EXHIBIT 10.18
Metawave Communications Corporation/
GRUPO IUSACELL S.A. DE C.V.
Supply Agreement
Document Number # ______
Metawave Communications Corporation
00000 Xxxxxxx Xxxx X.X.
Xxxxxxx, XX 00000 XXX
Tel. 000.000.0000
Fax 000.000.0000
xxxx://xxx.xxxxxxxx.xxx
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
TABLE OF CONTENTS
SECTION TITLE PAGE
--------- ----------------------------------------- ----
1. AGREEMENT................................ 1
2. DEFINITIONS.............................. 1
3. PURCHASE ORDERS / CANCELLATIONS.......... 3
4. SHIPPING / TITLE / RISK OF LOSS.......... 4
5. INSTALLATION / TRAINING / DOCUMENTATION.. 5
6. INVOICES AND PAYMENT..................... 5
7. WARRANTY................................. 6
8. INFRINGEMENT INDEMNITY................... 7
9. INDEMNIFICATION.......................... 8
10. TERM AND TERMINATION..................... 9
11. ASSIGNMENT/LIMITATIONS ON TRANSFERS...... 9
12. NOTICES.................................. 9
13. INSURANCE................................ 10
14. COMPLIANCE WITH LAWS..................... 10
15. FORCE MAJEURE............................ 12
16. GOVERNING LAW / DISPUTE RESOLUTION....... 12
17. CONFIDENTIALITY.......................... 12
18. INTELLECTUAL PROPERTY.................... 12
19. GENERAL PROVISIONS....................... 13
Exhibit A - Products and Services Price List
Exhibit B - Commissioning Certificate
Exhibit C - Product Maintenance Program
Exhibit D - Software License
-i-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
Exhibit E - Engineering and Optimization Services Certificate
-ii-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
METAWAVE COMMUNICATIONS CORPORATION
SUPPLY AGREEMENT
THIS SUPPLY AGREEMENT (this "Agreement") is made as of this 17th day of
December, 1999 (the "Effective Date") between Metawave Communications
Corporation, a Delaware corporation ("Seller"), and Grupo IUSACELL S.A. de C.V.,
a Mexican corporation ("Customer").
The parties, in consideration of the mutual covenants, agreements and promises
of the other set forth in this Agreement and intending to be legally bound,
agree as follows:
1. AGREEMENT
Seller agrees to sell to Customer, and Customer agrees to purchase by
submitting a Purchase Order(s) to Seller, the Products and Services
identified on Exhibit A to this Agreement in accordance with the terms and
conditions hereof and at the Purchase Prices set forth in Exhibit A. Except
for the Initial Order Commitment contained in Exhibit A, it is expressly
understood and agreed that this Agreement is intended solely to establish
uniform and consistent terms and conditions for any Purchase Orders
Customer may choose to place with Seller and that Customer is not obligated
to place any Purchase Orders with Seller.
Notwithstanding any other provision of this Agreement or any other contract
between the parties to the contrary, the provisions of this Agreement shall
apply to all Purchase Orders for the Products and Services during the term
of this Agreement unless the parties expressly agree by written
modification to this Agreement that the provisions of this Agreement shall
not apply. Any additional or different terms in any acknowledgment,
confirmation, invoice, Purchase Order or other communication from one party
to the other shall be deemed objected to without need of further notice of
objection and shall be of no effect and not in any circumstance binding
upon either party unless expressly accepted by both parties in writing.
2. DEFINITIONS
As used in this Agreement, the following terms shall have the meanings set
forth below:
"Change Order" shall mean any subsequent change to a Purchase Order
initiated by either party and mutually agreed to by both parties in
writing, including but not limited to, changes due to Site configuration
and Products and Services needed at the Site.
"Commissioning" shall mean the procedures described in Seller's Product
system manual to place the Product into commercial service at a particular
Site. The completion of Commissioning is documented by Customer's signature
on the Commissioning Certificate attached hereto as Exhibit B. Both parties
agree to fulfill their respective
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
obligations defined in this Agreement to complete Commissioning at each
Site when Seller installs such Products.
"Engineering and Optimization Services" shall mean the engineering and
optimization services provided by Seller to optimize the Product at a Site
as described in Exhibit A. The completion of Engineering and Optimization
Services is documented by Customer's signature on the Engineering and
Optimization Services Certificate attached hereto as Exhibit E which shall
be signed by Customer no later than two weeks following completion of the
Engineering and Optimization Services.
[***]
"Product" or "Products" shall mean the SpotLight(R) 2000 spectrum
management system(s) or component(s) consisting of hardware and Software as
listed in Exhibit A or any additional product(s) set forth in any
amendments thereto as may be subsequently agreed to from time to time by
Seller and Customer.
"Purchase Order" shall mean any Purchase Order Customer may submit to
Seller for the purchase of the Products or Services which shall be subject
to the terms and conditions of this Agreement and which has been accepted
by Seller.
"Purchase Price" shall mean the price of the Products and the price of the
Services shown in Exhibit A or any other amount set forth in any amendments
to Exhibit A as may be subsequently agreed to from time to time by Seller
and Customer. All prices shown herein are in U.S. dollars.
"Services" shall mean installation, optimization, engineering or other
additional services set forth in Exhibit A or in any amendments to Exhibit
A as may be subsequently agreed to from time to time by Seller and
Customer.
"Site" shall mean each of the Customer cell site locations that Seller's
Products are installed.
"Site Survey" shall mean the survey of a Site performed by Seller to
determine the Product configuration and scope of Services required for the
proper installation and Commissioning of the Products.
"Software" shall mean the (i) object-code computer programs embedded in the
Products which control and monitor the operation of the Products ("Embedded
System Software"), and (ii) the PC-based graphical user interface computer
program for the Products, and all
-2-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
Features, Major Releases, Point Releases, and Software Patches (as such
terms are defined in "Product Maintenance Program" attached hereto as
Exhibit C), other updates and modifications to such Software (the "Software
Updates") and any documentation in support thereof.
"Software License" shall mean the licensing of the Software set forth in
Exhibit D, the terms of which shall apply to any Software purchased by
Customer from Seller pursuant to this Agreement.
