CONFIDENTIAL
Exhibit 10.17
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS BOTH (I) NOT MATERIAL AND (II) IS THE TYPE THAT THE REGISTRANT TREATS AS PRIVATE OR CONFIDENTIAL.
Master Services Agreement for
Drug Product Development and Manufacturing
(the “Agreement”)
by and between
Lonza Ltd
Xxxxxxxxxxxxxxxxxxxxx 00
XX-0000 Xxxxx
Xxxxxxxxxxx
- hereinafter “Lonza” -
and
Vaxcyte, Inc.
000 Xxxxxxxxxx Xxxx
Xxxxx 000
San Carlos, CA 94070
United States of America
- hereinafter “Customer” -
Effective as of March 22, 2022 (the “Effective Date”)
1
178751579 v5
CONFIDENTIAL
Table of Contents
Page
1 Definitions and Interpretation 1
2 Performance of Services 6
3 Project Management / Steering Committee 8
4 Quality 8
5 Insurance 9
6 Forecasting, Ordering and Cancellation 9
7 Delivery and Acceptance 11
8 Price and Payment 12
9 Capital Equipment 13
10 Intellectual Property 13
11 Warranties 15
12 Indemnification and Liability 16
13 Confidentiality 17
14 Term and Termination 19
15 Force Majeure 20
16 Miscellaneous 20
Appendix A
Recitals
WHEREAS, Customer is engaged in the development and research of certain products and requires assistance in the development and manufacture of product;
WHEREAS, Lonza and its Affiliates have expertise in the evaluation, development and manufacture of products;
WHEREAS, the Parties have entered into a development and manufacturing services agreement, dated 29 October 2018, for manufacturing services related to the drug product VAX-24, under which Customer was originally named SutroVax, Inc. (the “Original Agreement”);
WHEREAS, Customer wishes to engage Lonza for Services relating to the development and manufacture of the Product as described in this Agreement; and
2
CONFIDENTIAL
WHEREAS, Lonza, or its Affiliate, is prepared to perform such Services for Customer on the terms and subject to the conditions set out herein
NOW, THEREFORE, in consideration of the mutual promises contained herein, and for other good and valuable consideration, the Parties intending to be legally bound, agree as follows:
1Definitions and Interpretation
“Affiliate” means any company, partnership or other entity which directly or indirectly Controls, is Controlled by or is under common Control with the relevant Party. “Control” means the ownership of more than fifty percent (50%) of the issued share capital or the legal power to direct or cause the direction of the general management and policies of the relevant Party.
“Agreement” means this agreement incorporating all Appendices, as amended from time to time by written agreement of the Parties.
“Applicable Laws” means all relevant U.S. and European Union federal, state and local laws, statutes, rules, and regulations which are applicable to a Party’s activities hereunder, including, without limitation, the applicable regulations and guidelines of any Governmental Authority and all applicable cGMP together with amendments thereto.
“Approval” means the first marketing approval by the FDA or EMA of Product from the Facility for commercial supply.
“Background Intellectual Property” means any Intellectual Property either (i) owned, licensed or controlled by a Party prior to the Effective Date or (ii) developed or acquired by a Party independently from the performance of the Services hereunder during the Term of this Agreement.
“Batch” means the Product derived from a single run of the Manufacturing Process at a scale to be mutually agreed by the Parties.
“Batch Price” means the Price of each Batch.
“Campaign” means a series of no less than [***] cGMP Batches manufactured consecutively.
“Cancellation Fee” has the meaning given in Clause 6.4.
“Capital Equipment“ means those certain pieces of equipment described in the Project Plan: (i) that are specific to the production of the Product and (ii) that are purchased by Customer or for which Customer
3
CONFIDENTIAL
reimburses Lonza, including, without limitation, the related documentation regarding the design, validation, operation, calibration and maintenance of such equipment.
“Certificate of Analysis” means a document prepared by Lonza listing tests performed by Lonza or approved External Laboratories, the Specifications and test results.
“cGMP” means those laws and regulations applicable in the U.S. and Europe, relating to the manufacture of medicinal products for human use, including, without limitation, current good manufacturing practices as specified in the ICH guidelines, including without limitation, ICH Q7A “ICH Good Manufacturing Practice Guide for Active Pharmaceutical Ingredients”, US Federal Food Drug and Cosmetic Act at 21CFR (Chapters 210, 211, 600, 610, and 820) and the Guide to Good Manufacturing Practices for Medicinal Products as promulgated under European Directive 91/356/EEC. For the avoidance of doubt, Lonza’s operational quality standards are defined in internal cGMP policy documents.
