EXHIBIT 10.25
GENERAL AGREEMENT
FOR THE PROCUREMENT OF
PRODUCTS AND SERVICES
AND THE LICENSING OF SOFTWARE
BY AND BETWEEN
LUCENT TECHNOLOGIES INC.
AND
COPPER MOUNTAIN NETWORKS
CONTRACT NO. WR71980061
NOVEMBER 17, 1998
Confidential treatment has been requested for portions of this exhibit. The copy
filed herewith omits the information subject to the confidentiality request.
Omissions are designated as [***]. A complete version of this exhibit has been
filed separately with the Securities and Exchange Commission.
TABLE OF CONTENTS
PAGE
1. General Terms And Conditions................................ 1
1.1 Scope................................................. 1
1.2 Definitions........................................... 1
1.3 Term Of Agreement..................................... 2
1.4 Option To Extend...................................... 2
1.5 Market Rights......................................... 3
1.6 Continuing Availability And Discontinuance............ 3
1.7 Manufacturing Rights.................................. 4
1.8 [***]................................................. 5
2. Product Specific Terms And Conditions....................... 5
2.1 Price And Discounts................................... 5
2.2 Specifications........................................ 6
2.3 Product Documentation................................. 6
2.4 Packing............................................... 6
2.5 Technical Support..................................... 7
2.6 Training.............................................. 8
2.7 Insignia.............................................. 8
2.8 Marking............................................... 9
2.9 Installation And Cutover Assistance................... 9
2.10 Product Line Evolution................................ 10
2.11 Product Acceptance.................................... 10
2.12 Interfaces............................................ 11
2.13 Marketing Support..................................... 11
3. Orders And Payment.......................................... 12
3.1 Payment Terms......................................... 12
3.2 FOB................................................... 12
3.3 Purchase Orders....................................... 12
3.4 Forecasts............................................. 13
3.5 Changes To Purchase Orders............................ 13
3.6 Demand Pull Forecast and Ordering Procedures.......... 13
i
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portion.
TABLE OF CONTENTS
(CONTINUED)
PAGE
3.7 Delivery Process & Shipping Interval................... 13
3.8 Variation In Quantity.................................. 14
3.9 Shipping............................................... 14
3.10 Invoicing.............................................. 14
3.11 Invoicing For Stock.................................... 14
3.12 Storage Of Paid-For-Stock.............................. 15
3.13 Monthly Shipment Reports............................... 15
3.14 Electronic Data Interchange (EDI)...................... 15
3.15 Bar Code Shipping And Receiving Labels................. 15
3.16 Title And Risk Of Loss................................. 15
3.17 Point of Sale Information.............................. 15
4. Quality And ISO 9000........................................ 16
4.1 Quality................................................ 16
4.2 Engineering Changes.................................... 16
4.3 Field Retrofit Orders (FRO)............................ 18
4.4 Epidemic Failures...................................... 18
5. Limited Warranty And Repairs................................ 18
5.1 Limited Warranty....................................... 18
5.2 Repairs Not Covered Under Warranty..................... 20
5.3 Repair Procedures...................................... 21
5.4 Warranty Tracking...................................... 21
5.5 Year 2000 Functionality................................ 21
6. Intellectual Property....................................... 22
6.1 Intellectual Property Rights........................... 22
6.2 Product Software License Grant......................... 22
6.3 Supplier's And Lucent's Information.................... 22
7. Other Terms And Conditions.................................. 22
7.1 Notices................................................ 22
7.2 Indemnity.............................................. 23
7.3 Identification......................................... 24
ii
TABLE OF CONTENTS
(CONTINUED)
PAGE
7.4 Compliance With Laws................................... 25
7.5 Force Majeure.......................................... 25
7.6 Assignment............................................. 25
7.7 Taxes.................................................. 25
7.8 Government Contract Provisions......................... 26
7.9 Impleader.............................................. 26
7.10 Registration And Radiation Standards................... 26
7.11 Toxic Substances And Product Hazards................... 26
7.12 Ozone Depleting Substances............................. 27
7.13 Heavy Metals And/Or CFC In Packaging................... 27
7.14 Chlorofluorocarbons.................................... 27
7.15 Insurance.............................................. 27
7.16 Choice Of Law.......................................... 28
7.17 Severability........................................... 28
7.18 Section Headings....................................... 29
7.19 Waiver................................................. 29
7.20 Dispute Resolution..................................... 29
7.21 Export Control......................................... 31
7.22 Records................................................ 31
7.23 Termination............................................ 31
7.24 Publicity.............................................. 32
7.25 Survival Of Obligations................................ 32
7.26 Limitation of Liability................................ 32
7.27 Steering Committee..................................... 32
7.28 Relationship of the Parties............................ 33
7.29 Counterparts........................................... 33
7.30 Entire Agreement....................................... 33
iii
LIST OF APPENDICES
Appendix 1 Pricing Terms
Appendix 2 Specifications
Appendix 3 Quality Requirements
Appendix 4 Change Control Process
Appendix 5 Demand Pull Procedures
Appendix 6 Non-Disclosure Agreement
Appendix 7 Warranty Eligibility System
1
THIS AGREEMENT between LUCENT TECHNOLOGIES INC., with its principal offices
at 000 Xxxxxxxx Xxxxxx, Xxxxxx Xxxx, Xxx Xxxxxx 00000-0000 ("Lucent") and COPPER
MOUNTAIN NETWORKS, INC., with offices at 0000 Xxxxxxxxxxx Xxx, Xxxx Xxxx,
Xxxxxxxxxx 00000 ("Supplier") (hereinafter collectively the "Parties") is for
the anticipated future procurement of certain products and the license of
certain associated software, in accordance with the terms and conditions stated
in this Agreement and any attachments to this Agreement.
WHEREAS, Supplier desires to supply products, software and maintenance
services to Lucent;
WHEREAS, Lucent desires to procure products, software and maintenance
services from Supplier; and
WHEREAS, the Parties desire to combine Lucent's AnyMedia(TM) FAST solution
and Supplier's CopperEdge(TM) DSL Concentrator into an offer for the CLEC market
in the United States as well as for Multi-Tenant Units in the United States;
NOW, THEREFORE, in consideration of the promises and mutual covenants set
forth in this Agreement, the Parties agree to the terms and conditions set forth
herein below:
1. GENERAL TERMS AND CONDITIONS
1.1 SCOPE
Except as mutually agreed by the Parties in writing, this Agreement shall
apply only to transactions between Supplier and Lucent for the purchase and sale
of Product in the United States for the CLEC market and the Multi-Tenant Unit
market, each as hereinafter defined. Product shall be furnished by Supplier on
an as-ordered basis.
1.2 DEFINITIONS
1.2.1 "CLEC" means competitive local exchange carrier.
1.2.2 "COLLATERAL MATERIAL" means data sheets, application briefs,
presentation brochures and other advertising or promotional materials that are
distributed in the normal course of business to market the Product and that are
not designated as confidential by the Parties.
1.2.3 "DSLAM" means Digital Subscriber Line Access Multiplexer, an
acronym that is in general use in the telecommunications industry and which has
the meaning ascribed by that general use.
1.2.4 "FIRST SERVICE APPLICATION" (FSA) means a set of managed
activities administered by Lucent that validate the first deployment of new
Products. The FSA process is intended to assure that the first service
deployment is timely and meets or exceeds customers' expectations with respect
to quality, delivery, installation, testing, operations, maintenance and
acceptance.
1.
1.2.5 "FIT" means the suitability or readiness of a product for a
particular application, including environmental extremes, marginal parameters,
physical and signal compatibility with interfacing systems and surroundings,
level of performance, safety margins, reliability, maintainability and
installability.
1.2.6 "FORM" means the weight, density, chemical or product
composition, size, shape, structure, appearance, protocol, pattern, composition,
configuration and marking/identification of product and software.
1.2.7 "FUNCTION" means the set tasks or purposes for which a product
is used by the customer, including all the tasks generally accepted for the
product and those specifically designated by the customer.
1.2.8 "INITIAL CUSTOMER APPLICATION" (ICA) means a controlled
process, administered by Lucent, intended to assure that new Products meet or
exceed Lucent's customers' expectations with respect to quality, delivery,
installation, testing, operations, maintenance, and acceptance.
1.2.9 "MULTI-TENANT UNIT" means a commercial building, residential
building, or hotel that requires a DSLAM within the structure to provide high
speed data services over the existing copper wiring.
1.2.10 "PRODUCT" as used in this Agreement shall mean Supplier's
CopperEdge DSL Concentrator hardware and software and other Supplier-proprietary
hardware and software listed and described in Appendix 2.
1.2.11 "SOURCE MATERIAL" means business and technical information and
other relevant materials which are not confidential and which Supplier will make
available to Lucent to support the development of Collateral Material.
1.2.12 "TECHNICAL INFORMATION" means written user manuals,
installation manuals, technical reference manuals, release notes and other
relevant technical materials.
1.3 TERM OF AGREEMENT
This Agreement shall be effective on the last date of signature below
(hereinafter the "Effective Date") and shall continue in effect for a term of
three (3) years (hereinafter the "Term"). Absent mutual written consent to the
contrary, the modification or termination of this Agreement shall not affect the
rights or obligations of either Party under any purchase order accepted by
Supplier before the effective date of such modification or termination.
1.4 OPTION TO EXTEND
Lucent shall have the right to extend the period specified in Section 1.3
for up to twelve (12) months by giving Supplier at least thirty (30) days prior
written notice. Within ten (10) days of the date of Lucent's notice to extend
the period, Supplier shall notify Lucent in writing whether Supplier proposes to
revise the price(s) under this Agreement. If the Parties fail to agree on the
revised price(s) within twenty (20) days after the date of Supplier's notice,
Lucent's notice
2.
of extension shall be considered withdrawn and prices for outstanding orders or
orders placed during the term of this Agreement shall not be revised. Any
subsequent renewal will be upon mutual written agreement of the Parties.
1.5 MARKET RIGHTS
1.5.1 It is expressly understood and agreed that this Agreement
neither grants to Supplier an exclusive right or privilege to sell to Lucent any
or all products of the type described in the "Product" definition which Lucent
may require, nor requires the purchase of Product or any other products from
Supplier by Lucent. It is, therefore, understood that Lucent may contract with
other manufacturers and suppliers for the procurement of comparable products. In
addition, Lucent shall, at its sole discretion, decide the extent to which
Lucent will market, advertise, promote, support or otherwise assist in further
offerings of the Product.
1.5.2 Supplier agrees that purchases by Lucent under this Agreement
shall neither restrict the right of Lucent to cease purchasing nor require
Lucent to continue any level of such purchases.
1.6 CONTINUING AVAILABILITY AND DISCONTINUANCE
1.6.1 Supplier agrees to offer for sale to Lucent, during the term of
this Agreement, Product conforming to the Specifications (as defined in Section
2.2 below). Subject to Section 1.6.2 and Section 7.23.1, Supplier further agrees
to offer for sale to Lucent, during the term of this Agreement and until five
(5) years after the expiration of this Agreement unless otherwise mutually
agreed by the Parties, repair parts ("Parts") which are functionally equivalent
in Form and Fit to the Product covered by this Agreement. The price and terms
for the Parts shall be the price and terms set forth in Supplier's then current
agreement with Lucent for said Parts or, if no such agreement exists, the price
and terms shall be agreed upon by Lucent and Supplier. In the absence of any
such Agreement following good faith negotiations, Supplier shall not continue to
be obligated to sell Parts.
1.6.2 In the event that Supplier should discontinue manufacturing any
Product or Part, Supplier will provide Lucent:
(A) At least twelve (12) months prior notice of
discontinuance, and
(B) The opportunity to place an end of life purchase order,
which Supplier will accept during the notice period as set forth in (a); and
(C) Supplier will accept reasonable delivery schedules for
such Product or Part for delivery up to nine (9) months after the discontinuance
notice described in subsection (a) above. The Parties will agree on a mutually
acceptable delivery schedule, taking into account Lucent's needs to fulfill its
customers' requirements and Supplier's needs not to overburden its manufacturing
capacity.
3.
1.7 MANUFACTURING RIGHTS
1.7.1 Supplier agrees to grant Lucent a non-exclusive manufacturing
license pursuant to a separate manufacturing license agreement between the
Parties as contemplated in Section 1.7.2 below in the event that:
(A) Supplier has materially defaulted in performance or
otherwise has failed to perform its obligations under:
(I) this Agreement and such default or failure to perform
has continued beyond the cure period provided in the Agreement (absent agreement
by the Parties to extend such cure period for a particular default or failure to
perform) following written notice thereof to Supplier from Lucent, or
(II) any agreement between Supplier and Lucent or its
customers for the maintenance or correction of the Products, and [***];
(B) Supplier has made an assignment for the benefit of
creditors, has admitted in writing its inability to pay debts as they mature or
has ceased operating in the normal course of business;
(C) A trustee or receiver of Supplier of any substantial part
of Supplier's assets has been appointed by any court;
(D) A proceeding has been commenced by any party against
Supplier under any one of the provisions of a bankruptcy code and:
(I) the proceeding has been pending for at least sixty
(60) days, or
(II) Supplier has consented, either expressly or by
operation of law, to be adjudged or decreed a bankrupt, or
(III) Supplier has been decreed or adjudged a bankrupt;
(E) A voluntary petition has been filed by Supplier under any
of the provisions of a bankruptcy code;
(F) Supplier is acquired by or merges with another
corporation, and such corporation (1) refuses to continue to sell Product to
Lucent at the prices in and under the terms and conditions of the then current
agreements between Supplier and Lucent and under the terms and conditions of any
general agreement between Supplier and Lucent; or (2) fails to enter into a
formal Assignment of Obligations document (so long as such document does not
contain terms different from the terms set forth in this Agreement) with Lucent
to assume all the rights and obligations of Supplier under the agreement then in
place between Supplier and Lucent; and
4.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
(G) Upon the conditions and for the purposes set forth in
Section 5.5.
1.7.2 The Parties shall enter into a manufacturing license agreement
within ninety (90) days after the Effective Date that is intended to grant
Lucent certain rights in Supplier's technology to enable Lucent to manufacture
Products or Parts in the event that the circumstances listed in Section 1.7.1
occur. The manufacturing license would be limited to (i) fulfilling the
requirements of Lucent's customers for Product and Parts where such customers
are Lucent's customers as of the time of exercise of the manufacturing license
rights, and (ii) making error corrections to the Products to meet the
Specifications. Lucent will inform Supplier of any error corrections it desires
to make and the Parties will discuss in good faith whether Supplier should make
such error corrections and whether Supplier will support the corrected Product
following correction; provided, however, that this sentence will not prohibit
Lucent from making the error corrections itself. The license grant would be
royalty-bearing at a rate to be agreed upon, subject to a royalty-fee waiver for
either an agreed upon time or amount to enable Lucent to recover its reasonable
costs incurred to exercise its manufacturing rights. Such manufacturing license
agreement shall also provide to Lucent the necessary Product documentation and
information, originated or developed by Supplier, that is required for Lucent to
exercise its manufacturing license.
1.8
[***]
2. PRODUCT SPECIFIC TERMS AND CONDITIONS
2.1 PRICE AND DISCOUNTS
2.1.1 Lucent's purchase price for Products is determined by
multiplying Supplier's list price times the applicable discount set forth in
Appendix 1, which is incorporated herein by reference. Supplier's current list
prices are set forth in Appendix 1, together with Lucent's discounts from list
prices. Supplier may revise its list prices at any time in its sole discretion;
provided, however, that it agrees to give Lucent thirty (30) days prior written
notice of such list price changes. Either Party may request a review of Lucent's
discounts at any time and the Parties will enter into good faith discussions to
review the discounts and make any mutually agreeable modifications. It is the
intent of the Parties that all prices support earning an acceptable return for
each Party and that such return will be at least as good as the return generated
by the initial prices.
