BACKGROUND

1
Exhibit 10.1(a)

INFORMATION DENOTED BY [*] HEREIN HAS BEEN OMITTED PURSUANT TO A REQUEST FOR
CONFIDENTIAL TREATMENT. THIS INFORMATION HAS BEEN FILED SEPARATELY WITH THE
SECURITIES AND EXCHANGE COMMISSION.

GENERAL MOTORS CORPORATION

TRANSACTION AGREEMENT

THIS TRANSACTION AGREEMENT (Transaction Agreement) is made to be
effective as of the 8th day of June, 1998 (Effective Date) by and between
General Motors Corporation, with offices at 000 Xxxxxxxxxxx Xxxxxx, Xxxxxxx,
Xxxxxxxx 00000 and FreeMarkets OnLine, Inc., with offices at 000 Xxxxxxx Xxxxxx,
Xxxxx 000, Xxxxxxxxxx, Xxxxxxxxxxxx 00000. General Motors Corporation and
FreeMarkets OnLine, Inc. are referred herein individually as a "Party" and
collectively as the "Parties."

Terms used in this Transaction Agreement with initial capital letters
are defined in Exhibit A of this Transaction Agreement or herein or in the other
Agreements, as more fully set forth in Section 17.3 herein.

BACKGROUND

The Parties have entered into the Framework Agreement governing their
overall relationship regarding the provision to Customer by Supplier of Products
and Services. The Parties have also entered into a Software Licensing Agreement
and a Consulting Services Agreement, the terms of which are incorporated into
and made a part of the Framework Agreement. Customer wishes to be provided with,
and Supplier wishes to provide, access to a global online bidding system to be
used by Customer and associated consulting services including training, CBE
management services, technical operations services, call center services and
OnLine Market Making(TM) consulting services. This Transaction Agreement is
intended to address the specific understanding of the parties related to the
Project. The Parties intend that upon full execution of this Transaction
Agreement, the terms hereof shall be incorporated into and made a part of the
Agreements. The terms of this Transaction Agreement are intended to supplement
the Framework Agreement, the Software Licensing Agreement and the Consulting
Services Agreement by defining and clarifying the Parties' rights and
obligations with respect to the licensing by Supplier of Licensed Software to
Customer and the provision by Supplier to Customer of the Services described
therein.

THE AGREEMENT

1. SCOPE OF PROJECT

1.1 GENERAL. Subject to the terms and conditions of this Transaction
Agreement, Supplier agrees to supply, and Customer agrees to license, access to
Supplier's online bidding

system and use of Supplier's BidWare(R) Software, and purchase associated
services to be used by Customer's purchasing department in North America to
enable Supplier and Certified Buyers to conduct CBEs among selected Qualified
Bidders for procurement of goods and services for Customer. The services to be
provided by Supplier shall include training of Certified Buyers and Qualified
Bidders, CBE Management services, Technical Operations services, Call Center
services and OnLine Market Making(TM) consulting services. All CBEs will be
conducted at a time mutually agreeable to Customer and Supplier.

2. SERVICES

2.1 SERVICES. Beginning on the Effective Date, Supplier will provide
the integrated set of services set forth in this Article 2 to assist Customer in
effectively utilizing the System. These services will provide Buyers with tools
to work with Supplier to conduct CBEs among Qualified Bidders for specific
pieces of business. Fees for the services described in this Article 2 are set
forth in Exhibit D.

2.2 TRAINING OF BUYERS. At times mutually agreed to by Supplier and
Customer, Supplier will provide training to Buyers designated by Customer
relating to Supplier's proprietary procedures for structuring online bids and
operating the BidWare(R) Software. All Buyer training will be held at Customer's
Sites and will bE conducted by [*****] Supplier personnel assigned by Supplier.
Each class will last for [*****] hours during normal business hours and shall
have the agenda set forth in Exhibit B. Each class will run up to twice a day
during specific periods as mutually agreed to by Customer and Supplier. A
maximum total of [*****] Buyers may attend each training class. Buyers who, as
determined by Supplier, are successfully trained will be certified by Supplier
as being a Certified Buyer. Each Certified Buyer will be given a unique user
identification number and password for the use of the BidWare(R) Software and
access to the System. The Parties agree that only Certified Buyers will be
permitted to use the BidWare(R) Software and access the System. The
certification by Supplier of a Buyer in no way shall be interpreted as a
guarantee that the Certified Buyer is able to operate and understand the CBE
process without error. Supplier shall have no liability for any act or omission
of a Buyer.

2.3 SUPPORT IN VIEWING CBES. Subject to the terms of the license grant
set forth herein, Supplier will provide copies of BidWare(R) Software for
installation on Customer's personal computers for Certified Buyers in North
America, as requested in writing by Customer, at the price set forth in Exhibit
D. Neither Supplier nor Customer will integrate the BidWare(R) Software with
existing Customer computer systems or any other computer system, nor will the
BidWare(R) Software be used on any Customer networks or any other networks under
this Transaction Agreement, except for the network designated by Supplier.
Certified Buyers will be invited to use this software to view the market
activity of the CBEs as well as print out market results and audit reports. Each
Site which is provided with the BidWare(R) Software shall be outfitted by
Customer as set forth in Section 3.2. Customer shall have the option to purchase
a BidWare(R) PC (including CPU, monitor, modem and printer) through Supplier for
each copy of BidWare(R) Software supplied to Customer as set forth on

Exhibit D of this Transaction Agreement, or to purchase its own personal
computers to run the BidWare(R) Software.

2.4 SERVICES FOR CBES. Upon the request of a Certified Buyer to use the
System to set up a CBE and Supplier's consent to the same, Supplier will provide
the following services related to such CBE:

(A) ASSISTANCE IN STRUCTURING EVENTS. Supplier will provide CBE
Management Services to Certified Buyers to assist the Certified Buyer in
structuring the CBE. "Structuring" shall include lot setting, establishing
bidding parameters and other factors relevant to the CBE. Additionally, if
requested by Customer, Supplier will provide OnLine Market Making(TM) Consulting
to Certified Buyers at a time which is mutually agreeablE to the Parties. The
CBE Management Services and the OnLine Market Making(TM) consulting services
outlined in this Section 2.4 will be billed on a variable basis and are not
included in the fixed cost of this Transaction Agreement. A description of the
OnLine Market Making(TM) consulting services and associated costs is attached
hereto as Exhibit D.

(B) INTERACTION WITH BIDDERS. Supplier will contact each Bidder
properly identified by Customer which Customer desires to participate in a
particular CBE. Supplier shall attempt to identify the appropriate Bidder
contact, and explain the bidding process to such person. Supplier will provide
the relevant Certified Buyer with reasonable feedback on the status of each
Bidder.