“cGMP Batches” means any Batches which are required under the Project Plan to be manufactured in accordance with cGMP.
“Change” means any change to the Services or pricing incorporated into a written amendment to the Agreement in accordance with clause 17.2 or effected in accordance with the Quality Agreement.
“Commencement Date” means the date of commencement of manufacturing activities for a Batch hereunder.
“Confidential Information” means Customer Information and/or Lonza Information, as the context requires.
“Corruption Laws” means all applicable anti-bribery and anti-corruption laws and regulations, including but not limited to the U.S. Foreign Corrupt Practices Act, the U.K. Xxxxxxx Xxx 0000, and the Organization for Economic Co-operation and Development (OECD) Convention on Combating Bribery and Foreign Public Officials in International Business Transactions.
“Customer Information” means all technical and other information which at the time of disclosure by Customer was not known to Lonza or in the public domain relating to the Manufacturing Process and the Product, from time to time supplied by the Customer to
4
CONFIDENTIAL
Lonza, including any materials supplied by Customer to Lonza in accordance with the Project Plan.
“Customer Materials” means any Raw Materials or other materials of any nature (e.g., antibodies used in product-specific assays), proprietary to Customer, provided by Customer to Lonza under or in connection with this Agreement, and previously not possessed by or not available to Lonza. For the avoidance of doubt, Drug Substance shall be considered Customer Material.
“Drug Product” means the formulation of the Drug Substance(s) filled into its final containers (e.g., vials).
“Drug Substance” means any proprietary molecule(s) identified in the Project Plan that are to be included in the Drug Product. For clarity, the term Drug Substance may be used interchangeably with Active Pharmaceutical Ingredient (API).
“EMA” means the European Medicines Agency or any successor agency thereto.
“External Laboratories” means any Third Party analytical service provider contracted directly by Customer.
“Facility” means Lonza’s manufacturing facilities in Visp and/or Basel Switzerland, or such other facility, including [***], as may be agreed upon by the Parties.
“FDA” means the United States Food and Drug Administration, or any successor agency thereto.
“GDPR” means any applicable data protection or privacy laws, rules and regulations, including but not limited to, the European Union e-Privacy Directive 2002/58/EC, the European Union General Data Protection Regulation 2016/679, the UK Data Protection Xxx 0000, and any other laws equivalent thereto.
“Governmental Authority” means any Regulatory Authority and any national, multi-national, regional, state or local regulatory agency, department, bureau, or other governmental entity in the U.S., Switzerland or the European Union.
“Intellectual Property” means (i) inventions (whether or not patentable), patents, trade secrets, copyrights, trademarks, trade names and domain names, rights in designs, rights in computer software, database rights, rights in confidential information (including
5
CONFIDENTIAL
know-how) and any other intellectual property rights, in each case whether registered or unregistered, (ii) all applications (or rights to apply) for, and renewals or extensions of, any of the rights described in the foregoing clause (i) and (iii) and all rights and applications that are similar or equivalent to the rights and application described in the foregoing clauses (i) and (ii), which exist now, or which come to exist in the future, in any part of the world.
“International Trade Restrictions” means any export control requirements and trade, financial and economic sanctions which apply to this Agreement and the Services under the laws, regulations and rules of the United Nations, the European Union, the United Kingdom, Switzerland and any other relevant jurisdiction; and all necessary export and re-export written consents, permits, and authorizations required by International Trade Restrictions.
“Lonza Information” means all information that is proprietary to Lonza or any Affiliate of Lonza and that is maintained in confidence by Lonza or any Affiliate of Lonza and that is disclosed by Lonza or any Affiliate of Lonza to Customer under or in connection with this Agreement, including without limitation, any and all Lonza know-how and trade secrets.
“Manufacturing Instructions” means the document compiled by Lonza and approved by Customer, which defines the manufacturing methods, test methods and other procedures, directions and controls associated with the manufacture and testing of Product.
“Manufacturing Process” means the production process for the manufacture of Product to be developed by Lonza and approved by Customer, as described in the Project Plan.
“New Customer Intellectual Property” has the meaning given in Clause 10.2.
