RDA MICROELECTRONICS (SHANGHAI) INC. Building 2, Room 302, Floor 3, 690 Bibo Road, Zhangjiang Hi-Tech Park, Shanghai 201203, P.R.China. February 2008 Dear Sirs, Technology Licence Agreement, document number LEC-TLA-00547

Exhibit 10.5

RDA MICROELECTRONICS (SHANGHAI) INC.
Xxxxxxxx 0, Xxxx 000, Xxxxx 3,
690 Bibo Road,
Zhangjiang Hi-Tech Park,
Shanghai 201203,
P.R.China.

February 2008

Dear Sirs,

Technology Licence Agreement, document number LEC-TLA-00547

This letter refers to the terms of the Technology License Agreement to be entered into between ARM Limited whose registered office is situated at 000 Xxxxxxxx Xxxx, Xxxxxxxxx XX0 0XX, Xxxxxxx and RDA International Inc. (“RDA International”) whose principal place of business is 3328, 33/F China Xxxxxxxxx Xxxxx, 000 Xxxxxxxxx Xxxx Xxxxxxx, Xxxx Xxxx (the “Agreement”).

RDA Microelectronics (Shanghai) Inc (“RDA Microelectronics”) is a company located at Xxxxxxxx 0, Xxxx 000, Xxxxx 0, 000 Xxxx Road, Zhangjiang Hi-Tech Park, Shanghai 201203, P.R. China. RDA Microelectronics hereby represents and warrants to ARM that RDA International has the right and authority to enter into the Agreement. Further RDA Microelectronics hereby confirms that it has read the terms and conditions of the Agreement and guarantees to ARM that if RDA International is unable to perform any of its payment obligations or meet any of its liabilities under the Agreement, RDA Microelectronics hereby accepts and agrees to assume such payment obligations and liabilities in place of RDA International.

We should be grateful if you would sign and return the second copy of this letter evidencing your agreement to the terms and conditions set out herein.

Yours faithfully,

Director, ARM Limited

The terms contained herein are agreed and accepted for and on behalf of:

RDA MICRO ELECTRONICS (SHANGHAI) INC. ,

By: NAME:		/s/ Xxxxxxx Xxx Xxxxxxx Xxx
TITLE:		CEO
DATE:		2/27/2008

1 of 1

This Technology License Agreement (“TLA”) is made the 28^th day of March 2008 (“Effective Date”)

BETWEEN

ARM LIMITED whose registered office is situated at 000 Xxxxxxxx Xxxx, Xxxxxxxxx XX0 0XX, Xxxxxxx (“ARM”);

And

RDA INTERNATIONAL INC. whose principal place of business is situated at 3328, 33/F China Xxxxxxxxx Xxxxx, 000 Xxxxxxxxx Xxxx Xxxxxxx, Xxxx Xxxx (“RDA”).

WHEREAS

LICENSEE has requested ARM and ARM has agreed to license to LICENSEE certain ARM Technology (defined below) on the following terms and conditions.

1.		Definitions
1.1		“ARM Compliant Product” means the relevant ARM Compliant Product as defined in each Annex 1.
1.2		“ARM Technology” means any or all, as the context admits, of the technology identified in each Annex 1 and any Updates thereto delivered by ARM to LICENSEE.
1.3		“ASP” means the average sales price of an ARM Compliant Product in a Quarter, calculated by taking the figure for the aggregate of all invoices for the distribution of such ARM Compliant Product in such Quarter by the entity exercising the licences to manufacture or have manufactured under this TLA (notwithstanding that such distribution may be between RDA and a Subsidiary of RDA or between Subsidiaries of RDA), less; (i) any value added, turnover, import or other tax, duty or tariff payable by law thereon; and (ii) any freight and insurance costs included in the invoiced price, and dividing it by the number of units of such ARM Compliant Product accounted for under such invoices.
1.4		“Claim” means a written notice received by ARM and claiming infringement of the Intellectual Property of a third party by any of the ARM Technology and which demands that ARM cease and desist from such claimed Intellectual Property infringement.
1.5		“Confidential Information” means; (i) the ARM Technology and derivatives thereof (including any translation, modification, compilation, abridgement or other form in which the ARM Technology has been recast, transformed or adapted, but excluding silicon) and any trade secrets relating to the ARM Technology; (ii) any information designated in writing by either party, by appropriate legend, as confidential; (iii) any information which if first disclosed orally is identified as confidential at the time of disclosure and is thereafter reduced to writing and sent to the other party within thirty (30) days after its oral disclosure and designated, by appropriate legend, as confidential; and (iv) the terms and conditions of this TLA.
1.6		“Customer” means any entity that has contracted LICENSEE to design and manufacture integrated circuits for such entity.
1.7		“Designer” means, except as provided below, any entity sub-contracted by LICENSEE to provide design resource to LICENSEE for the development of an ARM Compliant Product. Designer expressly excludes any entity that, at any time, enters into a contractual arrangement with the LICENSEE which places upon LICENSEE an obligation to either or both; (a) manufacture such ARM Compliant Product for such entity; and (b) sell units of such ARM Compliant Product to such entity.

1 of 23

1.8		“Intellectual Property” means any patents, patent rights, trade marks, service marks, registered designs, topography or semiconductor mask work rights, applications for any of the foregoing, copyright, unregistered design right and any other similar protected rights in any country and to the extent recognised by any relevant jurisdiction as intellectual property, trade secrets, know-how and confidential information.
1.9		“LICENSEE” means RDA and each Subsidiary of RDA.
1.10		“Manufacturer” means any entity sub-contracted by LICENSEE to manufacture integrated circuits for LICENSEE.
1.11		“Packaging House” means any entity sub-contracted by LICENSEE to package integrated circuits for LICENSEE.
1.12		“Quarter” means each calendar quarter ending the 31st March, 30th June, 30th September and 31st December of each year.
1.13		“Subsidiary” means any company the majority of whose voting shares is now or hereafter owned or controlled, directly or indirectly, by a party hereto. A company shall be a Subsidiary only for the period during which such control exists.
1.14		“Term” means the term for which the subject ARM Technology is licensed to LICENSEE by ARM as specifically set out in Section 7 of the relevant Annex 1.
1.15		“Test House” means any entity sub-contracted by LICENSEE to test integrated circuits for LICENSEE.
1.16		“Trade Marks” means the trade marks identified in Section 6 of each Annex 1.
1.17		“Trademark Guidelines” means the guidelines for the use of ARM’s Trade Marks as set out in Annex 2 and any amendment thereto delivered to LICENSEE by ARM from time to time in accordance with the provisions of Clause 2.10.
1.18		“Updates” means any; (i) error corrections developed by or for ARM; and (ii) functional enhancements or other modifications developed by or for ARM (which ARM in its discretion decides does not constitute a new product), together with any Intellectual Property embodied therein.
2.		Licence
		ARM Technology Licence
2.1		The ARM Technology shall be licensed to LICENSEE subject to the relevant license terms identified in Section 2 of the relevant Annex 1.
		Subcontracting Design
2.2		Subject to the provisions of Clause 3 (Confidentiality), LICENSEE may exercise the right, if granted in Section 2 of the relevant Annex 1, to have ARM Compliant Products designed by any Designer, provided that; (i) LICENSEE does not grant to the Designer any license in respect of the ARM Technology for any other purpose; and (ii) LICENSEE ensures that each Designer;

	(a)		is subject to contractual obligations of confidentiality in respect of the ARM Confidential Information and ARM Technology which are in accordance with the provisions of Clause 3.3;
	(b)		is subject to a contractual obligation to deliver the designs for the ARM Compliant Products solely to LICENSEE and not to use the designs for any other purpose; and
	(c)		is subject to a contractual obligation to return any ARM Confidential Information and ARM Technology to LICENSEE on the earlier of; (1) the completion of the design; and

2 of 23

(2) the end of the contractual confidentiality period (in the agreement between LICENSEE and Designer) for the relevant ARM Confidential Information or ARM Technology.

