INTERCONNECTION AGREEMENT
BETWEEN
BUSINESS TELECOM, INC. (BTI) COMMUNICATIONS
AND
BELLSOUTH
TABLE OF CONTENTS
Page
I. RECITALS AND PRINCIPLES..................................................................................1
II. SCOPE OF THE AGREEMENT...................................................................................2
III. DEFINITIONS..............................................................................................2
IV. ACCESS TO UNBUNDLED NETWORK ELEMENTS.....................................................................2
A. General Requirements................................................................................2
B. Interconnection with Network Elements...............................................................3
C. Order Processing....................................................................................5
D. Conversion of Exchange Service to Network Elements..................................................6
E. Service Quality.....................................................................................7
F. Network Information Exchange........................................................................8
G. Maintenance and Trouble Resolution..................................................................8
H. Billing for Network Elements.......................................................................10
I. Addition of Network Elements.......................................................................10
V. LOCAL TRAFFIC INTERCONNECTION ARRANGEMENTS..............................................................11
A. Types of Local Traffic to Be Exchanged.............................................................11
B. Designated Points of Interconnection...............................................................11
C. Facilities for Local Interconnection...............................................................13
D. Trunking and Signaling.............................................................................14
E. Network Management.................................................................................17
F. Local Number Assignment............................................................................18
G. Cross-Connection to Other Collocators..............................................................18
VI. LOCAL TRAFFIC EXCHANGE..................................................................................19
A. Exchange of Traffic................................................................................19
B. Compensation.......................................................................................19
C. Transit Traffic....................................................................................19
VII. MEET-POINT BILLING ARRANGEMENTS.........................................................................19
A. Applicability of OBF Guidelines....................................................................20
B. Meet-Point Interconnection.........................................................................20
C. Tariffs............................................................................................21
D. Billing and Data exchange..........................................................................21
E. Toll Free IXC Traffic..............................................................................23
F. MPB Billing Percentages............................................................................23
G. Special Arrangements...............................................................................23
VIII. TOLL TRAFFIC INTERCONNECTION............................................................................24
IX. NUMBER RESOURCE ARRANGEMENTS............................................................................24
X. ACCESS TO POLES, DUCTS, CONDUIT AND RIGHTS OF WAY.......................................................25
XI. ANCILLARY SERVICES AND PLATFORM ARRANGEMENTS............................................................26
A. 800 Traffic........................................................................................26
B. 911/E-911..........................................................................................26
C. Provision of Operator Services.....................................................................28
D. Transfer of Service Announcements..................................................................28
E. Coordinated Repair Calls...........................................................................28
F. Busy Line Verification and Interrupt...............................................................29
G. Directory Assistance (DA)..........................................................................29
H. Directory Listings and Directory Distribution......................................................30
I. Access to Signaling and Signaling Databases........................................................30
XII. TELEPHONE NUMBER PORTABILITY ARRANGEMENTS...............................................................31
XIII. DISCONNECTION OF CUSTOMERS..............................................................................33
XIV. RESALE OF BELLSOUTH LOCAL EXCHANGE SERVICES.............................................................34
XV. RESPONSIBILITIES OF THE PARTIES.........................................................................34
XVI. NETWORK DESIGN AND MANAGEMENT...........................................................................36
XVII. TERM....................................................................................................36
XVIII. IMPLEMENTATION OF AGREEMENT.............................................................................37
XIX. UNIVERSAL SERVICE.......................................................................................37
XX. FORCE MAJEURE...........................................................................................37
XXI. LIABILITY AND INDEMNIFICATION...........................................................................38
XXII. DEFAULT.................................................................................................40
XXIII. NONDISCLOSURE...........................................................................................40
XXIV. ARBITRATION.............................................................................................41
XXV. WAIVERS.................................................................................................42
XXVI. GOVERNING LAW...........................................................................................42
XXVII. ARM'S LENGTH NEGOTIATIONS...............................................................................42
XXIII. NOTICES.................................................................................................42
XXIX. ENTIRE AGREEMENT........................................................................................43
XXX. COUNTERPARTS............................................................................................43
ii
ATTACHMENT A (Operating Subsidiaries of BTI, Inc.)
ATTACHMENT B (Definitions)
ATTACHMENT C-1 (Collocation Rates)
ATTACHMENT C-2 (Unbundled Exchange Access Loops)
ATTACHMENT C-3 (Loop Channelization)
ATTACHMENT C-4 (Unbundled Exchange Ports)
ATTACHMENT C-5 (Signaling Rates)
ATTACHMENT C-6 (LIDB Storage)
ATTACHMENT C-7 (LIDB Validation)
ATTACHMENT C-8 (Directory Listings)
ATTACHMENT C-9 (911 Access)
ATTACHMENT C-10 (Operator Call Processing Access Service)
ATTACHMENT C-11 (Directory Assistance Access Service)
ATTACHMENT C-12 (CMDS Hosting)
ATTACHMENT C-13 (Non-Sent Paid Report System)
ATTACHMENT D (SPNP-RCF Interim Costs)
ATTACHMENT E (SPNP-DID Interim Rates)
ATTACHMENT F (Blanket Agency Agreement)
iii
INTERCONNECTION AGREEMENT
BETWEEN
BUSINESS TELECOM, INC. (BTI)
AND BELLSOUTH COMMUNICATIONS
Pursuant to this Interconnection Agreement (Agreement) Business
Telecom, Inc. (BTI) on behalf of its local exchange operating subsidiaries
identified on Attachment A as it shall be amended from time to time
(collectively BTI ) and BellSouth Telecommunications Inc. (BellSouth)
(collectively "the Parties" ) agree to extend certain interconnection
arrangements to one another within each LATA in which they both operate. This
Agreement is an integrated package that reflects a balancing of interests
critical to the Parties which the Parties believe is not inconsistent with
Sections 251, 252 and 271 of the Telecommunications Act of 1996.
I. RECITALS AND PRINCIPLES
WHEREAS, BellSouth is an incumbent local exchange telecommunications
company (ILEC) authorized to provide telecommunications services in the states
of Alabama, Florida, Georgia, Kentucky, Louisiana, Mississippi, North Carolina,
South Carolina and Tennessee; and
WHEREAS, BTI is a competitive local exchange telecommunications company
(CLEC) which is authorized or plans to become authorized to provide local
telecommunications services in the states of Alabama, Florida, Georgia,
Kentucky, Louisiana, Mississippi, North Carolina, South Carolina, and Tennessee;
and
WHEREAS, the interconnection and interoperability of the Parties'
respective local networks is required to facilitate the introduction of local
exchange service competition and fulfill the objectives of the
Telecommunications Act of 1996 (Telecommunications Act); and
WHEREAS, universal connectivity and interoperability between competing
telecommunications carriers is necessary for the termination of traffic on each
carrier's network; and
WHEREAS, the Parties intend that BellSouth should unbundle certain
basic network elements and make them available for purchase by BTI; and
WHEREAS, the Parties agree that this Agreement shall be filed with the
appropriate state commissions in compliance with Section 252 of the
Telecommunications Act;
NOW, THEREFORE, in consideration of the mutual provisions contained
herein and other good and valuable consideration, the receipt and sufficiency of
which are hereby acknowledged, BTI and BellSouth hereby covenant and agree as
follows:
II. SCOPE OF THE AGREEMENT
This Agreement will govern the interconnection and resale arrangements
between the Parties to facilitate the interconnection of their facilities and
the connection of local and interexchange traffic in the states of Alabama,
Florida, Georgia, Kentucky, Louisiana, Mississippi, North Carolina, South
Carolina, and Tennessee. This agreement will further govern the unbundling of
BellSouth network elements in the same states. The Agreement will be filed for
approval of the agreed terms with state commissions in each of the states listed
above. BTI will petition for state commission arbitration of the unresolved
issues referred to herein. Upon conclusion of such state commission arbitration
proceedings, the Agreement will be amended to reflect the decided issues and
filed for approval consistent with the terms of Section 252(e) of the
Telecommunications Act.
III. DEFINITIONS
The definitions contained in Attachment B are intended to define and
govern how the terms included therein are used in this Agreement. However,
except as provided herein, the inclusion or exclusion of any particular
definition is not intended by either party to limit, or to define technical
interface, reliability, throughput and operational characteristic of elements
identified herein, as well as physical and logical interface standards utilized,
unless otherwise specifically provided herein, are according to generally
accepted industry standards as defined by the ITU (ISO/CCITT), ANSI, or the
Network Management Forum, whichever is more specific. Where standards are not
yet fully defined, the Parties agree to take reasonable steps to insure that
interface designs are modularized and retrofitable to any pending standard at
the least cost to the interconnecting Parties.
IV. ACCESS TO UNBUNDLED NETWORK ELEMENTS
BellSouth shall unbundle network elements used in the provision of a
telecommunications service and offer them for resale to BTI as provided
hereafter. BTI shall be entitled to request, and BellSouth shall provide, access
to any such unbundled network element(s). BellSouth shall unbundle such network
elements where technically feasible, and separately price and offer those
elements such that BTI will be able to lease and interconnect to provided
network elements with any facilities and services that BTI may itself provide or
obtain from other telecommunications carriers, in order to offer
telecommunications services to other telecommunications carriers and end users.
Such network elements shall be offered as provided hereafter.
A. General Requirements
A.1 The Parties hereto mutually understand and agree that the array of
network elements is steadily evolving and expanding. The initial set of network
elements and attendant services to be made available by BellSouth hereunder is
included as Attachment C hereto. Network elements will be provided subject to
the rules, terms and conditions expressed in this
2
Article and in Attachment C. It is understood, however and mutually agreed that
either Party may add network elements to the listing contained in Attachment C
as the BellSouth network changes or additional network elements are identified.
It is especially acknowledged, without limitation, that the list of network
elements may be expanded by either Party to include network elements identified
in relevant FCC or state commission regulations or orders, or made available by
BellSouth to other telecommunications carriers pursuant to other interconnection
agreements. The addition or inclusion of additional network elements shall be
made in accordance with subsection IV.I hereof.
A.2 Without limitation BellSouth agrees to provide BTI access to all
network elements identified in Attachment C hereto. Wherever technically
feasible, interconnection shall be offered at the line and/or trunk side of each
discrete network element. It is agreed that interconnection will be made
available by BellSouth to BTI at any technically feasible point. BellSouth must
implement physical and logical interconnection points consistent with generally
accepted industry standards.
A.3 Initial pricing of network elements is included in Attachment C
hereto, provided the Parties hereby agree that BTI will petition for state
commission arbitration to establish initial pricing of both nonrecurring and
recurring charges applicable to the provision of unbundled loops, cross
connections, loop channelization, unbundled ports, and associated facilities,
and services. In addition, the initial pricing may be revised by mutual
agreement or at BTI's election pursuant to Article XXII hereof.
A.4 It is agreed that BTI may combine network elements purchased
hereunder as required to provide any local toll or access service. If BTI
recombines network elements to mirror existing retail service, as defined by the
applicable state commission, the resale rate shall apply.
B. Interconnection with Network Elements
B.1 Interconnection shall be achieved via any or all of the methods
specified in Section C.I "Facilities for Local Interconnection".
B.2 At BTI's discretion each unbundled loop or port element shall be
delivered to the BTI collocation arrangement over an individual 2-wire hand-off,
in multiples of 24 over a digital DS-I hand-off in any combination or order BTI
may specify, in multiples of 672 over a digital DS-3 hand-off in any combination
or order BTI may specify or through other technically feasible and economically
comparable hand-off arrangements requested by BTI. Economically comparable as
used in this section refers to an economically comparable effect upon BTI and is
not meant to ensure an equivalent revenue stream or contribution level to
BellSouth.
B.3 BellSouth will permit BTI to collocate DLC systems in conjunction
with collocation arrangements BTI maintains at a BellSouth wire center, for the
purpose of interconnecting to unbundled loop elements. BTI will have the option
of purchasing BellSouth unbundled transport (at any transmission level) between
placed equipment and the BTI network.
3
B.4 BTI shall access BellSouth's unbundled loops via collocation at the
BellSouth wire center where those elements exist. Each loop or port shall be
delivered to BTI's collocation by means of a cross connection.
