Exhibit 4(b)(ii).10(1)
Contract for Implementation
and Service Delivery of the
EHPT Billing Mediation Device
signed according to ss. 269, article 2 of Commercial Code between
EuroTel Bratislava, a.s.
and
Cap Gemini Ernst & Young
Slovensko, s.r.o
January 2001
--------------------
[LOGO] CAP GEMINI
ERNST & YOUNG
--------------------
Cap Gemini Ernst & Young Slovensko, s.r.o.
Xxxxxxxx xxxxx 00/X, 000 00 Xxxxxxxxxx
Tel.: x000-0-000 55 678
Fax: x000-0-000 55 680
LEN CAP GEMINI ERNST & YOUNG INTERNATIONAL
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation of EHPT Billing Device
Table of contents
1 Contractual parties.......................................................4
2 Introduction..............................................................5
3 Contract Documents........................................................5
4 Definitions...............................................................6
5 Time Schedule.............................................................7
6 Responsibilities of CGE&Y.................................................8
7 Responsibilities of EuroTel...............................................9
7.1 Organisational and facilities..........................................9
7.2 Business Requirements..................................................9
7.3 Test Data with Description.............................................9
7.4 Acceptance Test Specification.........................................10
7.5 Network and Hardware ready for Installation...........................10
7.6 Hardware..............................................................10
8 Change Requests..........................................................10
8.1 General...............................................................10
8.2 Agreement.............................................................10
9 Compensation and Payment Plan............................................11
9.1 Compensation..........................................................11
9.2 BMP RTC Software License Fee Structure................................14
9.3 Payment Plan..........................................................14
9.4 Time and Material Work................................................15
10 Warranty and Maintenance.................................................15
11 Representatives of the Parties...........................................16
12 Steering committee.......................................................16
13 Governing Law, Disputes..................................................17
14 Approvals................................................................18
Content Appendix I.........................................................20
1 EuroTel Objectives.......................................................22
1.1 High Level Requirements...............................................22
1.2 Scope of specification................................................22
1.3 Local Support.........................................................25
2 Scope....................................................................25
2.1 Software Licenses.....................................................25
2.2 Documentation.........................................................26
2.3 Training Services.....................................................26
2.4 Implementation Services...............................................27
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -2-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation of EHPT Billing Device
Content Appendix II........................................................36
ss. 1 Performance of the Services.........................................38
ss. 2 Acceptance of Delivery..............................................38
ss. 3 Remuneration........................................................38
ss. 4 Payment.............................................................39
ss. 5 Amendments and Alterations..........................................39
ss. 6 Title etc...........................................................39
ss. 7 Secrecy.............................................................40
ss. 8 Warranty............................................................41
ss. 9 Liability...........................................................42
ss. 10 Infringement of Intellectual Property Rights.......................43
ss. 11 Force majeure......................................................43
ss. 12 Termination........................................................45
ss. 13 Disputes...........................................................45
ss. 14 Applicable law.....................................................45
ss. 15 Severability.......................................................45
ss. 16 Waiver.............................................................46
Content Appendix III.......................................................48
1 Introduction.............................................................51
2 System Overview..........................................................52
2.1 Collection, Processing and Distribution...............................52
2.2 EHPT BMP Definitions..................................................53
2.3 BMP Overview..........................................................54
2.4 BMP IP Overview.......................................................56
2.5 BMP for convergence...................................................57
3 BMP......................................................................59
3.1 Using BMP.............................................................59
3.2 Collection............................................................60
3.3 Processing............................................................62
3.4 BMP, Additional Functionality.........................................77
3.5 Tools - Implementation and Adaptation.................................80
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -3-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation and Delivery of EHPT Billing Mediation Device
1 Contractual parties
EuroTel Bratislava a.s
Xxxxxxxxxxx 00
Xxxxxxxxxx, 000 00
Xxxxxx Xxxxxxxx
ICO: 35705019
DIC: 35705019/600
Bankove spojenie XX, Bratislava
(in following "Eurotel" or "client")
represented by
Xx. Xxxxx Xxxxx, Chief Executive Officer/Procurator and
Xx. Xxxxxx Xxxxxx, Chief Financial Officer/Procurator
and
Cap Gemini Ernst & Young Slovensko, s.r.o.
Xxxxxxxx 00/X
Xxxxxxxxxx, 000 00
IEO 35 741 538
DIE 35 741 538/600
Bankove spojenie, Tatra banka, a.s., Bratislava, Mileticova ul.,
Account Nr. No. 28 21 00 00 66 /1100
represented by
Xx. Xxxxxxxxx Xxxxxx, Managing Director and
Mr. Elemir Xxxxxx, Procurator
Correspondence address
Cap Gemini Ernst & Young Slovensko, s.r.o.
Xxxxxxxx 00/X
Xxxxxxxxxx, 000 00
(in following "Cap Gemini Ernst & Young Slovensko, s.r.o." or
"CGEY")
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -4-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation and Delivery of EHPT Billing Mediation Device
EuroTel Bratislava a.s. and Cap Gemini Ernst & Young Slovensko s.r.o., have
today entered into the following agreement regarding performance of project
work.
2 Introduction
This Agreement covers the delivery by CGE&Y of a Billing Mediation Device, a
software tool for a telecommunications operator, to EuroTel.
The scope of delivery under this Agreement consists of software license for the
product BMP, consultancy services, training and documentation as defined in
Appendix 1 to this Agreement.
The time schedule for the delivery is specified in ss.5 of this Agreement.
The compensation to be paid by EuroTel to CGE&Y for the delivery under the
Agreement is specified in ss.9 of this Agreement.
General terms and conditions for the delivery are specified in Appendix 2 to
this Agreement.
CGE&Y undertakes to deliver the scope of delivery regarding the product BMP from
the third party supplier EHPT in accordance with the conditions laid down in
this agreement. BMP is specified in Appendix 3 to this Agreement.
3 Contract Documents
The Agreement between the parties is included in the following contractual
documents.
o Contract for Implementation and Delivery of the EHPT Billing
Mediation Device
Appendixes to the contract:
- Scope of delivery, Appendix 1
- General Terms & Conditions Responsibility Projects, Appendix 2
- BMP 4.1 Product Description, Appendix 3
o BMP Sub-license Agreement, plus Appendixes
The above mentioned "General Terms & Conditions Responsibility Projects" are
applicable on the commission and become, like the other Appendixes,
automatically part of the Agreement at the signature of the agreement.
The BMP Sub-license Agreement shall be considered separate contract including
obligations and responsibilities specific to the particular scope of that
contract. The BMP Sub-Licence Agreement shall regulate the terms and conditions
upon which the rights to Software as described therein are provided to EuroTel.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -5-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation and Delivery of EHPT Billing Mediation Device
The documents support each other. In case of conflict between different
documents they shall apply in the order stated above.
4 Definitions
In this Agreement and its Appendixes the following items shall have the meanings
explained in this paragraph.
Active Backup means an on-line BMP system installed and running on a
separate server, configured as the operational BMP
system. The Active Backup receives the same data and
performs the same data handling as the operational BMP
system. In case of operational BMP system failure the
Active Backup can replace the operational system within
minutes.
Agreement means this Main Agreement, agreed and signed between the
Parties including Appendixes.
BMD means Billing Mediation Device
BMP means a multi-service Mediation Device system from EHPT
that provides Telecom Operators, such as EuroTel, with a
solution to collect, process and distribute service
usage data in all networks
CDR A CDR is defined as an incoming call data record.
Outgoing call data records are not considered.
Cold Backup means a BMP system installed on a separate server,
configured as the operational BMP system. In case of
operational BMP system failure the Cold Backup can
replace the operational system within hours.
Documentation means functional specifications, system development
documentation, and project documentation, as specified
in the Agreement documents.
EHPT means the company that has an office at Johan
Wellinsgatan 6 in Goteborg, Sweden. EHPT has developed
the Software and is delivering the Software to CGE&Y as
a sub-supplier
Hardware means all server hardware necessary to run the Software
Manuals means user manuals and operations manuals.
Order Date is defined as the date of signature of this Agreement
and of the BMP Sub-license agreement
RTC means right to connect
RTU means right to use
Services means the services to be provided by CGE&Y for the
integration and installation of the Software, assistance
to test the System, Training, Project Management, as
well as Supplier Management of third party suppliers.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -6-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation and Delivery of EHPT Billing Mediation Device
Software means the EHPT BMP 4.1 Mediation Device Software,
further defined in section 2.1, Software Licenses, in
Appendix 1 to this Agreement
Subscriber A basic rule (for fixed and mobile subscribers): A
subscriber is defined to be the number of telephone
numbers from active users that generate CDR's managed by
the Operator. Thus in the residential case, there may be
one or two telephones for each residential user. A large
corporate subscriber though (even though they are one
corporate subscriber) will actually have many telephone
numbers in their VPN and it is these
subscribers/telephone numbers that should be used in the
RTC calculation.
System means all Hardware and Software
VPN means Virtual Private Network
5 Time Schedule
This section contains the time schedule for CGE&Y BMP implementation project.
Only one milestone is contractual from CGE&Y and that is "Ready for Acceptance
Test".
The project time plan could be divided into four main phases, Implementation
Analysis, Implementation, HW/SW Installation & Configuration and Acceptance
Test. These four phases are divided into ten Work Packages (WP) which in its
turn is divided into several activities and sub-activities. The Work Packages
are more closely described in section 2.4 in Appendix I of this document. The
time plan also identifies project milestones which are to be met during the
project. For the implementation project the following set of milestones has been
set up.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -7-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation and Delivery of EHPT Billing Mediation Device
--------------------------------------------------------------------------------
Project Milestones Date
--------------------------------------------------------------------------------
Project start January 15th, 2001
--------------------------------------------------------------------------------
Test Data available January 19th, 2001
--------------------------------------------------------------------------------
All Requirement Input provided March 9th, 2001
--------------------------------------------------------------------------------
Implementation Analysis Report agreed & signed March 16th, 2001
--------------------------------------------------------------------------------
Acceptance Test Procedure approved March 16th, 2001
--------------------------------------------------------------------------------
Implementation and Development ready May 11th, 2001
--------------------------------------------------------------------------------
Acceptance Test Specification approved May 11th, 2001
--------------------------------------------------------------------------------
Acceptance Test Data available May 16th, 2001
--------------------------------------------------------------------------------
HW and Network Ready for Installation May 16th, 2001
--------------------------------------------------------------------------------
Ready for Acceptance Test June 4th, 2001
--------------------------------------------------------------------------------
Acceptance Test finalised June 13th, 2001
--------------------------------------------------------------------------------
Final Acceptance & Certificate signed June 15th, 2001
--------------------------------------------------------------------------------
EuroTel put System into production June 18th, 2001
--------------------------------------------------------------------------------
Project end June 28th, 2001
--------------------------------------------------------------------------------
Provided that EuroTel fulfils its obligations according to the table of EuroTel
Milestones and the EuroTel's responsibilities listed ss.6, the following
milestones shall be met by CGE&Y.
--------------------------------------------------------------------------------
CGE&Y Milestones Date
--------------------------------------------------------------------------------
Project start January 15th, 2001
--------------------------------------------------------------------------------
Ready for Acceptance Test June 4th, 2001
--------------------------------------------------------------------------------
--------------------------------------------------------------------------------
EuroTel Milestones Date
--------------------------------------------------------------------------------
Final acceptance June 15th, 2001
--------------------------------------------------------------------------------
Start of Production June 18th, 2001
--------------------------------------------------------------------------------
6 Responsibilities of CGE&Y
CGE&Y shall perform the commission in accordance with this Agreement including
agreed Appendixes.
CGE&Y shall perform the project work professionally and in accordance with
normal usage and standards in the area and with personnel having the necessary
skills for the commission.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -8-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation and Delivery of EHPT Billing Mediation Device
7 Responsibilities of EuroTel
The following activities are the responsibility of EuroTel to carry out during
the project delivery.
7.1 Organisational and facilities
o Provide appropriate facilities for training arranged at EuroTel's
premises.
7.2 Business Requirements
During the Implementation Analysis the EuroTel requirements are broken down to
the level of exactly what needs to be provided in the Mediation Systems. In
order to succeed with the Implementation Analysis, all critical and major input
must be provided at a specific date. All requests by CGE&Y for information must
be precise, specific in detail, and well documented. EuroTel must be given
sufficient amount of time to investigate and prepare a response
This includes, but is not limited to:
o Provide Format descriptions of CDR formats that must be handled by
BMP.
o Provide File Format descriptions of CDR files to be handled by BMP.
o Describe the Business rules that must be handled by the BMP System.
o Describe Business Case Scenarios.
o Describe the rules for the collection functions that need to be
implemented in the BMP System (e.g. file-naming format, archiving
requirements, scheduling, etc.).
o Describe the rules for the distribution functions that need to be
implemented in the BMP System (e.g. scheduling, file-naming format,
notification, etc.).
o To provide description of important fields and values that are
required to be handled by the Processing functionality.
o Describe internal/external tables that BMP will need to access and
under which condition.
o Describe all external interfaces that the BMP will need to handle in
terms of Collection, Distribution, Notification, Access, etc.
o Attend the training as described in Appendix 1.
7.3 Test Data with Description
In order to start implementation EuroTel needs to make test data available to
CGE&Y.
A full set of test data for all defined Business cases can be supplied later on
in the project. The time-schedule for this is to be agreed between the two teams
project managers in writing.
All test data supplied to CGE&Y needs to include actual CDR data along with a
description of the traffic cases and Business cases covered by the test data.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -9-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation and Delivery of EHPT Billing Mediation Device
7.4 Acceptance Test Specification
The Acceptance test specification is to be executed during customer Acceptance
tests by EuroTel and by CGE&Y in their internal System Integration Tests.
7.5 Network and Hardware ready for Installation
Before CGE&Y can install the BMP System at the EuroTel's site, the site must be
prepared for this installation. This includes such items as the X.25
connections; LAN connections, etc. and that they are available and configured so
that BMP can be properly configured. It also includes, that the Hardware is at
site, necessary operating systems installed and physically attached to the
network and ready for BMP installation.
o In addition, EuroTel must prove connectivity to all network
elements.
o All these requirements are listed in a document to be filled out by
CGE&Y and signed by EuroTel.
o Network configuration experts available
7.6 Hardware
No hardware is provided by CGE&Y under this Agreement unless agreed otherwise in
writing. A document will be prepared by CGE&Y during the Implementation Analysis
(WP2) stating the SUN hardware that EuroTel should acquire.
8 Change Requests
8.1 General
Both parties have the right to initiate procedures for change requests (CR)
during implementation, delivery and test as lined out in this Main Agreement and
the right to accept or refuse any offer following such change request.
8.2 Agreement
After formal approval, in writing, of the specifications, prices and schedule,
the implementation of the amendment will be performed. If not otherwise agreed
specifically, CGE&Y shall be entitled to compensation on a time and material
basis in accordance to prices listed in paragraph 9.4 of this agreement. An
extension of time of delivery is only possible if clearly stated in the offer
and agreed by the EuroTel.
Should the performance of an agreed CR reduce the scope of services covered by
this agreement, for technical, feasibility or other reasons, then the fixed
price stated in paragraph 8.1 of this agreement shall be reduced by a
corresponding amount agreed between the parties. This reduction shall be
executed in the next scheduled instalment to be paid by EuroTel to CGE&Y.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -10-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation and Delivery of EHPT Billing Mediation Device
9 Compensation and Payment Plan
9.1 Compensation
For the delivery in this agreement EuroTel shall pay remuneration to CGE&Y with
a fixed price of 1.045.300 EUR (one million forty-five thousand three hundred
Euro). The fixed price comprises the following items:
--------------------------------------------------------------------
Prod Id BMP Implementation Project Price Euro
====================================================================
10625 EHPT BMP 4.1, RTU. 110.700
--------------------------------------------------------------------
203566/1 RTC for up to 1 000 000 incoming
CDR's per day 200.000
--------------------------------------------------------------------
203 542/2 or Ericsson AXE/MTP or FTAM collector 44.700
203 534/2
--------------------------------------------------------------------
203 531/2 FTP Collector 0
--------------------------------------------------------------------
203 550/2 FTP Distributor 0
--------------------------------------------------------------------
N/A Implementation Services 550.000
--------------------------------------------------------------------
10661 EHPT BMP High Availability RTU
license on two servers for
- Sun Cluster 2.2
- Veritas Volume Manager VxVM 3.04
- Veritas File System VxFS 3.3.3 81.800
--------------------------------------------------------------------
203 790/1 Training BMP Maintenance and Set-up 11.000
--------------------------------------------------------------------
N/A Travel expenses 47.000
====================================================================
Total Price in Euro 1.045.300
====================================================================
When purchased from CGEY, the licence prices for upgrades to the next release of
the EHPT BMP product will not exceed 20% of at the time of upgrade valid list
price of the next release. This price guarantee is valid for a period of two
years from date of signing this contract. The two year period will automatically
be renewed when an upgrade is purchased and provided that EuroTel has had
uninterrupted sequence of support agreement with CGEY. The maximum amount of
renewed two-year periods is five.
EuroTel will be informed by CGEY when the current release of the BMP product
will expire. CGEY will support the release during 12 months after the day of the
written information. During this period EuroTel will need to upgrade to the next
release or the support agreement will expire.
EuroTel is allowed to skip one release during each two-year period and the
license price for upgrades will not exceed 20% of at the time of upgrade valid
list price of the next-plus-one release.
Options
The following items can be ordered by EuroTel during the implementation project.
For options that require implementation services the change request procedure
will apply.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -11-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation and Delivery of EHPT Billing Mediation Device
The support and maintenance services (product id 10 273) shall be agreed in a
separate contract to be signed before final acceptance.
The BMP Test licence will be provided free of charge to EuroTel in the event
that a Framework Agreement is signed between T-Mobil and EHPT, in which
agreement there is included a clause for the provision of a free BMP test
licence and an Appendix listing the T-Mobil affiliates (among them EuroTel) who
may take advantage of the terms and conditions covered by the Framework
Agreement.
--------------------------------------------------------------------
Prod Id Options Price Euro
====================================================================
10 273 Support and maintenance during one year 81.000
--------------------------------------------------------------------
10 626 Enhanced processing development licence 46.700
--------------------------------------------------------------------
10 627 Format builder development licence 46.700
--------------------------------------------------------------------
203 603 BMP Test licence 38.000
--------------------------------------------------------------------
N/A BMP licence for cold back-up 10% of BMP
licence fee
--------------------------------------------------------------------
N/A BMP licence for active back-up 50% of BMP
licence fee
--------------------------------------------------------------------
The ,,BMP license fee" for the two back-up options is calculated as the sum of
the BMP licenses purchased by EuroTel excluding the RTC.
BMP IP
-------------------------------------------------------------------------------------------
Prod Id Options Price Euro
===========================================================================================
N/A Cluster implementation Services 20.000
-------------------------------------------------------------------------------------------
10 279 - EHPT BMP IP base system and User Documentation 33.000
- Collection
One eligible IP event collector, of the following:
RADIUS, TACACS+, WEB server, E-Mail, News or FTP
- Distribution
- Inter-BMP plus one eligible distributor, one of the
following:
- EHPT Net Charger or FTP
- Processing:
- Real time aggregation of IP events
- Real time filtering of IP events
- Usage Detail Record (UDR) creation
REQUIRES
Additional Licenses:
- RTC Product ID INF 203 681/1
Note that more IP event collectors can be added to this package.
If the required IP event collector is not within the eligible
one, use the price list for the BMP standalone sales packages.
The additional price must be added to the price of the BMP IP
package. Please contact EHPT sales response centre
for information.
