EXHIBIT 10.4.8
AMENDMENT NO. 2
TO
SUPPLY AGREEMENT
BETWEEN
XXXXXX COMMUNICATIONS CORPORATION
AND
NORTHERN TELECOM, INC.
Made as of this 24th day of June 1997, by and between Xxxxxx Communications
Corporation (hereinafter referred to as "Buyer"), an Oklahoma corporation
with offices at 00000 Xxxxx Xxxxxxxx Xxxxxxxxx, Xxxxx 000, Xxxxxxxx Xxxx,
Xxxxxxxx 00000 and Northern Telecom Inc. (hereinafter referred to as "Nortel"
or "Seller"), a Delaware corporation, with offices at 0000 X. Xxxxxxx
Xxxxxxxxxx, Xxxxxxxxxx, Xxxxx 00000.
WHEREAS, Buyer and Seller entered into a Supply Agreement dated as of
December 6, 1995, as amended December 20, 1995 (the "Agreement"); and
WHEREAS, Buyer and Seller now wish to amend the Agreement to include, among
other things, a new, extended Term, a commitment to purchase by Buyer and new
Equipment pricing, all as further described herein;
NOW, THEREFORE, in consideration of the mutual covenants herein contained,
Buyer and Seller agree to amend the Agreement as follows:
1. Amend Article 1 (DEFINITIONS) as follows, adjusting the numbering
sequence in Article 1 accordingly:
(a) Add new Section 1.1 as follows:
"'ADJUNCT PLATFORM' shall mean third party hardware and/or software,
onto which Seller has added software in support of the applications
listed in Annex 9 hereof ("Value-added Software") and
1
in some cases, integrated such third-party hardware and Value-added
Software into a system providing peripheral functionality for the
DMS-MTX, all more fully described in Annex 9, 'Adjunct Platforms.'"
(b) Add the words "during the Initial Term" to the end of Section 1.8
("INITIAL PURCHASE").
(c) Delete existing Section 1.21 (Term) and insert the following new
definitions in the appropriately numbered sections as determined by
their insertion in alphabetical order:
'EXTENDED TERM' shall mean the period commencing on June 24, 1997
("Extended Effective Date") and ending four (4) years thereafter.
"'INITIAL TERM' shall mean the period commencing on the date first
set forth above (hereinafter 'Effective Date') and ending on June 23,
1997.
2. Amend Article 2 (SCOPE) by deleting the word "Term" in Section 2.1 and
replacing it with "Initial Term and Extended Term."
3. Amend Article 3 (PURCHASE ORDERS) at Section 3.1 by deleting the words
"Term of this Agreement, or as it may be extended," in the first sentence
and replacing them with "Initial Term and Extended Term."
4. Amend Article 4 (PRICE) by adding the following to the end of Section 4.1:
"Buyer understands that it has a firm obligation to purchase/license no
less than $30 million net Price (i.e., Price less applicable discounts)
of Equipment and/or Software from Seller during the Extended Term
('Commitment')."
5. Amend Article 5 (PAYMENT) as follows:
(a) In Section 5.2 add the words "and before the Extended Effective
Date" after the date "December 31, 1995."
2
(b) Add a new Section 5.3 as follows:
"5.3 With respect to Purchase Orders for Equipment that include
Installation Services therefor, delivery of which Equipment is
taken by Buyer during the Extended Term, Buyer shall pay to
Seller the appropriate Price in accordance with the following:
5.3.1 70% of the Purchase Order Price shall be invoiced by Seller
upon shipment of the Switch in the case of a System
Installation or, in the case of an Expansion or Cell Site
Installation, upon shipment of the major components to the
Installation Site. Such payment shall be paid to Seller within
thirty (30) days following the date of Seller's invoice
therefor.
5.3.2 20% of the Purchase Order Price shall be invoiced by Seller
upon the date of Turnover. Such payment shall be paid to
Seller within thirty (30) days following the date of Seller's
invoice therefor.
5.3.3 10% of the Purchase Order Price shall be invoiced by Seller
after Acceptance of the Equipment as defined in Article 14
herein. Such payment shall be paid to Seller within thirty
(30) days following the date of Seller's invoice therefor."
6. Amend Article 9 (PATENT OR COPYRIGHT INFRINGEMENTS) by adding the
following to the single sentence constituting Section 9.4:
"or, (iii) alleging that method of use claims in such patent are
infringed by any service offering and/or by any use by Buyer of Equipment
furnished hereunder to make such service offering available."
7. Amend Article 10 (SOFTWARE LICENSE) by adding the words "During the
Initial Term" to the beginning of the first sentence of Subsection 10.2.2.
8. Amend Article 16 (REGULATORY COMPLIANCE) at Section 16.1 by adding the
following after the words "Effective Date:"
3
"for Equipment purchased during the Initial Term and in force on the
Extended Effective Date for Equipment purchased during the Extended Term"
9. Amended Article 17 (CHANGES) by deleting the opening paragraph of Section
17.5 in its entirety and replacing it with the following:
"Subject to Section 24.1 herein, for purchases during the Initial Term
Buyer understands and agrees that the execution of this Agreement
constitutes a firm, non-cancelable Purchase Order for the Initial Purchase
set forth in Section 1.0 of Annex 1 and the training courses set forth in
Section 4.0 of Annex 1. For purchases during the Extended Term Buyer
understands that the execution of this Agreement constitutes a firm,
non-cancelable Purchase Order for the initial purchase of Equipment and
training for the Extended Term ('Extended Term Initial Purchase') as set
forth in Section 1.0 and 2.0 of Annex 1A. However for Purchase Orders for
Equipment other than the Initial Purchase and Extended Term Initial
Purchase, upon written notification to Seller, Buyer may elect to cancel
such Purchase Orders prior to shipment of Equipment in accordance with the
following:"
10. Amend Article 24 (GENERAL) by inserting the words "or claims for
indemnification" after the word "otherwise" in Section 24.6.
11. Amend Annex 1 (EQUIPMENT AND SERVICES PRICING) as follows:
(a) Add the word "INITIAL TERM" to the beginning of the title and
adjust Annex 1 references in the Table of Contents and in Section 23
of the Agreement accordingly.
(b) Add the word "Initial" before the word "Term" in the first sentence
of the opening paragraph.
(c) Add the words "During the Initial Term" to the beginning of Section
5.2.
12. Add Annex 1A (EXTENDED TERM EQUIPMENT AND SERVICES PRICING) as set out
in Schedule "A" of this Amendment.
4
13. Subject to Buyer executing this Amendment on or before June 30, 1997,
Seller hereby agrees to add the following to Annex 1A:
(a) Add the words "Subject to (b) below" to the beginning of the
sentence immediately preceding part (a) of Section 2.2.
(b) Add the following words to the end of Section 2.2(b):
"provided, without charge to Buyer and included as a part of the
Extended Term Initial Purchase, Seller shall provide Buyer with an
Adept Silver system and MDS 2.09 system as described in Section 4.0
of this Annex 1A."
(c) Add the following new Section 4.0 as follows:
"4.0 ADEPT SILVER AND MDS 2.09 SYSTEMS
4.1 MDS 20.9 System
PEC Description Qty
--- ----------- ---
MTX D02AMSACS ACCOUNTING MEDIAT. COLLECT. S/W MDS 2.0 2511
MTX D02AMSACSM ACCOUNTING MEDIAT. COLLECT. S/W MDS 2.0M.FE 2511
MDS 20BSYB HP MDS 2.0 SYBASE S/W YEAR FOR ACS 1
(Pending) FAULT MANAGEMENT/PERFORMANCE S/W MDS 3.0* 1
MDS 220TR HP MDS 2.0 K220 SERVER 1
MDS 221TR HP MDS 3.0 K220 H/W S/W SUPPORT 0S6 YR1 1
MDS 102TR HP MDS 2.0 K220 OPTION A H/W 1
MDS 103TR HP MDS 2.0 K200 OPT H/W SUPPORT 0S6 YR1 1
MDS 000LC MDS 2.0 NORTEL INTEGRATION 1
MDS 001LC MDS 2.0 CABLES AND MISC. H/W 4
MDS 002LC MDS 2.0 MAINTENANCE MODEM 1
MT 2000LC E,F&I FOR MDS 2.0 1
*When and if commercially available from Seller.
4.2 ADEPT Silver System
PEC Description Qty
--- ----------- ---
MTX A0002 ADEPT SILVER - FIRST PLATFORM 1
XE 8885JD ADEPT HP H/W - XXXXXX SWITCH 4 1
XE 8884JD ADEPT 3RD PARTY COMPONENT - SWITCH 4 1
XE 8886JD DEPT E, F&I 1"
5
14. Amended Annex 8 (RF ENGINEERING SERVICES STATEMENT OF WORK) by adding
the words "INITIAL TERM" to the title and the words "during the Initial
Term" after the words "design analysis and system verification" in the
first sentence.
