1
Exhibit 10.9
[ICER CORPORATION LOGO]
THIS AGREEMENT is made this 15th day of October, 1993 between Xx. Xxxx X. Cover
(hereinafter called "Mr. Cover"), and ICER Corporation (hereinafter called
ICER), an Arizona Corporation.
WITNESSETH:
WHEREAS, Mr. Cover has critical skills and industry knowledge material to
the development and marketing of products relating to the business of ICER
NOW, THEREFORE, the parties agree as follows:
ARTICLE I: SCOPE OF THE AGREEMENT
1. Mr. Cover agrees to join the management team of ICER Corporation as an
officer and director of the company for one (1) year full time
employment. His position will encompass responsibility for technology
and product development, but will not be limited to such areas.
2. In accordance with his position with ICER, Mr. Cover agrees not to
engage in independent business relations with competitors of ICER
wherein:
i) Competitors of ICER are defined as companies engaged in the
manufacture and/or design of electronic weapons that are less than
fourteen inches in length and are non lethal.
2
ICER CORPORATION COVER AGREEMENT
ii) Independent business relations are defined as any fee for service
arrangement, or any product development work with competitors as
defined in i).
iii) Independent business relations do not include any work or
relationships conducted within the framework of Mr. Cover's
representation of ICER.
iv) Mr. Cover is free to leave unaltered the licensing arrangements
already in existence with such competitors and to pursue
compensation from such competitors for the use of his existing
patents at his discretion.
v) The provisions of this section shall remain in full force and effect
for the period of Mr. Cover's employment with ICER.
vi) Breach of this agreement wherein Mr. Cover engages in independent
business relations with competitors of ICER during the period
described in iv), will result in the forfeiture of Mr. Cover's
remaining stock options and the immediate termination of his
employment with ICER.
3. Mr. Cover agrees to license ICER Corporation: Rights to utilize the
TASER trademark in conjunction with product marketing and other business
functions. Further, Mr. Cover agrees not to license the use of the TASER
trademark to any company not already licensed for such use (see addendum
I).
4. Mr. Cover will provide ICER with a comprehensive listing of his existing
patents and trademarks to be attached as an addendum to this document
(addendum I). Such listing will include the names and addresses of all
licensed entities, and all renewal rights for such licensing for said
patents and trademarks.
5. All technical designs and intellectual property generated during Mr.
Cover's work with ICER will be work-made-for-hire or assigned to ICER
and will be the exclusive property of the Company.
6. Mr. Cover affirms that he has complete authority over the patents and
trademarks in the agreement and that he is free to enter into this
agreement without any hindrance from or violation of prior commitments.
Mr. Cover further affirms that he is not bound by non-disclosure or
trade secret protection clauses which would inhibit him from fully
applying his knowledge to his work at ICER. Accordingly, Mr. Cover
indemnifies ICER from any damages
3
ICER CORPORATION COVER AGREEMENT
--------------------------------------------------------------------------------
resulting from litigation regarding prior commitments which would preclude
him from having entered into this agreement.
7. Mr. Cover agrees not to disclose the confidential information of ICER
Corporation without clear consent from the other members of management.
Such information will include any information which is clearly designated
as confidential, including trade secrets developed, marketing plans,
manufacturing know how, financial or other data which is designated as
confidential.
ARTICLE II: COMPENSATION
1. Mr. Cover will be paid a salary of $2,500 per month during the time of his
full time employment with the Company.
2. Mr. Cover will receive stock options for 10,000 shares of ICER Corporation
representing ten (10) percent of the company with the following vesting
schedule:
2,500 shares at initiation of this agreement
2,500 shares upon completion of functional prototype
2,500 shares at first shipment of product to market
2,500 shares on Oct. 15, 1994 (1 year).
3. These options will have a strike price of $0.36 (thirty six cents per
share) and a time to expiration of 5 years during Mr. Cover's continued
involvement with the company.
4. Further, Mr. Cover will receive a cash bonus in the amount of the exercise
price of the stock options at the date and time of each stock option
vesting that can be used only for exercising the above stock options.
5. Mr. Cover's equity position (via stock options) is guaranteed not to be
diluted below ten (10) percent through the first $250,000 of invested
capital.
4
ICER CORPORATION COVER AGREEMENT
--------------------------------------------------------------------------------
ARTICLE III: CONTINGENCIES
1. Xxxxxxx X. Xxxxx and Xxxxxxxx X. Xxxxx may elect to discontinue the
activities of the corporation upon 2 weeks' notice to Mr. Cover. Under such
circumstances, Xx. Xxxxxxxx X. Xxxxx will have the right to reclaim the
liquid assets of the company not to exceed the amount of his cumulative
investment. Further, from date of such notice Mr. Cover will have the right
to use his skills and trademarks for whatever purpose he desires.
2. Mr. Cover may elect not to continue his work with the Company with 2 weeks'
notice. Mr. Cover would retain all vested options with right to exercise
for 6 months from the date of departure from the company. Unvested options
would be forfeited, and the corresponding shares would remain the property
of the Company.
3. In the event that Mr. Cover should not be able to exercise power of
attorney over the equity in his name while the company is privately held
(i.e. the shares are not on the public market), the Corporation would have
option to repurchase such shares within 6 months from Mr. Cover's estate or
heirs for an amount equal to the greater of:
i) The book value of such shares calculated by standard accounting
practices
ii) $10 per share
iii) Amounts solicited from competitive bidders.
AGREED,
By: /s/ Xxxxxxx Xxxxx By: /s/ Xxxx X. Cover
----------------------- -----------------------
Xxxxxxx Xxxxx Xxxx X. Cover
For ICER CORPORATION
Dated: 10/15/93
--------------------
[SEAL]
CORPORATE SEAL
5
AMENDMENT TO LICENSING AGREEMENT
THIS AMENDMENT TO LICENSING AGREEMENT ("AMENDMENT") is made and entered
into this 31st day of August, 1996, by and between Xxxx X. Cover, Jr. ["XXXX
COVER"] and Air Taser, Incorporated f/k/a/ ICER Corporation, an Arizona
corporation ["AIR TASER"].
In consideration of the covenants and agreements hereinafter set forth,
the amounts of money paid in accordance herewith, and other good and valuable
consideration, the receipt and sufficiency of which are hereby acknowledged,
that certain Licensing Agreement dated October 15, 1993 ("LICENSE") is hereby
amended as follows:
1. AIR TASER hereby agrees to pay to XXXX COVER and XXXX COVER hereby
agrees to accept the sum of One Hundred Thousand Dollars ($100,000) in full
payment and satisfaction of any and all minimum royalties and earned royalties
now due or hereinafter accruing to XXXX COVER from AIR TASER pursuant to the
terms of the LICENSE as originally executed or as subsequently modified or
amended, in writing, prior to the date hereof. Said payment shall be made
contemporaneously with the full execution and delivery of this AMENDMENT by
each of the parties hereto.
2. XXXX COVER, for good and valuable consideration, the receipt and
sufficiency of which are hereby acknowledged, for: (i) himself, (ii) his heirs,
(iii) his legal representatives, legatees, successors and assigns of all of the
foregoing persons and entities, hereby releases and forever discharges AIR
TASER, any past, present and future shareholders, successors, assigns, officers,
directors, agents, attorneys and employees of AIR TASER, together with their
respective heirs, legal representatives, legatees, successors, and assigns, of
and from all actions, claims, demands, damages, debts, losses, liabilities,
indebtedness, causes of action either at law or in equity and obligations of
whatever kind or nature, whether known or unknown, direct or indirect, new or
existing, by reason of any matter, cause or thing whatsoever from the beginning
of the world to the date hereof concerning any minimum of earned royalties which
are now due or which may hereafter accrue to XXXX COVER pursuant to the terms of
the LICENSE.