“New General Application Intellectual
Property” has the meaning given in Clause 10.3.
“Non-Clinical Batches” means a Batch manufactured under the Project Plan that is not intended as a cGMP Batch, which shall include “Technical Batches”, “Toxicology Batches”, “Proof-of-Concept Batches” and any other non-cGMP Batches in the Project Plan.
“Party” means each of Lonza and Customer and, together, the “Parties”.
6
CONFIDENTIAL
“Price” means the price for the Services and Products as set out in Appendix A.
“Product” means the Drug Product manufactured using the Manufacturing Process by Lonza for Customer as specified in the Project Plans. .
“Project Plan” or “Project Plans” means the plans describing the Services to be performed by Lonza under this Agreement, including any update and amendment of the Project Plan to which the Parties may agree from time to time. The initial Project Plans are attached hereto as Appendix A.
“Quality Agreement” means the quality agreement entered into between the parties on May 21 and 22, 2021 by Lonza and Customer respectively.
“Raw Materials” means all ingredients, excipients as well as materials needed to perform the Services, including solvents, consumables/disposables, kits, capillaries, columns, antibody reagents, and other ‘non-standard’ reagents, filters, chromatography resins, cross flow membranes, bags, HPLC columns, specific reagents, infusion sets, pumps, and other components of the Product required to perform the Manufacturing Process or Services (including primary and secondary packaging materials, labels, filters, bags, tubings, dose administration kits and pumps, specific reagents, bioassay etc.). For the avoidance of doubt, Drug Substances are not considered to be Raw Materials.
"Raw Material Fee" means the procurement and handling fee of [***] ([***]%) of the acquisition cost of Raw Materials by Lonza that is charged to the Customer in addition to the cost of such Raw Materials. For clarity, the [***]% Raw Material Fee shall not apply to any Customer Materials or materials produced by Lonza (or any of its Affiliates), under or pursuant to any other written agreement between Lonza and Customer (such as Drug Substances).
“Regulatory Authority” means the FDA, EMA and any other similar regulatory authorities as may be agreed upon in writing by the Parties.
“Release” has the meaning given in Clause 7.1.
“Services” means all or any part of the services to be performed by Lonza under this Agreement (including, without limitation, process and analytical method transfer, process
7
CONFIDENTIAL
development, process optimization, validation, non-clinical and clinical manufacturing, as well as quality control and quality assurance activities), particulars of which are set out in a Project Plan.
“Services Data” means data generated by Lonza or any Affiliate or Subcontractor in the course of Lonza’s or such entities’ performing Services hereunder.
“Specifications” means the analytical tests and acceptance criteria of the Product as agreed between Customer and Lonza during the execution of the Services.
“Subcontractor” means a Third Party contracted directly by Lonza for the purpose of providing services to the Customer as agreed between Customer and Lonza.
“Technical Batch” means a Batch that is intended to demonstrate the transfer of the Manufacturing Process to the Facility.
“Term” has the meaning given in Clause 14.1.
“Third Party” means any party other than Customer, Lonza and their respective Affiliates.
In this Agreement references to the Parties are to the Parties to this Agreement, headings are used for convenience only and do not affect its interpretation, references to a statutory provision include references to the statutory provision as modified or re-enacted or both from time to time and to any subordinate legislation made under the statutory provision, references to the singular include the plural and vice versa, and references to the word “including” are to be construed without limitation.
2.1Performance of Services. Subject to Clause 2.3, Lonza shall itself and through its Affiliates, diligently carry out the Services as provided in the Project Plan and use commercially reasonable efforts to perform the Services without any material defect and according to the estimated timelines as set forth in the Project Plan. Lonza shall retain appropriately qualified and trained personnel with the requisite knowledge and experience to perform the Services in accordance with this Agreement. With Customer’s prior written consent, Lonza may subcontract or delegate any of its rights or obligations under this Agreement to perform the Services, provided, that Lonza shall remain primarily responsible for the actions of any such Subcontractor and/or delegate. Specifically, and without limiting the foregoing, any and all such Subcontractors shall be subject to the same obligations of confidentiality at least as stringent, and as protective of Customer, as those obligations of confidence and non-use imposed upon Lonza and provided that such External Laboratories shall be subject to obligations to act diligently. Lonza shall not be responsible for analytical services performed by External Laboratories.