		If any Designer breaches the obligations imposed upon it pursuant to LICENSEE’s obligations under Clauses 2.2(ii)(a) to 2.2(ii)(b), LICENSEE agrees that such breach shall be treated as a material breach of this TLA by LICENSEE which shall entitle ARM to terminate this TLA in accordance with the provisions of Clause 14.2 and LICENSEE shall hold ARM harmless from and keep ARM indemnified against all and any loss, liability, costs, damages, expenses (including the fees of lawyers and other professionals), suffered, incurred or sustained as a result of or in relation to such breach.
		Customer Collaboration
2.3		Subject to the provisions of Clause 3 (Confidentiality), LICENSEE may exercise the right, if granted in Section 2 of the relevant Annex 1, to have ARM Compliant Products designed by any Customer provided that; (i) LICENSEE does not grant to the Customer any license in respect of the ARM Technology for any purpose other than for collaborating on the design of ARM Compliant Products with LICENSEE and; (ii) LICENSEE ensures that each Customer;

	(a)		is subject to contractual obligations of confidentiality in respect of the ARM Confidential Information and ARM Technology which are in accordance with the provisions of Clause 3.4;
	(b)		is subject to a contractual obligation to deliver the designs for the ARM Compliant Products solely to LICENSEE and not to use the designs for any other purpose; and
	(c)		is subject to a contractual obligation to return any ARM Confidential Information and ARM Technology to LICENSEE on the earlier of; (1) the completion of the design; and (2) the end of the contractual confidentiality period (in the agreement between LICENSEE and Customer) for the relevant ARM Confidential Information or ARM Technology.

		If any Customer breaches the obligations imposed upon it pursuant to LICENSEE’s obligations under Clauses 2.3(i)(a) to 2.3(i)(c), LICENSEE agrees that such breach shall be treated as a material breach of this TLA by LICENSEE which shall entitle ARM to terminate this TLA in accordance with the provisions of Clause 14.2 and LICENSEE shall hold ARM harmless from and keep ARM indemnified against all and any loss, liability, costs, damages, expenses (including the fees of lawyers and other professionals), suffered, incurred or sustained as a result of or in relation to such breach.
		Subcontracting Manufacture
2.4		Subject to the provisions of Clause 3 (Confidentiality), LICENSEE may exercise the right, if granted in Section 2 of the relevant Annex 1, to have ARM Compliant Products manufactured by a Manufacturer provided that; (i) LICENSEE does not grant to the Manufacturer any license in respect of the ARM Technology for any purpose other than for manufacturing ARM Compliant Products solely for LICENSEE; and (ii) LICENSEE ensures that each Manufacturer;

	(a)		is subject to contractual obligations of confidentiality in respect of the ARM Confidential Information and ARM Technology which are in accordance with the provisions of Clause 3.2;
	(b)		is subject to a contractual obligation to use the ARM Confidential Information and ARM Technology solely for the purpose of supplying units of the ARM Compliant Products solely to LICENSEE; and

3 of 23

(c) is subject to a contractual obligation to return any ARM Confidential Information and ARM Technology to LICENSEE on the earlier of; (1) the completion of the manufacture; and (2) the end of the contractual confidentiality period (in the agreement between LICENSEE and Manufacturer) for the relevant ARM Confidential Information or ARM Technology.

		If any Manufacturer breaches the obligations imposed upon it pursuant to LICENSEE’s obligations under Clauses 2.4(ii)(a) to 2.4(ii)(b), LICENSEE agrees that such breach shall be treated as a material breach of this TLA by LICENSEE which shall entitle ARM to terminate this TLA in accordance with the provisions of Clause 14.2 and LICENSEE shall hold ARM harmless from and keep ARM indemnified against all and any loss, liability, costs, damages, expenses (including the fees of lawyers and other professionals), suffered, incurred or sustained as a result of or in relation to such breach.
		Subcontracting Testing
2.5		Subject to the provisions of Clause 3 (Confidentiality), LICENSEE may exercise the right, if granted in Section 2 of the relevant Annex 1, to have tested ARM Compliant Products by a Test House provided that; (i) LICENSEE does not grant to the Test House any license in respect of the ARM Technology for any purpose other than for testing ARM Compliant Products solely for LICENSEE; and (ii) LICENSEE ensures that each Test House;

	2.5.1		is subject to contractual obligations of confidentiality in respect of the ARM Confidential Information and ARM Technology which are in accordance with the provisions of Clause 3.5;
	2.5.2		is subject to a contractual obligation to use the ARM Confidential Information and ARM Technology solely for the purpose of supplying units of the tested ARM Compliant Products solely to LICENSEE; and
	2.5.3		is subject to a contractual obligation to return any ARM Confidential Information and ARM Technology to LICENSEE on the earlier of; (1) the completion of the testing; and (2) the end of the contractual confidentiality period (in the agreement between LICENSEE and Test House) for the relevant ARM Confidential Information or ARM Technology.

		If any Test House breaches the obligations imposed upon it pursuant to LICENSEE’s obligations under Clauses 2.5(ii)(a) to 2.5(ii)(c), LICENSEE agrees that such breach shall be treated as a material breach of this TLA by LICENSEE which shall entitle ARM to terminate this TLA in accordance with the provisions of Clause 14.2 and LICENSEE shall hold ARM harmless from and keep ARM indemnified against all and any loss, liability, costs, damages, expenses (including the fees of lawyers and other professionals), suffered, incurred or sustained as a result of or in relation to such breach.
2.6		LICENSEE may exercise the right, if granted in Section 2 of the relevant Annex 1, to have ARM Compliant Products be tested and packaged by a Packaging House provided that (i) LICENSEE does not grant to the Packaging House any license in respect of the ARM Technology for any purpose other than for packaging and testing ARM Compliant Products solely for LICENSEE; and (ii) LICENSEE ensures that each Packaging House is subject to a contractual obligation to return any ARM Confidential Information and ARM Technology to LICENSEE on the completion of the packaging.
		If any Packaging House breaches the obligations imposed upon it pursuant to LICENSEE’s obligations under Clause 2.6, LICENSEE agrees to take all reasonable actions to cure such breach. If LICENSEE is unable to cure such breach within thirty (30) days, then LICENSEE shall terminate the right of such Packaging House to package and test ARM Compliant Products for