2.1.2 Other miscellaneous pricing information is also included in
Appendix 1.
5.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
2.2 SPECIFICATIONS
2.2.1 Product to be supplied hereunder shall conform to the
descriptions, shape, performance and functions set forth in Appendix 2
("Specifications") or such other specifications as the Parties may agree to in
writing. Modifications to the Product or Specifications shall be made with the
mutual written consent of the Parties and in accordance with the Change Control
Process set forth in Appendix 4.
2.3 PRODUCT DOCUMENTATION
2.3.1 Subject to the terms and conditions of this Agreement, Supplier
will provide electronic master copies, [***], of the Source Materials,
Collateral Material and Technical Documentation as mutually agreed upon and in a
mutually agreed to format. These Source Materials, Collateral Material and
Technical Documentation may be reproduced, reformatted, modified and distributed
by Lucent, subject in each instance to Supplier's prior review and written
approval and, where applicable, subject to the confidentiality provisions set
forth in Section 6.3.
2.3.2 Within sixty (60) days after the Effective Date, Supplier will
develop a documentation plan, that will include, but not be limited to,
document/material description, scope/intent, availability date, and format to be
used to transmit to Lucent. In addition, the documentation plan will provide a
process for the Supplier to provide update(s) to Lucent.
2.3.3 Lucent agrees to reproduce Supplier's copyright notice
contained in any documentation reproduced without change by Lucent. For
documentation that is reformatted or modified by Lucent, Lucent shall have the
right to place only Lucent's own copyright notice on the reformatted or modified
documentation. It is the intent of the Parties that Lucent's copyright notice
shall be interpreted to protect the underlying copyright rights of Supplier to
the documentation to the extent such underlying rights are owned by Supplier. To
the extent that use of Lucent's notice without referencing Supplier's copyright
notice or other proprietary rights notice would adversely affect Supplier's
intellectual property rights, the Parties will agree upon mutually acceptable
proprietary rights notices. Supplier will correct promptly, by providing
replacement or updates, any defects in documentation which Supplier becomes
aware of and/or about which Lucent notifies Supplier, that may result in a
product service loss or could result in a safety hazard.
2.4 PACKING
2.4.1 Product shall be duly packaged and marked in accordance with
industry standards and requirements under applicable laws and government
regulations including, but not limited to any such laws and regulations relating
to safety, health and the environment; provided, however, that if Supplier
packages Product as specified by Lucent, including without limitation Section
2.4.3 hereof, such packaging shall be deemed to comply with the foregoing
requirements.
2.4.2 Supplier will package Product individually or as integrated
assemblies (except for small parts, such as screws) with appropriate protective
material to guarantee safe arrival (e.g., plug-in boards should be in static
controlled packaging and/or padded cartons). Bulk
6.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
packaging of Product and Parts is acceptable if agreed to by both Parties. Each
box will contain Product or Parts ordered under a single purchase order, but
multiple boxes may be placed in a larger container. Supplier will, when so
requested by Lucent and without additional charge, provide and affix to each
Product packaging, bar code labels as Lucent will specify.
2.4.3 Product will be packed by Supplier in accordance with Lucent
Specification PKG-91NJ1045, April 1, 1998, a copy of which Supplier has in its
possession.
2.5 TECHNICAL SUPPORT
2.5.1 Lucent will be the primary interface to all customers and will
provide Tier 1 and Tier 2 technical customer support. A Tier 1 support person
has a working knowledge of the Product and technology as well as an
understanding of the network in order to resolve common and or known problems.
"Tier 2" means the second level of technical customer support to which Tier 1
escalates issues that cannot be resolved at Tier 1.
2.5.2 Supplier will provide Lucent Tier 3 technical support. "Tier 3"
means technical support that addresses issues escalated from Tier 2 when either
the source of the issue cannot be identified or the issue is identified and must
be addressed by the manufacturer of the Product. Tier 3 technical support will
be provided twenty-four (24) hours a day, seven (7) days a week via telephone to
Lucent's Tier 2 support personnel [***]. Supplier's response time shall be
within [***] on Monday through Friday, 9 am - 6 pm (Pacific Time), and within
[***] at all other times. Supplier will provide emergency on-site twenty-four
(24) hour technical assistance at Lucent's request and at rates to be mutually
agreed upon by the Parties. Six (6) months after the Effective Date and every
six (6) months thereafter, Supplier may request a review of Lucent's Tier 3
support requests that Supplier believes (i) do not fit into Tier 3 or (ii) are
otherwise excessive given the volume of Product purchases made by Lucent. Upon
such a request for review, the Parties will discuss in good faith appropriate
resolution of Supplier's concerns, such as, by way of example only, compensation
to Supplier and/or changes to the Parties' support processes.
2.5.3 Within sixty (60) days after the Effective Date, Lucent's and
Supplier's technical support groups shall establish a technical support plan in
support of the implementation of this Section, which shall include, but is not
limited to, the following items:
(A) Roles and responsibilities of Tier 1, Tier 2 and Tier 3
support persons;
(B) Procedure for seamless Tier 3 escalation including the
mechanics of how Tier 2 will contact Tier 3;
(C) Procedure for developing and implementing corrective
action plans with the goal to minimize customer impact from Lucent customer
network outages due to Product-related problems; such plans should address
short-term workarounds and long-term solutions in accordance with the terms and
conditions of this Agreement;
7.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
(D) Procedure for Tier 2 to enter product change requests as
contemplated in Section 4.2 hereof; and
(E) A clear definition of terms.
2.5.4 Lucent may request ongoing technical support, including field
service and assistance and technical support in the development of specific
customer proposals, provided, however, that the availability or performance of
this technical support service shall not be construed as altering or affecting
Supplier's obligations as set forth in Section 5 (Limited Warranty) or elsewhere
provided for in this Agreement.
2.6 TRAINING
2.6.1 Supplier will provide an electronic master copy of
instructional Source Material, [***], that can be used by Lucent to
generate customer-training materials. Supplier will also provide two (2) train-
the-trainer courses, on terms and at a location and schedule to be agreed, for
Lucent's personnel at a level mutually agreed upon with the mutual objective of
the Parties that Lucent will be able to effectively market and support
Supplier's Product. Additional courses will be made available to Lucent at
Supplier's then current rates. The training will include, but not be limited to,
the Product's features, target markets and selling strategies, as well as
technical aspects of the Product to enable Lucent to properly configure
Supplier's Product to operate with Lucent's products and provide technical
support.
2.6.2 After the Effective Date and before Supplier delivers the
train-the-trainer courses to Lucent, Supplier acknowledges that Lucent may not
be prepared to provide any requested training to Lucent's customers. Therefore,
Supplier will assist Lucent in providing customer training until the delivery of
the first train-the-trainer course referenced in Section 2.6.1 above. The
Parties agree that if Supplier considers the amount of training support it
provides pursuant to this Section 2.6.2 to be excessive, the Parties will review
the training schedule and mutually agree to terms and conditions under which
further training support will be provided to satisfy any remaining obligations
of this Section 2.6.2.
2.6.3 Within sixty (60) days after the Effective Date, Supplier will
develop a training plan that will include, but not be limited to, course
descriptions, a course development process requiring Lucent's approval of
courses, a course schedule and a process for providing course updates outside
the standard schedule.
2.7 INSIGNIA
2.7.1 Upon Lucent's written request, "Insignia," including certain
trademarks, trade names, insignia, symbols, decorative designs, or packaging
designs of Lucent will be properly affixed by Supplier to the Product furnished
or its packaging. Such Insignia will not be affixed, used, or otherwise
displayed on the Product furnished or in connection with the Product without
written approval of Lucent. The manner in which such Insignia will be affixed
must be approved in writing by Lucent in accordance with standards established
by Lucent as applicable. Lucent shall retain all right, title and interest in
any and all packaging designs, finished artwork, and separations Lucent
furnishes to Supplier. This Section does not reduce or modify Supplier's
obligations under Sections 6.3 and 7.3.
8.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
2.8 MARKING
2.8.1 The Parties currently intend for the Product to be co-branded.
Within forty-five (45) days after the Effective Date, Supplier will provide
Lucent with a proposal on co-branding. This proposal will be subject to Lucent's
written approval and needs to incorporate the applicable provisions of this
Agreement.
2.8.2 All Product furnished under this Agreement shall be marked for
identification purposes in accordance with the Specifications and as follows:
(A) with Supplier vendor code, model/serial number;
(B) with month and year of manufacture;
(C) markings in accordance with the requirements outlined in
Lucent Specifications KS-23490 and KS-22002, as amended from time to time, which
Supplier has in its possession;
(D) Common Language Equipment Identification (CLEI) Note:
Common Language and CLEI are trademarks of Xxxx Communications Research; Lucent
Apparatus code, serial, or model numbers;
(E) Warranty Eligibility System (WES) tracking information;
and
(F) Underwriters Laboratories and Federal Communications
Commission markings as appropriate.
(G) In addition, Supplier agrees to add any other
identification that might be requested in writing by Lucent. Charges, if any for
such additional identification marking shall be as agreed upon by Supplier and
Lucent prior to the implementation of any change. This Section does not reduce
or modify Supplier's obligations under Section 2.7, Insignia.
2.9 INSTALLATION AND CUTOVER ASSISTANCE
2.9.1 In the event Supplier is not installing the Product, and if
requested by Lucent and agreed by Supplier, Supplier agrees to make available at
the installation site, on rates and terms to be agreed, a field engineer(s) to
render installation and cut-over assistance as requested by Lucent and as
defined below.
2.9.2 Supplier will provide reasonable assistance, [***], to
support [***] Lucent-designated FSAs, annually, for each new release of
Product as determined by mutual agreement of the Parties. Such support shall not
exceed [***] person days per FSA, unless mutually agreed to by the Parties.
2.9.3 Supplier will provide reasonable assistance, [***], to
support [***] ICAs per year. Such support shall not exceed [***] person
days per ICA, unless mutually
9.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
agreed to by the Parties. The Parties understand and acknowledge that they will
try to limit the number of ICA's to fewer than five per year and to limit
Supplier's involvement in such ICA's.
2.9.4 Additional Supplier FSA/ICA support will be mutually agreed to
and be at a cost as defined in Appendix 1 unless otherwise mutually agreed to in
writing.
2.10 PRODUCT LINE EVOLUTION
2.10.1 As set forth in Section 7.27, Supplier and Lucent shall have
periodic meetings (once per quarter or as often as mutually agreed to) to
discuss plans for product line evolution.
2.10.2 The Parties agree to keep abreast of major developments in the
telecommunications industry and to meet, from time to time in accordance with
Section 7.27, and to discuss any developments that might substantially affect
the production of Product under this Agreement.
2.11 PRODUCT ACCEPTANCE
2.11.1 The Product and any other new product offering by Supplier to
Lucent hereunder shall be subject to initial prototype acceptance testing by
Lucent in accordance with mutually acceptable criteria and procedures to be
proposed by Lucent promptly and agreed upon by Supplier. For the initial Product
covered by this Agreement, such agreement shall occur within sixty (60) days
following the Effective Date. If not otherwise set forth elsewhere, such
acceptance criteria and procedures will also include the Parties' agreement
regarding acceptable failure rates and reliability specifications (such failure
rates and reliability specifications to be initially proposed by Supplier) for
purposes of Section 4.4. For all new product offerings by Supplier or for
changes to the Product, such agreement shall be reached within a mutually
agreeable time frame consistent with the planned introduction date. If no
proposal is made within the applicable period by Lucent, the Product will be
deemed accepted upon delivery. After acceptance of the prototype for the Product
and for any new product that Lucent may choose to purchase from Supplier, all
subsequent deliveries of Products or new product offerings shall be deemed
accepted upon delivery. If, however, the Product has been modified pursuant to
Section 4.2, the modified Product will also be subject to the initial acceptance
testing procedures set forth in this Section 2.11 prior to manufacturing and
supply for Lucent in production quantities.
2.11.2 Supplier shall submit to a location designated by Lucent for
examination a mutually agreed to sample or prototype configuration of production
samples of the Product, modified Product, or new product offering (referred to
herein collectively as a "Sample") produced in a continuous run on permanent
production tooling.
2.11.3 Lucent shall evaluate Samples in accordance with the
Specifications and issue a written acceptance or rejection to Supplier within
forty-five (45) days after receipt of Samples. The failure by Lucent to reject
with cause within such time shall constitute acceptance. Any rejection shall
identify the failure to meet Specifications in reasonable detail sufficient to
allow Supplier to correct the deficiency.
10.
2.11.4 If a Sample evaluated pursuant to this Section is rejected,
Supplier agrees to correct, at its expense, the failure to meet the
Specifications (referred to herein as "Defect") leading to such rejection and
resubmit a corrected Sample to Lucent within thirty (30) days after receipt of
notice from Lucent of such Defect or such longer period that the Parties
mutually agree in writing is necessary to rectify the Defect (referred to herein
as the "Corrective Period"). Lucent shall have thirty (30) days after Supplier
resubmits the corrected Sample to accept or reject in writing such Sample in
accordance with Section 2.11.1.
2.11.5 If the Defect in a rejected Sample is not corrected within the
Corrective Period or if a resubmitted Sample that is re-tested or re-evaluated
by Lucent during the thirty (30) day re-evaluation period is again rejected,
Lucent may at its option: (a) accept the sample as is; (b) afford Supplier one
or more correction extensions; or (c) terminate this Agreement without any cost
or charge to Lucent whatsoever if for the initial Product (but cannot terminate
the Agreement if for modifications to the Product or for follow-on products),
including costs or charges incurred by Supplier in procuring equipment, material
and special tooling to perform any part of this Agreement, loss of profits or
labor, and materials expended in the production of Samples.
2.11.6 If the Parties opt to perform the testing at Supplier's
facility, Supplier shall allow Lucent to send representative(s) to observe and
participate in the testing.
2.11.7 Except as set forth in this Section 2.11, or as mutually
agreed by the Parties, Supplier shall not make any shipments under this
Agreement prior to acceptance pursuant to this Section 2.11.
2.11.8 Lucent will return Samples to Supplier unless otherwise
mutually agreed to.
2.12 INTERFACES
2.12.1 Supplier agrees to provide Lucent with any publicly available
interface specification documentation and reasonable amounts of support to
resolve any questions Lucent's Tier 2 support personnel or Lucent's customers
may have regarding these interface specifications.
2.12.2 For a period of five (5) years after providing any Product
pursuant to this Agreement, Supplier shall, upon request, provide to Lucent upon
Lucent's reasonable request any applicable, publicly-available interface
specification documentation.
2.13 MARKETING SUPPORT
2.13.1 Upon Lucent's reasonable request, Supplier shall provide
Lucent, [***], marketing support in a manner and upon terms mutually
acceptable to the Parties. Examples of support may include consultation services
regarding marketing and systems support, marketing opportunity assessment,
solution design reviews and product availability and delivery assistance. In
addition, during the initial months of this Agreement, Supplier agrees to
provide appropriate sales support to Lucent's sales and marketing efforts in a
manner and upon terms mutually acceptable to the Parties.
11.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
2.13.2 Based on information provided by Supplier under Section 2.3,
Product Documentation, Lucent will develop its own Collateral Material, customer
training manuals, price lists and sales presentations necessary for marketing
the Product, subject to the procedures set forth in Section 2.3.
3. ORDERS AND PAYMENT
3.1 PAYMENT TERMS
Invoices shall be paid net [***] from the date of delivery of the Product
to Lucent or receipt of the applicable invoice by Lucent, whichever occurs
later.
3.2 FOB
The Product shall be shipped F.O.B. Supplier's facility, 0000 Xxxxxxx
Xxxxxx Xxxxxxxxx, Xxx Xxxxx, Xxxxxxxxxx 00000, freight charges payable by Lucent
upon delivery.