-------------------------------------------------------------------------------------------
Radius AAA (Authentication, Authorisation and Accounting) 11.700
Server running Radius, "RTU on one server"
-------------------------------------------------------------------------------------------
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -12-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation and Delivery of EHPT Billing Mediation Device
-------------------------------------------------------------------------------------------
Prod Id Options Price Euro
===========================================================================================
TACACS+ AAA (Authentication, Authorisation and Accounting) 11.700
Server running TACACS+, "RTU on one server"
-------------------------------------------------------------------------------------------
Web Server Agent collector for web server "RTU on one server" 11.700
-------------------------------------------------------------------------------------------
e-mail Agent collector for e-mail server "RTU on one server" 11.700
-------------------------------------------------------------------------------------------
Cisco router running Netflow Netflow collector using UDP "RTU 45.900
on one server"
-------------------------------------------------------------------------------------------
Ascend VoIP Pre-Paid, Gatekeeper Ascend Gatekeeper, Pre-Paid 45.900
VoIP, using proprietary API. "RTU on one server"
-------------------------------------------------------------------------------------------
News Server Agent collector for News server "RTU on one 11.700
server"
-------------------------------------------------------------------------------------------
FTP Server Agent collector for FTP server "RTU on one 11.700
server"
-------------------------------------------------------------------------------------------
WAP Gateway Agent collector for WAP Gateway "RTU on one server" Quotation
provided
on request
-------------------------------------------------------------------------------------------
SNMP SNMP collector for MIB II Agents "RTU on one server" 45.900
-------------------------------------------------------------------------------------------
Cisco VoIP Cisco Pre-paid VoIP Gatekeeper "RTU on one server" 45.900
-------------------------------------------------------------------------------------------
The licensing of RTC is based on the number of subscribers
(end users)
-------------------------------------------------------------------------------------------
203 681/1 Number of end users 0-50 K 0
-------------------------------------------------------------------------------------------
Number of end users 0-100 K 58.200
-------------------------------------------------------------------------------------------
Number of end users 0-150 K 116.500
-------------------------------------------------------------------------------------------
Number of end users 0-200 K 174.700
-------------------------------------------------------------------------------------------
Number of end users 0-250 K 221.800
-------------------------------------------------------------------------------------------
Number of end users 0-300 K 257.600
-------------------------------------------------------------------------------------------
For additional 100 K end users above less than 4,000 K end users 23.500
-------------------------------------------------------------------------------------------
Number of end users 0-4000 K 1.120.000
-------------- ----------------------------------------------------------------------------
For additional 1,000 K end users above less than 20,000 K end
users 69.400
-------------------------------------------------------------------------------------------
Number of end users 0-20,000 K 2.240.000
-------------------------------------------------------------------------------------------
More than 20,000 K end users Quotation
provided
on request
-------------------------------------------------------------------------------------------
The prices for the Options listed above are valid for two years from signature
of this Agreement, on condition that the products are available from EHPT.
Should EHPT replace any of the products the replacements will be offered to
EuroTel at the then valid price list from EHPT.
9.2 BMP RTC Software License Fee Structure
When the amount of CDR's exceeds 1 000 000 EuroTel shall pay additional RTC
software license fees according to the table below.
-------------------------------------------------------------------------------------------
Prod Id Number of CDR's per 24 hours Price Euro
===========================================================================================
203566/1 1,000 K - 1,250 K 47.000
-------------------------------------------------------------------------------------------
1,250 K - 1,500 K 47.000
-------------------------------------------------------------------------------------------
For each addition of 500 K, in the range 1,500 K - 20,000 K 23.500
-------------------------------------------------------------------------------------------
After the termination of this agreement, EuroTel shall pay additional RTC
software license fees according to the then valid price list from EHPT.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -13-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation and Delivery of EHPT Billing Mediation Device
9.3 Payment Plan
The fixed price stated in ss.9.1 shall be paid by EuroTel in three instalments
according to the following payment plan:
-------------------------------------------------------
Project Milestone Fixed price instalment
=======================================================
Contract Date 40% of fixed price
-------------------------------------------------------
Ready for
Acceptance 30% of fixed price
-------------------------------------------------------
Final Acceptance 30% of fixed price
-------------------------------------------------------
When change requests have been agreed and ordered by EuroTel, the price for each
change request is added to the fixed price, forming the base for the payment
instalments.
Eurotel shall transfer the three instalments according to the payment plan to
the bank account No. 28 21 00 00 66 /1100 at Tatra banka Bratislava, Ref. BMP
Implementation. The transfer should be done within 30 days after EuroTel
receives the invoice according to the project milestones.
CGE&Y is entitled to issue the invoice subject to due, professional performance
of its contractual obligations under the respective milestone free from defects
(other than "minor defects" as defined in General Terms & Conditions) and not
earlier than occurrence of EuroTel's acceptance, if applicable.
9.4 Time and Material Work
There may be need for extra work during the project lifecycle. The parties have
agreed that the rates for Time and Material work that apply to this Agreement
are:
a) For CGE&Y Consultants from outside Slovak or Czech Republics, per day and
person:
Project manager 1.635 Euro
Business Consultant 1.480 Euro
Technical specialist and System Designer 1.340 Euro
Programmer 896 Euro
Travel expenses for CGE&Y Consultants from outside of Czech and Slovak Republics
are not included and will be charged separately.
b) For CGE&Y Consultants who are Slovak and/or Czech residents, per day and
person:
Project manager 1.000 Euro
Business Consultant 950 Euro
Technical specialist and System Designer 800 Euro
Programmer 600 Euro
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -14-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation and Delivery of EHPT Billing Mediation Device
All extra work shall be ordered separately by EuroTel in advance.
Hourly rates for CGE&Y Consultants are set to 1/8 (one eighth) of the daily
rates specified above.
10 Warranty and Maintenance
CGE&Y has sub-licensed BMP "as is" to EuroTel. CGE&Y warrants that the BMP
software has the functionality as specified in the Product Description in
Appendix 3. This warranty applies also to the functionalities that explicitely
has been configured and/or customised by CGE&Y for EuroTel and accepted by
EuroTel.
A six month warranty period is included for the deliverables from the
implementation project. The warranty period starts at Final Acceptance. The
warranty conditions are specified in Appendix 2 to this Agreement.
Should EuroTel, without the prior consent of CGE&Y, make changes in or take
measures with the system of such significance that the investigation of who is
responsible for Defects is considerably impeded, and then CGE&Y's responsibility
according to the Warranty ceases.
The warranty services shall be provided to EuroTel technically in compliance
with the manners, quality, procedures, timings, etc. as stipulated in a signed
and valid support and maintenance agreement; which manners, quality, procedures,
timings, etc. shall apply to warranty services accordingly.
CGE&Y is obliged to provide support and maintenance of the system covered by the
deliverables of this contract. Such support and maintenance is specified in the
BMP Support agreement. The support and maintenance contract will be signed
separately, however no later than at final acceptance of the delivery.
11 Representatives of the Parties
The representative of
The Client is: Xxxxx Xxxxx
CGE&Y is: Xxxxxxxxx Xxxxxx
The contact person of
The Client is: Xxxxx Xxxxxxxx
CGE&Y is: Xxxxx Xxxxxx
The representatives of the parties are entitled to formally represent the
respective party in matters concerning the performance of the commission.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -15-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation and Delivery of EHPT Billing Mediation Device
12 Steering committee
A steering committee shall be appointed that shall meet on a regular basis. The
representatives from EuroTel shall be IT and billing management. The CGE&Y
representatives shall be the Project Owner and Account Manager.
The steering committee shall have the authority to resolve any disputes that may
arise regarding the project in an amicable way. The venue of the meeting shall
be in Bratislava or in Stockholm.
The agenda for the meeting includes, but is not limited to the following topics:
o Review of project progress
o Review of change request status
o Review of invoices and payments
o Resolution of certain project issues
In addition, the steering committee will make suggestions regarding
enhancements, which may be desired to improve EuroTel's operations.
CGE&Y will write the minutes of meeting. The minutes of meeting shall be
approved by EuroTel.
13 Governing Law, Disputes
This contract shall be governed by, and construed in accordance with, the laws
of the Slovak Republic. Any dispute or discrepancy in the interpretation or in
the performance hereof, shall be resolved through mutual discussion. In the
event that such resolution of the dispute or discrepancy is not achieved within
20 days from the beginning of the dispute, any contractual party has the right
to propose court proceeding at a responsible court.
Issues, not covered by this contract shall be governed by and administrated in
accordance to legal regulations of Section 536 and following of the Commercial
Code on Contract on Work accordingly and of the other provisions of Civil Code
and Commercial Code.
Cap Gemini Ernst & Young Slovensko, s.r.o. guarantees to start the project
within 1 week from signing of the contract.
The parties hereof declare that they have read the wording of this contract
thoroughly and consistently, that they have understood its contents and that
this document expresses their free and serious will without mistakes. The
parties hereof acknowledge this by the signature of person fully authorised and
entitled to act on behalf of the parties hereof.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -16-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Implementation and Delivery of EHPT Billing Mediation Device
14 Approvals
This agreement comes into effect on signing by both parties.
Bratislava, March 2nd, 2001
---------------------------------- ----------------------------------------
Xxxxx Xxxxx Xxxxxxxxx Xxxxxx
Chief Executive Officer/Procurator Managing Director
EuroTel Bratislava a.s. Cap Gemini Ernst & Young Slovensko s.r.o.
---------------------------------- ----------------------------------------
Xxxxxx Xxxxxx Elemir Xxxxxx
Chief Finical Officer/Procurator Procurator
EuroTel Bratislava a.s. Cap Gemini Ernst & Young Slovensko s.r.o.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -17-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Scope of Delivery
APPENDIX I
Scope of Delivery
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -18-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Scope of Delivery
Content Appendix I
1 Contractual parties.......................................................4
2 Introduction..............................................................5
3 Contract Documents........................................................5
4 Definitions...............................................................6
5 Time Schedule.............................................................7
6 Responsibilities of CGE&Y.................................................8
7 Responsibilities of EuroTel...............................................9
7.1 Organisational and facilities..........................................9
7.2 Business Requirements..................................................9
7.3 Test Data with Description.............................................9
7.4 Acceptance Test Specification.........................................10
7.5 Network and Hardware ready for Installation...........................10
7.6 Hardware..............................................................10
8 Change Requests..........................................................10
8.1 General...............................................................10
8.2 Agreement.............................................................10
9 Compensation and Payment Plan............................................11
9.1 Compensation..........................................................11
9.2 BMP RTC Software License Fee Structure................................14
9.3 Payment Plan..........................................................14
9.4 Time and Material Work................................................15
10 Warranty and Maintenance.................................................15
11 Representatives of the Parties...........................................16
12 Steering committee.......................................................16
13 Governing Law, Disputes..................................................17
14 Approvals................................................................18
Content Appendix I.........................................................20
1 EuroTel Objectives.......................................................22
1.1 High Level Requirements...............................................22
1.2 Scope of specification................................................22
1.3 Local Support.........................................................25
2 Scope....................................................................25
2.1 Software Licenses.....................................................25
2.2 Documentation.........................................................26
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -19-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Scope of Delivery
2.3 Training Services.....................................................26
2.4 Implementation Services...............................................27
Content Appendix II........................................................36
ss. 1 Performance of the Services.........................................38
ss. 2 Acceptance of Delivery..............................................38
ss. 3 Remuneration.........................................................38
ss. 4 Payment.............................................................39
ss. 5 Amendments and Alterations..........................................39
ss. 6 Title etc...........................................................39
ss. 7 Secrecy.............................................................40
ss. 8 Warranty............................................................41
ss. 9 Liability...........................................................42
ss. 10 Infringement of Intellectual Property Rights.......................43
ss. 11 Force majeure......................................................43
ss. 12 Termination........................................................45
ss. 13 Disputes...........................................................45
ss. 14 Applicable law.....................................................45
ss. 15 Severability........................................................45
ss. 16 Waiver..............................................................46
Content Appendix III.......................................................48
1 Introduction.............................................................51
2 System Overview..........................................................52
2.1 Collection, Processing and Distribution...............................52
2.2 EHPT BMP Definitions..................................................53
2.3 BMP Overview..........................................................54
2.4 BMP IP Overview.......................................................56
2.5 BMP for convergence...................................................57
3 BMP......................................................................59
3.1 Using BMP.............................................................59
3.2 Collection............................................................60
3.3 Processing............................................................62
3.4 BMP, Additional Functionality.........................................77
3.5 Tools - Implementation and Adaptation.................................80
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -20-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Scope of Delivery
1 EuroTel Objectives
This section 1 provides a high level description of EuroTel's objectives
regarding the BMD.
1.1 High Level Requirements
The following bullet points cover the high level requirements of the BMD
solution required for EuroTel. They are as follows:
o Revenue assurance - full control of CDR's processing with auditable logs
of transactions from call collection through each step.
o Independence in BMD system from network elements output formats.
o Open architecture
o Preparation for seamless transition to HSCSD, GPRS, UMTS technologies.
o Easy expandability due to the modular structure of the BMD to make it easy
to meet the future growth both in terms of volume and new services
o The reduction in the number of 'extra' processing steps outside of the
core BMD functionality.
o No manual work, apart from normal system administration
o A high degree of error detection due to the automated validation.
o Seamless integration with the current systems and infrastructure
o Graphical user interface
o Development tools
o Monitoring features
o High availability of the system 24*7 operations
o Source code availability is included in the Scope of Delivery of the
specific EuroTel customizations that are delivered by the project.
o Single source for different applications required for CDR analysis e.g.
searching engine for security entities.
1.2 Scope of specification
By implementing the solution, EuroTel Bratislava intends to simplify the
processes and interfaces to be able to minimize or replace many of today's
components.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -21-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Scope of Delivery
The main interfaces for the BMD shall be:
Input
o Ericsson AXE MSC's (GSM1,2&3)
o Nokia Switches (NMT1&2)
o SMS centres (SMSC)
o Roaming (TAP3 from MACH & TAP2+ from EuroTel Prague)
Data from Network Elements is requested by polling and two types of
polling are included. One is set by the clock and the frequency can be
from one minute up to 24 hours. The other is event driven whereby the BMD
will fetch the CDR file right after it has been created in a directory.
Output
o SICAP replacement of CDR handler and DB loader. BMD will mediate
ASN.1 data to SICAP system.
o CDR Loader replacement- BMD will mediate data as input to
Interconnect, VOIP, Security and FDS system..
o BSCS interfacing RIH modul
The aim is also for the BMD to reduce the number of standard modules used in the
existing systems hence improving performance. The following BSCS processes will
be replaced:
- File Input Handler (FIH)
- Duplicate Record Handler (DRH)
- Assembled Input Handler (AIH)
By using a new BMD based on standard BMP mediation functionality, the following
utilities and programs will be realized within the solution:
o In-house developed CDR Collector
The present CDR Collector used by EuroTel will be replaced by the
standard BMP Collection functionality as defined in section
2.4.3.(WP3 Collector Set-up) and subsection Formatting in section
2.4.5. (WP5 Processing).
o Splitter
Filtering of post-paid and pre-paid CDRs will be handled using the
standard BMP processing nodes described in section 2.4.5. (WP5
Processing). Pre Paid Number Duplicity is not allowed: This is
supported by the Duplicate CDR Detection functionality which is a
standard processing node in BMP
o Voice Mail/Fax Mail converter
CDR based on Voice and Fax Mail activity will be processed and
converted to the required output format using standard BMP
processing nodes described in section 2.4.5 (WP5 Processing).
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -22-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Scope of Delivery
o SMS converter
CDR based on SMS activity will be processed and converted to the
required output format using standard BMP processing nodes described
in section 2.4.5 (WP5 Processing)
o TAP conversions
BMP can handle the TAP2+ and TAP3 formats and process such CDRs
using standard BMP processing nodes described in section (WP5
Processing).
o Star numbers
BMD will convert Star numbers to regular numbers and distribute them
to the BSCS system.
o Inter33calls (Voice over IP - VOIP)
BMD will convert Voice over IP numbers with prefix 33 to differerent
prefix based on criteria.
Following investigation during the implementation analysis (WP2), and, where
necessary, a separate quotation from CGE&Y, the following functionality (but not
limited to) may be included or enhanced above what already is part of the scope
of delivery in the BMD. The first 5 mandays of change request work are included
free of charge provided that they are ordered within the project delivery time.
o Functionality to handle Audio text services
o Assistant Services
o Others as will be specified in Implementation Analysis
The final picture, which is much more simple than that of today, uses the BMD as
the core of the future architecture. It is shown in the following diagram.
[GRAPHIC OMITTED]
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -23-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Scope of Delivery
The following specific requirements are not included in the Scope of this
Agreement:
- Fast access to the subscriber's calls history to allow real-time or
near-real-time control of the customer call behavior. Key for 'hot
billing', credit control, and fraud detection purposes. BMP includes a
batch interface to history data. The retrieval of data can be set to occur
at regular intervals. Hot billing is not included in the BMP Collection
module as provided under this Agreement.
1.3 Local Support
The first-line support will be delivered from the CGE&Y support office in
Bratislava. The first-line support staff in the Slovak Republic will benefit
from the second-line support by CGE&Y's Customer Services in Sweden as well as
Basic Support from EHPT.
In connection to the local support organisation CGE&Y aim to build an EHPT
competence centre responsible for the CGE&Y support to EHPT in the Central
European region.
2 Scope
This section lists the Scope of Delivery to be provided by CGE&Y under the
Agreement.
2.1 Software Licenses
CGE&Y will deliver the following software licenses:
2.1.1 EHPT BMP 4.1 Standard Software Package
License of BMP 4.1 Base System including Collection from disk, Processing,
Distribution to disk, Inter BMP collection and Inter BMP distribution. The
license consists of:
- RTU for eight (8) concurrent users on one (1) BMP server. Right To
Use (RTU) software licenses are based on delivered functionality and
on the number of servers.
- Connection License fees or Right to Connect (RTC) gives EuroTel the
right to connect up to five (5) Nodes to BMP and process up to 1 000
000 incoming CDR's per day. CDR's per day is calculated as the
average number of CDR's per day during one calendar month.
- One AXE/MTP or FTAM collector on one (1) BMP server
- One FTP collection on one (1) BMP server
- One FTP distribution on one (1) BMP server
- One EHPT BMP High Availability RTU license on two servers for
- Sun Cluster 2.2
- Veritas Volume Manager VxVM 3.04
- Veritas File System VxFS 3.3.3
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -24-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Scope of Delivery
2.1.2 EHPT BMP 4.2 Standard Software Package
If EuroTel has fulfilled all conditions in Enclosure 3, "Sub agreement BMP
licence", EuroTel is entitled to receive release 4.2 of BMP without having to
pay any additional licence costs. This Agreement does not cover implementation
of BMP release 4.2. Such services may be ordered separately from CGE&Y.
2.2 Documentation
One complete set of standard user documentation in English on paper will be
delivered. On-line help is available through HTML.
Project Specification (from step WP1)
Final Report and Change Request (from step WP1)
Analysis Report (from step WP2)
Operational Job Specification (from step WP2)
Draft of Acceptance test Specification (from step WP2)
Acceptance Test Specification (from step WP2)
System Test Specification (from step WP6)
2.3 Training Services
CGE&Y will deliver the following training services:
2.3.1 BMP Overview course, 1 day
The overview courses will be delivered at EuroTel's premises early in the
project. Suitable training for management-, financial- and other non operative
personnel that need a general understanding of the BMP System as well as for the
future users of the system. Number of participants unlimited.
2.3.2 BMP Maintenance and Set-up course (5 days) for 3 participants.
The course is intended for personnel who will work as BMP system administrators,
and those who will operate the system. For further information see Training
Service Description 1_1551_BMP Sys adm XxxX.doc.
The training is delivered at EHPT training premises. Student's expenses are not
included.
2.4 Implementation Services
CGE&Y will deliver the following implementation services listed in this section.
A BMP implementation project is divided into a number of activities called
work-packages (WP). Each work-package contains delimited tasks that more easily
could be surveyed.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -25-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Scope of Delivery
CGE&Y presents a work-package-plan for the BMP customer project for EuroTel in
this document. After that the Implementation Analyses the work package plan will
be revised and will also refer to the Implementation analysis document.
CGE&Y will perform an Implementation Analysis in the start of the implementation
project to identify the detailed requirements of the EuroTel.
During the implementation work, CGE&Y is responsible to set up all necessary
collection, processing and distribution to support up to twenty-five (25)
network elements.
2.4.1 WP1 - Project Set up and management
The purpose of this phase is to ensure that the project begins from a sound
business foundation.
The BMP-project management is responsible for the project activities such as
- Project management
- Customer meetings
- Progress reporting
- Project review
- Handling of project changes
WP output: Project Specification; Project time plan; Progress
report; Final report and Change request.
2.4.2 WP2 - Implementation Analysis
This WP is one of the most important work packages in which the customer
requirements are analysed in detail. This is a joint venture between EuroTel and
CGE&Y.
The Implementation Analysis Report together with the Operational Job Report that
is done after the analysis is the necessary input for the execution phase of the
project.
Activities:
Requirement identification regarding the EuroTel's network, IT systems and
business cases covering collecting, formatting, selection, validation,
distribution, Network, system and requirements etc.
Establish test data requirements. EuroTel is responsible to supply the needed
test data.
System analysis and design
Site inspection
Providing the acceptance test template to be used by EuroTel to adjust and
create the official acceptance test specification that will be used during the
project acceptance test phase.
WP input: Certain documents from WP1 approved.
WP output: Implementation Analysis Report; Operational Job
Report draft, draft of Acceptance test specification;
Acceptance test procedure sign off.