3. This AMENDMENT embodies the entire agreement between the parties and
supersedes any prior agreements or understanding between them in connection
with the subject matter hereof and the transactions contemplated hereby. There
are no oral or parol agreements, representations, or inducements existing
between the parties relating to this transaction which are not expressly set
forth herein and covered hereby. All terms of this AMENDMENT are contractual
and not mere recitals and shall be construed as if drafted by all parties
hereto. The terms of this AMENDMENT are and shall be binding upon each of the
parties hereto, their agents, employees successors and assigns, and upon all
other persons
-1 of 2-
6
claiming any interest in the subject matter hereof through any of the parties
hereto.
4. To the extent that this AMENDMENT contradicts, is inconsistent or in
conflict with any prior agreements between or among any or all of the parties,
this AMENDMENT supersedes any conflicting or inconsistent provision of any prior
agreement and is controlling to the extent necessary to resolve such conflict or
inconsistency. Any and all provisions in a prior agreement not inconsistent with
this AMENDMENT remain valid and binding.
5. It is acknowledged that the parties hereto have read this AMENDMENT
and consulted counsel before executing same; that they have relied upon their
own judgment and that of their respective counsel in executing this AMENDMENT
and have not relied on or been induced by any representation, statement or act
by any other party referred to in this instrument; that the parties hereto have
entered into this AMENDMENT voluntarily, with full knowledge of its
significance; and that this AMENDMENT is in all respects complete and final.
6. If any term or provision of this AMENDMENT or the application thereof
to any person, entity or circumstance shall, to any extent, be held invalid
and/or unenforceable by a court of competent jurisdiction, the remainder of this
AMENDMENT, or the application of such term or provisions to persons, entities or
circumstances other than those as to which it is held invalid or unenforceable
shall not be affected thereby, and each term and provision of the AMENDMENT
shall be valid and be enforced to the fullest extent permitted by law.
7. This AMENDMENT may not be amended, changed, or modified except by
written instrument executed by all parties hereto.
8. This AMENDMENT shall be construed and enforced according to the laws
of the State of Arizona.
9. This AMENDMENT may be executed in any number of counterparts, each of
which shall be deemed an original, but all of which together shall constitute
but one instrument.
IN WITNESS WHEREOF, the parties have caused this AMENDMENT to be duly
executed as of the day and year first above written.
AIR TASER, INCORPORATED
By: /s/ Xxxxxxx Xxxxx /s/ Xxxx X. Cover, Jr.
----------------- ------------------
Xxxx X. Cover, Jr.
00 Xxxx Xxxx Xxxx
Xxxxxxxx, XX 00000
Title: President
--------------
-0 xx 0-
0
0xx XXXXXXXXX TO THE AIR TASER LICENSING AGREEMENT
This 2nd Amendment to the AIR TASER licensing agreement (2nd Amendment) is
made and entered into this 31st day of August, 1996, by and between Xxxx X.
Cover, Jr. ["XXXX COVER"] and AIR TASER, Incorporated f/k/a ICER Corporation, an
Arizona Corporation ["AIR TASER"].
In consideration of the covenants and agreements hereinafter set forth,
the amounts of money paid in accordance herewith, and other good and valuable
considerations, the receipt and sufficiency of which are hereby acknowledged,
that certain Licensing Agreement dated October 15, 1993 ["LICENSE"] is hereby
amended as follows:
1. AIR TASER hereby agrees to pay to Xxxx Cover, and Xxxx Cover hereby agrees to
accept the sum of FIFTEEN THOUSAND DOLLARS ($15,000) in full payment for a
limited exclusivity for rights to technology embodied in U.S. patent
#5,078,117 ["The '117 Patent"]. In accordance with this limited exclusivity,
Xxxx Cover agrees that he shall license no other company, person, or entity
of any type to utilize the technology described in the '117 patent for use in
electronic weapon system other than the companies licensed for such use prior
to this 31st day of August, 1996. These pre-existing licenses are non
transferable and shall not be transferred to any entity other than the
original license holder as enumerated below. Further, Mr. Cover shall not
expand or modify the rights of the existing licensees, as listed below,
without written approval from AIR TASER, Inc. A comprehensive listing of such
licensed companies is given below:
a) EESTI, Engineering, LLC, a company in Poway, CA. (Copy of license
attached as Exhibit A.)
b) Xxxx Xxx Park, d.b.a. Bestex, Co. (Copy of license addendum regarding
'117 patent rights attached as Exhibit B.)
2. This agreement in no way binds Mr. Cover from licensing rights to utilize the
'117 technology in applications which are not electronic weapons. Mr. Cover
is free to license any person, company, association, agency, or entity of any
type to utilize the '117 technology so long as the license contains the
specific language below:
"The licensee may not use the technology embodied in U.S. Patent
#5,078,117 in conjunction with any electronic weapon system. The violation
of this restriction shall cause immediate cancellation of this license
without notice, and may cause damages payable to Xxxx X. Cover and/or AIR
TASER, Inc."
3. If any term or provision of this 2nd Amendment or the application thereof to
any person entity, or circumstance shall, to any extent, be held invalid and
or unenforceable by a court of competent jurisdiction, the remainder of this
2nd Amendment, or the application of such term or provisions to persons,
entities, or
8
circumstances other than those as to which it is held invalid or
unenforceable shall not be affected thereby, and each term and provision of
the 2nd Amendment shall be valid and be enforced to the fullest extent
permitted by law.
4. This 2nd Amendment may not be amended, changed, or modified except by
written instrument executed by all parties hereto.
5. This 2nd Amendment shall be construed and enforced according to the laws of
the state of Arizona.
IN WITNESS WHEREOF, the parties have caused this 2nd Amendment to be
duly executed as of the day and year first above written.
AIR TASER, INCORPORATED,
By: /s/ Xxxxxxx Xxxxx /s/ Xxxx X. Cover, Jr.
_________________ ______________________
President Xxxx X. Cover, Jr.
00 Xxxx Xxxx Xxxx
Xxxxxxxx, XX 00000
9
EXHIBIT A.
10
ELECTROARMS, INC.
Xxxx X. Cover, Pres. 602/529-2344
0000 Xx. Xxxx Xx. #00000
Xxxxxx, XX 00000
December 15, 1995
LICENSE AGREEMENT BETWEEN XXXXX XXXXXX, EESTI Engrg, LLC, POWAY, CA,
LICENSEE & XXXX X. COVER, LICENSOR - under Xxx. No. 5,078,117 (generally
covering the use of compressed gas capsules that are easily discharged &
the gas will propell projectiles, weights, contactors, nets, etc., in a
non-firearm mode of operation).
This Agreement specifically pertains to EESTI's manufacture of Taser-type
cassettes designed to snap onto stun guns giving the stun gun owner the
Taser stand-off range & effectiveness in stopping power over dangerous
criminals.
More specifically this License relates to X.X. Cover's License with Eastex
Co., Xxxx Xxxx, who imports & sells the Thunder Power - and other stun guns
- which will be used in conjunction with the EESTI SGA Cassettes containing
the SPOGC's.
In return for this Exclusive License to EESTI, X.X. Cover will receive an
Earned Royalty from Xxxxx Xxxxxx, EESTI, of $0.25 - or 25(cents) @ for each
SGA Cassette they Make & Sell.
In summary, the Licensor, Xxxx X. Cover, hereby grants an Exclusive License
under Patent #5,078,117 to Xxxxx Xxxxxx, d.b.a. EESTI Engineering, LLC, to
manufacture and sell the Stun Gun/SGA Taser Cassettes as the Exclusive
Licensee.