15. Add a new Annex 8A (EXTENDED TERM RF ENGINEERING SERVICES STATEMENT OF
WORK) as set out in Schedule "B" of this Amendment.
16. Add a new Annex 9 ("ADJUNCT PLATFORMS") as set out in Schedule "C" of
this Amendment.
17. Add the appropriate Annex listings for new Annexes 8A and 9 to the Table
of Contents and Section 23 (ANNEXES), respectively.
18. Except as specifically modified by Amendment No. 1 and this Amendment
No. 2, the Agreement in all other respects shall continue in full force
and effect.
IN WITNESS WHEREOF, the parties have caused this Amendment to be signed by
their duly authorized representatives effective as of the date first set
forth above.
XXXXXX COMMUNICATIONS INC. NORTHERN TELECOM INC.,
By: /s/ G. Xxxxxx Xxxxx By: /s/ Xxxxxxx Xxxxxxxxx
------------------------------- --------------------------------
G. Xxxxxx Xxxxx Xxxxxxx Xxxxxxxxx
------------------------------- --------------------------------
Type or Print Name Type or Print Name
Title: President Title: VP Finance
---------------------------- ----------------------------
Date: 6/24/97 Date: 6/27/97
---------------------------- ------------------------------
6
SCHEDULE A
TO AMENDMENT NO. 2 OF
SUPPLY AGREEMENT BETWEEN
XXXXXX COMMUNICATIONS CORPORATION
AND NORTHERN TELECOM INC.
ANNEX 1A
EXTENDED TERM EQUIPMENT AND SERVICES
PRICING
During the Extended Term, Seller may, at its discretion, implement changes to
the Equipment, modify the drawings and Specifications relating thereto, or
substitute Equipment of more recent design; provided, however, that any such
changes, modifications or substitutions shall not materially and adversely
affect performance of the System. Unless otherwise specifically stated,
Services are not included in Equipment List Prices.
Buyer shall take delivery of the Extended Term Initial Purchase within
eighteen (18) months of the Extended Effective Date.
During the Extended Term, for 800 MHz AMPS/TDMA Equipment available to
Seller's customers as of the Extended Effective Date other than the Equipment
included in the Extended Term Initial Purchase ("Extended Term Additional
Equipment"), Prices shall be Seller's then-current List Prices for DMS-MTX
products less the applicable discounts set out in Section 3.2 of this Annex.
1.0 EXTENDED TERM INITIAL PURCHASE
The Equipment configurations set out in this Section 1.0 assume that
Buyer is providing sufficient floor space for the described Equipment.
Additional Equipment and/or Installation may be required at Buyer's
expense in the event Buyer fails to provide such floor space.
Seller shall provide, and Buyer shall purchase for its technicians, the
training courses listed in Subsections 1.1.1.4 and 1.2.1.3 below. All
training is conducted at Seller's facilities in Richardson, Texas.
Tuition rates listed below are exclusive of travel, lodging and per
diem expenses,
A-1
which shall be for Buyer's account. Course content is subject to
change at Seller's discretion.
1.1 MARYLAND RSA 2- (Moving Existing Catocin Site MTX)
1.1.1 Switch Upgrade and Training
1.1.1.1 Switch Equipment Upgrade
LIST EXTENDED
DESCRIPTION QTY PRICE PRICE
DTC XPM+Upgrade NTMX77AA Processor 2 $39,700 $79,400
DTC XPM+Upgrade NTMX71AA Paddle Board 2 $2,500 $5,000
MCAM Cabinet 1 $29,472 $29,472
MEDP Cabinet 2 $25,717 $51,434
EDSPM Shelf NTAX7604 3 $20,000 $60,000
NTEX93AA EDSP Cards 16 $32,000 $512,000
NTAX80AA Controller Cards 11 $2,520 $27,720
NT2X70AF Power Converter Cards 11 $3,255 $35,805
CAP processor NTAX74AA - Spares 1 $59,600 $59,600
Time Switch NTAX78AA - Spares 1 $8,400 $8,400
ISDN Signal Processor NTBX01CA - Spares 1 $24,000 $24,000
Switch Upgrade Subtotal $892,831
1.1.1.2 Switch Equipment Expansion
LIST EXTENDED
DESCRIPTION QTY PRICE PRICE
MCTM-1 Cabinet ICP metro w/ICP Packfill 4 $310,000 $1,240,000
240 Port ICP Packfill w/Digital metro Proc 2 $257,625 $515,250
ICP METRO Processor-Digital Included
480 Port DTC Packfill 1 $204,528 $204,528
Capacity Expansion Subtotal $1,959,778
DISCOUNT ($1,141,004)
1.1.1.3 Switch Software (1997 Fee)
QTY LIST EXTENDED
DESCRIPTION (SUBS) PRICE PRICE
MTX-06 Base Load & 97 S/W Release License
Fee 29,600 $6/SUB Included
ANSI ISUP TR-317 Included Included Included
DCCH Sleep Mode Included Included Included
DCCH PSID/RSID Included Included Included
Group Ringing Included Included Included
Software Application fee 1 $25,000 Included
1997 Annual Software Fee Included
A-2
1.1.1.4 Nortel Switch E, F&I
LIST EXTENDED
DESCRIPTION QTY PRICE PRICE
Cabinet Expansion 5 $12,534 $62,670
Cabinet De-commissioning 10 $ 1,200 $12,000
Freight 22 $ 504 $11,088
Cabinet De-commissioning 10 $ 4,800 $48,000
Move Misc. Equip. (MAP, modems, etc.) 40 $ 120 $ 4,800
Cutover assistance to new MTX in Xxxxxxxxx 80 $ 120 $ 9,600
MEDP Expansion 2 $ 7,704 $15,408
Subtotal $163,566
1.1.1.5 Training
LIST EXTENDED
DESCRIPTION QTY PRICE PRICE
MTX Maintenance 4 $ 6,000 $24,000
Translations 4 $ 2,000 $ 8,000
Networking 4 $ 2,250 $ 9,000
Introduction to MTX MAP #925 4 $ 1,200 $ 4,800
Subtotal $ 45,800
TOTAL MD2 SWITCH UPGRADE PRICE $ 1,920,931
STRATEGIC DISCOUNT $(1,711,565)
NET TOTAL MDS SWITCH UPGRADE PRICE $ 209,366
1.1.2 Maryland RSA 2 - Cell Site Equipment
LIST EXTENDED
DESCRIPTION QTY PRICE PRICE
XXX XXXXX
00 CH. 120 SECT/ICRM+/ATC 1 $492,752 $492,752
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 5,935 $ 5,935
Subtotal $ 505,837
OCEAN PINES
96 CH. 120 SECT/ICRM+/ATC 1 $492,752 $492,752
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 5,935 $ 5,935
Subtotal $ 505,837
SALISBURY
64 CH. 120 SECT/ICRM+/ATC 1 $344,150 $344,150
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 4,125 $ 4,125
Subtotal $ 355,425
CAMBRIDGE
64 CH. 120 SECT/ICRM+/ATC 1 $344,150 $344,150
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 4,125 $ 4,125
Subtotal $ 355,425
PRINCE XXXXXXXXX
48 CH. 120 SECT/ICRM+/ATC 1 $276,942 $276,942
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 3,220 $ 3,220
Subtotal $ 287,312
A-3
LIST EXTENDED
DESCRIPTION QTY PRICE PRICE
LEONARDTOWN
48 CH. 120 SECT/ICRM+/ATC 1 $276,942 $276,942
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 3,220 $ 3,220
Subtotal $ 287,312
SNOW HILL
24 CH. OMNI/ICRM+/ATC 1 $148,305 $148,305
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 2,315 $ 2,315
Subtotal $ 157,770
PRINCESS XXXX
48 CH. 120 SECT/ICRM+/ATC 1 $276,942 $276,942
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 3,220 $ 3,220
Subtotal $ 287,312
XXXXXXXX
48 CH. 120 SECT/ICRM+/ATC 1 $276,942 $276,942
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 3,220 $ 3,220
Subtotal $ 287,312
XXXXXXX CLIFFS
48 CH. 120 SECT/ICRM+/ATC 1 $276,942 $276,942
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 3,220 $ 3,220
Subtotal $ 287,312
