EXHIBIT 10.2
MOTORVAC TECHNOLOGIES, INC.
PRODUCTS DISTRIBUTION AGREEMENT
THIS PRODUCTS DISTRIBUTION AGREEMENT ("AGREEMENT") is made and entered into
this ____________ day of _________________________, 1996, by and between
MOTORVAC TECHNOLOGIES, INC., a Delaware Corporation ("MTI"), with its principal
place of business located at 0000 X. Xxxxxxx Xxx, Xxxxx Xxx, Xxxxxxxxxx, X.X.X.
and CARTEK INTERNATIONAL, INC. ("Distributor") with its principal place of
business located at 0000 X.X. 00xx Xxxxxx, Xxxxx, Xxxxxxx 00000, U.S.A., with
reference to the following facts:
RECITALS
--------
A. MTI markets a range of products and replacement parts for cleaning gasoline
and diesel engines that are sold under the brand names listed in the
schedule attached hereto as Exhibit A, hereinafter referred to as the
"Products."
B. Distributor hereby represents that it possesses the facilities and ability
to promote the sale and distribution of the Products, in accordance with
the Agreement.
NOW, THEREFORE, in consideration of the foregoing recitals and the covenants and
agreements contained herein, the parties hereto hereby agree as follows:
1. APPOINTMENT OF SOLE AND EXCLUSIVE DISTRIBUTOR:
----------------------------------------------
a. The territory (the "Territory") covered by this Agreement is South and
Central America and the Caribbean, with the exception of Brazil,
Mexico and Puerto Rico.
(i) For the term of this Agreement and in accordance with all of the
terms, and subject to the conditions herein set forth, MTI hereby
appoints Distributor as the sole and exclusive distributor for
the sale and distribution of the Products within the Territory.
b. Distributor hereby accepts its appointment as a distributor of the
Products to develop a demand for, and to the best of its ability, sell
and distribute the Products within the Territory, and Distributor
hereby represents and warrants that it will make all sales hereunder
in accordance with the terms contained in this Agreement.
Distributor's obligations under this Agreement shall include, but not
be limited to:
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
1
(i) Establishing and maintaining Distributor owned facilities
located within the Territory for display and demonstration of
the Products;
(ii) Hiring, training and maintaining adequately trained sales and
technical personnel to develop a market and service the demand
for the Products in the Territory:
(iii) Undertaking advertising campaigns and trade shows;
(iv) Concurrent with execution hereof, Distributor shall provide to
MTI an Annual Minimum Performance Goal ("Annual Goal"), which
Annual Goal represents the minimum amount of Products to be
purchased by the Distributor from MTI for the first year of this
Agreement. The Distributor agrees that the Annual Goal shall be
required to be purchased by Distributor from MTI as follows:
(a) 50% of the Annual Goal or greater must be purchased
during the first 180 days of this Agreement and
subsequent years of this Agreement (the "First 180-Day
Goal"), and the balance of the Annual Goal must be
purchased during the second 180 days of this Agreement
and subsequent years of this Agreement (the "Second
180-Day Goal") (collectively called the "Annual Goal"),
which Annual Goal shall be deemed to be added to
Section 3b of this Agreement. During the remainder of
the term of this Agreement, the Distributor shall
provide MTI with an Annual Goal for all subsequent
years, and such Annual Goals shall be delivered to MTI
at least 60 days in advance of the start of each
respective year. All Annual Goals are subject to
acceptance by MTI at its sole discretion. In the event
that MTI does not accept the Annual Goal set by the
Distributor, MTI and the Distributor shall attempt to
come to an agreement on an Annual Goal. In the event
that (A) the Distributor does not timely deliver an
Annual Goal to MTI or (B) MTI does not accept an Annual
Goal set by the Distributor, or MTI and the Distributor
are unable to agree upon a replacement Annual Goal,
within 30 days of the date that the Distributor
communicates the Annual Goal to MTI (collectively, an
"Annual Goal Default"), then MTI may
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
2
terminate this Agreement in accordance with the
provisions of Section 8b hereof;
(v) Conducting its business in a manner that will reflect favorably
at all times on Distributor, MTI and the Products and the good
name, good will and reputation of MTI and its authorized
distributors. Distributor shall not itself or with others
participate in any illegal, deceptive, misleading or unethical
advertising or other practices or techniques that are or might
be detrimental to MTI, the Products or the public; and
(vi) Complying with all applicable laws and with the terms of this
Agreement in connection with the distribution of the Products.
2. TERM OF AGREEMENT:
------------------
a. The initial term of this Agreement shall be for three (3) years unless
earlier terminated as provided in this Agreement. Thereafter, the term
of this Agreement shall be automatically extended for successive one-
year periods unless either party to this Agreement gives the other
party to this Agreement notice of its intent to terminate this
Agreement, and such notice is received by the non-terminating party at
least sixty (60) days prior to the expiration of the initial term or
renewal term, as applicable.
3. DISTRIBUTOR PURCHASES:
----------------------
a. Exclusivity. Distributor shall obtain its requirements of Products
-----------
only from MTI.
b. Minimum Purchases/Performance Goals. Distributor acknowledges that it
------------------------------------
has represented to MTI that it possesses the facilities and the
ability to generate sales of and distribute the Products, in
accordance with this Agreement, and that based upon these
representations, MTI has entered into this Agreement with the
understanding that Distributor shall make the minimum purchases of
Product, in accordance with the Annual Goals set forth in this
Agreement or as periodically required by this Agreement. The
Distributor and the Company hereby agree that the Annual Goals, as set
forth following, are expressed in U.S. dollars and Units of Product.
If the Distributor meets or exceeds the Annual Goals or the First 180-
day Goal or the Second 180-day Goal, as defined in Section 1.b. of
this Agreement, for
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
3
the first year or subsequent years of this Agreement, in either U. S.
dollar purchases or Units of Product Purchases, that particular Goal
will be deemed to have been met. For the first year of this Agreement,
set forth below are the ANNUAL GOALS AS AGREED TO BETWEEN MTI AND THE
DISTRIBUTOR:
FOR THE FIRST YEAR:
-------------------
PRODUCTS
--------
Equipment:
Units of Petrol Machines
--------
Units of Diesel Machines
--------
Cleaning Solution:
Cases of Gasoline Fuel
System Cleaner or Drum
Equivalent
--------
Cases of Diesel Fuel
System Cleaner or Drum
Equivalent
--------
U. S. Dollar Annual Goal $350,000
--------
NOTE: MINIMUM PURCHASES OF 50% OF THE ABOVE TOTALS (IN EITHER PRODUCT OR IN
-----
DOLLARS) MUST BE ACHIEVED WITHIN THE FIRST 180 DAYS FOR THIS FIRST YEAR OF THIS
AGREEMENT.
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
4
c. Minimum Performance Goals / Subsequent Years. The form of schedule shown
---------------------------------------------
below should be used by the Distributor to submit Annual Goals for the Year
as specified in Section 1.b.iv.
Set forth below is the ANNUAL GOAL as agreed between MTI and the
Distributor:
FOR THE YEAR FROM _________________________ TO _________________________ :
PRODUCTS
--------
Equipment:
Units of Petrol Machines _______________________________
Units of Diesel Machines _______________________________
Cleaning Solution:
Cases of Gasoline Fuel
System Cleaner or Drum
Equivalent _______________________________
Cases of Diesel Fuel
System Cleaner or Drum
Equivalent _______________________________
U. S. Dollar Annual Goal _______________________________
ANNUAL GOAL IS REQUIRED TO BE SUBMITTED BY THE DISTRIBUTOR TO MTI AT LEAST 60
DAYS BEFORE THE EXPIRATION OF EACH YEARLY ANNIVERSARY OF THE DATE OF SIGNING OF
THAT CERTAIN PRODUCTS DISTRIBUTION AGREEMENT BETWEEN DISTRIBUTOR AND MOTORVAC
TECHNOLOGIES, INC. ("MTI") AND THIS ANNUAL GOAL IS SUBJECT TO ACCEPTANCE BY MTI
IN ITS SOLE DISCRETION.