(C) DISTRIBUTION OF SOFTWARE TO QUALIFIED BIDDERS. Upon written
notification of the CBE, the names of the Bidders and agreement on the time line
for the CBE, as set forth in Section 3.1, Supplier will attempt to have Bidder
execute the Bidder Agreement and to license Supplier's BidWare(R) Software to
the Bidders. All licenses for the BidWare(R) Software to Bidders shall be
pursuant to the terms and conditions of Supplier's then standard license
provided with each copy of the BidWare(R) Software supplied to Bidders. A copy
of Supplier'S current license is attached hereto as Exhibit G. A Bidder shall be
considered a Qualified Bidder upon execution of the Bidder Agreement and
acceptance of the terms of the license agreement. In the event that a Bidder
does not agree to the terms of the Bidder Agreement and/or the terms of the
license agreement, the Bidder shall not be permitted to participate in the CBE.
Upon Bidder's execution of the Bidder Agreement, Supplier shall ship the
BidWare(R) Software and the BidWare Manual to the Bidder, and issue the Bidder a
unique user identification number and password to be used for the CBE, subject
to Bidder's acceptance of the license agreement. Customer shall pay the license
fee for each copy of the BidWare(R) Software licensed to Bidders. Bidders shall
be responsible for providing their own personal computers to run the BidWare(R)
Software and for the installation of such software onto such personal computers.
Bidders shall also be responsible for the connection of such personal computers
to the telecommunication service used for the CBE.

(D) TRAINING OF QUALIFIED BIDDERS. Supplier shall use commercially
reasonable efforts to identify the correct contact for each Qualified Bidder to
be trained in the use of the

3
4

BidWare(R) Software. Customer agrees to provide reasonable assistance in
identifying such person if requested by Supplier. Supplier will train that
contact over the phone using real time "mock" bidding sessions to ensure that
the Qualified Bidder is reasonably comfortable with the BidWare(R) Software and
the System. Supplier does not guarantee that thE Qualified Bidder personnel
will be properly trained and reserves the right to request that a different
person be provided by the Qualified Bidder.

(E) CONDUCT OF THE CBE. The Supplier will load all relevant CBE and
technical parameters provided by Customer into the System. During the term of
this Transaction Agreement, Supplier will staff an operations center located at
Supplier's facility in Pittsburgh to handle all CBE related activities as
follows:

(a) Maintain a call center for Qualified Bidders to call with
questions before the CBE or with technical problems during the CBE;

(b) Conduct procedures for ensuring that Qualified Bidders are
prepared and present on bid-day;

(d) Respond to Qualified Bidder problems that might prevent bidding
with a secure "surrogate bidding" system;

(e) Close bidding only after a reasonable determination that no
Qualified Bidders experienced difficulties material to the bidding process;

(f) Communicate any changes or adjustments to all Qualified
Bidders;

(g) Provide reasonable assistance to facilitate resolution of any
issues between Certified Buyers and Qualified Bidders;

(h) Establish and maintain a secure virtual private network;

(i) Authenticate the identities of all Qualified Bidders and
Certified Buyers involved in each CBE; and

(j) Ensure that only authorized Qualified Bidders and Certified
Buyers have access to appropriate CBE information.

4
5

3. CUSTOMER RESPONSIBILITY

3.1 GENERAL. At least [*****] days prior to a CBE, a Certified Buyer
shall inform Supplier of its desire to hold a CBE. Supplier and the Certified
Buyers shall agree on mutually acceptable time and date for the CBE and a time
line for conducting the CBE. The Certified Buyer shall provide Supplier, in
writing, all of the necessary information regarding the parts, materials or
services to be bid on in the CBE and identify the Bidders who will be invited to
participate in the CBE. The Certified Buyer shall also provide the applicable
completed RFQ to each Bidder and Supplier. The Certified Buyer will coordinate
with the Supplier CBE Management Staff to structure the online bid. Customer and
all Certified Buyers who use Supplier must agree to abide by the Rules and
Procedures set forth in the Bidder Agreement. Supplier and/or Supplier senior
staff have the right to de-certify any Certified Buyer who fails to abide by
these rules.

3.2 SITE RESOURCES. Customer will designate a room at each major
location (i.e., North American Operations Headquarters) as the Supplier Room.
This room will contain an external analog phone line and a separate external
phone line for normal telephone usage. In addition, Customer will be responsible
for providing all audiovisual equipment for projecting electronic bids for a
larger audience if Customer desires (i.e., computer projector). During a CBE and
in preparation thereof, Customer shall ensure that appropriate facilities and
personnel are available to facilitate Certified Buyers' use of the System.

3.3 PERSONNEL. Customer will designate a prime contact responsible for
all Supplier matters. This contact will have the authority to ensure that all
Customer commitments are met and will commit significant time to understanding
the Supplier process and system. Customer will also designate a "Buyer Feedback"
sponsor who will periodically attend Buyer training sessions, gather feedback on
these sessions, and assist the Supplier team in improving the training.

4. LICENSES

4.1 LICENSE. In consideration of the fees paid pursuant to this
Transaction Agreement, Supplier hereby grants, and Customer hereby accepts, a
non-exclusive, non-transferable: (i) limited license to have Certified Buyers in
North America access the System solely to conduct CBEs as set forth in this
Transaction Agreement, and (ii) limited license to have Certified Buyers in
North America use the BidWare(R) Software to work with Supplier to conduct CBEs
as set forth in this Transaction Agreement. Customer is not granted any right or
access to the Source Code and shall not, attempt to decompile, disassemble,
reverse engineer or use any other process to gain access to the Source Code.

4.2 SYSTEM. The functionality provided to Customer by the System is
described in the Documentation provided by Supplier to Customer for the System
and the BidWare(R) Software. In addition, future versions of the System will
include the functionality as set forth in Exhibit E.

4.3 AUTHORIZED USERS. Except for Certified Buyers, no other employees,
consultants, agents or other individuals of Customer or any other individuals or
entities are permitted to use the BidWare(R) Software or access the System.

5
6

4.4 NUMBER OF USERS. Customer may only use and/or install the
BidWare(R) Software on one personal computer per copy of BidWare(R) Software
distributed by Supplier under this Transaction Agreement. Customer may, however,
make one copy of the BidWare(R) Software for back-up purposes. As the System
will be resident at Supplier's facility in Pittsburgh, Pennsylvania and
maintained and operated by Supplier, Customer may not make any copies of the
System, in whole or in part, for any purpose. During the term of this
Transaction Agreement, Customer agrees that it shall only use the BidWare(R)
Software in accordance with Supplier's specifications and instructions.

5. DELIVERY AND INSTALLATION

5.1 BIDWARE(R) PCS. If Customer purchases BidWare(R) PCs from Supplier,
Supplier shall pre-load each BidWare(R) PC ordered from Supplier with one copy
of the BidWare(R) Software. Supplier will pre-test and ship each pre-loaded
BidWare(R) PC to Customer complete with modem, monitor and printer. If requested
by Customer in writing, Supplier will install the BidWare(R) PCs at Customer's
Site. Installation will be provided by Supplier's CBE Management personnel. In
the event that Customer installs the BidWare(R) PCs itself, Supplier will
provide telephone support by Technical Operations personnel. Customer shall be
deemed to have accepted a BidWare(R) PC if Customer does not report a failure of
such BidWare(R) PC during any thirty day period after its delivery. For purposes
of this Section 5.1, a "failure" means a failure caused solely by the BidWare(R)
PC which results in System unavailability.

