EXHIBIT 10.30b
TECHNICAL SERVICES AGREEMENT
40R81998
This Agreement, including all Schedules referred to herein, is made and
entered into by and between Xxxxxx Xxxxxxxxxxx, USCD (hereinafter "Unisys")
which has a place of business at Township Line and Xxxxx Xxxxxxx Xxxxx, Xxxx
Xxxx, Xxxxxxxxxxxx 00000, and Contractor identified on the cover page of this
Agreement. The parties, intending to be legally bound, hereby agree as follows:
1. TERM OF AGREEMENT
The term of this Agreement and the Effective Date on which it commences are
identified on the cover page. (THE COVER PAGE WILL LIST THE TERM AS MARCH
17, 1997 THROUGH MARCH 31, 1999.)
2. STATEMENT OF WORK
During the term of this Agreement Contractor shall perform the work
described in Schedule A (Statement of Work and Payment Schedule)
(hereinafter "Work"), in accordance with the time plan set forth in
Schedule A (Statement of Work and Payment Schedule).
Schedule A shall incorporate by reference all deliverables (including the
Synopsis) which were developed for and approved by the Australian Child
Support Agency (CSA) as the result of the Scoping Study, and which are
included in Attachment 1 of the Formation of a Contract and Official Order
under PE 68.
3. PERFORMANCE OF WORK/RISK OF LOSS
3.1 The Work shall be performed by Contractor's personnel, of which the
key members, if any, are listed on Schedule B (Contractor's Key Personnel).
Key personnel shall not be added to or removed from the Work by Contractor
without the prior written consent of Unisys, which consent shall not be
unreasonably withheld. Unisys shall have the right at any time to require
that Contractor remove personnel which Unisys no longer wants performing
the Work, if and only if Unisys and Contractor agree that the performance
of Contractor's work will not be adversely affected by such removal.
3.2 Contractor shall report to the UNISYS USCD DEPUTY PROJECT
DIRECTOR/CHILD SUPPORT SPECIALIST (Xxxx Xxxxx) on matters regarding the
Work, but shall participate in all steering, planning, and risk management
committees covering the scope of work for which Tier has involvement.
Progress meetings shall be conducted at times and places as reasonably
requested by Unisys to discuss the progress of the Work and other related
matters. Contractor shall
1
provide a written report of such progress and other matters at least forty-
eight hours prior to the date of each meeting.
3.3 Contractor shall furnish the Deliverables listed in Schedule A no
later than the date(s) specified therein.
3.4 Contractor shall bear the risk of loss, damage and destruction of all
Deliverables until received by Unisys.
4. COMPENSATION/PAYMENT/TAXES
4.1 The total compensation to Contractor for Work performed hereunder is
listed on Schedule A. Unisys shall have no obligation under any
circumstances to pay Contractor any money in excess of such amount unless
agreed to in writing by the Unisys Contract Administrator identified on the
cover page.
4.2 Tier Technologies, Inc. will deliver a system in accordance with the
Project Definition (Scoping) Study Document, "Synopsis", for the price
specified in Schedule A of this contract. Following the joint application
development (JAD) sessions described in the Project Management Plan, Tier
may revise the actual effort required to deliver the functionality and
submit a request for a change to the scope of the Project to Unisys to be
submitted to the Customer in accordance with Clause C66 of the CSA
Contract. Unisys shall be bound to negotiate subsequent pricing
adjustments accordingly and, upon agreement by the parties, to submit any
and all such change requests to CSA, with a supporting statement from the
Chief Executive Officer of TIER Technologies, Inc. Any such request for
change may be accepted by the Customer upon the First Assistant
Commissioner Child Support Agency being satisfied that the change is
reasonably required to meet the aims of the Project.
4.3 Contractor shall promptly submit invoices to the Unisys Contract
Administrator named on the cover page for each payment listed on Schedule A
as it becomes due. Each invoice shall include the Unisys purchase order
number related to this Agreement; Contractor's invoice number and date; the
deliverable covered by the invoice; and the amount billed for the
deliverables.
4.4 Unisys shall pay all invoiced amounts to Contractor within thirty (30)
days after receipt of invoice.
4.5 Amounts payable by Unisys for Contractor's performance of the Work do
not include related state and local taxes or travel and living expenses,
since these are already included in Contractor's price listed on Schedule
A.
4.6 Unisys shall pay to Contractor a `mobilization fee, the amount and
timing of such payment being set forth in Schedule A.
2
5. RELATIONSHIP OF PARTIES
In performing the Work, Contractor is acting as an independent contractor
and not as an employee, agent, or representative of Unisys. Contractor has
no authority to transact any business in the name of or on account of
Unisys or otherwise obligate Unisys in any manner.
6. RIGHTS TO WORK
6.1 Contractor hereby sells and conveys to Unisys a joint right, title and
interest in and to all Work produced by Contractor, its employees, and its
authorized subcontractors in performance of the Work for conveyance to the
client; including, but not limited to, all copyrights, patents, trade
secrets and all other proprietary rights.
6.2 Contractor hereby grants Unisys a non-exclusive, royalty-free, fully
paid-up, and irrevocable right and license to use, reproduce, modify,
adapt, translate, convey and license pre-existing Contractor work product
(including, but not limited to, Contractor copyrights, patents and trade
secrets) solely to the extent necessary for Unisys to exercise its right,
title and interest in and to the work product produced by Contractor as
part of the Work to be conveyed to Client.
6.3 Contractor hereby grants to Unisys an unlimited, unrestricted,
royalty-free, fully paid-up, and irrevocable right and license, under all
of Contractor's inventions, discoveries, patents, copyrights, trade secrets
and other proprietary rights not included in the conveyance of Section 6.1
or the license grant of Section 6.2 but incorporated or required or
necessary to use the work product produced by Contractor as part of the
Work to be conveyed to client, regardless of when such proprietary rights
were first conceived, reduced to practice or created.
6.4 Contractor agrees to deliver to Unisys all information and duly signed
documents as may be necessary or useful by Unisys to vest in Unisys, or any
designee of Unisys, the foregoing rights and/or to enforce or defend such
rights.
6.5 Marketing Rights. It is the intent of both parties to enter into a
-----------------
marketing agreement (hereinafter "Marketing Agreement") governing the
future sale or transfer of the work product developed for the Client to
child support agencies in other jurisdictions, including states in the
United States and other foreign countries. Marketing rights for the Work
shall be governed by the Marketing Agreement. The foregoing rights shall
include the full, irrevocable and exclusive right to use, reproduce,
translate, publish, sell, convey, license and otherwise dispose of
Contractor work product and all portions thereof and to authorize others to
do so, subject to the conditions specified below. If Unisys desires to use
all or any portion of Contractor's work product for any potential future
sale or transfer to any other party not covered by this contract during the
term of Marketing Agreement, Contractor shall be given the first right of
refusal to
3
provide application development services on the potential engagement.
Nothing herein shall prevent Contractor from using its work product for any
further sale or transfer to any other party not covered by this agreement.
The nature and content of the work product produced by Contractor hereunder
shall not be disclosed to others nor used by Contractor without the prior
written consent of Unisys, so long as Unisys continues in performance under
the Marketing Agreement.
7. PROPRIETARY INFORMATION
7.1 Proprietary Information shall include all business and technical
information relating to the Work which is furnished to Contractor by Unisys
and all other information furnished or disclosed by one party to the other
which is marked "proprietary," "confidential" or "restricted". When
concurrent identification as "proprietary" "confidential" or "restricted"
is not feasible at the time of disclosure, the disclosing party must
provide such identification within fifteen (15) days of disclosure. Each
party shall exercise the same degree of care to avoid disclosure of
"proprietary" "confidential" and "restricted" information of the other as
it affords its own similar information, but in no event less than
reasonable care.
7.2 The Work and all deliverables are deemed Proprietary Information of
Unisys as though it were Proprietary Information furnished by Unisys to
contractor, and shall be treated as such by Contractor.
7.3 Proprietary Information shall be used by the receiving party only as
necessary for the purposes of this Agreement and shall be maintained in
confidence unless the receiving party can legally prove that such
information: (i) is publicly available other than through breach of this
Agreement, (ii) has been rightfully obtained from a third party with no
obligation of confidentiality, (iii) is known or developed independently of
the disclosure by the disclosing party, (iv) was already known prior to
disclosure by the disclosing party or (v) was disclosed to a third party by
the disclosing party without imposing an obligation of confidentiality.