LEXINGTON PARK
48 CH. 120 SECT/ICRM+/ATC 1 $276,942 $276,942
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 3,220 $ 3,220
Subtotal $ 287,312
POCOMOKE CITY
24 CH. OMNI/ICRM+/ATC 1 $148,305 $148,305
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 2,315 $ 2,315
Subtotal $ 157,770
EASTON
64 CH. 120 SECT/ICRM+/ATC 1 $344,150 $344,150
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 4,125 $ 4,125
Subtotal $ 355,425
KENT ISLAND
64 CH. 120 SECT/ICRM+/ATC 1 $344,150 $344,150
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 4,125 $ 4,125
Subtotal $ 355,425
OCEAN CITY NORTH
32 CH. 120 SECT/ICRM+/ATC 1 $214,312 $214,312
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 2,315 $ 2,315
Subtotal $ 223,777
OCEAN CITY SOUTH
24 CH. OMNI/ICRM+/ATC 1 $148,305 $148,305
Dual Mode Radio Unit Monitor 1 $ 7,150 $ 7,150
Small RF/CE Frame Power and Ground 1 $ 2,315 $ 2,315
Subtotal $ 157,770
A-4
UNIT EXTENDED
DESCRIPTION QTY PRICE PRICE
MUTUAL BAMS
48 CH. 120 SECT/ICRM+/ATC 1 $276,942 $276,942
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
Small RF/CE Frame Power and Ground 1 $3,220 $3,220
Subtotal $287,312
OC INLET
32 CH. OMNI/ICRM+/ATC 1 $168,527 $168,527
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
Small RF/CE Frame Power and Ground 1 $2,315 $2,315
Subtotal $177,992
XXXXXX CITY
24 CH. OMNI/ICRM+/ATC 1 $148,305 $148,305
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
Small RF/CE Frame Power and Ground 1 $2,135 $2,135
Subtotal $157,770
XXXXXXXXXXXX
00 XX. OMNI/ICRM+/ATC 1 $148,305 $148,305
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
Small RF/CE Frame Power and Ground 1 $2,315 $2,315
Subtotal $157,770
WICIMICO PARK
48 CH. 120 SECT/ICRM+/ATC 1 $276,942 $276,942
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
Small RF/CE Frame Power and Ground 1 $3,220 $3,220
Subtotal $287,312
XXXXXXXXXX
00 XX. 000 XXXX/XXXXx/XXX 0 $344,150 $344,150
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
Small RF/CE Frame Power and Ground 1 $4,125 $4,125
Subtotal $355,425
GROWTH CELL SITES
16 CH. OMNI/ICRM+/ATC w/Radios 11 $293,419 $3,227,609
(TRUII/SCLPA) DCCH and DLCR 104 $10,500 $1,092,000 $4,319,609
RADIOS:
(TRU-2/SCLPA) ACCH and ALCR 112 $10,500 $1,176,000
Dual Mode Radios (TRU-2 and SCLPA)s 671 $10,500 $7,045,500
Subtotal $8,221,500
SPARES
Cell Site Spares Kit (ICRM/DRU) 2 $54,974 $109,948 $109,948
Cell Site Equipment Subtotal $17,836,971
DISCOUNT $(6,985,288)
New Growth Incentive Credit $(4,319,609)
A-5
UNIT EXTENDED
DESCRIPTION QTY PRICE PRICE
NORTEL CELL SITE E, F&I:
Engineering 22 $450 $9,900
Install & Commission 24/32 OMNI Cell Site 6 $15,912 $95,472
Install & Commission 24/48 SECT Cell Site 9 $29,520 $265,680
Install & Commission 64 SECT Cell Site 5 $35,424 $177,120
Install & Commission 96 SECT Cell Site 2 $41,328 $82,656
Subtotal $630,828
1.1.3 RF Engineering Services
RF Design Evaluation 22 $6,903 Included
RF Frequency Planning 22 $1,420 Included
MARYLAND RSA 2 NET CELL SITE PRICE $8,254,902
1.2 FREDERICK SWITCH - (PA 10, Hagerstown, Cumberland and Maryland 3)
1.2.1 Switch Equipment and Training
1.2.1.1 Switch Equipment
UNIT EXTENDED
DESCRIPTION QTY PRICE PRICE
MUTUAL BAMS
SuperNode SE Core Cabinet 1 $1,112,109 $1,112,109
MCAM Cabinet 1 $112,779 $112,779
MCGM Cabinet 2 $75,695 $151,390
MCTM-I Cabinet 2 $45,294 $90,588
240 Port ICP Packfill for ENET 3 $160,500 $481,500
240 Port ICP Packfill for Digital 3 $113,196 $339,588
480 Port DTC Packfill 1 $204,528 $204,528
MEDP Cabinet 1 $25,277 $25,277
EDSPM Shelf NTAX7604 3 $20,000 $60,000
NTEX93AA EDSP Cards 5 $32,000 $160,000
NTAX80AA Controller Cards 5 $2,520 $12,600
NT2X70AF Power Converter Cards 7 $3,255 $22,785
NT9X14EA 96M Cards 4 $99,456 $397,824
Turbolink Kit 1 $4,239 $4,239
SuperNode SE Spares w/Cabinet LOT $613,412 $613,412
SS7 Link Interface Units (V.35) 3 $13,352 $40,056
Multiprotocol Controller CP 3 $3,150 $9,450
X.25 Network Links NT6X91BB 2 $3,150 $6,300
I/O Control Cards 2 $580 $1,160
Supermode MAP Equipment w/Furniture 1 $32,215 $32,215
Subtotal $2,877,800
DISCOUNT ($1,551,120)
A-6
1.2.1.2 Switch Software (1997)
QTY LIST EXTENDED
DESCRIPTION (SUBS) PRICE PRICE
MTX-04/06 Base Load & 97 S/W Release
License Fee 30,000 $6/Sub Included
ANSI ISUP TR-317 Included Included Included
DCCH Sleep Mode Included Included Included
DCCH PSID/RSID Included Included Included
Group Ringing Included Included Included
Calling Line ID Included Included Included
RDIO Remote Radio I/F Price per Radio Included Included Included
Software Application Fee 1 $25,000 Included
1997 Annual Software Fee Included
1.2.1.3 Nortel Switch E, F&I
LIST EXTENDED
DESCRIPTION QTY PRICE PRICE
New Switch Install & Commission LOT $166,432 $166,432 $166,432
1.2.1.4. Training
LIST EXTENDED
DESCRIPTION QTY PRICE PRICE
MTX Maintenance 4 $6,000 $24,000
Transalations 4 $2,000 $ 8,000
Networking 4 $2,250 $ 9,000
Introduction to MTX MAP #925 4 $1,200 $ 4,800
Subtotal $45,800
NEW SWITCH DISCOUNT ($1,809,000)
NEW TOTAL FREDERICK SWITCH PRICE $729,912
1.2.2 Cell Site Equipment Upgrade - (PA 10, Hagerstown, Cumberland and
Maryland 3)
1.2.2.1 Cell Site Equipment
UNIT EXTENDED
DESCRIPTION QTY PRICE XXXXX
XXXXXXX
16 CH. RCMI OMNI to ICRM+ OMNI UPGRADE 1 $80,577 $80,577
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
CE Bay ATC Upgrade 1 $695 $695
8 CH. ATC retrofit 1 $11,000 $11,000
8 CH. ATC retrofit expansion 1 $11,000 $11,000
NT330BD RF Frame PA to ATC Cable 16 $110 $1,760
(TRU-2/SCLPA) DCCH, ACCH, DLCR, ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 9 $10,500 $94,500
Subtotal $253,657
A-7
UNIT EXTENDED
DESCRIPTION QTY PRICE PRICE
SIDELING HILL
16. CH.RCMI OMNI to ICRM+ OMNI UPGRADE 1 $80,577 $80,577
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
CE Bay ATC Upgrade 1 $695 $695
8 CH. ATC retrofit 1 $11,000 $11,000
8 CH. ATC retrofit expansion 1 $11,000 $11,000
NT330BD RF Frame PA to ATC Cable 16 $110 $1,760
(TRU-2/SCLPA) DCCH, ACCH, DLCR, ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 7 $10,500 $73,500
Subtotal $232,657
XXXXXX KNOB
16 CH.RCMI OMNI to ICRM+ OMNI UPGRADE 1 $80,577 $80,577
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
CE Bay ATC Upgrade 1 $695 $695
8 CH. ATC retrofit 1 $11,000 $11,000
8 CH. ATC retrofit expansion 1 $11,000 $11,000
NT330BD RF Frame PA to ATC Cable 16 $110 $1,760
(TRU-2/SCLPA) DCCH, ACCH, DLCR, ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 10 $10,500 $105,000
Subtotal $264,157
CATOCIN
48 CH.RCMI SECT to ICRM+ SECT UPGRADE 1 $110,610 $110,610
00-00 XX. XXXX Expansion 1 $36,599 $36,599
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
CE Bay ATC Upgrade 1 $695 $695
8 CH. ATC retrofit 3 $11,000 $33,000
8 CH. ATC retrofit expansion 3 $11,000 $33,000