B.5 BellSouth shall provide BTI access to its unbundled loops at each
of BellSouth's Wire Centers. In addition, if BTI requests one or more loops
serviced by Integrated Digital Loop Carrier or Remote Switching technology
deployed as a loop concentrator, BellSouth, shall where available, move the
requested loop(s) to a spare, existing physical loop. If, however, no spans
physical loop is available, BellSouth shall within seventy-two (72) hours of
BTI's request notify BTI of the lack of available facilities. BTI may then, at
its discretion, make a network element request for BellSouth to provide the
unbundled loop through the demultiplexing of the integrated digitized loop(s).
B.6 Where BellSouth utilizes digital loop carrier (DLC) technology to
provision the loop element of an unbundled exchange service to an end user
customer who subsequently determines to assign the loop element to BTI and
receive Exchange Service from BTI via such loop BellSouth shall deliver such
loop to BTI on an unintegrated basis pursuant to BTI's chosen hand-off
architecture without a degradation of end user service or feature availability
B.7 Except as otherwise specified herein, all dedicated transport-based
features, functions, service attributes, grades-of-service, install, maintenance
and repair intervals which apply to BellSouth's bundled local exchange service
shall apply to unbundled loops.
B.8 Except as otherwise specified herein, all switch-based features,
functions, service attributes, grades-of-service, and install, maintenance, and
repair intervals which apply to BellSouth's bundled local exchange service shall
apply to unbundled ports.
B.9 BellSouth will permit any customer to convert its bundled local
service to an unbundled element or service and assign such unbundled element or
service to BTI with no penalties, rollover, termination or conversion charges to
BTI or the customer, except as specifically provided in Attachment C-2 hereto or
pursuant to the terms of a specific customer service agreement, if BellSouth
waives like charges and penalties for any other telecommunications carrier,
(unless superseded by government action).
B.10 BellSouth will permit BTI to collocate remote switching modules
and associated equipment in conjunction with collocation arrangements BTI
maintains at a BellSouth wire center, for the purpose of interconnecting to
unbundled loop or link elements.
B.11 When available to any other telecommunications carrier or other
customer, BellSouth shall provide BTI with an appropriate on-line electronic
file transfer arrangement by which BTI may place, verify, and receive
confirmation on orders for unbundled elements, and issue and track
trouble-ticket and repair requests associated with unbundled elements. In the
interim, batch file arrangements specified in BellSouth's current Facilities
Based Carrier Operating Guide (FBOG) shall apply. BellSouth shall provide BTI
with the ability to order any defined network element using OBF or other
mutually agreed upon ordering/provisioning codes.
4
B.12 It is expressly agreed that interconnection will be afforded
equally regardless of the transmission medium selected by the interconnector
i.e., digital or analog loops, conditioned circuits, ISDN, SONET, wherever
present in BellSouth's network, so that networks and applications can evolve
unencumbered by the available degree of interconnectivity.
B.13 Wherever technically feasible it is expressly agreed and
understood that BellSouth will provide interconnection on the line side and/or
trunk side of each unbundled Network Element. Where interconnection is ordered
to the line side of a Network Element, interconnection shall be on a hardwired
(not software driven) basis.
B.14 BellSouth shall develop a process to identity the carrier for each
unbundled loop and establish automated intercompany referral and/or call
hand-off processes. In addition, BellSouth will not in any way hinder BTI from
deploying modem DLC 'equipment (TR303) throughout the unbundled loop/transport
network.
C. Order Processing
C.1 BTI shall place orders for unbundled loops (and other network
elements) through completion and submission of the Service Order form specified
in the FBOG. The installation time intervals which shall apply thereto are as
expressed in subsection IV.D hereafter.
C.2 Order processing for unbundled loops shall be mechanized in a form
consistent with industry standards. If made available by BellSouth to any other
telecommunications carrier, automated interfaces shall be provided in a
centralized operations support systems database for installation scheduling,
confirmation of circuit assignments and completion confirmation.
C.3 Particular combinations of elements hereafter referred to as
combinations, identified and described by BTI can be ordered and provisioned as
combinations, and not require the enumeration of each element within that
combination in each provisioning order, consistent with OBF or other mutually
agreed upon procedures.
C.4 Appropriate ordering/provisioning codes will be established for
each identified combination consistent with OBF or other mutually agreed upon
procedures.
C.5 When combinations are ordered where the elements are currently
interconnected and functional those elements will remain interconnected and
functional (except for the integrated SLC).
C.6 When the open network access platform is available, BellSouth will
provide BTI with the ability to have the BellSouth end office AIN triggers
initiated via an appropriate service order from BTI.
C.7 BTI and BellSouth will negotiate in good faith to create a mutually
acceptable standard service order/disconnect order format, consistent with OBF
or other mutually agreed upon procedures.
5
C.8 BellSouth shall exercise best efforts to provide BTI with the "real
time" ability to schedule installation appointments with the customer on-line
and access to BellSouth's schedule availability beginning in the second calendar
quarter of 1997. In the interim BellSouth will make best efforts to install
unbundled loops and other network elements by the Customer Desired Due Date
(CDDD) where facilities permit. Service requests with shorter intervals than
normal intervals or those that require out-of-hours provisioning may be subject
to additional charges.
C.9 When available to any other telecommunications carrier or other
customer, BellSouth shall provide "real time" response for firm order
confirmation, due date availability/scheduling dispatch required or not,
identify line option availability by Local Service Office (LSO) (such as digital
copper, copper analog, ISDN) completion with all service order and time and cost
related fees, rejections/errors on service order data element(s) jeopardizes
against the due date, missed appointments, additional order charges
(construction charges), order status, validate street address detail, and
electronic notification of the local line options that were provisioned. This
applies to all types of service orders and all network elements.
C.10 BellSouth will provide to BTI escalation procedures for ordering
and provisioning. If an expedite is requested by BTI on the customer's behalf,
normal expedite charges shall apply.
D. Conversion of Exchange Service to Network Elements
D.1 Installation intervals for service established via unbundled loops
will be handled in the same time frame as BellSouth provides services to its own
customers, as measured from the date upon which BellSouth receives the order to
the date of customer delivery.
D.2 BellSouth will make best effort to install unbundled loops and
other network elements by the Customer Desired Due Date (CDDD) where facilities
exist. Service requests with a shorter than standard interval or that require
out-of-hours provisioning may be subject to additional charges.
D.3 On each unbundled network element order in a wire center, BTI and
BellSouth will agree on a cutover time at least 48 hours before that cutover
time. The cut over time will be defined as a 60-minute window within which both
the BTI and BellSouth personnel will make telephone contact to complete the cut
over.
D.4 Within the appointed 60-minute cut over time, the BTI contact will
call the BellSouth contact designated to perform cross-connection work and when
the BellSouth contact is reached in that interval, such work will be promptly
performed.
D.5 If the BTI contact fails to call or is not ready within the
appointed interval and if BTI has not called to reschedule the work at least
eight (8) hours prior to the start of the interval, BellSouth and BTI will
reschedule the work order.
6
D.6 If the BellSouth contact is not available or not available at any
time during the 60-minute interval, BTI and BellSouth will reschedule.
D.7 The standard time expected from disconnection of a live Exchange
Service to the connection of the unbundled element to the BTI collocation
arrangement is 15 minutes.
D.8 If unusual or unexpected circumstances prolong or extend the time
required to accomplish the coordinated cut-over the Party responsible for such
circumstances is responsible for the reasonable labor charges of the other
Party. Delays caused by the customer are the responsibility of BTI.
D.9 If BTI has ordered Service Provider Number Portability (SPNP) as
part of an unbundled loop installation BellSouth will coordinate implementation
of SPNP with the loop installation.
D.10 If BellSouth provides in practice shorter scheduling lead times
and/or cutover windows than those specified in this section for the same
services for other carriers, it will do the same for BTI.
E. Service Quality
E.1 At a minimum, the service quality of leased network elements should
match that of BellSouth's own elements and conform to all Bellcore and ANSI
requirements applicable to the type of service being provided. In addition,
BellSouth will provide maintenance services on network elements purchased by BTI
which are timely, consistent and at parity with that provided when such elements
are used for its own purposes.
E.2 Maintenance support shall be available 7 days a week, 24 hours a
day. Provisioning support shall be available at the same times at which
BellSouth installs its own bundled local exchange services.
E.3 Installation and service intervals shall be the same as when
BellSouth provisions such network elements for use by itself, its affiliates or
its own retail customers.
E.4 In facility and power outage situations, BellSouth agrees to
provide network elements leased by BTI the same priority for maintenance and
restoration as similar elements used by BellSouth for itself or its affiliates.
E.5 The Parties agree that all interconnection arrangements and
services will at a minimum be subject to technical standards which are equal to
those that BellSouth affords to itself, other LECs, or other telecommunications
carriers. This must at a minimum include parity in:
o Port features
o Treatment during overflow/congestion conditions
o Equipment/interface protection
7
o Power redundancy
o Sufficient spare facilities to ensure provisioning,
repair performance and availability
o Mediation functions
o Standard interfaces
o Control over switch traffic parameters in a mutually
agreed upon method
o Access to integrated test functionality in a mutually
agreed upon method
o Real time access to performance monitoring and alarm
data, if BellSouth providing it to itself or any other
telecommunications provider.
F. Network Information Exchange
F.1 BellSouth shall provide BTI with information sufficient to
determine an end user's existing service and feature configurations.
F.2 BellSouth agrees to provide BTI with detailed design layout records
(DLR) for unbundled loops and circuits.
F.3 BellSouth shall provide information to BTI on a continuing basis
required to keep BTI apprised of engineering changes associated with BellSouth's
network elements and its deployment of new technologies.
F.4 BellSouth shall provide BTI with a detailed description of the
criteria and procedures used for handling facility and power outages.
F.5 Where permitted by law BellSouth will make available to BTI
electronic (magnetic tape and/or diskette) and hard copies of its Master Street
Address Guide (MSAG) and any regular updates thereof.
F.6 BellSouth will provide BTI with access to a listing and description
of all services and features available down to street address detail, including:
Type of Class 5 switch by CLLI, line features availability by LSO, and service
availability by LSO as well as the data elements required by BellSouth to
provision all such services and features.
G. Maintenance and Trouble Resolution
G.1 BellSouth shall provide automated interfaces to BTI for field
dispatch scheduling, status of repairs and confirmation of repair completion.
The mean time to repair unbundled loops shall be equivalent to the mean time to
repair reported by BellSouth for its retail customers.
G.2 Service centers shall be established by both Parties to handle
service issues, escalations, resolution of billing issues and other
administrative problems. Automated interfaces (such as the carrier gateway)
shall be provided into a centralized customer support systems databases for
access to services and features purchased by BTI from BellSouth.
8
G.3 The Parties agree to establish a real time automated industry
standard electronic interface (EBI) to perform the following functions:
o Trouble Entry
o Obtain Trouble Report Status
o Obtain Estimated Time To Repair (ETTR) and ILEC Ticket
Number
o Trouble Escalation
o Network Surveillance - Performance Monitoring (i.e.
proactive notification of "auto detects" on network
outages)
G.4 The Parties agree to adopt a process for the efficient management
of misdirected service calls.
G.5 BellSouth will establish and staff a Maintenance Center to act as
BTI's single point of contact for all maintenance functions which will operate
on a 24 hour a day, 7 days a week basis.
G.6 All trouble shooting will be performed by BellSouth and BellSouth
will be responsible for the reported trouble until tanned back to BTI.
G.7 The Parties agree to establish an escalation process for resolving
maintenance troubles.
G.8 BellSouth shall perform Mechanized Loop Tests (Quick Test) at the
request of BTI while BTI is on line.
G.9 BellSouth shall provide progress status reports sufficient to
enable BTI to provide end user customers with detailed information and an
estimated time to repair (ETTR).
G.10 BellSouth will close all trouble reports with BTI. BTI will close
all trouble reports with the end user.
G.11 BellSouth will not undertake any work at an end user's request for
which BTI would be charged without obtaining the prior approval of BTI. This
includes authorizations by BTI if a dispatch is required to the customer
premises as well as verification of actual work completed.
G.12 All Auto/Subscriber Line Tests (ALIT/SLIT) tests performed on BTI
customers that result in a failure will be reported to BTI.
G.13 BTI will coordinate dispatches to the customer premise. This
includes redispatches for customer access not available.
G.14 BellSouth will ensure that all applicable alarm systems that
support BTI customers are operational and the supporting databases are accurate
so that equipment that is in alarm will
9
be properly identified. BellSouth will respond to BTI customer alarms consistent
with how and when they respond to alarms for their own customers.