8. EXPORT CONTROL OF INFORMATION
Contractor shall comply with applicable United States laws and regulations
which prohibit the export of technical data that originates in the United
States or any product directly based on such data without prior written
authorization as may be required from appropriate agencies of the United
States. Such compliance obligates Contractor not to export Unisys
Proprietary Information or make it available in the United States to
aliens.
4
9. INDEMNIFICATION
9.1 Contractor agrees to indemnify and hold harmless Unisys, its licensees
and transferees against any claim based on infringement of a patent,
copyright or other proprietary right or improper use or misappropriation of
a trade secret of a third party occasioned by any use, sale, license, or
reproduction of the Work product delivered by Contractor. Upon prompt
notice to Contractor of such claim, Contractor at its own expense shall
answer, defend or settle such claim and pay any and all judgments,
including an award of attorney fees, costs, damages and expenses relating
to such claim. It is agreed that Unisys may be represented by counsel of
its own choice at its own expense in any proceeding. In the event Unisys
or any of its licensees or transferees is enjoined from using the
Contractor Work product, Contractor agrees to obtain for them the right and
license to use the Contractor Work product or to modify the Contractor Work
product to eliminate the grounds for such injunction.
9.2 Unisys agrees to indemnify and hold harmless Contractor, its licensees
and transferees against any claim based on infringement of a patent,
copyright or other proprietary right or improper use or misappropriation of
a trade secret of a third party occasioned by any use, sale, license, or
reproduction of the Work product delivered by Unisys. Upon prompt notice
to Unisys of such claim, Unisys at its own expense shall answer, defend or
settle such claim and pay any and all judgments, including an award of
attorney fees, costs, damages and expenses relating to such claim. It is
agreed that Contractor may be represented by counsel of its own choice at
its own expense in any proceeding. In the event Contractor or any of its
licensees or transferees is enjoined from using the Unisys Work product,
Unisys agrees to obtain for them the right and license to use the Unisys
Work product or to modify the Unisys Work product to eliminate the grounds
for such injunction.
10. CONTRACTOR'S WARRANTIES
Contractor makes the following warranties to Unisys:
(a) Contractor has expertise in the field covered by this Agreement and
shall commit time and resources to attain the stated goal and complete the
Work.
(b) Contractor agrees to use its best efforts to correct any errors or
defects which arise from its services performed hereunder and which are
brought to Contractor's attention within ninety (90) days of receipt of the
Work product by the Unisys UCSD Deputy Project Director/Child Support
Specialist (Xxxx Xxxxx).
(c) In performing the Work Contractor shall not infringe any trade secret,
copyright or patent of a third party.
5
(d) Contractor shall not divulge or furnish to Unisys any trade secret or
other proprietary information of any third party which Contractor does not
have the right to divulge or furnish.
(e) Contractor has the power and right to grant Unisys the title and
license rights set forth in Section 6 hereof.
(f) This Agreement is not in conflict with any other agreement or
obligation which Contractor has with any third party.
(g) All associates, employees, subcontractors and subcontractor associates
and employees who have written or created pre-existing Contractor work
product and/or who will write or create Contractor work product produced as
part of the Work were and shall be under obligation to convey to Contractor
the rights described in Sections 6.1, 6.2 and 6.3.
11. SERVICES FOR OTHERS
Contractor and its personnel assigned to perform the Work shall not engage
directly or indirectly in any undertaking which creates any legal
impediment to or conflicts with rights granted to Unisys by Contractor
under this Agreement. Contractor shall not undertake, during the term of
this Agreement, to perform similar services for any third party which would
compromise the value of the Work or Deliverables to Unisys.
12. NOTICE OF INFRINGEMENT
12.1 Contractor shall give Unisys prompt written notice of any claim by a
third party that work performed by Contractor under this Agreement
infringes or misappropriates intellectual property rights of the third
party. In the event of any such claim by a third party against Unisys
alleging infringement or misappropriation of intellectual property rights,
Contractor shall cooperate with Unisys in connection with Unisys defense
thereof. Unisys shall have the right at its expense to participate in the
defense of any suit brought against Contractor claiming infringement or
misappropriation of intellectual property rights based on or relating to
the Work.
12.2 Unisys shall give Contractor prompt written notice of any claim by a
third party that work performed by Unisys under this Agreement infringes or
misappropriates intellectual property rights of the third party. In the
event of any such claim by a third party against Contractor alleging
infringement or misappropriation of intellectual property rights, Unisys
shall cooperate with Contractor in connection with Contractor defense
thereof. Contractor shall have the right at its expense to participate in
the defense of any suit brought against Unisys claiming infringement or
misappropriation of intellectual property rights based on or relating to
the Work.
6
13. ADMINISTRATION
13.1 The Unisys USCD Deputy Project Director/Child Support Specialist
(Xxxx Xxxxx) shall be the principal interface with Contractor on Work
matters and shall have authority to clarify, explain and provide further
details regarding Unisys expectations concerning the Work, but shall have
no authority to modify any provisions of this Agreement including, without
limitation, the compensation, scope of work or any schedule therefor,
without agreement by Unisys Contract Administrator.
13.2 Unisys Contract Administrator is Unisys authorized representative for
all other matters related to this Agreement, including modifications
thereof.
7
14. NOTICES
14.1 All notices and requests given by either party to the other shall be
in writing and sent by facsimile, e-mail, telex or first class mail.
14.2 Notices and requests sent by Unisys shall be addressed to the
Contractor's Project Administrator at the address listed on the cover page
of this Agreement.
14.3 Notices and requests sent by Contractor regarding aspects of the Work
shall be addressed to the Unisys USCD Deputy Project Director/Child Support
Specialist (Xxxx Xxxxx) at the project work site.
14.4 Notices and requests sent by Contractor regarding matters other than
aspects of the Work including, without limitation, compensation and
Contractor's personnel shall be addressed to Unisys Contract Administrator
at the address listed on the cover page of this Agreement. However, the
Unisys USCD Deputy Project Director / Child Support Specialist (Xxxx Xxxxx)
shall be informed both verbally and in writing of any and all intended
substantive communications with Unisys Contract Administrator prior to the
occurrence of the communication.
14.5 Contractor and Unisys shall each have the right to change at any time
the respective individuals to whom notices and requests shall be sent by
giving written notice of such change to the other party.
15. ASSIGNMENT
Contractor shall not assign this Agreement or any rights hereunder or
delegate the Work or any of Contractor's other obligations hereunder to any
third party without prior written consent of Unisys, and any assignment
without such consent shall be void. Not withstanding anything to the
contrary, Contractor shall have the right to assign this Agreement and its
rights and duties hereunder to any successor in interest by acquisition,
merger, operation of law or otherwise. Any legal representative or
successor in interest of Contractor shall be bound by the provisions of
Section 7 of this Agreement regarding Proprietary Information. Unisys
shall have the right to assign this Agreement and its rights and duties
hereunder to any successor in interest by acquisition, merger, operation of
law or otherwise.
8
16. TERMINATION/CANCELLATION
16.1 TERMINATION FOR CONVENIENCE
Unisys shall have the right to terminate this Agreement or the Work to be
performed hereunder in whole or in part for its convenience only in the
event that Unisys is terminated for convenience. Unisys shall endeavor to
give notice of termination to Contractor no more than seven days after
receipt by Unisys from Client that Unisys' prime contract has been
terminated pursuant to clause c.71, and Contractor shall terminate the Work
as quickly as possible upon receiving notice. Unisys shall have no
liability to Contractor based on any such termination except to pay all
amounts due Contractor up to the date of termination in accordance with the
compensation provisions of Section 4. Contractor shall promptly deliver to
Unisys all Work product, whether or not completed, which is in Contractor's
possession on the termination date containing information related to the
Work, including a final report to be prepared by Contractor describing
results of the Work up to the date of termination.
16.2 CANCELLATION FOR NON-PERFORMANCE
(a) Unisys shall have the right to cancel this Agreement in the event of
any material breach by Contractor which is not in good faith dispute
between the two parties and which Contractor fails to cure within thirty
days or to produce a plan within 30 days which demonstrates capability to
correct within 60 days after written notice of breach from Unisys. Any
such notice of cancellation shall become effective, if Contractor fails to
cure the breach or to produce a corrective plan showing cure within 60
days, on the thirtieth day after transmittal of the notice as provided in
Section 13. Notice of cancellation rightfully given by Unisys for material
breach by Contractor which is not timely cured shall excuse Unisys from
paying for any Work performed by Contractor after the date of notice of
material breach given to contractor by Unisys. However, payment shall be
made for all deliverables satisfactorily completed under the terms of this
Agreement prior to any notification of cancellation for material breach.