4 of 23

		LICENSEE and shall ensure that the Packaging House returns to LICENSEE any ARM Compliant Products in the Packaging House’s possession.
		Intercompany Matters
2.7		Any breach of this TLA by a Subsidiary of RDA shall entitle ARM to terminate this TLA in accordance with the provisions of Clause 14.2 as if RDA were the party in breach. Any termination of this TLA in accordance with the provisions of Clause 14.2 shall be effective in respect of RDA and all Subsidiaries.
		Any rights granted to any Subsidiary hereunder shall automatically terminate upon such Subsidiary ceasing to be a Subsidiary.
		In the event that a Subsidiary is in breach of any of the terms of this TLA, RDA shall hold harmless and indemnify ARM against all and any loss, liability, costs, damages, expenses (including the reasonable fees of lawyers and other professionals) suffered, as a result of or in connection with such breach.
		Licence Restrictions
2.8		Except as specifically licensed in accordance with Clause 2.1, LICENSEE acquires no right, title or interest in any ARM Confidential Information, ARM Technology or any Intellectual Property embodied therein. In no event shall the licenses granted in accordance with Clause 2.1 be construed as granting LICENSEE, expressly or by implication, estoppel or otherwise, a license to use any ARM technology except the ARM Technology.
		Except as expressly licensed in accordance with Clause 2.1, no right is granted to LICENSEE to sublicense the rights granted to LICENSEE under this TLA.
		Intellectual Property Notices
2.9		LICENSEE shall reproduce and not remove or obscure any notice incorporated in the ARM Technology by ARM to protect ARM’s Intellectual Property or to acknowledge the Intellectual Property of any third party. LICENSEE shall incorporate and shall require that any Designer, Customer, Manufacturer and Test House to which any ARM Technology is provided in accordance with the terms of this TLA, incorporates corresponding notices and such other markings and notifications as ARM may reasonably require on all copies of the ARM Technology and any derivatives thereof (including any translation, modification, compilation, abridgement or other form in which the ARM Technology has been recast, transformed or adapted) created by LICENSEE, Designer, Customer, Manufacturer, Test House or Packaging House, as the case may be.
		ARM Trade Marks
2.10		ARM hereby grants to LICENSEE a non-transferable (subject to Clause 16.3), non-exclusive, royalty-free, world-wide license to use the Trade Marks in connection with the promotion and sale of products developed under the licences granted in this TLA.
		LICENSEE shall use the Trade Marks, in accordance with the Trademark Guidelines. ARM shall have the right to revise the Trademark Guidelines and Section 6 of any Annex 1. Any such revisions shall be effective with respect to printed materials and products to be produced or manufactured after ninety (90) days from receipt of ARM’s written notice specifying the revisions to LICENSEE.
		Upon request from ARM, LICENSEE shall submit samples of documentation, packaging, and promotional or advertising materials bearing the Trade Marks to ARM so that ARM may verify compliance with the Trademark Guidelines. In the event that any documentation, packaging, promotional or advertising material fails to comply with the Trademark Guidelines, ARM shall notify LICENSEE and LICENSEE shall rectify such documentation, packaging, and promotional

5 of 23

		or advertising materials so as to comply with the Trademark Guidelines and cease using any such non-compliant materials as soon as reasonably possible after the date of ARM’s notice.
		LICENSEE agrees to provide reasonable assistance to ARM in maintaining the validity of the Trade Marks. Upon ARM’s request, LICENSEE shall provide, free of charge, a reasonable number of samples of the use of the Trade Marks for the purpose of trademark registration or renewal. Upon request, LICENSEE shall at ARM’s expense execute any documents required by the applicable laws of any jurisdiction for the purpose of either or both registering and maintaining the Trade Marks.
		Except as provided by the terms of this TLA, LICENSEE shall not use or register, in any jurisdiction, any trademark, service xxxx, device or logo or any word or xxxx confusingly similar to any of the Trade Marks.
3.		Confidentiality
		Restricted Disclosure
3.1		Except as expressly provided by Clauses 3.2, 3.3, 3.4, 3.5, 3.6 and 3.7, each party shall maintain in confidence the Confidential Information disclosed by the other party and apply security measures no less stringent than the measures that such party applies to its own like information, but not less than a reasonable degree of care, to prevent unauthorised disclosure and use of the Confidential Information. The period of confidentiality shall be indefinite with respect to each party’s Confidential Information.
		Permitted Disclosure to Manufacturers
3.2		LICENSEE may disclose the (i) the ARM Technology marked “M” in any Annex 1 and any translation, modification, compilation, abridgement or other form in which the ARM Technology marked “M” has been recast, transformed or adapted; (ii) any GDSII created by or for LICENSEE from the synthesizable RTL licensed under any Annex 1 ; and (iii) any masks created from the GDSII by or for LICENSEE, to a Manufacturer pursuant to the exercise of any have manufactured rights (if granted in Section 2 of the relevant Annex 1) solely for the purposes of having ARM Compliant Products manufactured for LICENSEE by such third party and under a non-disclosure agreement containing substantially similar terms to this Clause 3, except that the confidentiality period for each deliverable shall be, at a minimum, of five (5) years from the date of disclosure.
		Permitted Disclosure to Designers
3.3		LICENSEE may disclose the ARM Technology marked “D” in any Annex 1 and any translation, modification, compilation, abridgement or other form in which the ARM Technology marked “D” has been recast, transformed or adapted, to a Designer pursuant to the exercise of the have designed rights (if granted in Section 2 of the relevant Annex 1) solely for the purposes of having ARM Compliant Products designed for LICENSEE by such third party and under a non-disclosure agreement containing substantially similar terms to this Clause 3, including the confidentiality period for each deliverable determined in accordance with the provisions of Clause 3.1.
		Permitted Disclosure to Customers
3.4		LICENSEE may disclose the ARM Technology marked “CS” in any Annex 1 and any translation, modification, compilation, abridgement or other form in which the ARM Technology marked “CS” has been recast, transformed or adapted to a Customer solely for the purposes of collaborating on the design of ARM Compliant Products for such third party and under a non-disclosure agreement containing substantially similar terms to this Clause 3, including the confidentiality period for each deliverable determined in accordance with the provisions of Clause 3.1.

6 of 23

		Permitted Disclosure to Test Houses
3.5		LICENSEE may disclose (i) the ARM Technology marked “T” in any Annex 1 and any translation, modification, compilation, abridgement or other form in which the ARM Technology marked “T” has been recast, transformed or adapted; and (ii) any ATPG test vectors created by or for LICENSEE from the Synthesizable RTL (defined in the relevant Annex 1), to a Test House pursuant to the exercise of the have tested rights (if granted in Section 2 of the relevant Annex 1) solely for the purposes of having ARM Compliant Products tested for LICENSEE by such third party and under a non-disclosure agreement containing substantially similar terms to this Clause 3, except that the confidentiality period for each deliverable shall be, at a minimum, five (5) years from the date of disclosure.
		Other Permitted Disclosures
3.6		Either party may disclose Confidential Information received from the other party in the following circumstances;

	(i)		disclosure to third parties to the extent that the Confidential Information is required to be disclosed pursuant to a court order or as otherwise required by law, provided that the party required to make the disclosure promptly notifies the other party upon learning of such requirement and has given the other party a reasonable opportunity to contest or limit the scope of such required disclosure (including but not limited to making an application for a protective order);
	(ii)		disclosure to nominated third parties under written authority from the original discloser of the Confidential Information; and
	(iii)		disclosure to the receiving party’s legal counsel, accountants or professional advisors to the extent necessary for them to advise upon the interpretation or enforcement of this TLA.

		Permitted Disclosure of LICENSEE Confidential Information
3.7		LICENSEE royalty reports may be disclosed in confidence to ARM’s financial and legal advisors. In addition, ARM may disclose the total unit sales, from time to time, of ARM Compliant Products provided that the unit sales of such products by LICENSEE are not separately identifiable or deducible therefrom.
		ARM shall be permitted to disclose LICENSEE Confidential Information to Subsidiaries of ARM subject to the same terms and conditions of confidentiality as are set out in this TLA.
		Restricted Use
3.8		LICENSEE agrees that it shall not use any of ARM’s Confidential Information other than pursuant to and in accordance with the exercise of any of the licences granted under this TLA. Without limiting the generality of the foregoing, LICENSEE shall not use ARM’s Confidential Information; (i) for determining if any features, functions or processes provided by the ARM Technology or disclosed by the ARM Confidential Information are covered by any patents or patent applications owned by LICENSEE; or (ii) for developing technology or products which avoid any of ARM’s Intellectual Property licensed hereunder; or (iii) as a reference for modifying existing patents or patent applications or creating any continuation, continuation in part, or extension of existing patents or patent applications or (iv) for generating data for publication or disclosure to third parties, which compares the performance or functionality of the ARM Technology with any other products created by LICENSEE or a third party, without obtaining ARM’s prior written consent.
		Excepted Information
3.9		The provisions of this Clause 3 shall not apply to information which;

7 of 23

	(i)		is known to and has been reduced to tangible form by the receiving party prior to its receipt provided that such information is not already subject to any obligations of confidentiality; or
	(ii)		is in the public domain at the time of receipt or later becomes part of the public domain without breach of the confidentiality obligations in this TLA; or
	(iii)		is received from a third party without any breach of any obligation of confidentiality in respect of such information provided that such information is not subject to any continuing obligations of confidentiality; or
	(iv)		is identified as (N) in Section 1 of the relevant Annex 1 of this TLA.