G.15 Nondiscriminatory emergency restoration and disaster recovery
plans will be developed consistent with TSR essential line procedures. The plans
should outline methods for the restoration of each central office in the local
network provider territory as well as contain site specific restoration
alternatives which can be implemented based on the magnitude of the disaster.
Each plan should incorporate at a minimum the following elements:
a. A BellSouth single point of contact which shall be:
o Responsible for notification of the BTI work center
o Responsible for the initiation of BellSouth's restoration
plan
o Responsible for status and problem resolution during the
entire restoration process
b. A restoration equipment dispatch plan which will establish a:
o Documented procedure on how equipment will be dispatched to
the restoration site
o Estimated maximum time for the restoration equipment to
arrive on site
c. Prior notification with the option to influence the decision
of any scheduled maintenance activity performed by the local
supplier that may be service affecting to BTI local customers
(i.e. cable throws power tests etc.).
H. Billing for Network Elements
H.1 BellSouth will xxxx all unbundled elements and associated services
purchased by BTI (either directly or by previous assignment by a customer) on no
more than two (2) consolidated statements per Point of Interconnection (POI)
with sufficient billing detail to enable BTI to reasonably audit such charges.
H.2 Invoices must be presented monthly in a Carrier Access Billing
Systems (CABS) and/or Customer Record Information System (XXXX) format in order
to facilitate standard industry auditing practices. BTI and BellSouth will agree
on the flow and format of CARE records for correct provisioning and billing to
IXC's.
I. Addition of Network Elements
BTI may request that BellSouth allow purchase and interconnection of
additional Network Elements (including, without limitation, sub-loop unbundling
and databases not otherwise discussed herein) at any time by making a demand in
writing including a proposed revised Attachment C. BellSouth will respond in
writing within thirty (30) days of receipt of such a request, and either accept
or reject the service request. BellSouth may not refuse to make the requested
Network Element available if its availability is required by FCC or state
commission requirements, the Network Element is provided to any other
telecommunications carrier or
10
interconnection is technically feasible and failure to obtain access to such
Network Element might impair the ability of BTI to provide telecommunications
services. Pricing of such additional elements shall be provided within
forty-five (45) days of receipt of the request for service and shall be in
accordance with the requirements of 47 U.S.C. ss. 252(d)(1). BellSouth will
exercise best efforts to accomplish actual interconnection and provision of
service within ninety (90) days of receipt of the service request.
V. LOCAL TRAFFIC INTERCONNECTION ARRANGEMENTS
A. Types of Local Traffic to Be Exchanged
The Parties agree to provide the necessary facilities and equipment to
allow for the exchange of the following types of traffic between BellSouth and
BTI:
A.1 Local Exchange: Local traffic to be terminated on each party's
local network so that customers of either party have the ability to reach
customers of the other party without the use of access codes.
A.2 Exchange Access: The offering of access to telephone exchange
services or facilities-based origination and termination of intraLATA or
interLATA toll services.
A.3 IXC Transit: BellSouth shall provide intermediary network access
service between BTI and any IXC for the purpose of completing interLATA or
intraLATA toll traffic.
A.4 Other Transit Functions: The Parties shall provide intermediary
tandem switching and transport services for the other Party's s connection of
its end user to a local end user of other CLECs, other ILECs, and wireless
telecommunications providers which are connected to such Party's network.
A.5 Intelligent Network and Network Surveillance: BellSouth shall
provide open logical interconnection points to an AIN/IN interface in their
network. BellSouth must also provide access to monitoring, surveillance, and
other fraud control functions in its network.
A.6 Other Services: BellSouth shall provide connection and call routing
for 911, directory assistance and operator assistance services.
B. Designated Points of Interconnection
The Parties shall designate Points of Interconnection (POIs) on each
other's networks. BTI shall at a minimum designate a POI at each BellSouth
access tandem serving the local calling area of the exchanges being served by
BTI. BTI may designate additional POIs within a BellSouth local calling area and
BellSouth will not unreasonably refuse to interconnect at each such designated
POI. BellSouth may designate a POI at one or more of BTI's local switching
centers within each LATA in which BTI is providing local service. If no BTI
local switching
11
center is located within such LATA, the Parties will arrange a POI at a mutually
agreed point within such LATA. BTI will not unreasonably refuse to interconnect
at a POI designated by BellSouth.
B.1 Interconnection will be available at any technically feasible point
that is used in the transmission of voice, data or other types of traffic.
B.2 Reciprocal connectivity shall be established at each and every
BellSouth access tandem within the local calling area BTI desires to serve for
interconnection to those end offices that subtend the access tandem. At it's
discretion, BTI may elect to interconnect directly at any BellSouth end offices
for interconnection to end users served by that end office. Such interconnecting
facilities shall conform, at a minimum, to the telecommunications industry
standard of DS-I pursuant to Xxxxxxxx Xxxxxxxx Xx. XX-XXX-00000. Signal transfer
point, Signaling System 7 (SS7) connectivity is required at each interconnection
point where available. BellSouth will provide out-of-band signaling using Common
Channel Signaling Access Capability where technically and economically feasible,
in accordance with the technical specifications set forth in the BellSouth
Guidelines to Technical Publication TR-XXX000000. The Parties agree that their
facilities shall provide the necessary on-hook, off-hook answer and disconnect
supervision and shall hand off calling party number ID where technically
feasible.
B.3 In accordance with Section V.C hereafter, collocation arrangements
will be established which are suitable for use in BTI/BellSouth local
interconnection and BTI access to unbundled BellSouth network components.
Allowable collocation equipment includes transmission and concentrating
equipment.
B.4 In accordance with Section V.D hereafter, the Parties agree to
establish trunk groups such that each Party provides a reciprocal of each trunk
group established by the other Party. The Parties agree to install efficient and
sufficient facilities to carry traffic (1) to route calls originating on its
network and terminating on the other carrier's network to its POI, and (2) to
route calls originating on the other local exchange carrier's network, but
terminating on its network from that carrier's POI, and will work cooperatively
to ensure such. Notwithstanding the foregoing, each Party may construct its
network, including the interconnecting facilities, to achieve optimum cost
effectiveness and network efficiency.
B.5 Each Party shall be responsible for routing calls to the POI for
termination via the other's facilities. Each Party shall bear its own costs
related to installation at the POI. BTI may establish POIs on the BellSouth
network via a negotiated expanded interconnection arrangement or via leased
transport between the BTI network and the BellSouth access tandem. BellSouth may
establish POIs on the BTI network via an expanded interconnection arrangement at
the BTI local switching center or via leased transport between an BTI expanded
interconnect arrangement and an BTI local switching center.
B.6 Either Party may use the POI for the interconnection of other types
of services, such as toll services, subject to the applicable rates for such
interconnection.
12
B.7 BellSouth may not impose any restrictions on traffic types
delivered to or from the POI(s). Notwithstanding the foregoing, the Parties
hereto agree that no interexchange access services traffic will be exchanged as
local traffic hereunder.
B.8 Once traffic is delivered to the POI, it is the terminating
carrier's responsibility to terminate the traffic to its end users. Calls should
be terminated using the same network, ensuring the same quality of service, as
the carrier provides its own customers.
B.9 There will be no re-arrangement, reconfiguration, disconnect, or
other non-recurring fees associated with the initial reconfiguration of each
carrier's traffic exchange arrangements upon execution of this agreement.
B.10 BellSouth will absorb any applicable nonrecurring charges incurred
by BTI as a result of network redesigns/reconfigurations initiated by BellSouth
to its own network.
C. Facilities for Local Interconnection
C.1 The Parties agree that there are four appropriate methods of
interconnecting facilities: (1) virtual collocation where physical collocation
is not practical for technical reasons, because of space limitations or at the
option of the Party requesting interconnection; (2) physical collocation; and
(3) interconnection purchase of facilities from either party by the other party
and (4) mid fiber meet. Rates and charges for collocation are set forth in
Attachment C-1 hereto and applicable provisions of BellSouth's access service
tariffs.
C.2 Each Party hereto at its election shall have the sole right and
discretion to specify any one of the following methods for interconnection at
the POI:
a. a meet in a manhole or other appropriate junction point inside,
near to, or just outside the wire center designated as the POI
in which case the Party requesting interconnection shall
additionally have the sole right and discretion to effect such
meet by leasing from a third party, fiber facilities into the
POI meet junction point (i.e.,. virtual collocation);
b. a collocation facility which it maintains at the other Party's
POI wire center (i.e., physical collocation);
c. a collocation facility maintained at the POI wire center by a
third party with whom the Party requesting interconnection has
contracted for such purpose; or
d. a digital transport facility(ies) leased from the other Party
hereto under the most favorable contract or tariff terms
offered, where such facility(ies) extends to the POI from some
second point designated by the Party requesting interconnection.
13
The Party requesting interconnection may, upon 60 days advance written notice to
the other Party, change from one of the interconnection methods specified above
to another of the networks specified above. A mutually acceptable certified
vendor for the installation of physical collocation equipment can be employed by
the Party making the change to implement such changes, in which case no
conversion or rollover charges will be assessed by the other party.
C.3 Existing BTI special access collocation arrangements with BellSouth
shall be available for use by BTI in the provision of switched services
hereunder at no additional charge to BTI.
C.4 BTI may at its option replace current virtual collocation
arrangements at any location with physical collocation arrangements. The Parties
agree that no termination penalties or liabilities will apply to the termination
of existing virtual collocation arrangements. A certified vendor for the
installation of physical collocation equipment can be employed by the Party
making the change to implement such a replacement, in which case no conversion,
installation or non-recurring charges will be assessed by the other Party.
D. Trunking and Signaling
D.1 a. The Party receiving traffic for termination can elect to
receive the traffic in one of two ways: (a) over separate
trunks for local and non-local; or (b) on combined trunks;
provided that separate trunk groups shall be utilized where
the delivering party is unable to furnish an auditable
percent local usage (PLU) factor to the party receiving the
traffic on a quarterly basis.
b. If direct end office bunking with combined trunks is used,
the Parties will work cooperatively to develop a procedure
for accurately determining the amount of interLATA access
traffic for proper application of switched access charges.
D.2 Trunking shall be available to any switching center designated by
either carrier: including end offices, access tandems, 911 routing switches,
directory assistance/operator services switches, or any other feasible point in
the network. The Parties shall have the option for either one-way or two-way
bunking. Directionality in this case refers to the traffic flowing between two
networks, not to the logical or physical configuration of the trunk. All trunks
should be configured two-way for testing purposes only.
D.3 Trunking can be established to tandems or end offices or a
combination as mutually agreed. Normally, bunking will be at the DS- 1 level. On
a trunk group specific basis, the Parties may agree to establish bunking at
higher (e.g., DS-3) levels. Initial bunking will be established between the BTI
local switching centers and the BellSouth access tandems. The Parties will
utilize direct end office bunking under the following conditions:
a. BellSouth tandem exhaust - If a BellSouth access tandem to
which BTI is interconnected is unable to, or is forecasted to
be unable to, support
14
additional traffic loads for any period of time, the Parties
will mutually agree on an end office bunking plan that will
alleviate the tandem capacity shortage and ensure completion
of traffic between BTI and BellSouth subscribers.
b. Traffic volumes - The Parties shall install and retain end
office bunking sufficient to handle actual or reasonably
forecast traffic volumes, whichever is greater, between an
BTI local switching center and a BellSouth end office where
traffic between such points exceeds or is forecast to exceed
125,000 minutes of local traffic per month. The Parties will
install additional capacity between such points when overflow
traffic between the BTI switching center BellSouth access
tandem exceeds or is forecast to exceed 125,000 minutes of
local traffic per month.
c. Mutual agreement - The Parties may install direct end office
bunking upon mutual agreement in the absence of conditions
(a) or (b) above and agreement will not unreasonably be
withheld.
D.4 The Parties will provide Common Channel Signaling (CCS) to one
another, where and as available, at no charge, in conjunction with all POI trunk
groups. The Parties will cooperate in the exchange of Transaction Capabilities
Application Part (TCAP)) messages to facilitate full interoperability of
CCS-based features between their respective networks, including all CLASS
features and functions, to the extent each carrier offers such features and
functions to its own end users. All CCS signaling parameters will be provided
including calling party number (CPN), originating line information (OLI) calling
party category, charge number, etc. All privacy indicators will be honored.
Where available, network signaling information such as Carrier Identification
Parameter (CCS platform) and CIC/OZZ information (non-CCS environment) will be
provided wherever such information is needed for call routing or billing. The
Parties will follow all Ordering and Billing Forum (OBF) adopted standards
pertaining to CIC/OZZ codes. Where CCS is not available, inband multi-frequency
(MF) wink start E&M channel associated signaling will be provided. Such MF
arrangements will require a separate trunk group between BTI's switch and one
specified BellSouth switch.