3.3 PURCHASE ORDERS
3.3.1 Lucent will issue written purchase orders on a monthly basis
reflecting its orders and any changes to existing orders in accordance with the
change to purchase order provisions set forth in Section 3.5 below. Purchase
orders issued under this Agreement shall be sent to the following address:
TO SUPPLIER: 0000 Xxxxxxx Xxxxxx Xxxxxxxxx
Xxx Xxxxx, Xxxxxxxxxx 00000
Attention: Sales Administration
Phone: (000) 000-0000
Facsimile: (000) 000-0000
3.3.2 Supplier may change its address upon thirty (30) days
written notice to Lucent.
3.3.3 [***], at Lucent's option, subject to the reschedule and
forecast change schedule set forth in Section 3.5 below. Such purchase orders
shall specify: (a) a description of Product, inclusive of any
numerical/alphabetical identification referenced in Appendix 1, (b) the quantity
of Product ordered; (c) a preferred delivery date, (d) the applicable price, (e)
the location to which Product is to be shipped, and (f) the location to which
invoices should be sent for payment, if different from the address set forth in
this Agreement. Lucent's commitment to Supplier shall in no case exceed the
quantities specified on each spot purchase order. Purchase orders shall be
governed by the terms and conditions of this Agreement; any additional or
inconsistent terms contained in a purchase order or a Supplier sales
acknowledgment are hereby rejected.
12.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
3.4 FORECASTS
Lucent will issue to Supplier an initial written estimate of annual (twelve (12)
calendar months) purchases. Additionally, Lucent will provide Supplier with a
written rolling estimate of purchases ("Forecast"). During the first six (6)
months after the Effective Date, such rolling estimate shall be provided to
Supplier monthly. Thereafter, the rolling estimate shall be provided weekly.
Such Forecast shall be issued solely for material planning purposes and shall
not be deemed a commitment by Lucent. Consistent with the foregoing, Supplier
will not be required to fulfill such Forecast. Supplier will, however, fulfill
Lucent purchase orders as set forth below.
3.5 CHANGES TO PURCHASE ORDERS
3.5.1 Lucent shall have the right to reschedule shipment of some
or all of the quantity of such spot purchase order or to reduce the spot
purchase order quantity in accordance with the schedule below:
Number of Days Prior to Reschedule Allowable Reschedule or
or Forecast Change Forecast Change
0-30 [***]
31-60 [***]
61-90 [***]
91 days or more [***]
3.5.2 Any change requested by Lucent beyond the allowable decrease
shall be handled by Supplier on a commercially reasonable efforts basis.
3.6 DEMAND PULL FORECAST AND ORDERING PROCEDURES.
Within forty-five (45) days after the Effective Date, the Parties will
agree on "Demand Pull" delivery arrangements for the Product consistent with the
preliminary draft of such agreement currently attached hereto as Appendix 5.
When completed, the written agreement regarding "Demand Pull" delivery
arrangements will be attached hereto and incorporated herein as the revised
Appendix 5. Upon mutual written agreement between Lucent and Supplier, Lucent
shall have the right to implement such delivery arrangements by providing an
estimated purchase order for Products. The terms and conditions of demand pull
delivery, as stated in this Agreement, shall apply to any such delivery
arrangements as may be implemented after the demand pull arrangements become
effective. After such time, the spot purchase order procedures set forth above
shall no longer apply and the demand pull procedures to be set forth in Appendix
5 will govern the estimated purchase order.
3.7 DELIVERY PROCESS & SHIPPING INTERVAL
3.7.1 Delivery time means the interval from order receipt by
Supplier to Product shipment. During the period when Lucent is ordering Product
by means of the spot purchase order procedure set forth in Sections 3.3, 3.4 and
3.5 above, the Parties anticipate a [***]
13.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
[***] delivery time. Supplier will use commercially reasonable efforts to reduce
the delivery time. For orders above the Company's forecast, Supplier will use
commercially reasonable efforts to deliver within the delivery time, as defined
in this Section, or as soon as possible, thereafter.
3.7.2 In the event that Supplier exceeds the above maximum
delivery time for reasons other than those provided for in Section 7.5 (Force
Majeure) then in addition to all other rights and remedies at law or equity or
otherwise, and without any liability or obligation of Lucent, Lucent shall have
the right to: (a) cancel such purchase order, or (b) extend such delivery date
to a later date, subject, however, to the right to cancel as in (a) preceding if
delivery is not made or performance is not completed on or before such extended
delivery date. If Lucent elects to extend such delivery date, Supplier may agree
to absorb the difference between the charges to ship normal transportation and
the charges to ship premium overnight.
3.8 VARIATION IN QUANTITY
Lucent assumes no liability for Product produced, processed or shipped in
excess of the amount specified in this Agreement or in an order issued pursuant
to this Agreement.
3.9 SHIPPING
Supplier shall: (1) ship the Product complete unless instructed otherwise;
(2) ship to the destination designated in the Agreement or purchase order; (3)
ship according to routing instructions given by Lucent; (4) place the Agreement
and order number on all subordinate documents; (5) enclose a packing list with
each shipment and, when more than one package is shipped, identify the package
containing the packing list; and (6) xxxx the Agreement and order number on all
packages and shipping papers. Adequate protective packing shall be furnished at
no additional charge. Shipping and routing instructions may be furnished or
altered by Lucent in writing.
3.10 INVOICING
Supplier shall (1) render invoices in duplicate, or as otherwise specified
in this Agreement, showing Agreement number, through routing and weight, (2)
render separate invoices for each shipment within three (3) days after shipment
and (3) mail invoices with copies of bills of lading and shipping notices to the
address shown on this Agreement or purchase order. If prepayment of
transportation charges is authorized, Supplier shall include the transportation
charges from the F.O.B. point to the destination as a separate item on the
invoice stating the name of the carrier used. No minimum billing charges are
permitted unless expressly authorized in the Agreement.
3.11 INVOICING FOR STOCK
If Lucent requests, for reasons other than covered by the Force Majeure
Section, that shipment be postponed beyond the date shown on a purchase order,
Supplier may invoice Lucent as of the original scheduled delivery date for
Product manufactured under this Agreement, if it has been inspected and approved
by Lucent's Product Management Organization or its authorized agent, within five
(5) working days after notification of postponement, (provided
14.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
inspection has been specified in this Agreement or in a purchase order issued
under this Agreement). If inspection is not completed within five (5) working
days, Supplier may invoice Lucent in accordance with Section 3.10.
3.12 STORAGE OF PAID-FOR-STOCK
3.12.1 All Product invoiced to Lucent in accordance with Section
3.11 (Invoicing for Stock) shall be marked conspicuously as Lucent's property,
and safely stored by Supplier separately from any other material stocks, and
shall be shipped out as ordered by Lucent. Supplier assumes responsibility for
any loss or damage to such Product while stored by Supplier. Supplier agrees
upon request by Lucent, to execute and deliver to Lucent a xxxx of sale
evidencing conveyance of such Product, free from liens and encumbrances,
together with any other document such as a bailment agreement, warehouse
receipt, lease (on storage space), mortgage, deed of trust, or surety bond as
Lucent may deem necessary to secure title in such Product as against third
parties, all of which documents shall be in a form acceptable to Lucent.
3.12.2 Supplier agrees to store the Product without charge for
thirty (30) days. Subsequent storage charges shall be mutually agreed to by
Supplier and Lucent.
3.13 MONTHLY SHIPMENT REPORTS
Supplier agrees to render monthly shipment reports on or before the tenth
working day of the succeeding month containing the following information:
customer, shipment date, quantity and model number of units shipped.
3.14 ELECTRONIC DATA INTERCHANGE (EDI)
If requested by Lucent, Supplier shall use commercially reasonable efforts
to implement EDI at its sole expense.
3.15 BAR CODE SHIPPING AND RECEIVING LABELS
Supplier shall at its sole expense place Lucent's specified bar code labels
on all shipping packages and containers for the Product shipped under this
Agreement. Such bar code labels and the placement thereof shall meet the
requirements shown in the document "Bar Code Shipping Label - Profile Program
#801-001-107, May 30, 1997" which Supplier has in its possession. Lucent may
change such specification upon written notice to Supplier and Supplier shall
comply with such changes in a commercially reasonable time.
3.16 TITLE AND RISK OF LOSS
Title and risk of loss and damage to Product purchased by Lucent under this
Agreement shall vest in Lucent when the Product has been delivered at the FOB
point.
3.17 POINT OF SALE INFORMATION. Subject to Section 6.3, Lucent agrees to
provide Supplier written point of sales reports for purposes of Supplier
compensating Supplier's sales personnel. The Parties will agree within sixty
(60) days following the Effective Date on the format and frequency of such
reports.
15.
4. QUALITY AND ISO 9000
4.1 QUALITY
Commitment to quality is a primary requirement of this Agreement. Supplier
agrees to ensure continued quality improvement in the Product covered under in
this Agreement. Supplier will use commercially reasonable efforts to demonstrate
commitment to a quality improvement process by implementing and documenting a
quality system that meets the requirements under ISO 9001 and 9002 no later than
eighteen (18) months from the Effective Date. Upon Lucent's reasonable advance
written request, Supplier agrees to allow Lucent or Lucent's agent reasonably
acceptable to Supplier to conduct on-site reviews at the Supplier's hardware
manufacturing and software development facility(s) to verify compliance with
requirements outlined in Appendix 3 prior to ISO certification and no more than
once annually after certification (unless an epidemic failure has occurred under
Section 4.4, in which case Lucent may conduct on-site reviews as Lucent deems
reasonably necessary for one year after any such epidemic failure, unless
otherwise mutually agreed to). Supplier agrees to provide Lucent mutually-
acceptable quality data from time to time as the Parties deem appropriate.
Supplier also agrees to develop corrective action plans for any quality system
deficiencies that may be detected during these periodic on-site reviews, and
submit these to Lucent within thirty (30) days after receiving written notice of
the deficiency from Lucent. Further, Supplier agrees to implement any corrective
action plan within three (3) months after agreement upon a corrective action
plan, unless otherwise agreed by the Parties.
4.2 ENGINEERING CHANGES
4.2.1 Any change that Supplier proposes to the Product furnished
hereunder, or any firmware or software incorporated or embedded therein (except
for immaterial changes to software code), and the documentation related thereto
that would impact upon (a) reliability, (b) the Specifications, or (c) Form,
Fit, or Function requires the approval of Lucent, as outlined in the Engineering
Change Control Procedures, Appendix 4. Such approval shall not be unreasonably
withheld or delayed. Supplier shall forward such proposed change to Lucent at
the address in Section 7.1, at least thirty (30) calendar days prior to the
proposed effective date except for those cases where an extremely unsatisfactory
condition requires immediate action, in which case Supplier shall promptly
advise Lucent. Supplier shall at the time of notification, provide Lucent with
(a) a product change number, (b) a description of such change, (c) the reason
for such change, (d) a classification of such change in accordance with the
change classifications below, (e) a description of the impact of such change
upon (1) reliability, (2) the Specifications, and (3) Form, Fit or Function; (f)
the proposed price impact, if any, and (g) the proposed effective date for such
change and recommended implementation schedule therefor.
4.2.2 Any change in Product shall be classified into one of the
following two (2) classes:
"A" - Changes which are needed to correct inoperative electrical or
mechanical conditions, or extremely unsatisfactory operating maintenance
conditions, or conditions which result in safety hazards, and which are judged
severe enough to have to be made to all Product in
16.
process, stock or installed. Any conditional application criteria is to be
specified in the change notification document.
"B" - Changes which are sufficiently important to justify their
application to Product being manufactured (as soon as reasonably possible) or to
be implemented for Products going forward, and which may be recommended for
application to existing installations in the field. Examples of this class of
change may include, but are not limited to:
(A) Providing new features that directly affect subscriber
service;
(B) Providing design improvements which result in better
service capabilities, longer life or improved transmission margins;
(C) Providing changes in design which result in important cost
savings to Supplier or Lucent; and
(D) Conditions of a mandatory nature, for example, the
fulfillment of federal registration or future compatibility requirements, or for
conditions of sufficient importance to be intended for universal application.
Supplier shall propose the classification of all changes. The final
classification of any Product change proposed by Supplier will be by mutual
agreement between Supplier and Lucent. In the event Supplier and Lucent fail to
reach mutual agreement, either Party may move to Dispute Resolution as set forth
in Section 7.20.
4.2.3 For Class A changes, Supplier shall, pursuant to the
provisions of this Agreement governing repair or replacement of Product under
warranty, replace or modify, at no charge, all affected Product furnished
hereunder and documentation related thereto. Supplier shall supply relevant
documentation to Lucent for all Class A changes. Supplier shall propose a
schedule for the application of these changes at all equipment locations which
shall not exceed one (1) year from date of the change notice. This schedule
shall be mutually agreed upon by Lucent and Supplier.
4.2.4 For Class B changes, Supplier shall first notify Lucent of
the exact nature of the change. Details on the proposed implementation procedure
for Product which is being or will be manufactured shall be discussed with
Lucent. Lucent shall, at its option, determine if Product previously shipped
will be replaced or modified. Should such replacements or modifications be
deemed necessary, Supplier shall, pursuant to the provision of this Agreement
governing repair of Product not covered under warranty, make arrangements for
the necessary Product replacement or modification at prices and schedules to be
mutually agreed upon by Lucent and the Supplier prior to implementation.
Documentation related thereto shall be provided by Supplier as specified for
Class A above.
4.2.5 Lucent shall provide Supplier sixty (60) calendar days prior
written notice of all Engineering Changes that Lucent requests for incorporation
into the Product. Supplier shall have thirty (30) calendar days to reply to the
feasibility of the requested Engineering Changes. If not commercially feasible,
Supplier will inform Lucent of the reason(s). If commercially
17.
feasible, Supplier shall provide a quote on price to be paid by Lucent and
development schedule should Lucent request Supplier to implement such change(s).
4.3 FIELD RETROFIT ORDERS (FRO).
FROs are modifications to installed Product required to: meet safety
requirements, assure proper operation, and/or assure that the Product meets
Specifications. Supplier will, [***], provide Lucent with any parts and
instructions necessary to implement any FRO issued by Supplier during the term
of this Agreement, and thereafter as long as parts are made available under this
Agreement. Supplier will reimburse Lucent for Lucent's labor for each FRO
installed by Lucent, at a rate mutually agreed to in advance of action taken by
Lucent and Supplier.
4.4 EPIDEMIC FAILURES.
If the Products as delivered do not meet or exceed the failure rate and/or
reliability requirements set forth in the Specifications or such other written
document as the Parties may agree to regarding failure rates or reliability
requirements (such written document to be incorporated herein by reference),
Supplier shall (a) identify the cause and propose an engineering change and/or
field retrofit in accordance with the provisions of this Section 4, and (b)
within the warranty term, repair or replace the defective Product with
conforming Product in accordance with the repair and replacement provisions of
Section 5. The existence of any such epidemic failure shall be established from
Lucent's service records for the Product and by showing that the average failure
rate for the specified period of the monitored Product is not in conformance
with the applicable Specifications.
5. LIMITED WARRANTY AND REPAIRS
5.1 LIMITED WARRANTY
5.1.1 Supplier warrants to Lucent that Product furnished will be
new, free from material defects in design (except to the extent designed by
Lucent), material and workmanship, and will conform to and perform in accordance
with the Specifications, for [***] from the date of delivery to Lucent. [***].
Both Lucent and Supplier acknowledge that - due to, but not limited to, customer
requirements and competitive pressures - this standard warranty period may need
to be increased. On a case by case basis, the Parties will mutually agree to any
changes to the standard warranty period. The Parties agree to work together to
ensure rapid resolution to all proposed changes to the standard warranty period.
5.1.2 Supplier warrants that at the time of delivery to Lucent
such Product shall be free of any security interest or any other lien or any
other encumbrance whatsoever. All warranties shall survive inspection,
acceptance and payment in accordance with their terms.