Signatures below constitute the legal acceptance by the two Parties of the
above Terms & Conditions.
/s/ Xxxxx Xxxxxx 2-19-96 /s/ Xxxx X. Cover 12/15/95
----------------------------- ------------------------------
Xxxxx Xxxxxx, Licensee - Date Xxxx X. Cover, Licensor - Date
11
-----------------------------------------------------------------------------
EXHIBIT B.
12
ELECTROARMS, INC. 619/423-0689
00 Xxxx Xxxx Xxxx, Xxxxxxxx, XX 00000 December 1, 1998
Xxxx X Xxxx, Pres. Subject: License Addendum covering
Bestex Co., Unit B Bestex Sale of a Stun Gun
0000 Xxx Xxxxxxxx Xx. Adaptor/SGA designed for the Thunder
Xxx Xxxxxxx, XX 00000 Power Stun Gun.
ADDENDUM TO THE LICENSE AGREEMENT signed by Xxxx Xxx Park, d.b.a. Bestex Co.,
3/7/90 & Xxxx X. Cover, Licensor, on 2/19/90.
Licensor hereby grants an Exclusive License to distribute and sell the SGA
Taser Cassettes designed to "snap" onto the front of the Bestex Thunder Power
Stun Gun modified to function with the SGA -- which projects the high voltage
electric contactors at an attacker -- such that the user does not receive a
shock to this hand (insulation)
This License is under X.X. Cover's Patent #5,078,117 covering the
Self-Puncturing Compressed Gas Capsule. This technology permits the use of
compressed air to propell the contactors & is therefore not classified as a
Firearm. EESTI, Xxxxx Xxxxxx, Poway, CA will make the SGA under my Patent
License & supply them to Bestex.
The Terms for Bestex's Exclusivity are: 1)$20,000 upfront ($10,000 upon
execution of the License -- 1st week of March, 1996 -- and $10,000 April 1,
1996), 2) Bestex's Minimum Royalty will be $2500/mos starting 4/2/96, and 3)
Bestex will pay X.X. Cover $2 Earned Royalty for each Thunder Power Stun Gun
sold(or any modification or substitution thereof that fits the SGA) and
25(cents) for each SGA Cassette sold.
It is important that Xxxx Xxxx, Xxxxx Xxxxxx & Xxxx Cover work as a team on
this program. There are decisions to be made such as the Packaging of the
Product -- the Thunder Power & (2) SGA cassettes in a box -- sales and
advertising strategies including the name of the Product. "Public Defender" and
ElectroStorm(stop rape & murder) are possibilities. An early meeting such as
the first week in December is suggested. Xxxx Cover will consult as needed
without compensation.
The signatures below constitute the legal acceptance of the two parties of the
above terms & conditions.
/s/ Xxxx Xxx Park, 12/18/95 /s/ Xxxx X. Cover 12/15/95
----------------------------- ----------------------------
Xxxx Xxx Park, Licensee - Date Xxxx X. Cover, Licensor
13
8/31/96
AIR TASER INCORPORATED
Rec'd $15,000 for 2nd Amendment Compensation
/s/ X.X. Cover
--------------
X.X. Cover
14
[SPECIMEN STOCK CERTIFICATE]
[AIR TASER LOGO]
INTELLIGENT SELF DEFENSE
Number Shares
00004 50,000
AIR TASER INCORPORATED
Share Issue Authorized by /s/ illegible /s/ illegible
------------- -------------
President Secretary
THIS CERTIFIES THAT Xxxx X. Cover is the registered holder of Fifty Thousand
(50,000) Shares transferrable only on the books of the Corporation by the
holder hereof in person or by Attorney upon surrender of this Certificate
properly endorsed.
IN WITNESS WHEREOF, the said Corporation has caused this Certificate to be
signed by its duly authorized officers and its Corporate Seal to be Hereunto
affixed
this Seventeenth day of June A.D. 1994
15
[SPECIMEN STOCK CERTIFICATE]
[SEAL]
FOR VALUE RECEIVED, I hereby sell, assign and transfer unto AIR TASER, INC.
____________ Shares represented by the within Certificate, and do hereby
irrevocably constitute and appoint XXXXXXX XXXXX Attorney to transfer the said
Shares on the books of the within named Corporation with full power of
substitution in the premises.
Dated AUGUST 31, 1994
In presence of
/s/ illegible /s/ Xxxx X. Cover
----------------------- -----------------------
Xxxx X. Cover
00 Xxxx Xxxx Xxxx
Xxxxxxxx, XX 00000
NOTICE: THE SIGNATURE OF THIS ASSIGNMENT MUST CORRESPOND WITH THE NAME AS
WRITTEN UPON THE FACE OF THE CERTIFICATE, IN EVERY PARTICULAR, WITHOUT
ALTERATION OR ENLARGEMENT, OR ANY CHANGE WHATEVER.
16
SETTLEMENT AGREEMENT
THIS SETTLEMENT AGREEMENT ["Settlement Agreement"] is made and entered into
this 8/30/96 day of August, 1996, by and between Xxxx X. Cover, Jr. ["XXXX
COVER"] and Xxxxxxxx X. Cover ["VIRGINIA COVER"] and Air Taser, Incorporated
f/k/a ICER Corporation, an Arizona corporation ["AIR TASER"].
RECITALS
A. WHEREAS, AIR TASER, is an Arizona corporation engaged in the business
of manufacturing and selling certain goods and products, including a non-lethal
electronic self-defense device used to temporarily immobilize an attacker ["AIR
TASER DEVICE"].
B. WHEREAS, XXXX COVER, was and is the sole owner and licensor of certain
U.S. patents, including:
a. Patent #4,253,132 [the "132 Patent"] which covers generally the
circuitry by which current from a battery is transformed so that an
electrical charge with which a potential attacker is struck operates
to temporarily immobilize a potential attacker; and
b. Patent #5,078,117 [the "117 Patent"] which covers generally the
non-explosive means of projecting electrically charged darts to
deliver an immobilizing electrical charge to a potential attacker.
C. WHEREAS, VIRGINIA COVER is the spouse of XXXX COVER and may have or
claim certain marital property rights in and to the 132 Patent, the 117 Patent
and other assets which are the subject of this Settlement Agreement.
D. WHEREAS, on or about October 15, 1993, XXXX COVER, as licensor, and AIR
TASER, as licensee, executed a certain written Licensing Agreement ["AIR TASER
LICENSE"].
A true and correct copy of the AIR TASER LICENSE executed by and between
AIR TASER and XXXX COVER is attached hereto as Exhibit "A" and by reference
made a part hereof.
E. WHEREAS, by written agreement executed on or about October 15, 1993, by
and between AIR TASER and XXXX COVER ["EMPLOYMENT AGREEMENT"], XXXX COVER
accepted a position of employment with AIR TASER for a period of one (1) year
upon the terms and conditions set forth therein. XXXX COVER asserts that on or
about October 15, 1993, in accordance with Article 1, paragraph 4, of the
EMPLOYMENT AGREEMENT, he tendered to AIR TASER a copy of a certain patent
license with Electronic Medical Research Laboratories, Inc. d/b/a Tasertron
["TASERTRON"] covering the 132 Patent and granting certain exclusive rights
relative to the U.S. law enforcement market. In or about June, 1994, XXXX COVER
resigned as a full time employee of AIR TASER.
17
A true and correct copy of the EMPLOYMENT AGREEMENT executed by and
between AIR TASER and XXXX COVER is attached hereto as Exhibit "B" and by
reference made a part hereof.