4.		Verification
4.1		Prior to the distribution of any integrated circuit incorporating ARM Technology manufactured by or for LICENSEE under the licences granted in Section 2 of any Annex 1, LICENSEE shall verify such ARM Technology to the extent required by and in accordance with the verification procedure set out in Section 3 of the relevant Annex 1.
5.		Delivery
5.1		ARM shall use reasonable efforts to deliver the ARM Technology in each Annex 1 to LICENSEE on or before the delivery dates set out in Section 1 of the relevant Annex 1. Subject to the payment of the relevant Fees (defined in Clause 6.1), ARM shall deliver Updates for any ARM Technology to LICENSEE as soon as reasonably possible after such Update is made generally available by ARM.
6.		Fees and Royalties
		Fees
6.1		RDA shall pay, to ARM, fees (“Fees”) as set out in and in accordance with Section 8 of the relevant Annex 1.
		Royalties
6.2		If provided for in Section 8 of a relevant Annex 1, RDA shall pay, to ARM, a royalty (“Royalty”) in accordance with the provisions of such Annex 1.
		Any distribution of ARM Compliant Products by LICENSEE shall, in the absence of evidence to the contrary, be deemed to be distributed under the licences granted to LICENSEE under this TLA and LICENSEE shall pay Royalties to ARM accordingly. The burden of proof for rebutting the above presumption shall be on LICENSEE.
		Royalty Report
6.3		RDA shall submit a report within thirty (30) days after the end of each Quarter, containing at least the information required by the form set out in Section 8 of each Annex 1.
		Fair Market Value
6.4		For all transactions LICENSEE shall ensure that such transactions are conducted so that the ASP of any ARM Compliant Product are not manipulated for the purpose of reducing the Royalties payable to ARM under this TLA. The invoice price of any ARM Compliant Product shall be deemed to be the higher of the actual invoice price and what the invoice price of the ARM Compliant Product would have been if such ARM Compliant Product had been sold stand alone to an independent customer at a fair open market value.

8 of 23

		Records
6.5		For the period of six (6) years from the date that each royalty report is delivered to ARM by RDA, LICENSEE shall keep such records and books of account, identifying and providing invoice details for ARM Compliant Products to derive the ASP for each ARM Compliant Product to demonstrate compliance with LICENSEE’s obligations under this Clause 6.
		Audit
6.6		ARM shall have the right for representatives of a firm of independent chartered accountants (“Auditors”), to make an examination and audit, by prior appointment during normal business hours, of all records and accounts as may under recognised accounting practices contain information bearing upon;

	(i)		the number of units of ARM Compliant Products and ARM Technology which have been distributed by LICENSEE under this TLA;
	(ii)		the ASP and fair market value of any ARM Compliant Product which have been distributed by LICENSEE under this TLA;
	(iii)		the amount of Royalties payable to ARM under this TLA; and
	(iv)		any fees payable to ARM under this TLA.
	(v)		any information necessary to substantiate and verify the data submitted to ARM by LICENSE in any Royalty report.

		The Auditors shall be permitted to provide, to ARM, information relating to Clauses 6.6(i)-(v), including but not limited to, information relating to the systems operated by LICENSEE to capture and record such information. Any information obtained pursuant to any audit performed in accordance with the provisions of this Clause 6.6 and provided by the Auditors to ARM shall be treated by ARM as LICENSEE Confidential Information. The Auditors’ conclusions shall (in the absence of clerical or manifest error) be final and binding on the parties. Such audit shall be at ARM’s expense unless; (a) it reveals a net underpayment of Royalties or other fees of five per cent (5%) or more in any Quartet or (b) LICENSEE has failed to provide the Auditors with all requested records and accounts containing information bearing upon the subject matter set out in this Clause 6.6(i)-(v) within ten (10) working days of such request, in which event RDA shall promptly reimburse ARM for the costs of such audit. RDA shall make good any underpayment of royalties forthwith. If the audit identifies that RDA has made an overpayment, such overpayment will be credited to the next payment or payments of Royalties or fees to be made by RDA.
		Taxes
6.7		All sums stated under this TLA do not include taxes. All applicable taxes shall be payable by LICENSEE in accordance with relevant legislation in force at the relevant tax point. Any income or other tax which LICENSEE is required by law to pay or withhold on behalf of ARM with respect to any Royalties or other fees payable to ARM under this TLA may be deducted from the amount of such Royalties or other fees otherwise due, provided, however, that in regard to any such deduction, RDA shall give to ARM such assistance as may be necessary to enable or assist ARM to claim exemption therefrom, or credit therefor, and shall upon request furnish to ARM such certificates and other evidence of deduction and payment thereof as ARM may properly require.
		Payment
6.8		RDA shall pay all Royalties and Fees due to ARM under the terms of this TLA on or before the thirtieth (30th ) day after receipt of ARM’s invoice therefor (“Due Date”). ARM shall send any invoice for payment to the address set out in Section 8 of the relevant Annex 1 and RDA shall provide ARM with at least ten (10) working days notice of any change to such address.

9 of 23

6.9		If any sum under this TLA is not paid by the Due Date (defined in Clause 6.8), then (without prejudice to ARM’s other rights and remedies), in addition to the invoice amount, ARM reserves the right to charge interest on such sum on a day to day from the Due Date to the date of payment at the rate of, the lesser of one percent (1%) per month and the maximum amount permitted by law.
		No Right of Set Off
6.10		All sums properly due to ARM under this TLA shall be paid in full and LICENSEE shall not be entitled to assert against ARM any credit, set-off or counterclaim arising under any Annex 1 in order to justify withholding payment of any sum properly due under any other Annex 1. Obligations under each Annex 1 shall be construed as divisible from obligations under any other Annex 1 for the purposes of interpreting this Clause 6.10.
7.		Support and Maintenance
7.1		Subject to LICENSEE’s payment of the appropriate Fees (defined in Clause 6.1), ARM shall provide to LICENSEE, in respect of the relevant ARM Technology the following support and maintenance for such ARM Technology (“Support and Maintenance”);

	(i)		the use of commercially reasonable efforts to correct any defects in the ARM Technology which cause such technology not to operate in accordance with the functionality described in the relevant datasheet or manual for such technology. If ARM determines that such defects are due to errors in such description ARM shall promptly issue corrections to the datasheet or manual and shall not be required to revise the ARM Technology, provided that LICENSEE’s use of the ARM Technology by LICENSEE is not adversely affected thereby;
	(ii)		all Updates to such ARM Technology; and
	(iii)		subject to the provisions of Clauses 7.2 and 7.3, reasonable telephone, e-mail and written consultation about the operation and application of such ARM Technology.