The number of change requests relating to the scope of services stated in
sections 2.4.3 through 2.4.11 of this
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -26-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Scope of Delivery
Enclosure will be listed and assessed. Change requests will be submitted to the
Steering Committee for approval to proceed and be managed in accordance with ss.
7 of the Agreement .
2.4.3 WP3 - Collector set-up
Set up work will be performed for the Standard FTP collector.
Activities:
Collector set up for Ericsson-AX10 via FTAM/MTP, Nokia-DX200 via FTP, SMSC via
FTP, VMS via FTP, TAP2+ over X.25
Additional to this disk collection is to be set up.
Documentation
WP input: Specification documents from WP2
WP output: Collection set up for maximum 25 Network Elements
(NE's). Input to Test-specification
2.4.4 WP4 - Distributor set-up
Set up work will be performed for the Standard FTP distributor.
Activities:
Distribution set up with TCP/IP; SICAP via FTP, BSCS (RIH), FDS via FTP,
Interconnect Billing via FTP, VoIP and Security.
Documentation
WP input: Specification documents from WP2
WP output: Distribution set up.
Input to Test-specification
2.4.5 WP5 - Processing
For each one of the processing nodes described below the following activities is
performed:
Activities:
Realisation of processing according to implementation analysis report Test data
definition
Job verification
Functional test
Documentation according to best industry practices for customised software
deliverables.
WP input: Operational Job Specification document from WP2
WP output: Processing node functionality
Input to Test-specification
Formatting
Formatting addresses the definition of formats for collection and distribution
of usage data from network elements to downstream systems.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -27-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Scope of Delivery
Activities:
- Source Format definitions of 5 input formats from the following
network elements: Ericsson-AX10 via FTAM/MTP, Nokia-DX200 via FTP,
SMSC via FTP, VMS via FTP, and TAP2+ over X.25. One unique format
per each of the network elements.
- Destination Format definitions of 6 formats with one unique format
for each of the above mentioned source and destination formats,
- Documentation
WP input: Documents from WP2
WP output: Defined formats and format mapping files.
Input to Test-specification
Selection
The selection function streams or filters CDR's to other processing nodes or to
a file for further distribution to an external system.
30 General selection nodes for six (6) different output streams to the PPS'
Validation
The validation function performs validation on usage data on two levels: format
validation and business rule validation.
6 Validation nodes for each input format:
Sequence Number Validation
The sequence number validation function performs validation on one defined
sequence field in the usage data.
The sequence number validation function determines the validity of the current
sequence field value in comparison with the previous CDR.
3 sequence validation nodes
Sequence Number Validation is a functionality that is based on that the switches
xxxx every CDR with a sequence number. This number can be checked by BMP and if
one or more CDR's that are "out of sequence" is detected BMP will log this in
the error log and/or stop the processing. Since each switch uses its own
sequence numbering this normally is a functionality used for each switch
separately.
Enhanced Processing
The Enhanced Processing Node makes use of a script language called TCL or Java.
The capability of using a programming facility enables BMP to implement
requirements that cannot be implemented using BMP Basic Processing.
It is assumed that a number of Basic Processing Nodes and Enhanced Processing
Nodes will be implemented in order to comply with EuroTel's requirements. A
detailed design of the solution will be agreed upon during the implementation
analysis and documented in the Functional Specification and the Operational Jobs
Report draft.
Enhanced Processing - Consolidation
Enables handling of partial CDR's, merge the partial CDR's belonging to the one
and same chargeable call into one CDR for further processing in billing system.
Consolidation solution for 1 input format
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -28-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Scope of Delivery
2.4.6 WP6 - System test
When all processing functionality has been implemented and functionality tested
a system test will be performed at development site. The test is performed
according to the test-specifications defined in implementation analysis and
processing implementation. Errors or unwanted phenomena will be noted in a test
report and corrected to sufficient functionality. The CGE&Y project manager
decides when the system test is finished.
Activities:
Test System set-up
Test data definition
System verification and test execution
Documentation
WP input: Test specification
WP output: Test report
2.4.7 WP7 - Customer training
The training of the EuroTel personnel is delivered under this WP. The training
is co-ordinated into the work package plan in order to prepare EuroTel skills in
good time for the acceptance test and the hand-over procedure.
Activities:
BMP training according to section 2.3
WP input: Number of participants
WP output: Trained personnel
WP8 - HW/SW integration
HW/SW Integration will see to that the delivered BMP system software is
installed and integrated on-site.
Configuration and setup services for the High availability licence are not
included. Such services can be ordered by EuroTel according to the procedure for
change requests
Activities:
OS-configuration
Oracle installation
BMP SW installation
Basic validation
WP input: BMP -system SW, Implementation customisations
WP output: Site ready for commissioning
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -29-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Scope of Delivery
2.4.8 WP9 - Commissioning
Commissioning addresses system set-up in the operational environment and
includes configuration and verification to ensure that the BMP system works
correctly in its environment.
The BMP system customisations are installed on-site and connected to the network
elements. CGE&Y initiates and carries out the commissioning and the purpose are
to prepare for the final acceptance test.
Activities:
BMP customisation installation
SW configuration and tuning
Establish pre-defined connectivity
Prepare for acceptance test
WP input: HW/SW Prepared BMP system
WP output: Ready For Acceptance
2.4.9 WP10 - Acceptance test
Acceptance Test addresses the formal acceptance of the system and is performed
by EuroTel with assistance from CGE&Y. Customisations and configuration of the
BMP system is tested using a predefined set of test cases and test data set up
at WP2.
When the system is accepted by EuroTel, EuroTel will sign the Certificate of
Final Acceptance (CFA).
To obtain final acceptance of the system, an acceptance test will be performed.
EuroTel is responsible for conducting the acceptance test.
The purpose of the acceptance test is to result in an approval of the delivery.
Approval of the delivery shall be executed or considered to be at hand, when any
of the criteria mentioned below and in the General Terms & Conditions
Responsibility Project has been fulfilled.
The parties shall agree on the contents of the acceptance test specification,
which shall contain a description of each planned test case and the desired
result. EuroTel's acceptance or rejection shall only depend upon the result of
the test cases specified in the acceptance test specification.
CGE&Y provides the acceptance test specification, including suggestions for test
material to be provided by EuroTel. EuroTel shall approve the acceptance test
specification. If EuroTel does not approve of the plan, objections must be
submitted to CGE&Y within one (1) week after reception. If no objection has
reached CGE&Y within one week, the acceptance test specification will be
considered approved. If EuroTel raises objections CGE&Y shall consider such
objections and adjust the test specification to a reasonable extent. In case of
rigorous objections or different opinions on the acceptance test specification
the issue shall be resolved by the Steering Committee in a meeting within seven
days from the moment
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -30-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Scope of Delivery
when EuroTel informs CGE&Y that EuroTel will not approve the acceptance test
specification proposed by CGE&Y. Should the Steering Committee fail to have the
parties to agree on the acceptance test specification then CGE& shall be
entitled to an extension of the delivery time. If the scope of the acceptance
test is increased CGE&Y shall analyse the consequences and inform EuroTel about
the extent of the required extension.
The acceptance test shall be completed within eleven days from CGE&Y's Delivery
for Acceptance.
CGE&Y shall correct defects discovered during the acceptance test or at the
delivery, provided that EuroTel has notified CGE&Y of the defect without delay.
Notified defects shall be categorised into three different types:
Severe Defects preventing further acceptance testing
Substantial Defects not preventing further acceptance test but necessary to
correct in order to take the system into operation
Minor Defects not preventing further acceptance testing or a meaningful
operation.
Severe and Substantial Defects shall be corrected before or during the
acceptance test. Delays in testing as a result of Severe and Substantial Defects
will extend the time for acceptance testing at CGE&Y's expense.
In the acceptance test a performance test shall be included. EuroTel and CGE&Y
shall agree on the hardware configuration that EuroTel will acquire, the level
of pre-defined performance criterias and test cases. If the stated performance
is not reached during the test CGE&Y shall take actions, without unreasonable
delay, to correct the problems identified. If the actions taken do not result in
passing of the performance test, CGE&Y will cover the cost necessary to upgrade
the hardware to a version that will make it possible to pass the performance
test. CGE&Y will also cover any costs related to software modifications or
purchase and installation of additional software and additional work that is
needed to pass the performance test.
All defects shall be corrected without unreasonable delay. Minor Defects shall
not prevent acceptance or approval and may be corrected during the warranty
period.
Defects and deficiencies that occur after the Final Acceptance shall be handled
according to the warranty conditions.
The acceptance will be completed when the Certificate of Final Acceptance (CFA)
is signed by EuroTel or it will be regarded as accepted and approved, as set out
in the General Terms & Conditions in Enclosure 2.
Activities:
Prepare site and participants for testing
Execute acceptance test according to Acceptance test procedure and Acceptance
test specification.
Signing of CFA
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -31-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Scope of Delivery
WP input: Acceptance test specification
WP output: CGE&Y delivery accepted
2.4.10 BSCS to BMP connection
The implementation of a connection between the BMP and BSCS software is included
in the scope of this agreement. The BMP will take over the CDR file conversion
to UTX format (conversion previously performed by the BSCS FIH batch process).
BMP will replace the FIH, DIH, DRH and AIH processes in BSCS.
Overview
The BMP collects CDR files from all MSC using the protocol for Ericsson and
Nokia switches. After converting CDR's to internal format the BMP needs to
perform all checks that the FIH used to perform. This is done during the
processing phase using TCL/JAVA programming. Then the CDR files will be
converted to UTX format and stored directly on the BSCS server.
Decoding
The BMP decoder converts CDR files from one Ericsson or Nokia format (agreed
from WP2) to the BMP internal format.
Processing
The BMP processing scripts (written in TCL/JAVA languages) will perform:
o Perform all checks that FIH used to perform (while converting input
CDR files to UTX format).
o Load the THUFITAB table with a new row for each new CDR file. This
task was previously performed by the DIH BSCS processes.
o Duplicate record check both on CDR level and file level. Replaces
the DRH BSCS batch process
o Consolidation of "long duration calls". Replaces the AIH BSCS batch
process.
Encoding
The BMP encoder produces output CDR files in BSCS UTX format.
Disk Distribution
UTX output files will be saved to a location which will point directly to the
$WORK_DIR/MP/SWITCH directory on the BSCS server. This directory will be NFS
mounted on the BSCS server. In this way it will be easy to keep track of all CDR
files and it simplifies the backup procedure.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -32-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix II
General Terms & Conditions
APPENDIX II
General Terms & Conditions
Responsibility Projects
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -33-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix II
General Terms & Conditions
Content Appendix II
1 Contractual parties.......................................................4
2 Introduction..............................................................5
3 Contract Documents........................................................5
4 Definitions...............................................................6
5 Time Schedule.............................................................7
6 Responsibilities of CGE&Y.................................................8
7 Responsibilities of EuroTel...............................................9
7.1 Organisational and facilities..........................................9
7.2 Business Requirements..................................................9
7.3 Test Data with Description.............................................9
7.4 Acceptance Test Specification.........................................10
7.5 Network and Hardware ready for Installation...........................10
7.6 Hardware..............................................................10
8 Change Requests..........................................................10
8.1 General...............................................................10
8.2 Agreement.............................................................10
9 Compensation and Payment Plan............................................11
9.1 Compensation..........................................................11
9.2 BMP RTC Software License Fee Structure................................14
9.3 Payment Plan..........................................................14
9.4 Time and Material Work................................................15
10 Warranty and Maintenance.................................................15
11 Representatives of the Parties...........................................16
12 Steering committee.......................................................16
13 Governing Law, Disputes..................................................17
14 Approvals................................................................18
Content Appendix I.........................................................20
1 EuroTel Objectives.......................................................22
1.1 High Level Requirements...............................................22
1.2 Scope of specification................................................22
1.3 Local Support.........................................................25
2 Scope....................................................................25
2.1 Software Licenses.....................................................25
2.2 Documentation.........................................................26
2.3 Training Services.....................................................26
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -34-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix II
General Terms & Conditions
2.4 Implementation Services...............................................27
Content Appendix II........................................................36
ss. 1 Performance of the Services.........................................38
ss. 2 Acceptance of Delivery..............................................38
ss. 3 Remuneration........................................................38
ss. 4 Payment.............................................................39
ss. 5 Amendments and Alterations..........................................39
ss. 6 Title etc...........................................................39
ss. 7 Secrecy.............................................................40
ss. 8 Warranty............................................................41
ss. 9 Liability...........................................................42
ss. 10 Infringement of Intellectual Property Rights.......................43
ss. 11 Force majeure......................................................43
ss. 12 Termination........................................................45
ss. 13 Disputes...........................................................45
ss. 14 Applicable law.....................................................45
ss. 15 Severability.......................................................45
ss. 16 Waiver.............................................................46
Content Appendix III.......................................................48
1 Introduction.............................................................51
2 System Overview..........................................................52
2.1 Collection, Processing and Distribution...............................52
2.2 EHPT BMP Definitions..................................................53
2.3 BMP Overview..........................................................54
2.4 BMP IP Overview.......................................................56
2.5 BMP for convergence...................................................57
3 BMP......................................................................59
3.1 Using BMP.............................................................59
3.2 Collection............................................................60
3.3 Processing............................................................62
3.4 BMP, Additional Functionality.........................................77
3.5 Tools - Implementation and Adaptation.................................80
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -35-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix II
General Terms & Conditions
ss. 1 Performance of the Services
1.1 The Services shall be performed according to agreed specification of
requirements. EuroTel guarantees that this specification is correct,
complete and constitutes a correct ground for the Services. When the
commission includes the preparation of a specification of requirements, a
draft of such a specification shall be handed over to EuroTel for his
approval. CGE&Y is entitled to postpone all further measures, until such
an approval has been received.
1.2 EuroTel shall, at his expense, provide hardware and other equipment,
software, other necessary equipment and material as well as premises
required for the Services .
1.3 EuroTel shall provide CGE&Y with the necessary information to perform the
Services.
ss. 2 Acceptance of Delivery
2.1 EuroTel shall approve or refuse the result of the acceptance test in
writing within two weeks of a notice from CGE&Y that the delivery is ready
for acceptance. If no such letter is received, or if an acceptance test
has not been called for, it shall be deemed that EuroTel has accepted the
result of the Services.
2.2 EuroTel shall be considered to have accepted a delivery, if and when
EuroTel takes the delivery or any part thereof into operation or when
CGE&Y has delivered the result of the Services, carried out mainly in
accordance with the Agreement. Such minor defects, as defined in section
2.4.9 of Appendix I, which do not prevent EuroTel from using the delivery
in a meaningful way, shall not prevent acceptance. CGE&Y is entitled to
correct such minor defects after acceptance and correction shall be made
without unreasonable delay.
ss. 3 Remuneration
3.1 When providing extra work compensated on time and material, CGE&Y is
entitled to compensation for expenses etc. as follows
3.1.1 Remuneration for travel time during normal working hours in
accordance with the prices or the hourly rates set out in the
Agreement or else in accordance with the current price list of CGE&Y
at the time of the performance of the services.
3.1.2 For services agreed to be performed during other hours than normal
business hours, if the work has been performed between 06.00-20.00
weekdays, a fifty per cent higher remuneration per hour and to a
hundred per cent higher remuneration for such work performed during
other hours.
3.1.3 For expenses by an amount equivalent to cost plus a reasonable
addition for administration.
3.2 At the end of each calendar year, CGE&Y is entitled to increase daily
rates for time and material services in relation to the change of the
German Consumer price index the preceding year.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -36-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix II
General Terms & Conditions
3.3 Agreed prices or standards to set prices or amounts do not include VAT,
customs, import duties or other taxes or duties or the like imposed by the
Government or any other Authority.
3.4 All payment shall be made in Euro.
3.5 If the parties have agreed so explicitly or if it is required by mandatory
law that payment shall be made in another currency, CGE&Y is entitled to
adjust all prices as follows. Adjustment may be made, if the value of the
agreed currency in relation to the Euro on the due date has changed with
more than two per cent from the date of the agreement. The exchange rates
to be applied are the average rates noted by the Slovak National Bank.
ss. 4 Payment
4.1 CGE&Y shall invoice EuroTel according to the payment plan set out in the
Agreement. Such invoice shall reference the order number. An invoice for
services on time and material shall show the amount of hours and fees for
each person engaged in the commission.
4.2 Services and expenses not covered by a payment plan will be invoiced
monthly in arrears.
4.3 Penal interest will be charged in accordance with an annual rate of seven
and a half percent (7.5%)
ss. 5 Amendments and Alterations
5.1 EuroTel shall compensate CGE&Y in accordance with the rates and conditions
for time and material services, for extra services and costs due to
amendment to or alteration of the agreed Services as well as for waiting
time, services and costs caused by EuroTel.
5.2 If and to the extent that an alteration of or an amendment to the Services
has been agreed and if EuroTel has caused a delay, CGE&Y shall be entitled
to any extension of time required.
ss. 6 Title etc
6.1 The title and copyright to the system, software, documentation, manuals
and the like, which have been developed under this Agreement belongs to
EuroTel, provided payment in full has been made. This does not apply to
software products for which a license, a right to use or the like has been
granted.
Copyright and title to all TCL and Java code developed as a result of
Appendix I, section 2.4, of the Agreement belongs to EuroTel. CGE&Y grants
to EuroTel a non-transferable, unlimited in time and non-exclusive right
to use all products and any related documentation generated and/or
furnished under this Agreement. There shall be no other consideration for
the usage rights paid to CGE&Y by EuroTel than agreed in this Agreement,
as well as in the Sub-License Agreement. On full payment of the license
cost under this Agreement, EuroTel is entitled to use the BMP product
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -37-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix II
General Terms & Conditions
according to the terms and conditions contained in the Sub-License
Agreement.
6.2 Rights to assets supplied by any third party are restricted to limitations
set out by that third party.
6.3 When applicable, CGE&Y reserves the title to any goods delivered, until
payment in full has been made for the total delivery.
ss. 7 Secrecy
7.1 EuroTel hereby authorizes CGE&Y to make public reference to EuroTel's
selection of the CGE&Y service line(s) and the nature of the services
provided. Subject to EuroTel's prior written consent, CGE&Y may publicly
refer to the solution implemented or to be implemented by CGE&Y and may
write and publish a high-level profile discussing the reasons supporting
EuroTel's choice of the CGE&Y solution and the benefits gained by EuroTel.
7.2 EuroTel and CGE&Y agree that any information directly or indirectly
received from the other party in connection with the above project will be
treated strictly confidentially. Such confidential treatment requires that
the information received form the other party (i) will not be disclosed to
any third party and (ii) will not be used for any purpose other than as
necessitated by the objective stated in this Agreement. Any use beyond
this scope, and any disclosure to a third party, requires the prior
written consent of the disclosing party. However, disclosure to affiliated
companies or to advisers shall be permitted without such explicit, written
consent, provided the disclosure is necessitated by the commission and
further provided any such recipient has first agreed in writing to comply
with the confidentiality obligations as stipulated by this Agreement. Each
party will treat information received from the other party with the same
degree of care as applied to its own confidential or proprietary
information, and at least with the care afforded by a diligent business
partner.
7.3 The confidentiality obligation shall not apply with respect to information
that:
a) is known to the recipient without restrictions regarding
confidentiality prior to receipt form the other party, or
b) is publicly available at the time of disclosure, or thereafter
becomes publicly available other than through a breach of this
Agreement, or
c) is lawfully and without confidentiality obligations obtained from a
third party.
Notwithstanding the above, each party shall be entitled to fulfil
information requests to the extent required by law.
7.4 The confidentiality obligations arising out of this Agreement shall remain
effective for a term of five (5) years, notwithstanding any earlier
termination of the Agreement.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -38-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix II
General Terms & Conditions
7.5 EuroTel and CGE&Y agree that no grant of a license or other authorisation
to use shall be connected to the disclosure of information under this
Agreement. Neither party shall be entitled to act as an agent or in any
other capacity for the other party. The establishment of any obligations
between EuroTel and CGE&Y beyond the scope of this Agreement shall require
an explicit, written agreement.
7.6 All CGE&Y personnel that have any access to the subscriber names and or
addresses, electronically or written form, shall sign a separate personal
confidentiality undertaking.
7.7 CGE&Y shall be liable for it's personnel for any and all misuse of the
EuroTel subscribers personal data and billing data. In any case, however,
these data may not be copied, transmitted or transferred in any form from
the EuroTel location to elsewhere.
ss. 8 Warranty
8.1 CGE&Y warrants that all services provided will be performed professionally
and in accordance with good workmanship and by personnel with the
necessary skills. CGE&Y warrants that the system as the result of the
services rendered by CGE&Y under this Agreement has the functionalities
stated in the Agreement and that the performance of the system is such as
can be required considering what has been stated above.