SUBMITTED BY: ____________________________ DATE: ________________
DISTRIBUTOR NAME: ________________________
ACCEPTED BY: ____________________________ DATE: ________________
ON BEHALF OF MTI
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
5
d. Normal Retail Price. Concurrent with each submission of Annual Goal
--------------------
by the Distributor under this Agreement, the Distributor shall also
submit to MTI the "Normal Retail Price" of each and all Products in
the Distributor's Territory. Such Normal Retail Price shall be the
price at which the Products are sold to the end user of the Products,
normally a repair garage or service center. Notwithstanding the
foregoing, Distributor is free to set its own resale prices
unilaterally. No employee or representative of MTI has any authority
to tell Distributor what its resale prices must be, nor to inhibit in
any way a Distributor's independent pricing decision.
e. Non-compete. During the term of this Agreement, Distributor will
------------
not, directly or indirectly, supply, sell, promote or distribute in
the Territory any other products that are similar to, or competitive
with, the Products. Distributor agrees that during the term of this
Agreement, and for a period of three (3) years after the termination
of this Agreement , Distributor will not attempt to replicate, sell,
promote, distribute or manufacture any cleaning solution or fuel
system cleaning machines for use, under any circumstances, with MTI's
patented and proprietary systems , and that any such actions by
Distributor would substantially and permanently damage MTI, and result
in the immediate termination of this Agreement (if applicable), and,
in connection therewith, MTI will be entitled to seek any remedy
available at law or in equity.
f. Restrictions With Respect to Proprietary Information.
-----------------------------------------------------
(i) Trade Secrets. Distributor hereby acknowledges and agrees that
-------------
MTI owns certain trade secrets and other confidential and/or
proprietary information and intellectual property which
constitute valuable property rights, which MTI has developed
through a substantial expenditure of time and money, which are
and will continue to be utilized in MTI's business and which are
not generally known to the trade. This proprietary information
expressly includes, but is not limited to, the list of names of
the distributors, dealers, customers and suppliers of MTI, the
identities of key personnel of the distributors, dealers,
customers and suppliers of MTI, and other information concerning
the Products, finances, personnel contractors processes, pricing
information, production schedules and other types of proprietary
information relating to MTI's operations. In recognition of these
facts, Distributor hereby agrees that the Distributor, both
during and after the term of this Agreement:
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
6
(a) Will not use or disclose, directly or indirectly, and will
keep secret and confidential, all trade secrets and
proprietary information of MTI, including but not limited to
those items specifically mentioned above;
(b) Will not, directly or indirectly, either on Distributor's
own behalf or on behalf of any other person or entity,
solicit or attempt to solicit any employee, contractor,
dealer or distributor of MTI to leave their employment,
contractor, dealer or distributor relationship with MTI;
(c) Upon the termination of this Agreement or at anytime at
MTI's request, Distributor shall return all documents or
materials which have been furnished to Distributor by MTI in
connection with this Agreement; and
(d) All uses by Distributor of MTI's name or any trademarks or
tradenames (or any other marks or names closely resembling
the same) now and hereafter owned by MTI or its affiliates
shall be subject to prior written approval by MTI.
Distributor is not authorized to use MTI's names or
trademarks in connection with any aspect of its business
other than in the sales, marketing and advertising of the
Products.
g. Distributor Further Acknowledges and Agrees:
--------------------------------------------
(i) Copying, duplicating, or imitating the Products by Distributor is
illegal and would result in permanent irreparable injury to MTI.
Any such activities will cause an immediate termination of this
Agreement, and MTI will be entitled to seek any remedy available
at law or in equity.
(ii) Distributor may sell the Products only in the Territory. If
Distributor sells any Products outside said Territory, either
directly or indirectly, the Distributor shall be in breach of
this Agreement and MTI shall have the right to terminate this
Agreement at its sole discretion by providing the Distributor
with 90 days advance written notice. MTI shall not be required to
sell to the Distributor any further Products after notification
of termination has been sent by MTI to the Distributor.
h. Purchase Price. MTI will sell to the Distributor the Products at the
---------------
prices shown in Exhibit B of this Agreement. These prices are
consistent with those
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
7
given to MTI's international distributors. MTI reserves the right to
adjust prices from time to time, but may not increase prices more than
two times per year, and each such price increase shall be effective
only on delivery of 30 days prior written notice by MTI to the
Distributor.
i. Payment. The payment of the purchase price for Products purchased by
--------
the Distributor from MTI may be made by cash, irrevocable letter of
credit, sight draft, electronic bank transfer or other such methods as
may be negotiated and accepted by MTI. No shipments of Product will be
made by MTI until method of payment has been accepted by MTI.
j. Brochures. MTI shall, at its expense, provide Distributor with an
----------
initial supply of MTI's current sales brochures and descriptive
materials in English, which materials include negatives, color
separations and ad slicks, as may be reasonably requested by
Distributor in connection with fulfilling Distributor's obligations
hereunder.
k. Orders. Distributor shall transmit written orders for Products to
-------
MTI. Distributor reserves the right to cancel an order if and when any
of the following circumstances occur and adversely affect the
Distributor or its business:
(i) War;
(ii) Cancellation of Most Favored Nation Treaty and Article 301; or
(iii) Anti-dumping duty charge.
l. Orders. MTI reserves the right to cancel any orders of the
-------
Distributor if and when any of the following circumstances occur and
adversely affect MTI or its business:
(i) War;
(ii) Orders by the government of the United States of America banning
foreign shipments; or
(iii) Acts of God that prevent MTI from completing an order.
MTI also reserves the right to cancel any order placed by the
Distributor or to refuse to ship or to delay the shipment thereof if
1. Distributor:
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
8
(i) shall fail to make any payments for Products in accordance with
the terms of this Agreement or in accordance with terms agreed
to between MTI and the Distributor, from time to time;
(ii) shall fail to meet the Annual Goal, or the First 180-day Goal or
the Second 180-day Goal set forth as part of this Agreement or
otherwise established from time to time;
(iii) has been notified of MTI's intent to terminate Distributor as a
distributor of MTI pursuant to this Agreement; or
(iv) is not in good financial condition, as determined by MTI; or
2. this Agreement shall have terminated pursuant to the provisions
hereof.
m. Shipments. MTI shall ship the Products or cause the Products to be
----------
shipped as ordered by Distributor upon MTI's acceptance of
Distributor's order and payment terms. MTI will not be responsible for
delays caused by shortage of materials, strikes, shortage of shipping
facilities, acts of God, or other causes not within the reasonable
control of MTI.
4. TRAINING:
---------
a. MTI shall provide initial training in the use of the Products to
Distributor except as specified below. MTI shall be responsible for
paying all expenses, salaries, travel and other costs incurred by
MTI's employees in connection with providing such training.
Distributor shall be responsible for the following expenses:
(i) Local transportation
(ii) Room and board (under special circumstances)
(iii) Any expenses related to the training which occurred in the
Territory.
Following the completion of the initial training and upon reasonable
request of Distributor, MTI shall make its personnel or consultants
available at locations to be selected by MTI for the purpose of
providing additional training in the use of the Products upon
reasonable request of Distributor. MTI shall, at its expense, supply
to Distributor a reasonable number of MTI's current operator manuals,
service bulletins and other materials for use in connection with the
use of the Products.