7.2		The services provided under Clause 7.1(iii) shall expressly exclude any information relating to the design of products incorporating ARM Technology. Consulting services may be provided by ARM under the terms of a separate written agreement. Support supplied by ARM may not be used either; (i) as a substitute for training; or (ii) as additional engineering resource for LICENSEE projects.
7.3		The services provided under Clause 7.1(iii) shall be provided from the relevant ARM support centre, and shall be limited in accordance with the provisions of Section 4 of the relevant Annex 1. Notwithstanding the foregoing, in exceptional cases if ARM has been unable to resolve an issue relating to the ARM technology remotely from the support centre, ARM will use reasonable efforts to provide support to LICENSEE, at LICENSEE’s premises, subject to LICENSEE meeting all reasonable traveling, accommodation and sustenance expenses thereby incurred.
7.4		If ARM delivers a revision of any ARM Technology licensed under any Annex 1, LICENSEE hereby agrees and acknowledges that ARM shall only be obligated to test that each deliverable is compatible with the other deliverables comprising such revision, and ARM shall have no responsibility for testing that any or all of such deliverables are compatible with previously delivered versions of the ARM Technology.
7.5		ARM shall only have an obligation to provide maintenance as described in Clause 7.1(i) and (ii) for the most recently delivered version of the relevant ARM Technology and the version which the most recently delivered version replaced. ARM shall be under no obligation to provide maintenance as described in Clause 7.1(i) and (ii) in respect of any modifications (where permitted) to the ARM Technology created by LICENSEE.

10 of 23

7.6		Upon LICENSEE requesting ARM’s assistance pursuant to the provisions of Clause 7.1(i) or (iii), LICENSEE shall promptly provide to ARM such samples and technical information as ARM may reasonably require and in a form specified by ARM to enable ARM to provide such assistance.
7.7		ARM’s obligation under this Clause 7 is limited expressly to the provision of Support and Maintenance to LICENSEE and ARM shall be under no obligation to provide any support and maintenance to any Designer, Customer, Manufacturer, Test House or other third parties.
7.8		If LICENSEE elects not to renew Support and Maintenance for any ARM Technology and subsequently requests ARM to provide Support and Maintenance in respect of such ARM Technology, in addition to the fees due for the new Support and Maintenance period, LICENSEE hereby agrees that ARM shall be entitled to charge LICENSEE an appropriate fee in respect of the period in which LICENSEE has not received maintenance as described in Clause 7.1(i) and (ii).
8.		Blank
8.1		This section is intentionally blank.
9.		Training
9.1		If provided for in Section 5 of a relevant Annex 1, ARM shall provide training in respect of the relevant ARM Technology in accordance with the provisions of Section 5 of the relevant Annex 1.
10.		ARM Technology Functionality Warranties
10.1		EXCEPT AS EXPRESSLY PROVIDED IN THIS TLA, ARM PROVIDES NO WARRANTIES EXPRESS, IMPLIED OR STATUTORY, INCLUDING, WITHOUT LIMITATION, THE IMPLIED WARRANTIES OF MERCHANTABILITY, SATISFACTORY QUALITY, NON INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE ARM TECHNOLOGY.
10.2		ARM warrants to LICENSEE that the ARM Technology will be consistent with allowing a competent semiconductor manufacturer to manufacture products which substantially conform to the functionality described in the relevant specification delivered by ARM as part of the ARM Technology and identified in Section 1 of the relevant Annex 1. LICENSEE acknowledges that the process for converting the ARM Technology delivered to LICENSEE in to silicon necessarily involves the introduction and use of technology not delivered by ARM and accordingly ARM’s liability and LICENSEE’s sole remedy for breach of the warranty provided under this Clause 10.2 shall be as follows; if LICENSEE can demonstrate to ARM that any defect that is manifested or would be manifested in the silicon of an ARM Compliant Product developed using any ARM Technology is exclusively caused by a defect in the ARM Technology as delivered to LICENSEE then ARM shall use commercially reasonable efforts to either or both; (i) correct any errors in the ARM Technology and deliver the corrected ARM Technology to LICENSEE; or (ii) create a workaround to remedy the defect and deliver such workaround to LICENSEE. THE FOREGOING STATES THE ENTIRE LIABILITY OF ARM WITH RESPECT TO BREACH OF THE WARRANTY PROVIDED IN THIS CLAUSE 10.2.
10.3		WITHOUT PREJUDICE TO THE GENERALITY OF CLAUSE 10.2, ARM SHALL NOT BE RESPONSIBLE FOR ANY RECOVERABLE OR NON-RECOVERABLE COSTS INCURRED, DIRECTLY OR INDIRECTLY, BY LICENSEE IN THE DESIGN MIGRATION, PROCESSING, OR MANUFACTURE OF MASKS AND PROTOTYPES, CHARACTERIZATION OR MANUFACTURE OF PRODUCTION QUALITY SILICON IN WHATEVER QUANTITY.

11 of 23

11.		ARM Technology Intellectual Property Warranties
11.1		ARM warrants, to ARM’s knowledge and belief, that;

	(i)		the ARM Technology does not infringe any third party copyright, mask work right or trade secret; and
	(ii)		as at the relevant Annex Effective Date, there are no pending; (a) Claims, or (b) actions commenced against ARM for infringement by the relevant ARM Technology of any third party Intellectual Property.

11.2		LICENSEE’s exclusive remedy for any breach of the warranties provided in Clause 11.1 shall be the indemnification provided under Clause 12.1 of this XXX.
00.		Intellectual Property Indemnities
12.1		Except as provided under Clause 12.2, in the event of a suit against LICENSEE based upon a claim that the Trade Marks or any of the ARM Technology delivered by ARM to LICENSEE under this TLA, when used in accordance with the provisions of this TLA, infringes any third party Intellectual Property, ARM agrees, subject to the limitations of Clauses 13.1 and 13.2, to defend and indemnify LICENSEE, at ARM’s expense, and to pay costs and damages finally awarded in any such suit or agreed in any settlement, provided that; (i) ARM is promptly notified by LICENSEE, in writing, of any threats, claims and proceedings related thereto; (ii) ARM has sole control of the defence and any settlement thereof; (iii) LICENSEE does not make any admission of liability nor settle or otherwise compromise any such claim without ARM’s prior written consent; (iv) LICENSEE furnishes to ARM, upon request, any information available to LICENSEE relating to the defense of such claim; (v) LICENSEE provides reasonable assistance to ARM in the defense of such claim; and (vi) LICENSEE ceases use of the ARM Technology which is the subject of the infringement claim upon receipt from ARM of any non-infringing replacement for such ARM Technology. THE FOREGOING STATES THE ENTIRE LIABILITY OF ARM WITH RESPECT TO INFRINGEMENT BY THE TRADE MARKS OR THE ARM TECHNOLOGY OF ANY THIRD PARTY INTELLECTUAL PROPERTY.
12.2		ARM shall have no liability under Clause 12.1 in respect of; (i) any infringement arising from; (a) the combination of the ARM Technology with other products not supplied by ARM if such infringement would not have occurred but for such combination; (b) any modification of the ARM Technology by or for LICENSEE if such infringement would not have occurred but for such modification; (c) the process of synthesizing any ARM Technology including but not limited to the use by LICENSEE of LICENSEE’s or LICENSEE’s agent’s cell libraries if such infringement would not have occurred but for the application of such process; or (d) any manufacturing process applied to the ARM Technology by LICENSEE if such infringement would not have occurred but for the application of such process; or (ii) any suit brought by a third party against LICENSEE based upon a claim that any of the ARM Technology delivered by ARM to LICENSEE under this TLA infringes a patent owned by such third party where such claim has been made by such third party in response to an initial claim by LICENSEE that such third party infringes any patent owned or controlled by LICENSEE.
12.3		If either a third party alleges, or ARM has any concerns, that any ARM Technology infringes or may infringe the Intellectual Property of a third party, then without any admission of liability, ARM at its option and expense may develop an Update to the relevant ARM Technology which in ARM’s opinion avoids such alleged infringement and upon receipt of such Update from ARM, LICENSEE shall: (i) in respect of any new design or derivatives of any existing designs which have not been taped out, immediately cease use of the ARM Technology which the Update replaces; and (ii) in respect of any existing designs which have been taped out, within nine (9) months of receipt of the Update, cease use of the ARM Technology which the Update replaces.

