1
EXHIBIT 10.16
EXECUTION COPY
FIBER PRODUCT PURCHASE AGREEMENT
by and between
LUCENT TECHNOLOGIES INC.
and
AGERE SYSTEMS INC.
Dated as of February 1, 2001
2
FIBER PRODUCT PURCHASE AGREEMENT
THIS FIBER PRODUCT PURCHASE AGREEMENT (this "Agreement"), effective as of
February 1, 2001 (the "Effective Date"), is by and between Lucent Technologies
Inc., a Delaware corporation, with offices at 000 Xxxxxxxx Xxxxxx, Xxxxxx Xxxx,
Xxx Xxxxxx 00000 ("Lucent"), and Agere Systems Inc., a Delaware corporation,
with offices at 000 Xxxxx Xxxx., Xxxxxxxxx, Xxxxxxxxxxxx 00000 ("Customer").
R E C I T A L S
A. WHEREAS, the Board of Directors of Lucent has determined that it is in
the best interests of Lucent and its stockholders to separate Lucent's existing
businesses into two independent businesses;
B. WHEREAS, in furtherance of the foregoing separation, Lucent and Customer
desire to enter into this Agreement to provide for certain commercial
transactions between the parties as described in Section 3, Scope of the
Agreement, of this Agreement;
NOW, THEREFORE, in consideration of the premises and for other good and
valid consideration, the receipt and sufficiency of which are hereby
acknowledged, the parties, intending to be legally bound, agree as follows:
1. DEFINITIONS
For the purposes of this Agreement, in addition to the words and phrases
that are defined throughout the body of this Agreement, the following words and
phrases shall have the following meanings:
"Affiliate" of any Person means a Person that controls, is controlled by,
or is under common control with such Person. As used herein, "control" means the
possession, directly or indirectly, of the power to direct or cause the
direction of the management and policies of such entity, whether through
ownership of voting securities or other interests, by contract or otherwise.
"Confidential Information" means all nonpublic information in whatever
form, including, without limitation, specifications (excluding data sheets and
product information generally made available to customers), drawings,
documentation, know-how, pricing, and licensed materials, which may be disclosed
by either party to the other party and which bears a legend or notice regarding
its proprietary or confidential nature or, if not in tangible form, which the
disclosing party describes as proprietary or confidential at the time of
disclosure and subsequently sends a written summary to the receiving party
within thirty (30) days of disclosure.
"Firmware" means a combination of (1) hardware and (2) Software represented
by a pattern of bits contained in such hardware.
3
"Governmental Authority" means any federal, state, local, foreign or
international court, government, department, commission, board, bureau, agency,
official or other regulatory, administrative or governmental authority.
"OEM Customer" is defined as a customer who purchases components and/or
assemblies from Customer which components and/or assemblies incorporate one or
more of the Products into a finished product manufactured by such customer.
"Order" means a written (paper or electronic) purchase order issued by
Customer to Lucent, which refers to this Agreement and any firm price quotation
and specifies (i) the quantity and type of Products being ordered and their
applicable prices, charges or fees; (ii) accurate "ship to" and "xxxx to"
addresses; and (iii) the requested delivery date consistent with Lucent's
standard interval between acceptance of an Order and delivery. An electronic
Order shall be effective despite the absence of Customer's signature.
"Person" means an individual, a general or limited partnership, a
corporation, a trust, a joint venture, an unincorporated organization, a limited
liability entity, any other entity and any Governmental Authority.
"Product" means the Specialty Fiber Products and Fiber Optic Apparatus
identified in Schedule 3 hereto and such other Specialty Fiber Products and
Fiber Optic Apparatus as the parties may add by written agreement from time to
time, but does not include Software, Firmware or Services.
"Services" means engineering, installation, consulting or other services.
"Software" means a computer program, in machine-readable or object-code
form, consisting of a set of logical instructions and tables of information that
guide the functioning of a processor. Such program may be contained in any
medium whatsoever, including Firmware, representing such program, but does not
include such medium.
"Specifications" means Lucent's or its vendor's written technical
specifications for a particular Product furnished under this Agreement.
2. TERM
The term of this Agreement shall commence on the Effective Date and shall
expire on January 31, 2004, unless earlier terminated in accordance with the
provisions hereof (the "Term"). The Term may be extended for additional one (1)
year periods upon the mutual written agreement of the parties. The rights and
obligations of the parties which by their nature would continue beyond the
termination, cancellation, or expiration of this Agreement, shall survive such
termination, cancellation or expiration.
2
4
3. SCOPE OF THE AGREEMENT
(a) This Agreement covers the sale to Customer and its Affiliates by Lucent
and its Affiliates of Products listed in Schedule 3 for the sole purpose of
incorporation into finished products to be sold by Customer to OEM Customers.
Customer will not resell the Products independent from and separate from the
finished products referred to in the previous sentence.
(b) The only Products covered by this Agreement are those (a) listed on
Schedule 3, or (b) offered by Lucent to Customer under this Agreement by written
notice. Customer may purchase other product of a similar merchandise class code
to that set forth in Schedule 3 from Lucent's catalog (print or electronic) at
Lucent's standard customer price.
(c) If during the term of this Agreement, Lucent introduces and makes
generally available in the marketplace similar product to that purchased
hereunder, Lucent will offer to Customer the right to purchase such new product.
Lucent's offer will be in writing and will contain a full description of the
terms on which the product is to be delivered. To accept the offer, Customer
must deliver to Lucent written notice of acceptance within thirty (30) days
after Customer receives the offer. If Customer accepts Lucent's offer, Customer
will purchase the product on the terms accepted.
(d) The relationship of the parties under this Agreement shall be, and at
all times remain, one of independent contractors and not that of franchiser and
franchisee, joint venturers, or principal and agent. Neither party shall have
any authority to assume or create obligations on the other's behalf with respect
to such Products, and neither party shall take any action which has the effect
of creating the appearance of its having such authority.
(e) Neither party is, or shall hold itself out to be, the representative of
the other. Customer shall market components and/or assemblies that incorporate
the Products to OEM Customers on such terms and conditions as Customer chooses,
provided Customer does not violate this Agreement.
(f) The provisions of this Agreement are solely for the benefit of the
parties and are not intended to confer upon any Person except the parties any
rights or remedies hereunder, and there are no third party beneficiaries of this
Agreement, and this Agreement shall not provide any third Person with any
remedy, claim, liability, reimbursement, claim of action or other right in
addition to those existing without reference to this Agreement.
(g) All persons furnished by Customer shall be considered solely Customer's
employees or agents, and Customer shall be responsible for payment of all
unemployment, Social Security and other payroll taxes including contributions
from them when required by law.
3
5
4. EXPORT
The parties acknowledge that any Products, software, and technical information
(including, but not limited to, Services and training) provided under this
Agreement are subject to U.S. export laws and regulations and any use or
transfer of such Products, software, and technical information must be
authorized under those laws and regulations. The parties agree that they will
not use, distribute, transfer, or transmit the Products, software, or technical
information (even if incorporated into other products) except in compliance with
U.S. export regulations. If requested by Lucent, Customer also agrees to sign
written assurances and other export-related documents as may be required for
Lucent to comply with U.S. export regulations.