D.5 BTI shall establish CCS interconnection with BellSouth signal
transfer provider.
D.6 BTI may opt at any time to terminate to BellSouth some or all local
exchange traffic and intraLATA toll traffic originating on its network, together
with switched access traffic, via Feature Group A, B, C or D Switched Access
services which BTI may otherwise purchase from BellSouth, subject to the rates,
terms and conditions specified in BellSouth's applicable switched access
tariffs. At no time shall BTI be required to route outbound traffic via
facilities for which a full retail or end user toll charge would be assessed
when parallel FG-A, FG-B, FG-C, or FG-D routing, or routing via a different
carrier exists which is capable of carrying and completing said traffic at more
favorable rates.
15
D.7 The Parties will cooperate to jointly plan for the deployment of
intercompany 64 Kbps per second clear channel capability.
D.8 Service arrangements hereunder shall be engineered to an objective,
consistent P.01 or better grade of service at the peak busy hour.
D.9 The Parties shall periodically exchange technical descriptions and
trunk/traffic forecasts of their interconnection and traffic requirements in
sufficient detail to assure traffic completion to and from all customers within
the appropriate calling areas.
D.10 BellSouth shall deliver intraLATA traffic originating from its
subscribers and terminating to BTI's subscribers via a trunk group using
facilities leased from BTI on mutually agreeable terms.
D.11 BellSouth will provide interconnection to and from intelligent
network, signaling, monitoring, surveillance and fraud control points.
D.12 BellSouth shall provide and implement all mandatory industry
standard SS7 parameters as well as procedures that are defined in the applicable
Bellcore standards, even if today's services do not specifically require these
features. These functions shall include:
a. All functions of the ISUP, TCAP, SCCP, and MTP as specified
in relevant Bellcore specifications.
b. All functions of the OMAP, including MTP Routing Verification
Test (MRVT) and SCCP Routing Verification Test (SRVT).
D.13 BellSouth shall provide a signaling link which consists of a 56
Kbps transmission path or other rates as defined by ANSI standards between BTI
designated Signaling Points of Interconnection (SPOIs), satisfying an
appropriate requirement for physical diversity.
D.14 The Parties shall meet or exceed SS7 performance objectives as
described in Bellcore TR-905 section 7, and MTP and SCCP performance as
specified by ANSI.
D.15 Either Party shall have the option for Multi-Frequency (MF)
signaling, but only when either party does not have the technical capability to
provide SS7 facilities.
D.16 Other Signaling Requirements:
a. CIP shall be provided (CIC within the SS7 call set-up
signaling protocol) at tariffed charges.
b. All mandatory SS7 signaling parameters must be provided
including Calling Party Number (CPN). All privacy indicators
must be honored.
c. The Parties must provide Signaling System 7 (SS7) to one
another.
16
E. Network Management
E.1 The Parties agree to work cooperatively to install and maintain
reliable interconnected telecommunications networks, including but not limited
to, the exchange of appropriate information concerning network changes that
affect services to the other Party, maintenance contact numbers and escalation
procedures.
E.2 The interconnection of all networks will be based upon accepted
industry/national guidelines for transmission standards and traffic blocking
criteria.
E.3 The Parties will work cooperatively to apply sound network
management principles by invoking appropriate network management controls (e.g.,
call gapping) to alleviate or prevent network congestion.
E.4 The Parties will cooperate to determine the performance of their
respective networks and will implement joint management controls to further
overall service integrity.
E.5 The Parties will jointly develop and agree on a Joint
Interconnection Grooming Plan prescribing standards to ensure that traffic
exchanged over the POI trunk groups experiences a consistent P.01 or better
grade of service peak busy hour, and other appropriate, relevant
industry-accepted quality, reliability and availability standards. Such plan
shall also include mutually agreed upon standards for the configuration of
segregated POI trunk groups. In addition, the plan shall also include standards
and procedures for notification of trunk disconnections and discoveries of trunk
disconnections. Neither Party shall be expected to maintain active status for a
trunk disconnected by the other Party for an extended or indefinite period of
time. The Parties will use their best collective good faith efforts to complete
and agree on a Joint Interconnection Grooming Plan within 90 days following
execution of this agreement.
E.6 BellSouth will establish and adhere to industry standard intervals
for the delivery of FOCs, DLRs and facilities. Such intervals need to ensure
that facilities are provisioned in time frames and according to standards that
meet or exceed those that BellSouth provides to itself for its own network and
end users. Intervals should not exceed the Customer Designated Date (CDD).
E.7 Upon request, BellSouth will provide BTI with access to the
BellSouth maintenance and trouble report systems including the following systems
and/or functionality:
o Trouble reporting/dispatch capability - access must be
real time.
o Repair status/confirmation; maintenance/trouble report
systems
o Planned/unplanned outage reports (where available to any
other telecommunications carrier)
E.8 Each Party has the duty to alert the other to any network events
that can result or has resulted in service interruption, blocked calls, or
changes in network performance, on a real time basis.
17
E.9 BellSouth will adopt any multi-ILEC trouble management procedures
and escalation processes developed by the NOF.
E.10 The Parties will work cooperatively to plan and implement
coordinated repair procedures for the local interconnection trunks and
facilities to ensure trouble reports are resolved in a timely and appropriate
manner.
E.11 The Parties will provide each other with a trouble reporting
number that is readily accessible and available 24 hours a day, 7 days a week.
In addition, the Parties will provide each other test-line numbers and access to
test lines.
E.12 The quality of interconnection services should be no less than
that provided by BellSouth for its own services.
E.13 Installation and restoration of interconnection circuits by
BellSouth for BTI will be given equal priority as is given by BellSouth to
similar services performed by BellSouth for any other telecommunications
carrier.
E.14 The time interval for installation of POIs by BellSouth will be
negotiated on an ICB basis, subject to an agreement that installation of such
POIs will be completed within a target of sixty (60) calendar days.
E.15 Completion confirmation shall be provided to ensure that all
necessary translation work is completed on newly installed facilities.
E.16 The Parties shall periodically exchange technical descriptions and
forecasts of their interconnection and traffic requirements in sufficient detail
to assure traffic completion to and from all customers within the appropriate
calling areas.
E.17 BellSouth will provide and update an electronic copy of their
Switch Network ID Database with a complete list of features and functions by
switch, i.e., NPA/NXXs, rate centers, etc.
F. Local Number Assignment
BTI will assign telephone numbers to its customers using at least one
NXX per BellSouth tariffed local exchange metropolitan area; provided, that
sufficient quantities of numbering resources are made available to BTI.
G. Cross-Connection to Other Collocators
Where one Party collocates in the wire center of the other Party, the
Party operating the wire center shall allow the Party collocated at the wire
center to directly interconnect to any other entity which maintains a
collocation facility at that same wire center. The Party operating the wire
center shall enable such interconnection by effecting a cross-connection between
those
18
collocation facilities, as jointly directed by the Party collocated at the wire
center and the other collocated entity. For each such cross-connection, the
Party operating the wire center shall charge the otherwise applicable standard
tariff or contract special access cross-connect rate to the collocated Party. No
other charges shall apply for such cross-connection. BTI reserves its right to
petition for state commission arbitration of the pricing of such
cross-connections.
VI. LOCAL TRAFFIC EXCHANGE
A. Exchange of Traffic
The Parties agree for the purpose of this Agreement only that local
interconnection is defined as the delivery of local traffic to be terminated on
each party's local network so that customers of either party have the ability to
reach customers of the other party, without the use of any access code or delay
in the processing of the call. The Parties further agree that the exchange of
traffic on BellSouth's Extended Area Service (EAS) shall be considered local
traffic and compensation for the termination of such traffic shall be pursuant
to the terms of this section.
B. Compensation
With the exception of the local traffic specifically identified in
subsection (C), each party agrees to terminate local traffic originated and
routed to it by the other party. The Parties agree that BellSouth will track the
usage for both companies for the period of the Agreement. BellSouth will provide
copies of such usage reports to BTI on a monthly basis. For purposes of this
Agreement, the Parties agree that there will be no cash compensation exchanged
by the parties during the term of this Agreement unless the difference in
minutes of use for terminating local traffic exceeds 3 million minutes per state
on a monthly basis. In such an event, the Parties will thereafter negotiate the
specifics of a traffic exchange agreement which will apply on a going-forward
basis.
C. Transit Traffic
If either party provides intermediary tandem switching and transport
services for the other party's connection of its end user to a local end user
of: (1) a CLEC other than BTI; (2) an ILEC other than BellSouth; or (3) another
telecommunications company such as a wireless telecommunications service
provider, the party performing the intermediary function will xxxx a $0.002 per
minute charge. However, BellSouth agrees that BTI may cross-connect directly to
such third Parties at the POI. In such an event, tariffed cross-connection
nonrecurring charges will apply, and no transmitting charge will apply.
VII. MEET-POINT BILLING ARRANGEMENTS
Both Parties hereto provide interexchange access transport services to
IXCs and other access service customers. Pursuant to the terms of this
Agreement, BTI will interconnect at
19
selected BellSouth switches of its choosing for the purposes of providing
certain Switched Access Services. On such occasions, a portion of the access
transport service will be provided by each of the Parties hereto. This section
establishes arrangements intended to enable each of the Parties hereto to serve
and xxxx their mutual Switched Access Service customers, on an accurate and
timely basis. The arrangements discussed in this section apply to the provision
of both interLATA and intraLATA Switched Access Services. It is understood and
agreed that BTI is not obligated to provide any of its Switched Access
Service(s) through any specific access tandem switch or access tandem provider,
and may at its sole discretion, with due notice to those affected, modify its
serving arrangements on its own initiative.
A. Applicability of OBF Guidelines
Meet-point billing (MPB) arrangements shall be established between the
Parties to enable BTI to provide, at its option, Switched Access Services to
third Parties via specified LEC switches, in accordance with the Meet-Point
Billing guidelines adopted by and contained in the Ordering and Billing Forum's
MECAB and MECOD documents, except as modified herein. These arrangements are
intended to be used to provide Switched Access Service that originates and/or
terminates on an BTI-provided Exchange Service, where the transport component of
the Switched Access Service is routed through specified BellSouth switches.
B. Meet-Point Interconnection
B.1 The Parties shall establish MPB arrangements in each LATA or
locality where switched services are provided by BTI, between the
correspondingly identified Rating PointlSwitch pairs. BellSouth shall provide
homing/subtending access tandem arrangements through the same (or a closely
proximate) switching entity used for access services to BellSouth's end users.
This does not foreclose the possibility that other mutually agreeable
arrangements may be utilized by mutual agreement of the Parties where
appropriate.
B.2 At BTI's discretion, interconnection for the MPB arrangement shall
be established at the POI as described hereafter, at a collocation facility
maintained by BTI or an affiliate of BTI at specified BellSouth switches, or at
any point mutually agreed to by the Parties, consistent with the terms and
conditions herein.
B.3 Two-way meet point trunks which are separate from the local
interconnection trunk groups will be established to enable BTI and BellSouth to
provide Exchange Access Services to IXCs via a BellSouth Central Office. No
Party shall charge the other any amount for any meet point facilities unless one
Party is ordering trunks from the other.
B.4 Common Channel Signaling (CCS) shall be utilized in conjunction
with meet-point billing arrangements to the extent such signaling is technically
compatible with and economically reasonable to provide through the BellSouth
switch, except that MF signaling shall be used on a separate trunk group for
originating FGD access to Exchange Access Customers that uses the MF
20
FGD signaling protocol. The Parties may establish CCIS interconnection either
directly or through a third party.
B.5 BTI may establish CCS interconnections either directly or through a
third party. The Parties will exchange TCAP messages to facilitate full
interoperability of CCIS-based features between their respective networks,
including all CLASS features and functions to its own end users. The Parties
will provide all CCIS signaling, Billing Number, originating line information
(OLI) and any other such similar service. For terminating FGD, BellSouth pass
CPN if it receives CPN from FGD carriers. All privacy indicators will be
honored. Where available, network signaling information, such as Transit Network
Selection (TNS) parameter (CCIS platform) and OZZ/CIC information (non-CCIS
environment) will be provided whenever such information is needed for call
routing or billing. The Parties will follow all OBF adopted standards pertaining
to TNS and OZZ/CIC codes.