12 of 23

12.4		If a suit against ARM is based in whole or in part upon a claim that any of the ARM Technology delivered by ARM to LICENSEE under this TLA, when used in accordance with this TLA, infringes any third party Intellectual Property because of; (i) the combination of the ARM Technology with other products not supplied by ARM if such infringement would not have occurred but for such combination; (ii) the modification by LICENSEE of the ARM Technology if such infringement would not have occurred but for such modification; (iii) the process of synthesizing any ARM Technology including but not limited to the use by LICENSEE of LICENSEE’s or LICENSEE’s agent’s cell libraries if such infringement would not have occurred but for the application of such process; or (iv) any manufacturing process applied to the ARM Technology by LICENSEE if such infringement would not have occurred but for the application of such process, then LICENSEE agrees to indemnify ARM for any legal costs (including attorney’s fees) reasonably incurred by ARM in defending such suit provided that LICENSEE is notified promptly in writing of the suit and that at LICENSEE’s request, LICENSEE is given control of and all requested reasonable assistance to defend such suit to the extent that such suit relates to any of (i) to (iv) above.
12.5		ARM shall only be liable under Clause 12.1 for any damages awarded by a court, for infringement by the Trade Marks or any ARM Technology of the Intellectual Property of a third party, up to the date upon which such court issues its judgment. ARM shall have no continuing liability under Clause 12.1 for any loss suffered by LICENSEE in respect of the same infringement after the date of such judgment.
13.		Limitation of Liability
13.1		EXCEPT IN RESPECT OF ANY BREACH OF THE PROVISIONS OF CLAUSE 3 (CONFIDENTIALITY), IN NO EVENT SHALL EITHER PARTY BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES WHETHER SUCH DAMAGES ARE ALLEGED AS A RESULT OF TORTIOUS CONDUCT (INCLUDING NEGLIGENCE) OR BREACH OF CONTRACT OR OTHERWISE EVEN IF THE OTHER PARTY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
13.2		NOTWITHSTANDING ANYTHING TO THE CONTRARY CONTAINED IN THIS TLA, THE MAXIMUM LIABILITY OF ARM TO LICENSEE IN AGGREGATE FOR ALL CLAIMS MADE AGAINST ARM IN CONTRACT TORT OR OTHERWISE UNDER OR IN CONNECTION WITH THE SUBJECT MATTER OF EACH ANNEX 1 SHALL NOT EXCEED FIFTY PERCENT (50%) OF THE FEES (DEFINED IN CLAUSE 6.1) PAID BY LICENSEE TO ARM UNDER SUCH ANNEX 1. THE EXISTENCE OF MORE THAN ONE CLAIM OR SUIT WILL NOT ENLARGE OR EXTEND THE LIMIT. LICENSEE RELEASES ARM FROM ALL OBLIGATIONS, LIABILITY, CLAIMS OR DEMANDS IN EXCESS OF THIS LIMITATION.
13.3		NOTHING IN THIS CLAUSE SHALL OPERATE TO EXCLUDE LIABILITY FOR DEATH OR PERSONAL INJURY RESULTING FROM EITHER PARTY’S NEGLIGENCE.
13.4		The parties hereby acknowledge that the provisions of this Clause 13 allocate the risks under this TLA between ARM and LICENSEE after negotiation and ARM’s pricing reflects this allocation of risk and the limitation of liability specified herein.

13 of 23

14.		Term, Termination and Expiration
		TLA Term
14.1		Except as provided below, this TLA shall commence on the Effective Date and shall continue in force unless earlier terminated in accordance with the provisions of Clause 14.2.
		Termination by Either Party
14.2		Without prejudice to any other right or remedy which may be available to it, either party shall be entitled immediately to terminate this TLA (including all Annexes incorporated hereunder) by giving written notice to the other, if the other party:

	(i)		has committed a material breach of any of its obligations hereunder which is not capable of remedy; or
	(ii)		has committed a material breach of any of its obligations hereunder which is capable of remedy but which has not been remedied within a period of sixty (60) days following receipt of written notice to do so; or
	(iii)		any circumstances arise which would entitle the court or a creditor to appoint a receiver, administrative receiver or administrator or to present a winding-up petition or make a winding-up order; or
	(iv)		makes any voluntary arrangement with its creditors for the general settlement of its debts or becomes subject to an administration order; or
	(v)		has an order made against it, or passes a resolution, for its winding-up (except for the purposes of amalgamation or reconstruction) or has a receiver or similar officer appointed over all or substantially all of its property or assets.

		Annex Expiry
14.3		Each Annex shall commence on the Annex Effective Date (defined in each Annex 1) and shall continue in force for the Term set out therein unless earlier terminated in accordance with the provisions of Clause 14.2.
15.		Effect of Expiry and Termination
		Termination by ARM
15.1		Upon termination of this TLA by ARM in accordance with Clause 14.2, LICENSEE will immediately discontinue any use and distribution of all ARM Technology, ARM Confidential Information and any products embodying such technology or information. LICENSEE shall, at ARM’s option, either destroy or return to ARM any ARM Confidential Information, including any copies thereof in its possession and any ARM Technology or derivatives (including any translation, modification, compilation, abridgement or other form in which the ARM Technology has been recast, transformed or adapted) thereof in its possession. Within one month after termination of this TLA LICENSEE will furnish to ARM a certificate signed by a duly authorised representative of LICENSEE that to the best of his or her knowledge, information and belief, after due enquiry, LICENSEE has complied with provisions of this Clause.
		Upon termination of this TLA by ARM in accordance with either of Clauses 14.2; (i) the termination date shall be treated as the end of a Quarter for the purpose of accounting for Royalties to ARM; and (ii) any fees outstanding, whether or not such fees have become due at the date of termination) shall become due and payable to ARM in accordance with the provisions of Clause 6.
		Termination by LICENSEE
15.2		Upon termination of this TLA by LICENSEE in accordance with Clause 14.2 the licenses granted under Clause 2 of this TLA shall survive such termination, subject to the terms and conditions of

14 of 23

		this TLA including but not limited to LICENSEE’s continued payment, to ARM, its liquidator or receiver of any fees and Royalties due at the date of termination or in the future in accordance with the provisions of Clause 6. Annex 1 Expiry
15.3		Upon expiry of any Annex 1 in accordance with the provisions of Clause 14.3,

	(i)		any licences granted under Section 2 of the relevant Annex 1, to use copy and modify the relevant ARM Technology to develop products shall cease;
	(ii)		any licences granted under Section 2 of the relevant Annex 1, to manufacture, have manufactured and sell supply or otherwise distribute products developed using the relevant ARM Technology shall survive subject to the terms and conditions of this TLA and subject to the continued payment to ARM of any fees and Royalties due at the time of expiry and in the future under the terms of this TLA and provided that such products are already being distributed at the date of expiry of the Annex 1; and
	(iii)		except as expressly provided to the contrary in this Clause 15.3(iii), LICENSEE shall at ARM’s option, either destroy or return to ARM any ARM Confidential Information, including any copies thereof in its possession and any ARM Technology or derivatives (including any translation, modification, compilation, abridgement or other form in which the ARM Technology has been recast, transformed or adapted) thereof in its possession but LICENSEE may keep one copy of the relevant ARM Technology for the purpose of supporting the products referred to in Clause 15.3(ii).