5. ORDERS; CHANGES TO ORDERS; ACCEPTANCE; CANCELLATION OF ORDERS;
INTERNATIONAL ORDERS
(a) All purchases under this Agreement shall be made by Orders issued by
Customer from time to time and accepted or rejected by Lucent in writing. Each
Order shall reference this Agreement and shall be subject only to the terms and
conditions of this Agreement. Terms and conditions on an Order which are
inconsistent with this Agreement, and any pre-printed terms and conditions on an
Order, shall be ineffective and void unless otherwise agreed in writing by the
Parties.
(b) All Purchase Orders shall contain the information necessary for Lucent
to fulfill the Order. Such information shall include:
(i) A reference to this Agreement;
(ii) An Order date and a purchase Order number;
(iii) The address to which Products are to be delivered and the
address to which Lucent's invoice is to be sent and;
(iv) A description of the Products ordered, including but not limited
to, the comcode.
(c) Customer shall forward Purchase Orders to the following address or such
address as Lucent may direct by written notice to Customer:
(i) For Specialty Fibers - Somerset products identified in Schedule
3.1, Orders shall
4
6
be forwarded to:
Lucent Technologies
Customer Service
00000 X. Xxxxx Xxxxx Xxxx, Xxxxx 000
Xxxxxxxxxxxx, XX 00000
Phone: (000) 000-0000
Fax: (000) 000-0000
(ii) For Specialty Fiber - Avon CT products identified in Schedule
3.2, Orders shall be forwarded to:
Lucent Specialty Fiber Technologies
Customer Service
00 Xxxxxxx Xxxxx
XX Xxx 0000
Xxxx, XX 00000
Phone: (000) 000-0000
Fax: (000) 000-0000
(iii) For FOA Products identified in Schedule 3.3, Orders shall be
forwarded to:
Lucent Technologies
Customer Service
00000 X. Xxxxx Xxxxx Xxxx, Xxxxx 000
Xxxxxxxxxxxx, XX 00000
Phone: (000) 000-0000
Fax: (000) 000-0000
(d) Customer may request changes to an Order ("Change Request") that Lucent
has previously accepted. In response to a Change Request, Lucent will provide
written quotations, including any changes to prices, license fees, shipment or
completion dates. A Change Request will be treated as a separate Order subject
to Lucent's change order process.
(e) Products on any purchase Order may not be canceled after delivery by
Lucent to a carrier for shipment to Customer. For those Products in Schedule 3
not subject to Section 6 of this Agreement, Lucent may invoice Customer for all
charges and costs incurred by reason of cancellation within the lead time and
prior to delivery by Lucent to a carrier for shipment to Customer.
(f) Customer and any of its Affiliates in the United States may place or
enter into Orders under this Agreement for the purchase of Products in the
United States. In the event that
5
7
Customer wants to procure Products outside the United States, Orders for Product
shall be placed on the appropriate Lucent Affiliate, and the following procedure
shall apply. As used herein, "Lucent" refers to the particular Lucent entity
accepting the Order.
(i) Prior to submitting or entering into an Order under this Agreement,
the non-U.S. Customer Affiliate and the relevant Lucent Affiliate shall
sign a Letter of Acceptance ("LOA") in substantially the form set forth in
Schedule 5 committing them to utilize the terms and conditions of this
Agreement in any forthcoming procurement of Products in their location,
subject to any modified, additional, or deleted terms as set forth in the
LOA. Each LOA shall state the Lucent Affiliate, the non-U.S. Customer
Affiliate, the applicable Products, and the geographical area to which it
applies. Each LOA will incorporate by reference the master terms and
conditions of this Agreement and will specify any agreed upon changes
required by local law or local operational practice. Such additional terms
may include, but shall not be limited to delivery terms, passage of title,
or choice of law. Notwithstanding the foregoing, any pricing terms shall
continue to be subject to Section 7, Favored Customer Pricing. The Parties
intend that the terms and conditions of the Agreement shall apply, except
with respect to those mutually agreed upon provisions which are required to
address (1) local laws/regulations or (2) operational issues resulting from
transacting in the particular country identified in the relevant LOA. Each
LOA shall be deemed a separate contract between the parties who sign it,
and each party identified in such LOA shall look only to the other for
performance of their respective obligations under such LOA and any Order
placed pursuant to it. Once an LOA has been executed by the relevant
parties, multiple Orders may be placed under such LOA.
(ii) For deliveries outside of the United States only, should there be
a conflict between the terms and conditions of an LOA and this Agreement,
the terms of the LOA shall prevail. Once an LOA for a specific geographic
area is executed by both parties, Orders may be placed under the LOA
following the procedures set forth herein (unless modified or amended by
the relevant LOA).
6. FORECAST; CUSTOMER'S PURCHASE COMMITMENT; INVENTORY; LUCENT'S COMMITMENT
The provisions of this Section 6 shall apply solely to the Specialty Fiber
Products described in Schedules 3.1 and 3.2 and any custom Product added to
Schedule 3.3. The commitment described in this Section 6 shall be referred to as
the "Purchase Commitment."
(a) Customer shall:
(i) Provide Lucent with an initial twelve (12) month rolling forecast
of Product requirements within four (4) weeks of the Effective Date of this
Agreement. Lucent shall notify Customer if it cannot reasonably meet the
initial forecast and the Parties shall meet and negotiate in good faith to
resolve any disagreements as to the initial forecast. Thereafter, Customer
shall update the forecast weekly. Any increase in the forecast shall not
exceed the reserve capacity specified in Schedule 3. If no such reserve
capacity is specified and Lucent
6
8
reasonably believes it cannot meet the increased forecast, the Parties
shall meet to agree on an acceptable forecast.
(ii) The first twelve (12) weeks of each such updated weekly forecast
shall be considered a binding commitment ("Binding Commitment") on the part
of Customer and Customer shall be committed to spend the total dollar
volume of each such rolling twelve week forecast. Customer may not alter
the mix of specific Products forecast for the first four (4) weeks of each
updated twelve week forecast absent agreement by Lucent. The remaining
eight (8) weeks shall be a Binding Commitment on the part of Customer;
provided, however, Customer may alter the mix of forecasted Products within
Product groups (as such Product groups are identified in Schedules 3.1 and
3.2 or any custom Product added to Schedule 3.3) in subsequent weekly
updates.
(iii) During the Term, directly procure from Lucent no less than its
total requirements for Products in Schedule 3.1 or compensate Lucent as
described in Section 6, Subsection (e). The Parties shall confer from time
to time and when the Parties agree production capacity for the Products
described in Schedule 3.2 are sufficient to meet such requirements,
Customer shall thereafter procure from Lucent no less than its total
requirements for Products in Schedule 3.2 or compensate Lucent as described
in Section 6, Subsection (e). In addition, Customer agrees to provide
Lucent the right of first refusal on any additional products similar to the
Products herein that it requires during the Term.
(b) Lucent shall:
(i) Invest in capital and resources to fully support the forecast as
Lucent in its sole discretion deems reasonably necessary.
(ii) Maintain sufficient floor space, labor resources and
material/component part supply (including effective buffer stocking) to
support Product demand as described in Schedules 3.1 and 3.2 and any custom
Product added to Schedule 3.3.
(iii) Adhere to the forecast or a subsequent scheduling mechanism, if
enacted, or be responsible for compensating Customer as described in
Section 6, Subsection (f).