3. PURCHASE ORDERS / CANCELLATIONS
a. Customer shall order Products and Services pursuant to this Agreement
by submitting a Purchase Order that provides the information specific
to the order, including but not limited to the quantity of Products
and Services to be ordered, delivery destination, the name and address
of the Customer's representative to whom the Products are to be
shipped at the delivery destination, the price of each Product and
Service per Exhibit A, the desired delivery date(s) and whether
partial shipments are acceptable. Purchase orders should be submitted
by Customer to Seller at least [***] prior to date of delivery of
Products or the rendering of Services.
b. Upon receipt of the Purchase Order, Seller shall have [***] business
days to accept or reject the Purchase Order in writing. Any
acceptances further subject to completion of Site Survey.
c. If following the completion of the Site Survey, Seller determines that
Product configurations or the Services set forth in the Purchase Order
must be changed, Seller shall notify Customer with a written proposal
for changes to the Purchase Order. Upon receipt, Customer shall have
[***] business days to accept or reject the written proposal for
changes. If accepted, Customer shall execute a written Change Order
to reflect the required changes identified by the Site Survey. If
Customer rejects the written proposal for changes Customer may cancel
the Purchase Order subject to Section 3(e) below.
d. At its sole option, Seller may decline to fulfill an Order if Seller
determines that (i) the costs associated with the sale of the Products
for the Sites are prohibitive or the conditions at such Sites are
unacceptable; (ii) the sale and delivery of the Products would
contravene Section 14(e) (export restrictions) of this Agreement; or
(iii) Seller's personnel may be exposed to unsafe conditions.
e. Customer may cancel or delay delivery of Products contained in any
Purchase Order or Change Order prior to Seller's shipment of the
Products subject to the terms herein. Any such cancellation or delay
must be made by written notification to Seller. Customer may delay the
delivery date for any Products on any purchase Order or Change Order
once, and such delay shall not exceed [***] days. If Customer directs
such cancellation or delay with less than
-3-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
[***] written notice from the delivery date specified in Purchase
Order or Change Order, Customer shall pay to Seller reasonable and
documented nonrecurring costs, if any, associated with such
cancellation or delay provide however, that any such costs shall not
exceed in the [***] of the Purchase Price of each canceled or delayed
Products.
f. During the period of time commencing on or before the effective date
of this Agreement and [***], Customer agrees to order from Seller
[***]
4. SHIPPING / TITLE / RISK OF LOSS
a. Subject to Section 3, Seller shall ship in accordance with Seller's
standard shipping practices all Products to Customer's designated
representative at the designated delivery destination on or before the
delivery date(s) specified in a Purchase Order. [***]
b. Seller shall arrange, on behalf of Customer the following items: [***]
Customer shall reimburse Seller at cost for [***] Seller shall
separately invoice Customer for such charges in accordance with
Section 6 herein.
c. Products shall be packed by Seller in containers adequate to prevent
damage during reasonable shipping, handling and storage. Customer
shall be responsible for payment of any warehousing. or storage
charges for the Products following delivery of the Products to
Customer, except as noted in paragraph 4(a), above.
d. Title to and risk of loss or damage to Products sold by Seller to
Customer hereunder shall pass to Customer upon delivery to Customer's
representative at the delivery destination specified on the Purchase
Order. Title to Software shall remain with Seller in all cases
pursuant to the terms of the Software License attached as Exhibit D
hereto.
-4-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
5. INSTALLATION / TRAINING / DOCUMENTATION
a. Seller shall install and commission each Product in accordance with a
mutually agreed upon deployment schedule. Customer agrees to furnish
reasonable access to the cell sites and the necessary resources to
assist Seller during installation and optimization. Such deployment
schedule shall be agreed to in writing by Seller and Customer.
b. If Seller fails to complete installation and commissioning of a
Product within the specified deadline (or any extension agreed to in
writing by the parties), and such failure is due to delays or causes
within the reasonable control of Seller, then Seller will not charge
Customer for the installation and commissioning of that Product at the
designated site. In the event of any delay beyond the reasonable
control of Seller, the date(s) of installation and commissioning shall
be extended for as many days as are reasonably required due to the
delay.
c. Product training courses will be offered at Seller's offices in
Redmond, WA or on site in Mexico by mutual agreement the prices listed
in Exhibit A. If Seller conducts training on site in Mexico, [***]
The course schedule and availability will be coordinated with Seller's
training organization. Seller will provide at no cost to Customer one
set of manuals and documentation with each Product.
6. INVOICES AND PAYMENT
a. For Product to be installed by Seller, Seller shall render invoices to
Customer as follows: [***]
-5-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
b. All invoices shall be computed on the basis of the prices set forth in
Exhibit A [***] and shall separately identify categories of charges,
including but not limited o quantities of Products, type of Services,
total amounts for each item, shipping charges, applicable sales or use
taxes and total amount due in U.S. dollars. Customer shall promptly
pay Seller the amount due within thirty (30) days of the date of
invoice. Customer shall pay a late fee at the rate of one and one-half
percent (1.5%) of the amount due for each month or portion thereof
that the amount remains unpaid.
c. The prices specified in Exhibit A do not include any taxes. Customer
shall pay all local and government sales, excise, or any other taxes,
fees, duties, tariffs, or other governmental charges or customs
processing fees which may be levied upon the use, sale, transfer of
ownership, or installation of Product or Services purchased hereunder
or the import, movement, delivery, possession of Products, including
the replacement and repair of Products, excluding, however, any taxes
on the income, business or licenses of Seller. Any such taxes or fees
required to be paid or collected by Seller shall be added to the
invoice as separate charges and paid by Customer to Seller unless
Customer provides Seller with proof of exemption acceptable to the
appropriate authority.
d. Payment shall be made by wire transfer in U.S. dollars to the
following account:
Imperial Bank
0000 Xxxxxxxxx Xxxxx Xxxx.
Xxxxxxx Xxxxx, XX 00000
Attn: Merchant Banking Group
ABA: 000000000
Swift: 1MPUS66
Account Number: 36-001348
Account Name: Metawave Communications Corporation
7. WARRANTY
a. Seller warrants the Products for a period of [***] ("Warranty
Period"). During the Warranty Period, Seller warrants that (i) all
Products furnished hereunder will be free from defects in materials,
workmanship and title; (ii) all Products as delivered and properly
installed and operated will function substantially as described in the
user documentation and specifications provided by Seller; and (iii)
the media on which the Software is contained will be free from defects
in material and workmanship under normal use. THE WARRANTIES IN THIS
AGREEMENT ARE GIVEN IN LIEU OF
-6-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
ALL OTHER WARRANTIES EXPRESS OR IMPLIED WHICH ARE
SPECIFICALLY EXCLUDED, INCLUDING, WITHOUT LIMITATION,
IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE.