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
9
5. WARRANTIES:
-----------
a. Exclusive Warranties. MTI shall provide Distributor with the
---------------------
manufacturer's warranty applicable for the Products. Such warranty
generally provides that the equipment shall be in good working order
for a period of one (1) year from the date the Product is first placed
in service provided that the end of the Warranty period shall not be
--------
later than eighteen (18) months from the date of shipment of such
Product to the Distributor or the Distributor's customer by MTI (The
"Warranty Period").
b. Warranty Repairs. It will be the responsibility of the Distributor to
-----------------
effect repairs to the Products during the Warranty Period.
c. Parts Warranty Claims. All warranty claims must be submitted by the
----------------------
Distributor to MTI for approval. During the Warranty Period, MTI will
replace defective parts on a case by case basis at no charge to
Distributor with an agreed to freight allowance.
d. Sale of Replacement Parts. Nothing contained herein shall be deemed
--------------------------
to prohibit Distributor from selling replacement parts for the
Products within the Territory, provided that subject parts are
purchased from MTI.
e. Other. Distributor further acknowledges that said warranty is
------
effective only if the Products are used with CarbonClean/MotorVac
cleaning solutions listed in Exhibit A attached hereto. Distributor
acknowledges that no Warranties are created by this Agreement and,
with respect to the Products, MTI hereby disclaims all implied
warranties of merchantability and fitness for use for a particular
purpose.
6. INDEPENDENT CONTRACTOR:
-----------------------
This Agreement does not create the relationship of employer and employee,
partnership or agency between MTI and Distributor. Distributor, in
connection with all of its obligations hereunder, shall be an independent
contractor of MTI and under no circumstances is Distributor to be
considered to be the employee, partner or agent of MTI. Distributor is not
granted any right by this Agreement to create any obligation or
responsibility, on behalf of or in the name of MTI. Distributor covenants
that it is and will remain in compliance with all federal, state and local
laws and regulations applicable to its business including, without
limitation, all labor regulations, and foreign, and United States federal
and state tax requirements.
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
10
7. MODIFICATIONS AND IMPROVEMENTS:
-------------------------------
Upon making or discovering any improvements to the Product, Distributor
shall:
a. provide MTI with all details of such improvements;
b. acknowledge that such improvements and the right to obtain any patent,
trademark, copyright or other similar protection belong exclusively to
MTI; and
c. provide such assistance to MTI as MTI may reasonably require to obtain
patents, copyrights or other similar protection.
8. TERMINATION:
------------
This Agreement may be terminated for any of the following reasons:
a. Expiration. After the expiration of the term of this Agreement, in
-----------
accordance with Section 2 hereof.
b. Goals. In the event that Distributor fails to provide the required
------
Annual Goals in accordance with Section 1(b(iv) hereof or fails to
purchase the required First 180-day Goal or Second 180-day Goal
amounts at any time, MTI may terminate this Agreement, at its sole
discretion, by providing the Distributor with thirty (30) days advance
written notice of its intent to terminate this Agreement.
c. Default. If, during the term of this Agreement, Distributor defaults
--------
in the performance of any of its other obligations under this
Agreement, or any of the representations or warranties made by
Distributor are determined to be untrue, MTI may give Distributor
notice of default and if Distributor fails to cure such default within
thirty (30) days (or if such default cannot be cured within thirty
(30) days, no diligent effort has been made to cure such default),
this Agreement shall be deemed terminated as of the end of such ninety
(90) day period without any further action on the part of MTI .
Distributor will then accept no further orders for the Products from
the Territory and MTI shall have no further obligations to Distributor
hereunder.
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
11
d. Insolvency. This Agreement will automatically terminate if either
-----------
party should become bankrupt, insolvent, or cease to do business, or
make an assignment for the benefit of creditors.
e. Competition This Agreement shall automatically terminate in the event
-----------
that the Distributor breaches any of the covenants against competition
contained in Sections 3.e. and 3.f.(i) hereof;
f. Sales Outside the Territory. In the event that the Distributor
----------------------------
breaches the sales covenants contained in Section 3.g.(ii) hereto,
then MTI may terminate this Agreement in accordance with the notice
provisions contained in Section 3.g.(ii) hereof.
g. No Waivers. The failure of MTI to terminate this Agreement pursuant to
-----------
any of the subparagraphs in this Section shall not be considered to be
a waiver by MTI of its right to terminate this Agreement in the future
pursuant to this section for such default or any similar default.
h. Repurchase. In the event of termination of this Agreement by either
-----------
party for any reason, MTI may at its option repurchase from
Distributor at the net price paid by the Distributor to MTI, less a
25% restocking charge and actual freight, duties and taxes on the
shipment thereof to the Distributor, any MTI Products at the
Distributor's place of business or in the possession of the
Distributor. On demand and at the tender of the repurchase price and
related cost, shipping and handling expenses and charges incurred by
the Distributor, Distributor shall deliver such Products to MTI. The
payment shall be by negotiable instrument.
9. MISCELLANEOUS:
--------------
a. Modification-Waiver. No cancellation, modification, amendment,
--------------------
deletion, addition, or other change in this Agreement or any provision
hereof, or waiver of any right or remedy herein provided, shall be
effective for any purpose unless specifically set forth in a writing
signed by the party to be bound thereby. No waiver of any right or
remedy in respect of any occurrence or event shall be deemed nor shall
constitute a continuing waiver or a waiver of any similar occurrence
or event on any other occasion.
b. Final Agreement. This Agreement shall be deemed for all purposes to
----------------
have been made in California. This Agreement supersedes and terminates
all prior or contemporaneous other agreements, oral or written,
between the
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
12
parties hereto with respect to the subject matter hereof and the
transactions contemplated hereby and discharges any liability of MTI
or any affiliated or predecessor corporation in respect of any such
prior agreements, and, together with the Exhibits hereto, contains the
entire agreement of the parties with respect to the subject matter
hereof.
c. Controlling Law. This Agreement and the performance of the
----------------
obligations imposed upon the parties hereunder shall be governed by
and construed in accordance with the laws of the State of California,
to the exclusion of all other laws. The parties each
(i) confer sole and exclusive jurisdiction upon, and agree that the
proper venue of any such action shall be in, the courts located
in Orange County, California, in connection with all disputes
arising under or related to this Agreement, and
(ii) waive any and all objections that they may have with respect to
jurisdiction of, or venue in, such court.
d. Successors and Assigns. The provisions of this Agreement shall be
-----------------------
binding upon and insure to the benefit of MTI and Distributor and
their respective successors and permitted assigns. Distributor may not
assign this Agreement (by operation of law or otherwise) without the
prior written consent of MTI. MTI may assign this Agreement to its
subsidiaries or parent company or to any related company upon 30 days
advance written notice provided by MTI to the Distributor.
e. Confidentiality. The parties mutually agree that any confidential
----------------
information furnished to the other, so labeled or described shall
remain confidential and not be made available to any other party,
without written permission from the party furnishing said information.
f. Notices. Any notice required or permitted hereunder shall be given by
--------
mailing the same in a sealed envelope, postage paid and sent via
registered mail addressed as follows:
MTI: MOTORVAC TECHNOLOGIES, INC.
0000 X. Xxxxxxx Xxx
Xxxxx Xxx, Xxxxxxxxxx, XXX 00000
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
13
Distributor: Cartek International, Inc.
0000 X.X. 00xx Xxxxxx
Xxxxx, Xxxxxxx 00000 X.X.X.