(iv) Provide Customer's Materials Manager with weekly advanced delivery
commitments for the following four (4) week period.
(v) Provide Customer with early warning notification for all delivery
shortages at the time the impacting circumstances are identified, and to
follow such occurrence with an initial delivery recovery response within
forty-eight (48) hours.
(vi) Maintain an inventory buffer stock as defined in Schedule 3.1.
7
9
(c) Customer and Lucent agree to meet at least four (4) times per year to
reconcile any discrepancies of past deliveries per this Agreement and to
re-establish the demand for the remainder of the twelve (12) month period.
(d) Procurement Shortfall - Exclusive Remedies. Should Customer's purchases
fall short of the Binding Commitment referenced in Section 6(a)(ii)
("Procurement Shortfall"), then Customer's entire liability and Lucent's
exclusive remedy against Customer shall be that Customer agrees to procure one
hundred percent (100%) of the Product units acknowledged in the Binding
Commitment. In cases where another agreement between Customer and Lucent has
been or will be negotiated, prices will be in accordance with the negotiated
agreement. Upon termination of an Order by Customer outside the Binding
Commitment, Lucent will immediately: (i) cease work; (ii) prepare and submit to
Customer an itemization of all completed and partially completed Products; (iii)
deliver to Customer Products satisfactorily completed up to the date of
termination at the agreed upon prices in the relevant Order; and (iv) deliver
upon request any work in process. In the event Customer terminates an Order
outside the Binding Commitment, Customer shall compensate Lucent for the actual
and reasonable expenses incurred by Lucent for work in process up to and
including the date of termination provided Lucent uses reasonable efforts to
mitigate Customer's liability under this Subsection by, among other actions,
accepting the return of, returning to its suppliers, selling to others, or
otherwise using the canceled Products (including raw materials or work in
process) and provided such expenses do not exceed the prices agreed to in the
relevant Order. If requested by the Customer, Lucent will substantiate the
incurred costs for work in process and the purchase price of raw materials and
components with proof reasonably satisfactory to Customer. Upon any termination
of an Order, the parties shall meet promptly to determine the finished Product,
work in process, components, and raw materials for which Customer is responsible
as set forth above. Upon the parties agreeing on the amount of Customer's
liability for termination hereunder, Lucent shall, at Customer's option and
expense, ship to Customer or scrap such finished Product, work in process and
raw materials and components for which Customer is liable under this section.
(e) Requirements Shortfall - Exclusive Remedies. Should Customer's
purchases fall short of the Customer's total requirements as referenced in
Section 6(a)(iii) or result from procurement for which Lucent was not given the
right of first refusal ("Requirements Shortfall"), then Customer's entire
liability and Lucent's exclusive remedy against Customer shall be that Customer
agrees to pay a sum equal to the number of units procured from other sources
multiplied by Lucent's price for the substantially same Product. In cases where
another agreement between Customer and Lucent has been or will be negotiated,
prices will be in accordance with the negotiated agreement.
(f) Delivery Shortfall - Exclusive Remedies
(i) Customer shall monitor delivery to consignment demand.
8
10
(ii) Lucent's entire liability and Customer's exclusive remedies
against Lucent for any damages caused by or arising from failure to deliver
or delays in delivery of weekly requirements ("delivery shortfall") shall
be:
(x) If Lucent fails to deliver between ten percent (10%) and
twenty percent (20%) of any Product per quarterly requirements, then
Lucent shall credit Customer with a five percent (5%) price reduction
for the Product delivered.
(y) If Lucent fails to deliver twenty percent (20%) or more of any
Product per quarterly requirements, then Lucent shall credit Customer
with a ten percent (10%) price reduction for the Product delivered.
(iii) Customer shall assess credits and compensations, resulting from
Lucent's failure to deliver, during quarterly reviews. Lucent shall apply
the assessed credit or pay the assessed compensation to Customer within
four (4) weeks of assessment.
(iv) To the extent that any percent price reduction or assessed credit
cannot be satisfied, Lucent will pay Customer the amount that cannot be
deducted from the amount is assessed.
(g) In the event this Agreement is terminated prior to the completion of
the Term, Customer shall be obligated to pay for any outstanding Purchase
Commitment not satisfied prior to the effective date of such termination. The
provisions of this Section 6 shall survive the expiration or earlier termination
of this Agreement.
7. FAVORED CUSTOMER PRICING
The provisions of this Section 7 shall apply solely to the Specialty Fiber
Products described in Schedules 3.1 and 3.2 and any custom Product added to
Schedule 3.3.
Provided Customer purchases and pays for the committed volumes set forth in
this Agreement, the price to Customer for each Product (as determined by the
comcode) during a calendar year will be no less favorable (taking into account
the terms and conditions to other customers) than the price Lucent charges to
its other customers in the same country (other than Lucent distributors or VARs,
or Lucent internal customers, either directly or through their contract
manufacturers; and special pricing associated with one time product promotional
sales and special inventory clearances) which purchase the same or greater
quantities of the same Products (i.e. a product with the same comcode) in the
same calendar year under substantially similar terms and conditions ("Favored
Customer Pricing").
For purposes of this Section 7, the term "other customers" shall exclude
Affiliates of Lucent, distributors, resellers, sales agents, federal, state,
municipal and other governmental entities. Further, the following sales shall
not be considered in any price comparisons: market entry sales, promotional
offers or the provision of laboratory, trial, test and demonstration Product.
9
11
8. ELECTRONIC DATA INTERCHANGE
Lucent agrees, if requested by Customer, to implement Electronic Data
Interchange ("EDI") as an electronic means of trading business documents with
Customer. The electronic business documents include Orders, acknowledgments,
Order changes, ship notices, invoices, remittance advice, electronic funds
transfer ("EFT") or such purchasing communications as may be requested by
Customer for transactions under this Agreement. Lucent shall, at its sole
expense, obtain, make fully operational and maintain all equipment, software and
other materials set forth in Customer's EDI Planning Guide. Lucent shall also
execute an Electronic Purchasing Agreement with Customer at the time of
Customer's request to initiate EDI as described in this section.
9. SPECIAL TOOLING AND EQUIPMENT
Any special tooling, test equipment, designs or other facilities Lucent
acquires, produces or uses within processes in connection with the Products
shall be Lucent's sole property.
10. PRODUCT MAKEUP AND CHANGES
Lucent shall have the right, in Lucent's sole discretion to change the
design or to discontinue the manufacture or availability to Customer of any
Product.
(a) In the event that any such design change affects the form, fit, or
function of the Product, then Lucent shall notify Customer of such change when
Lucent becomes aware of such change and no later than sixty (60) days before the
change becomes effective. If Lucent and Customer are unable to reach mutual
acceptance of the change within thirty (30) days from notification to the
Customer, Lucent may implement such change at Lucent's sole discretion and the
Customer may as its exclusive remedies have the following options:
(i) Cancel any outstanding purchase Orders for undelivered Products
affected by the design change without incurring any cancellation charges
for the Product provided that the design change is the reason for the
cancellation, and,
(ii) have the option of a last buy quantity of Product, or;
(iii) continue to purchase changed Product at terms defined in this
Agreement.