F. WHEREAS, pursuant to Article I, paragraph 7, of the EMPLOYMENT
AGREEMENT, XXXX COVER agreed not to disclose the confidential information of
AIR TASER, including trade secrets, marketing plans, manufacturing know-how,
and financial or other data designated as confidential.
G. WHEREAS, pursuant to Article I, paragraph 3, of the EMPLOYMENT
AGREEMENT, XXXX COVER agreed to license AIR TASER to utilize the "Taser"
trademark in conjunction with product marketing and other business functions and
further agreed not to license the use of the "Taser" trademark to any company
not licensed for such use prior to October 15, 1993.
H. WHEREAS, pursuant to Article I, paragraph 5, of the EMPLOYMENT
AGREEMENT, XXXX COVER agreed that all technical designs and intellectual
property generated during his employment with AIR TASER would be
work-made-for-hire, would be assigned to AIR TASER and would be the exclusive
property of AIR TASER.
I. WHEREAS, in April, 1995, after receiving a letter dated March 29,
1995 from AIR TASER's attorneys, Xxxxx & Xxxx, alleging certain violations of
the AIR TASER LICENSE and threatening legal action, XXXX COVER and VIRGINIA
COVER filed suit in the Superior Court of the State of Arizona in and for the
County of Maricopa, captioned Cover, et al. v. Icer Corporation n/k/a Air
Taser, Incorporated, case number CV95-06851 [the "ARIZONA LITIGATION"], seeking
a declaratory judgment holding that the AIR TASER LICENSE does not include the
right to sell the AIR TASER DEVICE to law enforcement agencies together with
an injunctive Order prohibiting AIR TASER from selling or attempting to sell
the AIR TASER DEVICE to law enforcement agencies.
J. WHEREAS, AIR TASER vigorously denies any and all liability with
respect to the allegations of fact and the claims asserted in the complaint
filed by XXXX COVER and VIRGINIA COVER in the ARIZONA LITIGATION.
K. WHEREAS, in October, 1995, AIR TASER filed its Answer and Counterclaim
in the ARIZONA LITIGATION wherein its denied, inter alia, that the AIR TASER
LICENSE restricts the sale of the AIR TASER DEVICE to any particular market or
user and further alleged, by way of counterclaim, various causes of action
including breach of contract, breach of fiduciary duty and fraud for which it
requested both money damages and injunctive and other equitable relief.
-2-
18
L. WHEREAS, XXXX COVER and VIRGINIA COVER vigorously deny any and all
liability with respect to the allegations and the claims asserted in the
counterclaim filed by AIR TASER in the ARIZONA LITIGATION. XXXX COVER
affirmatively asserts that on or prior to October 15, 1993, he disclosed the
terms of the TASERTRON license to AIR TASER, including the terms purporting to
grant exclusivity as to the use of the 132 Patent within certain markets and
geographical boundaries.
M. WHEREAS, in February, 1995, TASERTRON filed an action against AIR
TASER in the Federal District Court for the Central District of California
captioned Electronic Medical Research Laboratories, Inc. d/b/a/ Tasertron v. Air
Taser, Inc., case number ED CV 95-53 RT (JRX) ["CALIFORNIA LITIGATION"]
asserting an exclusive right to market devices utilizing the technology covered
by the 132 Patent within certain markets and geographical boundaries. In
September, 1995 the CALIFORNIA LITIGATION was settled and AIR TASER agreed,
inter alia, to refrain from selling the AIR TASER DEVICE to U.S. law enforcement
agencies for a specified period of time.
N. WHEREAS, all parties hereto desire to fully settle and compromise all
matters in controversy heretofore existing between them.
O. WHEREAS, all parties have examined the benefits to be obtained under
this Settlement Agreement and have considered the costs, risks and delays
associated with the continued prosecution of the claims asserted in the ARIZONA
LITIGATION. Each of the parties, having full knowledge of the contents hereof
and after obtaining the advice of counsel, believes that, in consideration of
all the circumstances and after significant investigation and settlement
negotiations between and among the parties, the settlement embodied in this
Settlement Agreement is fair, reasonable and in the best interests of all
parties concerned.
NOW THEREFORE, in consideration of the foregoing Recitals, the
representations, warranties, covenants and agreements contained in this
Settlement Agreement, the sum of One Dollar ($1.00) each to the other in hand
paid and other good and valuable consideration, the receipt and sufficiency of
which are hereby acknowledged, the parties hereto represent, warrant, covenant
and agree as follows:
1. The foregoing Recitals and all Exhibits referred to herein and
attached hereto, are incorporated in this Settlement Agreement as if set forth
in full in the body hereof.
2. It is hereby stipulated and agreed that, subject only to the terms of
that certain Stipulation of Settlement ("STIPULATION") executed by and between
AIR TASER and Electronic Medical Research Laboratories, Inc. d/b/a/ Tasertron in
the CALIFORNIA LITIGATION, in its present form or as it may hereafter be
amended, the AIR TASER
-3-
19
LICENSE authorizing the manufacture, use and sale of devices covered by the 132
Patent and the 117 Patent is unrestricted as to any particular market, user,
geographical area, dimension or design. However, the AIR TASER LICENSE shall
not encompass applications of the technology covered by the 117 Patent other
than in conjunction with electronic devices. A copy of the STIPULATION is
attached hereto as Exhibit "C".
3. It is hereby stipulated and agreed that paragraph 6.2 of the AIR TASER
LICENSE is modified so that if, an any month, the minimum royalty exceeds the
earned royalty, that excess shall be applicable as a credit to AIR TASER in the
next calendar month in the following manner: if the earned royalty for the next
month exceeds the minimum royalty for that month, then the excess shall apply
to reduce the earned royalty dollar for dollar until that excess for the
previous month is used up. However, if all the excess is not used up in that
next month, then it shall no longer operate as a credit in the future. In no
event shall AIR TASER be thereby relieved of the obligation to pay the agreed
minimum royalty in any month.
4. AIR TASER agrees that the negative balance in XXXX COVER's cumulative
royalty account existing as of the date of execution of this Settlement
Agreement, which negative balance constitutes a credit to AIR TASER against
future earned royalties, is hereby eliminated.
5. It is hereby stipulated and agreed that the period of exclusivity
relative to devices utilizing the technology covered by the 117 Patent and
meeting certain specified characteristics as provided in paragraph 4.2 of the
AIR TASER LICENSE has expired and that, subject to the provisions of paragraph
6 of this Settlement Agreement, XXXX COVER is free to license others to utilize
the technology covered by the 117 Patent on a non-exclusive basis.
6. XXXX COVER hereby agrees that he shall not on his own account, nor
shall he authorize in any future patent licenses he may grant to other
individuals or other entities, manufacture, use or sell or license for
manufacture, use or sale (a) any launchers which are compatible with the AIR
TASER cartridge model number 34200 or (b) cartridges which are compatible with
the AIR TASER power handle model number 34100. "Compatible" for these purposes
means a device which, without modification by the user, will operate with the
AIR TASER components [model numbers 34100 and 34200] to deliver an electric
shock to a target. AIR TASER will not knowingly and intentionally manufacture or
sell any devices [excluding model numbers 34100 and 34200] which are compatible
with any launchers or cartridges manufactured by other existing patent licenses
of XXXX COVER. In any future patent licenses which XXXX COVER may grant, and in
any amendments to any existing licenses which he may in the future enter into,
he shall include the following language:
-4-
20
"This license does not allow the licensee to manufacture, use or sell
(a) any launchers which are compatible with the AIR TASER cartridge
model number 34200 or (b) any cartridges which are compatible with the
AIR TASER power handle model number 34100. "Compatible for these
purposes means a device which, without modification by the user, will
operate with the AIR TASER components [model numbers 34100 and 34200]
to deliver an electric shock to a target. Furthermore, licensee hereby
acknowledges that it has had an opportunity to inspect or is otherwise
familiar with the AIR TASER air cartridge and the AIR TASER power
handle prior to execution of the license.