Attention: Xxxxxx Xxxxxx, President
Either party may change its address for notices hereunder by written
notice to the other party.
g. Limitation of Liability. MTI's liability to Distributor hereunder
------------------------
with respect to any order, MTI's performance thereof, or the Products
sold hereunder shall not exceed the purchase price paid by Distributor
for the Products. In no event shall MTI be liable to Distributor for
special, incidental or consequential damages.
h. Extraordinary Circumstances. Except for any payment obligations of
----------------------------
either party hereunder, neither MTI nor Distributor shall be liable
for any delay or failure to perform on account of any cause beyond
such party's reasonable control, including, but not limited to, work
stoppages, work slow-downs, strikes or other industrial disputes;
fire, explosions, floods, earthquakes or other acts of God; riots or
civil disturbances, war or other acts of civil or military
authorities; and delays caused by suppliers or material shortages.
i. Changes to Products. The Distributor hereby agrees and acknowledges
--------------------
the Company may, at its sole discretion, withdraw or replace or add
products to Exhibit A or B attached hereto at any time. The
distributor waives any right or notice on such a change.
IN WITNESS WHEREOF, the parties hereto have executed this Agreement as of
the day and year first above written.
MotorVac Technologies, Inc., Cartek International, Inc.
a Delaware corporation
By: /s/ Xxx X. Xxxxxx By: /s/ Xxxxxx Xxxxxx
------------------- -------------------
Its: President Its: President
------------------- -------------------
Date: 9/15/96 Date: 9/15/96
------------------- -------------------
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
14
EXHIBIT A
---------
PRODUCTS
--------
SUMMARY
-------
PART # BRAND NAME
------ ----------
500-0301 ECS-300i CarbonClean Gasoline Fuel System Cleaning
Machine
Includes: 200-3000 Basic Adaptor Kit
200-3000 Foreign Adaptor Kit
Instruction Manual
One Year Warranty
0500-4010 IDT 4000i CarbonClean Diesel Fuel System Cleaning
Machine
Includes: 200-3040 Adaptor Kit
User & Service Guide
One Year Warranty
400-0010 CarbonClean Diesel Fuel System Cleaner
(12) 16oz Cans
400-0020 CarbonClean Gasoline Fuel System Cleaner
(12) 8oz. Bottles
400-0030 CarbonClean Intake Cleaner (12) 8oz. Bottles
400-DRUM-D CarbonClean Diesel Fuel System Cleaner
55 Gallon Drum
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
15
EXHIBIT A
---------
PRODUCTS
--------
EQUIPMENT AND SOLVENT
---------------------
PART # DESCRIPTION
------ -----------
400-0010 Diesel Fuel System Cleaner - (12) 16oz. Cans
1 case = 12" x 10" x 8" (15 lbs)
30.5cm x 25.4cm x 20.3cm (6.8 kg)
400-0020 Gasoline Fuel System Cleaner - (12) 8oz. Bottles
1 case = 9" x 7" x 6" (7 lbs)
22.8cm x 17.8cm x 15.2cm (3.2 kg)
400-0030 Intake Cleaning Solvent - (12) 8oz. Bottles
1 case = 9" x 7" x 6" (7 lbs)
22.8cm x 17.8cm x 15.2cm (3.2 kg)
200-6000 Intake Cleaning Kit - (12) 8oz Bottle & Sprayer
1 case = 17" x 17" x 11" (15 lbs)
43.2cm x 43.2cm x 27.9cm (6.8 kg)
400-DRUM-D Diesel Fuel System Cleaner - 55 Gallon Drum
24" x 24" x 35" (462 lbs)/61.0cm x 61.0cm x 88.9cm (210
kg)
500-0301 ECS-300i Gasoline Fuel System Cleaning Machine
Includes: 200-3000 Basic Adaptor Kit
200-3009 Foreign Adaptor Kit
User Guide
One Year Warranty
16" x 15" x 38" (82 lbs)
40.6cm x 38.1cm x 96.5cm (37.2 kg)
500-4010 IDT 4000i Diesel Fuel System Cleaning Machine
Includes: 200-3040 Adaptor Kit
User and Service Guide
One Year Warranty
24" x 20" x 41" (115 lbs)
61.0cm x 50.8cm x 104cm (52.2 kg)
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
16
PART # DESCRIPTION
------ -----------
500-0200 CCS II - CarbonClean System II
Includes: 200-8085 CCS II Basic Adaptor Kit
200-8059 CCS II - Deluxe Adaptor Kit
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
17
EXHIBIT A
---------
PRODUCTS
--------
CARBONCLEAN REPLACEMENT PARTS
-----------------------------
SERIES 200 & 300
PART # DESCRIPTION
------ -----------
010-0005B XOLOX SHIELD
010-0006B TANK CAP
010-0007B P-200 CASTER
010-0008B P-200 HANDLE
010-0009B TANK RESERVOIR
010-0017B ECS 300i OVERLAY
010-0019B ECS HANDLE
010-0020B ECS AXLE
010-0021B ECS WHEEL
010-0022B ECS BASE LEG
010-0024B ECS HOSE BRACKET
010-0025B ECS CORD BRACKET
020-0010B BUZZER
020-0030B EXTERNAL WIRING HARNESS
020-0035B 5 AMP CIRCUIT BREAKER
020-0037B 10 AMP CIRCUIT BREAKER
020-0038B 15 AMP CIRCUIT BREAKER
020-0040B INTERNAL WIRING HARNESS
020-0063B ELEC. LAMP AMBER
020-0067B ELEC. LAMP WHITE
020-0073B ELEC. LAMP GREEN
020-0083B ELEC. LAMP RED
020-0090B RELAY 8 TRIM, EAR MOUNT
020-0100B ONOFF & PS/LEAK SWITCH
020-0110B PURGE SWITCH, 1/2 MT
020-0120B START SWITCH, 1/2 MT
020-0150B TIMER 60 MIN 3/8 W/NUT