(b) For discontinuance of manufacturing or availability of the Product
identified in Schedule 3.1 to the Customer, Lucent will notify Customer of such
intent no later than one (1) year before implementation. In the case of Product
identified in Schedules 3.2 and 3.3, such notice shall be made no later than six
(6) months before implementation. Customer may as its exclusive remedies have
the following options:
(i) Cancel any outstanding purchase Orders for undelivered Products
without incurring any cancellation charges for the Product; or
10
12
(ii) have the option of a last buy quantity of Product.
(c) Lucent cannot guarantee compatibility, of Products hereunder, with
Customer's unique host environments and with future generations of other Lucent
products.
(d) In the event of a mandatory change defined herein as: any change
required to insure that the material, spares and repairs, (i) meet the
applicable Product purchase specification(s), (ii) are safe, and (iii) comply
with applicable laws, Lucent and Customer will define a mutually agreed to
process for mandatory change implementation.
11. PRICES; TAXES
(a) The applicable prices and charges for each Order shall be as set forth
in Schedule 3 or in a firm price quotation made by Lucent or, if not set forth
in either of those, in Lucent's customer price lists in effect on the day Lucent
receives the Order. All firm price quotes shall be deemed to incorporate this
Agreement.
(b) Prices for the Products listed in Schedule 3 are firm for twelve (12)
months from the Effective Date of this Agreement. Thereafter, Lucent may make
changes to the prices by providing sixty (60) days notice to the Customer prior
to the effective date of such price changes. In addition, the Parties agree to
meet annually to discuss the then current pricing for possible adjustment in the
following year commencing with the second year of this Agreement. Price quotes
for products not included in Schedule 3 shall be valid for thirty (30) days. If,
however, Lucent's adjustment in price is due to changes in raw material prices,
Lucent's price adjustment will be effective on the first day of the next
calendar month. The prices and charges are based on Lucent's standard, published
intervals for shipping, planning or completion, unless Lucent otherwise agrees
in writing.
(c) The parties agree taxes shall allocated as follows:
(i) Customer shall bear all taxes, duties, levies and similar charges
(and any related interest and penalties), however designated, imposed as a
result of the existence or operation of this Agreement, except (i) any tax
imposed upon Lucent in a jurisdiction other than the jurisdiction under the
laws of which Lucent was formed (hereinafter referred to as the "Resident
Jurisdiction") if such tax is allowable as a credit against the Resident
Jurisdiction income taxes of Lucent; and (ii) any net income tax imposed
upon Lucent by any government entity within Lucent's Resident Jurisdiction.
In order for the exception contained in (i) to apply, Customer must furnish
Lucent with such evidence as may be required by the Resident Jurisdiction
taxing authorities to establish that such tax has been paid within thirty
(30) days of issuance of notice by the local taxing authority so that
Lucent may claim the credit.
(ii) If Customer is required to bear a tax, duty, levy or similar
charge pursuant to the preceding paragraph, Customer shall pay such tax,
duty, levy or similar charge and any additional amounts as are necessary to
ensure that the net amounts received by Lucent hereunder
11
13
after all such payments or withholdings equal the amounts to which Lucent
is otherwise entitled under this Agreement as if such tax, duty, levy or
similar charge did not exist.
(iii) Lucent shall not collect an otherwise applicable tax if
Customer's purchase is exempt from Lucent's collection of such tax and a
valid tax exemption certificate is furnished by Customer to Lucent.
(iv) All prices mentioned in this Agreement are exclusive of value
added taxes, turnover taxes, sales taxes or similar taxes, including any
related interest and penalties (hereinafter all referred to as "VAT"). In
the event that any VAT is payable on the Products and/or services supplied
by Lucent to Customer under this Agreement, this VAT shall be added to the
prices mentioned and shall be for the account of Customer. If VAT on the
supplies of Lucent is payable by Customer under a reverse charge procedure
(i.e., shifting of liability, accounting or payment requirement to
recipient of supplies), Customer shall ensure that Lucent will not
effectively be held liable for this VAT by the relevant taxing authorities
or other parties. Where applicable, Lucent shall use its reasonable
commercial efforts to ensure that its invoices to Customer are issued in
such a way that these invoices meet the requirements for deduction of input
VAT by Customer, if Customer is permitted by law to do so.
12. TERMS OF PAYMENT
(a) Invoices for Products will be sent upon shipment or as soon thereafter
as practicable and shall be paid by Customer net thirty (30) days from the date
of the invoice. Lucent may make partial shipments of Orders, unless the Customer
specifically states in its Order that the Order shall be shipped complete. Such
partial shipments shall be separately invoiced and shall be paid by Customer net
thirty (30) days from the date of the invoice and not necessarily when the
remaining shipments occur.
(b) Payment shall be made only for the Products and quantities specified in
the Order. Customer may deduct from the amount indicated on the invoice all
Products delivered which were not specified. Customer shall notify Lucent in
writing and, following acknowledgment by Lucent, these Products shall be
returned by Customer to Lucent at Lucent's expense. The expenses borne by Lucent
shall include without limitation, custom duties, taxes, levies, insurance and
freight.
(c) Customer will advise Lucent of any billing discrepancies or disputes
about an invoice within ten (10) days of receiving it. Overdue payments, except
those that Customer has disputed in good faith, shall be subject to a late
payment charge of one and one-half percent (1 -1/2%) per month of the overdue
amount (but not to exceed the maximum lawful rate). Customer will reimburse
Lucent for reasonable attorneys' fees and other costs associated with collecting
delinquent payments.
12
14
13. TITLE, RISK OF LOSS, DELIVERY
(a) Title and risk of loss to Products shall pass to Customer upon delivery
to the Customer. Title to all Software (whether or not part of Firmware)
furnished by Lucent, if any, and all copies thereof made by Customer, including
translations, compilations, and partial copies are, and shall remain, the
property of Lucent. Where Customer is located outside the United States, title
and risk of loss shall pass no earlier than when the products have entered
international commerce outside the United States. Customer shall notify Lucent
promptly of any claim with respect to loss which occurs while Lucent has the
risk of loss and shall cooperate in every reasonable way to facilitate the
settlement of any claim. For purposes of this section, "delivery" shall mean the
point at which Lucent or Lucent's supplier or agent turns over possession of the
Product to Customer, Customer's employee, Customer's designated carrier,
Customer's warehouse, or other Customer's agent and not necessarily the final
destination shown on the Order. Nothing herein shall, during the period a party
has the risk of loss or damage to an item, relieve the other party of
responsibility for loss or damage to the item resulting from the acts or
omissions of such other party, its employees or agents.
(b) Acceptance of Products that are generally available from Lucent will be
deemed to occur on receipt. Customer reserves the right to reject any delivery
if the Product delivered does not conform to the Order. To be effective,
Customer's rejection (or revocation of acceptance) of a non-conforming shipment
must be made by written notice within ten (10) days after delivery. Thereafter,
Customer shall have recourse to the appropriate warranty as its exclusive remedy
for non-conformity. Products in a rejected shipment shall be returned to Lucent
in original or equivalent packaging in accordance with Lucent's previously
supplied written instructions together with a written statement of the reason
for such rejection.