Unisys shall have the option upon cancellation to obtain delivery and
retain title and license rights, as provided herein, in and to all Work
product completed or in preparation on the date of cancellation in exchange
for payments made and owed as of such date.
(b) Contractor shall have the right to cancel this Agreement and the rights
and licenses granted to Unisys in Section 6 only if Unisys fails to cure
any deficiency in making any payment due Contractor, which is not in good
faith dispute between the parties, within thirty days after receiving
written notice of such deficiency.
9
16.3 ADDITIONAL RIGHTS AND REMEDIES
Unisys and Contractor shall retain all rights and remedies available at law
or equity, to the extent they are not inconsistent with this Agreement, in
the event of any termination or cancellation of this Agreement.
17. PUBLICITY
Contractor shall not disclose the terms and conditions of or publish any
information concerning this Agreement without prior written consent of
Unisys.
18. WAIVERS
The failure of either party to assert any claim or right against the other
party regarding its obligations hereunder, in any one or more instances,
shall not constitute a waiver of such claim or right with respect to future
performance of such obligations and other obligations under the Agreement.
19. SEVERABILITY
The invalidity or unenforceability of any particular provision of this
Agreement shall not affect other provisions, and the Agreement shall be
construed in all respects as if such invalid or unenforceable provisions
were omitted.
20. HEADINGS
All section and paragraph headings are for reference only and shall not be
used in construing this Agreement.
21. GOVERNING LAW
This Agreement will be governed by the local laws of the Commonwealth of
Pennsylvania.
22. SURVIVAL OF PROVISIONS
The rights and duties of the parties as set forth in Sections 6, 7, 8, 12
and 17 shall survive the expiration, termination or cancellation of this
Agreement and shall inure to the benefit of and be binding and their
authorized assigns, successors and legal representatives.
23. ENTIRE AGREEMENT
This Agreement sets forth the entire agreement between the parties and
supersedes all prior oral and written agreements and understandings between
the parties with respect to the subject matter hereof. This Agreement may
not be modified or the parties released from their obligations hereunder
except by an instrument in writing signed by an authorized representative
of the parties.
10
24. COMPLIANCE WITH LAW
Contractor shall comply with all federal, state and local laws and
regulations pertaining to the performance of this Agreement and shall
indemnify Unisys for any liability and related costs, expenses and fees
incurred by Unisys as a result of Contractor's breach of such obligation.
25. BUSINESS PRACTICE GUIDELINES
Contractor acknowledges that it has received a copy of Unisys Business
Practice Guidelines and Code of Ethical Conduct (Schedule C) and has read
and will act in accordance with them.
TIER TECHNOLOGIES, Inc. XXXXXX XXXXXXXXXXX
BY: /s/ Xxxxx X. Xxxxxxx BY: /s/ X. Xxxxxxxxxxx
TITLE: its Chair & CEO TITLE: ISG Procurement
DATE: 7/27/97 DATE: 7-24-97
11
SCHEDULE A
STATEMENT OF WORK AND PAYMENT SCHEDULE
TIER Technologies, Inc. is expected to conduct a Scoping Study prior to the
actual build of the Australian Child Support Enforcement system for the Child
Support Agency (CSA). The specific goals of the study are to:
. examine the scope of the Project against the RFT (in particular Sections 1, 4
and 5, appendices D to G of the RFT) and the Contractor's response and the data
models referred to in those Sections in order to settle a firm functional
specification for the project as the Customer's Statement of Requirements to be
inserted in Section 1 of the Annex to the Official Order for the Project.
. identify a list of tasks for the Project Plan for inclusion in Section 1 of
the Annex to the Official Order for the Project.
. create a skills transfer strategy to be inserted in Section 1 of the Annex to
the Official Order for the Project.
. reconfirm the statement of the Contractor's resources required for inclusion
in Section 2 of the Annex to the Official Order for the Project.
. settle details of any software requested for the Project for inclusion in
Sections 3 and 4 of the Annex to the Official Order for the Project.
. finalize details of the cost of the Project and method of payment for
inclusion in Section 4 of the Annex to the Official Order for the Project;
. assist with project initiation activities.
Both parties hereby acknowledge as of June 26, 1997, that the scoping study as
described herein has been duly completed and accepted according to the contract.
12
WORK TO BE PERFORMED DURING THE SCOPING STUDY
As part of the Scoping Study, Tier Technologies, Inc. agrees to perform the
following tasks:
1. Confirmation of Xxxxx 0 xxx Xxxxx 0 Xxxxxxxxx (Xxxxxx 1.1)
Level 0 and level 1 processes will be confirmed and modeled.
A business context model will also be developed to describe the high level
business architecture and key future directions.
Deliverable: Document or documents identifying the Business Context Model, the
-----------
Level 0 Process Model and the Level 1 Process Model.
Due 4/11/97.
2. Identification of Strategic Data Requirements for MIS and DSS (Matrix 1.4)
Assist with identifying management information reporting and decision support
requirements, and on ensuring that processes and data are included which will
enable these requirements to be met. (The Unisys USCD Deputy Project
Director/Child Support Specialist (Xxxx Xxxxx) will take the lead on this task,
with primary responsibility for producing the deliverable.)
Deliverable: A Strategic Data Requirements Document, containing:
-----------
. data definitions (to be included in the data model)
. definition of processes required to collect the data (manual/automated).
Due 5/5/97.
3. Determine Development Approach for Part 1 (Matrix 1.5)
This task will determine the strategy for developing Part 1 in terms of the
major assumptions, priorities and dependencies for development, and the
resources required.
Deliverables: Written report identifying Approach to Part 1. Due
------------
4/21/97.
13
4. Determine Development Approach for Part 2 (Matrix 1.6)
This task will determine the strategy for developing Part 2 in terms of the
major assumptions, priorities and dependencies for development, and the
resources required.
Deliverables: Written report identifying Approach to Part 2.
------------
Due 4/29/97.
5. Develop approach to alignment with ATO (Matrix 1.7)
This task addresses a requirement for the redeveloped system to align with the
ATO where practicable. A strategy will be developed which defines the level of
alignment to be achieved, and provides guidelines for achieving it.
Deliverables: Written ATO Alignment plan, containing:
------------
. approach
. procedures
. impact statement.
Due 4/8/97.
6. Preparation of Skills Transfer Strategy (Matrix5.1)
A skills transfer strategy will be developed for ensuring that the CSA will have
the in-house skills needed to maintain and enhance the redeveloped system. The
strategy will cover both the initial selection of CSA staff, and the on-going
selections and management of staff. This will involve the following sub-tasks:
. development of selection guidelines
. confirmation of number of positions for CSA staff
. definition of skill requirements for each position
. interviewing and selection of CSA staff
. preparation of plans to ensure transfer of necessary skills
. preparation of procedures for performance appraisal
. preparation of procedures to ensure integration and co-ordination with CSA HR
and the CPSU.
This task must be given priority to enable training to be carried out in time
for the start of the main project.
14
Deliverable: Skills Transfer Strategy Document, containing:
-----------
. selection guidelines
. position descriptions and skill requirements
. results of interview and selection process
. skills transfer plans for each individual
. on-going procedures for maintaining skill levels throughout the project
. CSA/CPSU HR integration procedures
Due 5/6/97.
7. Preparation of Data Model (Matrix 2.1)
An agreed data model will be developed, to the level of entity types and
relationships, for the purpose of scoping and defining the functionality of the
new application to be developed. Definition of properties and attributes will
occur during the main project. This task will include:
. examination of CSA logical model and confirmation of intention to use S.
Carolina
. importation of S. Carolina model into Composer
. comparison of S. Carolina model with CSA logical model (workshop)
. development of the new data model
. functional review of new data model
. sign-off of new model
The process models produced in Task 1 above (Matrix 1.1) will be cross-
referenced to the data model to produce a matrix showing which processes will
create, read, update or delete each data entity (known as a CRUD matrix).
Deliverables: Logical Data Model/Entity Relationship Diagram.
------------
Due 4/28/97.
CRUD Matrix
Due 5/5/97.
8. Assist in the Development of a Data Conversion Strategy (Matrix 2.3)
A strategy will be developed for converting the cleansed data from the current
database format to the new database format. The output from this task will
enable data conversion to be scheduled into the Project Management Plan. Tier
Technologies, Inc. will assist in this process. (The Conversion Manager for the
project will be expected to take the lead on this task and will be responsible
for production of the deliverable.)
Deliverable: Preparation of appropriate components of the Data Conversion
-----------
Strategy Document, which will contain:
. approach
.