15.4		Upon termination the provisions of Clauses 1, 3, 6 (to the extent that any obligation under this Clause remains outstanding), 11, 13, 15 and 16 shall survive termination.
16.		General
16.1		All communications between the parties including, but not limited to, notices, royalty reports, error or bug reports, the exercise of options, and support requests shall be in the English language.
16.2		All notices which are required to be given hereunder shall be in writing and shall be sent to the address of the recipient set out below (either party may change their respective address for service by giving notice of the change to the other party). Any such notice may be delivered personally, by commercial overnight courier or facsimile transmission which shall be followed by a hard copy and shall be deemed to have been served if by hand when delivered, if by commercial overnight courier 48 hours after deposit with such courier, and if by facsimile transmission when dispatched.

ARM Contact		LICENSEE Contact
General Counsel
000 Xxxxxxxx Xxxx
Xxxxxxxxx XX0 0XX
Xxxxxxx

16.3 Neither party shall assign or otherwise transfer this TLA or any of its rights and obligations hereunder whether in whole or in part without the prior written consent of the other. An assignment shall be deemed to include, without limitation; (i) any transaction or series of transactions whereby a third party acquires, directly or indirectly, the power to control the management and policies of the party, whether through the acquisition of voting securities, by contract or otherwise; or (ii) the sale of more than fifty percent (50%) of the party’s assets whether in a single transaction or series of transactions.

15 of 23

16.4		Neither party shall be liable for any failure or delay in its performance under this TLA due to causes, including, but not limited to, acts of God, acts of civil or military authority, fires, epidemics, floods, earthquakes, riots, wars, sabotage, third party industrial disputes and governments actions, which are beyond its reasonable control; provided that the delayed party: (i) gives the other party written notice of such cause promptly, and in any event within fourteen (14) days of discovery thereof; and (ii) uses its reasonable efforts to correct such failure or delay in its performance. The delayed party’s time for performance or cure under this Clause 16.4 shall be extended for a period equal to the duration of the cause.
16.5		ARM and LICENSEE are independent parties. Neither company nor their employees, consultants, contractors or agents are agents, employees or joint venturers of the other party, nor do they have the authority to bind the other party by contract or otherwise to any obligation. Neither party will represent to the contrary, either expressly, implicitly, by appearance or otherwise.
16.6		Failure or delay by either party to enforce any provision of this TLA shall not be deemed a waiver of future enforcement of that or any other provision.
16.7		The provisions contained in each clause and sub-clause of this TLA shall be enforceable independently of each of the others and if a provision of this TLA is, or becomes, illegal, invalid or deemed unenforceable by any court or administrative body of competent jurisdiction it shall not affect the legality, validity or enforceability of any other provisions of this TLA. If any of these provisions is so held to be illegal, invalid or unenforceable but would be legal, valid or enforceable if some part of the provision were deleted, the provision in question will apply with such modification as may be necessary to make it legal, valid or enforceable.
16.8		This TLA, including all Annexes, constitutes the entire agreement between the parties with respect to the subject matter hereof, and supersedes and replaces all prior or contemporaneous understandings or agreements, written or oral, regarding the subject matter. Except in respect of changes to the Trademark Guidelines which may be changed in accordance with the provisions of Clause 2.10, no amendment to or modification of this TLA shall be binding unless in writing and signed by a duly Authorized representative of both parties.
16.9		The ARM Technology provided under this TLA is subject to U.S. export control laws, including the U.S. Export Administration Act and its associated regulations, and may be subject to export or import regulations in other countries. LICENSEE agrees to comply fully with all laws and regulations of the United States and other countries (“Export Laws”) to assure that neither the ARM Technology, nor any direct products thereof are; (i) exported, directly or indirectly, in violation of Export Laws, either to any countries that are subject to U.S. export restrictions or to any end user who has been prohibited from participating in the U.S. export transactions by any federal agency of the U.S. government; or (ii) intended to be used for any purpose prohibited by Export Laws, including, without limitation, nuclear, chemical, or biological weapons proliferation.
16.10		The ARM Technology provided under this TLA consists solely of commercial items. LICENSEE shall be responsible for ensuring that any ARM Technology provided to the US Government in accordance with the terms of this TLA is provided with the rights and restrictions described elsewhere herein.
16.11		Except as expressly stated in this TLA, the Contracts (Rights of Third Parties) Xxx 0000 and any legislation amending or replacing that Act shall not apply in relation to this TLA or any agreement, arrangement, understanding, liability or obligation arising under or in connection with this TLA and nothing in this TLA shall confer on any third party the right to enforce any provision of this TLA.
16.12		The validity, construction and performance of this TLA shall be governed by English Law.

16 of 23

     IN WITNESS WHEREOF the parties have caused this TLA to be executed by their duly authorised representatives:

ARM LIMITED:						RDA INTERNATIONAL INC.
SIGNED		/s/ Xxxxxx Xxxx				SIGNED		/s/ Xxxxxxx Xxx
NAME:		Xxxxxx Xxxx				NAME:		Xxxxxxx Xxx
TITLE:		EVP and General Manager Processors Division				TITLE:		CEO
DATE:		12/5/08				DATE:		2/27/2008

/seal/
APPROVED BY ARM LEGAL
Initial: AF
Date: 8/5/8

17 of 23

Annex 1

18 of 23

Annex 2

Rules for Trademark Usage

1.		On Die Encapsulation
1.1		Except as set out in Clause 1.2, if Licensee is distributing ARM Compliant Products Licensee shall apply the Trademark identified in Section 6 Part A of each Annex 1 to the die encapsulation (i.e. die package) of each unit of ARM Compliant Product.
1.2		Licensee shall not be obliged to apply the Trademark identified in Section 6 Part A of each Annex 1 to the die encapsulation of each unit of ARM Compliant Product if;

	1.2.1		Licensee provides written evidence to ARM that Licensee’s customer has requested that the die encapsulation of each unit of ARM Compliant Product is to bear no trade marks whatsoever; or
	1.2.2		Licensee provides written evidence to ARM that Licensee’s customer has requested that the die encapsulation of each unit of ARM Compliant Product is to bear only the trademark of such customer; or
	1.2.3		the size of the die encapsulation physically prohibits the application of both Licensee’s trademark and the Trademark identified in Section 6 Part A of each Annex 1 when such marks are scaled to occupy the same area.

1.3		Where Licensee distributes ARM Compliant Products to an Intermediary, the packaging of each unit of such ARM Compliant Product so distributed must bear a xxxx which unambiguously identifies Licensee as the manufacturing source of the ARM Product. If the packaging of the ARM Compliant Product cannot accommodate Licensee’s xxxx because of size limitations, then Licensee shall include a prominent statement indicating that Licensee is the manufacturing source of the ARM Compliant Product (e.g. “Manufactured by [Licensee identity] under licence from ARM Limited”) in substantially all advertising material and promotional, technical or other documentation, including press releases, associated with the ARM Compliant Product and Licensee shall oblige any Intermediary to do the same.
		Where; “Intermediary” means any third party to whom Licensee distributes an ARM product and who is not an End User and “End User” means any person or other legal entity which licenses an ARM Compliant Product for its own personal use or for use in the ordinary course of its business but not for onward sale, distribution or sublicensing.
1.4		Except as agreed in writing by ARM, any application by Licensee of the Trademark identified in Section 6 Part A of each Annex 1 shall be in accordance with the Logo Design Guide set out in Exhibit A of this Schedule.
2.		On Product Packaging, Documentation, Copy, and Websites
2.1		ARM Powered Logo (Exhibit B)

	(a)		Licensee may apply the Trademark identified in Section 6 Part B of each Annex 1 in a prominent place, to any product packaging for End User products containing an ARM Compliant Product distributed under licence from ARM.
	(b)		Licensee may apply the Trademark identified in Section 6 Part B of each Annex 1 to any advertising or promotional material for, or relating to, any End User product containing an ARM Compliant Product distributed under licence from ARM.