NT330BD RF Frame PA to ATC Cable 48 $110 $5,280
(TRU-2/SCLPA) DCCH, ACCH, DLCR, ALCR 12 $10,500 $126,000
DualMode Voice Radios (TRU-2 and SCLPA)s 38 $10,500 $399,000
Subtotal $756,309
XXXXXXXX
00 XX. XXXX OMNI to ICRM+ OMNI UPGRADE 1 $80,577 $80,577
00-00 XX. OMNI Expansion 1 $56,661 $56,661
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
CE Bay ATC Upgrade 1 $695 $695
8 CH. ATC retrofit 1 $11,000 $11,000
8 CH. ATC retrofit expansion 1 $11,000 $11,000
NT330BD RF Frame PA to ATC Cable 16 $110 $1,760
(TRU-2/SCLPA) DCCH, ACCH, DLCR, ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 15 $10,500 $157,500
Subtotal $373,318
A-8
UNIT EXTENDED
DESCRIPTION QTY PRICE PRICE
THURMONT
16 CH. RCMI OMNI to ICRM+ OMNI UPGRADE 1 $80,577 $80,577
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
CE Bay ATC Upgrade 1 $695 $695
8 CH. ATC retrofit 1 $11,000 $11,000
8 CH. ATC retrofit expansion 1 $11,000 $11,000
NT330BD RF Frame PA to ATC Cable 16 $110 $1,760
(TRU-2/SCLPA) DCCH, ACCH, DLCR, ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 10 $10,500 $105,000
Subtotal $264,157
BRUNSWICK
00-00 XX. OMNI Expansion 1 $56,661 $56,661
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
CE Bay ATC Upgrade 1 $695 $695
8 CH. ATC retrofit 1 $11,000 $11,000
8 CH. ATC retrofit expansion 1 $11,000 $11,000
NT330BD RF Frame PA to ATC Cable 32 $110 $3,520
(TRU-2/SCLPA) DCCH, ACCH, DLCR, ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 14 $10,500 $147,000
Subtotal $284,001
XXXXXXXXX
48 CH. RCMI SECT to ICRM+ SECT UPGRADE 1 $110,610 $110,610
00-00 XX. XXXX Expansion 1 $36,599 $36,599
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
CE Bay ATC Upgrade 1 $695 $695
8 CH. ATC retrofit 3 $11,000 $33,000
8 CH. ATC retrofit expansion 3 $11,000 $33,000
NT330BD RF Frame PA to ATC Cable 48 $110 $5,280
(TRU-2/SCLPA) DCCH, ACCH, DLCR, ALCR 12 $10,500 $126,000
DualMode Voice Radios (TRU-2 and SCLPA)s 44 $10,500 $462,000
Subtotal $819,309
URBANA
16-32 CH OMNI Upgrade 1 $56,661 $56,661
Digital CSM (NT3P70BC) 1 $4,975 $4,975
NTFM22CA 16CH. RF OMNI ATC FRAME 1 $49,000 $49,000
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
CE Bay ATC Upgrade 1 $695 $695
8 CH. ATC retrofit 1 $11,000 $11,000
8 CH. ATC retrofit expansion 1 $11,000 $11,000
NT330BD RF Frame PA to ATC Cable 16 $110 $1,760
(TRU-2/SCLPA) DCCH, ACCH, DLCR, ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 15 $10,500 $157,500
Subtotal $292,741
A-9
UNIT EXTENDED
DESCRIPTION QTY PRICE PRICE
FUNKSTOWN
16 CH.RCMI OMNI to ICRM+ OMNI UPGRADE 1 $80,577 $80,577
00-00 XX. OMNI Upgrade 1 $56,661 $56,661
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
CE Bay ATC Upgrade 1 $695 $695
8 CH. ATC retrofit 1 $11,000 $11,000
8 CH. ATC retrofit expansion 1 $11,000 $11,000
NT330BD RF Frame PA to ATC Cable 16 $110 $1,760
(TRU-2/SCLPA) DCCH, ACCH, DLCR, ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 15 $10,500 $157,500
Subtotal $373,318
170 EAST/XXXXXX
48 CH.RCMI SECT to ICRM+ SECT UPGRADE 1 $110,610 $110,610
00-00 XX. XXXX Expansion 1 $36,599 $36,599
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
CE Bay ATC Upgrade 1 $695 $695
8 CH. ATC retrofit 2 $11,000 $22,000
8 CH. ATC retrofit expansion 2 $11,000 $22,000
NT330BD RF Frame PA to ATC Cable 48 $110 $5,280
(TRU-2/SCLPA) DCCH, ACCH, DLCR, ALCR 12 $10,500 $126,000
DualMode Voice Radios (TRU-2 and SCLPA)s 25 $10,500 $262,500
Subtotal $597,809
XXXXXXX MTN/CLEARSPRING
16 CH.RCMI OMNI to ICRM+ OMNI UPGRADE 1 $80,577 $80,577
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
CE Bay ATC Upgrade 1 $695 $695
8 CH. ATC retrofit 1 $11,000 $11,000
8 CH. ATC retrofit expansion 1 $11,000 $11,000
NT330BD RF Frame PA to ATC Cable 16 $110 $1,760
(TRU-2/SCLPA) DCCH, ACCH, DLCR, ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 8 $10,500 $84,000
Subtotal $243,157
QUARRY
32 CH.RCMI OMNI to ICRM OMNI UPGRADE 1 $93,295 $93,295
00-00 XX. OMNI Expansion 1 $56,716 $56,716
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
CE Bay ATC Upgrade 1 $695 $695
8 CH. ATC retrofit 2 $11,000 $22,000
8 CH. ATC retrofit expansion 1 $11,000 $11,000
NT330BD RF Frame PA to ATC Cable 32 $110 $3,520
(TRU-2/SCLPA) DCCH, ACCH, DLCR, ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 29 $10,500 $304,500
Subtotal $545,851
X-00
XXXX XXXXXXXX
DESCRIPTION QTY PRICE PRICE
HAYSTACK
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
CE Bay ATC Upgrade 1 $695 $695
8 CH. ATC retrofit 1 $11,000 $11,000
8 CH. ATC retrofit expansion 1 $11,000 $11,000
NT330BD RF Frame PA to ATC Cable 16 $110 $1,760
(TRU-2/SCLPA) DCCH,ACCH,DLCR,ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 7 $10,500 $73,500
Subtotal $152,080
WARFORDSBURG/HAGERSTOWN
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
(TRU-2/SCLPA) DCCH,ACCH,DLCR,ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 15 $10,500 $157,500
Subtotal $211,625
NEW MARKET
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
SMALL RF/CE FRAME POWER & GROUND 1 $2,315 $2,315
(TRU-2/SCLPA) DCCH,ACCH,DLCR,ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 15 $10,500 $157,500
Subtotal $213,940
BUCKEYESTOWN
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
SMALL RF/CE FRAME POWER & GROUND 1 $2,315 $2,315
(TRU-2/SCLPA) DCCH,ACCH,DLCR,ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 14 $10,500 $147,500
Subtotal $203,440
EMMITSBURG
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
SMALL RF/CE FRAME POWER & GROUND 1 $1,410 $1,410
(TRU-2/SCLPA) DCCH,ACCH,DLCR,ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 4 $10,500 $42,000
Subtotal $97,535
SIDELING SOUTH
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
SMALL RF/CE FRAME POWER & GROUND 1 $2,315 $2,315
(TRU-2/SCLPA) DCCH,ACCH,DLCR,ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 15 $10,500 $157,500
Subtotal $213,940
BOONSBORO
Digital CSM (NT3P70BC) 1 $4,975 $4,975
Dual Mode Radio Unit Monitor 1 $7,150 $7,150
SMALL RF/CE FRAME POWER & GROUND 1 $1,410 $1,410
(TRU-2/SCLPA) DCCH,ACCH,DLCR,ALCR 4 $10,500 $42,000
DualMode Voice Radios (TRU-2 and SCLPA)s 14 $10,500 $147,000
Subtotal $202,535
A-11
1.2.2.2 Installed Base Radio Credit
UNIT EXTENDED
DESCRIPTION QTY PRICE PRICE
Installed Base DRU(s) Credited (49) ($10,500) ($514,500) ($514,500)
1.2.2.3 Spares
UNIT EXTENDED
DESCRIPTION QTY PRICE PRICE
Cell Site Spares Kit(ICRM/DRU) 2 $54,974 $109,948 $109,948
Cell Site Equipment Subtotal $6,705,484
DISCOUNT ($2,984,393)
1.2.2.4 Nortel Cell Site E, F&I
UNIT EXTENDED
DESCRIPTION QTY PRICE PRICE
EF&I RCMI updates 11 $2,160 $23,760
EF&I DCSM and DRUM 20 $4,320 $86,400
RF Frame I&C 8 $5,304 $42,432
ATC Retrofit 33 $480 $15,840
RF Frame I&C 14 $5,304 $74,256
Subtotal $242,688
* Total EF&I to do all listed work at one time.