15
. resources
. schedule
. contingency planning.
Due 4/15/97.
9. Assist in the Identification of Key Performance Indicators for the Project
(Matrix 4.3)
A set of key performance indicators (KPIs) for the Project will be defined.
Progress against the KPIs will be monitored on a regular basis to determine the
overall health of the Project. The project principal and the project manager
will take the lead on this task and have responsibility for creating the
deliverable.)
Deliverable: Attendance at meetings to determine key performance indicators.
-----------
Due 4/3/97.
10. Develop Project Management Plan (Matrix 4.4)
A Project Management Plan (PMP) will be prepared.
The PMP will include the following:
. tasks, resources, schedules, deliverables
. issues management and escalation procedures
. change control mechanisms
. reporting procedures
. Quality Management Plan
. Configuration Management Plan
. Subcontractor Mgmt Plan
. Standards Document
. Testing Strategy
. Implementation Strategy
. Support Strategy
. Risk Management Plan
Key deliverables for this task are:
. Change Control Mechanisms
. Quality Management Plan (QMP)
. Implementation Strategy and Plan
. Risk Management Plan
Deliverable: Preparation of the following plan components:
-----------
. tasks, resources, schedules and deliverables related to application
development
.
16
. standards document
. assist in development of a testing strategy.
Due 5/14/97.
11. Prepare Statement of Price and Payment Schedules (Matrix 4.5)
A statement of the price and payment schedules will be prepared for inclusion in
Section 4 of the Annex to the Official Order for the Project.
Deliverable: Statement of price and payment schedules, in CSA approved
-----------
formats, related to all components of the project to be performed by Tier
Technologies, Inc.
Due 5/14/97.
12. Define Operational Performance Indicators (Matrix 3.1)
CSA and Unisys must agree on operational performance indicators and targets for
phase deliverables. The indicators will be:
. availability of on-line applications
. host response time, for transactions against the application server
. completion of batch processes within the available window
. timely production, viewing, archiving, retrieval and printing of letters
. improved productivity in system enhancement and maintenance
. bulk annual processing completion time
. capacity (e.g. MIPS, disk).
Tier Technologies, Inc. will assist in this process. (The project principal
will be responsible for performance of this task and preparation of related
customer deliverables.)
Deliverable: Attendance at meetings during which indicators will be defined and
-----------
review and revision of the written statement of operational performance targets
which will be submitted to CSA as a deliverable.
Due 4/4/97.
13. Identify Technical Architecture and Constraints (Matrix 3.2)
Unisys' proposal contains a recommendation on the preferred platform for
Composer development (p87 of the Response). The technical environment in which
development is to occur, and any resulting constraints, must be identified and
documented. by Tier Technologies, Inc.
The architecture will include requirements for management information reporting
and decision support.
17
Deliverable: Written statement of Technical Architecture & Constraints to
-----------
support the complete project development, execution and operating environment.
Due 4/25/97.
18
WORK TO BE PERFORMED AFTER THE SCOPING STUDY
During Parts 1 and 2 of the project, which will commence after the Scoping Study
concludes, TIER Technologies, Inc. will be expected to design and develop a
Child Support Enforcement system which meets CSA's defined requirements, as set
forth in the Synopsis incorporated by references in the Formation of a Contract
and Official order Under PE 68. The tasks to be performed by TIER Technologies,
Inc. during Parts 1 and 2 of the project will be taken from the Project Plans
developed during the Scoping Study and will be included in a subsequent addendum
to this agreement.
19
SUBSEQUENT ADDENDUM # 1: REVISED STATEMENT OF WORK FOR PARTS 1 AND 2 OF THE
PROJECT
Definition:
-----------
The terms "Scoping Study" and "Project Definition Study" are used
interchangeably, without any difference in meaning.
GENERAL PROVISIONS:
1. THE YEAR 2000
Notwithstanding anything to the contrary contained herein or in the
output from the Project Definition Study or in Unisys' original tender, it
is understood and agreed by the Contractor and Unisys that, while any
software supplied by the Contractor will be Year 2000 Compliant (as defined
below), the Contractor will not be responsible for any third party software
that is not Year 2000 Compliant, or for any information received by or in
the Child Support system which is not Year 2000 Compliant. Without
limiting the foregoing, if any information received by or on the Child
Support System, by whatever means, is not year 2000 Compliant, Unisys
acknowledges that the Contractor shall not be responsible for such failure
is caused in any way by such non-compliant information. For the purposes
of this provision, 'Year 2000 Compliant' means hardware or software which:
(a) will handle date information before, during and after 1 January 2000
including but not limited to accepting date input, providing date
output and performing calculations on dates or portions of date;
(b) will function accurately and without interruption before, during and
after 1 January 2000 without any change in operations associated
with the event of the new century;
(c) will respond to two digit and cure date input in a way that resolves
the ambiguity as to the century in a disclosed, defined and
predetermined manner, and will store and provide output of date
information in ways that are unambiguous as to the century.
2. LOCATION OF THE SITE
The Child Support System will be developed at the ATO Offices in Canberra. The
System may be used from all offices of the CSA.
20
3. DESIGNATED OPERATING ENVIRONMENT
The current system uses 100 MIPS of processing capacity and 80 gigabytes
of disc storage. The CSA is expecting a growth rate of 10-15% per year
over the next 5 to 6 years (see the detailed Specifications in the RFT).
It is essential that the final capacity required by the redeveloped Child
Support Computer System will not be greater than that of the current
system plus expected growth. The Contractor agrees it will make all
reasonable efforts to contain the systems to be developed within the
constraints stated. In the event that this proves impossible the
Contractor will discuss and agree with Unisys and CSA ways in which the
scope or system structure could be varied to enable the contract to be
met. Where the execution of such a variation which is agreed to by CSA
would lead to additional costs to Unisys and/or the Contractor then the
contract change control procedures will apply.
4. PREPARATION OF INVOICES BY CONTRACTOR
With the exception of the initial mobilization fee, an invoice may only
be presented after a part of the Project required to complete a
deliverable has been accepted by CSA or CSA is required to make some
payment that is not dependent upon acceptance.
5. DOCUMENTATION
(i) As part of the Child Support System the Contractor will develop:
. a set of technical Documentation to facilitate the future development
and maintenance of the Child Support System by a technically competent
third party
(ii) Documentation will be produced in a way that facilitates:
. it being made available electronically and in hard copy; and
. it being updated easily to take account of changes:
- in management and procedures within the Child Support Agency, and
- to the software.
(iii) Documentation will be accepted as part of each deliverable of the Project
where applicable.
6. TRAINING AND SKILLS TRANSFER
The Contractor will make every reasonable effort to ensure that at the
conclusion of the Project there will be an in house skills capacity,
within the CSA organization sufficient to maintain and enhance the system
as developed during
21
the Project. This capacity will be developed in consultation between
Unisys and CSA based upon the principles set out in Deliverable 5.1 (Skills
Transfer Strategy).
Unisys may, at the request of the Contractor and following agreement by the
CSA, assign personnel to work with and for the Contractor. These personnel
will be sought and selected according to the processes described and
defined in Deliverable 5.1 of the Project Definition Study.
A strategy will be developed as part of the Project to train CSA staff so
that they may make best use of the System developed during the Project (See
Deliverable 5.3 Training Strategy).
7. WARRANTY PERIOD
The Contractor will provide warranty services for the Child Support System
for a period of 3 months from the acceptance of the last part of the
System.
8. SERVICE PERFORMANCE FACTORS
The following material will be used to measure performance during the
Warranty Period from the completion of Part 1.
(a) The system as a whole will be developed in components: the components
will collectively comprise the system. Components will be either:
(i) business critical: business critical components are those
components which prevent the Customer from carrying on their core
business; or
(ii) business non-critical: business non-critical components are
components which are not business critical.
(b) CSA will maintain their own help desk and will prioritise problems
prior to requesting service from the Contractor.
(c) Contractor problem-resolution staff will be dedicated to CSA.
(d) Problems with components will be classified as follows:
22
Fatal Entire application component is inoperable by all users
meaning that the business processes supported by that
component cannot be carried out
------------------------------------------------------------------------------------------------
Severe The application component has limited operability and
there is negative impact on the business processes
supported by that component
------------------------------------------------------------------------------------------------
Minor The application component does not operate to agreed
specification although business processes supported by
the component are not significantly affected.