B.6 All originating Toll Free Service calls for which BellSouth
performs the Service Switching Point (SSP) function (e.g., performs the database
query) shall be delivered by BTI using GR-394 format over a trunk group
designated for Toll Free Service. Carrier Code "0110" and Circuit Code of "08"
shall be used for all such calls. In the event BTI becomes a toll free service
provider, BellSouth shall deliver traffic using the GR-394 format over a trunk
group designated for Toll Free Service.
B.7 All originating Toll Free Service calls for which BTI performs the
SSP function, if delivered to BellSouth, shall be delivered by BTI using GR 394
format over the meet point trunk group for calls destined to IXCs, or shall be
delivered by BTI using GR-3 17 format over the Local Interconnection Trunk Group
for calls destined to end offices that directly subtend BellSouth access
tandems.
B.8 Originating Feature Group B calls shall be delivered to BellSouth's
tandem using the interLATA trunk groups.
C. Tariffs
BTI and BellSouth will use their best reasonable efforts, individually
and collectively, to maintain provisions in their respective federal and state
access tariffs sufficient to reflect this MPB arrangement, including appropriate
MPB percentages consistent with applicable industry standard practice and in
accordance with Section VII.F hereafter.
D. Billing and Data exchange
D.1 Each Party shall implement the "Multiple Xxxx/Multiple Tariff"
option in order to xxxx an IXC for the portion of the jointly provided
telecommunications service provided by that Party. For all traffic carried over
the MPB arrangement, each Party shall only xxxx the rate elements identified for
it in this Agreement. For transport elements subject to billing percentages,
each Party shall utilize the billing percentages discussed in Section III.C
preceding
21
and Section VII.F hereafter. The actual rate values for each element shall be
the rates contained in that Party's own effective federal and state access
tariffs. The Parties shall utilize complementary monthly billing periods for
meet-point billing.
D.2 BellSouth may charge the IXC for use of the entrance facility, the
tandem switching and the mutually agreed portion of non-interconnection
transport charges. BellSouth will not include an element for the Residual
Interconnection Charge (RIC) and BTI will be entitled to xxxx and collect the
appropriate RIC and/or any other applicable rate elements.
D.3 Each party will provide to the other access records sufficient to
billing to the IXCs. Records shall be provided in the Exchange Message Record
format, Bellcore Standard BR 000-000-000, as amended.
D.4 BellSouth shall provide to BTI the billing name, billing address,
and CIC of the IXCs and copies of relevant IXC Access Service Requests (ASRs),
in order to comply with the MPB notification process as outlined in the MECAB
document, on an electronic medium basis using the EMR format.
D.5 BellSouth shall provide BTI, on a daily basis, switched access
detail usage data (EMR Category 1101XX records) on magnetic tape or via
electronic file transfer using EMR format, for calls from IXCs that have
transmitted BellSouth's tandems and terminated to BTI's center(s).
D.6 BTI shall provide BellSouth, on a monthly basis, switched access
summary usage data (EMR Category 11 50XX records) on magnetic tape or via
electronic file transfer using EMR format, for calls to IXCs which originate at
BTI's switching center(s).
D.7 The Parties will exchange test files to support the initial
implementation of the meet point billing processes provided for in this
Agreement. Exchange of test data will commence one week after AMA certification
begins. These data shall be actual recorded usage records.
D.8 Each Party shall coordinate and exchange the billing account
reference (BAR) and billing account cross reference (BACR) numbers for the MPB
Service. Each Party shall notify the other if the level of billing or other
BAR/BACK elements change, resulting in a new BAR/BACK number.
D.9 If access usage data is not processed and delivered by either Party
and sent to the other in a timely manner and in turn such other Party is unable
to xxxx the IXC, the delivering Party will be held liable for the amount of lost
billing.
D.10 Errors may be discovered by BTI, the IXC or BellSouth. Both
BellSouth and BTI agree to provide the other Party with notification of any
discovered errors within seven (7) business days of the discovery. In the event
of a loss of data, both Parties shall cooperate to
22
reconstruct the lost data and if such reconstruction is not possible, shall
accept a reasonable estimate of the lost data based upon three (3) to twelve
(12) months of prior usage data.
D.11 The Parties shall not charge one another for the services rendered
or information provided pursuant to this Section VII of this Agreement.
E. Toll Free IXC Traffic
MPB will apply for all traffic bearing the 800, 888, or any other
non-geographic NPA which may be likewise designated for such traffic in the
future, where the responsible party is an IXC. In those situations where the
responsible party for such traffic is a LEC, full switched access rates will
apply.
F. MPB Billing Percentages
The MPB billing percentage for each BTI Rating Point shall be
calculated according to the following formulas:
In any service jointly provided by BellSouth and BTI for which meet
point billing arrangements are adopted, the meet point billing percentages shall
be based on the relative distances (I.E., airline mileage) between the meet
point and the two rating points as follows:
a b
----- -----
BTI percentage = (a+b) BellSouth percentage = (a+b)
where "a" is the airline mileage between the relevant BTI rating point (E.G.,
serving switch) and the meet point and "b" is the airline mileage between the
BellSouth rating point and the meet point.
G. Special Arrangements
G.1 In a few instances, the involvement of yet a third provider of
switched access may be needed for particular traffic. For purposes of customer
billing, when three or more LECs are involved in the transmission of a
particular message, the intermediate carriers will have no rating point, and the
relevant mileage measurement is between the two end points.
G.2 In the case of IXC traffic terminating to BTI ported numbers, the
Parties will, unless IXC actual minutes of use can be measured, account for
access revenue on a state-by-state basis by using verifiable BellSouth/BTI
interstate and intrastate minutes of use reported on the applicable ARMIS report
at the total IXC access rates applicable to BellSouth less the BellSouth/BTI
meet point access minutes at the meet point billing access rates applicable to
BellSouth, with no other subtractions.
G.3 If either Party provides intermediary functions for network access
service connection between an IXC and another Party, each Party will provide
their own network access
23
services to the IXC on a meet-point basis. The meet-point billing arrangement
will be through the multiple xxxx. Each Party will xxxx its own network access
services rates to the IXC with the exception of the residual interconnection
charge. Each Party shall xxxx 50% of its residual interconnection charges in
such case.
VIII. TOLL TRAFFIC INTERCONNECTION
A. The delivery of interexchange toll traffic by a Party to the other
Party shall be reciprocal and compensation will be mutual. For terminating its
toll traffic on the other Party's network, each Party will pay the other Party's
tariffed terminating switched access rate, inclusive of the interconnection
charge and the carrier common line rate elements of the switched access rate.
The Parties agree that their terminating switched rate shall be the rate in
effect when the traffic is terminated.
B. For originating and terminating interexchange toll traffic, each
Party shall pay the other Party's tariffed switched network access service rate
elements. Said rate elements shall be as set out in the Parties' respective
access services tariffs as those tariffs are amended from time to time during
the term of this Agreement. The appropriate charges will be determined by the
routing of the call. If BTI is the BellSouth end-user's presubscribed
interexchange carrier or if the BellSouth end user uses BTI as an interexchange
carrier on a 10XXX basis, BellSouth will charge BTI the appropriate tariff
charges for originating network access services. If BellSouth is serving as the
BTI end user's presubscribed interexchange carrier or if the BTI end user uses
BellSouth as an interexchange carrier on a 10XXX basis, BTI will charge
BellSouth the appropriate BellSouth tariff charges for originating network
access services.
IX. NUMBER RESOURCE ARRANGEMENTS
A. Nothing in this Agreement shall be construed to in any manner limit
or otherwise adversely impact either Party's right to request and be assigned
any North American Numbering Plan (NANP) number resources including, but not
limited to, central office (NXX) codes pursuant to the Central Office Code
Assignment Guidelines (last published by the Industry Numbering Committee (INC)
as INC 00-0000-000, Revision 417195, formerly ICCF 93-0729-010), or to
independently, and in a technically compatible manner, establish and publish in
any and all switched telecommunications industry routing and rating databases,
by tariff or otherwise, Rate Centers Rating Points, destination switching
entity/office and routing/tandem information corresponding to such N codes.
B. During any period under this Agreement in which it serves as the
NANP administrator for its territory, BellSouth shall ensure that BTI has
nondiscriminatory access to telephone numbers for assignment to its telephone
exchange service customers, and will assist BTI in applying for NXX codes for
its use in providing local exchange services. BellSouth shall provide numbering
resources pursuant to the Bellcore Guidelines Regarding Number Assignment. BTI
agrees that it will complete the NXX code application in accordance with
24
Industry Carriers Compatibility Forum, Central Office Code Assignment
Guidelines, ICCF 00-0000-000.
C. If during the term of this Agreement BellSouth is no longer the NANP
administrator, the Parties agree to comply with the guidelines, plan or rules
adopted pursuant to 47 U.S.C. ss. 251(e).
D. It shall be the responsibility of each Party to program and update
its switches and network systems pursuant to the local exchange routing guide
(LERG) and other switched telecommunications industry guidelines to recognize
and route traffic to the other Party's assigned NXX codes using that Party's
preferred routing at all times. Neither Party shall impose any fees or charges
whatsoever on the other Party for such activities, except as expressly defined
in this Agreement.
E. Each Party shall be responsible for notifying its customers of any
changes in dialing arrangements due to NPA exhaustion. Neither party shall be
obligated to adopt the specific end user dialing plan of the other.
F. Administration and assignments of numbers will be moved to a neutral
third party in the future. In the interim, while BellSouth is still
administering numbering, the following will apply:
1. BellSouth will assign NXXs to BTI on a nondiscriminatory basis
and on the same basis as to itself.
2. Testing and loading of BTI's NXXs' should be the same as
BellSouth's own.
3. BellSouth shall not discriminate in the allocation of the number
and types of NXXs assigned to BTI.
4. BellSouth will load NXXs according to industry guidelines,
including the terminating LATA in which the NXXs/rate centers are
located.
5. BellSouth will supply BTI with copies of its Local Calling Area
Boundary Guide including all updates thereto.
X. ACCESS TO POLES, DUCTS, CONDUIT AND RIGHTS OF WAY
A. BellSouth agrees to provide to BTI, pursuant to 47 U.S.C. ss. 224,
as amended by the Telecommunications Act nondiscriminatory access to any pole,
duct, conduit, and right-of-way owned or controlled by Xxxx South. The Parties
agree to negotiate in good faith to establish rates, terms and conditions
applicable to BTI's access to poles, ducts, conduit and right-of-way owned and
controlled by BellSouth, and modify, if necessary, existing arrangements
25
by October I, 1996, in a manner consistent with the requirements of the
Telecommunications Act.
XI. ANCILLARY SERVICES AND PLATFORM ARRANGEMENTS
A. 800 Traffic
A.1 BellSouth agrees to compensate BTI, pursuant to BTI's published
originating switched access charges, including the database query charge, for
the origination of 800 and 888 traffic (combined "800") terminated to BellSouth
.
A.2 BTI will provide to BellSouth the appropriate records necessary for
BellSouth to xxxx BellSouth's intraLATA 800 customers. The records provided by
BTI will be in a standard EMR format for a fee paid by BellSouth to BTI, of
$0.015 per record.
A.3 If BTI provides 800 services to its end users during the term of
this Agreement, it agrees to compensate BellSouth, pursuant to BellSouth's
originating switched access charges, including the database query charge, for
the origination of 800 traffic terminated to BTI. BellSouth agrees to provide
BTI the appropriate records for BTI to xxxx its 800 customers. The records
provided will be in a standard EMR format for a fee, paid by BTI to BellSouth,
of $0.015 per record.
A.4 If during the term of this Agreement, BellSouth is permitted to
provide interLATA 800 services, BellSouth will compensate BTI for the
origination of such traffic in accordance with the above.
A.5 If BTI utilizes BellSouth's 800 database for query purposes only,
the rates and charges shall be as set forth in the applicable BellSouth Access
Services Tariff, as said tariff is amended from time to time during the term of
this Agreement.
A.6 Should BTI require 800 access ten digit screening service from
BellSouth, it shall have signaling transfer points connecting directly to
BellSouth's local or signaling transfer point for service control point database
query information. BTI shall utilize SS7 Signaling links, ports and usage from
BellSouth's interstate access services Tariff. 800 access ten digit screening
service is an originating service that is provided via 800 switched access
service trunk groups from BellSouth's SSP equipped end office or access tandem
providing an IXC identification function and delivery of call to the IXC based
on the dialed ten digit number. The rates and charges for said services shall be
as set forth in the applicable BellSouth access services tariff as said tariff
is amended from time to time during the term of this Agreement.