8
CONFIDENTIAL
2.2Technology Transfer. The Parties expressly agree that they shall work together to transfer the Manufacturing Process to the Facility, including implementing the technology transfer plan set forth in the Project Plan. Customer shall fully support such technology transfer as reasonably requested by Lonza.
2.3Non-Clinical Batches. Lonza shall manufacture the Non-Clinical Batches (including the Technical Batches) in accordance with the Project Plan. Customer shall have the right to make whatever further use of the Non-Clinical Batches as it shall determine, provided that Customer pays for such Batches, such use is not for human use, and does not violate any Applicable Laws. Lonza makes no warranty that the Non-Clinical Batches (including the Technical Batches) will meet the Specifications, but will manufacture all such Batches in accordance with and for the intended purpose set forth in the Project Plan.
2.4cGMP Batches. Lonza will, in accordance with the terms of this Agreement and Quality Agreement, manufacture at the Facility and Release to Customer, cGMP Batches that comply with the Manufacturing Process, cGMP and the Specifications, together with a Certificate of Analysis; provided, however, that cGMP manufacture shall not commence until at least [***] has been manufactured in compliance with the Specifications. Prior to commencement of cGMP manufacturing, Lonza shall review the process assumptions. In the event that there is a material difference in the process assumptions as compared with the process results demonstrated during the manufacture of the Technical Batches, the Parties shall meet to discuss in good faith a revision to the Batch Price to reflect such difference.
2.5Supply of Customer Information and Customer Materials. Customer shall supply to Lonza, free of charge, all Customer Information and Customer Materials and other information or materials that may be reasonably required by Lonza to perform the Services. Lonza shall not be responsible for any delays arising out of Customer’s failure to provide such Customer Information, Customer Materials, or other information or materials reasonably required to perform the Services to Lonza, and [***]. The parties shall agree the responsibility for shipment of Customer Materials in the respective Project Plan. Lonza hereby undertakes not to use the Customer Materials or Customer Information (or any part thereof) for any purpose other than the performance of the Services under this Agreement. With respect to any Customer Materials, title shall remain with the Customer and shall not transfer to Lonza.
2.6Raw Materials. Lonza shall procure all required Raw Materials as well as consumables other than those Raw Materials that are Customer Materials. Customer shall be responsible for payment for all consumables and Raw Materials ordered or irrevocably committed to be procured by Lonza hereunder for the manufacture of the Batches and/or the performance of the Services as agreed upon between the Parties. Upon cancellation of any Batch or termination of the Agreement by Customer, all unused Raw Materials shall be paid for by Customer (to the extent Customer has not previously made such payment to Lonza and to the extent that Raw Materials cannot be used by Lonza for its own use or the use of one of its customers) within [***] of invoice and at Customer’s option and cost will either be (a) held by Lonza for future use for the production of Product, (b) delivered to Customer, or (c) disposed of by Lonza.
2.7Review of Regulatory Submission. Prior to Customer’s submission of any information to the Regulatory Authority related in any way to Lonza or the Services provided under this Agreement (including without limitation information related to a Regulatory Authority’s request for additional information or an inspection, and Customer’s answer or other response thereto), Customer shall provide to Lonza copies thereof. Any regulatory support activities (including pre-Approval inspection) required and agreed
9
CONFIDENTIAL
to by Customer to support the Approval of the Drug Product or Product from the Facility shall be performed and supported by Lonza as reasonably requested by Customer. All such regulatory support activities shall be approved by the Customer in advance, and shall be paid for by the Customer at the Price set out in the applicable Project Plan. For the sake of clarity, the Parties agree that Lonza shall provide regulatory review, at the agreed hourly rate/day rate, with respect to all documents related to any regulatory submission. Customer shall submit those documents in time to Lonza in order for Lonza to review and provide comments for Customer’s consideration at Customer’s sole discretion on those sections referring to Lonza and related to the Services hereunder.
3Project Management / Steering Committee
3.1Project Plans. With respect to a new project to be governed by this Agreement, a new Project Plan shall be added by agreement in a writing signed by the Parties and appended to Appendix A. Each Project Plan shall include a description of the Services to be provided, the Product to be manufactured, Specifications, a schedule for completion of the Project Plan, pricing details, and such other information as is necessary for relevant Services. In the event of a conflict between the terms of a Project Plan and this Agreement, the terms of this Agreement will govern.
3.2Project Management. With respect to each Project Plan, each Party will appoint a project manager who will be the Party responsible for overseeing the Project Plan.