------------------------------------------------------------------------------------------------
(e) The classification of a given problem will be agreed between Unisys
and the Contractor. The Contractor will have responsibility only for
those factors affecting the problem which the Contractor has
developed. Following agreement of the classification the following
process will be adopted for resolution:
(i) the problem will be fixed as soon as is practicable;
(ii) if the problem will not be fixed immediately then, wherever
possible, a work-around will be defined or developed as soon as
is practicable.
(f) In any event the Contractor will fix the problem in a resource
effective manner, where resources includes time, the use of CSA
computer time and the involvement of CSA staff and users.
9. REBATE AMOUNT
In the event that the Contractor does not during the warranty period
commence the rectification of a problem for which it is responsible within
a timely manner, then Unisys shall be entitled to engage a third party to
rectify the problem, and Unisys shall be given a rebate equal to the
reasonable costs incurred of having to engage a third party to rectify the
problem. The severity of the problem may also be taken into account in any
calculation involving warranty work, but no such amount will be payable
where the Contractor rectifies the problem in a timely manner.
10. PRIVACY
All staff of the Contractor required to perform duties on CSA's premises
are required to complete a Commonwealth Security declaration form and a
Privacy Deed.
23
Access to the CSA's premises including the Site is controlled by the CSA
Security. Contractors passes will be issued for individual staff members
on completion of the CSA security checks.
11. SPECIAL LEGISLATION
The Contractor shall make their staff involved in the Project aware of the
terms of the secrecy provisions in Section 16 of the Child Support Act and
Income Tax Assessment Act; and obtain from them a secrecy declaration in
the appropriate format. The Contractor understands that other agencies
such as the Department of Social Security have similar secrecy
requirements. If the Contractor's staff are likely to have access to that
type of material the Contractor undertakes to inform persons of the
relevant requirements.
12. LIABILITY
The Contractor's Liability is limited to 2 times the Contractor's share of
the total CSA Contract value.
13. ACQUISITION OF HARDWARE AND SOFTWARE
The Contractor does not need to acquire any software or hardware for the
purposes of this Project.
Specific Provisions:
--------------------
During the term of this Agreement Contractor shall build, test, warranty and
participate in the acceptance and piloting of a Child Support System in
accordance with CSA's requirements as set forth in the Synopsis included by
reference as part of Attachment 1 to the Official Order. At a minimum, the
Contractor will perform the development tasks identified in the project
management plan included by reference as Deliverable 4.4 in the Official Order,
in accordance with the associated timeframes.
Deliverables:
-------------
As the result of the performance of the development tasks identified in the
project management plan included by reference as Deliverable 4.4 in the Official
Order, the Contractor will provide the deliverables identified in Schedule D,
which - after acceptance by CSA- will constitute the basis for monthly payment
in accordance with the payment schedule included herein.
DUE DATES FOR DELIVERABLES
All deliverables identified in this agreement will be due in accordance with the
CSA approved project plans related to various project phases (Scoping Study,
Part 1 and
24
Part 2). All project plans will be jointly developed by TIER Technologies, Inc.
and Unisys and approved by CSA.
All deliverables will be submitted to Unisys USD prior to submittal to CSA.
PAYMENT TERMS
All work associated with the Scoping Study will be satisfactorily performed byt
TIER Technologies, Inc. for a firm fixed price of $90,000. All work performed
by TIER Technologies, Inc. subsequent to the Scoping Study will be
satisfactorily performed by TIER Technologies, Inc. for a firm and fixed price
of $5,259,020, based on the proposal submitted to CSA on 12/12/96 and the
Synopsis incorporated by reference in Attachment 1 of the Formation of a
Contract and Official Order Under PE 68. The entire firm fixed price of
$5,349,020. covers the Scoping Study, the redevelopment of the Registration and
Assessment modules (included in Part 1 of the project), the redevelopment of the
Accounting module (included in Part 1 of the project), and redevelopment of
other additional features (Part 2 of the project).
Following the joint application development (JAD) sessions described in the
Project Management Plan, Tier may revise the actual effort required to deliver
the functionality and submit a request for a change to the scope of the Project
to Unisys to be submitted to the Customer in accordance with Clause C66 of the
CSA Contract. Unisys shall be bound to negotiate subsequent pricing adjustments
accordingly and, upon agreement by the parties, submit any and all such change
requests to CSA, with a supporting statement from the Chief Executive Officer of
TIER Technologies, Inc. Any such request for change may be accepted by the
Customer upon the First Assistant Commissioner Child Support Agency being
satisfied that the change is reasonably required to meet the aims of the
Project.
If the scope of work changes and TIER Technologies, Inc. services - in addition
to or less than those originally proposed to CSA - are required, TIER
Technologies, Inc. agrees to provide those service at a firm fixed price to be
negotiated with Unisys USD and included as a subsequent addendum to this
agreement.
All travel expenses to and from the primary project location (Canberra, ACT)
incurred by any and all TIER Technologies, Inc. employees in conjunction with
this project are included in the firm fixed prices identified above. Any
project related travel from Canberra to any other location within or outside of
Australia, for key personnel identified in Schedule B, shall be reimbursed by
CSA at the rate applicable to non SES officers in the Australian Public Service,
in accordance with the Official Order. In the event that non-key Tier personnel
are requested to perform project related travel from Canberra to any other
location within or outside of Australia, Tier shall not be obligated to comply
with such request unless directly reimbursed by CSA at the rate applicable to
non SES officers in the Australian Public Service.
25
Payments will be made to TIER Technologies, Inc. as provided in the payment
schedule set forth directly below, contingent upon project deliverables being
accepted by CSA in accordance with Section 4 of this addendum. TIER
Technologies, Inc. will submit all invoices to Unisys USD, through the USCD
Deputy Project Director/Child Support Specialist (Xxxx Xxxxx), for payment.
TOTAL CONTRACT PRICE $5,349,020.00
Scoping Study $ 90,000.00
Payment Schedule $5,259,020.00
Mobilization upon signing $262,951.00
June 30, 1997 $262,951.00
July 31, 1997 $262,951.00
August 31, 1997 $262,951.00
September 30, 1997 $262,951.00
October 31, 1997 $262,951.00
November 30, 1997 $262,951.00
December 31, 1997 $262,951.00
January 31, 1998 $262,951.00
February 28, 1998 $262,951.00
March 31, 1998 $262,951.00
April 30, 1998 $262,951.00
May 31, 1998 $262,951.00
June 30, 1998 $262,951.00
July 31, 1998 $262,951.00
August 31, 1998 $262,951.00
September 30, 1998 $262,951.00
October 31, 1998 $262,951.00
November 30, 1998 $262,951.00
Final Payment upon $262,951.00
Conclusion of Warranty Period
FLOW DOWN OF TERMS AND CONDITIONS
TIER Technologies, Inc. agrees to be subject to all terms and conditions
contained in the prime contracts with CSA (PE 68 and subsequent Official Order
for the Project) for this project, so long as Tier Technologies has had an
opportunity to participate in, negotiate, and affirmatively assent with Unisys
to all material issues expressly including but not limited to the question of
limiting liability under PE68 and the subsequent Official order for the project.
SCHEDULE B
CONTRACTOR'S KEY PERSONNEL
26
TIER Technologies, Inc. agrees to make the individuals listed below available to
the project, for the duration of the project, at the specified utilization
rates. Personnel and personnel percentage of time allocations to the project
may be modified as the result of mutual agreement between TIER Technologies,
Inc. and Unisys USD and with the approval of CSA.
Name Project Phase
---- -------------
Xxxx Xxxxxxx (60%) Scoping Study
Xxx Xxxx (60%) Scoping Study
Xxx Xxxx (100%) Parts 1 and 2(1)
Parts 1 and 2
-----------------
(1) Parts 1 and 2 refer to the full project that will be implemented in
accordance with the CSA approved project management plans developed during the
Scoping Study.
27
SCHEDULE C
BUSINESS PRACTICE GUIDELINES AND CODE OF ETHICAL CONDUCT
A. BUSINESS ETHICS
Contractor shall perform the Work under this Agreement in accordance with
applicable law and high ethical standards. Contractor, in performing the
Work, shall not attempt to influence present or prospective customers of
Unisys in the public or private sector through bribes, payoffs or kickbacks
and shall not maintain slush funds or make political contributions in any
manner which would imply that such illegal payments are made by or on
behalf of Unisys, including its subsidiaries, affiliates, officers,
directors and employees, or in relation to the Work. In the event
Contractor breaches any of these provisions, Unisys shall have the right to
cancel this Agreement and obtain a full refund of all payments made to
Contractor hereunder.