1.2.2.5 RF Engineering Services
RF Design Evaluation 20 $6,903 Included
FR Frequency Planning 20 $1,420 Included
MARYLAND RSA 3 NET CELL SITE UPGRADE PRICE $3,449,279
1.3 RF SERVICES
Seller shall provide the RF design evaluation and frequency planning
Services included in the Price for Xxxxxxxx XXX 0 xxx Xxxxxxxx XXX 3 in
Subsections 1.1.3 and 1.2.2.5, respectively, of this Annex 1A in
accordance with the statement of work set out in Annex 8A of this
Agreement.
1.4 P-3 TRADE-IN CREDITS
Seller hereby agrees to grant a purchase credit in the amount of $750 to
Buyer for each P-3 radio unit it trades-in to Seller during the Extended
Term; provided, as follows:
A-12
(a) Each trade-in credit may be applied only against the purchase Price
of one TRU-2 and SCLPA radio unit ("TRU-2 Unit") and only one credit
may be applied against the purchase Price of each such TRU-2 Unit;
(b) Buyer shall replace each P-3 (de-installed hereunder and traded-in
to Seller) with a TRU-2 Unit; and,
(c) Seller shall de-install each applicable P-3 prior to the applicable
Turnover of the TRU-2 Unit replacing it.
Seller shall remove such de-installed P-3(s) in accordance with the
applicable project schedule. Buyer warrants that title to such
de-installed equipment shall be free and clear and shall pass to Seller
upon de-installation.
2.0 SOFTWARE RELEASE LICENSE FEE
2.1 During the Extended Term, Buyer shall pay Seller the following fees
for each Switch in service as of the Extended Effective Date or
purchased thereafter by Buyer under this Agreement (including the
Extended Term Initial Purchase):
(a) based on the audit described in Subsection 2.1.2 below, or the
determination of the number of subscribers at Turnover as
described in Subsection 2.1.3 below, as applicable, a Software
license fee per Switch each calendar year during the Extended Term
equal to the product of $6.00 times the number of subscribers on
such applicable Switch at the time of such audit or Turnover, as
applicable ("Software License Fee"); and,
(b) a Software application fee of $25,000 ("Software Application Fee")
per Switch per calendar year,
(cumulatively, the "Annual Software Fee"); provided, subject to
Subsection 2.1.1 below, in no event shall such Annual Software Fee be
less than $50,000 or greater than $250,000 for each applicable Switch
during the Extended Term.
A-13
Subject to Subsection 2.1.3 below, Seller shall invoice Buyer for the
applicable Annual Software Fee upon completion of the audit described
in Subsection 2.1.2 below and Buyer shall pay 100% of the applicable
invoice within thirty (30) days of the date of such invoice.
2.1.1 For the Switch in Buyer's Maryland 2 market only, no such $50,000
minimum Annual Software Fee shall apply in the event such audit
indicates that no subscriber database is datafilled on such Switch;
provided, Buyer shall pay the Software Application Fee for such Switch.
2.1.2 Except for the instances described in Subsection 2.1.3 hereinbelow,
commencing in 1998, at the beginning of each calendar year during the
Term, but not later than January 31st of each such calendar year,
Seller shall audit each applicable Switch under this Agreement (i.e.,
Buyer's Switches in its Cheyenne, Kansas, Maryland 2 and Maryland 3
markets) and any new Switch purchased by Buyer under this Agreement
for any other market(s) ("New Market Switch") to determine the number
of subscribers per Switch for purposes of calculating the applicable
Annual Software Fee for the calendar year during which the audit is
conducted. Buyer hereby gives Seller the right at its discretion to
conduct such audit remotely or visually on-site.
2.1.3 In the event Turnover of a New Market Switch occurs after January 31st
of any calendar year during the Term (including 1997), upon Turnover
of such New Market Switch, Seller may invoice Buyer for the $25,000
Software Application Fee and the applicable initial Software License
Fee based on the number of subscribers on such New Market Switch as
of the date of Turnover of such Switch, such initial Software License
Fee being prorated for the remainder of the calendar year in which
such New Market Switch is installed. Buyer shall pay 100% of the
applicable invoice within thirty (30) days of the date of such invoice.
2.2 For the Annual Software Fee Buyer shall be provided with one (1)
DMS-MTX standard, commercially available Software release per Switch,
as offered by Seller to its customers for 800 MHz AMPS/TDMA Equipment
application during the applicable calendar year. Buyer may license
additional Software releases offered by Seller to its customers for each
A-14
such Switch in a given Extended Term calendar year in addition to the
Software release included in such Annual Software Fee by paying Seller
the $25,000 Software Application Fee. All Software releases licensed
by Buyer hereunder shall include all Software, whether base or optional
features, contained in the standard, commercially available DMS-MTX
Software ("DMS-MTX Core Software"). Such DMS-MTX Core Software shall
not include the following:
(a) all CDMA-specific Software features, including, but not limited to,
IS-634 open interface and all other CDMA-specific interfaces; and,
(b) Software operating on an Adjunct Platform.
In all cases the applicable Software License Fee and/or Software
application Fee is exclusive of any hardware/firmware required to
operate the Software, but includes TAS services as described in this
Agreement.
3.0 DISCOUNTS
3.1 All discounts are included in the Prices set forth in Section 1.0 for
the Extended Term Initial Purchase and such Prices are not subject to
any additional discounts.
3.2 Extended Term Additional Equipment shall be discounted as follows;
provided, no discounts shall apply to (i) Hardware or Software
operating on an Adjunct Platform, (ii) Services, or (iii) OEM
Equipment:
Description Discount
----------- --------
Switch Hardware 40%
Cell Site Hardware 45%
RF Hardware 50%
A-15
SCHEDULE B
TO AMENDMENT NO. 2 OF
SUPPLY AGREEMENT BETWEEN
XXXXXX COMMUNICATIONS CORPORATION
AND NORTHERN TELECOM INC.
ANNEX 8A
EXTENDED TERM
RF ENGINEERING PERFORMANCE
AND DESIGN EVALUATION
The purpose of this Statement of Work is (a) to describe the scope of work
for Seller's RF engineering and network planning of cellular services to
evaluate the performance of a network of cell sites configured for AMPS
applications for the purpose of determining the requirements for deploying
digital TDMA services ("RF Frequency Planning") and (b) to establish the
process for applying such evaluation to Seller's design of a digital TDMA
System in order to meet the coverage and capacity requirements of Buyer's
Maryland RSA 2 market ("RF Design Evaluation"). There are currently 22
tri-sectored cells operating in the AMPS mode in Maryland RSA 2 ("MD2
Cells"). Seller shall evaluate the MD2 Cells to provide hand held, in-car
portable coverage throughout the RF coverage area. This process involves the
following steps:
- Evaluation of the existing AMPS cell sites and switching network and
establishing a baseline of current performance.
- Making recommendations for improvement to the existing network for 600mw
in-car portable coverage.
- Determining the general equipment requirements to enhance the coverage of
the network and the necessary switch and interconnect capacity.
B-1
A cost estimate for System optimization will be provided on a per cell and/or
per channel basis after the RF Frequency Planning and Design Evaluation scope
of work is completed and approved by Buyer.
1.0 NETWORK PLANNING SYSTEM EVALUATION
The purpose of this section is to describe the scope of work for Seller
to provide a System plan for one DMS-MTX switch and to provide System
verification to validate such plan and its implementation. Seller may
provide recommended design changes based upon its planning process.
Should specific details of Seller's planning process not be implemented
by Customer, Seller shall be released from responsibility for that
portion of the plan not implemented.
1.1 CAPACITY PLANNING
Seller shall provide a detailed capacity projection analysis at the cell
sites, controller and MTX levels, based on typical models addressed
within BTA/RSA areas served by the customer. The scope includes Buyer
providing input for the applicable customer input questionnaire (see
Attachment 1), capacity planning and/or forecasting report.
1.2 CAPACITY MONITORING
Seller shall provide a detailed capacity performance analysis of
in-service Buyer equipment (cell sites, controller and MTX). The
monitoring service includes collecting switch operational measurements,
and delivering a capacity analysis report to Buyer.
Seller shall estimate call handling capacity of switch and radio
equipment to identify when equipment resources will be exhausted before
system outages occur, allowing the operating company to be pro-active
in determining where to apply engineering resources for the purposes of
avoiding potential system failures and/or outages.
B-2
1.3 SELLER DELIVERABLES
Seller shall provide the following deliverables:
1. The high level Capacity Forecast/Projection Plan which provides
capacity requirements for the specific BTA/RSAs. The plan provides
preliminary estimates of busy hour call attempts demand versus
processor occupancy requirements at the System and subsystem levels.
2. A capacity planning Customer Information Questionnaire ("CIQ"),
which captures the customer inputs regarding Hardware and Software
Releases, features and/or services roll out, traffic call mix,
subscriber growth plan and traffic projections.
3. The detailed Capacity Plan, which is based on the CIQ, describes
the network and nodal capacity requirements for the specific Software
and Hardware included in the Equipment quoted. A statement of
modeling assumptions and the operating company's inputs from Buyer
shall be used by Seller as the basis for the capacity requirements.