14. WARRANTIES AND WARRANTY EXCLUSIONS
(a) Lucent makes the following warranties to Customer:
(i) Lucent warrants to Customer that it will repair or replace
Products which, at the time of shipment and under proper and normal use (as
unmodified), contain defects in material or workmanship or fail to conform
to Lucent's applicable Product descriptions, if any, and such failure
appears in any Product within twelve (12) months of the date title to
Product is transferred to Customer (the "Warranty Period"). Lucent will, at
its option, either repair or replace the defective Product without charge
at Lucent's manufacturing or repair facility or at Customer's facility, or
will refund the purchase price of the defective Products, provided: (1)
that Customer notifies Lucent of the purported failure to conform to this
warranty within the Warranty Period, and (2) that Lucent's examination of
the Product discloses that the purported failure to conform to this
warranty is present. Customer shall follow Lucent's instructions regarding
return of Products to the place in the United States designated by Lucent,
and no Products will be accepted for repair, replacement or refund absent
Customer's following such instructions. In the case of any such return,
Customer shall bear the risk of loss or damage and shall prepay all
transportation charges to Lucent. Repaired or replacement Products shall be
shipped to a continental U.S. destination by
13
15
Lucent at its expense and risk of loss or damage. Customer shall be
responsible for any custom duties, local taxes and expenses related to the
importation of repair or replacement Products and any requested premium
transportation. Replaced parts and Products shall become Lucent's property.
Lucent shall not be responsible under this warranty for deinstallation or
reinstallation or for related expenses arising out of the alteration of
Customer's or a third party's premises or building, or removal, replacement
or relocation of other items not purchased hereunder. If Lucent determines
that any returned Product is not defective, Customer shall pay Lucent all
costs of handling, inspection, repairs and transportation at Lucent's then
prevailing rates.
(ii) Repair and replacement parts and Products provided under the above
warranty are warranted as set forth above, but only for sixty (60) days
from the date of repair or replacement, or, for the remainder of the
Warranty Period, whichever is greater. If in lieu of repair of the returned
Product, Lucent replaces such Product, then the replacement Product shall
be new Product.
(iii) All rights exercised under this warranty shall be exercised only
by Customer.
(b) The foregoing warranty does not extend to the functioning of Lucent's
Products, as integrated, or assembled by Customer with other equipment, unless
such integration or assembly was approved in writing by Lucent; to expendable
items; to experimental or developmental products; to other products, procured
from other sources, which were integrated or assembled by Customer with Lucent's
products; or to products which have been subject to misuse, neglect, accident or
abuse; have been improperly wired, repaired or altered by anyone other than
Lucent; have been improperly installed, stored or maintained by anyone other
than Lucent; have been used in material violation of Lucent's instructions; or
have had their serial numbers or month and year of manufacture or shipment
removed, defaced or altered. Lucent makes no warranty, express or implied, to
any customer of Customer regarding Customer's total system, and Customer shall
make no representation to the contrary to a customer.
THE FOREGOING WARRANTY IS IN LIEU OF AND EXCLUDES ALL OTHER EXPRESS AND IMPLIED
WARRANTIES, INCLUDING BUT NOT LIMITED TO WARRANTIES OF MERCHANTABILITY AND
FITNESS FOR A PARTICULAR PURPOSE. CUSTOMER'S SOLE AND EXCLUSIVE REMEDY FOR ANY
BREACH OF THIS WARRANTY, WHETHER IN CONTRACT, TORT, STRICT LIABILITY OR
OTHERWISE, SHALL BE LUCENT'S OBLIGATION TO REPAIR, REPLACE OR REFUND AS SET
FORTH ABOVE.
15. INDEMNITY
Lucent will indemnify and save harmless Customer from any loss or damages
(including reasonable attorneys' fees) awarded against Customer by final
judgment (or by settlement approved by Lucent) because of claims, suits, or
demands of third parties for personal injury or tangible property damage (as
limited below) to the extent such loss or damage is caused by or results solely
from the negligent acts of Lucent or its employees or agents provided 1)
Customer promptly notifies Lucent in writing of any suits, claims or demands
against Customer for which
14
16
Lucent is responsible under this indemnity, 2) Customer gives Lucent full
opportunity and authority to assume the sole defense of and settle such suits
and 3) Customer furnishes to Lucent upon request all information and assistance
available to Customer for defense against any such suit, claim or demand.
Lucent's liability under this indemnity, however, shall in no event exceed the
greater of $100,000 or the value of the specific Product giving rise to the
claim for any one occurrence. This indemnity is in lieu of all other obligations
of Lucent, express or implied, in law or inequity, to indemnify Customer (except
pursuant to Section 16, "Infringement").
16. INFRINGEMENT
In the event of any claim, action, proceeding or suit by a third party
against Customer alleging an infringement of any patent, copyright, or
trademark, or a violation of any trade secret or proprietary rights by reason of
the use of any Product furnished by Lucent to Customer under this Agreement,
Lucent, at its expense, will defend Customer, subject to the conditions and
exceptions stated below. Lucent will reimburse Customer for any cost, expense or
attorneys' fees, incurred at Lucent's written request or authorization, and will
indemnify Customer against any liability assessed against Customer by final
judgment on account of such infringement or violation arising out of such use.
If Customer's use shall be enjoined or in Lucent's opinion is likely to be
enjoined, Lucent will, at its expense and at its option, either (1) replace the
enjoined Product furnished pursuant to this Agreement with a suitable substitute
free of any infringement; (2) modify it so that it will be free of the
infringement; or (3) procure for Customer a license or other right to use it. If
none of the foregoing options are practical, Lucent will remove the enjoined
Product and refund to Customer any amounts paid to Lucent therefor less a
reasonable charge for any actual period of use by Customer.
Customer shall give Lucent prompt written notice of all such claims,
actions, proceedings or suits alleging infringement or violation and Lucent
shall have full and complete authority to assume the sole defense thereof,
including appeals, and to settle same. Customer shall, upon Lucent's request and
at Lucent's expense, furnish all information and assistance available to
Customer and cooperate in every reasonable way to facilitate the defense and/or
settlement of any such claim, action, proceeding or suit.
No undertaking of Lucent under this clause shall extend to any such alleged
infringement or violation to the extent that it: (1) arises from adherence to
design modifications, specifications, drawings, or written instructions which
Lucent is directed by Customer to follow, but only if such alleged infringement
or violation does not reside in corresponding commercial Product of Lucent's
design or selection; or (2) arises from adherence to instructions to apply
Customer's trademark, trade name or other company identification; or (3) resides
in a product which is not of Lucent's origin and which are furnished by Customer
to Lucent for use under this Agreement; or (4) relates to uses of Product
provided by Lucent in combinations with other material, furnished either by
Lucent or others, which combination was not installed, recommended or otherwise
approved by Lucent. In the foregoing cases numbered (1) through (4), Customer
will
15
17
defend and save Lucent harmless, subject to the same terms and conditions and
exceptions stated above, with respect to Lucent's rights and obligations under
this clause.
The liability of Lucent and Customer with respect to any and all claims,
actions, proceedings or suits by third parties alleging infringement of patents,
trademarks or copyrights or violation of trade secrets or proprietary rights
because of, or in connection with, any Products furnished pursuant to this
Agreement shall be limited to the specific undertakings contained in this
clause.