b. Customer and Seller shall handle all warranty claims in accordance
with the procedures set forth in Exhibit C, the Product Maintenance
Program. The actions taken by Seller under the Product Maintenance
Program procedures shall be the full extent of Seller's liability and
Customer's exclusive remedy with respect to a claim under this Section
7. The supplied Products provided hereunder by Seller to Customer (i)
shall perform on and after January 1, 2000 in as good a manner as
before such date, and (ii) shall at all times manage, manipulate and
report data involving dates (including the year 2000, dates before and
after the year 2000, and single-century and multi-century formulas)
without generating incorrect values or dates or causing an abnormally-
ending scenario within an application.
c. This warranty does not apply to any claim which arises out of any of
the following: (i) the Product is used in other than its normal and
customary manner; (ii) the Product has been subject to misuse,
accident, neglect or damage by Customer; (iii) the Product has been
installed, optimized or moved from its original installation site by
any person other than Seller or a person who has been certified by
Seller through completion of a Seller-sponsored training course to
provide such services; (iv) unauthorized alterations or repairs have
been made to the Product, or parts have been used in the Product which
are not approved by Seller; (v) the Product is not maintained pursuant
to Seller's Maintenance Programs or under the supervision of a person
who has been certified by Seller to provide such maintenance service
through completion of a Seller-sponsored training course; (vi) an
event of Force Majeure has occurred; (vii) the failure of third party
antennas, antenna lines or interconnection facilities not provided by
Seller at the Site.
8. INFRINGEMENT INDEMNITY
a. Seller shall indemnify and hold harmless Customer against any and all
liabilities, losses, costs, damages and expenses, including reasonable
attorney's fees, associated with any claim or action for actual or
alleged infringement by any Product or Software supplied in accordance
with this Agreement of any United States patent, trademark, copyright,
trade secret or other intellectual property right incurred by Customer
as a result of Customer's use of such Products or Software in
accordance with this Agreement provided that (i) Customer promptly
notifies Seller in writing of the claim; (ii) Customer gives Seller
full opportunity and authority to assume sole control of the defense
and all related settlement negotiations; and (iii) Customer gives
Seller information and assistance for the defense (Customer will be
reimbursed for reasonable costs and expenses incurred in rendering
such assistance, against receipt of invoices therefor). Subject to the
conditions and limitations of liability stated in section 9(b) of this
Agreement,
-7-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
Seller shall indemnify and hold harmless Customer from all payments,
which by final judgments in such claims, may be assessed against
Customer on account of such alleged infringement and shall pay
resulting settlements, costs and damages finally awarded against
Customer by a court of law, arbitration or other adjudication of the
claim.
b. Customer agrees that if the Products or Software become, or in
Seller's opinion are likely to become, the subject of such a claim,
Customer will permit Seller, at Seller's option and expense, either to
procure the right for Customer to continue using such Products or
Software or to replace or modify same so that they become non-
infringing as long as they continue to conform in all material
respects to the Product specifications, and, if neither of the
foregoing alternatives is available on terms that are acceptable to
Seller, Customer shall at the written request of Seller, return the
infringing or potentially infringing Products or Software and all the
rights thereto at Seller's expense. Customer shall receive a refund of
the prorated undepreciated portion of the Purchase Price actually paid
by Customer to Seller for the returned portion of the Products. The
Purchase Price shall be depreciated over a five (5) year period.
c. Seller shall have no obligation to Customer with respect to any claim
of patent or copyright infringement which is based upon (i) adherence
to specifications, designs or instructions furnished by Customer; (ii)
the combination, operation or use of any Products supplied hereunder
with products, software or data with which the Products are not
intended to be used or for which the Products are not designed; (iii)
the alteration of the Products or modification of any Software made by
any party other than Seller; or (iv) the Customer's use of a
superseded or altered release of some or all of the Software if
infringement would have been avoided by the use of a subsequent
unaltered release of the Software that is provided to the Customer.
9. INDEMNIFICATION
a. Seller, shall indemnify Customer, its employees and directors, and
each -of them, against any loss, damage, claim, or liability, arising
out of, as a result of, or in connection with the use of the Product
in accordance with this Agreement or the acts or omissions, negligent
or otherwise, of Seller in the performance of this Agreement, or a
contractor or an agent of Seller or an employee of anyone of them,
except where such loss, damage, claim, or liability arises from the
negligence or willful misconduct of Customer, agents or its employees.
Seller shall, at its own expense, defend any suit asserting a claim
for any loss, damage or liability specified above, and Seller shall
pay. any costs, expenses and attorneys' fees that may be incurred by
Customer in connection with any such claim or suit or in enforcing the
indemnity granted above, provided that Seller is given (i) prompt
notice of any such claim or suit and (ii) full opportunity to assume
control of the defense or settlement.
-8-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
b. In no event will either party or their respective suppliers be liable
under this Agreement for (i) the cost. of substitute procurement,
special, indirect, incidental, or consequential damages, or (ii) any
damages resulting from the loss of use or profits arising out of or in
connection with this Agreement, the furnishing of Services, or the use
or performance of Products even if informed of the possibility of such
damages. Except for damages resulting from bodily injury or death to
persons, in no event will Seller's total liability for (i) any damages
in any action based on or arising out of or in connection with this
Agreement exceed the total amount paid to Seller for such Products
under this Agreement, or (ii) claims based upon Seller's obligations
for Services exceed the total amount paid to Seller for such Services.
10. TERM AND TERMINATION
The term of this Agreement shall be [***] from the Effective Date. Either
party may terminate this Agreement at any time with thirty (30) days'
notice in which case Customer shall have the right to place Purchase Orders
up until the effective date of the termination and such termination shall
not affect any purchase order outstanding as of the effective date of the
termination. If either party is in material default of any of its
obligations under this Agreement and such default continues for thirty (30)
days after written notice thereof by the party not in default, the
nondefaulting party may terminate this Agreement. In addition, a party may
terminate this Agreement if a petition in bankruptcy or a petition under
any insolvency law is filed by or against the other party and is not
dismissed within sixty (60) days of the commencement thereof. Any notice of
termination under this section 10 shall be in writing.
11. ASSIGNMENT/LIMITATIONS ON TRANSFERS
a. Any assignment by either party to this Agreement or any other interest
hereunder without the other party's prior written consent, shall be
void, except assignment to a parent company, subsidiary or person or
entity who acquires all or substantially all of the assets, business
or stock of either party, whether by sale, merger or otherwise.
b. Customer shall not purchase a Product solely for the purpose of
reselling or distributing it to another party.
c. Subject to the provisions of paragraphs a and b above, this Agreement
shall inure to the benefit of and be binding upon the respective
successors and assigns, if any, of the parties hereto.