3.3Steering Committee. Each Party shall name a mutually agreed upon roughly equal number of representatives for the Steering Committee, which shall meet twice per calendar year, or as otherwise mutually agreed by the Parties. In the event that a Steering Committee dispute cannot be resolved, such dispute shall be escalated to a senior executive of each of Customer and Lonza.
The primary function of the Steering Committee is to ensure the ongoing communication between the Parties and discuss and resolve any issues arising under this Agreement. In addition to the primary function described above, the Steering Committee shall also take on the following responsibilities:
3.3.1discuss and seek resolution of issues around management of the Services;
3.3.2agree and monitor deadlines and milestones for the Services; and
3.3.3discuss and recommend any changes to the Services (although such changes will not take effect until they have been incorporated into a written amendment to the Project Plan which has been signed by the Parties).
3.4Person in Plant. During manufacturing of a Technical Batch, Customer shall be permitted to have [***] at the drug product manufacturing Facility as reasonably requested by Customer, at any time during the Manufacturing Process for the purpose of observing, reporting on, and consulting as to the performance of the Services. During manufacturing of the GMP Batches, Customer shall be permitted to have [***] at the drug product manufacturing Facility as reasonably requested by Customer, at any time during the GMP Manufacturing Process for the purpose of observing and reporting on the performance of the Services.
Furthermore, unless otherwise agreed to by the Parties, if Lonza does not have suitable space at Lonza’s Services site for drug product (“Drug Product Services Site”),
10
CONFIDENTIAL
Customer shall [***]. In addition, Customer shall be permitted [***] within the Drug Product Services Site as visitor(s), for visits over periods to be determined by mutual agreement to (a) facilitate real-time (same time-zone) communications between Customer technical drug product team and the Lonza drug product team, (b) facilitate transfer of process and analytical technology between the companies; (c) facilitate master batch record review and approval process; (d) perform technical review of manufacturing batch data; and/or (e) augment program management by providing local input.
Each such Customer employee or authorized representative shall be subject to and agree to abide by confidentiality obligations to Third Parties and Lonza's customary practices, and such employee agrees to comply with all instructions of Lonza’s employees at the drug product manufacturing Facility and/or Drug Product Services Site.
4.1Responsibility for quality assurance and quality control of Product shall be allocated between Customer and Lonza as set forth in the Quality Agreement and in Lonza standard operating procedures. If there is a conflict between the terms and conditions of this Agreement and the Quality Agreement, the terms and conditions of this Agreement shall prevail. If the Quality Agreement is not in place at the Effective Date, Lonza and Customer commit to enter into the Quality Agreement in a timely manner, but in no event later than the commencement of cGMP manufacturing.
4.2Provisions regarding inspections by Regulatory Authorities and audits shall be set out in the Quality Agreement.
5.1Customer shall, during the Term prior to any clinical use of the Product, obtain and maintain at its own cost and expense from a qualified insurance company, comprehensive general liability insurance in the amount of at [***]. Customer shall at least [***] prior to the first clinical use of a Product manufactured or Services provided under this Agreement, and for [***] after delivery of the last such Product, obtain and maintain at its own cost and expense from a qualified insurance company, comprehensive general liability insurance including, but not limited to product liability coverage in the amount of at least [***]. Lonza shall, during the Term and for [***] after delivery of the last Product manufactured or Services provided under this Agreement, obtain and maintain at its own cost and expense from a qualified insurance company, comprehensive general liability insurance including, but not limited to product liability coverage in the amount of at least [***] per claim. Each Party shall provide the respective other Party with a certificate of such insurance upon reasonable request.
6Forecasting, Ordering and Cancellation
6.1Forecasting. To the extent not already set forth in the then-current Project Plan, no later than the [***], Customer shall supply Lonza with a written forecast showing Customer’s good faith estimated [***] requirements for Batches for the [***] period (the “Forecast”). No later than [***] following Lonza’s receipt of a Forecast, Lonza shall inform the Customer of [***] and shall provide Customer with an estimated production schedule showing the estimated Commencement Date and estimated delivery date of each Batch. The forecast and [***] given in this Clause 6.1 shall not be binding on Customer or Lonza.