19 of 23

(c) Licensee may apply the Trademark identified in Section 6 Part B of each Annex 1 to the page(s) of Licensee’s web site relating to any End User product containing an ARM Compliant Product distributed under license from ARM.

2.2 ARM Corporate Signature (Exhibit C)

	(a)		Licensee shall apply the Trademark identified in Section 6 Part C of each Annex 1 in a prominent place, to any technical documentation for, or relating to, any ARM Compliant Product distributed under licence from ARM.
	(b)		Licensee may apply the Trademark identified in Section 6 Part C of each Annex 1 to any advertising or promotional material for, or relating to, any ARM technology or to the company, ARM Limited.
	(c)		Licensee shall apply the Trademark identified in Section 6 Part C of each Annex 1 to the page(s) of Licensee’s web site relating to any ARM Compliant Product distributed under license from ARM.
	(d)		The Trademark identified in Section 6 Part C of each Annex 1 may only be used as a logo to identify ARM (including ARM Holdings plc, its operating company ARM Limited, and the regional subsidiaries).

2.3 ARM Connect Community Partner Logo (Exhibit D)

	(a)		Licensee may apply the Trademark identified in Section 6 Part D of each Annex 1 to any advertising or promotional material for, or relating to, Licensee’s business relationship with ARM.
	(b)		Licensee may apply the Trademark identified in Section 6 Part D of each Annex 1 in a prominent place, to any technical documentation for, or relating to, any ARM Compliant Product distributed under licence from ARM.

2.4		Licensee may use either of the Trade Marks identified in Section 6 Part C or Part D of each Annex 1 to create a hyperlink between the primary page of Licensee’s website and the primary page of ARM’s website.
2.5		Any use or application by Licensee of the Trade Marks identified in Section 6 Part B, Part C or Part D of each Annex 1 shall be in accordance with; (i) the Logo Design Guide set out in Exhibit B, Exhibit C, or Exhibit D as relevant of this Schedule; and (ii) with guidelines set forth in Clause 3 of this Schedule and other accepted trademark use standards.
2.6		The Trade Marks identified in Section 6 Part B, Part C and Part D of each Annex 1 may only be used as logos and may not be incorporated into a body of text.
2.7		Other Trade Marks

	(a)		Licensee shall apply the appropriate Trademark from those identified in Section 6 Part E of each Annex 1 to any advertising material or promotional, technical or other documentation relating to any ARM Compliant Product containing such ARM technology distributed by Licensee under licence from ARM.
	(b)		Licensee may apply the appropriate Trademark from those identified in Section 6 Part E of each Annex 1 to any product packaging of any product containing such ARM technology and distributed by Licensee under licence from ARM.
	(c)		Licensee shall apply the Trade Marks identified in Section 6 Part E of each Annex 1 to the page(s) of Licensee’s website relating to any ARM Compliant Product distributed under licence from ARM.

20 of 23

(d) Any use of the Trade Marks identified in Section 6 Part E of each Annex 1 by Licensee shall be in accordance with the guidelines set forth in Clause 3 of this Schedule and other accepted trademark use standards.

3.		Use Guidelines
3.1		Where any registered Trademark is applied to any product packaging, advertising material or promotional, technical or other documentation relating to any product distributed under license from ARM, then for each prominent use and the first use in any text of any such xxxx the xxxx must appear with the symbol “®” at the upper right corner of the xxxx.
3.2		Where any unregistered Trademark is applied to any product packaging, advertising material and promotional, technical or other documentation relating to any product distributed under licence from ARM, then for each prominent use and the first use in any text of any such xxxx the xxxx must appear with the symbol “™” at the upper right corner of the xxxx.
3.3		Licensee shall not adopt, use, or attempt to register any trademark which is confusingly similar to any ARM trademark.
3.4		Licensee shall use trade marks only in the form in which they have been registered or are being claimed. To maintain the integrity of a trademark, Licensee shall never use it in a possessive, plural, hyphenated, or abbreviated form; never alter it by adding letters or numbers or incorporating it into another word; always use the proper spelling, punctuation, capitalization, and font type.
3.5		Licensee shall never alter a Trademark

Correct: Use an ARM^® PrimeCell^® peripheral.

Incorrect: Add a PrimeCell^® peripheral to your ARMory.

3.6 Licensee shall use proper capitalization for a Trademark

Correct: ARM^®

Incorrect: Arm^®

3.7 Licensee shall always use the appropriate descriptive generic noun written in lowercase letters after a Trademark

Correct: ARM^® core

Incorrect: ARM^® Core

3.8 Licensee shall use a Registered Trademark Symbol (^®) when Using “ARM” as a Trademark or Brand Name, but Not as a Trade Name

Correct: ARM announces its new line of ARM^® developer tools

Incorrect: ARM^® Corporation.

3.9 Licensee shall include appropriate notices in substantially the following form on any product packaging, advertising material and promotional, technical or other documentation relating to any product distributed under licence from ARM if such material contains an ARM Trademark;

For registered Trade Marks: “[Cite Trademark(s)] is [are] the registered trademark(s) of ARM Limited in the EU and other countries.

For unregistered Trade Marks: “[Cite Trademark(s)] is [are] the trademark(s) of ARM Limited in the EU and other countries.

3.10 Licensee shall always use the appropriate symbols with a trademark in a heading, as well as on the first occurrence of the trademark in a text. The same standards apply to attributing trade

21 of 23

		marks on a Web page. Since each Web page has the potential to be viewed individually, trademark symbols should be used on each page, even if part of a multipage section or site. Licensee shall attribute trade marks on the first occurrence within sidebars, charts, tables, graphics, diagrams, marketing slides, banners, “Related information” links, and other links on a Web page, because these elements have greater potential to be read or placed independently.
3.11		In addition to the rules set out above ARM may provide Licensees with additional instructions relating to the use of the Trade Marks from time to time which Licensee shall follow in its future use of the Trade Marks.

22 of 23

Logo Design Guide

Exhibit A

[LOGO]

Exhibit B

[LOGO]

Exhibit C

[LOGO]

Exhibit D

[LOGO]

The marks must appear exactly as shown in this Logo Design Guide; the elements, proportions and relationships must not change. The marks are available in stat repro form and in .eps for Macintosh or .WMF for PC platforms. These formats ensure the highest possible reproduction quality. However, should you need another format for a specific project, please contact your local ARM office for advice.

When produced in colour, the xxxx should be printed in Pantone 314 blue. Process colour reproduction may not match Pantone-identified solid colour standards. When specifying the colour of the xxxx with process inks, the correct mix is:

Cyan			100
Magenta			0
Yellow			8.5
Black			34

•		Do not alter or deform the shape of the marks.
•		Do not replace the logotype with a different typeface or attempt to mimic the logotype typeface.
•		Do not place competing visual elements (including but not limited to other Trade Marks) close to the marks.
•		Do not set type near to the marks that could be construed as a corporate slogan or motto.

23 of 23