EXHIBIT 10.3
------------
Design and Consulting Agreement
This Agreement, effective January 1, 1993 is by and between LexaLite
International Corporation, a Delaware corporation, of X.X. 00, Xxxxxxxxxx,
Xxxxxxxx 00000, hereinafter "LexaLite" and Business Activities Corporation, a
Michigan corporation, of Xxxx Xxxxxx Xxx 000, Xxxxxxxxxx, Xxxxxxxx 00000,
hereinafter "BAC".
WHEREAS LexaLite has a need for new product ideas and designs both in lighting
and in other markets and also for optical design services relating to its
lighting products, and for consulting services in research and development and,
WHEREAS BAC has outstanding optical design capabilities as confirmed by recent
new product introductions by LexaLite and also has knowledge of non-lighting
product research and development including, but not limited to, its own research
of a certain marine product of high potential but at high risk,
NOW THEREFORE, LexaLite and BAC do enter into this Design and Consulting
Agreement and, further, do agree as follows:
BAC shall increase Product development, both in lighting and in other
markets, for the exclusive benefit of LexaLite.
BAC shall dedicate its limited optical design capability exclusively to
LexaLite and shall do such designs without compensation other than the fees
agreed to herein, unless such workload requires additional design assistance.
BAC shall grant LexaLite exclusive rights to each new design or Product.
Those rights shall include trade secrets, copyright and patent
opportunities, as such may be created. All costs relating to such
intellectual property shall be to the account of LexaLite.
In consideration of these services to be provided to LexaLite by BAC,
LexaLite shall pay BAC a flat fee of twenty five hundred dollars ($2,500) per
month, payable on, or about, the first of each month. (Note: these parties
contemplate entering into a separate contract that will enable BAC to
participate in the rewards of high margin products as they achieve successful
production.)
This Agreement shall be for the Calendar Year 1993 and shall automatically be
extended for an additional one year term on the first day of each year
thereafter. It may be terminated without cause by either party on one year's
written notice and for proper cause, without other notice if a written notice of
default shall not be remedied within thirty days after being served.
Disputes arising hereunder shall be submitted to the firm of Pointner & Xxxxxx
for adjudication (non-binding). This Agreement is subject to the laws and courts
of the State of Michigan. Nothing herein shall be construed as creating any
employer/employee relationship and BAC may substitute persons and schedule times
and work locations at its own discretion.
Signed, in agreement hereto, this 17th day of September, 1993
----
LEXALITE INTERNATIONAL CORPORATION BUSINESS ACTIVITIES CORPORATION
/s/ XXXX XXXXXXX /s/ XXXX XXXXXX
------------------------------------- -------------------------------
by Xxxx Xx Xxxxx, Corporate Secretary by Xxxx Xxxxxx, President
for its Board of Directors for its Board of Directors
Product Introduction and Market Development Contract
Page 1 of 3 Pages
THIS CONTRACT, made and effective this 20th day of February, 1993, is by and
between LexaLite International Corporation, a Delaware corporation, of X.X. 00,
Xxxxxxxxxx, Xxxxxxxx 00000, hereinafter "LexaLite" and Business Activities
Corporation, a Michigan corporation, of Xxxx Xxxxxx Xxx 000, Xxxxxxxxxx,
Xxxxxxxx 00000, hereinafter "BAC".
WHEREAS LexaLite has many new products both in lighting and in new markets
such as, but not limited to, marine products, and is desirous of obtaining
representation and professional services relating to the introduction and
acceptance of such new products in their respective markets and,
WHEREAS BAC has a working knowledge of all such new products of LexaLite
and also has knowledge of the Lighting and Marine markets and further has
established contacts with the buyers and the specifying influences within those
two markets as well as in others and,
WHEREAS LexaLite and BAC have a separate Design/Development Contract
covering new product design and development as well as optical designs of
lighting components and which existing contract is satisfactory to both parties.
NOW THEREFORE, LexaLite and BAC do agree to hold the existing
Design/Development Contract separate, in all respects, from this Product
Introduction and Market Development Contract and do further agree to the
definitions and terms of this contract, as follows:
DEFINITIONS:
Margin The sales Margin as presently calculated by LexaLite. (Actual
selling price less manufacturing cost of goods sold. The cost
of goods sold does not include Selling, G & A, or Other
Expenses.) If LexaLite's method of calculating Margin be
changed, the Margins of Schedule A must also be changed to
maintain the same effect as if the present method of
calculation had remained unchanged.
Objective To introduce and thereafter increase market specifications
and acceptance of those LexaLite Products included in
Schedule A.
Product(s) A product included in this contract by listing in an attached
Schedule A; initially all 800 Series Reflexors(R), lenses
and enclosures.
Service(s) Any services, technical assistance, specification work or
other effort provided by BAC, either to, or on behalf of,
LexaLite, toward achievement of the objective.
Product Introduction and Market Development Contract
Page 2 of 3 Pages
IT IS AGREED:
1. BAC shall make diligent but reasonable efforts to increase both acceptance
and specification of the existing Products of LexaLite that have been
introduced in recent years and are listed on attached original Schedule A.