5.1.3 Supplier warrants that during the warranty term set forth in
Section 5.1.1 any software that Supplier incorporates with or embeds in the
Product or that Supplier otherwise supplies for use in conjunction with the
Product shall be free from significant errors, will conform to and function in
accordance with the applicable Specifications, and the media conveying the
software shall be free from defects.
18.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
5.1.4 Defective or non-conforming Product or software will, at
Supplier's option, either (i) be returned to Supplier for repair or replacement
in accordance with the RMA procedures defined and described in Section 5.3, or
(ii) be repaired or replaced by Supplier on customer's site. If software media
is defective, Supplier will promptly replace the defective media. Cost of
shipping with risk of in-transit loss and damage will be borne by the shipping
Party. Unless otherwise agreed upon by Supplier and Lucent, Supplier shall
complete repairs or error correction and ship the repaired Product or software
[***] of receipt of defective or non-conforming Product or software, or at
Supplier's option, ship replacement Product or software within [***] after
written notification is given Supplier by Lucent. If Product returned to
Supplier on customer's site for repair as provided for in this Section is
determined to be beyond repair, Supplier shall promptly so notify Lucent and,
unless otherwise agreed to in writing by Supplier and Lucent, ship replacement
Product without charge within [***] of such notification. If returned Product is
determined to be beyond repair due to improper handling, use, installation or
maintenance, Lucent will be notified and given the option to either scrap the
unit in place or purchase a replacement unit.
5.1.5 Replacement Product or software shall be warranted for the
balance of the warranty period as set forth in Section 5.1.1 or [***] after the
Product or software is returned to customer, whichever is later. Any Product or
software which is repaired, modified, or otherwise serviced by Supplier shall be
warranted as provided in this Section 5 [***] or [***] after the Product or
software is returned to customer, whichever is later (based upon the date
repair, modification or other service is completed and accepted by Lucent).
5.1.6 Supplier will notify Lucent as soon as possible after it
becomes aware of any actual or potential defects in the Product or software and
its ability to provide any of the services that may adversely affect: (I) the
operation or use of the Product or software by Lucent's customers, or (II) the
Supplier's ability to maintain/support the Product or software.
5.1.7 In addition, should Product which is subject to Part 15 of
the FCC Rules (as defined in Section 7.10), during use generate harmful
interference to radio communications, Supplier shall provide to Lucent
information relating to methods of suppressing such interference and pay the
cost of suppressing such interference or, at the option of Lucent, accept the
return of the Product and refund to Lucent the price paid for the Product less a
reasonable amount for depreciation, if applicable.
5.1.8 To the extent that Product furnished under this Agreement is
also subject to FCC Rules or similar rules or regulations of the country in
which the Product will be installed governing the use of the Product as a
component in a system, Lucent shall be responsible for compliance with the
applicable FCC Rules governing the system. Supplier shall fully cooperate with
Lucent by providing technical support and information, and, upon written request
from Lucent, shall modify Product to enable Lucent to ensure ongoing compliance
with the FCC
19.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
Rules or similar rules or regulations of the country in which the Product will
be installed. Lucent agrees to pay any increase in Supplier's costs and/or
expenses resulting from Lucent's request to modify Product to enable Lucent to
comply with the FCC Rules or similar rules or regulations of the country in
which the Product will be installed.
5.1.9 EXCEPT FOR THE WARRANTIES EXPRESSLY SET FORTH IN THIS
AGREEMENT, SUPPLIER MAKES NO OTHER WARRANTIES REGARDING THE PRODUCT, ANY
SOFTWARE INCORPORATED THEREIN OR ANY SERVICES PROVIDED THEREWITH AND HEREBY
DISCLAIMS ANY AND ALL SUCH OTHER WARRANTIES, EXPRESS, IMPLIED OR STATUTORY,
INCLUDING, BUT NOT LIMITED TO, ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR
PARTICULAR PURPOSE, WHICH ARE ALL HEREBY EXCLUDED. The remedies set forth in
this Section 5 are Lucent's sole and exclusive remedies for breach of the
warranties set forth in this Section 5 and Supplier's sole and exclusive
obligation regarding any breach of such warranties.
5.2 REPAIRS NOT COVERED UNDER WARRANTY
5.2.1 In addition to repairs provided for in Section 5.1 and
subject to Section 5.3 hereof, Supplier agrees to provide repair service on all
Product ordered under this Agreement during the term of this Agreement. Product
to be repaired under this Section will be returned to a location designated by
Supplier, and unless otherwise agreed upon by Supplier and Lucent, Supplier
shall ship the repaired Product, or a replacement Product pursuant to Section
5.2.2, within [***] following return of the defective or non-conforming Product.
With the concurrence and scheduling of Lucent, repair may be made by Supplier on
site.
5.2.2 If Product is returned to Supplier for repair as provided
for in this Section and is determined to be beyond repair, Supplier shall so
notify Lucent. If requested by Lucent, Supplier will sell to Lucent a
replacement at the price set forth in Supplier's then current agreement with
Lucent for said Product or, if no such agreement exists, at a price agreed upon
by Supplier and Lucent. Further, if requested by Lucent, Supplier shall take the
necessary steps to dispose of the irreparable Product and pay to Lucent the
salvage value, if any, less all reasonable costs to the Supplier for the
disposal.
5.2.3 All transportation costs of in transit risk of loss and
damage to Product returned to Supplier for repair under this Section will be
borne by Lucent and all transportation costs of and in transit risk of loss and
damage to such repaired or replacement Product returned to Lucent will be borne
by Supplier.
5.2.4 Price schedules for repairs under this Section are listed in
Appendix 1.
5.2.5 Within sixty (60) days after the Effective Date, Lucent's
and Supplier's repair groups shall establish a repair plan in support of the
implementation of this Section, which shall include, but is not limited to, the
following items:
(A) the respective roles and responsibilities of the
Parties; and
(B) the Product flow to ensure timely return of repaired
Product or replacement of defective Product to a customer.
20.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
5.3 REPAIR PROCEDURES
5.3.1 Lucent shall call Supplier for a Return Material
Authorization (RMA) number prior to the return of any Product. Lucent shall
furnish the following information with Product returned to Supplier for repair:
(a) Lucent's name and complete address; (b) name(s) and telephone number(s) of
Lucent's employee(s) to contact in case of questions about the Product to be
repaired; (c) ship-to address for return of repaired Product if different from
(a); (d) a complete list of Product returned including serial numbers; (e) the
nature of the defect or failure, if known; and (f) whether or not returned
Product is in warranty. The name and telephone number of the initial individual
to be contacted concerning any questions that may arise concerning repair is
Xxxx Xxxxxxx, Vice President of Customer Support and Quality, (000) 000-0000,
ext. 103. In returning any Product to Supplier, Lucent and customer shall use
functionally equivalent packaging to the original packaging provided by
Supplier.
5.3.2 Product repaired by Supplier shall have the repair
completion date identified in a permanent manner at a readily visible location
on the Product and the repaired Product shall be returned with a tag or other
papers describing the repairs which have been made.
5.3.3 All invoices originated by Supplier for repair services must
be clearly identified as such, and must contain or have attached: (1) a
reference to Lucent's RMA for these repair services, (2) a detailed description
of repairs made by Supplier and the need therefor, and (3) an itemized listing
of parts and labor charges, if any. Further, the provisions of Section 3.9 and
Section 3.10, other than provisions relating to transportation charges with
respect to Product repaired under warranty, shall apply to Supplier's return to
Lucent of repaired Product.
5.3.4 The Parties agree that No Trouble Found (NTF) conditions
test and evaluation time shall be the hourly rate for Repairs listed in Appendix
1. Supplier shall inform Lucent within forty eight (48) hours of the findings of
each NTF condition so that appropriate investigatory measures may be taken to
determine the root cause.
5.4 WARRANTY TRACKING
Supplier agrees to provide the necessary information via electronic file to
Lucent on a timely basis for input to Lucent's Warranty Eligibility System
(XXX). See Appendix 7 for XXX requirements.
5.5 YEAR 2000 FUNCTIONALITY
Supplier warrants that the Product will record, store, process and present
calendar dates falling on or after January 1, 2000, to the extent that the
Product actually does record, store, process or present calendar dates, in the
same manner and with the same functionality as it performed before January 1,
2000. The warranty under this Section 5.5 shall not apply to output, results,
errors, or abnormal terminations caused in whole or in part by (i) any use of
the Product in combination with any other product not created by Supplier, (ii)
errors not attributable to date-specific data, (iii) any modifications of the
Product made by a party other than Supplier, and (iv) any data provided to the
Product which does not specify the century or is incorrect or ambiguous.
Lucent's sole and exclusive remedy and Supplier's sole and exclusive obligation
for breach of the foregoing warranty shall be (i) Supplier's use of commercially
reasonable efforts to promptly
21.
correct or replace (in no more than sixty (60) days from receipt of notice) the
Product at no additional charge or fee to Lucent so that it complies with the
terms of the warranty contained in this Section 5.5, and (ii) should Supplier
fail to cure the breach of this warranty within such sixty (60) day period,
Lucent will be entitled to exercise its manufacturing license under Section 1.7
for the sole purpose of modifying the Product so that it does comply with this
warranty. This warranty shall be deemed to be a warranty for future performance
that shall continue through and including the year 2002, regardless of any
earlier termination of this Agreement.
6. INTELLECTUAL PROPERTY
6.1 INTELLECTUAL PROPERTY RIGHTS
The Parties acknowledge that, except as expressly set forth in this
Agreement, this Agreement shall not be deemed to have granted: (i) Supplier any
rights in or to Lucent's intellectual property, nor (ii) Lucent any rights in or
to Supplier's intellectual property. All rights not expressly granted herein are
reserved.
6.2 PRODUCT SOFTWARE LICENSE GRANT
Subject to the terms and conditions of this Agreement, Lucent shall have a
non-exclusive, [***], non-transferable license to distribute Supplier's
firmware and network management software used solely with or embedded in the
Product, in executable form only, in the United States solely as used with or
embedded in Product furnished to Lucent by Supplier under this Agreement in
order to enable Lucent's customers to use Supplier's firmware and network
management software used solely with or embedded in the Product. Lucent will not
itself, nor permit any of its licensees to, reverse compile or disassemble the
software, nor will Lucent reproduce the software for the purpose of furnishing
it to others or for any other purpose not expressly permitted by this Agreement.
6.3 SUPPLIER'S AND LUCENT'S INFORMATION
Confidentiality of information shall be governed by the Nondisclosure
Agreement between Lucent and Supplier effective August 24, 1998 and contained in
Appendix 6 of this Agreement, which is incorporated herein by reference and
which shall be coterminous with this Agreement, notwithstanding any provision
regarding term set forth therein.
7. OTHER TERMS AND CONDITIONS
7.1 NOTICES
Any notice, demand or other communication required, or which may be given
unless otherwise specifically provided for in this Agreement, shall be in
writing and shall be effective: five (5) days after mailed, if sent by
certified, postage prepaid U.S. mail; upon receipt of confirmation, if delivered
by confirmed facsimile; upon delivery, if delivered in person; or the day after
dispatch, if sent by an overnight courier service that provides the sender with
written record of delivery, and shall be addressed to the respective Parties as
follows:
To Lucent: Lucent Technologies Inc.
22.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
00 Xxxxxxxx Xxxx, Xxxx 0X-000
Xxxxxxxx, Xxx Xxxxxx XXX 00000-0000
Attention: Mynoon Doro
Director - Access Solutions Global Partnership
and Business Management
Voice: 000-000-0000
Facsimile: 000-000-0000
Fax Copies to: Lucent Technologies Inc.
000 Xxxx Xxxxxx Xxxx, Xxxxxxxx X
Xxxxxx, Xxx Xxxxxx, XXX 00000
Attention: Corporate Counsel, Switching
and Access Solutions
Voice: 000-000-0000
Fax: 000-000-0000
To Supplier: Copper Mountain Networks, Inc.
0000 Xxxxxxxxxxx Xxx
Xxxx Xxxx, Xxxxxxxxxx 00000
Attention: Vice-President, Business Development
Voice: 650-858-8500, ext. 260
Fax: 000-000-0000
Fax Copies to: Copper Mountain Networks, Inc.
0000 Xxxxxxxx Xxxxxx Xxxxxxxxx
Xxx Xxxxx, Xxxxxxxxxx 00000
Attention: Chief Financial Officer
Fax: 000- 000-0000
Xxxxxx Godward LLP
0000 Xx Xxxxxx Xxxx
Xxxx Xxxx, Xxxxxxxxxx 00000
Attention: Xxxxxxx Xxxxx
Fax: 000-000-0000
The above addresses may be changed at any time by giving prior written notice as
above provided.
7.2 INDEMNITY
7.2.1 Supplier agrees to indemnify, defend and hold harmless Lucent,
its affiliates, customers, employees, successors and assigns (all referred to in
this Section 7.2 as "Lucent") from and against any losses, expenses, damages,
claims, fines, penalties and expenses (including reasonable attorney's fees)
that arise out of or result from any and all third party claims that the Product
infringes any U.S. patent, copyright, trademark or misappropriates any trade
secret right. The foregoing indemnity shall not apply to the extent that the
claim is based upon or arises out of the use of the Product: (i) in any manner
not specified in the applicable
23.
documentation or the Specifications; (ii) outside the scope of the license
grant; (iii) if the Product has been modified by Lucent or any third party; or
(iv) if an alleged patent infringement or trade secret violation arises from
Lucent combining (or allowing the combination of) the Product with any
equipment, devices or software not supplied or specified by Supplier, and such
equipment, devices, or software or the combination with the Product infringes
the patent rights or misappropriates the trade secrets of a third party or
causes injury to a third party, if but for such combining or allowing
combination of such equipment, devices or software with the Product, the
infringement or injury would not exist. THE FOREGOING INDEMNITY STATES THE SOLE
AND EXCLUSIVE REMEDY OF LUCENT AND THE ENTIRE LIABILITY AND OBLIGATION OF
SUPPLIER WITH RESPECT TO ANY CLAIMS OF INFRINGEMENT OR MISAPPROPRIATION OF ANY
INTELLECTUAL PROPERTY RIGHTS BY THE PRODUCT OR ANY PART THEREOF.
7.2.2 Supplier shall indemnify, defend and hold Lucent harmless from
and against any losses, expenses, damages, claims, fines, penalties and expenses
(including reasonable attorneys' fees) that arise out of or result from: (1)
injuries or death to persons or damage to property, including theft, in any way
arising out of or caused or alleged to have been caused by the work or services
performed by, or Product and software provided by, Supplier or Supplier's
subcontractors, consultants or other persons furnished by Supplier; (2)
assertions of Workers' Compensation or similar acts by persons furnished by
Supplier; or (3) violation of any law, ordinance, rule, regulation or order
caused by Supplier's work or services under this Agreement or by the Product or
software provided by Supplier.
7.2.3 Lucent shall indemnify, defend and hold Supplier harmless from
and against any losses, expenses, damages, claims, fines, penalties and expenses
(including reasonable attorneys' fees) that arise out of or result from: (1)
injuries or death to persons or damage to property, including theft, in any way
arising out of or caused or alleged to have been caused by the work or services
performed by, or any equipment or software provided by, Lucent or Lucent's
subcontractors, consultants or other persons furnished by Lucent; (2) assertions
of Workers' Compensation or similar acts by persons furnished by Lucent; or (3)
violation of any law, ordinance, rule, regulation or order caused by Lucent's
work or services under this Agreement or by the equipment or software provided
by Lucent.
7.2.4 A Party's obligations to indemnify, defend and hold harmless
under this Section 7.2 are contingent upon the indemnified Party providing the
indemnifying Party: (1) prompt written notice of the existence of a claim; (2)
sole control of the defense and settlement of such claim; and (3) assistance in
the defense or settlement of such claim at the indemnifying Party's reasonable
request and expense.