5.2 BIDWARE(R) SOFTWARE TO QUALIFIED BUYERs. In the event that Customer
supplies its own personal computers to run the BidWare(R) Software, Customer
shall be responsible for the installation of such software onto such personal
computers. Supplier shall provide telephone support to assist Customer with the
installation of the BidWare(R) Software. All personal computers provided by
Customer to run the BidWare(R) Software must, at a minimum, conform to the
specifications set forth on Exhibit H of this Transaction Agreement. All
personal computers used during a CBE shall be located in a Supplier Room.
Customer shall also be responsible for the connection of such personal computers
to the telecommunication service used for the CBE.

5.3 BIDWARE(R) SOFTWARE TO BIDDERs. Supplier shall ship one copy of the
BidWare(R) Software to each Qualified Bidder for which Customer purchases a
BidWare(R) Software license pursuant to this Transaction Agreement. Each
Qualified Bidder shall be responsible for supplying their own personal computer
on which to load the BidWare(R) Software. Qualified Bidders shall be responsible
for loading the BidWare(R) Software on such personal computers. Supplier will
provide telephone support by Technical Operations personnel to assist Qualified
Bidders with the installation of the BidWare(R) Software.

6. FEES AND COSTS

6.1 FEES. In consideration of the Services and the licenses provided
pursuant to this Transaction Agreement, Customer agrees to pay [*****] as well
as certain [*****], depending on

6
7
need, as set forth in Exhibit D. Invoices for the fees of whatever nature,
including without limitation, license fees, BidWare(R) PC fees, training fees,
CBE management fees, Online Market Making consulting fees, Technical Operations
fees, Call Center fees and/or out-of-pocket expenses incurred during a month
will be invoiced at the end of such month. The first invoice will be sent by
Supplier to Customer by the last day of the first month after the Effective Date
of this Transaction Agreement. Monthly charges that have been in effect for less
than a full calendar month shall be prorated on the basis of a thirty (30) day
month.

6.2 CURRENCY. All fees and costs set forth in this Transaction
Agreement are stated in, and shall be paid in, the currency of the United
States.

7. MODIFICATIONS

7.1 GENERAL. During the term of this Transaction Agreement, from time
to time, Supplier will modify the BidWare(R) Software and System, including
without limitation, correcting errors in the BidWare(R) Software or System. Such
error corrections or modifications may result in the creation of a new
version(s) of the BidWare(R) Software or System, under the same or one or more
different names (collectively, the Supplier Modifications). Supplier
Modifications shall in all cases be considered new versions of existing
BidWare(R) Software and/or System and not new Products. All rights to the
Supplier Modifications shall belong to Supplier. Exhibit E to this Transaction
Agreement contains a list of modifications currently scheduled by Supplier.

7.2 AVAILABILITY. During the term of this Transaction Agreement,
Supplier shall [*****] supply Customer, and Customer shall accept, Supplier's
then current [*****] over [*****] not later than [*****].

7.3 WARRANTY. Supplier Modifications to the BidWare(R) Software shall
be considered BidWare(R) Software for purposes of this Transaction Agreement;
provided, however, that all warranty provisions herein shall apply to each
Supplier Modification from the time such modifications are first delivered to
Customer. Supplier shall promptly deliver any Documentation, if any, relating to
the Supplier Modifications.

8. TERM AND TERMINATION

8.1 TERM. This Transaction Agreement and the Agreements shall continue
in force for an initial term of twelve (12) months from the Effective Date, and
shall be automatically renewed for one twelve (12) month term thereafter, and,
if still in effect, shall again automatically renew thereafter for a term that
begins on June 8, 2000 and ends on December 31, 2000. The foregoing automatic
renewals shall occur unless Customer provides written notice of its intent not
to renew this Transaction Agreement at least [*****] days prior to the renewal
date. In the event that the term automatically renews from June 8, 2000 until
December 31, 2000, as set forth above, the [****] fee set forth on Exhibit D
shall be prorated accordingly. This Transaction Agreement and the Agreements may
be extended for additional terms past December 31, 2000 if agreed to in writing
by both Parties, upon terms and conditions mutually agreed to in writing by the
Parties. [*****].

7
8

8.2 TERMINATION. This Transaction Agreement and the Agreements may only
be terminated or canceled prior to the expiration of the term upon the terms and
conditions set forth in Sections 19.1(E), 19.3, 19.4 (except for a change in
stock ownership of less than fifty percent (50%) or pursuant to an initial
public offering under the Securities Act of 1933, as amended), 19.5 or 19.6 of
the Framework Agreement.

8.3 EFFECT OF TERMINATION. Upon the termination or expiration of this
Transaction Agreement, whether under this Article 8 or otherwise, Customer will
discontinue use of the BidWare(R) Software and access to the System, and both
parties shall return or destroy the other Party's Confidential Information as
set forth in Sections 12.9 and 12.10 of the Framework Agreement, as modified by
Sections 11.1, 11.2 and 17.3 of this Transaction Agreement.

9. OWNERSHIP

9.1 SUPPLIER INTELLECTUAL PROPERTY. Customer shall have no rights or
interests in Supplier Intellectual Property except as described in this
Transaction Agreement. All right, title and interest in and to Supplier
Intellectual Property shall be and shall remain the sole property of the
Supplier or its third party subcontractors/licensors. Supplier hereby grants to
Customer a non-exclusive, non-transferable, royalty-free license to use the
Supplier Intellectual Property as required to effectuate the purposes of this
Transaction Agreement. Customer is not granted any other right to Supplier
Intellectual Property and shall not copy, modify, create derivative works,
sublicense, transfer, sell or otherwise use or dispose of the Supplier
Intellectual Property. Notwithstanding the above, Customer may make copies of
training materials provided by Supplier solely for the internal use of Customer.

9.2 DERIVATIVE WORKS. With respect to any Derivative Works developed
under the Agreements or in the provision of the Products or Services, the
allocation of rights in such works will be as follows:

(A) All Intellectual Property rights in a Derivative Work developed
by Customer for which the preexisting work is Customer Intellectual Property,
shall be owned by Customer and shall be deemed to be Customer Intellectual
Property.

(B) All Intellectual Property rights in a Derivative Work developed
by Supplier, by Supplier in conjunction with Customer when the preexisting work
is Supplier Intellectual Property shall be owned by Supplier and shall be deemed
to be Supplier Intellectual Property.

9.3 WORK PRODUCT. All Work Product shall be owned by Supplier. Customer
shall retain no rights in any Work Product.

8
9

10. SUPPLIERS WARRANTIES

10.1 WARRANTIES. Set forth below are certain exceptions to the
covenants, representations and warranties (collectively "Warranties") set forth
in the Framework Agreement and applicable Category Agreements.

A. All Warranties shall terminate upon the termination of the
Transaction Agreement.

B. No Warranties are made with respect to Third Party Equipment,
Software and Services.

C. Section 10.11 of the Framework Agreement is modified by deleting
"necessary conversions."

D. Section 12.15 of the Software Licensing Agreement is modified by
deleting: "within the same time periods and under the terms set forth
in Article 11 of this Software Licensing Agreement."

E. Section 10.5 of the Framework Agreement and Section 12.16 of the
Software Licensing Agreement are modified by making the illicit
code/virus warranties only apply to the presence of illicit
code/viruses on the BidWare(R) Software at the time of delivery by
Supplier.