4. The Capacity Monitoring Report, which provides in-depth analysis of
the busy hour call attempts handled by the in-service equipment and
the call processing occupancy of the processor in question. The
report is based on the operational measurements obtained from Buyer's
MD2 System, including but not limited to MTX, ICP, and ICRMs. The
report will include recommendations for growth plan or opportunities
for cell re-homing based on actual measurements of the processing
load.
2.0 RF ENGINEERING EVALUATION
A readiness evaluation phase is developed to determine if the RF portion
of the MD2 Cells is performing to the standards necessary for successful
B-3
commercial deployment of digital services, and if not, to provide
recommendations to Buyer on how best to proceed. This phase also
includes the detailed coverage and capacity design evaluation
(excluding frequency planning) of macro cells necessary to provide the
grade of service specified by Buyer.
2.1 DATA COLLECTION
To begin the data collection process, RF engineering will contact Buyer
to obtain the current status, frequency plan and configuration of the
system or cluster of cells to be optimized, and to advise of the
general requirements for a deployment of digital TDMA operation. In
addition, the service requirements and operating parameters will be
mutually agreed upon in writing by Buyer and Seller, including the
grade of service, mobile versus in-car portable coverage, and RF
coverage area. A CIQ will be presented to Buyer for completion. When
completed by Buyer, this questionnaire will contain data describing the
current network and identifying necessary operating parameters such as
grade of service.
2.2. PERFORMANCE AUDIT AND BENCH MARKING
2.2.1 OPERATIONAL MEASUREMENTS
Seller will establish the general condition of the system in terms of
performance benchmarks that can be used to evaluate historical and
ongoing performance improvement or changes. The system performance
baseline will be established by Seller evaluating the Buyer provided
switch performance related to operational measurements ("OM")
maintained on the switch. Customer is required to provide remote access
to the Switch database to permit table set-up and data collection.
OM will be set-up and monitored by a member of the Seller deployment
team at least one week prior to the arrival of the RF Engineering
evaluation team to evaluate the existing system performance metrics and
establish a
B-4
baseline prior to performance of applicable optimization Services;
provided Buyer purchases such Seller optimization Services. The OM will
be monitored during the deployment process and for at least one week
after such team leaves the market. This is to ensure that any
performance enhancements can be verified, and further serves to
establish the new System performance baseline.
2.2.2 RF PROPAGATION PREDICTION/INTERFERENCE ANALYSIS
Seller will perform a general RF Propagation Prediction/Interference
Analysis of the existing network. This task involves entering all
System specific information, such as coordinates, tower heights, power
levels, frequency plan, etc. into the PlaNET-Registered Trademark-
automated tool.
The information derived from the RF Propagation/Prediction Analysis
will include coverage analysis for each applicable cell, adjacent and
co-channel carrier to interference (C/I) evaluation, and terrain
considerations. Upon request by the Buyer, such information will be
made available to the Buyer as Confidential Information. Such report
will contain the following elements:
- Buyer requirements
- Buyer input data summary
- Other input data summary
- System coverage plots
- Composite coverage plots
- Cell coverage and C/I plots
- Current Frequency plan
2.2.3 CELL SITE AUDITS
For each cell site in the System to be evaluated, Seller will conduct a
cell site audit. Site audits consist of verifying the installation and
operation of
B-5
the Seller radio Equipment. It is essential that the Equipment is
installed, configured, tested, and datafilled in the correct manner. The
audit ensures that the Equipment is working properly and is not
adversely affecting any existing equipment or service.
Site audits will be performed prior to any extensive performance
related adjustments being made. A Site Audit Report will be provided to
the Buyer within 30 days after completion of the audit.
2.2.4 SYSTEM DRIVE TEST DATA COLLECTION AND ANALYSIS
Seller RF Engineering group will perform a drive test of the MD2 Cells.
The drive routes will include all areas mutually agreed upon by Buyer
and Seller RF engineering as the primary RF coverage areas for the MD2
Cells. The data monitored and gathered will include hand-off points,
signal strength, C/I levels and path balance characteristics of the
System for both the forward and reverse paths. This data will then be
post-processed, plotted and analyzed to determine specific performance
anomalies. Further drive testing may be performed at Seller's
discretion, as determined by Seller's RF engineering team.
As the evaluation effort progresses through ongoing performance analysis
and drive testing, appropriate parameter changes that can be readily
implemented are identified and specifically recommended to Buyer to
improve system call processing performance.
2.3 EVALUATION REPORT
Following complete evaluation of the System, a report will be submitted
to the Buyer outlining performance and recommendations for further
actions. Recommendations may include (but not limited to) the addition
of cell sites for coverage, capacity, or performance improvements,
changes in the operating parameters of the network.
B-6
3.0 SERVICE SUPPLY REQUIREMENTS
3.1 BUYER TO SUPPLY:
The Buyer will supply the following items in a timely manner:
- Non-billable phone numbers for test mobiles (3 minimum).
- Physical access to the switch databases and cell sites with Buyer's
technical staff available for interactive equipment audit and
alignment activities, as well as discussion during this service and
full authority to make database edits as required to successfully
perform the tasks necessary to optimize the System, provided, Buyer
purchases Seller's optimization services.
- Remote switch interface.
- Access to all System specific information (e.g. coordinates, tower
heights, frequency plan, ERP and azimuths).
- Tower climber, surveyor* or other contractor* for investigation and
correction of any physical problems identified during optimization;
provided, Buyer Purchases Seller's Optimization Services.
* TO BE PROVIDED AFTER IDENTIFICATION OF REQUIRED SCOPE OF WORK.
3.2 SELL TO SUPPLY:
Seller will supply drive test data collection and plot, and dropped call
and hand-off performance analysis, including required inputs and System
performance bench marking statistics.
- Tabulation of System parameters with specific recommendations for
change such as table and setting parameter change recommendations to
be provided interactively.
B-7
- System configuration change recommendations, where appropriate,
including antenna height, cell location changes, capacity increases,
and sectorization.
- Results and recommendations from site audits and system inspection
including any observed anomalies such as undesirable hardware
configuration or settings.
B-8
ATTACHMENT 1
CUSTOMER INFORMATION QUESTIONNAIRE
INITIAL DATA REQUIREMENTS
FOR NETWORK
(FOR EACH EXISTING SWITCH)
Networking requirements:
- List of networking partners
(Automatic Roaming & Call Delivery? Inter system Hand-off?)
- Connection to NACN, ITN, other Backbone Roaming Network?
- Connection to GTE FMR, FMR+, Pre-Call Validation Service?
- Connection to GTE, EDS or other Clearing House?
- IS-41 Rev. A, B or C?
- IS-41 via X.25 or SS7?
- Connection to other network entities not being proposed by Seller
(e.g. External HLR, Short Message Service Center, Authentication
Center, etc.)
- Major source of roaming traffic?
Tandeming requirements:
(SS7 INODE capability, IS-41+ tandeming)
PSTN interconnection requirements:
(ANSI ISUP, IS-41 Rev. A/B/C, Analog/Digital Trucks, Points of Presence,
Central Office connections)
B1-1
Regulatory requirements on number/location of switches:
(One per LATA/MSA/RSA/State/Region)
Restrictions/Regulations on the type of services:
(Mobility, Restricted Coverage Areas, Equal Access, intra/inter system toll
traffic, dialing restrictions, E911 connectivity)
Minimum Service requirements:
(Grade of Service, Availability, Number Portability, seamless networking)
Wireless Data requirements:
(Circuit switched data, CDPD)
Projected Call Mix:
(L-M, M-L, M-M, L-L)
How MINs are provisioned
Required Number Plan
Billing requirements:
(Real-time billing, connection to downstream processor, etc.)
OEM requirements:
- Connection to Voice Mail System?
- Interconnection requirements (XX-0, XX-0, SS7? ANI spill?)
B1-2
ATTACHMENT 2
CUSTOMER INFORMATION QUESTIONNAIRE
FOR RF ENGINEERING DATA REQUIREMENTS
(FOR EACH EXISTING SITE)
Frequency of each channel (voice, control)
Busy hour traffic for each sector
Grade of service required
Mobile vs. portable coverage requirements
Street/car/in-building coverage requirements
Coverage boundaries criteria (indicate on map)
Lat., long (deg., min., sec.)
Elevation (Ft, Mtr, AMSL)
Source of information on site location
Number of analog voice channels/sector
Number of digital voice channels/sector
Maximum transmitter power (Xxxxx, dBw) per sector
Tower Height (Ft, Mtr, AMSL)
Highest Point (Ft, Mtr, AMSL)
Height to Antenna C.L. (Ft, Mtr, AMSL) per sector
Horizontal Antenna Spacing (Ft, Mtr) per sector
Antenna name and model number per sector
Antenna Gain (dB) per sector
Cable length to RF equipment (Ft, Mtr) per sector
B2-1
SCHEDULE C
TO AMENDMENT NO. 2 OF
SUPPLY AGREEMENT BETWEEN
XXXXXX COMMUNICATIONS CORPORATION
AND NORTHERN TELECOM INC.