8.2 CGE&Y is, subject to stated limitations, obliged to correct Defects in the
system caused by CGE&Y and signifying that agreed requirements are not
met. Rectification will be carried out through correction or, provided
this does not cause significant inconvenience, by instructions on how to
circumvent the Defect. The Warranty includes the services required to
correct Warranty Defects but not costs for materials and equipment. If
CGE&Y will be compensated for services on a time and material basis, the
warranty for such services covers CGE&Y's costs to correct defects.
8.3 The Warranty period is six months from acceptance. CGE&Y shall be
responsible only for Defects notified to CGE&Y without unreasonable delay
and during the Warranty period.
8.4 Defects covered by the Warranty shall be corrected without unreasonable
delay. Should a Defect prevent EuroTel from using the system,
functionalities, products for agreed purposes, the rectification measures
shall be initiated within 24 hours from the time CGE&Y received
notification of the Defect. Should CGE&Y not correct a Defect with the
speed appropriate under the circumstances, EuroTel is allowed to grant
CGE&Y a final and reasonable extension of time to correct the Defect. If
the Defect still has not been corrected at the expiry of such an extension
period, if granted, EuroTel is entitled to a reduction of the purchase
price for the system, corresponding to a market price for the correction
of the Defect.
8.5 Should EuroTel report a Defect and it turns out that the reported Defect
is not one for which CGE&Y is responsible, then EuroTel shall compensate
CGE&Y on a time and material.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -39-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix II
General Terms & Conditions
8.6 CGE&Y's responsibility does not cover defects which are
- discovered or which ought to have been discovered at the acceptance
test but which have not been notified promptly to CGE&Y,
- caused by EuroTel's use of the system, with equipment or accessories
other than those specified by CGE&Y, in a manner which affects its
function or by EuroTel's carrying out changes of, or measures with
the system, not in accordance with CGE&Y's instructions,
- due to negligence by EuroTel, its staff or third party or by
circumstances beyond the control of CGE&Y,
- due to the fact that EuroTel has given incorrect or incomplete
information or choice of test data or has given incorrect or
incomplete prerequisites for the system.
8.7 Should EuroTel, without the prior consent of CGE&Y, make changes in or
take measures with the system of such significance that the investigation
of who is responsible for Defects is considerably impeded, then CGE&Y's
responsibility according to the Warranty ceases for involved parts of the
system.
8.8 CGE&Y's responsibilities according to the Warranty are limited to what is
mentioned in these General Terms and Conditions. Consequently, CGE&Y is
not obliged to compensate EuroTel for, transport of equipment,
stand-stills or other damages due to Warranty Defects and EuroTel is not
entitled to cancel the Agreement due to Warranty Defects.
ss. 9 Liability
9.1 The liability of both parties is restricted to direct damages. Neither of
the parties shall have any liability for any indirect damages as loss of
revenue, profit or saving, drop in production, loss of data, third party
damages or consequential damages. However, this limitation does not apply
in cases of willful action and gross negligence.
9.2 If there is an agreed delivery time and the Services are delayed,
penalties will be paid. Such penalties shall be set to an amount per
completed week that the delay has been going on, equivalent to 0.5 per
cent of the basis of calculation, but not, however, totalling more than 10
per cent of the basis of calculation. The basis of calculation shall be
the remuneration to CGE&Y for the Services initially agreed. If only part
of the Services are delayed, the basis of calculation shall be the part of
the contract price or the remuneration, which corresponds to the part of
the Services which have been delayed. EuroTel is not entitled to any
remuneration or damages due to late delivery in excess of these penalties.
9.3 The total liability of CGE&Y - when applicable including penalties - is
limited to an amount, equivalent to 50 per cent of the remuneration to
CGE&Y for the Services initially agreed. After delivery in accordance with
ss. 2 CGE&Y is not in any case obliged to repay any remuneration received
except in accordance with ss.8.4 above.
9.4 CGE&Y is responsible for the performance of work carried out by
subcontractors as if the work were his own. If CGE&Y has delivered
hardware or other equipment or system
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -40-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix II
General Terms & Conditions
or standard software, CGE&Y is not liable in any way or to a any greater
extent, than what may actually be recovered from the supplier.
9.5 EuroTel's right to damages, penalties or any other remuneration shall be
forfeited if the claim has not been made in writing without delay and
within three months from the day of the occurrence of the circumstance,
which caused the damages. After the expiry of the warranty period CGE&Y
has no remaining liability, unless CGE&Y has caused damages wilfully or
through gross negligence. Should a specific warranty for a certain period
of time not have been agreed, then all liabilities of CGE&Y shall in all
events cease six months after delivery.
ss. 10 Infringement of Intellectual Property Rights
10.1 CGE&Y guarantees that the use of system, product or documentation
developed or delivered by CGE&Y in accordance with the Agreement, does not
infringe the right of any third party to patent, copyright or trademark.
EuroTel is obliged to give notice immediately to CGE&Y, in case such
infringement has been alleged or is to be expected.
10.2 CGE&Y shall fully indemnify EuroTel and keep EuroTel indemnified from and
against all actions, claims, demands, costs, charges and expenses which
they sustain and which arise from a claim or allegation by a third party
to the effect that the supply or the modification of the use of system,
product or documentation developed and delivered by CGE&Y in accordance
with the Agreement, infringes or caused to be infringed any patent or
registered design or copyright of a third party or amounts to a breach of
obligation of non-disclose owed to a third party (and which in either case
is in existence at the date of Agreement or comes into existence
thereafter and which, in the latter case, is known or ought reasonably to
have been known to CGE&Y).
10.3 In the event of any claim being made or action brought against EuroTel
arising out of the matters referred to in sub-clause 10.2. CGE&Y shall be
notified promptly thereof, and shall at his own expense conduct all
negotiations for the settlement of the same and any litigation that may
result therefrom. EuroTel shall, at the request of CGE&Y, afford all
available assistance for the purpose of contesting any such claim or
action and shall be repaid any expenses incurred in so doing.
ss. 11 Force majeure
11.1 A party is not liable for a failure to perform any of his obligations in
so far as he proves:
a) that the failure was caused by circumstances excluding his
liability; and
b) that he could not reasonably be expected to have taken the
impediment and its effects upon his ability to perform into account
at the time of the conclusion of the Agreements; and
c) that he could not reasonably have avoided or overcome it or at least
its effects
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -41-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix II
General Terms & Conditions
11.2 An impediment within paragraph 11.1 above, may result from events such as
the following, this enumeration not being exhaustive:
a) war, whether declared or not, civil war, riots and revolutions, acts
of piracy, acts of sabotage;
b) natural disasters such as violent storms, cyclones, earthquakes,
tidal waves, floods, destruction by lightning;
c) explosions, fires, destruction of machines, of factories, and of any
kind of installations;
d) boycotts, strikes and lock-outs of all kinds, go-slows, occupation
of factories and premises, and work stoppages which occur in the
enterprise of the party seeking relief;
e) acts of authority, whether lawful or unlawful, apart from acts for
which the party seeking relief has assumed the risk by virtue of
other provisions of the Agreement.
11.3 For the purpose of paragraph 11.1 above, and unless otherwise provided in
the Agreement, impediment does not include lack of authorisations, of
licences, of entry or residence permits, or of approvals necessary for the
performance of the Agreement and to be issued by a public authority of any
kind whatsoever in the country of the party seeking relief.
11.4 The party seeking relief shall as soon as practicable after the impediment
and its effects upon his ability to perform became known to him give
notice to the other party of such impediment and its effects on his
ability to perform. Notice shall also be given when the ground of relief
ceases.
11.5 The ground of relief takes effect from the time of the impediment. Failure
to serve notice makes the failing party liable in damages for loss which
otherwise could have been avoided
11.6 A ground of relief under this clause relieves the failing party from
damages, penalties and other contractual sanctions as long as and to the
extent that the ground subsists.
11.7 Further it postpones the time for performance, for such period as may be
reasonable, thereby excluding the other party's right, if any, to
terminate or rescind the Agreement. In determining what is a reasonable
period, regard shall be had to the failing party's ability to resume
performance, and the other party's interest in receiving performance
despite the delay. Pending resumption of performance by the failing party
the other party may suspend his own performance.
11.8 If the grounds of relief subsist for more than 8 (eight) weeks period,
either party shall be entitled to terminate the Agreement with written
notice.
11.9 Each party may retain as is, i.e. with no warranty pursuant to the
Agreement hereof, what he has received from the performance of the
Agreement carried out prior to the
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -42-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix II
General Terms & Conditions
termination. The payment of the mutually agreed final balance pursuant to
the Agreement hereof shall be made without any delay.
ss. 12 Termination
12.1 EuroTel has the right to terminate the Agreement with immediate effect, if
CGE&Y has broken the Agreement materially and not, despite a special
request, taken rectification measures within reasonable time. However,
EuroTel does not have a right to terminate the Agreement due to delay,
until EuroTel has become entitled to maximum penalties. After termination
according to this subsection of ss. 12 CGE&Y is entitled to remuneration
for work carried out, expenses for travel and allowances and other
expenses, provided that the result of the Services of CGE&Y is used or can
be used in a meaningful way.
12.2 CGE&Y has a right to terminate the Agreement with immediate effect, if
EuroTel has broken the Agreement in a material way and not, despite a
special request, taken rectification measures within reasonable time .
12.3 Either party is entitled to terminate the Agreement with immediate effect,
if the other party has been put into bankruptcy, has entered into
negotiations for a composition with his creditors, stopped his payments or
yet may be considered insolvent.
ss. 13 Disputes
Any dispute concerning the interpretation or application of this Agreement
shall be settled by an ordinary court of law in Bratislava.
ss. 14 Applicable law
Slovak law shall be applicable on this contractual relationship.
ss. 15 Severability
In the event of any part of this Agreement being declared by any court of
competent jurisdiction to be invalid or unenforcable, such part shall be
deemed to be severed from the Agreement and shall in no way impair or
affect the remainder of this Agreement which shall remain in full force
and effect.
ss. 16 Waiver
The failure of either party at any time to enforce any provision of this
Agreement shall in no way affect its right thereafter to require complete
peformance by the other party, nor shall waiver of any breach of any
provision be taken or held to be a waiver of any susequent breach of any
such provision or be a waiver of the provision itself. Any waiver to be
effective must be in writing.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -33-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
APPENDIX III
BMP 4.1 Product Description
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -44-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
Content Appendix III
1 Contractual parties.......................................................4
2 Introduction..............................................................5
3 Contract Documents........................................................5
4 Definitions...............................................................6
5 Time Schedule.............................................................7
6 Responsibilities of CGE&Y.................................................8
7 Responsibilities of EuroTel...............................................9
7.1 Organisational and facilities..........................................9
7.2 Business Requirements..................................................9
7.3 Test Data with Description.............................................9
7.4 Acceptance Test Specification.........................................10
7.5 Network and Hardware ready for Installation...........................10
7.6 Hardware..............................................................10
8 Change Requests..........................................................10
8.1 General...............................................................10
8.2 Agreement.............................................................10
9 Compensation and Payment Plan............................................11
9.1 Compensation..........................................................11
9.2 BMP RTC Software License Fee Structure................................14
9.3 Payment Plan..........................................................14
9.4 Time and Material Work................................................15
10 Warranty and Maintenance.................................................15
11 Representatives of the Parties...........................................16
12 Steering committee.......................................................16
13 Governing Law, Disputes..................................................17
14 Approvals................................................................18
Content Appendix I.........................................................20
1 EuroTel Objectives.......................................................22
1.1 High Level Requirements...............................................22
1.2 Scope of specification................................................22
1.3 Local Support.........................................................25
2 Scope....................................................................25
2.1 Software Licenses.....................................................25
2.2 Documentation.........................................................26
2.3 Training Services.....................................................26
2.4 Implementation Services...............................................27
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -45-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
Content Appendix II........................................................36
ss. 1 Performance of the Services.........................................38
ss. 2 Acceptance of Delivery..............................................38
ss. 3 Remuneration........................................................38
ss. 4 Payment.............................................................39
ss. 5 Amendments and Alterations..........................................39
ss. 6 Title etc...........................................................39
ss. 7 Secrecy.............................................................40
ss. 8 Warranty............................................................41
ss. 9 Liability...........................................................42
ss. 10 Infringement of Intellectual Property Rights.......................43
ss. 11 Force majeure......................................................43
ss. 12 Termination........................................................45
ss. 13 Disputes...........................................................45
ss. 14 Applicable law.....................................................45
ss. 15 Severability.......................................................45
ss. 16 Waiver.............................................................46
Content Appendix III.......................................................48
1 Introduction.............................................................51
2 System Overview..........................................................52
2.1 Collection, Processing and Distribution...............................52
2.2 EHPT BMP Definitions..................................................53
2.3 BMP Overview..........................................................54
2.4 BMP IP Overview.......................................................56
2.5 BMP for convergence...................................................57
3 BMP......................................................................59
3.1 Using BMP.............................................................59
3.2 Collection............................................................60
3.3 Processing............................................................62
3.4 BMP, Additional Functionality.........................................77
3.5 Tools - Implementation and Adaptation.................................80
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -46-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
[LOGO]--------------------------------------------------------------------------
EHPT BMP
Version 4.1
[GRAPHIC OMITTED]
NOTICE
The content of this document is subject to revision without notice due to
continued progress in methodology, design and manufacturing.
EHPT Sweden AB shall have no liability for any errors or damage of any kind
resulting from the use of this document. All registered and unregistered
trademarks mentioned are the sole property of their respective owners.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -47-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
1 Introduction
EHPT BMP, developed by EHPT, is an open, multi-service, multi-platform mediation
system that provides you with a flexible, accurate, scalable, and user-friendly
solution for collecting, processing, and distributing service usage data in all
networks.
This open and highly flexible system collects service usage data from many
different networks and different network elements. In an IP network it collects
the data from for example routers, gateways/gatekeepers, web servers and mail
servers. The collected usage data - for Internet, wireline, wireless (including
GPRS) and other network services - is combined into, and flexibly managed by, a
single common billing mediation solution. This solution can be based on one BMP
system or several distributed BMP systems. Besides distributing the usage data
traditionally to billing systems, the BMP solution also processes and
distributes the usage data to other downstream client applications, such as
Fraud and Call Analysis.
[GRAPHIC OMITTED]
EHPT BMP:
Make you prepared for unknown business demands
BMP is designed to support your growing business. Maximum flexibility and
scalability enable you to concentrate on expanding your business.
Shortens your Time To Market
The powerful adaptation tools in BMP make it easy to introduce new services and
network elements. And since EHTP BMP isolates your network from your business
applications, you can make changes without disrupting normal operations.
Enables service convergence
BMP collects data from all networks - fixed, mobile, GPRS, Internet and others.
BMP facilitates the transition to the world of IP.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -48-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
Is easy to use
BMP's graphical user interface has been designed in collaboration with service
providers and is extremely easy to use. BMP has help and user documentation
online.
Is proven
BMP has been operational for several years, providing reliable mediation for
more than 80 service providers around the world.
2 System Overview
2.1 Collection, Processing and Distribution
The BMP mediation system has three major features for handling service usage
data collection, processing, and distribution.
[GRAPHIC OMITTED]
2.1.1 Collection
BMP collects usage data - automatically and on-line - from multi-service
networks.
2.1.2 Processing
BMP has powerful processing features to prepare the usage data for the
downstream systems by, for example, making sure that the usage data is correct,
adapting the usage data to specific needs and enriching the usage data e.g. with
pre-rating information.
2.1.3 Distribution
BMP can transfer multiple streams of usage data records to different downstream
application systems.
2.1.4 Two BMP Modules
Pricing models will change when service providers enter the new convergent
world.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -49-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
Mediation devices must be able to handle both CDRs and IPDRs. Service providers
in the Internet arena will have different requirements compared to traditional
telecom service providers. The Internet is far more complex, with unlimited
types of applications and services. In the IP world there is no equivalent to
the circuit-switched CDRs, which are necessary to xxxx for IP services
successfully. The Internet operates in real-time and customer usage must be
collected in the same manner.
BMP therefore has two modules, BMP and BMP IP. BMP is used in a traditional
circuit-switched (Fixed, Mobile including GPRS) environment. BMP IP is used in
an IP (packet-switched) environment. In a convergent solution both modules are
used.
[GRAPHIC OMITTED]
2.2 EHPT BMP Definitions
A brief description is given in this section to help the reader understand the
BMP specific (and some other) terms used in this document.
2.2.1 Job
It is necessary to construct a job to manage the flow of data according to a
customer's business rules. A job consists of the collection, processing, and
distribution of usage data.
2.2.2 Group
A BMP job is divided into three functional groups: collection, processing, and
distribution. The job procedures are separated into these groups.
2.2.3 Collection group
A collection group can consist of one or several collection nodes.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -50-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
2.2.4 Processing group
A processing group can consist of one or several processing nodes. It is not
mandatory to have a processing group in a job.
2.2.5 Distribution group
A job can have several distribution groups, each containing one distribution
node.
2.2.6 Nodes
The nodes represent sub-processes and are shown as icons in the User Interface.
The user can choose between different collection, processing, and distribution
nodes to constitute the job.
CDR
Call Detail Record. An accounting record produced by circuit switches (including
GPRS) to track Call Type, Time, Duration, Facilities used, Originator,
Destination, etc. CDRs are used for customer billing, rate determination,
network monitoring and facility capacity planning.
IPDR
Usage Detail Record. An IPDR is the "IP" equivalent of a CDR. The BMP IP module
produces IPDRs.
2.3 BMP Overview
In voice networks Call Detail Records (CDRs) are produced by the Network
Elements. CDRs are collected by the multivendor set of collectors for voice
switches that are available in BMP. CDR files are broken down into individual
CDRs, which can be uniquely processed with the comprehensive set of processing
functionality available. Once the CDRs have been processed and are ready for
distribution, they can be distributed to any desired Post Processing System, for
example a Billing System.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -51-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
[GRAPHIC OMITTED]
2.3.1 Collection
BMP collects usage data - automatically and on-line - from multivendor networks
as well as from other BMP systems. BMP has "off-the-shelf" collectors for
switches from all major vendors.
2.3.2 Processing
BMP has powerful processing features for copying, formatting, merging,
filtering, validating, streaming, modifying, and consolidating usage data. With
the integrated Business Rules Builder, customer-specific processing flows can be
created or changed through a Graphical User Interface (GUI) by combining icons
representing different processing options.
Processing includes an enhanced processing feature, which is an extremely
flexible building block that makes it possible to apply virtually any
user-defined processing in BMP.
2.3.3 Distribution
BMP can transfer multiple streams of individual data records or data files to
different downstream application systems by using a number of different
protocols.
2.3.4 BMP, Base System
The BMP Base System contains the base capabilities of BMP, for example logging,
GUI and scheduling. The scheduler serves as a central control point that, among
other things, starts and maintains jobs and handles the user's requests.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -52-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
2.3.5 Additional BMP functionality
With the high availability configuration, two BMP systems, each running separate
jobs during normal operation, back each other up in case of a single point of
hardware failure. With the CDR Repair system, CDR files can be viewed and
edited.
2.3.6 Remote Management & Additional Management Applications
BMP web manager application for remote management. BMP provides interfaces for
remote management of one or several BMP systems from a central location.
Management systems based on SNMP and BNSI can also be utilized.
2.4 BMP IP Overview
The old rules of the circuit-switched network do not apply in the IP world. The
Internet is far more complex, with unlimited types of applications and services.
In the IP world there is no equivalent to the circuit-switched CDRs, which are
necessary to xxxx for IP services successfully. The Internet operates in
real-time and BMP IP collects data in the same manner.
BMP IP enables you to charge for usage by collecting IP network transactions in
real-time, filter away unnecessary information, aggregate information from
different sources and create IPDRs (equivalent to the circuit-switched CDRs). An
IPDR is handled in the same way as a CDR when distributed to BMP and all
functionality that can be used for a CDR can also be applied for an IPDR.
[GRAPHIC OMITTED]
For more details on BMP IP please see the BMP IP product description.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -53-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
2.4.1 Collection
BMP IP collects IP transaction data (events) from IP networks - in real-time.
2.4.2 Processing
The BMP IP processing features consist of filtering, aggregation and creation of
IPDRs.
IPDRs can be created either based on time, where the time interval for creating
the IPDR is configurable from sub-seconds to x hours. IPDRs can also be closed
based on the whole log-in period, for e.g. a dial-up connection.
IPDRs can be created according to the IPDR standard, see xxx.xxxx.xxx, or any
other customised format.
2.4.3 Distribution
BMP IP can distribute the created IPDRs real time to a dedicated IP billing
system, or to BMP where the IPDRs can be processed utilizing the comprehensive
set of functions available.