B. POLITICAL CONTRIBUTIONS
No contribution in cash, services, or otherwise shall be made directly or
indirectly by Contractor or any individual or organization related to
Contractor on behalf of Unisys, its subsidiaries, affiliates, officers,
directors or employees, to any political campaign or candidate, whether or
not the contribution could otherwise be lawfully made in the country
concerned. Neither Contractor nor any individual or organization related
thereto shall be reimbursed, directly or indirectly, by Unisys, its
subsidiaries, affiliates, officers, directors or employees for any such
contribution to a political campaign or candidate.
Neither Contractor nor any individual or organization related thereto shall
solicit on behalf of Unisys, its subsidiaries, affiliates, officers,
directors or employees from any one or more other such directors, officers
or employees any contribution to any political campaign or candidate with a
view toward transmission of the amounts collected to a candidate or
campaign fund as contributions on behalf of Contractor or Unisys, its
subsidiaries, affiliates, officers, directors or employees.
Nothing in this statement of Unisys Business Practice Guidelines is
intended in any way to restrict personal contributions by Contractor or any
individual or organization related thereto. The only intent of this policy
is to prevent the inference that the contribution is being made by or on
behalf of Unisys, or any subsidiary, affiliate, officer, director or
employee of Unisys, singly or as a group.
28
SCHEDULE D: TIER PROJECT DELIVERABLES
29
1
CHILD SUPPORT AGENCY SYSTEM REDEVELOPMENT PROJECT DEFINITION OF TIER TECHNOLOGIES
DELIVERABLES SUPPLEMENT TO DELIVERABLE 4.5 PRICE AND PAYMENT SCHEDULE
SCHEDULE OF DELIVERABLES FROM MAPPING TO PROJECT PLAN DEFINITION
PRICE AND PAYMENT SCHEDULE DELIVERABLES
JUNE 1997 DELIVERABLES:
----------------------------------------------------------------------------------------------------------------------------------
(Added) JAD Session Structure & Description of JAD Business Capture Form and associated
Deliverables deliverables. Description of session process.
----------------------------------------------------------------------------------------------------------------------------------
JAD Schedule of Activities Input to the Project Master Plan. Describes week-by-week JAD
topics and dates for lLevel 1 JAD.
----------------------------------------------------------------------------------------------------------------------------------
Architectural Standards Guidelines and Standards Outline Detailed document will be developed after a general outline
of suggested standards has been reviewed. This deliverable
is that outline consisting of recommended project standards or
guidelines for component development and management, GUI
presentation, use of messaging subsystem, use of security
subsystem, use of permitted values subsystem, use of composer
naming conventions, use and development of developer
templates, model management and encyclopedia management in
a component/CSE environment, data model change management, data
naming conventions, migration across test/production regions,
data base support during development.
JULY 1997 DELIVERABLES:
----------------------------------------------------------------------------------------------------------------------------------
Architectural Standards Recommended Project This is the more formal follow-on document to the Guidelines
Architectural Standards and Standards Outline from June. This document will define
the standards and guidelines in sufficient detail to be
useable by systems developers for CSA Redevelopment. Since
portions of this document will require approval from
different organisations (e.g. ATO standards, ATO Data
Administration, CSA Standards), the document will be
delivered as a set of recommendations. Acceptance will be
based on the recommendations, not on final approval of each
section.
June JAD Business Capture Accounting Enquiries Business JAD business Capture Details will vary week-to-week, but a
Capture Details completed Level 1 package will contain the Business Capture
Form itself, Data Requirements (as a composer model), Flow
Diagram, Preliminary Window Designs. Specific to Accounting
Enquiries.
----------------------------------------------------------------------------------------------------------------------------------
2
CHILD SUPPORT AGENCY SYSTEM REDEVELOPMENT PROJECT DEFINITION OF TIER TECHNOLOGIES
DELIVERABLES SUPPLEMENT TO DELIVERABLE 4.5 PRICE AND PAYMENT SCHEDULE
----------------------------------------------------------------------------------------------------------------------------------
SCHEDULE OF DELIVERABLES FROM MAPPING TO PROJECT PLAN DEFINITION
PRICE AND PAYMENT SCHEDULE DELIVERABLES
----------------------------------------------------------------------------------------------------------------------------------
AUGUST 1997 DELIVERABLES:
----------------------------------------------------------------------------------------------------------------------------------
July JAD Business Capture Financial Management Reporting A completed Level 1 package containing the Business Capture
Form itself, Data Requirements Business Capture Details
(as a composer model), Flow Diagram, Preliminary Window
Designs. Specific to Financial Management reporting.
----------------------------------------------------------------------------------------------------------------------------------
Basic Payment Processing A completed Level 1 package containing the Business Capture
Business Capture Details Form itself, Data Requirements (as a composer model), Flow
Diagram, Preliminary Window Designs. Specific to Basic Payment
Processing.
----------------------------------------------------------------------------------------------------------------------------------
Complex Payment Processing A completed Level 1 package containing the Business Capture
Business Capture Details Form itself, Data Requirements (as a composer model), Flow
Diagram, Preliminary Window Designs. Specific to Complex
Payment Processing.
----------------------------------------------------------------------------------------------------------------------------------
Client Data (old Registration) A completed Level 1 package containing the Business Capture
Business Capture Details Form itself, Data Requirements (as a composer model), Flow
Diagram, Preliminary Window Designs. Specific to Client Data
including data about Payer, Payee, Child and Agent.
----------------------------------------------------------------------------------------------------------------------------------
Employer Structures Business A completed Level 1 package containing the Business Capture
Capture Details. Form itself, Data Requirements (as a composer model), Flow
Diagram, Preliminary Window Designs. Specific to Employer
Structures.
----------------------------------------------------------------------------------------------------------------------------------
Service Options/Eligibility A completed Level 1 package containing the Business Capture
Business Capture Details Form itself, Data Requirements (as a composer model), Flow
Diagram, Preliminary Window Designs. Specific to Service
Options/Eligibility.
----------------------------------------------------------------------------------------------------------------------------------
Enquiries Business Capture A completed Level 1 package containing the Business Capture
Details Form itself, Data Requirements (as a composer model), Flow
Diagram, Preliminary Window Designs. Specific to Enquiries.
----------------------------------------------------------------------------------------------------------------------------------
3
CHILD SUPPORT AGENCY SYSTEM REDEVELOPMENT PROJECT DEFINITION OF TIER TECHNOLOGIES
DELIVERABLES SUPPLEMENT TO DELIVERABLE 4.5 PRICE AND PAYMENT SCHEDULE
----------------------------------------------------------------------------------------------------------------------------------
SCHEDULE OF DELIVERABLES FROM MAPPING TO PROJECT PLAN DEFINITION
PRICE AND PAYMENT SCHEDULE DELIVERABLES
----------------------------------------------------------------------------------------------------------------------------------
Reports Business Capture Details A completed Level 1 package containing the Business Capture
Form itself, Data Requirements (as a composer model), Flow
Diagram, Preliminary Window Designs. Specific to Generalised
CSA Reports not covered by any specific JAD.
SEPTEMBER 1997 DELIVERABLES:
----------------------------------------------------------------------------------------------------------------------------------
August JAD Business Capture Policy Considerations Business A completed Level 1 package containing the Business Capture
Capture Details Form itself, Data Requirements (as a composer model), Flow
Diagram, Preliminary Window Designs. Specific to Policy
Considerations.
----------------------------------------------------------------------------------------------------------------------------------
Communications Business Capture A completed Level 1 package containing the Business Capture
Detail Form itself, Data Requirements (as a composer model), Flow
Diagram, Preliminary Window Designs. Specific to outbound
Communications from CSA.
----------------------------------------------------------------------------------------------------------------------------------
Payment and Disbursement A completed Level 1 package containing the Business Capture
Options Business Capture Details Form itself, Data Requirements (as a composer model), Flow
Diagram, Preliminary Window Designs. Specific to Payment and
Disbursement Options.
----------------------------------------------------------------------------------------------------------------------------------
Complaints and Ministerials A completed Level 1 package containing the Business Capture
Business Capture Form itself, Data Requirements (as a composer model), Flow
Diagram, Preliminary Window Designs. Specific to
Complaints/Ministerials.
----------------------------------------------------------------------------------------------------------------------------------
(added) Xxxxx 0 XXX Xxxxxxxxxxxx for Detailed Client, Server, and Window specifications ready for
Accounting Enquiries coding.
----------------------------------------------------------------------------------------------------------------------------------
Xxxxx 0 XXX Xxxxxxxxxxxx for Detailed Client, Server, and Window specifications ready for
Financial Management Reporting coding.