ANNEX 9
ADJUNCT PLATFORMS
This Annex and the attached exhibits define the special terms and conditions
applicable to the sale and purchase of Adjunct Platforms. Except as set
forth herein, the terms of the Agreement shall continue to apply. In the
event of a conflict between the provisions of this Annex and the provisions
of the body of the Agreement, the provisions of this Annex shall take
precedence over the provisions of the body of the Agreement.
1.0 PRICE
1.1 Subject to Sections 2.2(b) and 4.0 of Annex 1A, if applicable, the
Price for an Adjunct Platform shall consist of (i) unit list prices for
applicable third-party hardware, and (ii) the license fees to use the
associated Value-added Software as set forth in the form of Exhibit A
hereto, "Adjunct Platform Prices." Any discounts set forth in the
Agreement do not apply to Adjunct Platform Prices.
1.2 Unless otherwise specified, the above noted Prices are exclusive of
Seller's charges for any Services associated therewith.
1.3 The Prices are also exclusive of any taxes, which shall be the
responsibility of Buyer pursuant to Section 5.5 of the Agreement.
1.4 Prices for future orders will be quoted upon Buyer request.
2.0 PAYMENT
2.1 Notwithstanding anything to the contrary contained in Section 5 of the
Agreement, Buyer shall pay Seller the appropriate Price in accordance
with the following schedule:
2.1.1 90% of the Purchase Order Price shall be invoiced by Seller upon
shipment of the Adjunct Platform to the Installation Site. Such payment
shall be paid to the Seller within thirty (30) days following the date of
Seller's invoice therefor.
C-1
2.1.2 10% of the Purchase Order Price shall be invoiced by Seller after
Acceptance of the Adjunct Platform as defined in Section 6 of this
Annex 9. Such payment shall be paid to Seller within thirty (30) days
following the date of Seller's invoice therefor.
2.1.3 For Value-added Software components licensed separately (not part of
an Adjunct Platform), or other individual hardware units supplied by
Seller for use with the Adjunct Hardware, 100% of the Purchase Order
Price shall be invoiced by Seller upon delivery to Buyer. Such payment
shall be paid to Seller within thirty (30) days following the date of
Seller's invoice therefor.
3.0 WARRANTY
3.1 VALUE-ADDED SOFTWARE WARRANTY
Notwithstanding anything to the contrary contained in Section 7.2 of
the Agreement, Seller warrants that, provided the Value-added Software
is not altered by Buyer, and provided such Value-added Software is used
in conjunction with the applicable third-party hardware and Equipment
and such third-party hardware, Equipment and Value-added Software have
been maintained in accordance with the applicable third-party hardware
vendor's and Seller's recommended maintenance procedures, respectively,
the Value-added Software shall function during the Warranty Period
materially in accordance with Seller's specifications.
3.2 THIRD-PARTY HARDWARE
Third-party hardware, when furnished pursuant to this Annex, shall be
warranted by the applicable third-party hardware vendor in accordance
with such applicable vendor's standard warranty, which warranty shall be
passed through directly to Buyer. When requested by Buyer, Seller shall
furnish first echelon warranty support during Seller's regular business
hours, provided, however, that Buyer shall deal directly with such
applicable vendors for repair and return of defective material. The
Price includes warranty services from applicable vendor(s) for the first
year following shipment of the Adjunct Platform. Thereafter, Seller
recommends that Buyer also purchase an extended service plan from the
applicable third-party hardware vendor(s).
4.0 VALUE-ADDED SOFTWARE LICENSE
4.1 Buyer is hereby granted a non-exclusive license to use the Value-added
Software in accordance with Section 10 and Annex 6 of the Agreement and
the applicable NTPs. Notwithstanding anything to the contrary contained
in Annex 6, Buyer may use such Value-added Software in conjunction with
multiple processing units comprising the Adjunct Hardware.
4.2 From time to time, Seller may offer a corporate network right-to-use
fee, which right-to-use fee shall be limited to use by a specified number
of voice
C-2
channels on Buyer's System(s) for that price, or such other measurable
unit as may be applicable for a particular feature.
5.0 VALUE-ADDED SOFTWARE UPGRADES
5.1 Seller shall offer an annual service plan for Value-added Software
maintenance, which service plan shall include Seller Technical Assistance
Service (TAS) and such Value-added Software upgrade(s) as Seller may make
available during the year.
5.2 Buyer shall keep the Value-added Software current, i.e., no more than
two (2) numbered releases behind Seller's then-current release. Any new
Value-added Software release may require the purchase of additional
Hardware by Buyer.
5.3 If Buyer has elected to remain on an outdated release and wishes to
upgrade such Value-added Software to Seller's then-current release, the
price therefor shall be the lesser of (i) the Value-added Software
maintenance License Fee for each year an upgrade was not implemented
pursuant to Section 5.1 hereinabove; or (ii) the price differential
between the then-current release and Buyer's release then-residing on
Buyer's Adjunct Platform.
6.0 SCHEDULE FOR INSTALLATION, TESTING AND ACCEPTANCE
6.1 Seller's standard acceptance test procedures "Acceptance Test
Procedures" [ATP's] shall be used for the testing and acceptance of the
applicable Adjunct Platforms in the form of Exhibit B, "Acceptance Test
Plan." (See Exhibit B for the MDS Acceptance Test Procedures.)
Prerequisite site preparation is the responsibility of Buyer as also
addressed in Exhibit B.
6.2 Seller shall install the third-party hardware in accordance with a
schedule to be mutually agreed by the parties, a sample of which is
attached hereto as Exhibit C, "MDS Sample Project Schedule." Seller
shall provide Buyer three (3) days prior notification that such Adjunct
Platform is ready for testing, and following such notification, Buyer
agrees to have a representative present to witness and acknowledge
completion of such testing. Seller shall test the Adjunct Platform in
accordance with the applicable ATP's to determine the Adjunct Platform
conformity with such applicable standards and specifications as set
forth in the ATP's.
6.3 At the end of testing, Buyer shall either accept the Adjunct Platform
in writing as herein provided or notify Seller in writing specifying in
reasonable detail those particulars in which the Adjunct Platform does
not meet the applicable ATPs. With respect to any such particulars,
Seller shall promptly proceed to take corrective action, and following
correction, Buyer shall accept the Adjunct Platform in writing.
Successful completion of the aforementioned ATP's shall be deemed to
constitute "Acceptance" of the applicable Adjunct Platform.
C-3
SCHEDULE C (CONTINUED)
EXHIBIT A
ADJUNCT PLATFORM PRICING
(TO BE QUOTED UPON REQUEST)
Adjunct Platforms Price
----------------- -----
1.0 MTX Data Server ("MDS")
1.1 Hardware Components $_____________
1.2 MDS Software License Fees ($ per Voice Channel
License Fee)
1.2.1 Base Software $_____________
1.2.2 Modular Software
1.2.2.1 Accounting Mediation Services $_____________
1.2.2.2 Accounting Service Collection $_____________
1.2.2.3 CDPD Billing Service $_____________
1.2.3 Total Software License Fee $_____________
1.3 Total MDS Price $_____________
2.0 ADEPT
2.1 Hardware Components (Not offered for
purchase hereunder)
2.2 ADEPT Software ($ per Voice Channel
License Fee)
2.3 Total ADEPT Price $_____________
3.0 Integration/Installation $_____________
4.0 First-Year Warranty Services $_____________
5.0 Total Price $_____________
C-4
SCHEDULE C (CONTINUED)
EXHIBIT B
MDS ACCEPTANCE TEST PLAN
(SAMPLE)
The following test plan is intended to verify standard functionality for the
MDS product with release 2.0 Software. As new releases are introduced this
plan will be updated.
The plan assumes that all site preparation activities have been completed,
that the DMS-MTX switch(es) are configured to support the necessary links to
the MDS, and that the client applications ("Clients") connected to LAN are
available for the MDS access. The MDS installation must be complete before
Acceptance activities can begin (i.e. HP has installed and powered up server).
Buyer and Seller will initial below as tests are completed.
1. ACCOUNTING MEDIATION SERVICE (AMS) TEST PLAN
1.1 AREAS OF TEST (AMS)
1.0.1 Verify product delivery for accuracy and completeness before beginning
Acceptance testing
1.0.2 BASE PERFORMANCE
Verify switch site datafill.
UNIX site configuration.
Threshold Parameters.
1.0.3 LINKS
Conform NT1X89BA/BB configuration.
Verify physical link connectivity.
Verify interoffice facilities (from MTX to MDS).
1.0.4 RELIABLE DATA TRANSFER
Single/Dual link.
Abnormal Termination Recovery.
Verify that AMS to ACS transfer is enabled.