7.3 IDENTIFICATION
Supplier shall not, without Lucent's prior written consent, engage in
publicity related to this Agreement, or make public use of any Identification in
any circumstances related to this Agreement. "Identification" means any
semblance of any trade name, trademark, service xxxx, insignia, symbol, logo, or
any other designation or drawing of Lucent or its affiliates. Supplier shall
remove or obliterate any Identification prior to any use or disposition of any
Product rejected or not purchased by Lucent.
24.
7.4 COMPLIANCE WITH LAWS
Each Party shall comply at its own expense with all applicable laws,
ordinances, regulations and codes, (including any pertaining to the environment,
safety or health) including the identification and procurement of required
permits, certificates, licenses, insurance, approvals and inspections in
performance of this Agreement.
7.5 FORCE MAJEURE
Neither Party shall be held responsible for any delay or failure in
performance of any part of this Agreement to the extent such delay or failure is
caused by fire, flood, strike, civil, governmental or military authority, act of
God, or other similar causes beyond its control and without the fault or
negligence of the delayed or non-performing party or its subcontractors ("force
majeure conditions"). Supplier's liability for loss or damage to Lucent's
Product in Supplier's possession or control shall not be modified by this
Section. When a Party's delay or nonperformance continues for a period of at
least one hundred and eighty (180) days, the other Party may terminate, at no
charge, this Agreement or an order under the Agreement.
7.6 ASSIGNMENT
Neither Party shall assign any right or interest under this Agreement
(excepting solely for moneys due or to become due) without the prior written
consent of the other Party, such consent not to be reasonably withheld or
delayed. Notwithstanding the foregoing, either Party may assign this Agreement
to a successor in interest without obtaining such consent in the event of a
merger, acquisition, change of control, reorganization, or sale of all or
substantially all of the assets of the assignor. In such event, an assigning
Party will make a good faith effort, consistent with its business needs under
the circumstances, but is not required to, provide the non-assigning Party prior
notice of a proposed assignment. In the event that a Party enters into
discussions with a third party concerning a merger, acquisition, change of
control, reorganization or sale of assets as described above, such Party shall
ensure that confidential information disclosed to it by the other Party hereto
pursuant to Section 6.3 above is not disclosed to the third party; and
furthermore, upon closing of any such merger, acquisition, change of control,
reorganization or sale of assets, the assigning Party will notify the non-
assigning Party in writing of such assignment and the non-assigning Party will
be entitled to request and receive a prompt return of its confidential
information that has been disclosed pursuant to Section 6.3. Any attempted
assignment in violation of this Section 7.6 shall be null and void. Each Party
shall be responsible to the other Party for all performance or other activities
by any subcontractor or agent of such Party.
7.7 TAXES
Lucent shall reimburse Supplier only for the following tax payments with
respect to transactions under this Agreement unless Lucent advises Supplier that
an exemption applies: state and local sales and use taxes, as applicable. Taxes
payable by Lucent shall be billed as separate items on Supplier's invoices and
shall not be included in Supplier's prices. At Lucent's expense and subject to
Lucent's direction and control, Lucent shall have the right to have Supplier
contest any such taxes that Lucent deems improperly levied.
25.
7.8 GOVERNMENT CONTRACT PROVISIONS
The following provisions regarding equal opportunity, and all applicable
laws, rules, regulations and executive orders specifically related thereto,
including applicable provisions and clauses from the Federal Acquisition
Regulation and all supplements thereto, are incorporated in this Agreement as
they apply to services performed under specific U.S. Government contracts: 41
CFR 60-1.4, Equal Opportunity; 41 CFR 60-1.7, Reports and Other Required
Information; 41 CFR 60-1.8, Segregated Facilities; 41 CFR 60-250.4, Affirmative
Action for Disabled Veterans and Veterans of the Vietnam Era (if in excess of
$10,000); and 41 CFR 60-741.4, Affirmative Action for Disabled Workers (if in
excess of $2,500), wherein "contractor" and "subcontractor" mean "Supplier." The
Product is a "commercial item," as that term is defined at 48 C.F.R. 2.101 (Oct
1995), containing "commercial computer software" and "commercial computer
software documentation," as such terms are used in 48 C.F.R. 12.212 (Sep 1995)
and will be provided to the U.S. Government only as a commercial end item.
Consistent with 48 C.F.R. 12.212 and 48 C.F.R. 227.7202-1 through 227.7202-4
(Jun 1995), all U.S. Government end users acquire the software incorporated in
the Product with only those rights set forth herein.
7.9 IMPLEADER
Supplier shall not implead or bring an action against Lucent based on any
claim by any person for personal injury or death to an employee of Lucent for
which Lucent has previously paid or is obligated to pay worker's compensation
benefits to such employee or claimant and for which such employee or claimant
could not otherwise bring legal action against Lucent.
7.10 REGISTRATION AND RADIATION STANDARDS
When Product furnished under this Agreement is subject to Part 68, Part 15
or any other part of the Federal Communication Commission's Rules and
Regulations, as may be amended from time to time (hereinafter "FCC Rules"),
Supplier warrants that such Product complies with the registration,
certification, type-acceptance and/or verification standards of the FCC Rules
including, but not limited to, all labeling, customer instruction requirements,
and the suppression of radiation to specified levels. Supplier shall also
establish periodic on-going compliance re-testing and follow a Quality Control
Program, submitted to Lucent, to assure that Product shipped complies with the
applicable FCC Rules. Supplier agrees to indemnify and save Lucent harmless from
any liability, claims or demands (including the costs, expenses and reasonable
attorney's fees on account thereof) that may be made because of Supplier's
noncompliance with the applicable FCC Rules. Supplier agrees to defend Lucent,
at Lucent's request, against such liability, claim or demand; provided that
Lucent provides Supplier (i) prompt written notice of the existence of such
claim, (ii) sole control of the defense and settlement of such claim, and (iii)
assistance in the defense or settlement of such claim at Supplier's reasonable
request and at Supplier's reasonable expense.
7.11 TOXIC SUBSTANCES AND PRODUCT HAZARDS
Supplier hereby warrants to Lucent that, except as expressly stated
elsewhere in this Agreement, all Product furnished by Supplier as described in
this Agreement is not defined as a
26.
hazardous or toxic substance or material under applicable federal, state or
local law, ordinance, rule, regulation or order, and presents no abnormal
hazards to persons or the environment.
7.12 OZONE DEPLETING SUBSTANCES
Supplier warrants and certifies that all products, including packaging and
packaging components, provided to Lucent under this Agreement have been
accurately labeled in accordance with the requirements of 40 CFR Part 82 -
entitled "Protection of Stratospheric Ozone, Subpart E - The Labeling of
Products Using Ozone Depleting Substances." Supplier agrees to indemnify, defend
and save harmless Lucent, its officers, directors and employees from and against
any losses, damages, claims, demands, suits, liabilities, fines, penalties, and
expenses (including reasonable attorneys' fees) that may be sustained by reason
of Supplier's non-compliance with such applicable law or the terms of this
warranty and certification; provided that Lucent provides Supplier (i) prompt
written notice of the existence of such claim, (ii) sole control of the defense
and settlement of such claim, and (iii) assistance in the defense or settlement
of such claim at Supplier's reasonable request and at Supplier's reasonable
expense.
7.13 HEAVY METALS AND/OR CFC IN PACKAGING
Supplier warrants to Lucent that no lead, cadmium, mercury or hexavalent
chromium has been intentionally added to any packaging or packaging component
(as defined under applicable laws) to be provided to Lucent under this Agreement
and that packaging materials were not manufactured using and do not contain
chlorofluorocarbons. Supplier further warrants to Lucent that the sum of the
concentration levels of lead, cadmium, mercury and hexavalent chromium in the
packaging or packaging components provided to Lucent under this Agreement do not
exceed 100 parts per million. Upon request, Supplier shall provide to Lucent
Certificates of Compliance certifying that the packaging and/or packaging
components provided under this Agreement are in compliance with the requirements
set forth above in this Section.
7.14 CHLOROFLUOROCARBONS
Supplier hereby warrants that it is aware of international agreements and
legislation in several nations, including the United States, which limit or ban
importation of any product containing or produced using chlorofluorocarbons
("CFCs") and certain chlorinated solvents. Supplier hereby warrants that the
Product will conform to all current and future requirements established pursuant
to such agreements, legislation and regulations and that the Product will be
able to be imported and used lawfully under all such agreements, legislation and
requirements. Supplier also warrants that it is currently reducing or, if
Supplier is not the manufacturer of the Product, is currently causing its
manufacturing vendor to reduce and will, in an expeditious manner, eliminate,
or, as applicable, have its manufacturing vendor eliminate the use of ODC's in
the manufacture of the Product.
7.15 INSURANCE
7.15.1 Supplier shall maintain during the term of this Agreement:
(1) Workers' Compensation insurance as prescribed by
the law of the state or nation in which the services are performed;
27.
(2) employer's liability insurance with limits of at
least [***] for each occurrence;
(3) automobile liability insurance if the use of motor
vehicles is required, with limits of at least [***] combined single limit for
bodily injury and property damage per occurrence;
(4) Commercial General Liability ("CGL") insurance,
ISO 1988 or later occurrence form of insurance, including Blanket Contractual
Liability and Broad Form Property Damage, with limits of at least [***] combined
single limit for bodily injury and property damage per occurrence; and
(5) if the furnishing to Lucent (by sale or otherwise)
of material or construction services is involved CGL insurance endorsed to
include products liability and completed operations coverage in the amount of
[***] per occurrence.
7.15.2 All CGL and automobile liability insurance shall designate
Lucent Technologies Inc., its affiliates, and its directors, officers and
employees as additional insureds. All such insurance must be primary and non-
contributory and required to respond and pay prior to any other insurance or
self-insurance available. Any other coverage available to Lucent shall apply on
an excess basis. Supplier agrees that Supplier, Supplier's insurer(s) and anyone
claiming by, through, under or in Supplier's behalf shall have no claim, right
of action or right of subrogation against Lucent and its customers based on any
loss or liability insured against under the foregoing insurance. Supplier shall
furnish prior to the start of work certificates or adequate proof of the
foregoing insurance, including, if specifically requested by Lucent,
endorsements and policies. Lucent shall be notified in writing at least thirty
(30) days prior to cancellation of or any change in the policy. Insurance
companies providing coverage under this Agreement must be rated by A-M Best with
at least an A-rating.
7.15.3 To the extent practicable under the circumstances, Supplier
will endeavor in good faith to require its subcontractors working on Lucent
projects to maintain the types of insurance in the amounts set forth in Section
7.15.1. Also, to the extent practicable under the circumstances, Supplier will
endeavor in good faith to obtain from such subcontractors certificates of the
insurance actually maintained by such subcontractors so that Lucent may review
such certificates if Lucent so requests.
7.16 CHOICE OF LAW
This Agreement and all transactions under it shall be governed by the laws
of the State of New Jersey excluding its choice of laws rules and excluding the
Convention for the International Sale of Goods.
7.17 SEVERABILITY
If any of the provisions of this Agreement shall be invalid or
unenforceable, such invalidity or unenforceability shall not invalidate or
render unenforceable the entire Agreement, but rather the entire Agreement shall
be construed as if not containing the particular invalid or
28.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
unenforceable provision or provisions, and the rights and obligations of
Supplier and Lucent shall be construed and enforced accordingly.
7.18 SECTION HEADINGS
The headings of the Sections in this Agreement are inserted for convenience
only and are not intended to affect the meaning or interpretation of this
Agreement.
7.19 WAIVER
The failure of either Party at any time to enforce any right or remedy
available to it under this Agreement or otherwise with respect to any breach or
failure by the other Party shall not be construed to be a waiver of such right
or remedy with respect to any other breach or failure by the other Party.
7.20 DISPUTE RESOLUTION
(A) The following procedures shall apply to any dispute or
disagreement between the Parties or any of their Related Parties (i.e., such
Party's wholly owned subsidiaries, and the respective divisions, heirs,
successors and assigns of such Party and its wholly owned subsidiaries) arising
out of this Agreement.
(B) First:
(I) either Party may give written notification of such
dispute or disagreement to the other Party and
(II) the Parties shall communicate with each other promptly
with a view to resolving such dispute or disagreement within twenty-one (21)
days (or such extended period as the Parties agree is appropriate in any case)
after such written notification is given.
(C) The giving of any notice regarding any dispute or
disagreement under this Section 7.20 shall toll the running of all applicable
statutes of limitation until the later of (i) ninety (90) days following the
giving of such notice or (ii) thirty (30) days following the termination of
discussions between the Parties concerning such dispute or disagreement.
(D) Second, if at the end of the twenty-one (21) day period
referenced in Section 7.20(b) (as it may be extended) such dispute or
disagreement has not been resolved to the satisfaction of both Parties, either
Party may request in writing that such dispute or disagreement be the subject of
non-binding mediation. Following such request, the Parties shall endeavor in
good faith promptly to identify a single person (who shall be a person with
experience and good reputation) who shall assist the Parties in discussing such
dispute or disagreement and in attempting to reach a mutually acceptable
business resolution. Such mediation process shall terminate not later than
thirty (30) days following the request therefor (or such extended or shorter
period as the Parties agree is appropriate). All applicable statutes of
limitation shall be tolled during the period of mediation.
29.
(E) Third, if at the end of the thirty (30) day period
referenced in Section 7.20(d) (as it may be extended or shortened) such dispute
or disagreement has not been resolved to the satisfaction of both Parties,
either Party (the "complainant") may commence binding arbitration by giving the
other Party (the "respondent") notice in writing (the "initiating notice")
setting forth in reasonable detail the nature of its claim and the relief
requested stating that the complainant is invoking the procedures set forth in
this Section 7.20 (e) and (f) and naming the complainant's representative on the
Arbitration Panel (as defined below). Within twenty-one (21) days of receipt of
an initiating notice, the respondent shall give the complainant notice in
writing (the "response") setting forth in reasonable detail: (i) the basis of
its response to the claim; (ii) the nature of any counterclaim it has against
the complainant arising from the same set of facts and circumstances that gave
rise to the original claim; (iii) any other counterclaim that Party wishes to
bring at that time (although the Party has no obligation to bring such
counterclaims at that time); (iv) the relief requested; and (v) naming the
respondent's representative on the Arbitration Panel. The two representatives
shall select a third person who is mutually acceptable to them. If the
representatives fail to make such selection within twenty-one (21) days, the
complainant and the respondent shall each replace its representative with a new
representative and the new representatives shall be subject to the preceding
sentence and this sentence. Once a third person is selected, such person
together with the representatives of the complainant and the respondent shall
form the Arbitration Panel. The date upon which the Arbitration Panel is formed
shall be the "Commencement Date."
(F) The Arbitration Panel shall conduct proceedings to determine
the merits under applicable law of the claims set forth in the initiating notice
and the response. The proceedings shall be administered by JAMS/Endispute in
accordance with its Comprehensive Arbitration Rules and Procedures in effect as
of the Effective Date, subject to the following additional rules:
(I) the proceedings shall take place in New York City;
(II) the Arbitration Panel (including, if necessary, any
replacement(s) to the Arbitration Panel) shall be selected as set forth in
Section 7.20(e);
(III) the available relief shall include damages,
injunctive relief and equitable relief to the extent allowed under the
applicable law, this Agreement and any other agreement between the Parties;
(IV) the Parties shall attempt in good faith promptly to
agree on the nature and extent of any discovery in connection with the
arbitration, provided that, in the absence of such agreement, discovery shall be
governed by JAMS/Endispute's Comprehensive Arbitration Rules and Procedures. In
addition, the applicable law with respect to privilege and other protections
from disclosure, including the work product doctrine shall apply;
(V) the final decision of the Arbitration Panel (the
"Award") shall be issued within six months of the Commencement Date (the date of
issuance of the Award being the "Award Date") and must be joined by at least two
members of the Arbitration Panel;
30.