In order to facilitate XXXX COVER's compliance with this paragraph,
AIR TASER shall within ten (10) days following execution and delivery of this
Settlement Agreement, deliver three (3) inoperative power handles [model 34100]
and three (3) inoperative cartridges [model 34200] to XXXX COVER.
7. It is hereby stipulated and agreed that the last sentence of paragraph
6.3 of the AIR TASER LICENSE shall be deleted and stricken from the AIR TASER
LICENSE, and the following sentence shall be inserted in its place:
"If the DEFAULT is not cured by payment of this MINIMUM ROYALTY by
cashier's check or money order on or before 5:00 P.M. local Arizona
time of the tenth (10th) day following written notice by Licensor to
Licensee of the facts constituting the alleged default, this licensing
agreement shall terminate automatically without further notice."
8. It is hereby stipulated and agreed that the last sentence of
paragraph 6.4 of the AIR TASER LICENSE shall be deleted and stricken from the
AIR TASER LICENSE, and the following sentence shall be inserted in its place:
"If the DEFAULT is not cured by payment of this EARNED ROYALTY by
cashier's check or money order on or before 5:00 P.M. local Arizona
time of the tenth (10th) day following written notice by Licensor to
Licensee of the facts constituting the alleged default, this licensing
agreement shall terminate automatically without further notice."
-5-
21
9. AIR TASER does not know of any reason why the 132 Patent or the 117
Patent should not continue in existence until the dates set forth in the AIR
TASER LICENSE. AIR TASER will not take, nor will it cause anyone else to take,
any action which would impair the validity of either patent and, if AIR TASER
shall in the future have any concern as to the early termination of either
patent, it will notify XXXX COVER of the basis for its concern so that he might
take such action as he deems necessary to avoid such early termination.
10. It is hereby stipulated and agreed that upon expiration of the 132
Patent, AIR TASER's obligation to pay XXXX COVER a $2.00 per unit earned
royalty for each unit which utilizes the power generation device and electric
wave form described in the 132 Patent shall be terminated, notwithstanding AIR
TASER's continued use of the technology covered by the 132 Patent.
11. It is hereby stipulated and agreed that upon expiration of the 117
Patent, AIR TASER's obligation to pay XXXX COVER a $0.25 per unit earned
royalty for each device which utilizes compressed gasses to launch electrical
contactors from the power generator shall be terminated, notwithstanding AIR
TASER's continued use of the technology covered by the 117 Patent.
12. It is hereby stipulated and agreed that upon expiration of the 117
Patent, AIR TASER's obligation to make any further minimum royalty payments or
earned royalty payments, as those terms are used in paragraphs 6.1 and 6.2 of
the AIR TASER LICENSE, to XXXX COVER shall be terminated, notwithstanding AIR
TASER's continued use of the technology covered by either or both the 117
Patent and/or the 132 Patent.
13. XXXX COVER hereby represents and warrants that he is the sole owner
of the "Taser" registered trademark, Registration No. 1,235,685, and that of
those licensees of the "Taser" trademark whose licenses came into existence on
or prior to October 15, 1993, AIR TASER and Electronic Medical Research
Laboratories, Inc. d/b/a Tasertron are the only licensees currently using or
authorized to use the "Taser" trademark. XXXX COVER hereby reaffirms his prior
agreement, as originally set forth in Article I, paragraph 3, of the EMPLOYMENT
AGREEMENT, that AIR TASER, as licensee, is authorized to utilize the "Taser"
trademark in conjunction with product marketing and other business functions
and that XXXX COVER shall not license the use of the "Taser" trademark to any
individual or entity not licensed for such use prior to October 15, 1993. In
order to prevent abandonment of the "Taser" trademark, XXXX COVER hereby agrees
that AIR TASER shall have the right, jointly with XXXX COVER, to police and
protect the use of the "Taser" trademark by others, in his name or in the name
of AIR TASER, in a reasonable manner to maintain the quality of the xxxx and to
prevent the unauthorized use of the xxxx by third parties. However, other
patent licensees of XXXX COVER may, with his prior
-6-
22
written consent, refer to the "Taser" device for comparative purposes only
[patent licensees not expressly licensed to use the "Taser" trademark on or
prior to October 15, 1993 may not claim that their device is a "Taser" or
incorporate the "Taser" trademark in their product name], provided that the
word "Taser" is designated as a registered trademark, that the patent licensee
includes a disclaimer that said patent licensee is not licensee of the "Taser"
trademark and that said disclaimer appears in the same context as the word
"Taser" in the same size typeface as the word "Taser", but in no event may the
word "Taser" appear in a typeface larger than 12 points. XXXX COVER further
represents and warrants that attached hereto as Group Exhibit "D" is a full and
complete list of the names and current addresses of all licensees of the
"Taser" trademark together with the copies of the subject licenses and all
amendments thereto.
14. XXXX COVER does hereby sell, transfer and assign to AIR TASER all
shares of AIR TASER stock acquired by him at any time [i.e., 50,000 shares]
free and clear of all liens, claims and encumbrances. XXXX COVER agrees that
contemporaneously with the execution and delivery of this Settlement Agreement
he shall surrender said stock, properly endorsed, to AIR TASER.
15. XXXX COVER hereby represents and warrants that Exhibit "E" attached
hereto is a full and complete list of the names and current addresses of all
past or present licensees of the 117 Patent and the 132 Patent together with
copies of the subject licenses and any and all amendments thereto.
16. XXXX COVER hereby represents and warrants that, except for the
ARIZONA LITIGATION, there are no law suits pending or threatened and there are
no existing or potential causes of action involving the 117 Patent, the 132
Patent and/or the "Taser" trademark.
17. XXXX COVER hereby reaffirms his prior agreement, as originally set
forth in Article I, paragraph 5, of the EMPLOYMENT AGREEMENT that all technical
designs and intellectual property generated by XXXX COVER during his work with
ATR TASER was work-made-for-hire, was, or upon request, will be assigned to AIR
TASER and is the exclusive property of AIR TASER. XXXX COVER further agrees to
execute all documents and perform all acts necessary to enable AIR TASER to
acquire or perfect any and all rights, titles, patents, copyrights, interests
and other protection which may be available with regard to such technical
designs and intellectual properties. XXXX COVER agrees that contemporaneously
with the execution and delivery of this Settlement Agreement he shall execute
and deliver to AIR TASER the Declaration for Patent Application with Power of
Attorney and the Assignment attached hereto as Exhibits "F" and "G",
respectively. AIR TASER warrants and agrees that the Declaration for Patent,
Exhibit "F", covers both a method of manufacturing compressed fluid containers
and a
-7-
23
double walled compressed gas cylinder, and that patent, should it be granted,
would not, to the best of its knowledge, replace or conflict with the 117
Patent, and even if the patent should be granted, it would not allow AIR TASER
to utilize the technology covered by the 117 patent without paying XXXX COVER
the royalties required by the AIR TASER LICENSE. Attached hereto as Exhibit "H"
is a schedule of intellectual property generated by XXXX COVER during his work
with AIR TASER which the parties agree was either work-made-for-hire or
assigned to AIR TASER and which is the exclusive property of AIR TASER.