10.2 DISCLAIMER OF WARRANTIES. EXCEPT FOR THE EXPRESS WARRANTIES MADE
IN THE AGREEMENTS, AS MODIFIED BY THIS TRANSACTION AGREEMENT, NEITHER PARTY
MAKES ANY OTHER WARRANTIES, EXPRESS OR IMPLIED, CONCERNING THE SUBJECT MATTER OF
THIS TRANSACTION AGREEMENT, INCLUDING WITHOUT LIMITATION ANY IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.

10.3 REMEDY. If during the term of this Transaction Agreement, the
BidWare(R) Software fails to meet the Warranties, Supplier shall promptly repair
or replace the non-conforming BidWare(R) Software at no cost to Customer.
Supplier will not provide the foregoing warranty service if the nonconformity is
caused by malfunctions of hardware, non-Supplier software, modification of the
BidWare(R) Software not made by Supplier, by operator error, or by use of the
BidWare(R) Software that is not in accordance with the operating instructions
for the BidWare(R) Software.

11. CONFIDENTIALITY

11.1 CONFIDENTIAL INFORMATION OF SUPPLIER. Section 12.2 of the
Framework Agreement shall apply to this Transaction Agreement. However, Customer
agrees that: (i) the BidWare(R) Software, (ii) all training materials and
Documentation which are marked as "Confidential" and provided by Supplier to
Customer, and (iii) all pricing, cost information, business affairs information
and other information related to Supplier's business learned during [*****];
shall be considered Supplier Confidential Information without the approval of
the Customer Project Manager and that Supplier will not generate a written
report describing such material.

11.2 USE AND RETURN OF SUPPLIER CONFIDENTIAL INFORMATION. Section 12.10
of the Framework Agreement shall apply to this Transaction Agreement. However,
Section 12.10 is modified by deleting: ", to the extent Customer no longer needs
the Supplier Confidential Information to exercise its rights under the
Agreements" from Section 12.10(i), and deleting all of Section 12.10(iii) and
the sentence which follows 12.10(iii).

11.3 AGREEMENT. Both parties shall have the right to disclose the
existence of this Transaction Agreement but not the terms of this Agreement
unless such disclosure is approved in writing by both parties prior to such
disclosure or such terms are required to be disclosed by governmental
authorities.

12. LIMITATION OF LIABILITY.

IN NO EVENT SHALL EITHER PARTY BE LIABLE FOR CONSEQUENTIAL, INCIDENTAL OR
PUNITIVE LOSSES, DAMAGES OR EXPENSES (INCLUDING LOSS OF PROFITS, SAVINGS,
PENALTIES, FINES, LATE-PAYMENT CHARGES, INTEREST, COMPETITIVE ADVANTAGE,
GOODWILL, BUSINESS ADVANTAGE, GOODWILL, BUSINESS INTERRUPTION OR INDEMNITY
HEREUNDER), EVEN IF IT HAS BEEN ADVISED OF THE POSSIBLE EXISTENCE THEREOF.

EITHER PARTY'S LIABILITY FOR DAMAGES OF ANY KIND ARISING OUT OF THIS TRANSACTION
AGREEMENT AND THE AGREEMENTS, INCLUDING WITHOUT LIMITATION ANY AMOUNTS DUE
PURSUANT TO ARTICLE 15 OF THE FRAMEWORK AGREEMENT, SHALL BE LIMITED TO $[*].
NOTWITHSTANDING THE LIMITATION OF LIABILITY SET FORTH IN THE PRECEDING SENTENCE,
SUPPLIER'S LIABILITY FOR DAMAGES OF ANY KIND ARISING OUT OF SECTIONS 15.2(A),
AND 15.2(B) OF THE FRAMEWORK AGREEMENT (INFRINGEMENT), AND CUSTOMER'S LIABILITY
FOR DAMAGES OF ANY KIND ARISING OUT OF SECTIONS 15.1(A) AND 15.1(B) OF THE
FRAMEWORK AGREEMENT (INFRINGEMENT), SHALL BE LIMITED TO $[*]. THE FOREGOING
LIMITATIONS ON LIABILITY SHALL NOT APPLY TO FEES WHICH ARE OUTSTANDING UNDER
THIS TRANSACTION AGREEMENT.

10
11

13. CONTRACT ADMINISTRATION

13.1 DESIGNATION OF CONTRACT AND PROJECT MANAGERS. For purposes of
Article 3 of the Framework Agreement, a Party may assign the same individual to
be the Corporate Contract Manager and Project Manager. The Corporate Contract
Manager/Project Manager for the Parties shall be as follows:

Corporate Contract Manager:

Customer: Xxxxx Xxxxxx

Supplier: Xxxx Xxxxxx

Project Manager:

Customer: Xxxxx Xxxxxxxx

Supplier: Xxxxxx Xxxxxxx

A Party may change its Corporate Contract Manager and/or Project
Manager at any time in their sole discretion and shall provide notice of such
change to the other Party within ten (10) business days of such change.

14. PERSONNEL

14.1 GENERAL. Each party shall choose personnel in their sole
discretion to perform their respective services and obligations under this
Transaction Agreement. In the event that a Party is not satisfied with the
performance, actions or inactions of an employee of the other Party, the Party
shall inform the other Party of such dissatisfaction. The other Party shall then
take commercially reasonable action to investigate the performance, inaction or
action of such employee and shall take appropriate measures, if any, as
determined by such other Party.

14.2 [*****]. Supplier agrees that in the event that Customer [*****]
that includes [*****] required for Customer's performance under this Transaction
Agreement, such [*****] may [*****] provided that: (i) all [*****] by the
[*****] shall be provided by [*****], (ii) the [*****] has [*****], and (iii)
the [*****] is not a competitor of Supplier in [*****].

15. SUPPLIER SERVICES

Supplier agrees that for a period lasting from the Effective Date to
the earlier of: (i) June 30, 2000, or (ii) the date this Transaction Agreement
terminates; as long as Customer is not in default under the terms of this
Transaction Agreement, Supplier shall not provide the services provided to
Customer hereunder to the automobile operations of the following
manufacturers:[*****].

11
12

16. INSURANCE

16.1 LIMITS. The minimum limits of liability of insurance which
Supplier must maintain, as set forth in Section 17.1 of the Framework Agreement,
are modified as follows:

(i) The limits of liability for the insurance set forth in Section
17.1(B) (General Commercial) shall be [*****] per occurrence.

(ii) The limits of liability for the insurance set forth in Section
17.1(C) (Automobile) shall be [*****] per occurrence.

(iii) The limit for the insurance set forth in Section 17.1(D)
(Errors and Omissions) shall be [*****] per occurrence.

16.2 LOSS PAYEES. Supplier is not required to name any other entity,
including without limitation, Customer, as a loss payee under any of Supplier's
insurance policies.

17. GENERAL

17.1 INTERNATIONAL USE. As set forth in Exhibit F, Supplier and
Customer may agree to begin a pilot international program upon the execution by
both Parties of a separate mutually agreeable Transaction Agreement relating to
such project.