020-0151B TIMER FACE PLATE
020-0152B TIMER KNOB BLACK
020-0374B STRAIN RELIEF 1/2 MT
030-0002B X.XXXX 1/4 X 1/8 FPT NI
030-0004B P-200 FM UNION 5/16 X 1/4 NT (NY)
030-0005B MALE ELBOW 1/4 X 1/4 MPT
030-0006B MALE ELBOW 1/4 X 1/8 MPT
030-0013B HEX NIPPLE 1/4 P NI
030-0015B MALE ELBOW 5/16 X 1/8 MPT NY
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
18
PART # DESCRIPTION
------ -----------
030-0016B X. XXXX 5/16 X 1/8 MPT NY
030-0017B X. XXXX 5/16 X 1/4 MPT NY
030-0020B X. XXXX 3/8 X 1/4 MPT NAB NI
030-0021B ECS F CONN 5/16 X 1/8 FPT NI
030-0022B X. XXXX 5/16T X 1/4 P NI
030-0023B X. XXXX 5/16T X 1/4 P NI
030-0024B M. ELBOW 5/16T X 1/8 NI
030-0025B X. XXXX 3/8T X 1/4P NI
030-0026B ECS X. XXXX 1/4 XXXX X 1/8 NI
030-0030B X. XXXX 3/8 X 1/4 FPT NI
030-0031B ELBOW 1/4 MPT X 1/4 FPT NI
030-0050B X. XXXX 3/8 X 1/8 MPT NI
030-0090B X-000 XXXXXXXX XXXXX 0 XXX 0/0 XXX
000-0000X XXX XXXXXXXX XXXXX, 0 XXX 0/0
030-0100B X-000 XXXXXXXX XXXXX-0 XXX 1/8
030-0105B ECS JUNCTION XXXXX-0 XXX 0/0
000-0000X XXXX ELBOW 3/8 X 1/4 MPT NI
030-0131B FEMALE ELBOW 3/8 X 1/4 MPT NI
030-0140B MALE ELBOW 3/8 X 1/8 MPT NI
030-0150B MALE ELBOW 5/16 X 1/4 MPT NI
030-0160B X. XXXX 5/16 X 1/8 MPT NI
030-0189B X. XXXX 1/4 FPT X MPT NI
030-0192B COMP ALIGN NUT 5/16
030-0205B P-200 CROSS 1/8 FPT NI
030-0206B CROSS 1/4 FPT NI
030-0208B X. XXXX 3/8 X 1/4 MPT NI
030-0209B TEE 3/8 NT X 1/4 MPT X 3/8 (NY)
USED WITH VACUUM SWITCH
030-0210B UNION 1/8 MPT X 1/4 MPT (NY)
030-0211B X. XXXX 90 3/8 X 1/4 FPT NY
040-0401B XOLOX PUMP MOUNT NUT
040-0500B ECS GRAB HANDLE LOCKWASHER
040-0502B ECS "E' CLIP FOR AXLE
040-0503B ECS AXLE SPACER
040-0505B ECS GRAB HANDLE NUT
040-0506B ECS LEG CAP
040-0507B ECS AXLE BUSHING NY
040-0508B ECS VAC HOSE SNAP BUSHING
040-0509B ECS GRAB HANDLE BOLT
040-5326B 3/32 X 4 NYLON CABLE TIE
050-0010B PSI GAUGE
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
19
PART # DESCRIPTION
------ -----------
050-0011B BAR GAUGE
050-0012B ECS VACUUM GAUGE
050-0013B ECS BAR VACUUM GAUGE
050-0008B VACUUM SWITCH 1/4 MPT
050-0015B 3 WAY SOLENOID 3/32
050-0017B PRESSURE SWITCH 1/8
050-0021B STAINLESS CK VALUE
050-0052B REG NEEDLE VALVE
050-0065B CONTROL VALVE
050-0074B FILTER, INLINE
050-0075B FILTER, SPIN-ON
050-0076B FILTER & BASE 1/4 FPT
050-0088B RELIEF VALVE 105 PSI
060-0440B HOSE CLAMP
060-0450B HOSE CLAMP
060-1000B 1/4 MALE TUBE ADAPTOR
060-1100B 5/16 MALE TUBE ADAPTOR
060-1200B 3/8 MALE TUBE ADAPTOR
060-1300B 1/4 FEMALE ADAPTOR (Open-end hose)
060-1400B 5/16 FEMALE ADAPTOR (Open-end hose)
060-1500B 3/8 FEMALE ADAPTOR (Open-end hose)
060-1600B 12 MM BANJO
060-1700B 90 TUBE 5/16 MPT FUEL INLET ADAPTOR
060-1800B 90 TUBE 3/8 MPT FUEL INLET ADAPTOR
060-1900B 12 MM BANJO BOLT
060-1901B 12 MM WASHER
060-1902B 12 MM CAP NUT
060-2000B 5/16 LOOP MALE ADAPTOR
060-2100B 3/8 PLUG COLLAR
060-2101B 3/8 CARB PLUG ADAPTOR
060-2200B 5/16 PLUG COLLAR
060-2201B 5/16 CARB PLUG ADAPTOR
060-2300B 14 MM FEMALE
060-2400B 1C MM BANJO
060-2401B 8 MM BANJO
060-2402B 14 MM BANJO
060-2501B FQD LOOP ADAPTOR
060-2502B TEE
060-2600B 16 MM FEMALE
060-2720B 10 MM BANJO BOLT
060-2800B 1/4 MALE CONNECTOR (Ford,GM,Chrysler,Jeep)
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
20
PART # DESCRIPTION
------ -----------
060-2900B 5/16 MALE NYLON (Ford,Lincoln,Mercury)
060-3000B 1/8 MPT ADAPTOR (Ford,Lincoln,Mercury)
060-3100B TBI & PFI INLET (GM)
060-3105B FEMALE SIDE OF 3100 (GM)
060-2700B 14 MM X 16 MM MALE UNION
060-2710B 8 MM BANJO BOLT
060-2711B 8 MM WASHER (Set of 3)
060-3200B 1/4 MPT ADAPTOR (Ford,Lincoln,Mercury)
060-3300B TBI & PFI OUTLET (GM)
060-3304B TBI & PFI USED W/1700 (GM)
060-3305B FEMALE SIDE OF 3300 (GM) (Replaces 060-4000)
060-3500B 3/8 MALE ADAPTOR (Ford,Lincoln,Mercury)
060-3505B 3/8 FEMALE ADAPTOR (Ford,Lincoln,Mercury)
060-3508B XXXXXXX VALVE (Ford,Lincoln,Mercury)
060-3600B 1/2 MALE ADAPTOR (Ford,Lincoln,Mercury)
060-3605B 1/2 FEMALE ADAPTOR (Ford,Lincoln,Mercury)
060-3700B XXXXXXX VALVE (GM,Chrysler,Jeep)
060-3800B VOLVO ADAPTOR
060-3900B 5/16 FQD (Ford,Lincoln,Mercury)
060-3901B 3/8 FQD (Ford,Lincoln,Mercury)
060-3902B 1/4 FQD (Ford,Lincoln,Mercury)
060-4100B HYUNDAI ADAPTOR
060-4200B 5/16 MALE METAL (GM,Chrysler,Jeep)
060-4205B 5/16 FQD (GM,Chrysler,Jeep)
060-4300B 3/8 MALE CONNECTOR(Ford,GM,Chrysler,Jeep)
060-4305B 3/8 FQD (GM,Chrysler,Jeep)
060-4405B 1/4 FQD (GM,Chrysler,Jeep)
070-0080B 1/4 NYLON TUBE
070-0085B 5/16 NYLON TUBE
070-0086B 3/8 NYLON TUBE
070-0100B HOSE VACUUM
080-0230B 1/4 FPT FQD NI
080-3301B O-RING VITON USED w/3304
080-3302B SM. O-RING VITON Used w/3300,3304
080-3402B LG. O-RING VITON Used w/3100,3500,4100
080-3501B SMALL CLIP & TETHER (Ford,Lincoln,Mercury)
080-3601B LARGE CLIP & TETHER (Ford,Lincoln,Mercury)
080-3602B O-RING VITON Used w/3600
080-3701B VITON SEAL,3700
080-3903B 5/16 RETAINER (Ford,Lincoln,Mercury)