18. XXXX COVER hereby reaffirms his continuing contractual obligation not
to disclose confidential information of AIR TASER, as originally set forth in
Article I, paragraph 7, of the EMPLOYMENT AGREEMENT. The term "confidential
information" shall mean any information or material which is proprietary to AIR
TASER, whether owned or developed by AIR TASER, which is not generally known
other than by AIR TASER, and which XXXX COVER may have obtained through any
direct or indirect contact with AIR TASER. Confidential information includes,
without limitation, business records and plans, financial statements and
projections, marketing plans, manufacturing know-how, pricing structure, costs,
appraisals, customer lists, the identity of suppliers of AIR TASER whose
identities became known to XXXX COVER as a result of his employment by AIR
TASER and other proprietary information which is designated as confidential.
The parties hereto acknowledge and agree that damages at law may not
be a measurable or adequate remedy for a breach of XXXX COVER's continuing
obligation not to disclose the confidential information of AIR TASER, and,
accordingly, consent to the entry by any court of competent jurisdiction in
Arizona, or, if jurisdiction is not appropriate in Arizona, such other court of
competent jurisdiction, of an order enjoining the violation of such agreement
should the requirements for an injunction be met and further agree that the
entry of such order would be an appropriate remedy for the breach of this
obligation.
19. XXXX COVER and AIR TASER agree that contemporaneously with the
execution and delivery of this Settlement Agreement, they shall execute and
exchange Releases in the form attached hereto as Exhibits "I" and "J".
20. Except as otherwise provided herein and notwithstanding the execution
of the Releases executed and exchanged pursuant to paragraph 19 hereof, the
terms of the AIR TASER LICENSE, as modified by this Settlement Agreement,
including without limitation the terms governing the duration of the AIR TASER
LICENSE, the specified minimum royalty and the per unit earned royalties
applicable to both the 117 Patent and the 132 Patent, shall hereafter remain in
full force and effect.
-8-
24
21. Within five (5) business days following the execution of this
Settlement Agreement by all parties hereto, XXXX COVER and VIRGINIA COVER, by
and through their attorney of record, shall prepare and file with the Court
wherein the ARIZONA LITIGATION is now pending an appropriate Motion and Agreed
Order providing for the dismissal of the ARIZONA LITIGATION on its merits, with
prejudice and without costs or attorneys' fees, all matters in controversy
having been fully settled, compromised and adjourned.
22. VIRGINIA COVER hereby consents to each and every term and provision
of the Settlement Agreement as set forth herein and hereby sells, transfers and
assigns to AIR TASER any right, title and interest she may have in or to the
property hereby transferred by XXXX COVER to AIR TASER.
23. The parties hereto acknowledge that it is their intent to consummate
this Settlement Agreement and agree to execute all documents and to perform all
acts reasonably necessary to effectuate and implement all terms and conditions
of this Settlement Agreement.
24. This Settlement Agreement shall be preserved as confidential by the
parties hereto. The parties hereto, and each of them, agree (i) to take all
precautions necessary to safeguard the information contained in this Settlement
Agreement and any and all information furnished in connection herewith from
disclosure to any person or entity other than employees, officers, directors and
agents (including legal counsel and financial advisors) and, in addition, those
individuals who otherwise normally have access to information of such nature
under the parties' established confidentiality procedures; (ii) not to use this
Settlement Agreement or any information contained herein or furnished in
connection herewith for any purpose other than to resolve the issues and
controversies as may exist between the parties. The parties hereto, and each of
them, further agree that if any of them are requested or required by law to
disclose the contents of this Settlement Agreement or any information contained
herein or furnished in connection herewith, the party so requested will provide
all other parties with prompt written notice of the request so that any party
may seek an appropriate protective order or consent to the waiver of compliance
with this confidentiality provision of the Settlement Agreement. If in the
absence of a protective order or such waiver, any party is, nonetheless,
compelled to disclose any or the contents of this Settlement Agreement to a
Court or other tribunal under circumstances where such party would be liable
for contempt or other penalty if disclosure is not made, said party shall
disclose to such Court or other tribunal only that limited portion of the
information which is legally required to be disclosed.
-9-
25
25. Unless expressly provided otherwise in this Settlement Agreement, any
notice, request, demand or other communication required to be given under this
Settlement Agreement or any document or instrument executed and delivered
pursuant to this Settlement Agreement shall be in writing, shall be
deemed to be given or delivered (a) on the date of personal or facsimile
delivery of the notice, request, demand or other communication at or before 2:00
p.m. local Arizona time, (b) on the second business day after the day of mailing
of such notice, request, demand or other communication by United States
Registered Mail or United States Certified Mail, postage prepaid, or (c) on the
next business day after mailing of such notice, request, demand or other
communication by express next-day courier, freight charges prepaid, to the
parties (including any person or entity designated for receipt of a photocopy
thereof) at the following addresses or at such other address as any of the
parties may hereafter specify in the aforementioned manner:
if to XXXX COVER: Xxxx X. Cover, Jr.
0000 Xxxxx Xxxx Xxxx
Xxx. 00000
Xxxxxx, XX 00000
(Facsimile: )
with a copy to: Xxxx X. Xxxxxx, Esq.
Xxxxxx & Xxxxx, P.C.
0000 Xxxxx Xxxxxxx Xxxxxx
Xxxxx 000
Xxxxxxx, XX 00000
(Facsimile: 602-263-6005)
if to VIRGINIA COVER: Xxxxxxxx X. Cover
00 Xxxx Xxxx Xxxx
Xxxxxxxx, XX 00000
(Facsimile: )
with a copy to: Xxxx X. Xxxxxx, Esq.
Xxxxxx & Xxxxx, P.C.
0000 Xxxxx Xxxxxxx Xxxxxx
Xxxxx 000
Xxxxxxx, XX 00000
(Facsimile: 602-263-6005)
-10-
26
if to AIR TASER: Xxxxxxx X. Xxxxx
Air Taser, Inc.
0000 X. Xxxxx Xxxx, Xxxxx 0
Xxxxxxxxxx, XX 00000
(Facsimile: 602-991-0791)
with a copy to: Xxxx X. Xxxxxxx, Esq.
Kamenear, Kadison & Xxxxxxxx
00 Xxxxx Xxxxxx Xxxxx
Xxxxx 0000
Xxxxxxx, XX 00000
(Facsimile: 312-332-6163)
26. This Settlement Agreement embodies the entire agreement between the
parties and supersedes any prior agreements or understanding between them in
connection with the subject matter hereof and the transactions contemplated
hereby. There are no oral or parol agreements, representations, or inducements
existing between the parties relating to this transaction which are not
expressly set forth herein and covered hereby. All terms of this Settlement
Agreement are contractual and not mere recitals and shall be construed as if
drafted by all parties hereto. The terms of this Settlement Agreement are and
shall be binding upon each of the parties hereto, their agents, employees
successors and assigns, and upon all other persons claiming any interest in the
subject matter hereof through any of the parties hereto.
27. To the extent that this Settlement Agreement contradicts, is
inconsistent or in conflict with any prior agreements between or among any or
all of the parties, this Settlement Agreement supersedes any conflicting or
inconsistent provision of any prior agreement and is controlling to the extent
necessary to resolve such conflict or inconsistency. Any and all provisions in
a prior agreement not inconsistent with this Settlement Agreement remain valid
and binding.
28. This Settlement Agreement may not be amended, changed, or modified
except by written instrument executed by all parties to this Settlement
Agreement.
29. The place of business of AIR TASER, the place of negotiation,
execution and delivery of this Settlement Agreement and the other
documents and instruments to be executed and delivered pursuant to this
Settlement Agreement, and the place of performance under this Settlement
Agreement being the State of Arizona, this Settlement Agreement shall be
construed and enforced according to the laws of the State of Arizona.
-11-
27
30. This Settlement Agreement may be executed in any number of
counterparts, each of which shall be deemed an original, but all of which
together shall constitute but one instrument.
IN WITNESS WHEREOF, the parties have caused this Settlement Agreement to
be duly executed as of the day and year first above written.