17. TRADEMARKS AND OTHER INDICIA
(a) Products delivered hereunder will be marketed by Customer under trade
names and trade dress of Customer or Customer's distributors unless Customer and
Lucent execute a separate trademark license agreement. Customer will provide
Lucent with written instructions and will bear all costs associated with
applying Customer's trade name and trade dress to Products. Products delivered
hereunder may also bear certain trade names, trademarks, trade devices, logos,
codes or other symbols of Lucent (hereinafter "Marks"). Lucent hereby grants
Customer permission to market Products bearing such Marks in accordance with the
terms of this Agreement. If Lucent grants Customer permission to use its Marks
in Customer's marketing and advertising of, and in Customer's publicity relating
to, Products and licensed materials, such use shall conform to Lucent's written
standards and guidelines relating thereto, which may be revised by Lucent from
time to time. Such use shall inure to the benefit of Lucent and shall not invest
in Customer any rights in or to the Marks. All uses of Marks by Customer shall
be subject to pre-publication or pre-use review and approval by Lucent. If, in
Lucent's judgment, any use of Marks by Customer is deemed detrimental to the
Marks or Lucent's reputation, or is deemed otherwise undesirable, Lucent may
withdraw such permission without liability as a result thereof.
(b) Customer shall not conduct business under any of the Marks or
derivatives or variations thereof, and Customer shall not directly or indirectly
hold itself out as having any relation to Lucent or its Affiliates other than as
set forth herein. Marks may not be used to identify the Customer.
(c) Advertising by Customer that shows and identifies product, brands,
software (including related documentation), services or other items not covered
by this Agreement may not use Marks without Lucent's prior written consent.
Customer will not alter or remove any Marks applied to Products or licensed
materials without the written approval of Lucent.
(d) All references to Customer in this Section 17 shall also be intended to
include OEM Customers. In its agreements with its OEM Customers, Customer shall
use commercially reasonable efforts to require said customers to comply with the
provisions of this Section.
18. EXCLUSIVE REMEDIES; LIMITATION OF LIABILITY
(a) For purposes of the exclusive remedies and limitations of liability set
forth in this Section, each party shall be deemed to include its respective
subsidiaries and Affiliates and the
16
18
directors, officers, employees, agents, representatives, subcontractors and
suppliers of each of them; and "damages" shall be deemed to refer collectively
to all injury, damage, loss or expense incurred.
(b) Lucent's entire liability to Customer and Customer's exclusive remedy
against Lucent for any damages caused by any Product defect or failure, or
arising from the performance or non-performance of any work, regardless of the
form of action, whether in contract, tort including negligence, strict liability
or otherwise shall be as follows:
(i) for infringement, the remedies set forth in the Section 16,
Infringement;
(ii) for the non-performance of Product or work performed during the
warranty period, the remedies stated in the Section 14, entitled Warranties
and Warranty Exclusions;
(iii) for tangible property damage or bodily injury or death to any
person proximately caused by Lucent's negligence, the amount of proven
direct damages; and
(iv) for any claims not set forth above, Lucent's liability shall be
limited to direct damages that are proven, in an amount not to exceed the
greater of $100,000 or the value of the specific Product giving rise to the
claim.
NOTWITHSTANDING ANY OTHER PROVISION OF THIS AGREEMENT, NEITHER PARTY SHALL BE
LIABLE FOR INCIDENTAL, INDIRECT, SPECIAL, EXEMPLARY OR CONSEQUENTIAL DAMAGES,
INCLUDING BUT NOT LIMITED TO LOST PROFITS, SAVINGS OR REVENUES OF ANY KIND,
WHETHER OR NOT ANY SUCH PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH
DAMAGES. THIS PROVISION SHALL SURVIVE FAILURE OF AN EXCLUSIVE REMEDY.
19. INDEMNIFICATION BY CUSTOMER
Customer will indemnify and save harmless Lucent from any loss or damages
(including reasonable attorneys' fees) awarded against Lucent by final judgment
(or by settlement approved by Customer) because of claims, suits, or demands of
third parties for personal injury or tangible property damage (as limited below)
to the extent such loss or damage is caused by or results solely from the
negligent acts of Customer or its employees or agents provided 1) Lucent
promptly notifies Customer in writing of any suits, claims or demands against
Lucent for which Customer is responsible under this indemnity, 2) Lucent gives
Customer full opportunity and authority to assume the sole defense of and settle
such suits and 3) Lucent furnishes to Customer upon request all information and
assistance available to Lucent for defense against any such suit, claim or
demand. Customer's liability under this indemnity, however, shall in no event
exceed the greater of $100,000 or the value of the specific Product giving rise
to the claim for any one occurrence. This indemnity is in lieu of all other
obligations of Customer, express or implied, in law or inequity, to indemnify
Lucent (except pursuant to Section 16, "Infringement").
17
19
20. USE OF CONFIDENTIAL INFORMATION
(a) All Confidential Information shall belong to the party disclosing it.
The disclosing party grants the receiving party the right to use Confidential
Information only for purposes expressly permitted in this Section. Lucent shall
use Customer's Confidential Information only to perform Lucent's obligations
under this Agreement. Customer shall use Lucent's Confidential Information only
to order, evaluate, use, install, and maintain the Products furnished hereunder.
(b) The receiving party
(i) shall not reproduce or copy the disclosing party's Confidential
Information, in whole or in part, except as authorized in this Agreement or
in writing by the disclosing party;
(ii) shall return or destroy the Confidential Information (including
any full and partial copies) when no longer needed or when requested to do
so by the disclosing party;
(iii) shall hold the Confidential Information in confidence;
(iv) shall disclose Confidential Information only to those employees
and independent contractors who have a need to know and use the
Confidential Information for the permitted purposes, provided that the
independent contractors have agreed in writing to maintain the
confidentiality of the information and are not employees of any competitor
of the disclosing party with respect to the Products sold hereunder. The
receiving party shall provide the disclosing party, at its request, with a
copy of such writing.
(c) The foregoing restrictions and obligations shall not apply to
information that the receiving party can demonstrate: (a) was independently
developed by or for the receiving party without reference to the disclosing
party's Confidential Information; (b) has become publicly known through acts not
attributable to the receiving party; (c) was in the receiving party's possession
or was known by the receiving party at the time of disclosure; or (d) was
received without restriction from another party.
21. CONFIDENTIALITY OF AGREEMENT
Each party shall keep confidential all provisions of this Agreement and any
Order except as reasonably necessary for a party to perform and except as
required by applicable laws or regulations. In the latter case, the party
required to disclose this Agreement or any Order shall promptly inform the other
party prior to disclosure and shall make all reasonable efforts to obtain a
protective order or other confidential treatment and to limit disclosure only to
those portions necessary to comply with the applicable law or regulation.
22. PUBLICITY
18
20
Except as provided in Section 17, neither party shall release or publish
news releases, announcements, advertising or other publicity relating to the
Products under this Agreement or mentioning or implying the name, trademarks,
logos, service marks or other identification of the other party or its
Affiliates or their respective personnel without the prior review and written
consent of the other party.