080-3904B 3/8 RETAINER (Ford,Lincoln,Mercury)
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
21
PART # DESCRIPTION
------ -----------
080-3905B 1/4 RETAINER (Ford,Lincoln,Mercury)
080-4206B 5/16 RETAINER (GM,Chrysler,Jeep)
080-4306B 3/8 RETAINER (GM,Chrysler,Jeep)
080-4408B 1/4 RETAINER (GM,Chrysler,Jeep)
100-0090B ECS INTERNATIONAL MANUAL
100-0300B CHINESE OVERLAY
100-0104B FUEL INJECTOR PULSER IT100 (MQ)
100-4047B SPANNER NUT
100-4048B SPANNER WRENCH
100-5001B ICS TUBING (30")
200-0006B P-200 LOW FM ASSEMBLY
200-0007B P-200 HIGH FM ASSEMBLY
200-0011B P-200 BAR GAUGE ASSEMBLY
200-0050B P-200 2-WAY BLOCK ASSEMBLY
200-0064B P-200 5-WAY ASSEMBLY
200-0076B P-200 OUTPUT REGULATOR ASSEMBLY
(All"D"machines)
200-0083B P-200 RETURN REGULATOR ASSEMBLY
200-0093B TEE ASSEMBLY
200-0200B IN-LINE FILTER ASSEMBLY
200-0203B FILTER & TANK 5/16" ASSEMBLY
200-0204B XXXXXXX FILTER & TANK 3/8" ASSEMBLY
200-0280B P-200 VACUUM SWITCH ASSEMBLY
200-0300B ECS/P-200 RETURN HOSE ASSEMBLY
200-0400B ECS/P-200 OUTPUT HOSE ASSEMBLY
200-0704B XXXXXXX PUMP 5/16" ASSEMBLY
(With plumbing fittings)
200-0705B XXXXXXX PUMP 3/8" ASSEMBLY
(With plumbing fittings)
200-0706B XOLOX PUMP ASSEMBLY
(With plumbing fittings)
200-0800B P-200 CONTROL VALVE ASSEMBLY
200-1002B ECS BAR GAUGE ASSEMBLY
200-1004B ECS BAR VACUUM GAUGE ASSEMBLY
200-1008B ECS 2-WAY ASSEMBLY
200-1010B ECS 5-WAY ASSEMBLY
200-1011B ECS OUTPUT REGULATOR ASSEMBLY
200-1012B ECS RETURN REGULATOR ASSEMBLY
200-1013B ECS CONTROL VALVE ASSEMBLY
200-1014B ECS TEE ASSEMBLY
200-1175B FUEL QD TOOL KIT
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
22
PART # DESCRIPTION
------ -----------
200-3000B BASIC ADAPTOR KIT
200-3006B FORD ADAPTOR KIT
200-3008B GM ADAPTOR KIT
200-3009B ASIAN/EURO ADAPTOR KIT
200-4007B TIMER ASSEMBLY
200-4008B FILTER & BASE 3/8" ASSEMBLY
200-4009B FILTER & BASE 5/16" ASSEMBLY
200-5000B SOLENOID REPAIR KIT
200-8009B P-200 REGULATOR RETROFIT
300-3000B BASIC ORGANIZER BAG (GREEN)
300-3006B FORD ORGANIZER BAG (RED)
300-3008B GM ORGANIZER BAG (BLUE)
300-3009B ASIAN/EURO ORGANIZER BAG (ORANGE)
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
23
EXHIBIT A
---------
IDT 4000I REPLACEMENT PARTS
---------------------------
PART # DESCRIPTION
------ -----------
010-0034B TANK CAP
010-0026B WHEEL
010-0037B LEG
010-0040B FOOT GLIDE
010-0461B LOWER SENDING UNIT ADAPTOR
020-0049B ALARM HORN
020-4045B LOWER SENDING UNIT
020-0043B ELECTRICAL HARNESS, LOWER UNIT
020-0045B ELECTRICAL HARNESS, INTERNAL MAIN
020-0046B ELECTRICAL HARNESS, EXT. BATTERY
020-0047B ELECTRICAL HARNESS, EXT. SHUTDOWN
020-0091B RELAY
050-0018B PRESSURE SWITCH
050-0044B HYDRAULIC PUMP 12v (Diesel)
050-0086B FILTER ELEMENT REPLACEMENTS (20)
060-0590B FQD (Supply Tank)
060-0592B MQD (Supply Tank)
080-0230B FQD (Hose End)
100-0200B CHINESE OVERLAY
200-1471B OUTPUT HOSE ASSEMBLY
200-1472B RETURN HOSE ASSEMBLY
200-1960B UNIVERSAL ADAPTOR KIT
200-4003B OUTPUT SOLENOID ASSEMBLY
200-4004B PUMP ASSEMBLY
200-4031B ELECTRONIC HEAD ASSEMBLY
200-4032B FILTER ASSEMBLY
200-4038B PRESSURE SWITCH ASSEMBLY
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
24
EXHIBIT B
---------
PRICING
-------
EFFECTIVE JANUARY 1, 1996
Home Office:
0000 X. Xxxxxxx Xxx
Xxxxx Xxx, XX 00000
Tel: (000) 000-0000
Fax: (000) 000-0000
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
25
EXHIBIT B
---------
PRICING
-------
F.O.B. WAREHOUSE
PART # DESCRIPTION COST
------ ----------- ----
400-0010 Diesel Fuel System Cleaner - (12) 16oz Cans 95.00
1 case = 12" x 10" x 8" (15 lbs)
30.5cm x 25.4cm x 20.3cm (6.8 kg)
400-0020 Gasoline Fuel System Cleaner - (12) 8oz Bottles 62.00
1 case = 9" x 7" x 6" (7 lbs)
22.8cm x 17.8cm x 15.2cm (3.2 kg)
400-0030 Intake Cleaning Solvent - (12) 8oz Bottles 65.00
1 case = 9" x 7" x 6" (7 lbs)
22.8cm x 17.8cm x 15.2cm (3.2 kg)
200-6000 Intake Cleaning Kit - (12) 360.00
8oz Bottle & Sprayer
1 case = 17" x 17" x 11" (15 lbs)
43.2cm x 43.2cm x 27.9cm (6.8 kg)
400-DRUM-D Diesel Fuel System Cleaner - 55 Gallon Drum 2,050.00
24" x 24" x 35" (462 lbs)
61.0cm x 61.0cm x 88.9cm (210 kg)
500-0200 System II CarbonClean Machine w/Standard 825.00
Adaptor Set
200-8059 Adaptor Set - Deluxe for System II 150.00
(when purchased w/machine)
200-8059 Adaptor Set - Deluxe for System II 200.00
(when purchased without machine)
500-0307 ECS-300e Fuel System Cleaning Machine for Gasoline 1,495.00
Includes:
200-3000 Basic Adaptor Kit
200-3009 Euro/Asia Kit
User Guide
One Year Warranty
16" x 15" x 38" (82 lbs)
40.6cm x 38.1cm x 96.5cm (37.2 kg)
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
26
PART # DESCRIPTION COST
------ ----------- ----
500-4000i IDT-4000i Fuel System Cleaning Machine for Diesel 1,650.00
Includes:
200-3040 Adaptor Kit
User & Service Guide
One Year Warranty
23 1/4" x 18" x 39 1/2" (98 lbs.)