----------------------------------------------------------------------------------------------------------------------------------
Xxxxx 0 XXX Xxxxxxxxxxxx for Detailed Client, Server, and Window specifications ready for
Client Data coding.
----------------------------------------------------------------------------------------------------------------------------------
Xxxxx 0 XXX Xxxxxxxxxxxx for Detailed Client, Server, and Window specifications ready for
Enquiries coding.
4
CHILD SUPPORT AGENCY SYSTEM REDEVELOPMENT PROJECT DEFINITION OF TIER TECHNOLOGIES
DELIVERABLES SUPPLEMENT TO DELIVERABLE 4.5 PRICE AND PAYMENT SCHEDULE
----------------------------------------------------------------------------------------------------------------------------------
SCHEDULE OF DELIVERABLES FROM MAPPING TO PROJECT PLAN DEFINITION
PRICE AND PAYMENT SCHEDULE DELIVERABLES
----------------------------------------------------------------------------------------------------------------------------------
Level 2 JAD Deliverables Report layouts and data information sufficient to code the reports.
for Reports
----------------------------------------------------------------------------------------------------------------------------------
OCTOBER 1997 DELIVERABLES:
----------------------------------------------------------------------------------------------------------------------------------
September JAD Business Capture Workflow Management for Part 1 A completed Level 1 package containing the Business Capture
Business Capture Form itself, Data Requirements (as a composer model), Flow
Diagram, Preliminary Window Designs. Specific to Workflow
Management.
----------------------------------------------------------------------------------------------------------------------------------
(added) Xxxxx 0 XXX Xxxxxxxxxxxx for Detailed Client, Server, and Window specifications ready for
Basic Payment Processing coding.
----------------------------------------------------------------------------------------------------------------------------------
Xxxxx 0 XXX Xxxxxxxxxxxx for Detailed Client, Server, and Window specifications ready for
Complex Payment Processing coding.
----------------------------------------------------------------------------------------------------------------------------------
Xxxxx 0 XXX Xxxxxxxxxxxx for Detailed Client, Server, and Window specifications ready for
Policy Considerations coding.
----------------------------------------------------------------------------------------------------------------------------------
Xxxxx 0 XXX Xxxxxxxxxxxx for Detailed Client, Server, and Window specifications ready for
Communications coding.
----------------------------------------------------------------------------------------------------------------------------------
Xxxxx 0 XXX Xxxxxxxxxxxx for Detailed Client, Server, and Window specifications ready for
Payment and Disbursement Options coding.
----------------------------------------------------------------------------------------------------------------------------------
Xxxxx 0 XXX Xxxxxxxxxxxx for Detailed Client, Server, and Window specifications ready for
Complaints and Ministerials coding.
----------------------------------------------------------------------------------------------------------------------------------
Component Models Part 1 Component Models Composer ERD ready for Transformation; Windows.
----------------------------------------------------------------------------------------------------------------------------------
5
CHILD SUPPORT AGENCY SYSTEM REDEVELOPMENT PROJECT DEFINITION OF TIER TECHNOLOGIES
DELIVERABLES SUPPLEMENT TO DELIVERABLE 4.5 PRICE AND PAYMENT SCHEDULE
----------------------------------------------------------------------------------------------------------------------------------
SCHEDULE OF DELIVERABLES FROM MAPPING TO PROJECT PLAN DEFINITION
PRICE AND PAYMENT SCHEDULE DELIVERABLES
----------------------------------------------------------------------------------------------------------------------------------
NOVEMBER 1997 DELIVERABLES:
----------------------------------------------------------------------------------------------------------------------------------
(added) Xxxxx 0 XXX Xxxxxxxxxxxx for Detailed Client, Server, and Window specifications
Part 1 Work Flow Management ready for coding.
----------------------------------------------------------------------------------------------------------------------------------
Architectural Subsystems Development Templates Standard architectural activities, such as consistent
behaviour of common window types, will be enforced through
the use of pre-defined templates. Templates are not merely
visual enforcement, but contain code to assure that
consistent processing is enforced where defined by the
project architecture. All developers will be mandated to use
the templates.
----------------------------------------------------------------------------------------------------------------------------------
Correspondence Support Specifications to code the letter/form creation subsystem.
subsystem specifications Generation and storage (forms management) is considered
outside the scope of CSA Redevelopment and is handled by a
separate CSA initiative under a separate Tender.
----------------------------------------------------------------------------------------------------------------------------------
Business Code and Rules These are the underlying specifications for infrastructural
Transfer specifications tables to support Workflow Management.
----------------------------------------------------------------------------------------------------------------------------------
Common Subsystem Component Specifications for coding of the Security, Permitted Values,
Requirements Messaging subsystems.
----------------------------------------------------------------------------------------------------------------------------------
Physical Data Base Part 1 Physical Data Base Initial physical database.
----------------------------------------------------------------------------------------------------------------------------------
CHILD SUPPORT AGENCY SYSTEM REDEVELOPMENT PROJECT DEFINITION OF TIER TECHNOLOGIES
DELIVERABLES SUPPLEMENT TO DELIVERABLE 4.5 PRICE AND PAYMENT SCHEDULE
----------------------------------------------------------------------------------------------------------------------------------
SCHEDULE OF DELIVERABLES FROM MAPPING TO PROJECT PLAN DEFINITION
PRICE AND PAYMENT SCHEDULE DELIVERABLES
-----------------------------------------------------------------------------------------------------------------------------------
DECEMBER 1997 DELIVERABLES:
-----------------------------------------------------------------------------------------------------------------------------------
Unit Tested Components Part 1 Unit Tested Components Unit tested components will be released in functional packages
(Specific Components to be as they are developed Generally, components will be
following construction. constructed and tested in the same sequence that they were
defined at start of coding in delivered from the JAD sessions. Dependencies on architectural
October) components or other functional components could vary this
sequence.
-----------------------------------------------------------------------------------------------------------------------------------
JANUARY 1998 DELIVERABLES:
-----------------------------------------------------------------------------------------------------------------------------------
Unit Tested Components Part 1 Unit Tested Components Unit tested components will be released in functional packages
(Specific Components to be as they are developed Generally, components will
following construction. be constructed and tested in the same sequence that
defined at start of coding in they were delivered from the JAD sessions. Dependencies on
October) architectural components or other functional components could
vary this sequence.
-----------------------------------------------------------------------------------------------------------------------------------
FEBRUARY 1998 DELIVERABLES:
-----------------------------------------------------------------------------------------------------------------------------------
Unit Tested Components Part 1 Unit Tested Components Unit tested components will be released in functional packages
(Specific Components to be as they are developed following construction. Generally,
defined at start of coding in components will be constructed and tested in the same
October) sequence that they were delivered from the JAD sessions.
Dependencies on architectural components or other functional
components could vary this sequence.
January JAD Business Capture Part 2 Business Capture of A completed Level 1 package containing the Business Capture
Subtrack Functions to be Form itself, Data Requirements (as a composer model),
defined in Flow Diagram, Preliminary Window Designs. Specific to
November/December Workflow Management.
-----------------------------------------------------------------------------------------------------------------------------------
6
CHILD SUPPORT AGENCY SYSTEM REDEVELOPMENT PROJECT DEFINITION OF TIER TECHNOLOGIES
DELIVERABLES SUPPLEMENT TO DELIVERABLE 4.5 PRICE AND PAYMENT SCHEDULE
-----------------------------------------------------------------------------------------------------------------------------------
SCHEDULE OF dELIVERABLES FROM MAPPING TO PROJECT PLAN DEFINITION
PRICE AND PAYMENT SCHEDULE DELIVERABLES
-----------------------------------------------------------------------------------------------------------------------------------
MARCH 1998 DELIVERABLES:
-----------------------------------------------------------------------------------------------------------------------------------
Unit Tested Components Part 1 Unit Tested Components Unit tested components will be released in functional packages
(Specific Components to be as they are developed following construction. Generally,
defined at start of coding in components will be constructed and tested in the same
October) sequence that they were delivered from the JAD sessions.
Dependencies on architectural components or other functional
components could vary this sequence.
-----------------------------------------------------------------------------------------------------------------------------------
February JAD Business Capture Part 2 Business Capture of A completed level 1 package containing the Business Capture
Subtrack Functions to be Form itself, Data Requirements (as a composer model),
defined in November/December Flow Diagram, Preliminary Window Designs, Specific to Workflow
Management.