12. NOTICES
Except as otherwise specified in this Agreement, all notices or other
communications hereunder shall be deemed to have been duly given when made
in writing and delivered in person or deposited in the United States mail,
postage prepaid, certified mail, return
-9-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
receipt requested, or by a reputable overnight courier service providing
proof of delivery, or by confirmed facsimile transmission and addressed as
follows:
To Seller: To Customer:
Metawave Communications Corporation Grupo Iusacell S.A. de C.V.
00000 Xxxxxxx Xxxx XX Avenida Prolongacion, Paseo de la
Xxxxxxx, XX 00000 Xxxxxxx Xxxxxxx Xxxxx Xx 00000
Xxxxxx D.F.
Attn: Xxxxxxx Xxxxxxxxx, VP, Sales Attn: Xxxxxx X. Xxxxxx
Fax: 000 000 0000 Fax: 00-0-000-0000
Copy to: Xxxxx Xxxxxx-Xxxxx Copy to: Xxxxx Xxxxxxxxxx
General Counsel General Counsel
Fax: 000-000-0000 Fax: 00-0-000-0000
The address to which notices or communications may be given to either party
may be changed by written notice given by such party to the other pursuant
to this Section 11.
13. INSURANCE
Seller agrees at its expense to maintain adequate insurance coverage to
protect against its liabilities under this Agreement. Insurance coverage
will include (a) worker's compensation insurance; (b) comprehensive general
liability insurance, including coverage for product liability, bodily
injury and property damage; and (c) automobile liability insurance.
14. COMPLIANCE WITH LAWS
a. Each party shall comply with all applicable federal, state and local
laws, regulations and codes, including the procurement of permits and
licenses relating to the purchase or sale of Product and Services
pursuant to this Agreement.
b. Seller agrees to obtain all necessary Mexican telecommunication
authorizations, certifications, permits or licenses as required for
the installation and operation of the Products and for which Seller is
responsible for under Mexican. law or regulations(the "Licenses").
Customer shall provide consultation or upon request from Seller,
reasonable assistance in the form of personnel, expertise and contacts
to Seller (other than financial assistance) in obtaining the Licenses,
customs clearances (subject to section 4(c)), visas, permits, work
permits, temporary import/export permits for tools and test equipment,
and any other required documentation required for the importation,
installation and operation of the Products in Mexico.
c. When Customer imports the Products into Mexico, Customer shall comply
with all importation formalities and obtain any customs or regulatory
permits required to import the Products into Mexico, including but not
limited to, NOM certificates
-10-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
issued by NYCE relating to compliance with electrical safety standards
(the "NYCE Certificate"). Seller agrees to indemnify Customer, its
employees and directors, and each of them, against any loss, damage,
claim, or liability, arising out of, as a result of, or in connection
with the issuance of the NYCE Certificate to, and the holding or
maintenance of the NYCE Certificate by, Customer except where such
loss, damage, claim, or liability arises from the negligence or
willful misconduct of Customer, agents or its employees. Seller shall,
at its own expense, defend any suit asserting a claim for any loss,
damage or liability specified above, and Seller shall pay any costs,
expenses and attorneys' fees that may be incurred by Customer in
connection with any such claim or suit or in enforcing the indemnity
granted above, provided that Seller is given (i) prompt notice of any
such claim or suit and (ii) full opportunity to assume control of the
defense or settlement.
In addition, Seller shall be responsible for maintaining the Products'
compliance with applicable NOM standards and for conducting additional
testing if needed `to maintain the NYCE Certificate. Customer and
Seller agree that the NYCE certificate shall only be used by Customer
as the importer of Products for its own use, and that Seller shall not
rely on the NYCE certificate issued to Customer for importation on
behalf of Seller or any other purchaser of the Products in Mexico.
d. Customer agrees that Seller may conduct testing for purposes of
obtaining any Licenses for the Products at the Sites where they are
installed and will allow Seller access to the Sites at times
acceptable to Customer for such purposes during installation and
afterwards if requested by Seller.
e. The parties agree to comply with all applicable U.S. and Mexican
export control laws and regulations and shall not export or re-export
any technical data or products except in compliance with the
applicable export control laws and regulations of the U.S. and Mexico.
-11-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
15. FORCE MAJEURE
Except for payment of moneys due, neither party shall be liable for delays
in delivery or performance or for failure to manufacture, deliver or
perform resulting from acts beyond the reasonable control of the party
responsible for performance. Such acts shall include, but not be limited to
(a) acts of God, acts of a public enemy, acts or failures to act by the
other party, acts of civil or military authority, governmental priorities,
strikes or other labor disturbances, hurricanes, earthquakes, fires,
floods, epidemics, embargoes, war, riots, and loss or damage to goods in
transit; (b) inability to obtain necessary products, components, services
or facilities on account of causes beyond the reasonable control of the
delayed party or its suppliers; or (c) delay in obtaining or the failure to
obtain the necessary customs clearances, equipment authorizations,
licenses, permits, governmental approvals and any other documentation
required for the delivery, installation and operation of the Products at
the Sites, including visas and work permits for Seller's personnel. In the
event of any such delay, the date(s) of delivery or performance shall be
extended for as many days are reasonably required due to the delay. If such
delay continues for forty-five (45) days, either party may terminate the
Purchase Order affected by the event by providing written notice.
16. GOVERNING LAW / DISPUTE RESOLUTION
a. This Agreement and each Purchase Order shall be construed in
accordance with the internal laws of the State of New York, without
regard to its choice of law provisions. The terms and conditions of
the United Nations Convention CISG are excluded from application under
this Agreement.
b. Any dispute, controversy, or claim arising out of or relating to this
Agreement shall first be settled by non-binding mediation to be
conducted in English by a mutually agreed non-affiliated neutral
party. In the event mediation is unsuccessful, the matter shall be
settled by binding arbitration in New York, New York, under the rules
of the International Chamber of Commerce in effect at the time of the
arbitration to be conducted in English. The arbitration decision shall
be final and binding upon the parties and judgment upon the award
rendered by the arbitrator may be entered in any court having
jurisdiction thereof. Notwithstanding the above, regarding
intellectual property claims, Metawave reserves the right to initiate
and conduct litigation proceedings in any court it deems appropriate.
17. CONFIDENTIALITY
All information, data and materials provided by either party pursuant to
this Supply Agreement will be subject to the terms and conditions of the
Non-disclosure Agreement between Metawave and IUSACELL, dated May 19, 1999.
18. INTELLECTUAL PROPERTY
-12-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
All concepts, designs, ideas, techniques, software programs, inventions,
discoveries, data, business processes, business procedures and any other
intellectual property developed by Seller in connection with this
Agreement, or arising out of its performance of this Agreement, shall be
the exclusive property of Seller. The performance by Seller of its
obligations under this Agreement shall not be deemed work-for-hire but
shall instead be subject to this section.