59.0cm x 45.7cm x 100.3cm (44.5 kg)
200-3006 U.S. Ford Adaptor Kit 315.00
200-3008 U.S. G.M. Adaptor Kit 197.00
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
27
EXHIBIT B
---------
CARBONCLEAN REPLACEMENT PARTS PRICING
-------------------------------------
SERIES 200 & 300
PART # DESCRIPTION PRICE
------ ----------- ------
010-0005B XOLOX SHIELD 15.65
010-0006B TANK CAP 7.75
010-0007B P-200 CASTER 9.50
010-0008B P-200 HANDLE 18.75
010-0009B TANK RESERVOIR 105.00
010-0017B ECS 300i OVERLAY 28.25
010-0019B ECS HANDLE 45.00
010-0020B ECS AXLE 23.70
010-0021B ECS WHEEL 12.55
010-0022B ECS BASE LEG 14.60
010-0024B ECS HOSE BRACKET 11.80
010-0025B ECS CORD BRACKET 14.05
020-0010B BUZZER 18.00
020-0030B EXTERNAL WIRING HARNESS 25.00
020-0035B 5 AMP CIRCUIT BREAKER 7.05
020-0037B 10 AMP CIRCUIT BREAKER 7.05
020-0038B 15 AMP CIRCUIT BREAKER 7.05
020-0040B INTERNAL WIRING HARNESS 60.00
020-0063B ELEC. LAMP AMBER 4.75
020-0067B ELEC. LAMP WHITE 4.75
020-0073B ELEC. LAMP GREEN 4.75
020-0083B ELEC. LAMP RED 4.75
020-0090B RELAY 8 TRIM, EAR MOUNT 18.65
020-0100B ONOFF & PS/LEAK SWITCH 4.20
020-0110B PURGE SWITCH, 1/2 MT 6.30
020-0120B START SWITCH, 1/2 MT 11.55
020-0150B TIMER 60 MIN 3/8 W/NUT 26.80
020-0151B TIMER FACE PLATE 3.05
020-0152B TIMER KNOB BLACK 1.75
020-0374B STRAIN RELIEF 1/2 MT 0.25
030-0002B X.XXXX 1/4 X 1/8 FPT NI 2.18
030-0004B P-200 FM UNION 5/16 X 1/4 NT (NY) 6.55
030-0005B MALE ELBOW 1/4 X 1/4 MPT 2.50
030-0006B MALE ELBOW 1/4 X 1/8 MPT 2.18
030-0013B HEX NIPPLE 1/4 P NI 1.45
030-0015B MALE ELBOW 5/16 X 1/8 MPT NY 5.25
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
28
PART # DESCRIPTION PRICE
------ ----------- -----
030-0016B X. XXXX 5/16 X 1/8 MPT NY 2.55
030-0017B X. XXXX 5/16 X 1/4 MPT NY 2.65
030-0020B X. XXXX 3/8 X 1/4 MPT NAB NI 2.33
030-0021B ECS F CONN 5/16 X 1/8 FPT NI 2.40
030-0022B X. XXXX 5/16T X 1/4 P NI 3.30
030-0023B X. XXXX 5/16T X 1/4 P NI 2.35
030-0024B M. ELBOW 5/16T X 1/8 NI 2.75
030-0025B X. XXXX 3/8T X 1/4P NI 2.90
030-0026B ECS X. XXXX 1/4 XXXX X 1/8 NI 2.20
030-0030B X. XXXX 3/8 X 1/4 FPT NI 2.89
030-0031B ELBOW 1/4 MPT X 1/4 FPT NI 2.26
030-0050B X. XXXX 3/8 X 1/8 MPT NI 2.56
030-0090B X-000 XXXXXXXX XXXXX 0 XXX 0/0 XXX 8.50
030-0095B XXX XXXXXXXX XXXXX, 0 XXX 0/0 6.25
030-0100B X-000 XXXXXXXX XXXXX-0 XXX 1/8 10.50
030-0105B ECS JUNCTION BLOCK-5 WAY 1/4 8.25
030-0130B MALE ELBOW 3/8 X 1/4 MPT NI 3.10
030-0131B FEMALE ELBOW 3/8 X 1/4 MPT NI 4.39
030-0140B MALE ELBOW 3/8 X 1/8 MPT NI 2.91
030-0150B MALE ELBOW 5/16 X 1/4 MPT NI 2.88
030-0160B X. XXXX 5/16 X 1/8 MPT NI 2.09
030-0189B X. XXXX 1/4 FPT X MPT NI 1.95
030-0192B COMP ALIGN NUT 5/16 0.97
030-0205B P-200 CROSS 1/8 FPT NI 3.97
030-0206B CROSS 1/4 FPT NI 6.31
030-0208B X. XXXX 3/8 X 1/4 MPT NI 3.96
030-0209B TEE 3/8 NT X 1/4 MPT X 3/8 (NY) 7.70
USED WITH VACUUM SWITCH
030-0210B UNION 1/8 MPT X 1/4 MPT (NY) 1.06
030-0211B X. XXXX 90 3/8 X 1/4 FPT NY 6.12
040-0401B XOLOX PUMP MOUNT NUT 0.05
040-0500B ECS GRAB HANDLE LOCKWASHER 0.05
040-0502B ECS "E' CLIP FOR AXLE 0.10
040-0503B ECS AXLE SPACER 0.45
040-0505B ECS GRAB HANDLE NUT 0.05
040-0506B ECS LEG CAP 0.20
040-0507B ECS AXLE BUSHING NY 0.15
040-0508B ECS VAC HOSE SNAP BUSHING 0.10
040-0509B ECS GRAB HANDLE BOLT 0.10
040-5326B 3/32 X 4 NYLON CABLE TIE 0.05
050-0008B VACUUM SWITCH 1/4 MPT 61.75
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
29
PART # DESCRIPTION PRICE
------ ----------- -----
050-0010B PSI GAUGE 34.75
050-0011B BAR GAUGE 37.45
050-0012B ECS VACUUM GAUGE 37.45
050-0013B ECS BAR VACUUM GAUGE 38.75
050-0015B 3 WAY SOLENOID 3/32 68.52
050-0017B PRESSURE SWITCH 1/8 46.75
050-0021B STAINLESS CK VALUE 78.63
050-0052B REG NEEDLE VALVE 50.00
050-0065B CONTROL VALVE 45.00
050-0074B FILTER, INLINE 14.95
050-0075B FILTER, SPIN-ON 15.95
050-0076B FILTER & BASE 1/4 FPT 56.90
050-0088B RELIEF VALVE 105 PSI 74.48
060-0440B HOSE CLAMP 1.40
060-0450B HOSE CLAMP 1.50
060-1000B 1/4 MALE TUBE ADAPTOR 9.24
060-1100B 5/16 MALE TUBE ADAPTOR 9.94
060-1200B 3/8 MALE TUBE ADAPTOR 10.64
060-1300B 1/4 FEMALE ADAPTOR (Open-end hose) 7.21
060-1400B 5/16 FEMALE ADAPTOR (Open-end hose) 7.42
060-1500B 3/8 FEMALE ADAPTOR (Open-end hose) 7.63
060-1600B 12 MM BANJO 21.70
060-1700B 90 TUBE 5/16 MPT FUEL INLET ADAPTOR 16.10
060-1800B 90 TUBE 3/8 MPT FUEL INLET ADAPTOR 15.61
060-1900B 12 MM BANJO BOLT 8.00
060-1901B 12 MM WASHER 0.42
060-1902B 12 MM CAP NUT 4.00
060-2000B 5/16 LOOP MALE ADAPTOR 7.07
060-2100B 3/8 PLUG COLLAR 3.57
060-2101B 3/8 CARB PLUG ADAPTOR 9.31
060-2200B 5/16 PLUG COLLAR 2.38
060-2201B 5/16 CARB PLUG ADAPTOR 9.31
060-2300B 14 MM FEMALE 13.58
060-2400B 1C MM BANJO 16.80
060-2401B 8 MM BANJO 16.24
060-2402B 14 MM BANJO 22.82
060-2501B FQD LOOP ADAPTOR 37.00
060-2502B TEE 40.80
060-2600B 16 MM FEMALE 14.98
060-2700B 14 MM X 16 MM MALE UNION 13.30
060-2710B 8 MM BANJO BOLT 10.60
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
30
PART # DESCRIPTION PRICE
------ ----------- -----
060-2711B 8 MM WASHER (Set of 3) 0.28
060-2720B 10 MM BANJO BOLT 11.90
060-2800B 1/4 MALE CONNECTOR (Ford,GM,Chrysler,Jeep) 19.67
060-2900B 5/16 MALE NYLON (Ford,Lincoln,Mercury) 19.67
060-3000B 1/8 MPT ADAPTOR (Ford,Lincoln,Mercury) 9.87
060-3100B TBI & PFI INLET (GM) 21.00
060-3105B FEMALE SIDE OF 3100 (GM) 19.32