(VI) each Party to the proceedings shall pay its own costs
in connection with the proceedings, including the costs and expenses of its
representative on the Arbitration Panel, and the Parties shall share equally the
other costs of the proceedings, including the fees of the third member of the
Arbitration Panel, except that the prevailing Party shall be entitled to recover
its attorneys' fees incurred in prosecution thereof.
(G) In accordance with the Federal Arbitration Act, 9 U.S.C.
(S)1 et seq., the Award shall be final and binding and judgment thereon may be
entered by any state or federal court having jurisdiction thereof.
(H) Nothing in this Section 7.20 shall be construed to preclude
either Party from seeking injunctive relief in a court of competent jurisdiction
to prevent imminent irreparable harm. The dispute resolution procedures set
forth herein shall be stayed pending disposition of any application for such
relief. The Parties agree that a court of competent jurisdiction may consider
the merits of any claim that is subject to the dispute resolution procedures set
forth herein to the extent necessary to resolve any permissible application for
injunctive relief.
7.21 EXPORT CONTROL
Neither Party shall use, distribute, transfer or transmit any Products,
software or Technical Information (even if incorporated into other products)
provided under this Agreement except in compliance with U.S. export laws and
regulations (the "Export Laws"). Neither Party shall directly or indirectly,
export or re-export the following items to any country which is in the then
current list of prohibited countries specified in the applicable Export Laws:
(a) software or technical data disclosed or provided to one Party by the other
or its subsidiaries or affiliates; or (b) the direct product of such software or
technical data. Each Party agrees to promptly inform Lucent in writing of any
written authorization issued by the U.S. Department of Commerce office of export
licensing to export or re-export any such items referenced in (a) or (b).
Supplier also will not, without the prior written consent of Lucent, export or
re-export, directly or indirectly, any technical data or software furnished
hereunder from the country in which Lucent first provided the technical data or
software to Supplier hereunder, except to the United States. The obligations
stated above in this clause will survive the expiration, cancellation, or
termination of this Agreement or any other related agreement.
7.22 RECORDS
Supplier shall maintain complete and accurate records of all amounts
billable to and payments made by Lucent hereunder, in accordance with generally
accepted accounting practices. Supplier shall retain such records for a period
of three (3) years from the date of invoice for the final shipment of Products
covered by this Agreement. Supplier agrees to provide supporting documentation
concerning any disputed amount or invoice to Lucent within thirty (30) days
after Lucent provides written notice of the dispute to Supplier.
7.23 TERMINATION
7.23.1 Lucent may terminate this Agreement for convenience by giving
Supplier ninety (90) days prior written notice. In such event, notwithstanding
any other provision herein
31.
to the contrary, any supply or support obligations stated to survive expiration
or termination of the Agreement shall also terminate, except that the following
obligations shall survive termination for convenience as follows: (i) Supplier
shall fulfill existing purchase orders accepted by Supplier prior to the
effective date of termination, as set forth in Section 1.3; and (ii) Supplier
shall fulfill its warranty obligations to Lucent for delivered Product under
Section 5 in existence as of the effective date of termination.
7.23.2 Either Party may terminate this Agreement upon ninety (90)
days prior written notice if the other Party shall be in material default of any
of the terms, conditions or covenants of this Agreement unless the defaulting
Party cures the breach during the notice period.
7.24 PUBLICITY
Promptly following the Effective Date, Lucent shall issue a mutually-
acceptable press release announcing this transaction. The Parties' goal is to
make such press release within two (2) weeks following the Effective Date.
Supplier may also make a similar, mutually-acceptable press release announcing
this transaction. Supplier and Lucent may not make press or other public
announcements or releases relating to this Agreement without the prior written
approval of the other Party. Such approval will not be unreasonably withheld or
delayed.
7.25 SURVIVAL OF OBLIGATIONS
Sections 1.2, 1.6, 2.2, 2.4, 2.5, 2.7, 2.8, 2.12, 3.1, 3.7, 3.8, 3.9, 3.14,
3.15, 4.4, 5.1, 5.3, 5.4, 5.5 (in accordance with its terms), 6.1, 6.3, 7.1,
7.25, 7.26, 7.28, 7.29, and 7.30 shall survive any termination or expiration of
this Agreement for the earlier of a period of five (5) years or such time as all
outstanding Lucent obligations regarding the Product to its existing customer
base for Products are met. In addition, Section 7.2 and Section 7.20 shall
survive any expiration or termination of the Agreement indefinitely.
7.26 LIMITATION OF LIABILITY.
IN NO EVENT SHALL EITHER PARTY BE LIABLE TO THE OTHER PARTY FOR ANY LOST
PROFITS, CONSEQUENTIAL DAMAGES, INCIDENTAL DAMAGES OR SPECIAL DAMAGES,
REGARDLESS OF CAUSE OF ACTION, EVEN IF SUCH PARTY HAS BEEN ADVISED OF THE
POSSIBILITY OF SUCH DAMAGES. EACH PARTY ACKNOWLEDGES THAT THIS LIMITATION OF
LIABILITY IS AN ESSENTIAL ELEMENT OF THE BARGAIN OF THE PARTIES AND THAT IN ITS
ABSENCE THE ECONOMIC TERMS OF THIS AGREEMENT WOULD BE SUBSTANTIALLY DIFFERENT.
7.27 STEERING COMMITTEE. The Parties agree to establish a steering
committee comprised of at least two (2) representatives from each Party, but in
all events an equal number from each Party. The steering committee's activities
are contemplated to include, but are not limited to, the following: issue
resolution, Agreement management, customer bid issues, sales tracking reports,
risk manufacturing builds, Product support strategies, pricing, training,
marketing strategies, implementation and tracking of support plans and other
customer or business issues that the steering committee deems reasonably
appropriate. These activities are
32.
not limited exclusively to the steering committee and may be discussed by other
representatives of the Parties as appropriate. The steering committee will meet
quarterly unless the Parties otherwise mutually agree.
7.28 RELATIONSHIP OF THE PARTIES.
The relationship of the Parties under this Agreement shall be and at all
times remain one of independent contractors and not principal and agent,
employer and employee, franchisor and franchisee, partners or joint venturers.
Neither Party shall have the authority to assume or create obligations on behalf
of the other Party. Each Party shall employ its own personnel and contractors
and shall be solely responsible for their acts and be responsible for payment
of all unemployment, Social Security, and other payroll taxes, including
contributions required by law.
7.29 COUNTERPARTS.
This Agreement may be executed in two or more counterparts, each of which
shall be deemed an original, but all of which shall constitute one and the same
instrument.
7.30 ENTIRE AGREEMENT
This Agreement, including all appendices attached hereto, shall constitute
the entire agreement between the Parties with respect to the subject matter of
this Agreement and shall not be modified or rescinded, except by a writing
signed by Supplier and Lucent. Printed provisions on the reverse side of
Lucent's purchase orders (except as specified otherwise in this Agreement) and
all contradictory or additional provisions on Supplier's forms shall be deemed
deleted and of no force or effect. Estimates or forecasts furnished by Lucent
shall not constitute commitments. The provisions of this Agreement supersede all
contemporaneous oral agreements and all prior oral and written communications
and understandings of the Parties with respect to the subject matter of this
Agreement.
33.
IN WITNESS WHEREOF, each of the Parties has caused this Agreement to be
executed by its duly authorized representatives on the respective dates entered
below
COPPER MOUNTAIN NETWORKS, INC. LUCENT TECHNOLOGIES INC.
By: /s/ XXXXXXX X. XXXXXXX By: /s/ XXXXXXX X. XXXXXXXXX
------------------------------ ---------------------------
Name: Xxxxxxx X. Xxxxxxx Name: Xxxxxxx X. Xxxxxxxxx
---------------------------- -------------------------
Title: Vice President Title: Purchasing Manager
--------------------------- ------------------------
Date: 11/17/98 Date: November 17, 1998
---------------------------- -------------------------
34.
APPENDIX 1
PRICING TERMS
Standard Systems Current Standard Systems are described in Schedule A.
Additional Standard Systems will be created in response to
customer needs.
Standard System and
Line Module Pricing First [***] [***] discount off Supplier list price
Next [***] [***] discount off Supplier list price
Thereafter [***] discount off Supplier list price
Parts Pricing First [***] [***] discount off Supplier list price
Next [***] [***] discount off Supplier list price
Thereafter [***] discount off Supplier list price
All of the above volume break points refer to Lucent's
cumulative net purchasing volume since contract inception.
Supplier List Prices Current Supplier list prices appear in Schedule B.
A-1.
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
SCHEDULE A
STANDARD SYSTEM CONFIGURATIONS
STANDARD SYSTEM 1
1 CE200 Chassis
1 System Control Module
1 Buffer Card
1 DS3 Frame Relay Module
2 Power Supplies
2 LC4 24-port SDS Line Modules
STANDARD SYSTEM 2
1 CE200 Chassis
1 System Control Module
1 Buffer Card
1 DS3 Frame Relay Module
2 Power Supplies
8 LC4 24-port SDSL Line Modules
STANDARD SYSTEM 3
1 CE200 Chassis
1 System Control Module
1 Buffer Card
1 DS3 Frame Relay Module
2 Power Supplies
2 LC4 24-port SDSL Line Modules
1 LC5 24-port IDSL Line Module
STANDARD SYSTEM 4
1 CE200 Chassis
1 System Control Module
1 Buffer Card
1 DS3 Frame Relay Module
2 Power Supplies
6 LC4 24-port SDSL Line Modules
2 LC5 24-port IDSL Line Modules
SCHEDULE A-1.
SCHEDULE B
SUPPLIER LIST PRICES
OCTOBER 1, 1998
Standard Systems
Standard System 1 [***]
Standard System 2 [***]
Standard System 3 [***]
Standard System 4 [***]
LINE MODULES
LC4 24-port SDSL Line Module [***]
LC5 24-port IDSL Line Module [***]
PARTS
Chassis
CE200 Chassis (including 1 Buffer Card, [***]
1 System Control Module and 1 Power
Supply)
Chassis Components
Buffer Card [***]
System Control Module [***]
Power Supply [***]
WAN Interfaces
V.35 WAN Module (2 port) [***]
HSSI WAN Module [***]
DS-3 Frame Module [***]
Modems
CR201 SDSL Modem [***]
CR201 IDSL Modem [***]
Additional FSA/ICA Support [***]
Repairs Not Covered by Warranty [***]
1
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
No Trouble Found [***]
If repairs are conducted at a location other than a Supplier facility, then
reasonable travel time and expenses will be included. The minimum service
charge will be for [***] of work, regardless of time actually worked.
2
[***] = Certain information on this page has been omitted and filed separately
with the Commission. Confidential treatment has been requested with
respect to the omitted portions.
APPENDIX 2
1. CopperEdge 200 Fast Packet DSL Concentrators shall conform to the
description, shape, performance and functions set forth in the Supplier's
CopperEdge 200 Installation and Operation Guide, a copy of which has been
provided to Lucent.
2. CopperView EMS Element Management Systems shall conform to the description,
shape, performance and functions set forth in the Supplier's CopperView EMS
Installation and Operation Guide, a copy of which has been provided to
Lucent.
3. Copper Rocket Model 201 SDSLs shall conform to the description, shape,
performance and functions set forth in the Supplier's CopperRocket 201 SDSL
Installation and Operating Guide, a copy of which has been provided to
Lucent.
4. Copper Rocket Model 201 IDSLs shall conform to the description, shape,
performance and functions set forth in the Supplier's CopperRocket 201 IDSL
Installation and Operating Guide, a copy of which has been provided to
Lucent.
Agreement No. ___________
Page 1 of 5
Appendix 3
Appendix 3 Quality
QUALITY
(A) Supplier commits to ensure that all manufacturing, and design operations,
including any key sub-contractor, or contract manufacturing suppliers,
which contribute to the design, development, production, delivery and
service of material are ISO 9000 registered by an accredited Registrar
pursuant to Section _____ QUALITY.
(B) Supplier commits to having a continuous improvement program in place which
will allow it to attain and maintain "acceptable" ratings (or equivalent)
on all quality system elements per Supplier Capability Assessment (SCA), or
other type of Company assessment, as periodically performed by Company. An
"acceptable" element is defined as one where the quality system meets the
"general intent" of the quality system element and is fully implemented to
maintain the quality system and product quality. No significant
deficiencies encountered that would jeopardize the quality system, and
product quality and/or reliability.
(C) Supplier commits to establish quality control (qc) verification points
throughout the manufacturing process. These verification points should be
located in-process as well as after PRODUCT has completed all manufacturing
operations. The scope of these qc verification points shall be to validate,
through visual and mechanical inspections and tests, and with the use of
statistically valid sampling plans, that PRODUCT conforms to Supplier's
manufacturing, product and process specifications, standards of acceptable
workmanship, as well as other specification's which may be provided by
Company. Company reserves the right to review these qc points and make
suggestions for improvement. Supplier commits to address these suggestions
through the implementation of appropriate corrective actions.
(D) Supplier commits to establish an end of the line Quality Assurance product
audit. The focus of this audit shall be to replicate user application of
PRODUCT as specified by Company's customer. Test and examination of PRODUCT
under the quality audit shall be at a system level, and shall include but
is not limited to:
a) A system for continuous monitoring of all primary and ancillary
product functions and fault detection of the PRODUCT while under
this test.
Supplier shall continuously review customer return data to ensure that the
scope of the product quality assurance audit function includes the
requirement(s)/condition(s) under which the return failed.
Supplier shall perform a detailed failure mode analysis of all PRODUCT
found defective through the quality assurance audit in line with the
requirements and process outlined in paragraph F.
Supplier agrees to provide to Company on a monthly basis, results of the
quality assurance product audit in a format specified by Company.
(E) Supplier commits to establishing a program of tracking return rates. The
following is the suggested method for tracking, calculating, and tracking
customer returns. Company and supplier may mutually agree to modify this
method as appropriate. PRODUCT which has been in operation for any period
of time up to, and including one full year shall be considered part of this
tracking program. For the purpose of this section, the term "product" shall
be used to define the lowest replaceable unit (lru) of PRODUCT supplied to
Company.
For the purpose of calculating the return rate, the following definitions
apply:
Lucent Technologies Proprietary
Agreement No. ___________
Page 2 of 5
Appendix 3
RTM(x) = The quantity of lru's which were manufactured in the Target
Month;(x) that have been returned during the period beginning the 4th month
after the Target Month and ending the 15th month from the Target Month.
PTM(x) = The total number of lru's in the Target Month;(x). All returns
will be included in the calculation of the return rate including, but not
limited to, failures, no trouble founds, and recalls. Failed safety devices
are excluded. A Target Quarter Return Rate (TQRR) is to be calculated using
the following equation:
TQRR = 10,000 x [[RTM(1)+RTM(2)+RTM(3)]/[PTM(1)+PTM(2)+PTM(3)]]
Where:
"(1)" refers to the first month of the Target Quarter
"(2)" refers to the second month of the Target Quarter
"(3)" refers to the third month of the Target Quarter
This calculation shall be made on a quarterly basis for the product
manufactured under this contract.
The Supplier agrees to update and report TQRR's on a quarterly basis to
Company, and to comply with the Annual Return Rate (ARR) requirement in
accordance with the following schedule:
--------------------------------------------------------------------------------------
Manufacture Year ARR Requirement Annual Measurement Due
--------------------------------------------------------------------------------------
Jan xxxx- Dec xxxx 360 in 10,000 April, xxxx
--------------------------------------------------------------------------------------
Jan xxxx Dec xxxx 240 in 10,000 April, xxxx
--------------------------------------------------------------------------------------
The ARR is 10,000 times the summation of the number of returns received for
the Target Months of the Manufacture Year divided by the summation of the
manufacturing populations for the Target Months of the Manufacture Year.