11
CONFIDENTIAL
6.2Purchase Orders. Customer shall place purchase orders binding on Customer for the number of Batches it wishes to order at least [***] (or earlier as [***]) prior to the Commencement Date for such Batches in accordance with Lonza’s most recent response to the Forecast. Each binding purchase order shall be signed by Customer and shall authorize Lonza to manufacture such Batches of the Product as are set forth therein. Lonza shall not be obligated to commence manufacture of any Batch unless and until such written purchase order is accepted in writing by Lonza. Any delivery date set forth in Lonza’s written confirmation of a purchase order shall be an estimated delivery date only. All ordered Xxxxxxx shall be scheduled in a single Campaign in each calendar year unless otherwise agreed by Lonza. Any additional or inconsistent terms or conditions of any Customer purchase order, acknowledgement or similar standardized form given or received pursuant to this Agreement shall have no effect and such terms and conditions are hereby rejected. For clarity, the then-current Project Plan shall be deemed a binding Purchase Order for the Batches set forth in the Project Plan with the Commencement Date of such Batches being the commencement dates set forth in the Project Plan, and Customer shall not be required to place separate Purchase Orders for such Batches to make them binding. Customer shall have the right to reschedule and/or cancel any of the Batches in the Project Plan in the same manner and pursuant to the same terms and conditions as the rescheduling and cancellation set forth in Clauses 6.3 through 6.6 as if they were the Batches ordered through a Purchase Order.
6.3Rescheduling. Lonza shall have the right to reschedule a Commencement Date of any Batch or Campaign upon reasonable prior written notice to Customer, provided that the rescheduled Commencement Date is less than [***] from the Commencement Date originally estimated at the time of Lonza’s acceptance of the binding purchase order, and further provided that Customer is able to provide the necessary Customer Materials. If the Customer requests to change the Commencement Date, Lonza will make all reasonable attempts to accommodate the request; provided, however, in the event that this change would impact other projects scheduled for occupancy in the designated suite or suites, manufacture of the Customer’s Batch or Campaign may be delayed until an adequate time period is available in the Facility schedule. Unless otherwise agreed, any such change requested by Customer may result in a rescheduling fee. Ordinary updates to the schedule during the execution of the Project Plan (via contract amendment /scope change) shall not be subject to a rescheduling fee.
6.4Cancellation of a Binding Purchase Order. Customer may cancel a binding purchase order upon written notice to Lonza, subject to the payment of a cancellation fee as calculated below (the “Cancellation Fee”):
6.4.1Development work: If Customer provides written notice of cancellation of any Development Work, Customer shall pay for any of the cancelled Development Work Lonza performed prior to the date of notification of cancellation and for any of such cancelled Development Work which would (were it not for the cancellation) have been performed during the period of [***] days post cancellation notification, unless otherwise agreed in the specific scope of work..
6.4.2Batches scheduled in a cGMP Facility: In the event that Customer provides written notice of cancellation to Lonza:
(a)less than or equal to [***] prior to the Commencement Date of the first subject Batch, then [***] ([***]%) of the Batch Price of each such Batch cancelled is payable;
12
CONFIDENTIAL
(b)more than [***] but less than or equal to [***] prior to the Commencement Date of the first subject Batch, then [***] ([***]%) of the Batch Price of each such Batch cancelled is payable;
(c)more than [***] prior to the Commencement Date of a subject Batch, then no Cancellation Fee is payable.
6.4.3Notwithstanding the provisions of Clause 6.4.2, (i) Lonza will use commercially reasonable efforts to reschedule its Facility to mitigate any losses from a cancellation, and if Lonza is able to reallocate any reserved capacity for the performance of services for any third party during the applicable period, then Customer’s obligation to pay the amounts under Clauses 6.4.1 or 6.4.2, shall be reduced pro-rata based on the use of such capacity for such third party during the applicable period; and (ii) notwithstanding anything to the contrary, no Cancellation Fee is payable by Customer for any cancellation or rescheduling to the extent resulting from Lonza’s action or inaction, either under this Agreement or the Original Agreement or otherwise. In particular, Customer may ask to replace the cancelled Services with another Customer project, subject to Lonza’s feasibility review and approval.
6.5Payment of Cancellation Fee. Any Cancellation Fee shall be payable within [***] following the written notice of cancellation associated with the cancelled Batch. Any Cancellation Fee shall include all costs associated with the cancelled Batch, including any Raw Materials.