-----------------------------------------------------------------------------------------------------------------------------------
APRIL 1998 DELIVERABLES:
-----------------------------------------------------------------------------------------------------------------------------------
Unit Tested Components Part 1 Unit Tested Components Unit tested components will be released in functional packages
(Specific Components to be as they are developed following construction. Generally,
defined at start of coding in components will be constructed and tested in the same
October) sequence that they were delivered from the JAD sessions.
Dependencies on architectural components or other functional
components could vary this sequence.
-----------------------------------------------------------------------------------------------------------------------------------
Part 1 Unit/Integration Part 1 Unit/Integration Testing This document certifies that all objects in the system for
Testing Report Report Part 1 have been tested both as individual units and as
integrated functional components. Allows the start of
System Test.
-----------------------------------------------------------------------------------------------------------------------------------
7
CHILD SUPPORT AGENCY SYSTEM REDEVELOPMENT PROJECT DEFINITION OF TIER TECHNOLOGIES
DELIVERABLES SUPPLEMENT TO DELIVERABLE 4.5 PRICE AND PAYMENT SCHEDULE
-----------------------------------------------------------------------------------------------------------------------------------
SCHEDULE OF DELIVERABLES FROM MAPPING TO PROJECT PLAN DEFINITION
PRICE AND PAYMENT SCHEDULE DELIVERABLES
-----------------------------------------------------------------------------------------------------------------------------------
(added) System Test Scenarios Self defining.
implemented; System Testing
Begins for Part 1
-----------------------------------------------------------------------------------------------------------------------------------
March JAD Business Capture Part 2 Business Capture of A completed Level 1 package containing the Business Capture
Subtrack Functions to be Form itself, Data Requirements (as a composer model),
defined in November/December Flow Diagram, Preliminary Window Designs. Specific to Workflow
Management.
-----------------------------------------------------------------------------------------------------------------------------------
(added) Xxxxx 0 XXX Xxxxxxxxxxxx for Detailed Client, Server, and Window specifications ready for
Part 2 (to be defined in coding.
November/December)
-----------------------------------------------------------------------------------------------------------------------------------
MAY 1998 DELIVERABLES:
-----------------------------------------------------------------------------------------------------------------------------------
April JAD Business Capture Part 2 Business Capture of A completed Level 1 package containing the Business Capture
Subtrack Functions to be Form itself, Data Requirements (as a composer model), Flow
defined in November/December Diagram, Preliminary Window Designs. Specific to Workflow
Management.
-----------------------------------------------------------------------------------------------------------------------------------
Unit Tested Components Part 2 Unit Tested Components Unit tested components will be released in functional packages
as they are developed following construction. Generally,
components will be constructed and tested in the same
sequence that they were delivered form the JAD sessions.
Dependencies on architectural components or other functional
components could vary this sequence.
-----------------------------------------------------------------------------------------------------------------------------------
(added) Xxxxx 0 XXX Xxxxxxxxxxxx for Detailed Client, Server, and Window specifications ready for
Part 2 (to be defined in coding.
November/December)
-----------------------------------------------------------------------------------------------------------------------------------
8
CHILD SUPPORT AGENCY SYSTEM REDEVELOPMENT PROJECT DEFINITION OF TIER TECHNOLOGIES
DELIVERABLES SUPPLEMENT TO DELIVERABLE 4.5 PRICE AND PAYMENT SCHEDULE
-----------------------------------------------------------------------------------------------------------------------------------
SCHEDULE OF DELIVERABLES FROM MAPPING TO PROJECT PLAN DEFINITION
PRICE AND PAYMENT SCHEDULE DELIVERABLES
-----------------------------------------------------------------------------------------------------------------------------------
JUNE 1998 DELIVERABLES:
-----------------------------------------------------------------------------------------------------------------------------------
(added) Part 1 System Test Finishes Selfdefining.
-----------------------------------------------------------------------------------------------------------------------------------
(added) Xxxxx 0 XXX Xxxxxxxxxxxx for Detailed Client, Server, and Window specifications
Part 2 (to be defined in ready for coding.
November/December)
-----------------------------------------------------------------------------------------------------------------------------------
Unit Tested Components Part 2 Unit Tested Components Unit tested components will be released in functional packages
as they are developed following construction. Generally,
components will be constructed and tested in the same
sequence that they were delivered from the JAD sessions.
Dependencies on architectural components or other functional
components could vary this sequence.
-----------------------------------------------------------------------------------------------------------------------------------
Component Models Part 2 Component Models Composer ERD ready for Transformation; Windows. This ERD will
be an update/add-on to the ERD for Part 1.
-----------------------------------------------------------------------------------------------------------------------------------
Updated Physical Data Base Updated Physical Data Base for The Part 1 data base will be enhanced to support Part 2 based
Part 2 on the ERD delivered above.
-----------------------------------------------------------------------------------------------------------------------------------
Architectural Subsystems Part 2 Architectural Subsystems Completely new architectural subsystems, except to support
(as defined by December 1997) Risk Management, are unlikely for Part 2. Some modification/
addition to Part 1 subsystems may be needed. This will be
determined as part of detailed planning for Part 2 in December
1997.
-----------------------------------------------------------------------------------------------------------------------------------
JULY 1998 DELIVERABLES:
-----------------------------------------------------------------------------------------------------------------------------------
System Testing Completion Part 1 System Testing Defines the scenarios used, the test statistics (errors,
Report Completion Report fixes, changes), and certifies that all required test
conditions have been satisfied to start acceptance testing.
-----------------------------------------------------------------------------------------------------------------------------------
9
CHILD SUPPORT AGENCY SYSTEM REDEVELOPMENT PROJECT DEFINITION OF TIER TECHNOLOGIES
DELIVERABLES SUPPLEMENT TO DELIVERABLE 4.5 PRICE AND PAYMENT SCHEDULE
-----------------------------------------------------------------------------------------------------------------------------------
SCHEDULE OF DELIVERABLES FROM MAPPING TO PROJECT PLAN DEFINITION
PRICE AND PAYMENT SCHEDULE DELIVERABLES
-----------------------------------------------------------------------------------------------------------------------------------
Unit Tested Components Part 2 Unit Tested Components Unit tested components will be released in functional packages
as they are developed following construction. Generally,
components will be constructed and tested in the same
sequence that they were delivered from the JAD sessions.
Dependencies on architectural components or other functional
components could vary this sequence.
-----------------------------------------------------------------------------------------------------------------------------------
AUGUST 1998 DELIVERABLES:
-----------------------------------------------------------------------------------------------------------------------------------
Part 2 Unit/Integration Part 2 Unit/Integration Testing This document certifies that all objects in the system for
Testing Completion Report Completion Report Part 1 have been tested both as individual units
and as integrated functional components. Allows the start of
System Test.
-----------------------------------------------------------------------------------------------------------------------------------
(added) System Test Scenarios Self defining.
implemented; System Testing
Begins for Part 2
-----------------------------------------------------------------------------------------------------------------------------------
SEPTEMBER 1998 DELIVERABLES:
-----------------------------------------------------------------------------------------------------------------------------------
System Testing Completion System Testing Completion The system testing completion report will describe (at a high
Report Report for Part 2 level) the tests that have been conducted, and will be signed
off by the testing coordinator to indicate completion of
the system testing. This will be the point at which the
complete system is ready for system testing.
-----------------------------------------------------------------------------------------------------------------------------------
OCTOBER 1998 DELIVERABLES:
-----------------------------------------------------------------------------------------------------------------------------------
Software Modifications N/A During acceptance testing the application software will be
(Acceptance Testing) satisfactorily modified to comply with documented fixes
required by CSA to make the system acceptable. Acceptance
by CSA will constitute acceptance of this deliverable.
------------------------------------------------------------------------------------------------------------------------------------
10
CHILD SUPPORT AGENCY SYSTEM REDEVELOPMENT PROJECT DEFINITION OF TIER TECNOLOGIES
DELIVERABLES SUPPLEMENT TO DELIVERABLE 4.5 PRICE AND PAYMENT SCHEDULE
------------------------------------------------------------------------------------------------------------------------------------
SCHEDULE OF DELIVERABLES FROM MAPPING TO PROJECT PLAN DEFINITION
PRICE AND PAYMENT SCHEDULE DELIVERABLES
------------------------------------------------------------------------------------------------------------------------------------
NOVEMBER 1998 DELIVERABLES:
------------------------------------------------------------------------------------------------------------------------------------
Software Modifications N/A The application software will be modified to comply with
documented fixes required by CSA to make the system
acceptable. Acceptance by CSA will constitute acceptance of
this deliverable.
------------------------------------------------------------------------------------------------------------------------------------
11