Supplier commits to provide to company on a monthly basis, the cumulative
year to date results of the ARR until the annual measurement requirement is
due.
(F) Supplier commits to establishing a system for tracking and analysis all
PRODUCT returned by Company to it, as well as any PRODUCT failures which
occur through the company's end of the line quality assurance audit. For
all PRODUCT in the above two categories, supplier shall perform a failure
mode analysis, which at a minimum will be down to the component level.
Component level failure modes will be recorded, and failed components found
defective will be accumulated for the purpose of determining repetitive
occurrences.
PRODUCT shall be considered defective if it fails to meet the warranty
specifications under this Agreement (including performance and appearance
Specifications) or if during customer testing, installation, or use, the
PRODUCT fails to operate as expected or specified.
If the analysis of a Company return is found to be within the
specifications of this agreement (i.e., a no trouble found condition), then
Supplier shall track these no trouble found conditions and notify Company
of said findings at a minimum of a monthly interval, so that appropriate
investigative measures may be taken to determine the root cause.
(G) If a Target Quarter Return Rate (TQRR) is found to exceed the applicable
ARR requirements specified in paragraph E, or repetitive occurrences are
observed with regard to
Lucent Technologies Proprietary
Agreement No. ___________
Page 3 of 5
Appendix 3
component level failures then the supplier shall provide a written
Corrective Action Report to the Company, explaining in detail the nature of
the problem detected, and the step(s) Supplier proposes to correct the
problem. As part of the plan to correct the problem, it is agreed that the
Supplier shall:
a) Incorporate the remedy in affected PRODUCT.
b) Ship all subsequent PRODUCT incorporating the required modification
correcting the problem at no additional charge to Company; and
c) Repair and/or replace previously shipped PRODUCT that may contain
the same problem trend. In the event that Company incurs costs due
to such repair and/or replacement, including but not limited to
labor and shipping costs, Supplier shall reimburse Company for such
costs. Supplier shall bear shipping costs and risk of in transit
loss and damage for such repaired and/or replaced PRODUCT when
shipped from supplier to Company or customer..
Supplier and Company shall mutually agree in writing as to the
implementation schedule of the corrective action plan. Supplier agrees to
use its best efforts to implement the plan in accordance with the agreed
upon schedule. It is also agreed that the Company shall be entitled to
postpone at no charge to Company, further deliveries of orders until such
time as the remedy is implemented consistent with this Section.
(H) As part of a program of continuous improvement, Supplier agrees to
establish annually, improvement goals for a series of key quality
objectives. These goals should include, but are not limited to a) customer
return rates as specified in Section E, b) Quality Assurance product
quality audit defect rates, c) final system test yields. Supplier agrees to
track these goals on a monthly basis, and to commit the resources necessary
for the attainment of these goals.
Lucent Technologies Proprietary
Agreement No. ___________
Page 4 of 5
Appendix 3
(I) The following paragraph summarizes the requirements for providing data
and information to Company as per paragraphs A through H.
-----------------------------------------------------------------------------------------------
Ref. Data Required Frequency Company's
Par. # Recipient
-----------------------------------------------------------------------------------------------
A Corrective Action As dictated by Assessment Lead Assessor
Response to Assessment
-----------------------------------------------------------------------------------------------
B ISO Registration copies When requested by Company To be specified by
Company
-----------------------------------------------------------------------------------------------
C Corrective Action As dictated by the audit To be specified by
response to company's Company
audit of QC practices
-----------------------------------------------------------------------------------------------
D Quality Assurance Results Monthly Company's quality QA
contact
-----------------------------------------------------------------------------------------------
E Monthly Return Rate data Quarterly Company's quality QA
contact
-----------------------------------------------------------------------------------------------
E Annual Return Rate Monthly Company's quality QA
Summary Results contact
-----------------------------------------------------------------------------------------------
F "No trouble founds" Monthly Company's quality QA
summary data on customer contact
returns
-----------------------------------------------------------------------------------------------
G Corrective Action Report As dictated by Supplier's Company's quality QA
data on repetitive contact
component level failure
mode analysis (FMA) on
customer returns
-----------------------------------------------------------------------------------------------
G Corrective Action Report If return rates exceed Company's quality QA
pre-established thresholds contact
per paragraph E
-----------------------------------------------------------------------------------------------
H Quality Improvement Goals Annually Company's quality QA
contact
-----------------------------------------------------------------------------------------------
(J) In the event that the Supplier 1) exceeds the Annual Return Rate
------------------------------
established in Section E by more than 50% during any period of three months or
---
more, then Company may 1a) develop and implement such remedy for already
purchased PRODUCT defined under the Corrective Action Plan, the cost of which
will be borne by the Supplier; and/or 2a) cancel or postpone other orders and/or
terminate this Agreement subject to the provisions of the TERMINATION Section.
Supplier reserves the right, as a substitution for 1a) to 2a) above, to instruct
Company to return all PRODUCT that is affected by the problem for full refund,
payable by Supplier to Company within thirty (30) days after receipt of returned
PRODUCT (with risk of loss or in-transit damage to be borne by Supplier).
In the event that Supplier fails to complete and issue Corrective Action Reports
as required in Section G, Company may put Supplier on notice that continued non-
compliance for more than 30
Lucent Technologies Proprietary
Agreement No. ___________
Page 5 of 5
Appendix 3
days could result in cancellation or postponement of orders and/or terminate
this Agreement subject to the provisions of the TERMINATION Section.
Lucent Technologies Proprietary
Agreement No. GA10097
Page 1 of 2
Appendix 4
APPENDIX 4
ENGINEERING CHANGE CONTROL PROCEDURES
Supplier agrees to perform and administer all "Product Changes" in accordance
with Xxxx Communications Research document GR 209 CORE, Issue 2, January 1996,
titled "Generic Requirements for Product Change Notices", which is incorporated
herein by reference.
Supplier may make changes to PRODUCT, modify drawings, or make changes to
manufacturing specifications, provided the changes, modifications, or
substitutions DO NOT have an impact on the performance, reliability, form, fit,
or function of the PRODUCT without prior notification to Company. Supplier
shall maintain written records of all such changes, and make these records
available for Company's review upon request.
For such changes or modifications which DO have an impact on performance,
reliability, form, fit, or function, Supplier shall identify each such change or
modification in accordance with the classifications contained in the above Xxxx
Communications Research document via a Product Change Notification (PCN) form.
The Company shall immediately acknowledge receipt of the PCN to the
address/contact as stated on the PCN form and shall have thirty (30) calendar
days to advise Supplier if the proposed change or modification is unacceptable.
If Company notifies Supplier as required herein, that the proposed change or
modification is unacceptable, Supplier shall not implement such change or
modification. Company may reject any PRODUCT offered by Supplier which has been
changed or modified in a manner unacceptable to Company.
If Company has not notified Supplier that the change or modification is
unacceptable within thirty (30) calendar days following issuance of the Change
Notification, Supplier shall implement the change or modification as described
in the Change Notification.
If during the review of a proposed Product Change Notification, which has a
classification of either A or AC, issued by Supplier during the Warranty period
of the affected PRODUCT, the Company determines that implementation of the
PRODUCT CHANGE will cause the Company to incur "unreasonable expenses" such as,
but not limited to, expenses resulting from escorting Supplier's personnel to
numerous Company locations containing affected PRODUCT or repeated product
changes to the same item of PRODUCT within a one (1) year time period, the
Company shall so notify Supplier, in writing, prior to the implementation of
such PRODUCT CHANGE.
Upon such notification, the Company and Supplier shall jointly determine the
implementation procedure which will utilize the Supplier's and/or Company's
personnel in the most cost effective manner.
Agreement No. GA10097
Page 2 of 2
Appendix 4
If Supplier and the Company conclude the agreed to implementation procedure will
probably cause the Company to incur "unreasonable expenses", the Company and
Supplier shall jointly determine the likely extent of such expenses and agree,
in writing, to a "not to exceed" estimate for such expenses. In no event shall
such estimate exceed the Company's purchase price for the PRODUCT to be changed.
The Company shall track and record all such expenses associated with the PRODUCT
CHANGE. Upon completion of its efforts, the Company shall submit to Supplier,
for reimbursement by Supplier, an invoice of the Company's "unreasonable
expenses" within forty-five (45) calendar days after the Company's receipt of
such invoice.
Issuing a Class A or AC product Change Notification shall not constitute an
agreement to provide such a change, but shall be construed as a recommendation
by the Supplier that the change is absolutely necessary.
Appendix 5
DEMAND PULL PROCEDURES [DRAFT]
(A) For Product items mutually agreed upon by Lucent and Supplier, Lucent shall
issue an annual order during the term of this Agreement which will state
Lucent's estimated annual purchases for such Product (the "EAU order"). Each
week Lucent shall provide Supplier with a fifty-two (52) week forecast for each
such Product (the "Forecast"). Supplier shall reference the EAU order number on
its shipping and invoicing documents. Said EAU order and Forecast shall be for
planning purposes only and, except to the extent set forth in paragraph D below,
shall not be deemed a commitment to purchase or supply the amount set forth in
the EAU order or Forecast.
(B) Supplier shall maintain (1) an inventory of Supplier-inspected finished
Product equivalent to weeks _______________ of the then current Forecast and (2)
Product work in process and raw materials in the aggregate sufficient to
manufacture such Product equivalent to weeks ______________ or the appropriate
number as determined by Supplier and Lucent by the then current Forecast.
(C) Supplier shall review the weekly Forecast and make adjustments to Supplier's
inspected inventory, work in process and raw materials and components based upon
increases/decreases in the Forecast.
(D) Lucent's commitment for the Product shall be limited to: (1) the quantities
set forth in the "Supplier Action" column of the Forecast and (2) the inspected
inventory, work in process and raw materials as set forth in paragraph B above.
Lucent's liability for the items in this paragraph D(2) shall be limited to:
(a) For inspected inventory (not useable in Supplier's other operations or
salable to Supplier's other customers within ____ weeks following receipt of
notice from Lucent): the unit prices set forth in this Agreement;
(b) For raw materials: Supplier's purchase price of such raw materials (that
cannot be returned or are not usable in Supplier's other operations or salable
to Supplier's other customers within ____ weeks following receipt of notice from
Lucent); note: Lucent and Supplier should identify these raw materials and
associated costs as much as is possible upfront.
(c) For work in process: the actual costs incurred by Supplier in procuring
and manufacturing Product (not usable in Supplier's other operations or salable
to Supplier's other customers within ____ weeks following receipt of notice from
Lucent); less
(d) Any salvage value thereof.
If requested, Supplier agrees to substantiate such costs with proof reasonably
satisfactory to Lucent.
1
(E) Termination - Lucent may at any time, and without cause, terminate any or
all EAU orders, in whole or in part, upon written notification to Supplier. Upon
receipt of such notice, Supplier shall immediately stop work as specified in the
notice to Supplier.
Lucent's liability to Supplier with respect to such termination shall be limited
to the commitments set forth in paragraph D above. Upon such termination, the
parties shall meet promptly to determine the inspected, finished Product, work
in process and raw material for which Lucent is responsible as set forth above.
Supplier shall ship the inspected finished Product (to the extent not already in
transit) and raw materials to Lucent pursuant to shipping schedules agreed upon
by the Parties. As to the work in process, Supplier shall, at Lucent's option,
ship it to Lucent pursuant to shipping schedules agreed upon by the Parties or
scrap it.
2
Appendix 6: Non-Disclosure Agreement
NON-DISCLOSURE AGREEMENT
THIS AGREEMENT, effective as of August 24, 1998 is by and between LUCENT
TECHNOLOGIES INC., a Delaware corporation, with principal offices located at 000
Xxxxxxxx Xxxxxx, Xxxxxx Xxxx, Xxx Xxxxxx 00000, on behalf of itself and its
affiliates ("Lucent"), and COPPER MOUNTAIN NETWORKS, INC., a California
corporation, with offices located at 0000 Xxxxxxxxxxx Xxx, Xxxx Xxxx, XX 00000
("Copper Mountain") (hereinafter collectively the "Parties").
WHEREAS, the Parties, for their mutual benefit, desire to disclose to one
another certain specifications, designs, plans, drawings, software, data,
prototypes or other business, technical, and/or marketing plans and strategies,
pricing information, customer information or other business and technical
information pertaining to Lucent's purchase of devices and associated services
from Copper Mountain (hereinafter "INFORMATION"), which INFORMATION is
proprietary to the disclosing Party.
NOW, THEREFORE, the Parties agree as follows:
1. INFORMATION disclosed pursuant to this Agreement shall be used only for
the purpose of exploring, evaluating and implementing a potential OEM
relationship between the Parties, which relationship shall be
formalized in separate written agreements.
2. This Agreement is effective from the date first written above
("Effective Date") and shall continue in effect for a period of three
(3) year (the "Term") unless terminated earlier in writing by either
Party. This period may be extended or terminated earlier upon mutual
written agreement of the Parties. This Agreement applies to INFORMATION
disclosed by the Parties during the Term of the Agreement and such
INFORMATION shall be subject to the confidentiality obligations set
forth in this Agreement for three (3) years commencing on the date of
disclosure.
3. The receiving Party shall hold the INFORMATION in confidence, shall use
the INFORMATION only for the purpose set forth in Section 1 above,
shall reproduce the INFORMATION only to the extent necessary for the
above purpose and shall not disclose the INFORMATION to any third party
without the prior written approval of the other Party. The receiving
Party may, however, disclose the INFORMATION to its employees,
consultants and contractors (including, without limitation, its legal
counsel and accountants) with a need to know; provided, that the
receiving Party binds those employees, consultants and contractors to
terms at least as
- 2 -
restrictive as those stated herein, advises those employees,
consultants and contractors of their confidentiality obligations, and
indemnifies the disclosing Party for any breach of those obligations.
4. INFORMATION shall be subject to the restrictions of paragraphs 1 and
3, if it is in writing or other tangible form, only if clearly marked
as "confidential," "proprietary" or "restricted" when disclosed to the
receiving Party or, if not in tangible form, its proprietary nature
must first be announced; and it must be summarized in writing, with a
copy of the writing being furnished to the receiving Party within
thirty (30) days of the disclosure of intangible information.
5. These restrictions on the use or disclosure of INFORMATION shall not
apply to any INFORMATION:
a. which is independently developed by or for the receiving
Party or its affiliated company; or
b. which is lawfully received free of restriction from
another source; or
c. after it has become generally available to the public
without breach of this Agreement by the receiving Party or
its affiliated company; or
d. which at the time of disclosure to the receiving Party can
be demonstrated to have been known to that Party or its
affiliated company free of restriction;
e. which the disclosing Party agrees in writing is free of
such restrictions; or
f. which the receiving Party is required to disclose under
applicable laws, rules and regulations, provided that the
receiving Party shall first notify the disclosing Party of
such required disclosure and afford the disclosing Party
the opportunity to seek a protective order relating to
such disclosure.
6. Each Party shall protect the INFORMATION disclosed to it by the other
Party with at least the same degree of care as it normally exercises
to protect its own proprietary information of a similar nature.
7. Information, other than confidential INFORMATION identified and
furnished as provided above, shall not be subject to any restriction
- 3 -
by the disclosing Party as to the receiving Party's disclosure or use
thereof.
8. No license to a Party, under any trademark, patent, copyright, mask
work protection right or any other intellectual property right, is
either granted or implied by the conveying of INFORMATION to that
Party. None of the INFORMATION which may be disclosed or exchanged by
the Parties shall constitute any representation, warranty, assurance,
guarantee or inducement by either Party to the other of any kind, and,
in particular, with respect to the non-infringement of trademarks,
patents, copyrights, mask work protection rights or any other
intellectual property rights, or other rights of third persons or of
either Party.
9. Neither this Agreement nor the disclosure or receipt of INFORMATION
shall constitute or imply any promise or intention to make any purchase
of products or services or to make any equity investment by either
Party or its affiliated companies or any commitment by either Party or
its affiliated companies with respect to the present or future
marketing of any product or service.