AIR TASER, INCORPORATED
By: /s/ Xxxxxxx Xxxxx /s/ Xxxx X. Cover, Jr.
------------------------- ---------------------------
Title: President Xxxx X. Cover, Jr.
----------------------
/s/ Xxxxxxxx X. Cover
---------------------------
Xxxxxxxx X. Cover
-12-
28
LICENSING AGREEMENT
1. CONSIDERATION; EFFECTIVE DATE
1.1 The effective date of this agreement shall be Oct. 15, 1993.
2. PARTIES
2.1 Xxxx X. Cover is an individual with business located at Xxx 000, 0000
Xxxxxxx Xxxxx, Xxxxxx, Xxxxxxx 00000 (LICENSOR)
2.2 ICER Corporation is an Arizona Corporation engaged in the development
of non lethal electronic weapons for sale to the general consumer market
(LICENSEE).
3. BACKGROUND
3.1 Licensor represents and warrants that he owns several patent rights,
both domestic and foreign as listed on Exhibit "A" though not in every
country of the world, and specifically U.S. Patent Number 4,254,132 and
5,078,117, (the Licensed Patents) concerning a power supply and ballistics
launching mechanism for weapons or other devices utilizing electricity for
immobilization purposes.
3.2 Licensor is not aware of any ownership of another of inventions or
patent rights or trade secret or know-how rights in conflict with his own;
and Licensor believes that he possesses such right, title and interest in
and to the electronic immobilization devices and equipment useful therein
as is necessary and appropriate to the terms of this agreement.
3.3 Licensee is a company seeking to develop such technology for
manufacture and marketing an alternative non lethal self defense device to
firearms.
3.4 Any other concepts, advanced technologies or other patents Licensor now
possesses or might obtain in the future are specifically excluded from this
agreement. HOWEVER, SUCH TECHNOLOGIES MAY BE COVERED IN SEPARATE
ARRANGEMENTS SPECIFYING CONTRACT AND SALARIED WORK.
4. LICENSE
29
ICER CORPORATION COVER AGREEMENT
4.1 Licensor hereby grants Licensee a non exclusive license for use of
patent number 4,254,132 and the electric wave form and power generator
described therein. Under said licensed patent to manufacture, use and sell
devices, with and without launching mechanisms covered by patent number
4,254,132.
4.2. LICENSOR HEREBY GRANTS LICENSEE LICENSE FOR PATENT 5,078,117. LICENSOR
IS LICENSED UNDER SAID PATENT TO MANUFACTURE, USE AND SELL DEVICES COVERED
BY PATENT 5,078,117. THIS LICENSE WILL BE EXCLUSIVE FOR DEVICES WHICH MEET
ALL OF THE FOLLOWING CHARACTERISTICS:
i) ELECTRONIC WEAPONRY DESIGNED TO IMMOBILIZE
ii) WEAPON AS IN i) WHEREIN THE GREATEST DIMENSION OF THE WEAPON IS
OF LESS THAN FOURTEEN INCHES.
iii) A WEAPON WHICH IS DESIGNED TO BE NON LETHAL
iv) A WEAPON DESIGNED FOR USE AGAINST HUMANS
THIS EXCLUSIVITY BINDS LICENSEE TO ENSURE THAT ANY FURTHER LICENSING
OF PATENT 5,078,117 DESCRIBES CLEARLY THAT THE LICENSING OF PATENT
5,078,117 DESCRIBES CLEARLY THAT THE LICENSE MAY NOT BE USED FOR
MANUFACTURE OF DEVICES WHICH MEET THOSE FOUR CHARACTERISTICS. THIS
EXCLUSIVITY WILL BE BINDING FOR TWENTY FOUR MONTHS (24). AFTER TWENTY FOUR
MONTHS, THIS EXCLUSIVITY CLAUSE WILL REMAIN IN EFFECT IF THE TOTAL EARNED
ROYALTIES PAID BY LICENSEE TO LICENSOR EXCEEDS $100,000 PER YEAR, USING
MONTHS 12-24 AS THE FIRST YEAR FOR SUCH CALCULATION. SHOULD THE EARNED
ROYALTIES FALL BELOW $100,000 PER YEAR, LICENSOR WILL BE FREE TO LICENSE
PATENT 5,078,117 FOR SIMILAR USE.
4.3. No party shall enter into any contracts or make any warranties on
behalf of the other party.
4.4. Licensee shall not negotiate sub license or assign this license unless
specifically authorized in writing by Licensor. Bona fide sales by Licensee
to bona fide third parties for resale are not sub licensing so long as
these sales are not in violation of Paragraph 6.12 below.
5. TERM OF LICENSE
5.1. The license will be for the period of validity of patent 4,254,132 on
devices utilizing the technology described therein
30
ICER CORPORATION COVER AGREEMENT
and for the PERIOD OF VALIDITY of patent 5,078,117 for mechanisms
utilizing the technology described therein.
5.2 Licensee's obligation to pay royalties, as set forth in
Paragraph 6, runs in favor of Licensor's heirs, successors and
assigns.
6. ROYALTIES
6.1 From Oct. 15, 1993 until the expiration of the above described
patents, unless Licensee ceases to make, use, or sell devices covered by
the Licensed Patents, Licensee agrees to pay Licensor a MINIMUM ROYALTY of
Two thousand five hundred and no/100 Dollars ($2,500) per month payable on
the 15th and on the 15th of each and every month thereafter during the
term of this license. Payment of the MINIMUM ROYALTY shall be delinquent
if not paid within 5 days after the due date.
6.2 LICENSEE ALSO AGREES TO PAY AN EARNED ROYALTY TO BE COMPUTED MONTHLY
AND, AFTER REDUCTION BY THE AMOUNT PAID IN CUMULATIVE MINIMUM ROYALTIES
ABOVE CUMULATIVE EARNED ROYALTIES, SAID EARNED ROYALTIES SHALL BE EQUAL TO
TWO DOLLARS PER UNIT ($2.00) FOR EACH UNIT WHICH UTILIZES THE POWER
GENERATION DEVICE AND ELECTRIC WAVE FORM DESCRIBED IN PATENT 4,254,132 AND
$0.25 PER UNIT FOR EACH DEVICE WHICH UTILIZES COMPRESSED GASSES TO LAUNCH
ELECTRICAL CONTACTORS FROM THE POWER GENERATOR. THIS $0.25 EARNED
ROYALTY SHALL REMAIN IN EFFECT FOR THE LIFE OF PATENT 4,254,132 IF IT DOES
NOT UTILIZE THE TECHNOLOGY DESCRIBED IN PATENT NUMBER 5,078,117. IF IT
DOES UTILIZE THE TECHNOLOGY DESCRIBED IN PATENT NUMBER 5,078,117, THEN THE
EARNED ROYALTY SHALL REMAIN IN EFFECT FOR THE LIFE OF SAID PATENT
5,078,117. AN EARNED ROYALTY OF $0.10 WILL BE PAID FOR "PRACTICE
CASSETTES" WHICH UTILIZE THE TECHNOLOGY IN PATENT 5,078,117, WHEREIN
"PRACTICE CASSETTES" ARE DEFINED AS DEVICES WHICH SIMULATE THE ACTION OF
PROPELLING ELECTRICAL CONTACTORS TO A TARGET BUT WHICH ARE
NON-FUNCTIONAL--I.E. ARE NOT RELIABLE CONTACTORS FOR USE IN COMBAT
SITUATIONS.
6.3 Licensee's MINIMUM ROYALTY payment is due on the 15th of each month.
MINIMUM ROYALTY payments are past due five days thereafter. If MINIMUM
ROYALTY payments are not made within five days of the due date, then a
DEFAULT of this agreement occurs automatically and without notice.