23. ASSIGNMENT
Except as provided in this section, neither party shall assign this
Agreement or any right or interest under this Agreement, nor delegate any work
or obligation to be performed under this Agreement, (an "assignment") without
the other party's prior written consent. Any attempted assignment in
contravention of this provision shall be void and ineffective. Nothing shall
preclude a party from employing a subcontractor in carrying out its obligations
under this Agreement. A party's use of such subcontractor shall not release the
party from its obligations under this Agreement. Notwithstanding the foregoing,
either party has the right to assign this Agreement and to assign its rights and
delegate its duties under this Agreement, in whole or in part, at any time and
without the other party's consent, to any present or future subsidiary or
Affiliate of the assigning party, to any entity that is the successor to the
business of any such party that relates to this Agreement, or to any combination
of the foregoing. Such assignment or delegation shall release the assigning
party from any further obligation or liability thereon. The assigning party
shall give the other party prompt written notice of the assignment. For the
purposes of this section, the term "Agreement" includes this Agreement, any
subordinate agreement placed under this Agreement and any Order placed under
this Agreement or subordinate agreement.
24. AUTHORIZED THIRD PARTY PURCHASERS
The parties understand and agree that Lucent will at all times during the
life of this Agreement remain an independent seller. In no event shall Customer
have any responsibility for any business transactions between Lucent and any
independent third party purchasing Products from Lucent. Customer, however, may
provide written authorization for certain third parties to purchase Products
from Lucent under the pricing terms of this Agreement provided such sales are
for use or benefit of Customer. Lucent agrees to (a) honor such authorizations
upon written notice from Customer, and sell the Products to such Authorized
Third Parties; (b) only accept purchase Orders from Authorized Third Parties
that reference the Customer part number and are issued solely in the performance
of contracted work for Customer; and (c) notify Customer immediately if an
Authorized Third Party fails to meet the conditions in (b). For purposes of this
Agreement, a third party is an "Authorized Third Party" hereunder only if Lucent
is able, after using reasonable commercial efforts and its reasonable business
judgment, to enter into a supplier-customer relationship with such third party.
If such third party and Lucent have an existing supplier-customer relationship,
the third party is an "Authorized Third Party" hereunder only if Lucent is able,
after using reasonable commercial efforts and its reasonable business judgment,
to enter into arrangements acceptable to Lucent with such third party to address
transactions as an Authorized Third Party. Lucent reserves the right to
terminate the supplier-
19
21
customer relationship of any independent third party for any reasonable business
purpose or reason.
25. TERMINATION
If either party is in material breach of any term of this Agreement and
such breach continues for thirty (30) days (or for ten (10) days in case of
obligations under Section 20, "Use of Confidential Information") after receiving
notice from the other party, then the non-breaching party may terminate this
Agreement without any further obligation or liability except for Products
already shipped. The non-breaching party shall cooperate fully with the other
party to facilitate a remedy of a material breach within the applicable cure
period. The Parties' rights and obligations which by their nature would continue
beyond the termination or expiration of this Agreement shall survive such
termination or expiration.
26. FORCE MAJEURE
Lucent shall not be held responsible for any delay or failure in
performance of any part of this Agreement to the extent such delay or failure is
caused by fire, flood, explosion, war, strike, embargo, government requirement,
civil or military authority, act of God, nature or the public enemy, failure of
any supplier or subcontractor of Lucent to deliver on schedule materials,
equipment or machinery, inability to secure raw materials or transportation
facilities, inadequate yield of Products despite Lucent's reasonable efforts,
act or omission of carriers or any other causes beyond its reasonable control.
Lucent may, in the event of any such circumstance, allocate output among
Customer and its other customers, whether or not covered under contract, in a
fair and reasonable manner, taking into account Lucent's contractual
commitments, its available production and such other factors as Lucent deems
appropriate.
27. EMERGENCY SERVICE
The Parties agree that the following provisions shall apply solely to the
Specialty Fiber Product identified in Schedules 3.1 and 3.2 and any custom
Product added to Schedule 3.3 and only during such time as Lucent is sole
provider of Product in accordance with Section 6(a)(iii).
(a) Lucent will furnish a written plan of action ("Emergency Backup Plan")
to Customer on or before February 1, 2001 that covers Lucent's plans on how it
will continue to perform its obligations under this Agreement in case of an
unforeseen catastrophe, including a Force Majeure condition, or any other
condition in which Lucent will be unable to produce and ship Product to meet
Customer's Orders as accepted by Lucent for eight (8) consecutive weeks. The
Emergency Backup Plan will identify Lucent's secondary manufacturing location(s)
and include the estimated time for the implementation of such Emergency Backup
Plan and production of Product.
(b) In the event the Emergency Backup Plan fails of its essential purpose,
the Customer may at its option, terminate this Agreement, or any Order (with
respect to the Product identified in
20
22
the Order and affected by such delay or failure) in accordance with the Force
Majeure, and/or exercise any other rights and remedies it may have, at law or at
equity.
(c) In the event Lucent has failed to perform its obligations in accordance
with its delivery commitment and the Force Majeure provision of this Agreement,
and Lucent has not cured any such default in accordance with the intervals
specified in the Emergency Backup Plan, Customer may at its option require
Lucent to grant to Customer a non-exclusive, worldwide, revocable license for
Customer to manufacture the applicable Products; use shall be limited to the
manufacture of such Products. Lucent shall, under such circumstances and at such
time, furnish to Customer without cost all necessary assistance as will permit
Customer to commence manufacture of the Products, which may include
documentation or know-how along with a reasonable amount of Lucent's technical
assistance. Such license shall remain in effect for the balance of this
Agreement or until the conditions that caused Lucent to fail in its obligations
be cured, whichever shall occur earlier. When such conditions are cured, then
Customer shall resume purchasing Product from Lucent in accordance with the
terms of this Agreement. In case a third party supplier must manufacture Product
due to Lucent's inability to manufacture or Lucent's continued default, Lucent
shall fully cooperate with Customer and such third party supplier to ensure a
smooth transition of production with minimal interruption of business with
Customer, provided, however, that such third party agrees in writing to maintain
the confidentiality of all information provided to it hereunder.
28. CUSTOMS DUTY DRAWBACK
Customer reserves the right to claim United States customs duty drawback on all
sales made to Lucent under this Agreement. Lucent shall cooperate with Customer
in this regard in all reasonable ways, including without limitation, providing
proof of exportation, advance notice of exportation, certificates, endorsements,
or any other documentation or proof as may be necessary for Customer, or its
Affiliates, to receive payment of the drawback claims(s) and, if required by the
United States Customs Service, by making the Products available for examination
by the United States Customs Service.
29. NOTICES
All notices or other communications under this Agreement shall be in
writing and shall be deemed to be duly given when (a) delivered in person, (b)
deposited in the United States mail or private express mail, postage prepaid,
(c) by guaranteed overnight delivery, (d) by courier, or (e) by confirmed
telecopy addressed to the respective party as follows addressed as follows:
If to Lucent, to:
Lucent Technologies Inc.
000 Xxxxxxxx Xxxxxx
Xxxxxx Xxxx, Xxx Xxxxxx 00000
Attn: Chief Supply Officer
21
23
with a copy to:
Lucent Technologies Inc.
000 Xxxxxxxx Xxxxxx
Xxxxxx Xxxx, Xxx Xxxxxx 00000
Attn: General Counsel
If to Customer to:
Agere Systems Inc.
000 Xxxxx Xxxx.
Xxxxxxxxx, XX 00000
Attn: Procurement Director
with a copy to:
Agere Systems Inc.