19. GENERAL PROVISIONS
a. Seller and Customer may agree to issue a joint press release
concerning the execution of this Agreement. Such press release shall
be subject to prior review and written approval by both parties, such
approval not to be unreasonably withheld.
b. Any waiver by any party of any breach or failure to comply with any
provision of this Agreement by the other party must be in writing and
shall not be construed as, or constitute, a continuing waiver of such
provision, or a waiver of any other provision of this Agreement.
c. If any of the provisions of this Agreement shall be invalid or
unenforceable, such invalidity or unenforceability shall not
invalidate or render unenforceable the entire Agreement, but rather
the entire Agreement shall be construed as if not containing the
particular invalid or unenforceable provisions, and the rights and
obligations of Seller and Customer shall be construed and enforced
accordingly.
d. Except the Non-Disclosure Agreement dated May 19, 1999 which shall
remain in full force and effect, this Agreement, including all
Exhibits that are attached to and hereby incorporated into this
Agreement, shall constitute the entire agreement between Customer and
Seller with respect to the subject matter hereof and supersedes all
prior agreements, covenants, arrangements, communications,
representations or warranties, whether oral or written, by any party
or any officer, employee or representative of any party with respect
to the subject matter hereof. Upon certification by Customer of
performance acceptance of the Products purchased pursuant to the
Letter Agreement between Seller and Customer dated June 29, 1999 (the
"Initial Order"), such Letter Agreement shall be terminated and the
terms and conditions of this Agreement shall apply to the Initial
Order as if the Initial Order were a Purchase Order under this
Agreement. In addition, all outstanding Purchase Orders from Customer
and all Products sold to Customer by Seller as of the Effective Date
of this Agreement shall be subject to this Agreement, which shall
supersede and replace any additional or different terms of those
Purchase Orders or other order documentation.
e. Any amendment or modification of this Agreement or any Exhibit must be
in writing and signed by a duly authorized representative of each of
the parties.
-13-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
f. This Agreement applies only to sales of Products and Services to be
installed at Customer Sites in Mexico.'
IN WITNESS WHEREOF, the parties hereto have caused this Agreement to be executed
by their respective duly authorized representatives.
Metawave Communications Corporation Grupo IUSACELL S.A. de C.V.
By: /s/: Xxxxxxx Xxxxxxxxx By: /s/: Xxxxxx Xxxxxx
------------------------ ------------------
Name: Xxxxxxx Xxxxxxxxx Name: Xxxxxx Xxxxxx
------------------------ ------------------
Title: VP Sales and Marketing Title: VP Network
------------------------ ------------------
-14-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
Exhibit A
1. Product Pricing Summary
All Product prices shown are list prices and unless other wise indicated do
not include Services, taxes, shipping and duties. Services prices shown are
for Product installed and services performed in the Mexico.
[***]
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
2. Optional Software Pricing Summary
[***]
3. Services Pricing Summary
[***]
4. Maintenance Pricing
[***]
-2-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
5. Training
Supplier offers SpotLight training courses designed for the cellular
technician. The content of the courses shall include but not be limited to
site preparation, installation, remedial maintenance, failure
recovery/backup, failure repair techniques, operation of test equipment and
diagnostic software use. The content of said courses may be changed by
Supplier when, in its judgement, such change is warranted, the current
course offered is three (3) days in length. The courses assume no prior
knowledge of SpotLight systems but do require a proficient level of
understanding of cellular system operation, installation and optimization.
Supplier shall provide sufficient personnel to conduct each course and
shall furnish instructional aids including manuals.
The training courses will be conducted at Supplier's offices located in
Redmond, Washington [***]. The price for attending the training course is
[***]. Course schedules and availability will vary and shall be coordinated
through Supplier's training organization.
6. General Conditions for Order
6.1 Towers and transmission lines to the towers, or any costs associated
with the preparation of towers and the cell site including adequate
electrical power and HVAC are not included in the prices shown herein
and are the responsibility of Customer.
6.2 The mounting, physical and electrical connection of the SpotLight
panel antennas is not included in the prices shown herein and is the
responsibility of Customer.
6.3 Customer shall provide air time with local phone numbers at no charge
and/or a reasonable number of test mobiles at no charge if required by
Supplier for completion of services including Installation,
Commissioning and Optimization of the Product.
6.4 Site surveys must be completed to determine the final Product
configurations and to complete the scope of work. If upon completion
of the site survey and scope of work, it is determined that the
Product requirements have changed, Supplier shall notify Customer with
a written proposal for changes to the Purchase Order.
6.5 Customer shall provide safe and secure access to the sites for
Supplier's employees during the performance of Services. Customer
shall make each site available to Supplier during a mutually agreed
upon period of time.
6.6 Customer is responsible for maintaining proper site environmental
conditions and proper grounding of Supplier's equipment including
proper lightening protection.
6.7 Customer shall provide, at Supplier's reasonable request, cell site
data necessary for the performance of Services including database
information, baseline network statistics, call traffic and performance
levels and revisions levels of cell site infrastructure hardware and
software. All such information provided by Customer shall be treated
as confidential Information in accordance with this Agreement.
-3-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
6.8 If performance of Services by Supplier is delayed for reasons beyond
the control of Supplier, or if additional Services are required by
Customer, the prices for Services shown herein may be adjusted
accordingly.
6.9 Performance of the Services set forth herein is dependent on Customer
and/or Supplier obtaining any and all necessary licenses, permits and
governmental approvals required to perform the Service. Supplier shall
not be held liable for any non-performance due to delays in obtaining
any of the above documentation and/or approvals.
-4-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
7. [***]
The prices shown in this Exhibit A are given in consideration of Customer's
[*] set forth in this Section 7.
[***]
-5-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
Region #9
[***]
-6-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
Exhibit B
Commissioning Certificate
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
[***]
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
Exhibit C
Product Maintenance Program
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
1. INTRODUCTION
Seller's product maintenance program includes both a Hardware Maintenance
Program (HMP) and a Software Maintenance Program (SMP). This document
describes each of the two programs.