B. 911/E-911
B.1 The Parties agree to interconnect with each other to provide Basic
911 and E-911 emergency calling services consistent with the terms of Attachment
C-9 hereto.
26
B.2 For Basic 911 service, BellSouth will provide to BTI a list
consisting of each municipality in each state that subscribes to Basic 911
service. The list will also provide, if known, the E-911 conversion date for
each municipality and, for network routing purposes, a ten-digit directory
number representing the appropriate emergency answering position for each
municipality subscribing to 911. BTI will arrange to accept 911 calls from its
end users in municipalities that subscribe to Basic 911 service and translate
the 911 call to the appropriate 10-digit directory number as stated on the list
provided by BellSouth. BTI will route that call to BellSouth at the appropriate
tandem or end office . When a municipality converts to E-911 service, BTI shall
discontinue the Basic 91 1 procedures and begin the E-911 procedures, set forth
in subsection B.4 below.
B.3 For E-911 service, BTI shall install a minimum of two dedicated
trunks originating from BTI's serving wire center and terminating to the
appropriate E-911 tandem. The dedicated trunks shall be, at minimum, DSO level
trunks configured either as a 2 wire analog interface or as part of a digital
(1.544 Mb/s) interface. Either configuration shall use CAMA type signaling with
MF pulsing that will deliver automatic number identification (ANI) with the
voice portion of the call. If the user interface is digital, MF pulses, as well
as other AC signals, shall be encoded per the U-255 Law convention. BTI will
provide BellSouth daily updates to the E-911 database.
B.4 If a municipality has converted to E-911 service, BTI will forward
911 calls to the appropriate E-911 tandem, along with ANI, based upon the
current E-911 end office to tandem homing arrangement as provided by BellSouth.
If the E-911 tandem trunks are not available, BTI will alternatively route the
call to a designated 7 digit local number residing in the appropriate PSAP. This
call will be transported over BellSouth's interoffice network and will not carry
the ANI of the calling party.
B.5 BellSouth will provide BTI with an electronic interface from which
BTI may input and update subscriber records in the E-911 database.
BellSouth shall also provide BTI with an automated interface to access
its Automatic Location Identification (ALI) database.
B.6 BellSouth and BTI agree that the practices and procedures contained
in the E-911 Local Exchange Carrier Guide For Facility-Based Providers (LEC
Carrier Guide) shall determine the appropriate procedures and practices of the
Parties as to the provision of 911/E-911 Access. The LEC Carrier Guide shall at
a minimum include, or BellSouth shall separately provide, 911 database update
procedures and 91 1 trunk restoration procedures.
B.7 If BTI requires transport to the BellSouth 911 tandem, BTI may, at
BTI's option, purchase such transport from BellSouth at rates set forth in
either BellSouth's intrastate switched access services tariff or intrastate
special access services tariff.
27
B.8 BellSouth and BTI will cooperatively arrange meetings to answer any
technical questions that municipal or county coordinators may have regarding the
911/E-911 portions of this Agreement.
B.9 Where BellSouth is responsible for maintenance of the E-911
database and can be compensated for maintaining BTI's information by the
municipality, BellSouth shall seek such compensation. BellSouth may seek
compensation for its costs from BTI only if and to the extent BellSouth is
unable to obtain such compensation from the municipality.
B.10 Nothing herein shall be construed to prevent BTI from opting to
route Basic 911 and E-911 calls to an alternative emergency call service bureau,
to provide such services itself, or to route such calls directly to a Public
Safety Answering Point (PSAP).
C. Provision of Operator Services
C.1 BellSouth will offer to BTI Operator Call Processing Access Service
BLV/BLVI Service and Directory Assistance Access Services. Rates, terms and
conditions are set forth in section VI.F for BLV/BLVI Service, Attachment C- 11
for Directory Assistance Access Services, and Attachment C-10 for Operator Call
Processing Access Services. Each such attachment is incorporated herein by this
reference.
C.2 BellSouth also will offer to BTI CMDS Hosting and the Non Sent Paid
Report System pursuant to the terms and conditions set forth in Attachment C-12
and Attachment C-13, incorporated herein by this reference.
D. Transfer of Service Announcements
When an end user customer changes from BellSouth to BTI, or from BTI to
BellSouth, and does not retain its original telephone number, the Party formerly
providing service to the end user will provide a transfer of service
announcement on the abandoned telephone number. Each Party will provide this
referral service at no charge to the other Party. This announcement will provide
details on the new number to be dialed to reach this customer.
E. Coordinated Repair Calls
BTI and BellSouth will employ the following procedures for handling
misdirected repair calls:
E.1 BTI and BellSouth will educate their respective customers as to the
correct telephone numbers to call in order to access their respective repair
bureaus.
E.2 To the extent the correct provider can be determined, misdirected
repair calls will be referred to the proper provider of local exchange service
in a courteous manner, at no charge, and the end user will be provided the
correct contact telephone number. In responding to repair
28
calls, neither Party shall make disparaging remarks about each other, nor shall
they use these repair calls as the basis for internal referrals or to solicit
customers to market services. Either Party shall respond with accurate
information in answering customer questions.
E.3 BTI and BellSouth shall provide their respective repair contact
numbers to one another on a reciprocal basis.
F. Busy Line Verification and Interrupt
1. Description
a. Each Party shall establish procedures whereby its operator
bureau will coordinate with the operator bureau of the other
Party in order to provide Busy Line Verification (BLV) and
Busy Line Verification and Interrupt (BLVI) services on calls
between their respective end users.
b. BTI will route BLV and BLVI traffic to the BellSouth access
tandem.
F.2 Compensation
Each Party shall charge the other Party for BLV and BLVI at the
effective rates contained in BellSouth's applicable Local Interconnection
Services Tariff (s).
G. Directory Assistance (DA)
G.1 Description
At BTI's request, BellSouth will:
a. Provide to BTI, over TOPS trunks, unbranded (or BTI-branded,
where available) directory assistance service which is
comparable in every way to the directory assistance service
BellSouth makes available to interexchange carriers.
b. In conjunction with subparagraph (a) above, provide caller
optional directory assistance call completion service which
is comparable in every way to the directory assistance call
completion service BellSouth generally makes available TO ITS
end users, to the extent BellSouth generally offers such
service TO ITS end users.
c. BellSouth will provide BTI operators on-line access to
BellSouth's DA database.
G.2 Compensation
29
Initial rates, terms and conditions for DA Services shall be as
provided in Attachment C-11 hereto.
H. Directory Listings and Directory Distribution
H.1 Subject to the execution of an agreement between BellSouth's
affiliate, BellSouth Advertising and Publishing Co. (BAPCO), and BTI in a form
substantially similar to that attached as Attachment C-8, (1) BTI's customers'
primary listings shall be included in the appropriate white page (resident and
business) listings or alphabetical directories, as well as the directory
assistance database, (2) BTI's business subscribers' listings will be included
in all appropriate yellow pages or classified directories, and (3) copies of
directories shall be delivered to BTI's customers: all without charge.
H.2 BellSouth shall provide BTI with a magnetic tape or computer disk
containing the proper format to employ in submitting directory listings and
daily updates. BTI shall provide BellSouth with its directory listings and daily
updates to those listings (including new, changed and deleted listings) in a
mutually acceptable format. BellSouth shall include BTI's customers in the
directory assistance database associated with the areas in which BTI provides
exchange services within the same time frame as BellSouth includes its own
customers in such databases.
H.3 BellSouth and its Affiliates will afford BTI's directory listings
information the same level of confidentiality which BellSouth affords its own
directory listing information, and BellSouth shall ensue that access to BTI's
customer proprietary confidential directory information will be limited solely
to those employees who immediately supervise or are directly involved in the
processing and publishing of listings and directory delivery. BellSouth will not
use BTI's directory listings for the marketing of BellSouth's telecommunications
services.
I. Access to Signaling and Signaling Databases
I.1 BellSouth will offer to BTI use of its SS7 signaling network and
signaling databases on an unbundled basis at the rates included in Attachment
C-5 hereto Signaling functionality will be available with both A-link and Blink
connectivity.
I.2 BellSouth agrees to input NXX assigned to BTI into the Local
Exchange Routing Guide (LERG).
I.3 BellSouth will enter BTI line information into its Line Information
Database (LIDB) pursuant to the terms and conditions contained in Attachment C-6
hereto, incorporated herein by this reference. Entry of line information into
LIDB will enable BTI's end users to participate or not participate in alternate
billing arrangements such as collect or third number billed calls.
I.4 BellSouth will provide BTI with access to LIDB for call and card
validation purposes pursuant to an Agreement substantially in the form of
Attachment C-7 hereto, as amended hereafter to include unbundled local loops.
30
I.5 If BTI utilizes BellSouth's 800 database for query purposes only
applicable BellSouth tariffed rates will apply.
XII. TELEPHONE NUMBER PORTABILITY ARRANGEMENTS
A. The Parties agree to provide interim Service Provider Number
Portability (SPNP) on a reciprocal basis between their networks to enable their
end user customers to utilize telephone numbers associated with an Exchange
Service provided by one Party, in conjunction with an Exchange Service provided
by the other Party, upon the coordinated or simultaneous termination of the
first Exchange Service and activation of the second Exchange Service. The
Parties shall provide reciprocal SPNP immediately upon execution of this
Agreement via remote call forwarding (RCF) or Direct Inward Dialing (DID). SPNP
shall operate as follows:
A.1 An end user customer of Party A elects to become an end user
customer of Party B. The end user customer elects to utilize the original
telephone number(s) corresponding to the Exchange Service(s) it previously
received from Party A, in conjunction with the Exchange Service(s) it will now
receive from Party B. Upon receipt of a service order assigning the number to
Party B, Party A will implement an arrangement whereby all calls to the original
telephone number(s) will be forwarded to a new telephone number(s) designated by
Party B within the same access where the original NXX code is used. Party A will
route the forwarded traffic to Party B over the appropriate trunk groups, as if
the call had originated on Party A's network.
A.2 Party B will become the customer of record for the original Party A
telephone numbers subject to the SPNP arrangements. Party A will provide Party B
a single consolidated master billing statement for all collect, calling card,
and third-number billed calls associated with those numbers with subaccount
detail by retained number. Such billing statement shall be delivered via either
electronic data transfer, daily magnetic tape, or monthly magnetic tape (for
which option there shall be no charge). Party A shall provide to Party B the EMR
detail records associated with the calls on the master billing statement.
A.3 Party A will cancel line-based calling cards and will, as directed
by Party B, update its Line Information Database (LIDB) listings for retained
numbers, subject to RCF, and restrict or cancel calling cards associated with
those forwarded numbers, as directed by Party B, subject to execution of an LIDB
storage agreement in substantially the form attached hereto.
A.4 Within two (2) business days of receiving notification from the end
user customer, Party B shall notify Party A of the customer's termination of
service with Party B and shall further notify Party A as to that customer's
instructions regarding its telephone number(s). Party A will reinstate service
to that customer, cancel the SPNP arrangements for that customer's telephone
number(s), or redirect the SPNP arrangement pursuant to the customer's
instructions at that time.
31
B. SPNP-RCF is a telecommunications service whereby a call dialed to an
SPNP-RCF equipped telephone number is automatically forwarded to an assigned
seven or ten digit telephone number, within the local calling area as defined in
Section A3 of the BellSouth General Subscriber Service Tariff. The
forwarded-to-number is specified by BTI or BellSouth, as appropriate. Where
technologically feasible, the forwarding party will provide identification of
the originating telephone number, via SS7 signaling, to the receiving party.
Neither party guarantees, however, identification of the originating telephone
number to the SPNP-RCF end user. SPNP-RCF provides a single call path for the
forwarding of no more than one simultaneous call to the receiving party's
specified forwarded-to number. Additional call paths for the forwarding of
multiple simultaneous calls are available on a per path basis and are in
addition to the rate for SPNP-RCF service.
C. The Parties shall provide RCF arrangements to each other at
identical monthly rates. Recurring charges shall not exceed the actual cost of
providing the service. There shall be no SPNP-RCF non-recurring charges. Until
otherwise verified by reliable cost studies, actual cost for recurring charges
are as stipulated in Attachment D hereto. The Parties agree that Article XXII of
this Agreement shall apply to the rates, terms, and conditions for SPNP-RCF
arrangements.