Clients (unfiltered/filtered).
C-5
1.0.5 GUI PERFORMANCE
Menu operation.
--------------- --------------
Buyer Seller
1.2 TEST CASES (AMS) (REFER TO NTPs 000-0000-000, 000-0000-000)
1. Confirm all relevant Switch datafill.
Verify physical connectivity from MTS to MDS.
NT1X89BA/BB: Verify cable is connected to correct port on MPC card.
Verify MPC is in shelf slot corresponding to datafill configuration.
WAN Connection: Confirm that WAN facilities are in place and active
(Cables connected to proper WAN ports, modems turned on, etc.).
Test Facilities: Set local/remote loopbacks and send test data.
2. Verify all GUI functionality. Examples are shown below.
A. Verify the following MDS GUI Configuration commands:
Configure, Edit, and Delete a Switch.
Configure, Edit, and Delete a Client.
Configure Switches and clients per specifications.
Verify Client filtering commands.
Verify reformatting commands.
Verify Topology Area is accurate.
B. Verify the following MDS GUI Performance Manager commands:
CPU Occupancy Tool.
Buffer Occupancy Tool.
C. Verify the following MDS GUI Fault Manager commands:
System Status.
Configuration of System Status Thresholds and Alarms.
D. Verify the following MDS GUI System Security commands:
Domain Maintenance.
User Maintenance.
Users can log in and access only configured domains.
3. Ensure MTX ability to transfer CDRs via two V.35 links, utilizing
the AFT/MNP protocol. Note that if CDRs are being transferred to
AMS,
C-6
AFT/MNP must be used for CDR transfer. If TMS (see CBS Section
below) transfer is needed AFT/MTP can be used, but AFT/MNP can be
used for TMSs only if CDR transfer is not required.
4. Verify error recovery functions.
AFT/MNP: Disable one of dual X.25 links and verify that CDRs
continue to flow to MDS. Recover link and verify that next file
begins using both links.
Links: Disable both X.25 links. Recover links and verify that data
transfer resumes at the point where it was disrupted.
Hardware: Disable MDS circuit packs (e.g. Pull ACC card). Restore
hardware and verify that transfer automatically restarts and no
CDR data is lost.
5. Verify that all available clients can receive data.
NOTE: Nortel cannot be responsible for Client availability unless
the Client is supplied by Nortel. Once Acceptance activities have
begun, they must be completed in a timely fashion, and Acceptance
cannot be refused solely because non-Nortel clients are
unavailable for verification.
6. Verify that the Client interface can recover in the event of a
failure.
NOTE: Nortel cannot be responsible for the recovery of a Client
application unless it is supplied by Nortel. The intent of this
test is to verify that the MDS interface (e.g. LAN connection)
will recover.
7. Verify transfer audit functions.
8. Verify the following MDS GUI Operations commands:
Start Processes.
Terminate Processes.
View Logs.
Client Transfer Control.
Queue Purge Functions.
MTX to MDS Queue Transfer Status.
9. If 9-track tape option is present, verify the following MDS GUI
Operations commands:
Tape In/Tape Out and Export/Import Optionally.
10. If the 9-track tape option is present, verify the following MDS
GUI tapeopr login commands:
Tape In/Tape Out operations once configured by Security Manager.
No other screens are available to tapeopr.
C-7
11. If 9-tract tape is not available, verify that AMA files can be
archived to Digital Audio Tape (DAT). Verify that the AMA files
can be restored from DAT to the AMS file buffer for re-processing.
---------- ----------
Buyer Seller
2.0 ACCOUNTING COLLECTION SERVICES (ACS) TEST PLAN (REFER TO NTP
411-2141-525)
2.1 AREAS OF TEST (ACS)
2.1.1 ACS CLIENT
Windows '95/3.1/Xterm.
2.1.2 CDR SEARCH
2.1.3 BASE PERFORMANCE
User Domain Management of Client Station.
Sybase Drivers.
Threshold Parameters.
2.1.4 GUI PERFORMANCE
Menu operation.
2.2 TEST CASES (ACS)
1. Verify DCDMON process is running.
2. Verify the following MDS GUI Configuration commands:
Configure and edit Client application preferences.
3. Verify the following MDS GUI Performance Manager commands:
CPY Occupancy Tool.
Query Database Occupancy.
4. Verify the following MDS GUI Fault Manager commands:
System Status.
Configuration of System Status Thresholds and Alarms.
5. Verify search application configuration:
SQLEDIT.
SYBPING.
C-8
6. Verify CDR search application:
Customer Service search.
Adhoc Reports.
CDR Browsing.
---------- ----------
Buyer Seller
3. CDPD BILLING SERVICE (CBS) TEST PLAN 3.1
3.1 AREAS OF TEST (CBS) (REFER TO NTP 411-2141-524)
CBS can be a standalone application or it can be included with AMS
and/or other applications. If CBS is included with AMS, many of the
tests below will have been performed in conjunction with AMS testing.
3.1.1 BASE PERFORMANCE
Switch site datafill.
UNIX site configuration.
Threshold Parameters.
3.1.2 LINKS
Confirm NT1X89BA configuration.
Verify physical link connectivity.
Verify interoffice facilities (from MTX to MDS).
3.1.3 RELIABLE DATA TRANSFER
Single/Dual link.
Abnormal Termination.
Client.
3.1.4 GUI PERFORMANCE
Menu operation.
3.2 TEST CASES (CBS)
1. Verify physical connectivity from MTX to MDS:
NT1X89BA/BB: Verify cable is connected to correct port on MPC
card. Verify MPS is in shelf slot corresponding to datafill
configuration.
Confirm all relevant Switch datafill.
WAN Connection: Confirm that WAN facilities are in place and
active (Cables connected to proper WAN ports, modems turned on,
etc.).
Test Facilities: Set remote loopbacks and send test data.
C-9
2. Verity the following MDS GUI Configuration commands:
Configure, Edit and Delete a Switch.
Configure, Edit and Delete a Client.
Configure Switches and Clients per specifications.
Verify Topology Area is accurate.
3. Verify the follwing MDS GUI Performance Manager commands:
CPU Occupancy Tool.
Buffer Occupancy Tool.
4. Verify the follwing MDS GUI Fault Manager commands:
System Status.
Configuration of System Status Thresholds and Alarms.
5. Verify the following MDS GUI System Security commands:
Domain Maintenance.
User Maintenance.
Users can log in and access only configured domains.
6. Ensure MTX ability to transfer Traffic Matrix Segment (TMS) blocks
via a single X.25 link, utilizing the AFT/MTP process. Note that if
CDRs are being transferred to AMS, AFT/MNP must be used for CDR
transfer. If TMS block transfer is needed AFT/MTP can be used, but
AFT/MNP can be used for TMSs only if CDR transfer is not required.
AFT/MTP can support only a single link per switch for TMS transfer.
7. Verify error recovery functions:
AFT/MNP: Disable X.25 link. Recover link and verify that TMS transfer
resumes to MDS.
Hardware: Disable MDS circuit packs (e.g. Pull ACC card). Restore
hardware and verify that transfer automatically restarts and no TMS data
is lost.
8. Verify that the CBS Client can receive data.
9. Verify that Client interface can recover in the event of a failure.
NOTE: Nortel cannot be responsible for the recovery of a Client
application unless it is supplied by Nortel. The intent of this test is
to verify that the MDS interface (e.g. LAN connection) will recover.
10. Verify that TMS Tape Archive (TAR) files can be stored to Digital Audio
Tape (DAT) for backup purposes, or for shipment to a billing
C-10
center. Verify that the TAR file can be restored to the CBS buffer for
re-processing.
11. Verify the following MDS GUI Operations commands:
Start Processes.
Terminate Processes.
View Logs.
Delete processed files from backup directory.
MTX to MDS Queue Transfer Status.
12. If 9-track tape option is present, verify the following MDS GUI
Operations commands: TapeIn and Import Optionally.
13. If the 9-track tape option is present, verify the following MDS GUI
tapeopr login commands:
TapeIn operations once configured by Security Manager.
No other screens are available to tapeopr.
----------------- --------------
Buyer Seller
Accepted:
--------------------------------- --------------
Buyer Date
C-11
SCHEDULE C (CONTINUED)
EXHIBIT C
MDS SAMPLE PROJECT SCHEDULE
Responsible
Week Milestone Event Party
---- --------------- -----------
1 P.O accepted by Seller Both
2 Review the CI Document input with Buyer Seller
3 Review Site Prep Requirements with Buyer Seller
4 Engineer and Order Equipment Seller
5 Ship Documentation to Buyer Seller
5 Establish Equipment Receipt and Buyer Both
Installation dates
10 Verify Site Prep has been completed (UPS, LAN, Both
Power, Modem Line, Data Ckts to other sites,
Client access [fraud, billing, etc.])
12 Installation Start Seller
13 Adjunct Platform Acceptance complete Both
C-12