2. BAC shall assist LexaLite in introducing and obtaining specification and
market acceptance of new Products, as each are added to the listing on the
then revised Schedule A.
3. Efforts to achieve the Objective shall include BAC furnishing Services (such
as technical expertise) to LexaLite without hourly or other compensation
charges, provided, such expertise or skills are available. A request, by
LexaLite, for Services to be provided at a remote location shall authorize
related reasonable and proper expenses necessary to the providing of such
Services.
4. In consideration of its efforts, LexaLite shall pay BAC a commission on the
sales of all Products. The initial commission schedule is attached, hereto,
as Schedule A, and includes existing and future 800 Series reflectors,
refractors, lenses and enclosures.
5. New products of LexaLite that result from the separate and earlier
referenced Design/Development Contract, shall automatically be added to
Schedule A as each becomes production. LexaLite may, at its option, add
other products or lines of products to Schedule A if it desires BAC Services
for that product or line of products. Products shall become non-
commissionable when the Margin on said Product drops below the minimum
specified for that Product. If the Margin subsequently improves to the
minimum, the Product shall again become commissionable. Products may be
removed from Schedule A only with the written consent of both parties.
6. Commissions under Schedule A shall be payable not later than the twentieth
day of each month on the sales of covered Products shipped during the
preceding month. Should any trade payable created on the sale(s) of covered
Products with normal thirty day terms remain unpaid for ninety days,
LexaLite shall debit BAC and deduct the amount of the commission previously
paid on subject unpaid sale(s) from the next commission payment made to BAC.
(If the payable is subsequently received, the amount deducted shall then be
repaid.)
7. Commissions are payable for the useful life of each Product but only while
that Product enables a premium price such that the sales Margin equals a
specified minimum percentage of thirty percent (30%) if none is specified. A
Product falling below that, such as during the peak of its volume cycle, may
again be commissionable as its Margin increases on the back side of the
volume cycle. Products on Schedule A may have unique commission schedules.
Any 800 Series Product, for example, is commissioned at 1 1/2% if its Margin
is greater than 35%, at 1% if its Margin is greater than 30% but less than
35%, and not commissioned if its Margin less than 30%.
Product Introduction and Market Development Contract
Page 3 of 3 Pages
8. In view of the high cost of the initial efforts and the long term nature of
the return on that investment, both parties agree that this contract must be
of long duration and not subject to cancellation subject to the following
four exceptions:
(I) no further commissions are due and none have been payable for a
period of twelve consecutive months, in which event the contract
terminates.
(II) BAC provides no Services or Products for twelve (12) consecutive
years, in which event LexaLite may terminate the contract without
further obligation upon payment, in full, of all commissions then
payable.
(III) either party defaults under its obligations and, having received
notice of such default, has refused or been unable to remedy such
default. Disputes arising hereunder shall be submitted to the firm
of Pointner & Xxxxxx for adjudication (non-binding). Should the
dispute remain unresolved, an injured party shall be entitled to
take any action proper under the laws of the State of Michigan
including action to recover damages before an appropriate Court in
and for Charlevoix County.
(IV) by mutual written consent of the parties hereto.
Disclaimer: Neither BAC nor LexaLite is the agent or employee of the other.
Neither BAC nor LexaLite may make commitments binding on the other, BAC may not
accept orders or furnish prices on behalf of LexaLite, except where a quotation
has been furnished to BAC by LexaLite. Nothing herein shall be construed to
create any relationship other than a contractual relationship for commission
payments on future named product sales in consideration for technical and
promotional services on behalf of those named products.
This contract has been revised and this revision is hereby ratified on 17th
----
September, 1993
LEXALITE INTERNATIONAL CORPORATION BUSINESS ACTIVITIES CORPORATION
/s/ XXXX XXXXXXX /s/ XXXX XXXXXX
------------------------------------ -------------------------------
by Xxxx XxXxxxx, Corporate Secretary by Xxxx Xxxxxx, President
for its Board of Directors for its Board of Directors
Product Introduction and Market Development Contract
Schedule 'A'
Product Group I is included in the original, as others are added both parties
should initial and date each addition.
Named Products or Product Lines
Product Group Product Description
I. All 800 Series products including, but not limited to,
Reflexors(R), reflectors, lenses, enclosures, etc.
Accessories sold separately are also included but are
probably not commissionable as the Margin on such will
typically be below the minimum that is commissionable. The
selling price of accessories costed as part of an assembly
and the selling price of any assembly labor or other items
costed therein, including packaging, are also commissionable
if included in a package selling price but only if the
resulting Margin of the entire package is still sufficient to
equal the minimum (or a higher level) commission rate,
despite the lower margin inclusions.
Commission Schedule
Product Group Commission Rate
I. Commission shall be at one and one half percent (1 1/2%) of
the selling price if the Margin on the quantity of the shipped
item is greater than thirty five percent (35%) and at one
percent (1%) of the selling price if the Margin on the
quantity of the shipped item is less than thirty five percent
(35%) but greater than thirty percent (30%). No commission
shall be payable on any sales wherein the Margin on the
quantity of the shipped item is less than thirty percent
(30%).