10. All INFORMATION shall remain the property of the disclosing Party and
shall be returned upon written request or upon the receiving Party's
determination that it no longer has a need for such INFORMATION. The
receiving Party may, however, retain one copy of all written materials
returned to provide an archive record of the disclosure; provided that
such archival copy may not be used for any other purpose and shall
remain subject to the terms and conditions of this Agreement.
11. All INFORMATION in written form shall be furnished only to the
following representatives, or successor representatives that have been
designated in writing:
Lucent Technologies Inc.
Name: Xxxxx Manchester
------------------------------------
Title: Director
------------------------------------
Address: 00 Xxxxxxxx Xxxx
------------------------------------
Whippany
------------------------------------
Xxx Xxxxxx 00000
------------------------------------
- 4 -
Telephone: (973) 386
------------------------------------
Copper Mountain Networks, Inc.
Name: Xxxxxxx Xxxxxxx
------------------------------------
Title: Vice President, Business Development
------------------------------------
Address: 0000 Xxxxxxxxxxx Xxx
------------------------------------
Xxxx Xxxx, XX 00000
------------------------------------
Telephone: (000) 000-0000
------------------------------------
12. This Agreement shall be governed by the laws of the State of New York,
USA, applicable to contracts entered into and to be wholly performed
within said state, without reference to choice or conflict of law rules
otherwise applicable.
13. If any provision of the Agreement is held by a court or other
adjudicatory body to be unenforceable, such provision will be severed
from this Agreement, and the balance of the Agreement will remain in
full force and effect.
14. If a dispute arises with respect to this Agreement, the Parties agree
to make a good faith effort to resolve the dispute through negotiations
between themselves. If not thus resolved, either Party may refer the
dispute to a sole arbitrator selected jointly by the Parties or to the
American Arbitration Association ("AAA") for arbitration. The
arbitration shall be governed by the United States Arbitration Act and
judgment on the award may be entered by any court having jurisdiction.
The arbitrator shall not limit, expand or modify the terms of the
Agreement nor award damages in excess of compensatory damages, and each
Party waives any claim to such excess damages. A request by a Party to
a court for interim protection shall not affect either Party's
obligation hereunder to arbitrate. Each party shall bear its own
expenses and an equal share of all cost and fees of the arbitration.
Any arbitrator selected shall be competent in the legal and technical
aspects of the subject matter of this Agreement. The content and result
of arbitration shall be held in confidence by all participants, each of
whom will be bound by an appropriate confidentiality agreement.
15. This Agreement constitutes the entire understanding between the Parties
hereto regarding the INFORMATION and merges all prior discussions
between them relating thereto. No amendment or modification of this
Agreement shall
- 5 -
be valid or binding on the Parties unless made in writing and signed on behalf
of each of the Parties by their respective duly authorized officers or
representatives.
IN WITNESS WHEREOF, the parties have executed the Agreement on the
respective dates entered below.
LUCENT TECHNOLOGIES INC. COPPER MOUNTAIN
NETWORKS, INC.
By: /s/ XXXXX X. MANCHESTER By: /s/ XXXXXXX XXXXXXX
----------------------- ------------------------
(Signature) (Signature)
Xxxxx Manchester Xxxxxxx Xxxxxxx
----------------------- ------------------------
(Typed Name) (Typed Name)
Director Vice President, Business
Development
----------------------- ------------------------
(Title) (Title)
11/12/98 11/12/98
----------------------- ------------------------
(Date Signed) (Date Signed)
Agreement No. GA10097
Page 1 of 8
Appendix 7
Warranty Eligibility System (XXX)
Transaction
The Warranty Eligibility System (XXX) tracks a serialized product from
manufacturing to the customer and provides up-to-date information about the
product's warranty status. In order to accomplish this, XXX receives data from
entities whose functions affect an item's warrantability.
At the end of the manufacturing, shipping, or repair processes, information
about an item will be sent to XXX for inclusion on the Warranty Database. This
file can be sent to XXX using
1) UNIX file transfer at,
/usr/spool/uucppublic/receive/xxx/origsystem/WESXXNNNN
where origsystem is the UNIX machine originating the file XX is a location
code entry in the location table and NNNN is the sequence number on the
header record.
2) or by placing the formatted file on a floppy disk and mailing the disk
directly to the XXX group at:
Lucent Technologies
Westwood of Lisle
Attn.: X. Xxxxxxxxxx
0000 Xxxxxxxxxxx Xx.
Xxxxx, XX 00000
Batch files received for processing by XXX must be processed by a Header Record
as attached. Following the Data Records must be a Trailer Record also attached.
The Header and Trailer Records are interrogated by XXX and messages are returned
to the sending location indicating the status of each file transmitted to XXX.
These files should be sent at least once a week, depending on volume, in order
to keep the database current. That data needs to be formatted as shown on the
following page.
HEADER RECORD
COLUMN FIELD SIZE FIELD CONTENT COMMENTS
------ ----------- ------------- --------
1-5 (05) Transaction Code &&HDR
6 (01) Blank
7-14 (08) Source of Input Job Name of Feeder
15 (01) Blank
16-19 (04) Transmission Sequence Zero Filled
Number Right Justified
20 (01) Blank
21-26 (06) Time HHMMSS
27 (01) Blank
Lucent Technologies Proprietary
Agreement No. GA10097
Page 2 of 8
Appendix 7
28-33 (06) Date MMDDYY
34-123 (90) Blank
124-125 (02) Originating Location Location that
Originates this
Transaction
ALL ALPHA REPRESENTATION SHOULD BE CAPITALIZED
TRAILER RECORD
COLUMN FIELD SIZE FIELD CONTENT COMMENTS
------ ----------- ------------- --------
1-5 (05) Transaction Code &&TLR
6 (01) Blank
7-12 (06) Record Count
13-125 (113) Blank
ALL ALPHA REPRESENTATION SHOULD BE CAPITALIZED
ADD TRANSACTION FORMAT
COLUMN FIELD SIZE FIELD CONTENT COMMENTS
------ ---------- ------------- --------
1) 1 (01) Transaction Code A
2) 2-13 (12) Item Serial Number
3) 14-23 (10) Order Number AT&T Order
Number
24-38 (15) Blank
4) 39-44 (06) Manufacture Ship Date MMDDYY
5) 45-56 (12) Blank
6) 57-61 (05) Product Line Left Justified
7) 62-86 (25) Product Identification
Number
87-123 (37) Blank
Lucent Technologies Proprietary
Agreement No. GA10097
Page 3 of 8
Appendix 7
8) 124-125 (02) Originating Location Location that
Originated
Transaction
ALL ALPHA REPRESENTATION SHOULD BE CAPITALIZED
1) One digit code representing the transaction to be performed by XXX, i.e. A
= Add, R = Repair, etc.
2) The twleve (12) digit number assigned to each unique product manufactured.
Includes a two or three digit manufacturing number (vendor code) as described in
KS-23490.
Example - 12 Digit Serial Number with a two (2) digit manufacturing id
number 9T
2 Characters last two digits of the year
2 Characters manufacturing identification number (vendor code)
2 Characters month (01 to 12) or fiscal week (21 to 72)
6 Characters sequential serial number
i.e. First Product Manufactured in March of 1997 = 979T03000001
Example - 12 Digit Serial Number with a three (3) digit manufacturing id
number of A0J
2 Characters last two digits of the year
2 Characters manufacturing identification number (vendor code)
2 Characters month (01 to 12) or fiscal week (21 to 72)
1 Character last digit of the manufacturing id number (vendor code)
5 Characters sequential serial number
ie. First Product Manufactured in March of 1997 = 97A003J00001.
3) The identifier of an order placed by a customer.
4) The date an item was shipped from manufacturing. The format is MMDDYY.
5) The item serial number of the equipment that the current item is embedded
in.
6) A five character identifier used to distinguish product for determining
warranty, which is assigned by the product manager in agreement with XXX.
7) The product identification number assigned by the product manager which
consists of the comcode. Left justified.
8) Location which originates the transaction.
SES TRANSACTION FORMAT
COLUMN FIELD SIZE FIELD CONTENT COMMENTS
------ ---------- ------------- --------
1) 1 (01) Transaction Code C
2) 2-13 (12) Item Serial Number
3) 14-23 (10) Order Number SES Order
Number
24-38 (15) Blank
4) 39-44 (06) Ship Date MMDDYY
45 (01) Blank
Agreement Xx. XX00000
Page 4 of 8
Appendix 7
5) 46-51 (06) RMA Number (B-Spec)
6) 52-55 (04) Item Number (Main Item) Right Justified
w/leading zeros
56 (01) Blank
7) 57-61 (05) Product Line Left Justified
8) 62-86 (25) Product Identification
Number
87-123 (37) Blank
9) 124-125 (02) Originating Location Location that
Originated this
Transaction
ALL ALPHA REPRESENTATION SHOULD BE CAPITALIZED
1) One digit code representing the transaction to be performed by WES, i.e. C
= SES Ship, A = Add, etc.
2) The number assigned to each unique product produced by factory. Includes a
two digit manufacturing identification number (assigned by the product manager
in agreement with WES) used in positions 3 and 4 of the 12 character serial
number as described in KS-23490.
3) The identifier of an order placed by a customer.
4) The date an item was shipped. The format is MMDDYY.
5) The returned material authorization item number.
6) Item number on the returned material authorization.
7) A five character identifier used to distinguish product for determining
warranty, which is assigned by the product manager in agreement with WES.
8) The product identification number assigned by the product manager which
consists of the comcode. Left justified.
9) Location which originates the transaction.
Lucent Technologies Proprietary
Agreement No. GA10097
Page 5 of 8
Appendix 7
RGM TRANSACTION FORMAT
COLUMN FIELD SIZE FIELD CONTENT COMMENTS
------ ---------- ------------- --------
1) 1 (01) Transaction Code G
2) 2-13 (12) Item Serial Number
3) 14-23 (10) Order Number AT&T
Order Number
24-38 (15) Blank
4) 39-44 (06) Returned Date MMDDYY
45-123 (79) Blank
5) 124-125 (02) Originating Location Location that
Originated
Transaction
ALL ALPHA REPRESENTATION SHOULD BE CAPITALIZED
1) One digit code representing the transaction to be performed by WES, i.e. A
= Add, G = RGM, etc.
2) The number assigned to each unique product produced by factory. Includes a
two digit manufacturing identification number (assigned by the product manager
in agreement with WES) used in positions 3 and 4 of the 12 character serial
number as described in KS-23490.
3) The identifier of an order placed by a customer.
4) The date an item was returned accompanied by a returned good memorandum or
an SES exchange.
5) Location which originates the transaction.
Lucent Technologies Proprietary
Agreement No. GA10097
Page 6 of 8
Appendix 7
MMC SHIP TRANSACTION FORMAT
COLUMN FIELD SIZE FIELD CONTENT COMMENTS
------ ---------- ------------- --------
1) 1 (01) Transaction Code M
2) 2-13 (12) Item Serial Number
3) 14-23 (10) Order Number Number
24-38 (15) Blank
4) 39-44 (06) MMC Ship Date MMDDYY
45-61 (17) Blank
5) 62-86 (25) Product Identification Left Justified
Number
6) 87-91 (05) Product Line
92-123 (32) Blank
7) 124-125 (02) Originating Location Location that
Originated
Transaction
ALL ALPHA REPRESENTATION SHOULD BE CAPITALIZED
1) One digit code representing the transaction to be performed by WES, i.e. A
= Add, R = Repair, M = MMC Ship, etc.
2) The number assigned to each unique product produced by factory. Includes a
two digit manufacturing identification number (assigned by the product manager
in agreement with WES) used in positions 3 and 4 of the 12 character serial
number as described in KS-23490.
3) The identifier of an order placed by a customer.
4) The date an item was shipped from the MDC or Service center.
5) The product identification number assigned by product manager which consists
of the comcode. Left justified.
6) Up to five character code used to distinguish product for determining
warranty, which is assigned by the product manager in agreement with XXX.
7) Location which originates the transaction.
REPAIR TRANSACTION FORMAT
COLUMN FIELD SIZE FIELD CONTENT COMMENTS
------ ---------- ------------- --------
1) 1 (01) Transaction Code R
2) 2-13 (12) Item Serial Number
3) 14-23 (10) Repair Order Number
4) 24-38 (15) Customer Repair Order
Number
5) 39-44 (06) Repair Date MMDDYY
Lucent Technologies Proprietary
Agreement No. GA10097
Page 7 of 8
Appendix 7
45-56 (12) Cust. Order Number
(overflow)
57-61 (05) Product Line Left Justified
7) 62-86 (25) Product Identification
Number
8) 87-101 (15) Circuit Pack Code
or Microcode
9) 102-113 (12) Circuit Pack Series
or Issue of Microcode
114-116 (03) Blank
10) 117 (01) Repair Code
11) 118-119 (02) Manufacturing Location *
12) 120-123 (04) Manufacturing Date
13) 124-125 (02) Originating Location
ALL ALPHA REPRESENTATION SHOULD BE CAPITALIZED
* Location of manufacture required for 00LL00SSSSSS Item Serial Numbers.
LL is the location code for the site affixing the label
SSSSSS is the next serial number to be assigned by the location.
This format is only valid when the item was not previously bar-coded.
1) One digit code representing the transaction to be performed by WES, i.e. A
= Add, R = Repair, etc.
2) The number assigned to each unique product produced by factory. Includes a
two digit manufacturing identification number (assigned by the product manager
in agreement with WES) used in positions 3 and 4 of the 12 character serial
number as described in KS-23490.
3) This is the order number the item was repair under, not the one it was
initially order under.
4) The customer's identifier for their repair order.
5) Date the item was repaired.
6) A five character used to distinguish product for determining warranty, which
is assigned by the product manager in agreement with XXX.
7) The product identification number assigned by product manager which consists
of the comcode. Left justified.
8) Apparatus code assigned for identification of product at cpcode level.
9) Production level of the cpcode.
10) The code that indicates what type of action was taken by repair
organization to satisfy the customer's repair order. The possible values are:
A = not repairable
K = no trouble found
R = trouble found (repairable)
11) Two digit code indicating place of manufacture.
12) Date of manufacture. MMYY
Lucent Technologies Proprietary
Agreement No. GS10097
Page 8 of 8
Appendix 7
13) Location which originates the transaction.
SUBSTITUTE TRANSACTION FORMAT
COLUMN FIELD SIZE FIELD CONTENT COMMENTS
------ ---------- ------------- --------
1) 1 (01) Transaction Code S
2) 2-13 (12) Replaced Item Serial No.
3) 14-23 (10) Repair Order No.
4) 24-38 (15) Customer Order No.
5) 39-44 (06) Substitute Date MMDDYY
6) 45-56 (12) Replacing Item Serial No.
7) 57-61 (05) Product Line Product Line
Left Justified
8) 62-86 (25) Product Identification
87-98 (12) Cust. Order No. (overflow)
99-123 (25) Blank
9) 124-125 (02) Originating Location Location that Originated Transaction
ALL ALPHA REPRESENTATION SHOULD BE CAPITALIZED
1) One digit code representing the transaction to be performed by WES, i.e. A
= Add, R = Repair, S = Substitute, etc.
2) Serial number of product returned by customer or installer. Format same as
item serial number.
3) Required if item is to be added to database.
4) The customer's identifier for their repair order.
5) Data substitution was made.
6) Item serial number of product the repair organization returned to a
customer, product withdrawn from an installation pool and added to an order,
item sent in by customer on a spares exchange. Format same as item serial
number.
7) A five character used to distinguish product for determining warranty, which
is assigned by the product manager in agreement with WES.
8) Replacing serial number's product identification number assigned by product
manager which consists of the comcode. Left justified.
9) Location which originates the transaction.
Lucent Technologies Proprietary
