive
termination or expiration of the Agreement.
(iii) Notwithstanding the above, with prior written approval from IBM and in
accordance with the MS License, IBM may extend Installer's authority to
Preload MS Software Images on Approved Products and to distribute such
Approved Products longer than sixty (60) days to fulfill any contractual
commitments for large account/government bids existing as of the termination
or expiration of date of the Agreement provided that at least ten (10) days
before termination or expiration of this Agreement, Installer provides IBM
with a copy of those portions of any such contract or other written
verification required by MS to verify the existence of the contract, contract
term, large account or government agency/department name, address, and
quantities of MS Software Images remaining to be delivered as of the date of
termination or expiration of the Agreement. Any such extension will be
subject to compliance with all other applicable terms of the Agreement and
the Assembly Agreement, and such terms shall survive termination or
expiration of the Agreement.
PAGE 6 Installer Please Initial: /s/ JS
5. NONDISCLOSURE AGREEMENT. As provided in the Agreement, the terms and
conditions of the Agreement (including this attachment) are confidential, and
Installer shall not disclose the terms or conditions to any third party without
the prior written approval of IBM. All other exchanges of information between
the parties pursuant to the Agreement shall be deemed non-confidential unless
made pursuant to a separately signed written agreement for the exchange of
confidential information.
6. AUDITS AND INSPECTIONS.
(a) During the term of the Agreement, Installer agrees to keep all usual
and proper records and books of account and all usual and proper entries
relating to each MS Software Image sufficient to substantiate the number of
copies of MS Software Image installed and the number of Approved Products
distributed by Installer. Installer shall maintain on Installer's premises
such records, and all other records required to be kept by the Agreement, for
itself and for each Subsidiary of Installer that exercises rights under the
Agreement.
(b) In order to verify statements issued by Installer and Subsidiaries of
Installer and compliance with the terms of the Agreement by such entities,
IBM may cause (i) an audit to be made of Installer's and/or Installer's
Subsidiaries' books and records and/or (ii) an inspection to be made of
Installer's and/or Installer's Subsidiaries' facilities and procedures for
the sole purpose of determining the accuracy of Installer's or Installer's
Subsidiaries' reports. Any audit and/or inspection shall be conducted during
regular business hours at Installer's and/or Installer's Subsidiaries'
facilities, with at least forty-five (45) days prior written notice. Any
audit and/or inspection shall be conducted (other than on a contingent fee
basis) by an independent certified public accountant which is either (1)
jointly selected by Installer and IBM, or (2) has been agreed to by the
parties for any prior audit of any Installer/IBM license or agreement.
(c) Installer agrees to provide the audit or inspection team access to the
relevant Installer's and/or Installer's Subsidiaries' records and facilities
for the purpose of performing the audit.
(d) Prompt adjustment shall be made to compensate for any errors or
omissions disclosed by such audit. Any such audit shall be paid for by IBM
unless material discrepancies are disclosed. "Material" shall mean an
underaccounting of installed MS Software Images valued at more than $20,000.
If material discrepancies are
PAGE 7 Installer Please Initial: /s/ JS
disclosed, Installer agrees to pay IBM or MS for the costs associated with
the audit. Further, Installer agrees to indemnify IBM and its Subsidiaries
for any additional costs incurred by IBM as a result of any unauthorized
copies or copies which were not reported to IBM. In no event shall audits be
made more frequently than semiannually unless the immediately preceding audit
disclosed a material discrepancy.
(e) Any audit must be initiated within two (2) years after termination or
expiration of the Agreement.
7. EXPORT OR RE-EXPORT. Installer agrees that it will not export or re-export
an MS Software Image to any country to which such export is restricted by
Section 770 of the Export Administration Regulations, without prior written
consent, if required, of the Office of Export Administration of the U.S.
Department of Commerce, or such other governmental entity as may have
jurisdiction over such export. Restricted countries currently include, but are
not necessarily limited to, Cuba, the Federal Republic of Yugoslavia (Serbia and
Montenegro, U.N. Protected Areas and areas of Republic of Bosnia and Herzegovina
under the control of Bosnian Serb forces), Iran, Iraq, Libya, North Korea, and
Syria. Installer warrants and represents that neither the U.S.A. Bureau of
Export Administration nor any other federal agency has suspended, revoked or
denied Installer's export privileges.
PAGE 8 Installer Please Initial: /s/ JS