Licensee has
31
ICER CORPORATION COVER AGREEMENT
payment with a cashier's check or money order for the full amount of the
MINIMUM ROYALTY due. If the DEFAULT is not cured by payment of this MINIMUM
ROYALTY by cashier's check or money order by 5:00 P.M. on the tenth day after
which it is due, this licensing agreement is automatically terminated without
notice.
6.4. Licensee's EARNED ROYALTY payment is due on the fifteenth day of the month
following the month in which the REVENUES FROM SALES WERE RECEIVED. EARNED
ROYALTY payments are past due and delinquent if not paid by 5:00 P.M. on the
twentieth day of SAID MONTH. If EARNED ROYALTY payments are not made by the
twentieth of the month, then a DEFAULT of this agreement occurs automatically
and without notice. Licensee has until the thirtieth of the month to cure the
DEFAULT by payment with a cashier's check or money order for the full amount of
the EARNED ROYALTY due. If the DEFAULT is not cured by payment of this EARNED
ROYALTY by cashier's check or money order by 5:00 P.M. on the thirtieth day of
the month in which it is due, this licensing agreement is automatically
terminated without notice.
6.5. Royalties are payable by Licensee to Licensor at the address of the
Licensor.
6.6. Royalties are payable in U.S. Dollars
6.7. Accompanying each EARNED ROYALTY payment, Licensee will provide to Licensor
the accounting data on the sales of the licensed devices, including any daily
summaries and the monthly summary from which the gross sales figures for the
month are determined.
6.8. Licensee will keep books, accounts, and records that reflect all revenues
and expenditures incurred in connection with the operation of its business. The
books, accounts, and records shall be maintained at the regular place of
business of Licensee. Licensee, during regular business hours, shall make the
books, accounts, and records required to be maintained herein available to
Licensor and/or his designated legal representative for examination and audit by
appointment upon reasonable request and during normal business hours. Licensor
agrees to pay for said examination and audit, however, if said examination and
audit reveals a discrepancy of more than 5% of reported figures, Licensee shall
pay for an examination and audit
32
ICR CORPORATION COVER AGREEMENT
6.9. Within sixty days after the end of each calendar year, Licensee
shall prepare and deliver to Licensor a detailed statement of sales during
the calendar year that result from the operations of Licensee's business.
6.10. Licensor agrees that all such information shall be held by its
legal representatives, agents, trustees, attorneys, and accountants in
confidence.
6.11. Licensee will xxxx each of the subject devices with the following
notice: "Licensed under U.S. Patent No. 4,253,132" Or: "Licensed under U.S.
Patent No. 5,078,117" Or both.
6.12. DELETED.
7. INFRINGEMENT OF LICENSOR's PATENTS
7.1. In the event that any party shall become aware of any perceived
infringement or any appropriation of Licensor's patents, trade secrets, or
know how rights in the electronic immobilization devices or equipment,
products or materials useful therein, the party shall give notice thereof
to the other party hereto.
7.2. Licensee agrees to cooperate with any lawful efforts that
Licensor may undertake to seek legal remedies for any such infringements or
misappropriations.
8. INDEMNITIES FOR MALFEANCE, LIABILITY FOR PERSONAL INJURY OR PROPERTY
DAMAGE
8.1. The License herein granted to Licensee is primarily in the
nature of a sharing of information and a covenant not to xxx for
infringements of the Licensor's rights and is not in the nature of a
specification of activities required of the Licensee or of equipment or
process of details required to be used by the Licensee.
8.2. The manufacture, use, and sale of Licensee's products shall be
the sole responsibility of Licensee and/or its agents.
8.3. Accordingly, Licensor shall not be liable for any personal injury
or property damage resulting from the design, construction, or use of the
licensed technology or of the equipment or products used in connection with
the technology, if such injury or damage arises from the activities of
Licensee.
33
ICER CORPORATION COVER AGREEMENT
8.4 In no event shall Licensor be liable for any direct, special,
incidental, or consequential damages, or any damages whatsoever, whether in
an action for contract, negligence, or other tortious action arising out
of, or in connection with, the use of any of the products covered by this
license.
8.5 Licensee shall protect, save, indemnify, and hold Licensor harmless
from all claims, demands, charges, or litigation arising out of the making,
using, or selling of the merchandise and devices produced and sold by
Licensee and arising, directly or indirectly, out of, or by reason of, any
business activities of Licensee. Licensee shall reimburse Licensor for all
loss, damage, or expense, including reasonable attorney's fees (should such
a creature exist), which he may suffer or incur, directly or indirectly, by
reason of any such claims, demands, charges, or litigation. This indemnity
shall extend to and include any claims for personal injuries or damage
caused to persons using the merchandise or devices made or sold by
Licensee.
9. CONTROLLING LAWS
9.1 All questions relating to the validity, interpretation, performance,
or enforcement of this agreement, whether by arbitration or otherwise,
shall be determined in a court with the laws applicable to the State of
Arizona, U.S.A.
10. BINDING EFFECT
10.1 Each and every provision on this license shall bind and shall inure to
the benefit of the parties hereto and their legal representatives.
10.2 The term "legal representatives" means in addition to executors and
administrators, every person, partnership, corporation, or association
succeeding to the interest or to any part of the interest in or to this
license or in the subject matter of this license, of either Licensor or
Licensee, whether such succession results from the act of a party interest,
occurs by operation of law, or is the effect of the operation of the law
together with the act of such a party. Each and every covenant, agreement,
and condition of this agreement to be performed by the Licensee shall be
binding upon all successors in the interest to Licensee.
11. NOTICES
34
ICER CORPORATION COVER AGREEMENT
11.1. All notices required herein shall be in writing.
11.2. Written notices may be delivered personally to the president of
the subject party or to the officer or person specified below.
11.3. Written notices shall be deemed to have been effective three days
following the date of mailing by certified mail, postage prepaid, return
receipt requested, addressed to Xxxx X. Cover, Licensor, as follows:
XXX 000
0000 Xxxxxxx Xx.
Xxxxxx, Xxxxxxx 00000
Licensee addressed to:
0000 Xxxx Xxxxxx Xxxx Xxxx
Xxxxxxxxxx, Xxxxxxx 00000
11.4 Each party shall have the right to change the effective address
for a notice by a notice in writing directed to the other party above.
12. ENTIRE AGREEMENT; AMENDMENTS; HEADINGS
12.1 This agreement together with its appendices constitutes the
entire agreement between the parties REGARDING LICENSING OF TECHNOLOGY, and
SUPERSEDES any prior communications ON THE SUBJECT whether written or oral.
12.2 This agreement may be amended or modified only by an instrument
in writing, signed by duly constituted officers of both parties.
12.3 No waiver, no matter how long continuing or how many times
extended, shall be construed as a permanent waiver or as an amendment to
this instrument.
12.4 The marginal headings herein are for purposes of convenient
reference only and shall not be used to construe or modify the terms
written in the text of this instrument.
13. FAILURE TO PERFORM
35
ICER CORPORATION COVER AGREEMENT
13.1. Licensee, as well as its successors in interest and or assigns, agrees
that failure to perform in accordance with the terms of this license,
terminates this license and any manufactures, use, or sale of devices covered
by the Licensed Patents, with or without launching mechanisms, thereafter is
without license.
AGREED,
By: /s/ Xxxxxxx Xxxxx By: /s/ Xxxx X. Cover
----------------------- -----------------------
Xxxxxxx Xxxxx Xxxx X. Cover
For ICER CORPORATION
Dated: 10/15/93
--------------------
CORPORATE SEAL
[SEAL]