000 Xxxxx Xxxx.
Xxxxxxxxx, XX 00000
Attn: General Counsel
Any party may, by notice to the other party, change the address to which
such notices are to be given.
30. SEVERABILITY
If any provision of this Agreement or the application thereof to any Person
or circumstance is determined by a court of competent jurisdiction to be
invalid, void or unenforceable, the remaining provisions hereof, or the
application of such provision to Persons or circumstances or in jurisdictions
other than those as to which it has been held invalid or unenforceable, shall
remain in full force and effect and shall in no way be affected, impaired or
invalidated thereby, so long as the economic or legal substance of the
transactions contemplated hereby or thereby, as the case may be, is not affected
in any manner adverse to any party. Upon such determination, the parties shall
negotiate in good faith in an effort to agree upon such a suitable and equitable
provision to effect the original intent of the parties.
31. CHOICE OF LAW
The Parties are familiar with New York commercial law, have been guided by
New York commercial law in their negotiation of this matter, conduct substantial
business in New York and desire to avoid uncertainty and disputes concerning the
law that will govern the agreement between the Parties. Accordingly, the Parties
expressly intend and agree that the construction interpretation and performance
of this Agreement and all transactions under it shall be governed by the laws of
the State of New York, excluding its choice of law rules and excluding the
United Nations Convention on Contracts for the International Sale of Goods.
22
24
32. HEADINGS
The article, section and paragraph headings contained in this Agreement are
for reference purposes only and shall not affect in any way the meaning or
interpretation of this Agreement.
33. WAIVERS OF DEFAULT
Waiver by any party of any default by the other party of any provision of
this Agreement shall not be deemed a waiver by the waiving party of any
subsequent or other default, nor shall it prejudice the rights of the other
party.
34. SPECIFIC PERFORMANCE
In the event of any actual or threatened default in, or breach of, any of
the terms, conditions and provisions of this Agreement, the party or parties who
are or are to be thereby aggrieved shall have the right to specific performance
and injunctive or other equitable relief of its rights under this Agreement, in
addition to any and all other rights and remedies at law or in equity, and all
such rights and remedies shall be cumulative.
35. AMENDMENTS
No provision of this Agreement shall be deemed waived, amended,
supplemented or modified by any party, unless such waiver, amendment, supplement
or modification is in writing and signed by the authorized representative of the
party against whom it is sought to enforce such waiver, amendment, supplement or
modification.
36. INTERPRETATION
Words in the singular shall be held to include the plural and vice versa
and words of one gender shall be held to include the other genders as the
context requires. The terms "hereof, " "herein, " and "herewith" and words of
similar import shall, unless otherwise stated, be construed to refer to this
Agreement as a whole (including all of the schedules, exhibits and appendices
hereto) and not to any particular provision of this Agreement. Article, section,
exhibit, schedule and appendix references are to the articles, sections,
exhibits, schedules and appendices to this Agreement unless otherwise specified.
The word "including" and words of similar import when used in this Agreement
shall mean "including, without limitation," unless the context otherwise
requires or unless otherwise specified. The word "or" shall not be exclusive.
References to "Schedule" shall include all sub-schedules thereto, but reference
to a sub-schedule (e.g. Schedule 3.1) shall refer solely to the specific
identified sub-schedule. Unless expressly stated to the contrary in this
Agreement, all references to "the date hereof," "the date of this Agreement,"
"hereby" and "hereupon" and words of similar import shall all be references to
the Effective Date, regardless of any amendment or restatement hereof.
23
25
37. MEDIATION, DISPUTE RESOLUTION
(a) The provisions set forth in this Section 37 shall apply to all
disputes, controversies or claims (whether arising in contract, tort or
otherwise) that may arise out of or relate to, or arise under or in connection
with this Agreement, or the transactions contemplated hereby (including all
actions taken in furtherance of the transactions contemplated hereby), or the
commercial or economic relationship of the parties relating hereto.
(b) It is the intent of the parties to use their respective reasonable best
efforts to resolve expeditiously and on a mutually acceptable negotiated basis
any dispute, controversy or claim between them with respect to the matters
covered hereby that may arise from time to time. In furtherance of the
foregoing, any party involved in a dispute, controversy or claim may deliver a
notice (an "Escalation Notice") demanding an in-person meeting involving
representatives of the parties at a senior level of management of the parties
(or if the parties agree, of the appropriate strategic business unit or division
within such entity). A copy of any such Escalation Notice shall be given to the
General Counsel, or like officer or official, of each party involved in the
dispute, controversy or claim (which copy shall state that it is an Escalation
Notice pursuant to this Agreement). Any agenda, location or procedures for such
discussions or negotiations between the parties may be established by the
parties from time to time; provided, however, that the parties shall use
commercially reasonable efforts to meet within thirty (30) days of the
Escalation Notice.
(c) If the parties are not able to resolve the dispute, controversy or
claim through the escalation process referred to above, then the matter shall be
referred to mediation. The parties shall retain a mediator to aid in their
discussions and negotiations by informally providing advice to the parties. Any
opinion expressed by the mediator shall be strictly advisory and shall not be
binding on the parties, nor shall any opinion expressed by the mediator be
admissible in any other proceeding. The mediator may be chosen from a list of
mediators previously selected by the parties or by other agreement of the
parties. Costs of the mediation shall be borne equally by the parties involved
in the matter, except that each party shall be responsible for its own expenses.
Mediation shall be a prerequisite to the commencement of any action by either
party.
(d) In the event that any party, after complying with the provisions set
forth in the preceding two paragraphs, desires to commence an action, such party
may submit the dispute, controversy or claim (or series of related disputes,
controversies or claims) giving rise thereto to a court of competent
jurisdiction.
(e) Unless otherwise agreed in writing, the parties will continue to
provide service and honor all other commitments under this Agreement during the
course of dispute resolution pursuant to the provisions of this Section with
respect to all matters not subject to such dispute, controversy or claim.
24
26
38. COUNTERPARTS; ENTIRE AGREEMENT; CORPORATE POWER
(a) This Agreement may be executed in one or more counterparts, all of
which shall be considered one and the same agreement.
(b) This Agreement and any exhibits, schedules and appendices hereto
contain the entire agreement between the parties with respect to the subject
matter hereof, supersede all previous agreements, negotiations, discussions,
writings, understandings, commitments and conversations with respect to such
subject matter and there are no agreements or understandings between the parties
other than those set forth or referred to herein.
(c) Each party represents as follows:
(i) each has the requisite corporate or other power and authority and
has taken all corporate or other action necessary in order to execute,
deliver and perform this Agreement and to consummate the transactions
contemplated hereby; and
(ii) this Agreement has been duly executed and delivered by it and
constitutes a valid and binding agreement enforceable in accordance with
the terms thereof.
25
27
IN WITNESS WHEREOF, the parties have caused this FIBER PRODUCT PURCHASE
AGREEMENT to be executed by their duly authorized representatives as of the
Effective Date.
LUCENT TECHNOLOGIES INC.
By: /s/ XXXXXX X. XXXXXX
___________________________
Name: Xxxxxx X. Xxxxxx
Title: Executive Vice President
AGERE SYSTEMS INC.
By: /s/ XXXX X. XXXXXXX
___________________________
Name: Xxxx X. Xxxxxxx
Title: President and Chief
Executive Officer
26