2.4.4 BMP IP Base System
The BMP IP Base System contains the base capabilities of BMP, for example
logging, a GUI and security mechanism.
2.4.5 Remote Management & Additional Management Applications
The BMP web manager application can be used for management, i.e. alarms and
status of the BMP IP jobs running. The BMP web manager provides interfaces for
remote management of one or several BMP systems from a central location.
2.5 BMP for convergence
The figure below illustrates an example of a GPRS mediation case when both BMP
and BMP IP are prerequisites for a convergent billing solution. In the example,
a service provider is charging for delivered quality when providing a specific
type of WAP service, for example stock exchange information. The GPRS node
provides information about delivered quality which is then captured by BMP. BMP
IP provides information about who accessed what and for how long. This
information must be consolidated before it can be sent to the billing system.
BMP and BMP IP are the enablers for convergent billing.
In a convergent environment, where different types of networks, both packet and
circuit switched, need to be interfaced for usage data the solution is to use
both BMP and BMP IP. BMP IP is designed to work together with BMP as a
pre-collector. This pre-collector can be seen as an advanced collector which
internally also contains processing. BMP IP deals with the real-time
requirements for capturing the transaction data in an IP network and the
creation of IPDRs. These IPDRs can be further processed by BMP and can be
consolidated with the CDRs from a voice network as well.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -54-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
[GRAPHIC OMITTED]
Below shows a mediation case for GPRS when both BMP and BMP IP are a
pre-requisite for a flexible convergent billing solution. The example below
shows a service provider charging for Quality delivered when providing a
specific type of WAP service. For example stock information. The GPRS node
provides information about Quality delivered. This is captured by BMP. BMP IP
provides information about who has accessed what, during which time period. This
information has to be consolidated before it can be sent to the billing system.
BMP and BMP IP are the enablers for convergent billing as described.
[GRAPHIC OMITTED]
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -55-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
3 BMP
3.1 Using BMP
Graphical User Interface (GUI)
The user can access all functions associated with the features that the BMP
system provides using X-Motif style windows in the GUI.
The BMP main window, which is displayed once the system has been started, has
menus that allow the user to access the following main operational areas of the
BMP system:
o System
o Maintenance
o Job
o Inspect
[GRAPHIC OMITTED]
3.1.1 System
The system menu allows the user to set generic parameters for network elements
and the BMP applications. The user can also open new functional features added
to the BMP system, or view a list of the functional features that the BMP system
is licensed for.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -56-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
3.1.2 Maintenance
The maintenance menus allow the user to perform maintenance of parameters for
the collection, processing, and distribution features of the BMP system, such
as:
o Network elements, external BMP systems, and Post-Processing Systems
(downstream systems)
o Criteria for format translation, CDR sequence number validation,
selection, validation, etc
o Privileges for BMP system users
3.1.3 Job
The job menu allows the user to construct a BMP job by selecting icons from a
palette, placing them in a job control window, and connecting them to perform
the required functions for the collection, processing, and distribution of CDRs.
Multiple job handling allows several jobs to be controlled at the same time. In
the job monitor window, the user can monitor information about the jobs he or
she is interested in.
3.1.4 Inspect
The Inspect menu allows the user to view or configure the BMP logs.
3.1.5 Help
The help menu displays a window that provides information to guide the user in
the operation of the BMP GUI.
3.2 Collection
BMP uses collectors to collect usage data that is to be processed and
distributed to a specific directory, to a downstream client application or to
another BMP system. Data can be collected from different network elements from
different vendors. For circuit-switched networks BMP provides:
o FTP Collection
o - Collects from NE's running standard FTP
- Collects from Rescission Adjunct Processor using FTP
- Collects from Nokias WAP Gateway using NAMP protocol
o FTAM Collection
o Collects from all major switches using FTAM, such as Lucent 5ESS,
Ericsson AXE, Siemens EWSD, Alcatel S12 or E10, Nokia DX200 and
others
o Proprietary Collection:
- MTP from Ericsson AXE switches
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -57-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
- XFER and AFT from Nortel DMS switches
- AMATPS for Lucent 5ESS
- NEC NEAX
o Hot Billing:
- DFO from Ericsson AXE switches
- DMH (IS-124) from switches utilizing DMH
o Disk Collection
o InterBMP Collection (collection from other BMP systems)
Hot billing collection means CDR by CDR collection instead of CDR file
collection. BMP supports hot billing collection from AXE using DFO and hot
billing collection from network element utilizing the DMH standard.
The collection function supports duplicated file detection and ensures that
files are not collected more than once.
A WAP Gateway is an enabler of advanced services: it is the access point between
the wireless world and the internet/intranet world. BMP collects mediation data
from Nokias WAP Gateway via FTP.
[GRAPHIC OMITTED]
EHPT and its channel partners are constantly adding new collectors to BMP using
the BMP Development Environment. If a desired collector does not exist in BMP, a
new collector specific to a certain network element can easily be developed.
3.2.1 Post Collection Notification
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -58-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
BMP offers the possibility to start a script or a binary when a file has been
collected. The script will be executed before the CDR file is transferred to the
processing (or distribution) node.
3.3 Processing
BMP provides a set of standard processing tools as part of its core functions.
BMP supports the following processing functions:
o Format translation
o Selection
o Validation
o Unique ID generation
o CDR Sequence order validation
o Duplicate CDR detection
o Time gap detection
o Merge
o CDR file header/trailer generation and validation
o Bursting
For further enhanced processing, the Enhanced Processing Nodes provide features
for:
o Assignment
o Database look-up
o Consolidation
o Consolidated usage reports
These features will be further explained in the sections below.
[GRAPHIC OMITTED]
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -59-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
3.3.1 Format Translation (Decode/Encode)
The proven format translator is a key architectural component of BMP. The format
translator translates usage data input formats into a format required by the
receiving downstream system. It does this by converting usage data received from
the external network elements to an internal ASN.1 format (decode process) and
then to a user-defined external format (encode process) that matches the
downstream system.
This function can be used to translate all external service-related data from
multi-vendor switches into a common billing format.
BMP provides capabilities to change the order of the CDR fields, to remove
fields and change the data representation. It is also possible to add new
fields.
BMP's processing features require an internal CDR format to be defined using the
ASN.1 format definitions. BMP can translate virtually any type of incoming
format to ASN.1, and convert the internal ASN.1 format to any outgoing format.
3.3.2 Decoding
Files that BMP has collected from network elements or other external systems and
which require processing are converted to BMP's internal ASN.1 format.
If the BMP installation has the Enhanced Format Builder, see chapter 3.6.4. The
user can create customized mapping definitions. These mapping definitions can
then be used to do conversions from various source formats to BMP's internal
format.
3.3.3 Encoding
Files that BMP has processed are converted from the BMP ASN.1 format to an
external format before distribution.
If the BMP installation has the Enhanced Format Builder, see chapter 3.6.4 the
user can create customized mapping definitions. These can then be used for
making conversions from the BMP internal format to various destination formats.
It is possible to define different output formats so that information can be
transferred to multiple destinations. New format definitions may be performed in
runtime without affecting your current revenue flow.
All BMP format conversions conform to the ASN.1 format definitions.
3.3.4 Selection
BMP retrieves CDRs collected from a remote system. The selection feature streams
or filters CDRs to other processing features, or to a file for further
distribution to an external system. The selection feature uses Boolean
operators, comparison operators (equal, not equal, less than, less than or equal
to, greater than, greater than or equal to) and regular expressions to filter
whether field values are included or not included in a defined set of values.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -60-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
The selection nodes have two outputs: true or false. Each of the two outputs may
distribute CDRs to many other nodes.
The user can edit existing selection criteria or create new criteria in the
Graphical User Interface (GUI).
3.3.5 Validation
The validation feature checks if particular fields of a CDR are within a defined
logic or range of values in order to filter out those CDRs that do not meet the
validation criteria. A separate error file logs the CDRs that do not meet the
validation criteria. The CDRs can also be forwarded if so desired.
The validation function performs two levels of validation on usage data: format
validation (syntactic level), and business rule validation (logical level).
Business rule validation occurs at configured processing points, and can be used
to decide, for example, if a count or duration value is within "reasonable"
bounds.
Validation rules are composed of many expressions where Boolean operators can be
used to decide whether an expression is true or false. BMP can also store these
expressions in a file, which can be read and interpreted to allow for more
flexibility.
The user can edit existing validation criteria or create new criteria in the
Graphical User Interface (GUI). The parameters that can be checked for
individual fields within a record are:
o Value out of range
o Unknown value
o Field length invalid
o Value not included in a predefined set
The user can carry out further handling on the error records that BMP has saved
in a user-defined directory.
BMP allows for the same CDR information to be 'burst' to multiple locations.
This can be useful when more than one downstream PPS is interested in the same
information or a subset of it.
3.3.6 CDR Sequence Order Validation
The CDR sequence order validation feature ensures the sequential processing of
CDRs and that no CDRs in the CDR stream are missing or duplicated. The user can
specify the number of error records ("out of sequence" records) which are
accepted before processing is aborted.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -61-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
BMP removes the error records from the stream and saves them in a
user-configurable directory.
CDR sequence order validation can be applied to CDRs containing a sequence
number field.\
3.3.7 Unique ID Generation
The unique ID generation feature inserts a unique ID in the CDRs for all switch
and service types collected by BMP. A data warehouse, for instance, could
require a unique ID.
3.3.8 Duplicate CDR Detection
The duplicate CDR detection feature ensures that no CDRs are duplicated in the
CDR stream. Duplicate checking can be done both within the same file and between
multiple files. The criteria for considering a CDR to be a duplicate are defined
by the user in the BMP GUI. Duplicate CDRs are stored in an error directory.
3.3.9 Time Gap Detection
The time gap detection feature ensures that there is an acceptable time gap
between two CDRs by comparing the time stamps in the CDRs. The function checks
the minimum and maximum acceptable time gaps between consequential CDRs. The
checking is also done between CDR files, i.e. between the last CDR of one file
and the first CDR of the next. Time Gap Detection can be used to validate that
CDRs are not missing.
3.3.10 CDR File Header/Trailer Generation & Validation
The header/trailer validation feature checks if particular fields of a CDR file
header/trailer are within a defined logic or range of values. Header/trailer
generation makes it possible to generate a new CDR file header and trailer or
modify the contents of an existing one. This is done by assigning values to new
fields in the header/trailer, modifying existing fields or concatenating
existing fields. The enhanced processing node can be used to extract information
from every CDR in a file, which can be used later on in header/trailer
generation.
3.3.11 Merge
Merge is a processing function in BMP that combines several input usage files
into a single, larger output file.
3.3.12 Enhanced Processing - Enhanced Processing Node
Enhanced processing is an extremely flexible building block, which makes it
possible to implement virtually any processing needed.
Enhanced processing in BMP consists of two different nodes, one based on the
JAVA programming language and one on the industry standard TCL script language.
It is possible
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -62-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
to apply the same functionality (logic) in both kinds of node.
The Java node has been extended with a number of pre-defined classes and the TCL
node with a number of pre-defined primitives that give BMP the capability for
example to modify field values, access databases (for instance a subscriber
database) or do more complex format conversions. Enhanced processing also
provides capabilities for doing consolidation of partial CDRs and creating
consolidated usage reports by extracting relevant information from the CDRs.
Enhanced processing could be offered as a runtime license, i.e. EHPT or an EHPT
channel partner will do the set-up, or as a development license allowing the
service provider to define their own processing criteria.
3.3.13 Assignment
Assignment makes it possible to modify the contents of a CDR by adding fields,
assigning values to new fields, modifying already existing fields or
concatenating existing fields.
BMP supplies standard library functions (classes in Java and primitives in TCL)
for the most common and straightforward assignment of new values. Arithmetic
operations are also supported.
3.3.14 Database Look-up
The database look-up feature makes it possible to search internal or external
databases. The information gathered could be used for validation purposes or to
assign new information to existing fields in a CDR. TCL script primitives or
JAVA classes are available for the more common types of database searches.
BMP can retrieve values from the database and use return values to assign these
to new fields in the CDR.
[GRAPHIC OMITTED]
3.3.15 Consolidation
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -63-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
The consolidation function consolidates partial CDRs. It merges the CDRs that
belong to the same chargeable call into one CDR, typically long duration calls
or calls that go on during the "midnight shift", and sends it to the downstream
system. Consolidation is also a key functionality for handling both IP IPDRs and
GPRS CDRs in a GSM network, since information from many sources needs to be
consolidated into one chargeable record.
A selection node identifies the partial CDRs and sends them to the consolidation
node. The consolidation node keeps them waiting until it finds the matching
CDRs, and merges them into one.
The user can define criteria to identify the CDRs that belong to the same
chargeable call. The user can also define the criteria for how the different
fields should be merged before dispatching the consolidated CDR from the
consolidation function, for example to a billing system. It is also possible to
consolidate CDRs from different network elements.
3.3.16 Consolidated Usage Reports
By extracting information from CDRs passing a report (enhanced processing) node,
data can be extracted and stored in pre-defined tables in the BMP database. The
stored data can then be extracted and presented in customer-unique reports by
using for instance Oracle reports or an ODBC connection to Microsoft Excel or
Microsoft Access.
Examples of reports that could be created using the data in the pre-defined
table structure are:
o Total number of call minutes (or calls) per day per switch
o Total number of call minutes (or calls) per day per incoming and/or
outgoing trunk/route
o Total number of call-minutes (or calls) per hour per switch etc
o Data volumes per hour per router (when receiving IPDRs from BMP IP)
3.3.17 Error handling in the processing nodes
Behavior when decoding or processing errors occurs is configurable. The
error-handling feature provides three options:
o -Abort on Max Fail. The processing node will abort when a user
defined maximum number of erroneous CDRs has been reached. BMP
writes all erroneous CDRs to an error directory until the maximum
number is reached.
o Abort on First File. BMP writes the incorrect file to an error
directory and the processing is stopped.
o Continue with next file. BMP writes the file with the erroneous CDRs
to an error directory and automatically continues with the next
file.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -64-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
The decoding node can be set up to decode as much as possible of any faulty CDR
file, hence all CDRs in a file that can be decoded will be decoded and passed to
the next processing node. The remaining CDRs will be stored in a file in an
error directory.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -65-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
3.3.18 Distribution
The distribution function provides a flexible transfer of usage data files or
individual records to downstream applications, such as fraud and call behavior
analysis systems, billing and rating systems, other BMP systems, or to disks.
BMP supports:
o File transfer over FTP
o File transfer over FTAM
o Transfer of files or individual records over TCP/IP
o File transfer to disk, (local or NFS mounted)
o Transfer of files to another BMP system, using an InterBMP file and
message transfer function
[GRAPHIC OMITTED]
3.3.19 Distribution File Name Templates
The distribution file name templates feature allows the user to set the names of
the files to be distributed. The feature provides many name components to choose
from, such as qualifier, source, source file, job, separator between the name
parts, and type of data.
3.3.20 Post Processing Notification
When BMP has processed the CDRs and they have been distributed, it is sometimes
necessary to alert a post-processing system, such as a billing system. BMP
offers the possibility to start a script when a file has been closed and
distributed. The user defines the script and can for example choose to send a
mail to inform the post-processing system that the file is ready.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -66-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
3.3.21 Base System
BMP base system includes the basic capabilities of BMP. These are described
below under the following headings:
o Scheduling
o Business Rules Builder
o Management
o On-line documentation
o User access and security
o Scalability
o Additional management application & Remote management
3.3.22 Scheduling
BMP provides an extensive scheduler, which allows the user to configure and
specify when BMP will perform collection, processing and distribution. The
scheduler, which is an internal subsystem of BMP, serves as a central control
point that is responsible for starting and maintaining jobs, handling requests
from the GUI and so on.
There are three types of scheduling that can be applied to the groups within a
BMP job: periodic, file close and external request. Periodic scheduling and
external request can be used for all collection, processing and distribution
groups, while file close scheduling can be used for processing and distribution
groups only.
3.3.23 Periodic Scheduling
There are three different types of periodic scheduling trigger: weekly, daily or
at an absolute time. BMP can combine multiple schedule configurations to define
a running schedule that specifies when a group within a job will be triggered.
When the time configured for the group is reached, the BMP system will start the
group.
Weekly and daily scheduling can have periodic repeat schedules according to the
setting of a repeat interval parameter. Both schedules can have two parameters,
an activation time and a repeat interval. The activation time specifies when the
schedule will become active. For a weekly schedule, this is a day of the week
plus a time of the day. For a daily schedule, it is simply a time during the
day. The repeat interval specifies the interval between each schedule trigger.
Absolute schedules have an absolute activation time, but no repeat interval
associated with them.
3.3.24 File Close Scheduling
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -67-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
There are two types of file close scheduling; one is based on the number of
files queued up from the previous group in the job chain, the other on the
number of bytes queued up from the previous group in the job chain.
Processing and distribution groups that are configured for file close scheduling
will be triggered immediately when the specified number of files or bytes is
available.
3.3.25 External Request
Scheduling using an external request can be applied to all groups in a job, but
the procedure for using this type of scheduling is dependent on the operation of
an operator-created application.
3.3.26 Business Rules Builder
With BMP's integrated Business Rules Builder, the processing flows are created
according to the customer's specific business rules. The business rules are
created or changed easily through BMP's comprehensive GUI, by combining icons
representing the different processing, collection and distributing nodes.
3.3.27 Management
BMP provides extensive functions for operating, administrating and maintaining
the BMP system, including:
o Monitoring
o Logging
o Data management
o Exception handling, recovery and back-up
3.3.28 Monitoring
The user can access a BMP monitoring window that displays information about
active jobs. The user can specify the type of data to be displayed for the jobs.
Information can be shown about the following:
o Job name
o Group type
o Job and group identifiers
o The data file currently being processed by the group
o The source name for the collection group
o The destination name for the distribution group
o The date and time of the monitored activity
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -68-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
The monitor data is continuously updated while a job is running, and shows the
transient information as the jobs are being executed.
3.3.29 Report Mechanism, Logging
The BMP system provides four logs, which hold data about jobs, user actions,
events and errors. These are:
o Audit log
o Event log
o User log
o Error log
A BMP cleanup function periodically clears data from the user and event logs.
The data in the audit and error logs are not affected by the cleanup. Only the
BMP system administrator can remove the data.
[GRAPHIC OMITTED]
3.3.30 Audit Log
The audit log window displays audit information about jobs. The information
displayed is dependent on the log level set for the job, which is
user-configurable. For a specific job, the audit log can provide information
about:
o The job name
o The file name
o The number of CDRs processed by the processing nodes
o The size of a file in bytes
o The source of the collected file(s)
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -69-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
o The name of the collection group
o The icon number of the processing feature
o The date and time of the audited activity
The number of CDRs processed by the processing node are displayed as:
o Incoming number of CDRs
o Outgoing number of CDRs
o Merged number of CDRs
o Saved number of CDRs
o Deleted number of CDRs
o Modified CDRs
BMP uses the audit log to maintain historical information about the processing
of received CDR files.
3.3.31 Event Log
The event log displays information about events and for jobs. The event log
displays:
o The type of event that BMP logged, for example job started, job
stopped
o The job status, for example success or fail
o The name of the job as defined in a job definition window
o The BMP user associated with the event
o The date and time of the logged event
o Additional information concerning the event
BMP periodically clears the event log data after a configurable interval to
prevent the database from becoming full.
3.3.32 User Log
The user log displays information about actions and the user entities related to
these actions for a selected BMP user. The user log displays:
o The BMP user associated with the entry
o The selected maintenance area function manipulated
o Selected actions, for example delete, insert, log in, and logout
o The date and time for the log entry
o Information from the system about the logged entries
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -70-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
The user log shows the results of a user's interaction with the system. The type
and amount of information that BMP display is configurable. BMP periodically
clears the event log data after a configurable interval to prevent the database
from becoming full.
3.3.33 Error Log
The error log displays information about warning situations, error situations
and critical situations that have occurred in the system.
3.3.34 Data Management
The user can configure how often BMP should automatically remove files that have
been processed and distributed. BMP also surveys the database and alerts the
user when it is running out of disk space.
3.3.35 Exception Handling, Recovery and Back up
BMP stores all information about a job in its database. At a restart, BMP starts
from the last unprocessed file. For example, if a job consists of ten files and
an error occurs at file three, BMP starts with file four at start-up. BMP also
features on-line back up using internal BMP features.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -71-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
3.3.36 On-line Documentation
User documentation is provided on-line in HTML format. The BMP User Guide,
Procedure manual and System Administrators guide can be viewed on-line, with
hyperlinks to all chapters and sub-chapters, in a Netscape or Microsoft Explorer
browser.