060-3200B 1/4 MPT ADAPTOR (Ford,Lincoln,Mercury) 9.87
060-3300B TBI & PFI OUTLET (GM) 22.86
060-3304B TBI & PFI USED W/1700 (GM) 9.95
060-3305B FEMALE SIDE OF 3300 (GM) (Replaces 060-4000) 19.32
060-3500B 3/8 MALE ADAPTOR (Ford,Lincoln,Mercury) 34.26
060-3505B 3/8 FEMALE ADAPTOR (Ford,Lincoln,Mercury) 19.74
060-3508B XXXXXXX VALVE (Ford,Lincoln,Mercury) 13.68
060-3600B 1/2 MALE ADAPTOR (Ford,Lincoln,Mercury) 34.56
060-3605B 1/2 FEMALE ADAPTOR (Ford,Lincoln,Mercury) 20.72
060-3700B XXXXXXX VALVE (GM,Chrysler,Jeep) 17.92
060-3800B VOLVO ADAPTOR 16.80
060-3900B 5/16 FQD (Ford,Lincoln,Mercury) 18.62
060-3901B 3/8 FQD (Ford,Lincoln,Mercury) 14.91
060-3902B 1/4 FQD (Ford,Lincoln,Mercury) 14.70
060-4100B HYUNDAI ADAPTOR 34.93
060-4200B 5/16 MALE METAL (GM,Chrysler,Jeep) 19.67
060-4205B 5/16 FQD (GM,Chrysler,Jeep) 19.10
060-4300B 3/8 MALE CONNECTOR(Ford,GM,Chrysler,Jeep) 19.67
060-4305B 3/8 FQD (GM,Chrysler,Jeep) 14.70
060-4405B 1/4 FQD (GM,Chrysler,Jeep) 19.67
070-0080B 1/4 NYLON TUBE 0.82ft
070-0085B 5/16 NYLON TUBE 1.18ft
070-0086B 3/8 NYLON TUBE 1.56ft
070-0100B HOSE VACUUM 0.75ft
080-0230B 1/4 FPT FQD NI 12.65
080-3301B O-RING VITON USED w/3304 0.55
080-3302B SM. O-RING VITON Used w/3300,3304 0.55
080-3402B LG. O-RING VITON Used w/3100,3500,4100 0.50
080-3501B SMALL CLIP & TETHER (Ford,Lincoln,Mercury) 4.00
080-3601B LARGE CLIP & TETHER (Ford,Lincoln,Mercury) 4.00
080-3602B O-RING VITON Used w/3600 0.60
080-3701B VITON SEAL,3700 4.25
080-3903B 5/16 RETAINER (Ford,Lincoln,Mercury) 0.30
080-3904B 3/8 RETAINER (Ford,Lincoln,Mercury) 0.30
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
31
PART # DESCRIPTION PRICE
------ ----------- -----
080-3905B 1/4 RETAINER (Ford,Lincoln,Mercury) 0.40
080-4206B 5/16 RETAINER (GM,Chrysler,Jeep) 0.75
080-4306B 3/8 RETAINER (GM,Chrysler,Jeep) 0.80
080-4408B 1/4 RETAINER (GM,Chrysler,Jeep) 0.70
100-0090B ECS INTERNATIONAL MANUAL
100-0300B CHINESE OVERLAY 28.00
100-0104B FUEL INJECTOR PULSER IT100 (MQ) 144.00
100-4047B SPANNER NUT 5.00
100-4048B SPANNER WRENCH 12.00
100-5001B ICS TUBING (30") 0.75
200-0006B P-200 LOW FM ASSEMBLY 20.75
200-0007B P-200 HIGH FM ASSEMBLY 21.80
200-0011B P-200 BAR GAUGE ASSEMBLY 39.65
200-0050B P-200 2-WAY BLOCK ASSEMBLY 9.40
200-0064B P-200 5-WAY ASSEMBLY 119.31
200-0076B P-200 OUTPUT REGULATOR ASSEMBLY
(All"D"machines) 231.72
200-0083B P-200 RETURN REGULATOR ASSEMBLY 53.00
200-0093B TEE ASSEMBLY 16.35
200-0200B IN-LINE FILTER ASSEMBLY 14.95
200-0203B FILTER & TANK 5/16" ASSEMBLY 150.00
200-0204B XXXXXXX FILTER & TANK 3/8" ASSEMBLY 160.00
200-0280B P-200 VACUUM SWITCH ASSEMBLY 62.95
200-0300B ECS/P-200 RETURN HOSE ASSEMBLY 27.00
200-0400B ECS/P-200 OUTPUT HOSE ASSEMBLY 27.00
200-0704B XXXXXXX PUMP 5/16" ASSEMBLY
(With plumbing fittings) 215.00
200-0705B XXXXXXX PUMP 3/8" ASSEMBLY
(With plumbing fittings) 215.00
200-0706B XOLOX PUMP ASSEMBLY
(With plumbing fittings) 215.00
200-0800B P-200 CONTROL VALVE ASSEMBLY 50.00
200-1002B ECS BAR GAUGE ASSEMBLY 39.95
200-1004B ECS BAR VACUUM GAUGE ASSEMBLY
200-1008B ECS 2-WAY ASSEMBLY 9.20
200-1010B ECS 5-WAY ASSEMBLY 198.50
200-1011B ECS OUTPUT REGULATOR ASSEMBLY 256.00
200-1012B ECS RETURN REGULATOR ASSEMBLY 53.00
200-1013B ECS CONTROL VALVE ASSEMBLY 50.00
200-1014B ECS TEE ASSEMBLY 20.45
200-1175B FUEL QD TOOL KIT 19.95
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
32
PART # DESCRIPTION PRICE
------ ----------- -----
200-3000B BASIC ADAPTOR KIT 325.00
200-3006B FORD ADAPTOR KIT 315.00
200-3008B GM ADAPTOR KIT 197.00
200-3009B ASIAN/EURO ADAPTOR KIT 263.00
200-4007B TIMER ASSEMBLY 31.60
200-4008B FILTER & BASE 3/8" ASSEMBLY 59.55
200-4009B FILTER & BASE 5/16" ASSEMBLY 58.25
200-5000B SOLENOID REPAIR KIT 35.00
200-8009B P-200 REGULATOR RETROFIT 60.00
300-3000B BASIC ORGANIZER BAG (GREEN) 22.95
300-3006B FORD ORGANIZER BAG (RED) 22.95
300-3008B GM ORGANIZER BAG (BLUE) 22.95
300-3009B ASIAN/EURO ORGANIZER BAG (ORANGE) 22.95
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
33
EXHIBIT B
---------
IDT 4000I REPLACEMENT PARTS PRICING
-----------------------------------
PART # DESCRIPTION PRICE
------ ----------- -----
010-0034B TANK CAP 15.00
010-0026B WHEEL 12.50
010-0037B LEG 25.00
010-0040B FOOT GLIDE 3.75
010-0461B LOWER SENDING UNIT ADAPTOR 12.50
020-0049B ALARM HORN 22.50
020-4045B LOWER SENDING UNIT 81.25
020-0043B ELECTRICAL HARNESS, LOWER UNIT 12.50
020-0045B ELECTRICAL HARNESS, INTERNAL MAIN 87.50
020-0046B ELECTRICAL HARNESS, EXT. BATTERY 25.00
020-0047B ELECTRICAL HARNESS, EXT. SHUTDOWN 37.50
020-0091B RELAY 18.95
050-0018B PRESSURE SWITCH 50.00
050-0044B HYDRAULIC PUMP 12v (Diesel) 121.25
050-0086B FILTER ELEMENT REPLACEMENTS (20) 125.25
060-0590B FQD (Supply Tank) 24.96
060-0592B MQD (Supply Tank) 17.19
080-0230B FQD (Hose End) 12.65
100-0200B CHINESE OVERLAY 28.00
200-1471B OUTPUT HOSE ASSEMBLY 45.50
200-1472B RETURN HOSE ASSEMBLY 45.50
200-1960B UNIVERSAL ADAPTOR KIT 368.30
200-4003B OUTPUT SOLENOID ASSEMBLY 54.70
200-4004B PUMP ASSEMBLY 201.80
200-4031B ELECTRONIC HEAD ASSEMBLY 676.81
200-4032B FILTER ASSEMBLY 151.56
200-4038B PRESSURE SWITCH ASSEMBLY 49.70
INITIAL: _____
_____
THIS AGREEMENT IS INVALID UNLESS ALL PAGES ARE INITIALED BY THE COMPANY AND THE
DISTRIBUTOR AND EXHIBITS A AND B ARE ATTACHED
34