17.2 FORCE MAJEURE. The Force Majeure provision set forth in Section
25.3 of the Framework Agreement shall apply to this Transaction Agreement,
provided that the second and third sentences of such section shall not apply to
this Transaction Agreement.

17.3 ORDER OF PRECEDENCE. This Transaction Agreement incorporates the
terms of the Framework Agreement, the Software Licensing Agreement and the
Consulting Agreement. The Parties agree that any inconsistency, ambiguity or
conflict between or among the terms and conditions of this Transaction Agreement
and the Agreements be resolved according to the order of precedence set forth in
Section 1.3 of the Framework Agreement. In furtherance of, and not in limitation
to the generality of the preceding, the following provisions shall not apply to
this Transaction Agreement:

(A) Framework Agreement: Sections 1.2, 1.4, 1.5, 1.6, 1.7, 2.6, 4.1,
4.2, 4.3, 5.2, 5.6(C), 5.8(A)(3), 8.1(A), 8.3, 9.4, 9.8, 10.7 and 10.13, Article
11, Sections 12.13, 12.17, 13.2, 13.3(B) (iii), 13.3(C), 13.4, 13.5, 13.6, 13.7
and 13.9, Article 14, Sections 15.7, 19.1(A) - (D), 19.7, 19.9, 20.3, and
22.6(A) (source code), Article 23, and Section 25.17.

(B) Software Licensing Agreement: Sections 3.3, 3.4, 3.5, 4.1, 4.3,
5.1, that portion of Section 6.1(A) which states ", from which Customer may make
copies for its use consistent with all limitations of this Software Licensing
Agreement and the applicable Transaction Agreement," Sections 6.2, 7.3, Articles
8 and 9, Sections 10.1(B) (CD-ROMs), 12.4, 12.9, 12.10 and 12.14, and Articles
11, 13 and 14.

12
13

In addition, the Parties agree that any inconsistency, ambiguity or
conflict between the definitions attached to this Transaction Agreement in
Exhibit A and any other definitions contained in the Agreements or elsewhere
will be resolved in favor of the definitions attached to this Transaction
Agreement in Exhibit A.

17.4 ASSIGNMENT. Neither party may assign any of its rights or
obligations hereunder or the Agreements without the prior written consent of the
other party, which consent shall be in the other Party's sole discretion.

17.5 [*****]. Subsections 5.6(A) and (B) of the Framework Agreement
shall apply to this Transaction Agreement. Notwithstanding anything to the
contrary in the foregoing: (i) Customer shall conduct, or have conducted on its
behalf, no more than [*****] per year period after the initial one-year period,
(ii) Supplier shall only be required to provide such information in such [*****]
which is reasonably required by Customer, and (iii) the [*****] shall execute a
non-disclosure agreement substantially in the form set forth in Exhibit I prior
to its conduct of such assessment. Changes to the non-disclosure agreement may
only be made with the written consent of Supplier.

17.6 ENTIRE AGREEMENT. Section 25.14 of the Framework Agreement shall
apply to this Transaction Agreement. Additionally, the Parties agree that
Section 14(c) of the purchase order TCS26983, dated October 31, 1997, and
Section 4 of Attachment 1 thereto, shall be superseded in their entirety by
Sections 4 and 9 of this Transaction Agreement, and that Section 12 of this
Transaction Agreement shall apply to such purchase order, except that the
references therein to Sections 15.2 (A) and (B) of the Framework Agreement shall
be deemed to refer to Sections 14(a) and (b) of such purchase order. The Parties
also agree that such purchase order shall not apply to any goods or services
provided under this Transaction Agreement or any future Transaction Agreement
between the Parties.

17.7 PUBLICITY. Section 25.15 of the Framework Agreement shall apply to
this Transaction Agreement. Notwithstanding anything to the contrary in the
foregoing, Supplier may use Customer's name as part of a general customer list
used by Supplier in promotional material and business presentations.

17.8 GOVERNING LAW; VENUE; SERVICE OF PROCESS. This Transaction
Agreement and the Agreements are to be construed according to the laws of
Michigan, without giving effect to the principals of conflicts of laws. Any
action or proceedings by Customer against Supplier shall be brought in the
federal or state courts located in Pittsburgh, Pennsylvania, and any action
brought by Supplier against Customer shall be brought in federal or state courts
in Detroit, Michigan.

IN WITNESS WHEREOF, this Transaction Agreement has been executed by the
Parties as of the Effective Date.

13
14

SUPPLIER CUSTOMER

By: /s/ Xxxx X. Xxxxxx By: /s/ Xxxxx Xxxxxx
--------------------- ----------------------
Title: Chief Executive Officer Title: Commodity Manager

14
15

EXHIBIT A

DEFINITIONS

1. "Bidder" shall mean a supplier of goods and/or services who will
participate in a CBE to supply such goods and/or services to Customer.

2. "Bidder Agreement" shall mean the OnLine Bidder Agreement for General
Motors/FreeMarkets CBE attached hereto as Exhibit C. Such agreement may be
revised from time-to-time in Supplier's discretion.

3. "BidServer(R) Software" shall mean the server software used in conjunction
with online bidding auctions which is proprietary to Supplier.

4. "BidWare(R) Software" shall mean the software used in conjunction with
online bidding auctions which is proprietary to Supplier. The version of
BidWare(R), v 2.2 in general use as of the Effective Date supports multiple
Qualified Bidders bidding in real time, allowing each Qualified Bidder to
view the anonymous bids of all other Qualified Bidders.

5. "BidWare Manual" shall mean the user manual for the BidWare(R) Software.

6. "BidWare(R) PCs" shall mean the personal computers configured to operate
the BidWare(R) Software which may be purchased by Customer to be placed at
various Customer Sites in North America to allow viewing of CBEs, printing
of results, reports, and printing of audit reports.

7. "Buyer" shall mean an employee of Customer located in North America whose
primary function entails the procurement of materials from suppliers.

8. "CBE" shall mean a Competitive Bidding Event using the System as set forth
in this Transaction Agreement.

9. "Certified Buyer" shall mean a Buyer who, as determined by Supplier, has
successfully completed the Buyer training as set forth in Section 2.2 of
this Transaction Agreement.

10. [*]

11. "Customer" shall mean General Motors Corporation, Delphi Automotive Systems
and all 100% owned subsidiaries of General Motors Corporation.

12. "Documentation" shall mean the published documentation for the System and
BidWare(R) Software provided by Supplier to Customer.

13. "Project" shall mean the implementation of the global online bidding System
provided by Supplier to be used by Buyers in North America.

14. "Qualified Bidder" shall mean a Bidder chosen by Customer to participate in
a CBE which has executed Supplier's then standard Bidder Agreement.

15. "RFQ" shall mean a written request for quote which shall contain all
relevant information required for the CBE including, without limitation,
detailed specifications of the parts, material(s) or services, the quantity
requirements and the term of the commitment.

16. "Site" shall mean, when referring to Customer's facilities, a Customer
facility located in North America, and when referring to Supplier's
facilities, shall mean Supplier's facility located in Pittsburgh,
Pennsylvania.

17. "Source Code" shall mean the BidWare(R) Software and System (and components
thereof), expressed in a form suitable for modification by humans.

18. "Supplier" shall mean FreeMarkets OnLine, Inc.