[GRAPHIC OMITTED]
3.3.37 User Access and Security
There are two levels of user connection and authentication on BMP systems:
o The end user has to log in to the Unix system and provide a
password. The work environment can be loaded without any possibility
of running direct command lines
o The end user has to provide a second password when connecting to
BMP\
BMP verifies the functions that are available to the user in the log on
procedure. After log-on, BMP connects with the system, and performs an authority
check. Each user has a profile (called user) which the BMP database
administrator sets up in the BMP system. This profile defines the user's
privileges for each BMP function.
BMP allows for two classes of users - the system administrator and the user.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -72-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
3.3.38 System Administrator
The system administrator manages the overall BMP network, systems and
applications. The system administrator grants user privileges according to user
level activity. The system administrator is the only one with authority to
maintain BMP user accounts and privileges and maintain BMP licenses.
The system administrator only allows the following actions:
o Maintain users, and their access rights
o Maintain the BMP authorization key. With this key, the user unlocks
the different features in BMP
3.3.39 User
The user performs BMP node-specific operations. BMP traces user actions into a
user log. From this log, the user can at any time identify the user responsible
for each action. The user can change his or her password, if the old password
can be given.
Multiple levels of clearances provide high security. For example, it is possible
to enable/disable the following actions for each user:
o View
o Update/insert
o Delete
3.3.40 Scalability
BMP is scalable both in capacity and functionality.
Additional functionality can easily be introduced with no, or only minor,
changes to an existing BMP solution.
A single server BMP system is capable of handling a substantial volume of CDR
data and if this should not be enough, BMP can be installed in a distributed
solution containing two or more BMP systems. The system is still, however,
manageable from a central location using industry standard management tools and
specific BMP applications (see Remote Management/Additional Management
Applications).
EHPT recommends separate dimensioning for each implementation case. Factors to
consider when dimensioning a solution include: peak throughput, number of days
of on-line data storage needed, locations of servers at IT center or network
elements building, and the possible need for a high level of availability.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -73-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
3.4 BMP, Additional Functionality
3.4.1 Web Manager
The Web Manager allows the user to monitor and supervise several EHPT BMP,
Initiator and BMP/Initiator IP Systems at a time from a Web browser (Netscape
Navigator or Communicator).
From each managed system the user can view:
o the status of the system
o system statistics
o data throughput
o the status of individual jobs
o the error log.
The Web Manager presents information on two different levels: 1) a systems
overview, with information for all supervised systems and 2) a system view, with
information for one selected supervised system.
In the system overview (1) the following information is displayed:
o A table with the system state, number of jobs, number of running
jobs, and data throughput.
o A common alarm list for all systems, showing the most recent alarms.
The alarm list can be filtered by severity.
From the system view as 2) the following information is displayed:
o All jobs on this system with current state and descriptions. The
jobs can be started and stopped.
o The alarm list for this specific system. The alarm list can be
filtered by severity.
The Web Manager consists of three parts: proxy, server and client. The proxy
runs on the same server as the supervised system and handles all connections
with the supervised system. The Server handles the connections between proxy and
client. The user interface runs on the client.
3.4.2 BNSI Agent
Remote alarm surveillance from EHPT SYNERGIZER can be done using the BNSI
functionality within BMP. Alarms received from an external NE will normally be
followed by an alarm clear message. The alarm can therefore be activated or
cleared in the NE. Alarms that have no clear messages are classified as
"events". If an alarm is classified as an event no message will automatically be
sent to notify that the fault has been corrected. The BNSI Agent has the
following functionality:
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -74-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
o Alarm Message Forwarding
(BNSI Agent reads the BMP log file and translates errors into the
BMSI alarm structure).
o Alarm Filtering
(based on severity and whether the alarm should be sent or not).
o Heartbeat transmission
(The BNSI Agent can send a heartbeat if no alarms have been
forwarded within a set time limit).
3.4.3 SNMP Agent
An SNMP Agent forwards BMP errors as traps to a SNMP Manager enabling BMP to be
supervised centrally. The operator will be alerted when an abnormal event occurs
and can access information in order to take a decision on what action to take.
The functionality included in the SNMP agent is:
o Alarm Message Forwarding
(The SNMP Agent reads the BMP log file and translates alarms into
the SNMP alarm structure)
o Alarm Filtering
(At three levels: Error, Disaster, Warning)
o Configurable Polling Time
( The frequency (in seconds) at which the Agent polls the BMP log
file)
o Configurable Destination IP Address
(The destination IP of the Receiving SNMP Manager can be configured
and is read by the agent at start up)
o Configurable SNMP Trap Type
(i.e. SNMPV1 or SNMPV2 which is read at start up)
o 'The SNMP Agent does not include a MIB.
3.4.4 Job Distribution
With the script-based job distribution functionality, BMP jobs can be extracted
from one BMP system, including all set-up information for that particular job,
and transferred to another BMP system, for instance BMP jobs from a test
environment into a production environment.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -75-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
3.4.5 CDR Repair System
The BMP CDR Repair System (CDR RS) is a tool for examining, editing and
correcting erroneous CDR files to be able to reprocess them. It has an easy to
use GUI, which gives access to the following functionality:
o Encode and decode CDR files
The CDR RS encodes and decodes all ASN.1 formats that BMP supports. When opening
a file the user chooses the file format and the external format. The CDR RS then
displays the internal formats that can be mapped to the selected external
format. All formats are fetched from the BMP dB and new formats must therefore
be added with BMP Format Builder before the CDR RS can use them.
When encoding a file from the internal ASN.1 format the previous external file
format will be utilised. However, the file can also be given a new name and/or
format, leaving the original file untouched.
o Editing Data
Decoded data is displayed in a spreadsheet. Each column represents a CDR field
and each row a CDR number. New data can be typed directly into a CDR field or a
find/replace function can be utilised to enter correct data into the field. If
incorrect data has been entered or a field or a field is missing data, the field
will be marked and the user must re-enter correct data.
o Filtering data
The CDRs displayed in the spreadsheet can be filtered. A filer only applies to a
single column. Multiple filters can be added to each column.
The system can be used as a tool for basic creation of CDR data for test
purposes.
3.4.6 High Availability
To attain a high level of availability, the BMP system can provide duplicated
data links toward the network elements. To prevent any loss of data, BMP uses
mirrored disks for secure storage of all data.
To further increase availability, BMP can be configured as a high availability
system where dual computer systems back each other up. During normal run-time,
the two BMP systems work completely independently of each other and run separate
jobs, but if a single hardware failure occurs the BMP package on that particular
hardware will migrate over to the other machine. The high availability function
therefore ensures the flow of BMP operations. The hardware investment is also
fully utilized, since both servers are running during normal operation. The
configuration shown below is not the complete hardware specification, but merely
an outline of the main parts.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -76-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
[GRAPHIC OMITTED]
3.5 Tools - Implementation and Adaptation
BMP provides very competitive tools for implementation and adaptation. These
tools, and a broad range of services ensure you can quickly deploy (and change)
a system adapted to your specific needs. The following tools and features exist:
Business Rules Builder, Format Builder, Enhanced Processing Node, Script
Invocations and a complete BMP Development Environment (BMP DevKit).
3.5.1 Business Rules Builder
With Business Rules Builder, processing flows can be created according to your
specific business rules. The business rules are created and changed easily
through BMP's comprehensive GUI - by combining icons representing the different
processing, collection and distributing nodes.
3.5.2 Script Invocations
There are a number of possibilities for adapting collection and distribution to
the environment that BMP is working in by invoking customer-unique scripts:
o Post Collection Notification, which offers the possibility to run a
script after a file has been collected
o PPS Notification script, which offers the possibility to run a
script when a file has been distributed
o Selection and Validation expressions can be built using the BMP GUI,
but can also be built as separate scripts.
--------------------------------------------------------------------------------
(C) Cap Gemini Ernst & Young Slovensko, s.r.o. Page -77-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix III
BMP 4.1 Product Description
3.5.3 Enhanced Processing Node, Development License
Enhanced processing is an extremely useful tool, which enables you to virtually
implement any processing needed. Enhanced processing in BMP consists of two
different nodes; one based on the JAVA programming language and the other on the
industry standard TCL script language. It is possible to apply the same
functionality (logic) in both nodes.
The enhanced processing development license gives service providers the right to
develop their own processing schemes using the enhanced processing node.
The node can also be used as a runtime node when EHPT or EHPT channel partners
are implementing the processing to be applied.
3.5.4 Enhanced Format Builder
The Enhanced Format Builder (EFB) is a graphical tool designed to facilitate the
production of ASN.1 format definition files. EFB is used to build, edit and
verify the format definition files that define the structure of incoming,
internal and outgoing data in BMP.
3.5.5 BMP Development Environment (EHPT BMP DevKit)
With the proven BMP development environment, introducing completely new
collectors is easy. It is also possible to introduce completely new processing
or distribution features and to customise BMP to customer-specific needs.
[GRAPHIC OMITTED]
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -78-
--------------------------------------------------------------------------------
Exhibit 4(b)(ii).10(2)
Enclosure I
Sub-License Agreement
for the
Contract for Implementation
and Service Delivery of the
EHPT Billing Mediation Device
signed according to ss.269, article 2 of Commercial Code between
EuroTel Bratislava, a.s.
and
Cap Gemini Ernst & Young
Slovensko, s.r.o
January 2001
[LOGO OF CAP GEMINI ERNST & YOUNG]
Cap Gemini Ernst & Young Slovensko, s.r.o.
Xxxxxxxx xxxxx 00/X, 000 00 Xxxxxxxxxx
Tel.: x000-0-000 55 678
Fax: x000-0-000 55 680
CLEN CAP GEMINI ERNST & YOUNG INTERNATIONAL
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Enclosure I - Sub-License Agreement
Table of contents
1 Contractual parties......................................................4
2 Contract documents.......................................................5
3 Definitions..............................................................5
4 The Software.............................................................6
5 The License..............................................................6
6 The Right to Use the Software............................................6
7 Restrictions.............................................................7
8 License fees.............................................................8
9 Infringements............................................................8
10 Warranty, liability......................................................9
11 Confidentiality..........................................................9
12 Termination.............................................................10
13 Governing law, disputes.................................................10
14 Approvals...............................................................10
Content Appendix I.........................................................13
1 Introduction............................................................15
2 System Overview.........................................................16
2.1 Collection, Processing and Distribution..............................16
2.2 EHPT BMP Definitions.................................................17
2.3 BMP Overview.........................................................18
2.4 BMP IP Overview......................................................19
2.5 BMP for convergence..................................................21
3 BMP.....................................................................23
3.1 Using BMP............................................................23
3.2 Collection...........................................................24
3.3 Processing...........................................................26
3.4 BMP, Additional Functionality........................................41
3.5 Tools - Implementation and Adaptation................................44
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -3-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Enclosure I - Sub-License Agreement
1 Contractual parties
EuroTel Bratislava a.s
Xxxxxxxxxxx 00,
Xxxxxxxxxx, 000 00
Xxxxxx Xxxxxxxx
ICO: 35705019
DIC: 35705019/600
Bankove spojenie XX, Bratislava
(in following "Eurotel" or "client")
represented by
Xx. Xxxxx Xxxxx, Chief Executive Officer/Procurator and
Xx. Xxxxxx Xxxxxx, Chief Financial Officer/Procurator
and
Cap Gemini Ernst & Young Slovensko, s.r.o.
Xxxxxxxx 00/X
Xxxxxxxxxx, 000 00
ICO 35 741 538
DIC 35 741 538/600
Bankove spojenie, Tatra banka, a.s., Bratislava, Mileticova ul.,
Account Nr. No. 28 21 00 00 66 /1100
represented by
Xx. Xxxxxxxxx Xxxxxx, Managing Director and
Mr. Elemir Xxxxxx, Procurator
Correspondence address
Cap Gemini Ernst & Young Slovensko, s.r.o.
Xxxxxxxx 00/X
Xxxxxxxxxx, 000 00
(in following "Cap Gemini Ernst & Young Slovensko, s.r.o." or
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -4-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Enclosure I - Sub-License Agreement
"CGEY")
EuroTel Bratislava a.s., referred to below as EuroTel and Cap Gemini Ernst &
Young Slovensko s.r.o referred to below as CGE&Y have today entered into the
following agreement regarding BMP software licenses.
2 Contract documents
This Sub-license Agreement consists of the following two parts:
o This Sub-License Agreement
o BMP 4.1 Product Description (Appendix I)
The parties will sign a separate agreement, Agreement Project Work, covering
implementation services for the Software.
3 Definitions
Agreement means this Sub-License Agreement, agreed and signed between the
Parties including Appendices and enclosures.
EHPT means the company that has an office at Johan Wellinsgatan 6 in
Gotenburg, Sweden. EHPT has developed the Software and is
delivering the Software to CGE&Y as a sub-supplier
Software means the EHPT BMP 4.1 Mediation Device Software, further defined
in ss.3 of this Agreement and in Enclosure 1
System means all Hardware and Software
RTU means right to use
RTC means right to connect
Order Date is defined as the date of signature of this Agreement
BMP means a multi-service Mediation Device system from EHPT that
provides Telecom Operators, such as EuroTel, with a solution to
collect, process and distribute service usage data in all networks
VPN means Virtual Private Network
Subscriber A basic rule (for fixed and mobile subscribers): A subscriber is
defined to be the number of telephone numbers from active users
that generate CDR's managed by the Operator. Thus in the
residential case, there may be one or two telephones for each
residential user. A large corporate subscriber though (even though
they are one corporate subscriber) will actually have many
telephone numbers in their VPN and it is these
subscribers/telephone numbers that should be used in the RTC
calculation.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -5-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Enclosure I - Sub-License Agreement
CDR A CDR is defined as an incoming call data record. Outgoing CDR's
are not considered.
4 The Software
According to an agreement with the company EHPT, CGE&Y is entitled to
sub-license the computer software product BMP (the Software), a Mediation Device
system for the telecommunications market.
CGE&Y grants the following software licenses to EuroTel:
EHPT BMP Software Packages
License of BMP 4.1 and 4.2 Base System including Collection from disk,
Processing, Distribution to disk, Inter BMP collection and Inter BMP
distribution. The license consists of:
o RTU for eight (8) concurrent users on one (1) BMP server. Right To Use
(RTU) software licenses are based on delivered functionality and on the
number of servers.
o Connection License fees or Right to Connect (RTC) gives EuroTel the right
to connect up to five (5) Nodes to BMP and process up to 1 000 000 CDR's
per day. CDR's per day is calculated as the average number of CDR's per
day during one calendar month.
o One AXE/MTP or FTAM collector on one (1) BMP server
o One FTP collection on one (1) BMP server
o One FTP distribution on one (1) BMP server
o One EHPT BMP High Availability RTU license on two servers for
- Sun Cluster 2.2
- Veritas Volume Manager VxVM 3.04
- Veritas File System VxFS 3.3.3
5 The License
CGE&Y grants to EuroTel a non-exclusive, non-transferable right to use the
Software for an unlimited period of time in accordance with the conditions laid
down in this Sub-License Agreement.
EuroTel acquires no intellectual property right to the Software or any portion
thereof through this agreement.
6 The Right to Use the Software
EuroTel may use the Software in object form only and for the sole purpose of
using the Software in EuroTel's own business as a telecommunication operator.
The right to use the Software is limited to one production copy and four (4)
backup copies of the Software at one installation site.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -6-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Enclosure I - Sub-License Agreement
7 Restrictions
EuroTel undertakes:
a) to accept that no ownership rights to the Software are transferred to
EuroTel;
b) not to use the Software otherwise than as part of the equipment or
software in which the Software has been incorporated or for which it has
been delivered;
c) not to distribute any copy of the Software or disclose any Confidential
Information (including results of benchmark tests run on the software by
sub-licensee) to any third party, except as stated in this Agreement,
d) not to assign the sub-license agreement without prior written approval of
CGE&Y.
e) not to remove any proprietary, copyrights, trade secret or warning legend
from any Software or copies thereof;
f) to reproduce on any copy of Software all copyright notices in or on the
original Software;
g) not to copy any Software, except for four (4) copy for internal archival
or back-up purposes,
h) not to decompile or reverse engineer Software except to the extent
required by law to obtain interoperability with other independently
created computer programs and under the condition that EHPT is not able to
provide such information,
i) not to furnish any Software into any country in violation of national
export control regulations,
j) not to make the Software available on any timesharing or other rental
arrangements,
k) to accept that no warranties, express or implied are given on behalf of
EHPT or Licensors of EHPT,
l) to accept that EHPT or Licensors of EHPT shall not be liable for any
damages, whether direct, indirect, incidental or consequential arising
from the use of the Software,
m) to report any changes in the use of the Software and to place orders when
necessary in accordance with instructions provided by CGE&Y,
n) to accept that at the termination of the sub-license all use of the
Software and the Documentation shall cease and all copies of the Software
and the Documentation shall be destroyed or returned to CGE&Y, and
o) to accept that the Software is not specifically developed, manufactured or
licensed for use in the planning, construction, maintenance, operation, or
use of:
o Any nuclear facility;
o The flight, navigation, or communication of aircraft, air traffic control
or ground support equipment;
o Other hazardous applications.
o Neither EHPT, nor CGE&Y, shall be liable for any claims or damages arising
from such use of the software. EuroTel agrees to indemnify and hold CGE&Y
and EHPT harmless from any claims for losses, costs, damages, or liability
arising out of or in connection with the use of the Software in any such
hazardous applications
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -7-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Enclosure I - Sub-License Agreement
Further, EuroTel acknowledges that CGE&Y as well as EHPT in addition to any
other remedies CGE&Y may have, is entitled to seek enforcement of this software
license agreement against EuroTel.
8 License fees
All rights granted under this Agreement with respect to the Software are subject
to CGE&Y receiving the license fee in full for the average number of incoming
CDR's per 24 hours calculated over a calendar month registered in the Software.
If the number of CDR's registered in the Software exceeds 1 million EuroTel will
pay the RTC fee according to the then valid price list from EHPT.
Every six months EuroTel shall submit a statement in writing to CGE&Y detailing
the average number of incoming CDR's per 24 hours calculated over a calendar
month registered in the Software. Should EuroTel be in default with this
obligation, CGE&Y shall be entitled to charge EuroTel for the next higher CDR's
level. EuroTel shall then have the right and the burden to prove that the actual
number of CDR's is less. The license fee structure is described in the Project
Work Agreement.
9 Infringements
CGE&Y shall at its own expense defend or settle any just and lawful claim,
lawsuit, action or proceeding brought against EuroTel to the extent that such
claim, lawsuit, action or proceeding is based on a just and lawful claim that
the Software or any portion thereof infringes or constitutes the wrongful use of
an intellectual property right of any third party. In such case CGE&Y shall be
liable to compensate EuroTel for the direct damages suffered by EuroTel because
of such infringement. CGE&Y shall be entitled to replace or modify the Software
to a necessary extent, in order to stop the infringement or to procure the right
for EuroTel to continue using the Software.
EuroTel shall notify CGE&Y in writing of any infringement claim promptly after
EuroTel first learns of it and shall provide CGE&Y with such co-operation and
assistance as CGE&Y may reasonably request from time to time in connection with
the defence thereof. CGE&Y shall have sole control over the defence including
the right to settle such claim on behalf of EuroTel on any terms CGE&Y deems
desirable.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -8-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Enclosure I - Sub-License Agreement
10 Warranty, liability
CGE&Y warrants that the Software has the functionality specified in Appendix I
and is complete as defined in ss.3. CGE&Y shall have no other liability or
responsibility whatsoever under this agreement and any other or extended
warranty shall be expressly agreed in a delivery agreement between the parties
or an equivalent document.
CGE&Y's liability under this agreement shall in any case, except as provided in
ss.6 Restrictions, be restricted to reimbursing EuroTel the amount initially
paid to acquire this software licence.
Irrespective of the legal cause CGE&Y shall have no liability under this
agreement for any indirect damages, including but not limited to consequential
damages, loss of profit and exemplary or incidental damages.
However this limitation does not apply in cases of wilful action and gross
negligence.
11 Confidentiality
EuroTel shall use its best efforts and shall take all reasonable steps to
protect the Software - the Software meaning the Software as a whole or any
portion thereof - and all documents, manuals and data related thereto and any
other information duly marked confidential or any portion of such information
(Related Information) from any use, reproduction, publication disclosure or
distribution except as authorised by this agreement. Except pursuant to this
agreement or a delivery agreement between the parties regarding a system
including the Software or an equivalent agreement, EuroTel agrees not to
disclose to or permit any third party to access the Software or any Related
Information, without CGE&Y's prior written permission.