6.6Replacement Project. Notwithstanding the foregoing, Lonza will use commercially reasonable efforts to secure a new project (but excluding any project then under contract with Lonza) for the cGMP manufacturing space, and for the same dates and duration that would have been occupied by Customer, and then, in such case, the Cancellation Fee for each Batch cancelled that is replaced by a Batch of the new project shall be reduced by an amount equal to [***] ([***]%) of the production fees associated with such replacement Batch.
7.1Delivery. All Drug Product shall be delivered FCA to the Facility (as defined by Incoterms® 2020), unless otherwise agreed in the Statement of Work. Lonza shall deliver to Customer the Certificate of Analysis and such other documentation as is reasonably required to meet all applicable regulatory requirements of the Governmental Authorities not later than the date of delivery of Batches (the “Release”). With respect to Drug Product, title and risk of loss shall remain with Lonza until Release and shall transfer to Customer upon Release in accordance with this provision.
7.2Storage. Product Batches will be stored at no charge for up to [***] after Release; provided that any additional storage beyond [***] will be subject to availability and, if available, will be charged to Customer and will be subject to a separate agreement. Customer shall arrange for shipment and take delivery of such Batch(es) from the Facility, at Customer’s expense, within [***] after Release or pay applicable storage costs, unless otherwise agreed to by the Parties. Lonza shall provide storage on a bill and hold basis for such Batch(es) at no charge for up to [***]; provided that any additional storage beyond [***] will be subject to availability and, if available, will be charged to Customer and will be subject to a separate agreement. In addition, Customer shall be responsible for all value added tax (VAT) and any other applicable taxes, levies, import, duties and fees of whatever nature imposed as a result of any storage. Unless otherwise agreed to by the Parties, in no event shall Lonza be required
13
CONFIDENTIAL
to store any Batch for more than [***] after Release. Within [***] following a written request from Lonza, Customer shall provide Lonza with a letter in form satisfactory to Lonza confirming the bill and hold status of each stored Batch.
7.3Acceptance/Rejection of Product.
7.3.1Promptly following Release of Batches, Customer shall inspect such Batches and shall have the right to test such Batches to determine compliance with the Specifications. Customer shall notify Lonza in writing of any rejection of a Batch based on any claim that it fails to meet Specifications within [***] of Release, after which time all unrejected Batches shall be deemed accepted.
7.3.2In the event that Lonza believes that a Batch has been incorrectly rejected, Lonza may require that Customer provide to Lonza Batch samples for testing. Lonza may retain and test the samples of such Batch. In the event of a discrepancy between Customer’s and Lonza’s test results such that Lonza’s test results fall within relevant Specifications, or there exists a dispute between the Parties over the extent to which such failure is attributable to a given Party, the Parties shall cause an independent laboratory promptly to review records, test data and perform comparative tests and/or analyses on samples of the Product that allegedly fails to conform to Specifications. Such independent laboratory shall be mutually agreed upon by the Parties. The independent laboratory’s results shall be in writing and shall be final and binding save for manifest error. Unless otherwise agreed to by the Parties in writing, the costs associated with such testing and review shall be borne by the Party against whom the independent laboratory rules.
7.3.3Lonza shall replace any Batch that failed to conform with the Specifications (a “Failed Batch”). In the event that it is determined (by the Parties or the independent laboratory) that such failure was [***] (“Lonza Responsibility”), Lonza agrees to [***]. The compensation is capped at [***]% of the price of that Failed Batch. If any replacement cGMP Batch provided as replacement for a Failed Batch also fails to conform to the Specifications due to Lonza’s Responsibility, then the Steering Committee shall decide in its sole discretion, if Lonza shall either replace such cGMP Batch or refund the amounts paid by Customer for such cGMP Batch. Such replacement shall be made as promptly as practicable, in light of available manufacturing capacity, after the confirmation of Lonza Responsibility, and in any case as soon as reasonably possible after confirmation of Lonza Responsibility. Where possible, such replacement Batch shall be manufactured with the next scheduled cGMP Batch or Campaign. Customer acknowledges and agrees that its [***] with respect to a Failed Batch that is a Lonza Responsibility is [***].
8.1Pricing for the Services provided by Lonza are set out in, and based on the assumptions and information set out in, the applicable Project Plan. In the event of changes to the Services based on Customer’s request, Customer shall bear all additional costs. Conversely, if Services scope of work within the Project Plan is reduced by formal contract amendment / scope change, Lonza shall revise quoted price to accurately reflect the reduced Services.