19. [*]

20. "Supplier Room" shall mean a room designated by Customer which will contain
an external analog telephone line and a separate external telephone line
for normal telephone usage. The Supplier Rooms shall be used by Customer
for the viewing of CBEs using the BidWare(R) Software.

21. "Supplier Technical Operations Staff" shall mean personnel who run and
maintain the System, as well as provide technical support to BidWare(R)
licensees, Customer and Bidders.

22. "System" shall mean the Supplier global online bidding system provided by
Supplier. The System includes BidServer(R) Software installed on Supplier's
secure hardware in its Pittsburgh offices, and hardware located at
Supplier's Pittsburgh offices, including T1 lines, routers and servers.

EXHIBIT B

TRAINING AGENDA

ACTIVITY TIME
-------- ----
1. Principles of OnLine Market Making(TM) [*]
[*]

2. Communicating with Suppliers [*]
[*]

3. Structuring OnLine Competitive [*]
Bidding Events (CBEs)
[*]

4. Using BidWare(R) for Buyers and the [*]
FreeMarkets(TM) System

5. Structuring and executing a mock CBE [*]

TOTAL TIME [*]

EXHIBIT C

[*]

EXHIBIT D

-------------------------------------------------------------------------------------------------------------------------------
FEE ELEMENT DESCRIPTION RATE NOTES
-------------------------------------------------------------------------------------------------------------------------------

System Access License Unlimited North American use of [*] o To be used by any Certified Buyers in
the then current System. North America using Qualified Bidders
from anywhere in the world

o Will be billed at [*]
-------------------------------------------------------------------------------------------------------------------------------
BidWare PCs PC, modem, monitor, printer at [*] [*]
select Customer buying sites,
fully configured to run BidWare(R)
Software, exclusive of license fee
for BidWare(R) Software.

-------------------------------------------------------------------------------------------------------------------------------
BidWare(R) Software License for each copy of BidWare(R) [*] for each BidWare(R) Cost covers the following:
License Software for Buyers or Suppliers. Software license shall
begin when shipped, o Software license
and shall last for the
earlier of [*] from o Packaging
date of shipment or
the termination of o Shipping
this Transaction
Agreement, regardless o Documentation
of whether such
software is being used o Establishment and maintenance
by a Buyer or of secure user I.D.s
Qualified Bidder. [*]
for BidWare(R)Software,
Customer shall notify
Supplier in writing
whether or not
Customer wishes such
BidWare(R)Software
license to be renewed
[*]. All license fees
for BidWare(R)Software
are invoiced to
Customer upon initial
shipment or renewal.
-------------------------------------------------------------------------------------------------------------------------------

Network & Telecom Global network connection fees Network access fee - o Network fees [*]
charges and telecommunications fees [*]
charged by providers o Telecom will be [*] and may
Network connect time - adjust over time
[*]
o Providers to be chosen by
Telecom - estimated [*] Supplier
-------------------------------------------------------------------------------------------------------------------------------
Direct Labor OnLine Market Making Consulting [*] o In-depth consulting to
formulate [*]

CONSULTING TOPICS:

o Structuring RFQs for [*]

o [*] competition and ease of
award

o Application of online markets
to [*]

-------------------------------------------------------------------------------------------------------------------------------
EXAMPLES OF CONSULTING:

o Presentation to Creativity Teams:
Supplier/Supplier personnel present
the goals and process of online
market making, answer questions and
help team identify projects that
would benefit from OnLine Market
Making(TM).
-------------------------------------------------------------------------------------------------------------------------------

o Assist Certified Buyers in structuring
events: Help Certified Buyers answer
strategic questions regarding specific
events: elements of total cost, bidding
scenarios, etc.

o Communications: Assist Certified Buyers
in communicating with Qualified Bidders
in difficult or unusual situations.
-------------------------------------------------------------------------------------------------------------------------------
o Structuring complex or innovative CBEs:
Help Certified buyers determine [*].
-------------------------------------------------------------------------------------------------------------------------------
Training [*] o Structured training programs for groups
of Buyers

o Time spent preparing training materials
-------------------------------------------------------------------------------------------------------------------------------
CBE Management [*] o Work with buyers [*]

o Manage the CBE scheduling with Qualified
Buyers
-------------------------------------------------------------------------------------------------------------------------------
Technical Operations [*] o Manage and maintain the System

o Troubleshoot Qualified Bidder connection
problems

o On-site and telephone installation
services and support for Customer and
Qualified Bidders
-------------------------------------------------------------------------------------------------------------------------------

-------------------------------------------------------------------------------------------------------------------------------
Call Center [*] o Train Qualified Bidders and explain CBE and
bidding process

o Provide first line support to Certified
buyers for basic BidWare(R) Software and
CBE questions
-------------------------------------------------------------------------------------------------------------------------------
All costs set forth above for As incurred o Direct billing for travel to and from
Direct Labor are exclusive of Customer locations
out-of-pocket expenses, which will
be billed separately as incurred
pursuant to the terms of this
Transaction Agreement.
-------------------------------------------------------------------------------------------------------------------------------

All fees incurred related to Products, licenses or Services provided by Supplier
under this Transaction Agreement shall be billed to, and paid by, Customer
pursuant to the standard payment terms set forth in the Agreements as modified
by this Transaction Agreement.

All costs set forth above for Direct Labor, whether to Customer or any other
party will be billed in full day increments for, in each case, an eight hour or
greater day of service dedicated to Customer. During the term of this
Transaction Agreement, Customer agrees [*] for each of the following: (i) a CBE
Management person, (ii) a Technical Operations person, and (iii) a Call Center
person. CBE Management, Technical Operations and Call Center personnel shall be
provided on a 1:1:1 ratio for any given CBE.

EXHIBIT E

FUTURE VERSIONS OF SYSTEM

Supplier's plan for future versions of the System includes the following
additional functionality:

ENHANCEMENT RELEASE DATE DESCRIPTION

[*] July 1998 [*]

[*] August 1998 [*]

[*] November 1998 [*]

Customer understands and agrees that such enhancements are not being
specifically developed for Customer, but will be released as general
enhancements to Supplier's System and may be implemented by Supplier in the
services offered to the general public or any other customer. Customer is not
paying for the enhancements set forth above and will have no ownership interest
in them or their Intellectual Property. Access to such enhancements shall be
licensed to Customer as part of the System pursuant to the license set forth in
Article 4 of this Transaction Agreement at no additional charge.

EXHIBIT F

INTERNATIONAL IMPLEMENTATION

What follows are preliminary terms for possible expansion of the relationship of
the Parties for conducting international CBEs. The terms set forth herein are
preliminary and are subject to change. If the Parties agree to expand the scope
of their relationship to include international CBEs, the actual terms and
conditions for such relationship shall be set forth in mutually agreeable
additional Transaction Agreement(s).