EuroTel shall not remove, alter, cover or obfuscate any copyright notice,
trademark or other intellectual property rights notice placed by EHPT or CGE&Y
in or on the Software or Related Information and shall insure that all such
notices are reproduced on all copies of the Software and Related Information
made by EuroTel. EuroTel shall comply with reasonable directions submitted by
CGE&Y from time to time regarding the form and placement of copyright notices
and other proprietary rights notices on the Software and Related Information
The obligations set out in this section shall not apply to
o information independently developed without reference to the
Software or Related Information,
o information in the public domain,
o information obtained from a third party without a breach of
confidentiality.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -9-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Enclosure I - Sub-License Agreement
12 Termination
CGE&Y shall be entitled to terminate this agreement with immediate effect, in
case of substantial breach of any of the provisions of the agreement on behalf
of EuroTel or if EuroTel becomes insolvent or enters into bankruptcy.
In no case will CGE&Y be required to reimburse EuroTel any part of the license
fee.
On termination of this agreement EuroTel shall immediately restore to CGE&Y the
Software and all materials belonging to it.
Conditions regarding restrictions as to the use of the Software, intellectual
property rights and confidentiality shall remain in force after the termination
of this agreement regardless of the cause of the termination.
13 Governing law, disputes
This enclosure shall be governed by, and construed in accordance with, the laws
of the Slovak Republic. Any dispute or discrepancy in the interpretation or in
the performance hereof, shall be resolved through mutual discussion. In the
event that such resolution of the dispute or discrepancy is not achieved within
20 days from the beginning of the dispute, any contractual party has the right
to propose court proceeding at a responsible court.
Issues, not covered by this contract shall be administrated in accordance to
legal regulations of the Civil Code and Commercial Code.
Cap Gemini Ernst & Young Slovensko, s.r.o. guarantees to start the project
within 1 week from signing of the contract.
The parties hereof declare that they have read the wording of this contract
thoroughly and consistently, that they have understood its contents and that
this document expresses their free and serious will without mistakes. The
parties hereof acknowledge this by the signature of person fully authorised and
entitled to act on behalf of the parties hereof.
14 Approvals
This agreement comes into effect on signing by both parties.
Bratislava, 2nd March, 2001
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -10-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Enclosure I - Sub-License Agreement
.................................... .........................................
Xxxxx Xxxxx Xxxxxxxxx Xxxxxx
General Director Managing Director
EuroTel Bratislava a.s. Cap Gemini Ernst & Young Slovensko s.r.o.
.................................... .........................................
Xxxxxx Xxxxxx Elemir Xxxxxx
Chief Financial Officer/Procurator Procurator
EuroTel Bratislava a.s. Cap Gemini Ernst & Young Slovensko s.r.o.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -11-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
APPENDIX I
BMP 4.1 Product Description
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -12-
Content Appendix I
1 Contractual parties......................................................4
2 Contract documents.......................................................5
3 Definitions..............................................................5
4 The Software.............................................................6
5 The License..............................................................6
6 The Right to Use the Software............................................6
7 Restrictions.............................................................7
8 License fees.............................................................8
9 Infringements............................................................8
10 Warranty, liability......................................................9
11 Confidentiality..........................................................9
12 Termination.............................................................10
13 Governing law, disputes.................................................10
14 Approvals...............................................................10
Content Appendix I.........................................................13
1 Introduction............................................................15
2 System Overview.........................................................16
2.1 Collection, Processing and Distribution..............................16
2.2 EHPT BMP Definitions.................................................17
2.3 BMP Overview.........................................................18
2.4 BMP IP Overview......................................................19
2.5 BMP for convergence..................................................21
3 BMP.....................................................................23
3.1 Using BMP............................................................23
3.2 Collection...........................................................24
3.3 Processing...........................................................26
3.4 BMP, Additional Functionality........................................41
3.5 Tools - Implementation and Adaptation................................44
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -13-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
[LOGO OF EHPT]
EHPT BMP
Version 4.1
[GRAPHIC OMITTED]
NOTICE
The content of this document is subject to revision without notice
due to continued progress in methodology, design and manufacturing.
EHPT Sweden AB shall have no liability for any errors or damage of
any kind resulting from the use of this document. All registered and
unregistered trademarks mentioned are the sole property of their
respective owners.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -14-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
1 Introduction
EHPT BMP, developed by EHPT, is an open, multi-service, multi-platform mediation
system that provides you with a flexible, accurate, scalable, and user-friendly
solution for collecting, processing, and distributing service usage data in all
networks.
This open and highly flexible system collects service usage data from many
different networks and different network elements. In an IP network it collects
the data from for example routers, gateways/gatekeepers, web servers and mail
servers. The collected usage data - for Internet, wireline, wireless (including
GPRS) and other network services - is combined into, and flexibly managed by, a
single common billing mediation solution. This solution can be based on one BMP
system or several distributed BMP systems. Besides distributing the usage data
traditionally to billing systems, the BMP solution also processes and
distributes the usage data to other downstream client applications, such as
Fraud and Call Analysis.
[GRAPHIC OMITTED]
Figure 1 EHPT BMP
EHPT BMP:
Make you prepared for unknown business demands
BMP is designed to support your growing business. Maximum flexibility and
scalability enable you to concentrate on expanding your business.
Shortens your Time To Market
The powerful adaptation tools in BMP make it easy to introduce new services and
network elements. And since EHTP BMP isolates your network from your business
applications, you can make changes without disrupting normal operations.
Enables service convergence
BMP collects data from all networks - fixed, mobile, GPRS, Internet and others.
BMP facilitates the transition to the world of IP.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -15-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Is easy to use
BMP's graphical user interface has been designed in collaboration with service
providers and is extremely easy to use. BMP has help and user documentation
online.
Is proven
BMP has been operational for several years, providing reliable mediation for
more than 80 service providers around the world.
2 System Overview
2.1 Collection, Processing and Distribution
The BMP mediation system has three major features for handling service usage
data collection, processing, and distribution.
[GRAPHIC OMITTED]
Figure 2. Overview of EHPT BMP
2.1.1 Collection
BMP collects usage data - automatically and on-line - from multi-service
networks.
2.1.2 Processing
BMP has powerful processing features to prepare the usage data for the
downstream systems by, for example, making sure that the usage data is correct,
adapting the usage data to specific needs and enriching the usage data e.g. with
pre-rating information.
2.1.3 Distribution
BMP can transfer multiple streams of usage data records to different downstream
application systems.
2.1.4 Two BMP Modules
Pricing models will change when service providers enter the new convergent
world. Mediation devices must be able to handle both CDRs and IPDRs. Service
providers in the Internet arena will have different requirements compared to
traditional telecom service providers.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -16-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
The Internet is far more complex, with unlimited types of applications and
services. In the IP world there is no equivalent to the circuit-switched CDRs,
which are necessary to xxxx for IP services successfully. The Internet operates
in real-time and customer usage must be collected in the same manner.
BMP therefore has two modules, BMP and BMP IP. BMP is used in a traditional
circuit-switched (Fixed, Mobile including GPRS) environment. BMP IP is used in
an IP (packet-switched) environment. In a convergent solution both modules are
used.
[GRAPHIC OMITTED]
Figure 3. Overview of BMP
2.2 EHPT BMP Definitions
A brief description is given in this section to help the reader understand the
BMP specific (and some other) terms used in this document.
2.2.1 Job
It is necessary to construct a job to manage the flow of data according to a
customer's business rules. A job consists of the collection, processing, and
distribution of usage data.
2.2.2 Group
A BMP job is divided into three functional groups: collection, processing, and
distribution. The job procedures are separated into these groups.
2.2.3 Collection group
A collection group can consist of one or several collection nodes.
2.2.4 Processing group
A processing group can consist of one or several processing nodes. It is not
mandatory to
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -17-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
have a processing group in a job.
2.2.5 Distribution group
A job can have several distribution groups, each containing one distribution
node.
2.2.6 Nodes
The nodes represent sub-processes and are shown as icons in the User Interface.
The user can choose between different collection, processing, and distribution
nodes to constitute the job.
CDR
Call Detail Record. An accounting record produced by circuit switches (including
GPRS) to track Call Type, Time, Duration, Facilities used, Originator,
Destination, etc. CDRs are used for customer billing, rate determination,
network monitoring and facility capacity planning.
IPDR
Usage Detail Record. An IPDR is the "IP" equivalent of a CDR. The BMP IP module
produces IPDRs.
2.3 BMP Overview
In voice networks Call Detail Records (CDRs) are produced by the Network
Elements. CDRs are collected by the multivendor set of collectors for voice
switches that are available in BMP. CDR files are broken down into individual
CDRs, which can be uniquely processed with the comprehensive set of processing
functionality available. Once the CDRs have been processed and are ready for
distribution, they can be distributed to any desired Post Processing System, for
example a Billing System.
[GRAPHIC OMITTED]
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -18-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Figure 4. Overview of BMP system
2.3.1 Collection
BMP collects usage data - automatically and on-line - from multivendor networks
as well as from other BMP systems. BMP has "off-the-shelf" collectors for
switches from all major vendors.
2.3.2 Processing
BMP has powerful processing features for copying, formatting, merging,
filtering, validating, streaming, modifying, and consolidating usage data. With
the integrated Business Rules Builder, customer-specific processing flows can be
created or changed through a Graphical User Interface (GUI) by combining icons
representing different processing options.
Processing includes an enhanced processing feature, which is an extremely
flexible building block that makes it possible to apply virtually any
user-defined processing in BMP.
2.3.3 Distribution
BMP can transfer multiple streams of individual data records or data files to
different downstream application systems by using a number of different
protocols.
2.3.4 BMP, Base System
The BMP Base System contains the base capabilities of BMP, for example logging,
GUI and scheduling. The scheduler serves as a central control point that, among
other things, starts and maintains jobs and handles the user's requests.
2.3.5 Additional BMP functionality
With the high availability configuration, two BMP systems, each running separate
jobs during normal operation, back each other up in case of a single point of
hardware failure.
With the CDR Repair system, CDR files can be viewed and edited.
2.3.6 Remote Management & Additional Management Applications
BMP web manager application for remote management. BMP provides interfaces for
remote management of one or several BMP systems from a central location.
Management systems based on SNMP and BNSI can also be utilized.
2.4 BMP IP Overview
The old rules of the circuit-switched network do not apply in the IP world. The
Internet is far more complex, with unlimited types of applications and services.
In the IP world there is no
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -19-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
equivalent to the circuit-switched CDRs, which are necessary to xxxx for IP
services successfully. The Internet operates in real-time and BMP IP collects
data in the same manner.
BMP IP enables you to charge for usage by collecting IP network transactions in
real-time, filter away unnecessary information, aggregate information from
different sources and create IPDRs (equivalent to the circuit-switched CDRs). An
IPDR is handled in the same way as a CDR when distributed to BMP and all
functionality that can be used for a CDR can also be applied for an IPDR.
[GRAPHIC OMITTED]
Figure 5. Overview of BMP IP system
For more details on BMP IP please see the BMP IP product description.
2.4.1 Collection
BMP IP collects IP transaction data (events) from IP networks -- in real-time.
2.4.2 Processing
The BMP IP processing features consist of filtering, aggregation and creation of
IPDRs. IPDRs can be created either based on time, where the time interval for
creating the IPDR is configurable from sub-seconds to x hours. IPDRs can also be
closed based on the whole log-in period, for e.g. a dial-up connection.
IPDRs can be created according to the IPDR standard, see xxx.xxxx.xxx, or any
other customised format.
2.4.3 Distribution
BMP IP can distribute the created IPDRs real time to a dedicated IP billing
system, or to BMP where the IPDRs can be processed utilizing the comprehensive
set of functions available.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -20-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
2.4.4 BMP IP Base System
The BMP IP Base System contains the base capabilities of BMP, for example
logging, a GUI and security mechanism.
2.4.5 Remote Management & Additional Management Applications
The BMP web manager application can be used for management, i.e. alarms and
status of the BMP IP jobs running. The BMP web manager provides interfaces for
remote management of one or several BMP systems from a central location.
2.5 BMP for convergence
The figure below illustrates an example of a GPRS mediation case when both BMP
and BMP IP are prerequisites for a convergent billing solution. In the example,
a service provider is charging for delivered quality when providing a specific
type of WAP service, for example stock exchange information. The GPRS node
provides information about delivered quality which is then captured by BMP. BMP
IP provides information about who accessed what and for how long. This
information must be consolidated before it can be sent to the billing system.
BMP and BMP IP are the enablers for convergent billing.
In a convergent environment, where different types of networks, both packet and
circuit switched, need to be interfaced for usage data the solution is to use
both BMP and BMP IP.
BMP IP is designed to work together with BMP as a pre-collector. This
pre-collector can be seen as an advanced collector which internally also
contains processing. BMP IP deals with the real-time requirements for capturing
the transaction data in an IP network and the creation of IPDRs. These IPDRs can
be further processed by BMP and can be consolidated with the CDRs from a voice
network as well.
[GRAPHIC OMITTED]
Figure 6. Overview of a convergent BMP solution
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -21-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
Below shows a mediation case for GPRS when both BMP and BMP IP are a
pre-requisite for a flexible convergent billing solution. The example below
shows a service provider charging for Quality delivered when providing a
specific type of WAP service. For example stock information. The GPRS node
provides information about Quality delivered. This is captured by BMP. BMP IP
provides information about who has accessed what, during which time period. This
information has to be consolidated before it can be sent to the billing system.
BMP and BMP IP are the enablers for convergent billing as described.
[GRAPHIC OMITTED]
Figure 7. Convergent consolidation
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -22-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
3 BMP
3.1 Using BMP
Graphical User Interface (GUI)
The user can access all functions associated with the features that the BMP
system provides using X-Motif style windows in the GUI.
The BMP main window, which is displayed once the system has been started, has
menus that allow the user to access the following main operational areas of the
BMP system:
o System
o Maintenance
o Job
o Inspect
[GRAPHIC OMITTED]
Figure 8. Example from BMP's graphical user interface
3.1.1 System
The system menu allows the user to set generic parameters for network elements
and the BMP applications. The user can also open new functional features added
to the BMP system, or view a list of the functional features that the BMP system
is licensed for.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -23-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
3.1.2 Maintenance
The maintenance menus allow the user to perform maintenance of parameters for
the collection, processing, and distribution features of the BMP system, such
as:
o Network elements, external BMP systems, and Post-Processing Systems
(downstream systems)
o Criteria for format translation, CDR sequence number validation,
selection, validation, etc
o Privileges for BMP system users
3.1.3 Job
The job menu allows the user to construct a BMP job by selecting icons from a
palette, placing them in a job control window, and connecting them to perform
the required functions for the collection, processing, and distribution of CDRs.
Multiple job handling allows several jobs to be controlled at the same time.
In the job monitor window, the user can monitor information about the jobs he or
she is interested in.
3.1.4 Inspect
The Inspect menu allows the user to view or configure the BMP logs.
3.1.5 Help
The help menu displays a window that provides information to guide the user in
the operation of the BMP GUI.
3.2 Collection
BMP uses collectors to collect usage data that is to be processed and
distributed to a specific directory, to a downstream client application or to
another BMP system.
Data can be collected from different network elements from different vendors.
For circuit-switched networks BMP provides:
o FTP Collection
o - Collects from NE's running standard FTP
- Collects from Rescission Adjunct Processor using FTP
- Collects from Nokias WAP Gateway using NAMP protocol
o FTAM Collection
o Collects from all major switches using FTAM, such as Lucent 5ESS,
Ericsson AXE, Siemens EWSD, Alcatel S12 or E10, Nokia DX200 and
others
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -24-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
o Proprietary Collection:
- MTP from Ericsson AXE switches
- XFER and AFT from Nortel DMS switches
- AMATPS for Lucent 5ESS
- NEC NEAX
o Hot Billing:
- DFO from Ericsson AXE switches
- DMH (IS-124) from switches utilizing DMH
o Disk Collection
o InterBMP Collection (collection from other BMP systems)
Hot billing collection means CDR by CDR collection instead of CDR file
collection. BMP supports hot billing collection from AXE using DFO and hot
billing collection from network element utilizing the DMH standard.
The collection function supports duplicated file detection and ensures that
files are not collected more than once.
A WAP Gateway is an enabler of advanced services: it is the access point between
the wireless world and the internet/intranet world. BMP collects mediation data
from Nokias WAP Gateway via FTP.
[GRAPHIC OMITTED]
Figure 9. Circuit-switched Collection
EHPT and its channel partners are constantly adding new collectors to BMP using
the BMP Development Environment. If a desired collector does not exist in BMP, a
new collector specific to a certain network element can easily be developed.
3.2.1 Post Collection Notification
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -25-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
BMP offers the possibility to start a script or a binary when a file has been
collected. The script will be executed before the CDR file is transferred to the
processing (or distribution) node.
3.3 Processing
BMP provides a set of standard processing tools as part of its core functions.
BMP supports the following processing functions:
o Format translation
o Selection
o Validation
o Unique ID generation
o CDR Sequence order validation
o Duplicate CDR detection
o Time gap detection
o Merge
o CDR file header/trailer generation and validation
o Bursting
For further enhanced processing, the Enhanced Processing Nodes provide features
for:
o Assignment
o Database look-up
o Consolidation
o Consolidated usage reports
These features will be further explained in the sections below.
[GRAPHIC OMITTED]
Figure 10. BMP Processing
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -26-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
3.3.1 Format Translation (Decode/Encode)
The proven format translator is a key architectural component of BMP. The format
translator translates usage data input formats into a format required by the
receiving downstream system. It does this by converting usage data received from
the external network elements to an internal ASN.1 format (decode process) and
then to a user-defined external format (encode process) that matches the
downstream system.
This function can be used to translate all external service-related data from
multi-vendor switches into a common billing format.
BMP provides capabilities to change the order of the CDR fields, to remove
fields and change the data representation. It is also possible to add new
fields.
BMP's processing features require an internal CDR format to be defined using the
ASN.1 format definitions. BMP can translate virtually any type of incoming
format to ASN.1, and convert the internal ASN.1 format to any outgoing format.
3.3.2 Decoding
Files that BMP has collected from network elements or other external systems and
which require processing are converted to BMP's internal ASN.1 format.
If the BMP installation has the Enhanced Format Builder, see chapter 3.6.4. The
user can create customized mapping definitions. These mapping definitions can
then be used to do conversions from various source formats to BMP's internal
format.
3.3.3 Encoding
Files that BMP has processed are converted from the BMP ASN.1 format to an
external format before distribution.
If the BMP installation has the Enhanced Format Builder, see chapter 3.6.4 the
user can create customized mapping definitions. These can then be used for
making conversions from the BMP internal format to various destination formats.
It is possible to define different output formats so that information can be
transferred to multiple destinations. New format definitions may be performed in
runtime without affecting your current revenue flow.
All BMP format conversions conform to the ASN.1 format definitions.
3.3.4 Selection
BMP retrieves CDRs collected from a remote system. The selection feature streams
or filters
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -27-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
CDRs to other processing features, or to a file for further distribution to an
external system. The selection feature uses Boolean operators, comparison
(equal, not equal, less than, less than or equal to, greater than, greater than
or equal to) operators and regular expressions to filter whether field values
are included or not included in a defined set of values.
The selection nodes have two outputs: true or false. Each of the two outputs may
distribute CDRs to many other nodes.
The user can edit existing selection criteria or create new criteria in the
Graphical User Interface (GUI).
3.3.5 Validation
The validation feature checks if particular fields of a CDR are within a defined
logic or range of values in order to filter out those CDRs that do not meet the
validation criteria. A separate error file logs the CDRs that do not meet the
validation criteria. The CDRs can also be forwarded if so desired.
The validation function performs two levels of validation on usage data: format
validation (syntactic level), and business rule validation (logical level).
Business rule validation occurs at configured processing points, and can be used
to decide, for example, if a count or duration value is within "reasonable"
bounds.
Validation rules are composed of many expressions where Boolean operators can be
used to decide whether an expression is true or false. BMP can also store these
expressions in a file, which can be read and interpreted to allow for more
flexibility.
The user can edit existing validation criteria or create new criteria in the
Graphical User Interface (GUI). The parameters that can be checked for
individual fields within a record are:
o Value out of range
o Unknown value
o Field length invalid
o Value not included in a predefined set
The user can carry out further handling on the error records that BMP has saved
in a user-defined directory.
BMP allows for the same CDR information to be 'burst' to multiple locations.
This can be useful when more than one downstream PPS is interested in the same
information or a subset of it.
3.3.6 CDR Sequence Order Validation
The CDR sequence order validation feature ensures the sequential processing of
CDRs and that no CDRs in the CDR stream are missing or duplicated. The user can
specify the number
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -28-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
of error records ("out of sequence" records) which are accepted before
processing is aborted. BMP removes the error records from the stream and saves
them in a user-configurable directory.