D. SPNP-DID service provides trunk side access to end office switches
for direct inward dialing to the other Party's premises equipment from the
telecommunications network to lines associated with the other Party's switching
equipment and must be provided on all trunks in a group arranged for inward
service. A SPNP-DID trunk termination provided with SS7 signaling only, applies
for each trunk voice grade equivalent. In addition, direct facilities are
required from the end office where a ported number resides to the end office
serving the ported end user customer. Transport mileage will be calculated as
the airline distance between the end office where the number is ported and the
POI using the V&H coordinate method. SPNP-DID must be established with a minimum
configuration of two channels and one unassigned telephone member per switch,
per arrangement for control purposes. Transport facilities arranged for SPNP-DID
may not be mixed with any other type of trunk group, with no outgoing calls
placed over said facilities. SPNP-DID will be provided only where such
facilities are available and where the switching equipment of the ordering party
is properly equipped. Where SPNP-DID service is required from more than one wire
center or from separate trunk groups within the same wire centers such service
provided from each wire center or each trunk group within the same wire center
shall be considered a separate service. Only customer dialed sent paid calls
will be completed to the first number of a SPNP-DID number group, however, there
are no restrictions on calls completed to other numbers of a SPNP-DID number
group.
E. The Parties hereby agree to negotiate in good faith to establish the
recurring and non-recurring charges, if any, for SPNP-DID. For this purpose
BellSouth shall provide BTI with its relevant cost studies, subject to
applicable non-disclosure obligations. The Parties agree that Article XXII of
this Agreement shall apply to the rates, terms, and conditions of SPNP-DID
arrangements. Until such permanent charges are established the Parties agree
that the rates contained in Attachment E hereof (hereinafter the "Interim
SPNP-DID Rates") will apply.
32
F. Each Party is responsible for obtaining authorization from the end
user for the handling of the disconnection of the end user's service, the
provision of new local service and the provision of SPNP services. Each Party is
responsible for coordinating the provision of service with the other to assure
that its switch is capable of accepting SPNP ported traffic. Each Party is
responsible for providing equipment and facilities that are compatible with the
other's service parameters, interfaces, equipment, and facilities and is
required to provide sufficient terminating facilities and services at the
terminating end of an SPNP call to adequately handle all traffic to that
location and is solely responsible to ensure that its facilities, equipment, and
services do not interfere with or impair any facility, equipment, or service of
the other Party or any of its end users.
G. Each Party is responsible for providing an appropriate intercept
announcement service for any telephone numbers subscribed to SPNP services for
which it is not presently providing local exchange service or terminating to an
end user Where either Party chooses to disconnect or terminate any SPNP service,
that Party is responsible for designating the preferred standard type of
announcement to be provided.
H. Each Party will be the other Party's single point of contact for ad
repair calls on behalf of each Party's end user. Each Party reserves the right
to contact the other Party's customers if deemed necessary for maintenance
purposes.
I. The Parties will migrate from RCF or DID to Permanent Number
Portability (PNP) as soon as practically possible, without interruption of
service (to the degree possible) to their respective customers.
J. Under either an SPNP or PNP arrangement, BTI and BellSouth will
implement a process to coordinate Telephone Numbers Portability (TNP) cut-overs
with Unbundled loop conversions (as described in Section IV of this Agreement).
K. The quality of service of calls to ported numbers should be
identical to the quality of service of the calls to non-ported numbers.
L. If the FCC or a state commission issues regulations pursuant to 47
U.S.C. ss. 251 to require number portability in a manner or at rates different
than that provided pursuant to this subsection, the Parties agree to revise this
Agreement as necessary to fully comply with those requirements.
XIII. DISCONNECTION OF CUSTOMERS
A. BellSouth shall accept any requests from BTI to disconnect the
service of an existing BellSouth end user, except for BellSouth public and
semipublic telephone service which service is subject to effective contracts
with location providers. BellSouth will not require end user confirmation prior
to disconnecting the end user's service. BellSouth will accept a request
directly from an end user for conversion of the end user's service from BTI to
BellSouth or will
33
accept a request from another CLEC for conversion of the SPNP service associated
with an end user's service charge from BTI to the CLEC. BellSouth will notify
BTI that such a request has been processed. This Article shall be subject to
Section 258(a) and (b) of the Telecommunications Act which prohibits illegal
changes of carrier selections and assesses liability for such changes and any
change of service verification procedures which may be promulgated by the FCC.
BTI and BellSouth shall each execute a blanket letter of authorization for each
state substantially in the form attached as Attachment F hereto with respect to
customer disconnections. The Parties shall each be entitled to adopt their own
internal processes for verification of customer authorization of disconnection
of service; provided, however, that such processes shall comply with applicable
state and federal law and until superseded shall be deemed adequate for purposes
of this Agreement if such processes comply with FCC guidelines applicable to
Presubscribed Interexchange Carriers (PIC) changes.
B. If either Party determines that an unauthorized change in local
service provider has occurred, such Party shall reestablish service with the
appropriate local service provider as requested by the end user and will assess
the other Party an Unauthorized Change Charge of $19.41 per line. The
appropriate nonrecurring charges to reestablish the customer's service with the
appropriate local service provider will also be assessed to the other Party
because of the unauthorized change. These charges shall be adjusted if such
Party provides satisfactory proof of authorization.
C. If BellSouth accepts an order placed by itself or another CLEC (or
local reseller) to disconnect the SPNP to an BTI end user, BellSouth shall
notify BTI of the change within three (3) days thereof.
XIV. RESALE OF BELLSOUTH LOCAL EXCHANGE SERVICES
BellSouth hereby agrees that BTI may at any time during the term of
this Agreement elect to resell BellSouth's local exchange services under the
terms and conditions of any local services resale agreement reached between
BellSouth and any other telecommunications carrier. BTI may select any such
resale agreement at any time prior to the expiration of this Agreement.
XV. RESPONSIBILITIES OF THE PARTIES
A. BellSouth and BTI agree to treat each other fairly,
non-discriminatorily and equally for all items included in this Agreement or
related to the support of items included in this Agreement.
B. BTI and BellSouth will work cooperatively to minimize fraud
associated with third-number billed calls, calling card calls, or any other
services related to this Agreement. The Parties fraud minimization procedures
are to be cost effective and implemented so as not to unduly burden or harm one
Party as compared to the other.
34
C. BTI and BellSouth agree to promptly exchange all necessary records
for the proper billing of all traffic.
D. BTI and BellSouth will review engineering requirements on a
quarterly basis and establish forecasts for trunk utilization, POI trunks, MPB
arrangements, E-911, EISCC facility requirements, quantities of DNCF, loops and
other services provided under this Agreement. New trunk groups will be
implemented as dictated by engineering requirements for both BellSouth and BTI.
BellSouth and BTI are required to provide each other the proper call information
(e.g., originated call party number and destination Call party number) to enable
each company to xxxx in a complete and timely manner.
E. The Parties will cooperate by exchanging technical information in
order to identify and explore potential solutions to enable BTI to establish
unique rate centers, or to assign a single NXX code across multiple rate
centers.
F. BTI and BellSouth will work jointly and cooperatively in developing
and implementing common manual and/or electronic interfaces (including, for
example, data elements, data format, and data transmission) from which to place
service orders and trouble reports involving the provision of loops, DNCF,
directory assistance, directory listings, E-91 1, and other services included in
this Agreement. To the extent reasonable, BTI and BellSouth will utilize the
standards established by industry forum, such as OBF.
G. BellSouth will support BTI requests related to central office (N=)
code administration and assignments in an effective and timely manner. BTI and
BellSouth will comply with code administration requirements as prescribed by the
FCC, the state commissions, and accepted industry guidelines.
H. BellSouth shall not impose a cross-connect fee on BTI where BTI
accesses 911 or E-911, reciprocal traffic exchange trunks, and network platform
services, through a collocation arrangement at the BellSouth Wire Center.
I. Notwithstanding any other provision of this Agreement, it is
mutually understood and agreed that both Parties hereto reserve the right to
establish each of the following, consistent with generally accepted industry
standards.
1. Rate centers (location and area within)
2. Points of interchange (including meet points)
3. Switching entity designation and supporting data (including
inbound route choice)
a. end office
b. homing/homed to tandem
35
4. Association of routing point(s) with end offices, POIs, etc.
5. Published rate center and locality designations.
XVI. NETWORK DESIGN AND MANAGEMENT
A. The Parties agree to work cooperatively to install and maintain
reliable interconnected telecommunications networks, including but not limited
to, maintenance contact numbers and escalation procedures. BellSouth agrees to
provide public notice of changes in the information necessary for the
transmission and routing of services using its local exchange facilities or
networks, as well as of any other changes that would affect the interoperability
of those facilities and networks.
B. The interconnection of all networks will be based upon accepted
industry/national guidelines for transmission standards and traffic blocking
criteria.
C. The Parties will work cooperatively to apply sound network
management principles by invoking appropriate network management controls to
alleviate or prevent network congestion.
D. For network expansion, the Parties agree to review engineering
requirements on a quarterly basis and establish forecasts for trunk utilization.
New trunk groups will be added as reasonably warranted.
E. BTI and BellSouth will exchange appropriate information (e.g.,
maintenance contact numbers, network intonation, information required to comply
with law enforcement and other security agencies of the Government) to achieve
desired reliability. In addition, BTI and BellSouth will cooperatively plan and
implement coordinated repair procedures to ensure customer trouble reports are
resolved in a timely and appropriate manner.
XVII. TERM
A. The term of this Agreement shall be two years, beginning
January 2, 1997.
B. The Parties agree that by no later than January 2, 1998, they shall
commence negotiations with regard to the terms, conditions, and prices of local
interconnection to be effective beginning January 2, 1999.
C. If, within 90 days of commencing the negotiation referred to in
Section XVII.B above, the Parties are unable to satisfactorily negotiate new
local interconnection terms, conditions, and prices, either Party may petition
the state commission to establish appropriate local interconnection arrangements
pursuant to 47 U.S.C. 252. The Parties agree that, in such event, they shall
encourage the Commission to issue its order regarding the appropriate local
interconnection arrangements no later than July 1, 1998. The Parties further
agree that in the
36
event the Commission does not issue its order prior to July 1, 1998 or if the
Parties continue beyond January 2, 1999 to negotiate the local interconnection
arrangements without Commission intervention, the terms, conditions, and prices
ultimately ordered by the Commission, or negotiated by the Parties, will be
effective retroactive to January 2, 1999. Until the revised local
interconnection arrangements become effective, the Parties shall continue to
exchange traffic pursuant to the terms and conditions of this Agreement.
D. The Parties agree that (I ) if the FCC or a state commission or
other state or local body having jurisdiction over the subject manner of this
Agreement finds that the terms of this Agreement are inconsistent in one or more
material respects with any of its or their respective decisions, rules, or
regulations promulgated, or (2) if an FCC or state commission order or
requirement has the effect of preempting any term of this Agreement, then in the
event of the occurrence of (1) or (2) the Parties shall immediately commence
good faith negotiations to conform this Agreement with any such decision, rule
regulation or preemption. The revised agreement shall have an effective date
that coincides with the effective date of the original FCC or state commission
action giving rise to such negotiations. The Parties agree that the rates terms
and conditions of any new agreement shall not be applied retroactively to any
period prior to such effective date.
XVIII. IMPLEMENTATION OF AGREEMENT
The Parties agree that within 30 days of the execution of this
Agreement they will adopt a schedule for the implementation of this Agreement.
The schedule shall state with specificity, ordering, testing, and full
operational time frames. The implementation shall be attached to this Agreement
as an addendum and specifically incorporated herein by this reference.
XIX. UNIVERSAL SERVICE
The Parties acknowledge that BellSouth will guarantee the provision of
universal service as the carrier-of-last-resort throughout its territory in
Florida until January 1, 1998 without contribution from BTI.
XX. FORCE MAJEURE
Neither Party shall be responsible for delays or failures in
performance resulting from acts or occurrences beyond the reasonable control of
such Party, regardless of whether such delays or failures in performance were
foreseen or foreseeable as of the date of this Agreement including, without
limitation: fire, explosion, power failure, acts of God, war, revolution, civil
commotion, or acts of public enemies; any law, order, regulation, ordinance or
requirement of any government or legal body; or labor unrest, including, without
limitation strikes, slowdowns, picketing, or boycotts; or delays caused by the
other Party or by other service or equipment vendors; or any other circumstances
beyond the Party's reasonable control. In such event
37
the Party affected shall, upon giving prompt notice to the other Party, be
excused from such performance on a day-today basis to the extent of such
interference (and the other Party shall likewise be excused from performance of
its obligations on a day-for-day basis to the extent such Party's obligations
relate to the performance so interfered with). The affected Party shall use its
best efforts to avoid or remove the cause of nonperformance and both Parties
shall proceed to perform with dispatch once the causes are removed or cease.