POSSIBLE POSSIBLE POSSIBLE
TIMING: EXPANSION: ACTIVITIES:
------- ---------- -----------

1998 Begin pilot program in Europe [*]

[*]

1999 Begin roll-out for European o Agree on a European program
implementation
[*]

Begin pilot program in o Identify further opportunities
other region(s)

2000 Roll out into o Complete agreements for other regions
other regions
[*]

DESCRIPTION OF PILOT PROGRAMS IN THE REGIONS

Supplier pilot programs in other regions will be structured similarly to North
American Operations pilot program:

o [*]

ESTIMATED INCREMENTAL COSTS FOR INTERNATIONAL IMPLEMENTATION:

Item Fee Structure
---- -------------
System Access [*]. For example, if the potential bid volume in Europe
License Fees is U.S. $2 BB, the Access Fee will be [*]

Direct Labor Because the cost of labor [*], Customer and
Supplier agree that the direct labor costs [*]. The
percentage overhead that Supplier allocates to each
position will [*].

Supplier travel During the pilot program, Customer will [*]. Once a longer-term
agreement to other regions is reached, Supplier and Customer will [*]. Customer
will [*].

EXHIBIT G

BIDWARE(R) SOFTWARE LICENSE AGREEMENT

READ THE TERMS AND CONDITIONS OF THIS LICENSE AGREEMENT CAREFULLY BEFORE
SELECTING THE "YES" BUTTON BELOW TO ACCEPT THE TERMS OF THE AGREEMENT. THIS
SOFTWARE IS COPYRIGHTED AND LICENSED (NOT SOLD). BY SELECTING THE "YES" BUTTON,
YOU ARE ACCEPTING AND AGREEING TO THE TERMS OF THIS AGREEMENT. IF YOU ARE NOT
WILLING TO BE BOUND BY THE TERMS OF THIS AGREEMENT, YOU SHOULD SELECT THE "NO"
BUTTON DECLINING THE TERMS, UNINSTALL THE SOFTWARE FROM YOUR PC, PROMPTLY RETURN
THE PACKAGE AND YOU WILL RECEIVE A REFUND OF ANY MONEY IF YOU PAID FOR THE
SOFTWARE. THIS AGREEMENT REPRESENTS THE ENTIRE AGREEMENT CONCERNING THE SOFTWARE
BETWEEN YOU AND FREEMARKETS ONLINE, INC. ("LICENSOR" OR "THE COMPANY"), AND IT
SUPERSEDES ANY PRIOR PROPOSAL, REPRESENTATION, OR UNDERSTANDING BETWEEN THE
PARTIES.

1. GRANT OF LICENSE. Subject to the terms and conditions set forth in this
BidWare(R) Software License Agreement ("License Agreement"), we hereby grant to
you a non-transferrable and non-exclusive license (the "License") to use this
BidWare(R) Software or any of its components (collectively "the Software"). The
License granted herein authorizes use of the Software only by your authorized
users and only in connection with the services to be provided to you by
Licensor, for purposes of this License, your "use" of the Software, means to
load the Software into RAM or to store the Software in a memory storage device
such as a hard drive, CD-ROM other storage device. Under no circumstances shall
you make the Software available, or allow the Software to be made available, on
a network or file server other than the Licensor's BidWare(R) and the Licensor's
Network. Under no circumstances shall you copy the Software, or allow the
Software to be copied, for any purpose other than to produce the single archival
(backup) copy permitted under this License, nor shall you decompile or reverse
engineer the Software, or allow others to decompile, disassemble, or reverse
engineer the Software.

2. USE AND LOCATION.

2.1 The Software shall not be used to connect with any server, on-line
service, or any other system except as specifically provided by Licensor.

2.2 BidWare(R) users who have complied with the terms of this License
will be assigned a user ID and password to govern access to the Licensor's
Network and BidWare(R) databases. We reserve the right to change or cancel or
render inoperable any user ID and/or password at any time without prior
notification. You are required at all times to maintain security for your
assigned user IDs and password(s). Discloser of user IDs and passwords to anyone
else is strictly prohibited, and will be grounds for termination of our services
under this License.

2.3 You understand that we may, from time-to-time, make available
upgrades to modify the performance of the Software. You understand that in order
to utilize the Software in conjunction with the BidWare(R) and the Licensor's
Network, we may require you to perform the necessary tasks, and supply the
necessary computer equipment, to install software upgrades. Your failure to
install upgrades or provide appropriate computer equipment may render the
Software inoperable for its intended purpose.

3. WARRANTY DISCLAIMER/LIMITATION OF LIABILITY

THE COMPANY MAKES NO WARRANTIES TO THE LICENSEE, EXPRESS OR IMPLIED,
INCLUDING BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE, RESPECTING THE SOFTWARE, NETWORK, ANY COMPETITIVE
BIDDING EVENT, ANY SUPPLIER, OR THE LICENSEE'S PARTICIPATION IN ANY COMPETITIVE
BIDDING EVENT. THE LICENSEE HEREBY ACKNOWLEDGES AND AGREES THAT THE SOFTWARE AND
THE NETWORK ARE NEW CREATIONS, AND THAT THERE MAY SURFACE FROM TIME-TO-TIME
"BUGS" OR "GLITCHES"

THAT MAY AFFECT THE COMPANY'S PERFORMANCE OF ITS OBLIGATIONS, AND/OR THE RIGHTS
AND BENEFITS OF THE LICENSEE, UNDER THIS AGREEMENT. THE LICENSEE AGREES THAT IT
ASSUMES THE RISKS OF SUCH "BUGS" OR "GLITCHES".

THE COMPANY'S SOLE OBLIGATION AND LIABILITY UNDER THIS LICENSE SHALL BE
TO REMEDY ANY NON-CONFORMANCE TO THE SOFTWARE OR REPLACE THE SOFTWARE. THE
REMEDY OF THE LICENSEE SET FORTH ABOVE IS EXCLUSIVE AND IN LIEU OF ALL OTHERS.
THE COMPANY'S PARTICIPATION IN THE PREPARATION, EXECUTION, AND FOLLOW-UP OF A
COMPETITIVE BIDDING EVENT NOTWITHSTANDING, THE COMPANY SHALL NOT BE LIABLE FOR
DAMAGES THAT MAY ARISE OUT OF THE LICENSEES'S USE OF OR INABILITY TO USE
SOFTWARE, PARTICIPATION OR INABILITY TO PARTICIPATE IN A COMPETITIVE BIDDING
EVENT OR DAMAGES THAT ARISE FROM BREACH OF PERFORMANCE ON THE PART OF A SUPPLIER
OR THE LICENSEE IN FULFILLING TERMS OF A CONTRACT. THE COMPANY SHALL NOT BE
LIABLE FOR LOSS OF USE, INCOME OR PROFIT, INCIDENTAL, SPECIAL, CONSEQUENTIAL OR
OTHER SIMILAR DAMAGES ARISING, DIRECTLY OR INDIRECTLY, OUT OF OR OCCASIONED BY
THE OPERATION, USE, INSTALLATION, REPAIR OR REPLACEMENT OF THE SOFTWARE, ANY
DELAY IN OR NON-OCCURRENCE OF ANY COMPETITIVE BIDDING EVENT AS PLANNED, OR THE
LICENSEE'S OR ANY SUPPLIER'S INABILITY TO PARTICIPATE IN A COMPETITIVE BIDDING
EVENT, WHETHER SUCH DAMAGES ARE BASED ON A CLAIM OF BREACH OF CONTRACT OR
TORTIOUS CONDUCT (INCLUDING NEGLIGENCE AND STRICT LIABILITY) OR ANY OTHER CAUSE
OF ACTION.