2. HARDWARE MAINTENANCE PROGRAM (HMP)
Seller repairs its Product(s) down to the Field Replaceable Unit (FRU). In
this Exhibit C, the term hardware refers to the non-Software components
making up a FRU. The following describes Seller's Hardware Maintenance
Program ("HMP"):
2.1. Term
21.1. Seller's HMP is included in the Purchase Price of each Product
purchased by Customer and shall extend throughout the duration
of the Warranty Period, as set forth in the Warranty Section of
the Agreement (the "Initial HMP"). Hardware repair services are
made available to Customer for a period of [***] from the date
Product is shipped from Seller's factory to Customer. Following
the expiration of the Initial HMP, Customer has a choice of (i)
subscribing to Seller's HMP on an annual basis pursuant to the
terms herein and at the HMP fees set forth in Exhibit A
("Extended HMP") for the duration of the term of the Agreement
and thereafter at Seller's then current HMP fees, or (ii)
having defective FRUs repaired or replaced with refurbished
FRUs at Seller's then current repair rates.
2.2. Seller shall:
2.2.1. If a defect occurs, either (i) repair the defective FRU or
(ii) replace said FRU with a new or refurbished FRU. Any item
replaced will be deemed to be on an exchange basis, and any
item retained by Seller through replacement will become the
property of Seller.
2.2.2. FRUs that have been repaired or replaced will be warranted for
a period of time which is the longer of (i) [***] from the
date of shipment of FRU to Customer or (ii) [***].
2.2.3. At the request of Customer and if an emergency situation
exists and requires an expedited shipment, Seller shall ship a
replacement FRU in advance of Customer returning the defective
FRU to Seller.
2.2.4. In a non-emergency situation, Seller shall ship a repaired or
replacement FRU to Customer within [***] days of receipt of a
defective FRU from Customer. Equipment not manufactured by
Seller will be repaired or replaced as promptly as
arrangements with the manufacturers or vendors thereof permit.
-2-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
2.2.5. Issue a Return Material Authorization ("RMA") number to
Customer prior to Customer's return of the defective FRU.
2.2.6. Pay all transportation charges for the return of the repaired
or replacement FRU to Customer.
2.2.7. Provide telephone technical support 24 hours a day, 7 days a
week with a telephone call-back response time to Customer not
to exceed one hour from Customer's call to Customer Support.
2.3. Customer shall:
2.3.1. Contact Seller via telephone, e-mail or fax to obtain an RMA
prior to returning a defective FRU.
2.3.2. Package FRU in a manner to prevent damage during shipment and
clearly identify RMA number on outside of package.
2.3.3. Ship the defective FRU to the address shown in Annex A to this
exhibit.
2.3.4. Pay all costs of transportation for sending the defective FRU
to Seller.
2.3.5. If Seller has shipped a replacement FRU in advance of Customer
returning a defective FRU to Seller, as a result of an
emergency situation that required an expedited shipment,
Customer agrees to provide confirmation of shipment of such
defective FRU, freight prepaid, to Seller (at address shown in
Annex A to this exhibit) within 5 days of Seller's shipment of
replacement FRU. Customer agrees to promptly pay Seller's
invoice for the replacement FRU (billed at the then current
FRU price) shipped to Customer if the defective FRU is not
returned to Seller within the specified 5 day period.
2.3.6. Be responsible for the initial identification of Product
problems down to the FRU level and for the removal, shipment
and re-installation of the malfunctioning FRU.
2.4. On-Site Repair
On-Site Repair can be performed at an additional charge. Such charge
will be quoted to Customer and agreed upon in writing prior to
dispatch of service personnel.
2.5. Service Limitations
-3-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
2.5.1. Seller shall have no responsibility to repair or replace FRUs
which have been repaired or altered in an unauthorized manner
or which have had the bar code, serial number, or other
identifying xxxx modified, removed or obliterated through
action or inaction of Customer.
2.5.2. In the event that Customer sends a FRU to Seller for which no
defects or failures can be found, Seller may invoice Customer
at the then current fee for the services rendered during the
evaluation process.
3. SOFTWARE MAINTENANCE PROGRAM (SMP)
The following describes Seller's SMP:
3.1. Definitions Terms which are capitalized have the meanings set forth
below or, absent definition herein, as contained in the Agreement.
Feature An innovation or performance improvement to Software that
is made available to all users of the current Software
release. Features are licensed to Customer individually
and may be at additional cost.
Major Release Indicates a new version of Software that adds new Features
(excluding Optional Features) or major enhancements to the
currently existing release of Software.
Point Release Indicates a modification to Software resulting from
planned revisions to the current release, or corrections
and/or fixes to the current release of Software.
Software Patch Software that corrects or removes a reproducible anomaly
or "bug" in an existing Major Release.
3.2. Term
3.2.1. Seller's SMP is included in the Purchase Price of each Product
purchased by Customer and shall extend throughout the duration
of the Warranty Period, as set forth in the Warranty Section
of the Agreement (the "Initial SMP Term"). Thereafter, SMP is
provided by Seller to Customer pursuant to the terms herein
and is included in the SMP fees set forth in Exhibit A for a
period of 12 months. Any Software provided to Customer during
the term of the SMP will be provided pursuant to Seller's
Software License as set forth in the Software License exhibit
of the Purchase Agreement.
3.3. Scope
-4-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
3.3.1. During the term of SMP, all Major Releases, Point Releases,
Software Patches and standard Features made generally
available by Seller shall be available to Customer at no
additional charge. Customer shall install such Software
promptly upon receipt.
3.3.2. Optional Features and certain significant enhancements shall
be made available to Customer at an additional charge.
3.3.3 Certain optional Features shall be sold on a per-unit basis
and may have price levels that reflect unit capacity.
3.3.4 Customer will be responsible for problem identification of
reproducible Software malfunctions. In the event of any such
Software malfunction, Customer shall notify Seller promptly of
the failure through calling Seller's Customer Support.
3.3.5 Seller shall provide, at a Seller authorized repair depot,
such service as is necessary to correct Software defects. Such
service will be provided by Seller as soon as is possible and
on a priority basis according to the severity of the problem.
3.3.6. Seller shall provide telephone technical support 24-hour a
day, 7 days a week with a telephone call-back response time to
Customer not to exceed one hour from Customer's call to
Customer Support. Additionally, Seller shall provide telephone
assistance and guidance during the installation of new
Software.
3.3.7. Seller shall support the current Major Release and associated
Point Releases and Features as well as the immediately
preceding Major Release and associated Point Releases and
Features.
3.3.8. Seller shall have no obligation to support any Software that
is older than the immediately preceding Major Release.
However, any support provided by Seller for Software older
than the immediately preceding Major Release and associated
Point Releases and Features shall be on a time and material
basis. An open purchase order will be required before any such
services are rendered.
3.3.9. Seller shall perform its services hereunder in a good
workmanlike manner and in accordance with industry standards
where applicable.