XXI. LIABILITY AND INDEMNIFICATION
A. Liability Cap
1. With respect to any claim or suit, whether based in contract,
tort or any other theory of legal liability, by BTI, any BTI
customer or by any other person or entity, for damages associated
with any of the services provided by BellSouth pursuant to or in
connection with this Agreement, including but not limited to the
installation, provision, preemption, termination, maintenance,
repair or restoration of service, and subject to the provisions
of the remainder of this Article, BellSouth's liability shall be
limited to an amount equal to the proportionate charge for the
service provided pursuant to this Agreement for the period during
which the service was affected. Notwithstanding the foregoing,
claims for damages by BTI, any BTI customer or any other person
or entity resulting from the gross negligence or willful
misconduct of BellSouth and claims for damages by BTI resulting
from the failure of BellSouth to honor in one or more material
respects any one or more of the material provisions of this
Agreement shall not be subject to such limitation of liability.
2. With respect to any claim or suit, whether based in contract,
tort or any other theory of legal liability, by BellSouth, any
BellSouth customer or by any other person or entity, for damages
associated with any of the services provided by BTI pursuant to
or in connection with this Agreement, including but not limited
to the installation, provision, preemption, termination,
maintenance, repair or restoration of service, and subject to the
provisions of the remainder of this Article, BTI's liability
shall be limited to an amount equal to the proportionate charge
for the service provided pursuant to this Agreement for the
period during which the service was affected. Notwithstanding the
foregoing, claims for damages by BellSouth, any BellSouth
customer or any other person or entity resulting from the gross
negligence or willful misconduct of BTI and claims for damages by
BellSouth resulting from the failure of BTI to honor in one or
more material respects any one or more of the material provisions
of this Agreement shall not be subject to such limitation of
liability.
38
B. Neither Party shall be liable for any act or omission of any other
telecommunications company to the extent such other telecommunications company
provides a portion of a service.
C. Neither Party shall be liable for damages to the other Party's
terminal location, POI or the other Party's customers' premises resulting from
the furnishing of a service, including but not limited to the installation and
removal of equipment and associated wiring, except to the extent the damage is
caused by such Party's gross negligence or willful misconduct.
D. Notwithstanding subsection A, the Party providing services under
this Agreement, its affiliates and its parent company shall be indemnified,
defended and held harmless by the Party receiving such services against any
claim, loss, or damage arising from the receiving Party's use of the services
provided under this Agreement, involving: (1) claims for libel, slander,
invasion of privacy, or copyright infringement arising from the content of the
receiving Party's own communications; (2) any claim, loss, or damage claimed by
the receiving Party's customer(s) arising from such customer's use of any
service including 911/E-911 that the customer has obtained from the receiving
Party and that the receiving Party has obtained from the supplying Party under
this Agreement or; (3) all other claims arising out of an act or omission of the
receiving Party in the course of using services provided pursuant to this
Agreement. Notwithstanding the foregoing to the extent that a claim, loss, or
damage is caused by the gross negligence or willful misconduct of a supplying
Party, the receiving Party shall have no obligation to indemnify, defined and
hold harmless the supplying Party hereunder.
E . Neither Party guarantees or makes any warranty with respect to its
services when used in an explosive atmosphere. Notwithstanding subsection A,
each Party shall be indemnified, defended and held harmless by the other Party
or the other Party's customer from any and all claims by any person relating to
the other Party or the other Party's customer's use of services so provided.
F. No license under patents (other than the limited license to use in
the course of using a service provided pursuant to this Agreement) is granted by
one Party to the other or shall be implied or arise by estoppel, with respect to
any service offered pursuant to this Agreement. Notwithstanding subsection A,
the Party providing a service pursuant to this Agreement will defend the Party
receiving such service against claims of patent infringement arising solely from
the use by the receiving Party of such service and will indemnify the receiving
Party for any damages awarded based solely on such claims. Such indemnification
shall not, however, extend to claims for patent infringement to the extent the
alleged infringement results from:
1. Modification of the service by someone other than the providing
Party and/or its subcontractors, where there would be no such
infringement or violation in the absence of such modification; or
2. The combination, operation, or use of the service with any
product, data or apparatus not provided by the providing Party
and/or its subcontractors, where there would be no such
infringement or
39
violation in the absence of such combination, operation or use.
G. Promptly after receipt of notice of any claim or the commencement of
any action for which a Party may seek indemnification pursuant to this Article
XXI, such Party (Indemnified Party) shall promptly give written notice to the
other Party (the Indemnifying Party) of such claim or action, but the failure to
so notify the Indemnifying Party shall not relieve the Indemnified Party of any
liability it may have to the Indemnified Party except to the extent the
Indemnifying Party has actually been prejudiced thereby. The Indemnifying Party
shall be obligated to assume the defense of such claim, at its own expense. The
Indemnified Party shall cooperate with the Indemnifying Party's reasonable
requests for assistance or Information relating to such claim, at the
Indemnifying Party's expense. The Indemnified Party shall have the right to
participate in the investigation and defense of such claim or action, with
separate counsel chosen and paid for by the Indemnified Party.
XXII. DEFAULT
If either Party defaults in the payments of any amount due hereunder,
or if either Party violates any other provision of this Agreement, and such
default or violation shall continue for thirty (30) days after written notice
thereof, the other Party may terminate this Agreement forthwith by written
instrument. The failure of either Party to enforce any of the provisions of this
Agreement or the waiver thereof in any instance shall not be construed as a
general waiver or relinquishment of its part of any such provision, but the same
shall, nevertheless, be and remain in full force and effect.
XXIII. NONDISCLOSURE
A. All information, including but not limited to specifications,
microfilm, photocopies, magnetic disks, magnetic tapes, drawings, sketches,
models, samples, tools, technical information, data, employee records, maps,
financial reports, and market data, (i) furnished by one Party to the other
Party dealing with customer specific, facility specific, or usage specific
information, other than customer information communicated for the purpose of
publication or directory database inclusion, or (ii) in written, graphic,
electromagnetic, or other tangible form and market at the time of delivery as
"Confidential" or "Proprietary," or (iii) communicated orally and declared to
the receiving Party within ten ( 10) days after delivery, to be "Confidential"
or "Proprietary" (collectively referred to as "Proprietary Information"), shall
remain the property of the disclosing Party.
B. Upon request by the disclosing Party, the receiving Party shall
return all tangible copies of Proprietary Information, whether written, graphic
or otherwise, except that the receiving Party may retain one copy for archival
purposes.
C. Each Party shall keep all of the other Party's Proprietary
Information confidential and shall use the other Party's Proprietary Information
only for performing the covenants
40
"contained in the Agreement. Neither Party shall use the other Party's
Proprietary Information for any other purpose except upon such terms and
conditions as may be agreed upon between the Parties in writing.
D. Unless otherwise agreed, the obligations of confidentiality and
non-use set forth in this Agreement do not apply to such Proprietary Information
as:
1. was at the time of receipt already known to the receiving Party
free of any obligation to keep it confidential evidenced by
written records prepared prior to delivery by the disclosing
Party; or
2. is or becomes publicly known through no wrongful act of the
receiving Party; or
3. is rightfully received from a third person having no direct or
indirect secrecy or confidentially obligated to the disclosing
Party with respect to such information; or
4. is independently developed by an employee, agent, or contractor
of the receiving Party which individual is not involved in any
manner with the provision of services pursuant to the Agreement
and does not have any direct or indirect access to the
Proprietary Information; or
5. is disclosed to a third person by the disclosing Party without
similar restrictions on such third person's rights; or
6. is approved for release by written authorization of the
disclosing Party; or
7. is required to be made public by the receiving Party pursuant to
applicable law or regulation provided that the receiving Party
shall give sufficient notice of the requirement to the disclosing
Party to enable the disclosing Party to seek protective orders.
E. Effective Date. Notwithstanding any other provision of this
Agreement, the Proprietary Information provisions of this Agreement shall apply
to all information furnished by either Party to the other in furtherance of the
purpose of this Agreement, even if furnished before the date of this Agreement.
The obligation to that information as confidential shall survive the termination
of this Agreement.
XXIV. ARBITRATION
A. Any controversy or claim arising out of, or relating to, this
Contract or the breach thereof shall be settled by arbitration, in accordance
with the rules then obtaining, of the American Arbitration Association, and
judgment upon the award rendered may by entered in any court having jurisdiction
of the controversy or claim. As an express condition precedent to any
41
legal or equitable action or proceeding in the event of disputes or
controversies as to the amount of loss or damage arising out of this Contract,
such disputes or controversies shall first be submitted to the arbitration of
two persons, one chosen by each Party, who shall jointly select a third person.
Provided, however, that nothing contained herein shall preclude either Party
from filing any complaint or other request for action or relief with the FCC or
the appropriate state commission, including any appeals thereof. The Party which
does not prevail shall pay all reasonable costs of the arbitration or other
formal complaint proceeding, including reasonable attorney's fees and other
legal expenses of the prevailing Party.
B. Nothing herein shall preclude BTI from seeking state commission
arbitration, pursuant to Section 252 of the Telecommunications Act, of issues
upon which the Parties hereto were unable to reach agreement during the
negotiations hereof. The Parties acknowledge that they were unable to reach
agreement on the rates applicable to unbundled local loops, associated cross
connections, local loop multiplexing and switch ports, and that these issues
will be submitted for resolution by the state commissions through arbitration.
BellSouth hereby waives any right to contest BTI's ability to seek state
commission and/or FCC review of such unresolved issues.
XXV. WAIVERS
Any failure by either Party to insist upon the strict performance by
the other Party of any of the provisions of this Agreement shall not be deemed a
waiver of any of the provisions of this Agreement, and each Party,
notwithstanding such failure, shall have the right thereafter to insist upon the
specific performance of any and all of the provisions of this Agreement.
XXVI. GOVERNING LAW
This Agreement shall be governed by, construed and enforced in
accordance with applicable federal law and the laws of the State in which the
arrangements are implemented.
XXVII. ARM'S LENGTH NEGOTIATIONS
This Agreement was executed after arm's length negotiations between the
undersigned Parties and reflects the conclusion of the undersigned that this
Agreement is in the best interests of all Parties.
XXIII. NOTICES
Any notices required by or concerning this Agreement shall be sent via
facsimile and overnight courier to the Parties at the addresses shown below:
42
Xxxxxxx Xxxxxxxx
Vice President & General Counsel
BTI Telecom, Inc.
0000 Xxx Xxxxx Xxxx, Xxxxx 000
Xxxxxxx, Xxxxx Xxxxxxxx 00000
CLEC Account Manager
BellSouth Telecommunications, Inc.
Xxxxx X0X0
0000 Xxxxxxxxx Xxxxxxx
Xxxxxxxxxx, Xxxxxxx 00000
Each Party shall inform the other of any changes in the above addresses.
XXIX. ENTIRE AGREEMENT
This Agreement and its Attachments, incorporated herein by this
reference, set forth the entire understanding and supersedes prior agreements
between the Parties relating to the subject matter contained herein and merges
all prior discussions between them, and neither Party shall be bound by any
definition, condition, provision, representation, warranty, covenant or promise
other than as expressly stated in this Agreement or as is contemporaneously or
subsequently set forth in writing and executed by a duly authorized officer or
representative of the Party to be bound thereby.
XXX. COUNTERPARTS
This Agreement may be executed in any number of counterparts, each of
which when executed and delivered shall be deemed an original and all such
counterparts shall constitute one and the same instrument. Signatures
transmitted by the Parties by facsimile shall have the same effect as original
signatures as of the date transmitted by the executing Party.
Signatures on Following Page
43
IN WITNESS WHEREOF, the Parties hereto have caused this Agreement to be
executed by their respective duly authorized representatives.
BUSINESS TELECOM, INC. BELLSOUTH TELECOMMUNICATIONS, INC.
By:______________________________________ By:________________________________
Xxxxxxx Xxxxxxxx / Vice President Xxxxx Xxxxxxx / Director
General Counsel
Date:____________________________________ Date:______________________________