4. PROPRIETARY RIGHTS. This License does not convey to you any exclusive
proprietary or other rights in any Software, including, but not limited to, any
patent, copyright, trademark, service xxxx, trade secret, trade name or other
intellectual property rights, except that you will have the limited rights
expressly set forth in this License. Accordingly, you acknowledge that, except
as expressly provided for in this License, you possess no title or ownership of
any Software or any portion thereof.

5. NON-ASSIGNMENT OF USE OR LICENSE. You may not assign or otherwise transfer,
voluntarily, by operation of law or otherwise, any of your rights under this
License, without, in each instance, our prior written consent, which consent may
be withheld, delayed or conditioned in our sole discretion. Any attempted
assignment or transfer in violation of the terms of this Section 5 shall be null
and void. Any assignment will not relieve you of any of your obligations under
this License.

6. TERMINATION OF LICENSE. The License is effective upon selecting the "YES"
button, which indicates your acceptance of the terms of this License Agreement,
and shall continue until terminated. The License shall terminate immediately
upon completion of or termination of services to be provided by Licensor.
Licensor may terminate this License upon the breach by you of any of the terms
hereof and you may terminate this License by returning the Software and all
copies thereof and extracts therefrom to Licensor. Upon any termination of the
License, for whatever reason, you shall, within ten (10) days after such
termination, return to us the Software, any and all copies thereof, materials
related thereto and derivations therefrom then in your possession or under your
control.

7. U.S. GOVERNMENT RESTRICTED RIGHTS.

The Software is provided with RESTRICTED RIGHTS. Use, duplication, or
disclosure by the U.S. Government is subject to restrictions as set forth in
subparagraph (c)(1)(ii) of the Rights in Technical Data and Computer Software
clause at DFARS 242.227-7013 or subparagraphs (c)(1) and (2) of the Commercial
Computer Software Restrict Rights clause at 48 CFR 52.227-19, as applicable.
Contractor/Manufacturer is FreeMarkets OnLine, Inc., 000 Xxxxxxx Xxxxxx, Xxxxxxx
Xxxxxxxx, Xxxxx 000, Xxxxxxxxxx, Xxxxxxxxxxxx 00000, XXX.

8. GENERAL PROVISIONS. This License will be governed by and construed in
accordance with the laws of the Commonwealth of Pennsylvania, without giving
effect to its conflicts of laws provisions. In the event that any provision of
this License Agreement is held to be illegal, invalid or unenforceable under
present or future laws by any court of competent jurisdiction, then such
provision will be fully severable and this License Agreement will be construed
and enforced as if such illegal, invalid or unenforceable provision were not a
part hereof. BidWare(R) and BidServer(R) are registered trademarks of Licensor.
No right, license or interest to such trademarks are granted hereunder and you
agree that no right, license or interest shall be asserted by you with respect
to such trademarks.

EXHIBIT H

PERSONAL COMPUTER SPECIFICATIONS

The personal computers on which the BidWare(R) Software and associated equipment
will be installed shall meet the following minimum specifications:

1. Pentium 100 personal computer.

2. Microsoft Windows 95 or Windows NT version 4.0

3. 16 MB RAM

4. 28.8 kbs modem

5. 10 Megabytes of unused hard drive space

6. HP LaserJet compatible printer.

Personal computers used during a CBE must be connected to the Supplier provided
network outside of Customer's firewall and not connected to any other network.

EXHIBIT I

This Non-Disclosure Agreement ("Agreement") is entered into between
FREEMARKETS ONLINE, INC. ("Discloser") and

---------------------------------------------

("Recipient")

WITNESSETH:

In consideration of the covenants and agreements herein contained, and
intending to be legally bound hereby, Discloser and Recipient agree as follows:

1. DEFINITION

"CONFIDENTIAL INFORMATION" shall mean confidential or other proprietary
information that is disclosed by Discloser to Recipient regarding
Discloser' products and other information, including without
limitation, consulting or handbook materials, product specifications
and documentation, pricing and other financial information and other
confidential business information. Confidential Information shall not
include information which: (i) is or becomes public knowledge without
any action by, or involvement of, Recipient; (ii) is disclosed by
Recipient with the prior written approval of Discloser. Recipient may
is disclose Confidential Information pursuant to any judicial or
governmental order to the extent required by such order, provided that
Recipient gives Discloser sufficient prior notice to contest such
order.

2. RESTRICTIONS ON USE

Recipient agrees that, as a condition to the receipt of Confidential
Information from Discloser, Recipient shall: (i) not disclose, directly
or indirectly, to any third party any portion of the Confidential
Information without the prior written consent of Discloser; (ii) not
use or exploit the Confidential Information in any way except for
purpose of conducting benchmarking and/or competitive assessments for
General Motors Corporation ("GM") pursuant to the agreements entered
into by Discloser and GM (the "Purpose"); (iii) promptly return or
destroy, at Discloser's option, all materials and documentation
regarding the Confidential Information received from Discloser upon
completion of Recipient's internal review or upon request of Discloser;
(iv) take all necessary precautions to protect the confidentiality of
the Confidential Information received hereunder and exercise at least
the same degree of care in safeguarding the Confidential Information as
Recipient would with its own confidential information; and, (v)
promptly advise Discloser in writing upon learning of any unauthorized
use or disclosure of the Confidential Information.

3. OWNERSHIP

3.1 OWNERSHIP. All Confidential Information furnished to Recipient
by Discloser shall, unless otherwise specified in writing by
Discloser, remain the property of Discloser.

3.2 NO LICENSE. Except for the Purpose, Discloser does not grant
Recipient any license, by implication or otherwise, to use the
Confidential Information or any license rights in any
copyright or other intellectual property rights owned by
Discloser regarding the Confidential Information.

4. DISCLAIMER

The Confidential Information is disclosed by Discloser to Recipient
"AS-IS." Nothing contained in this Agreement or in any Confidential
Information shall constitute any express or implied warranty of any
kind, including without limitation any warranty of merchantability,
fitness for a particular purpose or noninfringement of any patent,
copyright or other third party intellectual property right.

5. MISCELLANEOUS

This Agreement shall survive for the longer of (i) five (5) years from
the Effective Date of this Agreement, or (ii) five (5) years following
the termination of all agreements between Discloser and GM. Recipient
recognizes that breach of this Agreement will cause irrevocable harm to
Discloser that is inadequately compensable in damages and that
Discloser is entitled to injunctive relief for such breach. The
invalidity or unenforceability of any provision of this Agreement shall
not affect the validity or enforceability of any other provision
hereof. No provision of this Agreement may be amended or waived without
a written agreement signed by Discloser and Recipient.

IN WITNESS WHEREOF Discloser and Recipient have entered into this
Confidentiality Agreement as of the Effective Date set forth below.

------------------------------- -----------------------------
(Discloser) (Recipient)

By:
--------------------------- -----------------------------
Name:
-------------------------
Title:
------------------------

Effective Date:
---------------

EXHIBIT J

[*]

Document Metadata

Table of Contents

BACKGROUND

Document Metadata