-5-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
Annex A: Procedures for Metawave's Hardware Maintenance Program
A. Metawave's Customer Support Customer Support
Customer Support can be reached by call the following numbers:
Domestic phone: 000-000-0000
International phone: 000-000-0000
Fax: 000 000 0000
Email: xxxxxxx@xxxxxxxx.xxx
B. Return Material Authorization (RMA)
Customer must contact Customer Support via telephone, e-mail or fax to
obtain a Return Material Authorization (RMA) number. Seller may return
shipments without a RMA number to the Customer unrepaired and at Customer's
expense.
The RMA number must be clearly written on the outside of the package.
A RMA number will not be issued until a purchase order is provided for the
repair price for those items not covered under warranty.
C. Return Address
All Field Replaceable Units (FRUs) must be shipped to:
Metawave Communications Corporation
00000 Xxxxxxx Xxxx X.X.
Xxxxxxx, XX 00000-0000 XXX
D. Packing Instructions
Customer must pack all returned equipment in a manner no less protective to
such equipment than the manner in which Seller packages similar equipment.
E. Repair Purchase Orders
Repair purchase orders are required in the following instances:
1. When Customer returns out of warranty FRUs for repair.
2. When Seller sends pre-exchange FRU to Customer prior to the defective
FRU being received by Seller, and if defective FRU is not received
within five (5) days of shipment of replacement FRU.
Under these circumstances, a facsimile copy of the purchase order may be
transmitted to Seller and followed-up by a confirming hard copy in the
mail.
F. Expedited Service
In an emergency situation that requires an expedited shipment, Seller
offers Expedite Services upon Customer's request at no additional charge
except that Customer shall pay for additional expedited freight charges, if
any. If the HMP
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
has expired, such expedite service will carry an additional fee of $300
plus freight charges (plus the price of FRU if out of warranty) per FRU.
G. Invoices and Payment
Invoices are payable in accordance with the terms of the Agreement. If
pre-exchanged FRU's are not returned by Customer to Seller within five (5)
days then Seller shall invoice Customer for the amount of the exchanged
FRU's.
H. Freight
FRUs covered under Initial HMP or Extended HMP:
Customer shall ship the FRU to Seller on a prepaid basis and Seller will
return the FRU to Customer on a prepaid basis, not billing Customer for
return freight.
FRUs out of Warranty:
Customer shall ship the FRU to Seller on a prepaid basis and Seller will
utilize the freight carrier number furnished by Customer for return
freight.
I. Duties and Taxes
All duties, customs clearance fees and any and all taxes will be the
responsibility of the Customer.
J. Non-compliance
Failure to comply with any of the procedures may result in delay or non-delivery
of the FRUs.
-2-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
Exhibit D
Software License
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
1. DEFINITIONS
For the purposes of uniformity and brevity, references to Agreement or to
an Exhibit shall refer to the Agreement that this document is attached as
Exhibit D and to the other Exhibits to that Agreement. All definitions set
forth in the Agreement shall apply hereto unless otherwise expressly
defined herein.
2. SCOPE
Pursuant to the Agreement, Software will be delivered by Seller to Customer
for use with a Product according to the terms of the Agreement and this
Exhibit. Customer shall then become a licensee with respect to such
Software.
3. LICENSING GRANT
3.1. Concurrent with execution of the Agreement, and subject to the terms
and conditions set forth herein, Seller grants to Customer a
revocable, non-exclusive and non-transferable license under Seller's
applicable proprietary rights to use Software delivered to Customer
hereunder to routinely operate and monitor the Product with which the
Software was delivered.
3.2. The Software licensing fees for the most current versions of the
Software including the Embedded System Software and LampLighter
Software (available at the time of purchase of a Product) are included
in the Purchase Price of a Product. Software Updates are available
under the Software Maintenance Program described in Exhibit C or for
additional licensing fees.
4. LIMITATIONS ON USE OF SOFTWARE
4.1. Without the prior written consent of Seller, Customer shall only use
the Software in conjunction with a single Product delivered to
Customer under the terms of the Agreement.
4.2. The license granted to Customer in Section 3 may not be transferred to
another Product or Site or another entity without the written consent
of Seller.
4.3. The Software is subject to laws protecting patents, trade secrets,
know-how, confidentiality and copyright.
4.4. Customer shall not translate, modify, adapt, decompile, disassemble,
or reverse engineer the Software or any portion thereof.
4.5. Unless otherwise expressly agreed to by Seller, Customer shall not
permit its directors, officers, employees or any other person under
its direct or indirect control, to write, develop, produce, sell, or
license any software that performs the same functions as the Software
by means directly attributable to access to the Software (e.g. reverse
engineering or copying).
-2-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
4.6. Customer shall not export the Software from the United States without
the written permission of Seller. If written permission is granted for
export of the Software, then Customer shall comply with all U.S. laws
and regulations for such exports and shall hold Seller harmless,
including legal fees and expenses for any violation or attempted
violation of the U.S. export laws.
4.7. Customer acknowledges that Seller owns the Software and that any
rights therein not specifically granted in this License are the
exclusive property of Seller.
5. RIGHT TO COPY, PROTECTION AND SECURITY
5.1. Software provided hereunder may be copied (for back-up purposes and
disaster recovery only) in whole or in part, in printed or machine-
readable form for Customer's internal use only, provided, however,
that no more than two (2) printed copies and two (2) machine-readable
copies (other than copies electronically resident in Products) shall
be in existence at any one time `Without the prior written consent of
Seller.
5.2. With reference to any copyright notice of Seller associated with
Software, Customer agrees to include the same on all copies it makes
in whole or in part. Seller's copyright notice may appear in any of
several forms, including machine-readable form. Use of a copyright
notice on the Software does not imply that such has been published or
otherwise made generally available to the public.
5.3. Customer agrees to keep confidential, in accordance with the terms of
the Agreement or a non-disclosure agreement signed by the parties, and
not provide or otherwise make available in any form any Software or
its contents, or any portion thereof, or any documentation pertaining
to the Software, to any person other than employees of Customer or
Seller.
5.4. Software is the sole and exclusive property of Seller and no title or
ownership rights to the Software or any of its parts, including
documentation, is transferred to Customer.
5.5. Customer acknowledges that it is the responsibility of Customer to
take all reasonable measures to safeguard Software and to prevent its
unauthorized use or duplication.
6. REMEDIES
Customer acknowledges that violation of the terms of this License Agreement
or the Agreement shall cause Seller irreparable harm for which monetary
damages may be inadequate, and Customer agrees that Seller may, in addition
to any other legal or equitable remedy, seek temporary or permanent
injunctive relief without the need to prove actual harm in order to protect
Seller's interests.