CDR sequence order validation can be applied to CDRs containing a sequence
number field.\
3.3.7 Unique ID Generation
The unique ID generation feature inserts a unique ID in the CDRs for all switch
and service types collected by BMP. A data warehouse, for instance, could
require a unique ID.
3.3.8 Duplicate CDR Detection
The duplicate CDR detection feature ensures that no CDRs are duplicated in the
CDR stream. Duplicate checking can be done both within the same file and between
multiple files. The criteria for considering a CDR to be a duplicate are defined
by the user in the BMP GUI. Duplicate CDRs are stored in an error directory.
3.3.9 Time Gap Detection
The time gap detection feature ensures that there is an acceptable time gap
between two CDRs by comparing the time stamps in the CDRs. The function checks
the minimum and maximum acceptable time gaps between consequential CDRs. The
checking is also done between CDR files, i.e. between the last CDR of one file
and the first CDR of the next. Time Gap Detection can be used to validate that
CDRs are not missing.
3.3.10 CDR File Header/Trailer Generation & Validation
The header/trailer validation feature checks if particular fields of a CDR file
header/trailer are within a defined logic or range of values. Header/trailer
generation makes it possible to generate a new CDR file header and trailer or
modify the contents of an existing one. This is done by assigning values to new
fields in the header/trailer, modifying existing fields or concatenating
existing fields. The enhanced processing node can be used to extract information
from every CDR in a file, which can be used later on in header/trailer
generation.
3.3.11 Merge
Merge is a processing function in BMP that combines several input usage files
into a single, larger output file.
3.3.12 Enhanced Processing - Enhanced Processing Node
Enhanced processing is an extremely flexible building block, which makes it
possible to implement virtually any processing needed.
Enhanced processing in BMP consists of two different nodes, one based on the
JAVA programming language and one on the industry standard TCL script language.
It is possible to
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -29-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
apply the same functionality (logic) in both kinds of node.
The Java node has been extended with a number of pre-defined classes and the TCL
node with a number of pre-defined primitives that give BMP the capability for
example to modify field values, access databases (for instance a subscriber
database) or do more complex format conversions. Enhanced processing also
provides capabilities for doing consolidation of partial CDRs and creating
consolidated usage reports by extracting relevant information from the CDRs.
Enhanced processing could be offered as a runtime license, i.e. EHPT or an EHPT
channel partner will do the set-up, or as a development license allowing the
service provider to define their own processing criteria.
3.3.13 Assignment
Assignment makes it possible to modify the contents of a CDR by adding fields,
assigning values to new fields, modifying already existing fields or
concatenating existing fields.
BMP supplies standard library functions (classes in Java and primitives in TCL)
for the most common and straightforward assignment of new values. Arithmetic
operations are also supported.
3.3.14 Database Look-up
The database look-up feature makes it possible to search internal or external
databases. The information gathered could be used for validation purposes or to
assign new information to existing fields in a CDR. TCL script primitives or
JAVA classes are available for the more common types of database searches.
BMP can retrieve values from the database and use return values to assign these
to new fields in the CDR.
[GRAPHIC OMITTED]
Figure 11. Database Look-up
3.3.15 Consolidation
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -30-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
The consolidation function consolidates partial CDRs. It merges the CDRs that
belong to the same chargeable call into one CDR, typically long duration calls
or calls that go on during the "midnight shift", and sends it to the downstream
system. Consolidation is also a key functionality for handling both IP IPDRs and
GPRS CDRs in a GSM network, since information from many sources needs to be
consolidated into one chargeable record.
A selection node identifies the partial CDRs and sends them to the consolidation
node. The consolidation node keeps them waiting until it finds the matching
CDRs, and merges them into one.
The user can define criteria to identify the CDRs that belong to the same
chargeable call. The user can also define the criteria for how the different
fields should be merged before dispatching the consolidated CDR from the
consolidation function, for example to a billing system. It is also possible to
consolidate CDRs from different network elements.
3.3.16 Consolidated Usage Reports
By extracting information from CDRs passing a report (enhanced processing) node,
data can be extracted and stored in pre-defined tables in the BMP database. The
stored data can then be extracted and presented in customer-unique reports by
using for instance Oracle reports or an ODBC connection to Microsoft Excel or
Microsoft Access.
Examples of reports that could be created using the data in the pre-defined
table structure are:
o Total number of call minutes (or calls) per day per switch
o Total number of call minutes (or calls) per day per incoming and/or
outgoing trunk/route
o Total number of call-minutes (or calls) per hour per switch etc
o Data volumes per hour per router (when receiving IPDRs from BMP IP)
3.3.17 Error handling in the processing nodes
Behavior when decoding or processing errors occurs is configurable. The
error-handling feature provides three options:
o -Abort on Max Fail. The processing node will abort when a user
defined maximum number of erroneous CDRs has been reached. BMP
writes all erroneous CDRs to an error directory until the maximum
number is reached.
o Abort on First File. BMP writes the incorrect file to an error
directory and the processing is stopped.
o Continue with next file. BMP writes the file with the erroneous CDRs
to an error directory and automatically continues with the next
file.
The decoding node can be set up to decode as much as possible of any faulty CDR
file,
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -31-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
hence all CDRs in a file that can be decoded will be decoded and passed to the
next processing node. The remaining CDRs will be stored in a file in an error
directory.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -32-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
3.3.18 Distribution
The distribution function provides a flexible transfer of usage data files or
individual records to downstream applications, such as fraud and call behavior
analysis systems, billing and rating systems, other BMP systems, or to disks.
BMP supports:
o File transfer over FTP
o File transfer over FTAM
o Transfer of files or individual records over TCP/IP
o File transfer to disk, (local or NFS mounted)
o Transfer of files to another BMP system, using an InterBMP file and
message transfer function
[GRAPHIC OMITTED]
Figure 12. Distribution
3.3.19 Distribution File Name Templates
The distribution file name templates feature allows the user to set the names of
the files to be distributed. The feature provides many name components to choose
from, such as qualifier, source, source file, job, separator between the name
parts, and type of data.
3.3.20 Post Processing Notification
When BMP has processed the CDRs and they have been distributed, it is sometimes
necessary to alert a post-processing system, such as a billing system.
BMP offers the possibility to start a script when a file has been closed and
distributed. The user defines the script and can for example choose to send a
mail to inform the post-processing system that the file is ready.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -33-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
3.3.21 Base System
BMP base system includes the basic capabilities of BMP. These are described
below under the following headings:
o Scheduling
o Business Rules Builder
o Management
o On-line documentation
o User access and security
o Scalability
o Additional management application & Remote management
3.3.22 Scheduling
BMP provides an extensive scheduler, which allows the user to configure and
specify when BMP will perform collection, processing and distribution. The
scheduler, which is an internal subsystem of BMP, serves as a central control
point that is responsible for starting and maintaining jobs, handling requests
from the GUI and so on.
There are three types of scheduling that can be applied to the groups within a
BMP job: periodic, file close and external request. Periodic scheduling and
external request can be used for all collection, processing and distribution
groups, while file close scheduling can be used for processing and distribution
groups only.
3.3.23 Periodic Scheduling
There are three different types of periodic scheduling trigger: weekly, daily or
at an absolute time. BMP can combine multiple schedule configurations to define
a running schedule that specifies when a group within a job will be triggered.
When the time configured for the group is reached, the BMP system will start the
group.
Weekly and daily scheduling can have periodic repeat schedules according to the
setting of a repeat interval parameter. Both schedules can have two parameters,
an activation time and a repeat interval. The activation time specifies when the
schedule will become active. For a weekly schedule, this is a day of the week
plus a time of the day. For a daily schedule, it is simply a time during the
day. The repeat interval specifies the interval between each schedule trigger.
Absolute schedules have an absolute activation time, but no repeat interval
associated with them.
3.3.24 File Close Scheduling
There are two types of file close scheduling; one is based on the number of
files queued up
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -34-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
from the previous group in the job chain, the other on the number of bytes
queued up from the previous group in the job chain.
Processing and distribution groups that are configured for file close scheduling
will be triggered immediately when the specified number of files or bytes is
available.
3.3.25 External Request
Scheduling using an external request can be applied to all groups in a job, but
the procedure for using this type of scheduling is dependent on the operation of
an operator-created application.
3.3.26 Business Rules Builder
With BMP's integrated Business Rules Builder, the processing flows are created
according to the customer's specific business rules. The business rules are
created or changed easily through BMP's comprehensive GUI, by combining icons
representing the different processing, collection and distributing nodes.
3.3.27 Management
BMP provides extensive functions for operating, administrating and maintaining
the BMP system, including:
o Monitoring
o Logging
o Data management
o Exception handling, recovery and back-up
3.3.28 Monitoring
The user can access a BMP monitoring window that displays information about
active jobs. The user can specify the type of data to be displayed for the jobs.
Information can be shown about the following:
o Job name
o Group type
o Job and group identifiers
o The data file currently being processed by the group
o The source name for the collection group
o The destination name for the distribution group
o The date and time of the monitored activity
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -35-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
The monitor data is continuously updated while a job is running, and shows the
transient information as the jobs are being executed.
3.3.29 Report Mechanism, Logging
The BMP system provides four logs, which hold data about jobs, user actions,
events and errors. These are:
o Audit log
o Event log
o User log
o Error log
A BMP cleanup function periodically clears data from the user and event logs.
The data in the audit and error logs are not affected by the cleanup. Only the
BMP system administrator can remove the data.
[GRAPHIC OMITTED]
Figure 13. Logging
3.3.30 Audit Log
The audit log window displays audit information about jobs. The information
displayed is dependent on the log level set for the job, which is
user-configurable.
For a specific job, the audit log can provide information about:
o The job name
o The file name
o The number of CDRs processed by the processing nodes
o The size of a file in bytes
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -36-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
o The source of the collected file(s)
o The name of the collection group
o The icon number of the processing feature
o The date and time of the audited activity
The number of CDRs processed by the processing node are displayed as:
o Incoming number of CDRs
o Outgoing number of CDRs
o Merged number of CDRs
o Saved number of CDRs
o Deleted number of CDRs
o Modified CDRs
BMP uses the audit log to maintain historical information about the processing
of received CDR files.
3.3.31 Event Log
The event log displays information about events and for jobs. The event log
displays:
o The type of event that BMP logged, for example job started, job
stopped
o The job status, for example success or fail
o The name of the job as defined in a job definition window
o The BMP user associated with the event
o The date and time of the logged event
o Additional information concerning the event
BMP periodically clears the event log data after a configurable interval to
prevent the database from becoming full.
3.3.32 User Log
The user log displays information about actions and the user entities related to
these actions for a selected BMP user. The user log displays:
o The BMP user associated with the entry
o The selected maintenance area function manipulated
o Selected actions, for example delete, insert, log in, and logout
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -37-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
o The date and time for the log entry
o Information from the system about the logged entries
The user log shows the results of a user's interaction with the system. The type
and amount of information that BMP display is configurable. BMP periodically
clears the event log data after a configurable interval to prevent the database
from becoming full.
3.3.33 Error Log
The error log displays information about warning situations, error situations
and critical situations that have occurred in the system.
3.3.34 Data Management
The user can configure how often BMP should automatically remove files that have
been processed and distributed. BMP also surveys the database and alerts the
user when it is running out of disk space.
3.3.35 Exception Handling, Recovery and Back up
BMP stores all information about a job in its database. At a restart, BMP starts
from the last unprocessed file. For example, if a job consists of ten files and
an error occurs at file three, BMP starts with file four at start-up. BMP also
features on-line back up using internal BMP features.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -38-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
3.3.36 On-line Documentation
User documentation is provided on-line in HTML format. The BMP User Guide,
Procedure manual and System Administrators guide can be viewed on-line, with
hyperlinks to all chapters and sub-chapters, in a Netscape or Microsoft Explorer
browser.
[GRAPHIC OMITTED]
Figure 14. On-line documentation
3.3.37 User Access and Security
There are two levels of user connection and authentication on BMP systems:
o The end user has to log in to the Unix system and provide a
password. The work environment can be loaded without any possibility
of running direct command lines
o The end user has to provide a second password when connecting to
BMP\
BMP verifies the functions that are available to the user in the log on
procedure. After log-on, BMP connects with the system, and performs an authority
check. Each user has a profile (called user) which the BMP database
administrator sets up in the BMP system. This profile defines the user's
privileges for each BMP function.
BMP allows for two classes of users - the system administrator and the user.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -39-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
3.3.38 System Administrator
The system administrator manages the overall BMP network, systems and
applications. The system administrator grants user privileges according to user
level activity.
The system administrator is the only one with authority to maintain BMP user
accounts and privileges and maintain BMP licenses.
The system administrator only allows the following actions:
o Maintain users, and their access rights
o Maintain the BMP authorization key. With this key, the user unlocks
the different features in BMP
3.3.39 User
The user performs BMP node-specific operations. BMP traces user actions into a
user log. From this log, the user can at any time identify the user responsible
for each action. The user can change his or her password, if the old password
can be given.
Multiple levels of clearances provide high security. For example, it is possible
to enable/disable the following actions for each user:
o View
o Update/insert
o Delete
3.3.40 Scalability
BMP is scalable both in capacity and functionality.
Additional functionality can easily be introduced with no, or only minor,
changes to an existing BMP solution.
A single server BMP system is capable of handling a substantial volume of CDR
data and if this should not be enough, BMP can be installed in a distributed
solution containing two or more BMP systems. The system is still, however,
manageable from a central location using industry standard management tools and
specific BMP applications (see Remote Management/Additional Management
Applications).
EHPT recommends separate dimensioning for each implementation case. Factors to
consider when dimensioning a solution include: peak throughput, number of days
of on-line data storage needed, locations of servers at IT center or network
elements building, and the possible need for a high level of availability.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -40-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
3.4 BMP, Additional Functionality
3.4.1 Web Manager
The Web Manager allows the user to monitor and supervise several EHPT BMP,
Initiator and BMP/Initiator IP Systems at a time from a Web browser (Netscape
Navigator or Communicator).
From each managed system the user can view:
o the status of the system
o system statistics
o data throughput
o the status of individual jobs
o the error log.
The Web Manager presents information on two different levels: 1) a systems
overview, with information for all supervised systems and 2) a system view, with
information for one selected supervised system.
In the system overview (1) the following information is displayed:
o A table with the system state, number of jobs, number of running
jobs, and data throughput.
o A common alarm list for all systems, showing the most recent alarms.
The alarm list can be filtered by severity.
From the system view as 2) the following information is displayed:
o All jobs on this system with current state and descriptions. The
jobs can be started and stopped.
o The alarm list for this specific system. The alarm list can be
filtered by severity.
The Web Manager consists of three parts: proxy, server and client. The proxy
runs on the same server as the supervised system and handles all connections
with the supervised system. The Server handles the connections between proxy and
client. The user interface runs on the client.
3.4.2 BNSI Agent
Remote alarm surveillance from EHPT SYNERGIZER can be done using the BNSI
functionality within BMP. Alarms received from an external NE will normally be
followed by an alarm clear message. The alarm can therefore be activated or
cleared in the NE. Alarms that have no clear messages are classified as
"events". If an alarm is classified as an event no message will automatically be
sent to notify that the fault has been corrected. The BNSI Agent has the
following functionality:
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -41-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
o Alarm Message Forwarding
(BNSI Agent reads the BMP log file and translates errors into the
BMSI alarm structure).
o Alarm Filtering
(based on severity and whether the alarm should be sent or not).
o Heartbeat transmission
(The BNSI Agent can send a heartbeat if no alarms have been
forwarded within a set time limit).
3.4.3 SNMP Agent
An SNMP Agent forwards BMP errors as traps to a SNMP Manager enabling BMP to be
supervised centrally. The operator will be alerted when an abnormal event occurs
and can access information in order to take a decision on what action to take.
The functionality included in the SNMP agent is:
o Alarm Message Forwarding
(The SNMP Agent reads the BMP log file and translates alarms into
the SNMP alarm structure)
o Alarm Filtering
(At three levels: Error, Disaster, Warning)
o Configurable Polling Time
(The frequency (in seconds) at which the Agent polls the BMP log
file)
o Configurable Destination IP Address
(The destination IP of the Receiving SNMP Manager can be configured
and is read by the agent at start up)
o Configurable SNMP Trap Type
(i.e. SNMPV1 or SNMPV2 which is read at start up)
o 'The SNMP Agent does not include a MIB.
3.4.4 Job Distribution
With the script-based job distribution functionality, BMP jobs can be extracted
from one BMP system, including all set-up information for that particular job,
and transferred to another BMP system, for instance BMP jobs from a test
environment into a production environment.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -42-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
3.4.5 CDR Repair System
The BMP CDR Repair System (CDR RS) is a tool for examining, editing and
correcting erroneous CDR files to be able to reprocess them. It has an easy to
use GUI, which gives access to the following functionality:
o Encode and decode CDR files
The CDR RS encodes and decodes all ASN.1 formats that BMP supports. When opening
a file the user chooses the file format and the external format. The CDR RS then
displays the internal formats that can be mapped to the selected external
format. All formats are fetched from the BMP dB and new formats must therefore
be added with BMP Format Builder before the CDR RS can use them.
When encoding a file from the internal ASN.1 format the previous external file
format will be utilised. However, the file can also be given a new name and/or
format, leaving the original file untouched.
o Editing Data
Decoded data is displayed in a spreadsheet. Each column represents a CDR field
and each row a CDR number. New data can be typed directly into a CDR field or a
find/replace function can be utilised to enter correct data into the field. If
incorrect data has been entered or a field or a field is missing data, the field
will be marked and the user must re-enter correct data.
o Filtering data
The CDRs displayed in the spreadsheet can be filtered. A filer only applies to a
single column. Multiple filters can be added to each column.
The system can be used as a tool for basic creation of CDR data for test
purposes.
3.4.6 High Availability
To attain a high level of availability, the BMP system can provide duplicated
data links toward the network elements. To prevent any loss of data, BMP uses
mirrored disks for secure storage of all data.
To further increase availability, BMP can be configured as a high availability
system where dual computer systems back each other up. During normal run-time,
the two BMP systems work completely independently of each other and run separate
jobs, but if a single hardware failure occurs the BMP package on that particular
hardware will migrate over to the other machine. The high availability function
therefore ensures the flow of BMP operations. The hardware investment is also
fully utilized, since both servers are running during normal operation. The
configuration shown below is not the complete hardware specification, but merely
an outline of the main parts.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -43-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
[GRAPHIC OMITTED]
Figure 15. High Availability
3.5 Tools - Implementation and Adaptation
BMP provides very competitive tools for implementation and adaptation. These
tools, and a broad range of services ensure you can quickly deploy (and change)
a system adapted to your specific needs. The following tools and features exist:
Business Rules Builder, Format Builder, Enhanced Processing Node, Script
Invocations and a complete BMP Development Environment (BMP DevKit).
3.5.1 Business Rules Builder
With Business Rules Builder, processing flows can be created according to your
specific business rules. The business rules are created and changed easily
through BMP's comprehensive GUI - by combining icons representing the different
processing, collection and distributing nodes.
3.5.2 Script Invocations
There are a number of possibilities for adapting collection and distribution to
the environment that BMP is working in by invoking customer-unique scripts:
o Post Collection Notification, which offers the possibility to run a
script after a file has been collected
o PPS Notification script, which offers the possibility to run a
script when a file has been distributed
o Selection and Validation expressions can be built using the BMP GUI,
but can also be built as separate scripts.
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -44-
[LOGO OF CAP GEMINI ERNST & YOUNG] [LOGO OF EUROTEL]
--------------------------------------------------------------------------------
Appendix I
3.5.3 Enhanced Processing Node, Development License
Enhanced processing is an extremely useful tool, which enables you to virtually
implement any processing needed. Enhanced processing in BMP consists of two
different nodes; one based on the JAVA programming language and the other on the
industry standard TCL script language. It is possible to apply the same
functionality (logic) in both nodes.
The enhanced processing development license gives service providers the right to
develop their own processing schemes using the enhanced processing node.
The node can also be used as a runtime node when EHPT or EHPT channel partners
are implementing the processing to be applied.
3.5.4 Enhanced Format Builder
The Enhanced Format Builder (EFB) is a graphical tool designed to facilitate the
production of ASN.1 format definition files. EFB is used to build, edit and
verify the format definition files that define the structure of incoming,
internal and outgoing data in BMP.
3.5.5 BMP Development Environment (EHPT BMP DevKit)
With the proven BMP development environment, introducing completely new
collectors is easy. It is also possible to introduce completely new processing
or distribution features and to customise BMP to customer-specific needs.
[GRAPHIC OMITTED]
Figure 16. EHPT BMP Development Kit
--------------------------------------------------------------------------------
(C)Cap Gemini Ernst & Young Slovensko, s.r.o. Page -45-