-3-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
7. TERM
Unless otherwise terminated, pursuant to Section 8 hereof, the term of the
license granted pursuant to Section 3 herein shall be perpetual.
8. TERMINATION
8.1. The license granted hereunder may be terminated by Customer upon one
(1) month's prior written notice.
8.2. Seller may terminate the license granted hereunder if Customer is in
material default of any of the terms and conditions of this Software
License and such termination shall be effective if Customer fails to
correct such default within thirty (30) days after written notice
thereof by Seller. The provisions of Sections 4 and 5 herein shall
survive termination of any such license.
8.3. Within one (1) month after termination of the license granted
hereunder, Customer shall furnish to Seller a document certifying that
through its best efforts and to the best of its knowledge, the
original and all copies in whole or in part of all Software, in any
form, including any copy in an updated work, have been returned to
Seller or destroyed. With prior written consent from Seller, Customer
may retain one (1) copy for archival purposes only.
9. RIGHTS OF THE PARTIES
9.1. Nothing contained herein shall be deemed to grant, either directly or
by implication, estoppel, or otherwise, any license under any patents,
patent applications or copyrights of Seller except as expressly
granted herein.
9.2. Rights in programs or operating systems of third parties, if any, are
further limited by their license agreements with such third parties,
which agreements are hereby incorporated by reference thereto and made
a part hereof as if fully set forth herein. Customer agrees to abide
thereby.
9.3. During the term of the license granted pursuant to Section 3 herein
and for a period of one (1) year after expiration or termination,
Seller, and where applicable, its licenser(s), or their
representatives may, upon prior notice to Customer, a) inspect the
files, computer processors, equipment, facilities and premises of
Customer during normal working hours to verify Customer's compliance
with this Software License, and b) while conducting such inspection,
copy and/or retain all Software, including the medium on which it is
stored and all documentation that Customer may possess in violation of
the license or the Agreement.
9.4. Customer acknowledges that the provisions of this Exhibit D are
intended to inure to the benefit of Seller and its licensors and their
respective successors in interest.
-4-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
Customer acknowledges that Seller or its licensers have the right to
enforce these provisions against Customer, whether in Seller's or its
licenser's name.
-5-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
10. LIMITATIONS ON SOFTWARE
Customer understands that errors occur in Software and Seller makes no
warranty that the Software will perform without error. Customer accepts the
Software "as is" subject to the warranty set forth in Section 7 of the
Agreement.
11. YEAR 2000 WARRANTY
In addition to the warranties contained in Section 7 of the Agreement,
Seller warrants, covenants and agrees that the Software will perform,
operate and function when used in accordance with its associated
documentation, and will be capable upon Commissioning to accurately
process, provide and/or receive date data from, into and between the
twentieth and twenty-first centuries, including the years 1999 and 2000,
and leap year calculations, provided that all other products (e.g.
hardware, software and firmware) used in combination with the Products(s)
properly exchanges date data with it.
12. ENTIRE UNDERSTANDING
12.1. This Exhibit D is a part of, and is to be read together with, the
Agreement which contains additional terms and conditions, warranties
and indemnities applicable to the Software.
12.2. Notwithstanding anything to the contrary in other agreements,
purchase orders or order acknowledgments, the Agreement, the
Software specifications set forth in the Products specifications and
this Exhibit D set forth the entire understanding and obligations
regarding use of Software, implied or expressed.
-6-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
Exhibit E
Engineering and Optimization
Procedure
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
Introduction
This exhibit establishes the Performance Criteria and Procedure to be used for
the Engineering and Optimization for the Products ("Product" shall mean Seller's
SpotLight 2000 product). The Engineering and Optimization Procedure consists of
[***]. The Engineering and Optimization Procedure consists of separate
activities for analog and CDMA consisting of:
[***]
Comp1etion of the Engineering and Optimization of a SpotLight shall be indicated
by [***] found at the end of this Exhibit E.
[***]
In order for Customer and Seller to configure the Product, Customer must provide
the following specific cell site information for all current and planned sites
in the area of Customer's network where Product is to be installed. The
information is required for all sites regardless of whether the SpotLight
Product is to be installed in that particular site, unless specifically
designated as "Required for Product sites only" in the list below, which
indicates that the information is required only for sites where Product is to be
installed.
[***]
-2-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
[***]
The collection and measurement process described in this section will be
followed during both the Baseline Performance Collection and the Performance
Collection and Evaluation. Drive test route(s), drive test equipment, data to
be collected during drive tests, number of runs per drive test route and
frequency of data sampling all must be agreed to by Customer and Seller prior to
beginning the Measurement Process.
Information discovered in the drive tests and information that must be provided
by customer and included in both the Baseline Performance Collection and the
Performance Collection and Evaluation include but are not limited to:
[***]
In addition to collecting the above information, switch statistics from the
previous year must be analyzed to determine if adjustments due to seasonal
variation between the baseline data collection phase and the Product data
collection phase need to be made. Customer must provide either the actual
switch statistics or summaries of seasonal statistical traffic trends.
Customer must provide a log of all system changes during both the Baseline
Performance Collection phase and the Performance Collection and Evaluation
phase, recording the occurrences of such events as cell site additions,
frequency re-tunes, outages, etc. Customer must collect the switch statistics
and provide them to Metawave on a daily basis.
The calculation for Lost Calls Percentage and Ineffective Attempts Percentage
will be calculated using the following equations unless otherwise agreed to by
Seller and Customer:
[***]
[***]
-3-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
[***]
Using the procedure set forth in the Measurement Process section of this
exhibit, Customer and Seller will perform drive tests to determine the current
performance characteristics of the existing CDMA and analog networks. Customer
and Seller must agree in writing as to the validity of baseline switch statistic
data and drive test data.
The duration of the baseline sampling time period shall be mutually agreed upon.
[***]. Switch statistics collected during the baseline sampling time period
will include both daily summaries (excluding maintenance windows) and system
busy hour summaries.
[***]
[***]
-4-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
[***]
[***]
[***]
[***]
-5-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
[***]
Cell Site Name & Identification ______________________ Date:_________________
Purchase Order:___________________________________
Metawave Communications Corporation Grupo IUSACELL S.A. de C.V.
By:____________________________ By:____________________________________
Name:__________________________ Name:__________________________________
Title:_________________________ Title:_________________________________
Date:__________________________ Date:__________________________________
Comments
--------
______________________________________________________________________________
______________________________________________________________________________
-6-
CONFIDENTIAL
[***] CONFIDENTIAL TREATMENT REQUESTED. OMITTED PORTIONS FILED SEPARATELY WITH
THE SECURITIES AND EXCHANGE COMMISSION.