8.2Unless otherwise indicated in writing by Lonza, all Prices and charges are exclusive of value added tax (VAT) and of any other applicable taxes, levies, import, duties and fees of whatever nature imposed by or under the authority of any government or public
14
CONFIDENTIAL
authority and all such charges applicable to the Services (other than taxes on Lonza’s income) shall be paid by Customer. When sending payment to Lonza, the Customer shall quote the relevant invoice number in its remittance advice.
8.3Lonza shall issue invoices to Customer for [***] ([***]%) of the Price for Products or Services upon commencement thereof (the “Initiation Payment”) and [***] ([***]%) upon Release of applicable Batches or completion of applicable Services (the “Completion Payment”), unless otherwise stated in the Project Plan. Charges for Raw Materials and the Raw Materials Fee for each Batch shall be invoiced upon the Release of each Batch or completion of applicable Services. Charges for consumables and wearables, as well as charges for Services provided by External Laboratories, shall be invoiced upon the Release of the applicable Batch or completion of applicable Services at cost plus a fee of [***] ([***]%). All invoices are strictly net and payment must be made within [***] of date of invoice. Payment shall be made without deduction, deferment, set-off, lien or counterclaim, except as set forth in the Agreement or any Amendments. The provisions of this Clause 8.3, including the rate of markup charges set forth herein and in the definition of Raw Materials Fees, shall apply prospectively to all Services under the Agreement.
8.4If in default of payment of any undisputed invoice on the due date, interest shall accrue on any amount overdue at the lesser of (i) rate of [***] ([***]%) per month above the Swiss Average Rate Overnight (SARON) or (ii) the maximum rate allowable by applicable law, interest to accrue on a day to day basis until full payment; and Lonza shall, at its sole discretion, and without prejudice to any other of its accrued rights, be entitled to suspend the provision of the Services and or delivery of Product until all overdue amounts have been paid in full including interest for late payments.
8.5.1Not more than once per calendar year, Lonza may adjust the Price in accordance with [***] for the previous calendar year. The new Price reflecting such Batch Price adjustment shall be effective for any Batch for which the Commencement Date is on or after the date of Lonza’s notice to Customer of the Price adjustment.
8.5.2In addition to the above, the Price may be changed by Lonza, upon reasonable prior written notice to Customer (providing reasonable detail in support thereof), to reflect (i) an increase in variable costs (such as energy) by more than [***] ([***]%) (based on the initial Price or any previously amended Price), or for a process adjustment or assumption changes, and (ii) any material change in an environmental, safety or regulatory standard that substantially impacts Lonza’s cost and ability to perform the Services, in each case to the extent not already passed through to Customer.
9.1Upon agreement between the Parties, Lonza shall use commercially reasonable efforts to purchase Capital Equipment in a timely manner so as not to delay any of the Services to be performed by Lonza under a Project Plan. Parties shall notify each other in writing sufficiently in advance in the event that a Party foresees such purchase requirement.
15
CONFIDENTIAL
10.1Except as expressly otherwise provided herein, neither Party will, as a result of this Agreement, acquire any right, title, or interest in any Background Intellectual Property of the other Party.
10.2Subject to Clause 10.3, Customer shall own all right, title, and interest in and to any and all Intellectual Property that Lonza and/or its Affiliates, the External Laboratories or other contractors or agents of Lonza develops, conceives, invents, first reduces to practice or makes, solely or jointly with Customer or others, in the performance of the Services, to the extent such Intellectual Property is a direct derivative of or improvement to the Drug Product, Product, Drug Substances, Customer Materials, Customer Information and/or Customer Background Intellectual Property (collectively, the “New Customer Intellectual Property”). For avoidance of doubt, “New Customer Intellectual Property” shall include any material, processes or other items that solely embody, or that solely are claimed or covered by, any of the foregoing Intellectual Property, but excluding any New General Application Intellectual Property.
10.3Notwithstanding Clause 10.2, and subject to the license granted in Clause 10.5, Lonza shall own all right, title and interest in Intellectual Property that Lonza and/or its Affiliates, the External Laboratories or other contractors or agents of Lonza, solely or jointly with Customer, develops, conceives, invents, or first reduces to practice or makes in the course of performance of the Services to the extent such Intellectual Property (i) is generally applicable to the development or manufacture of chemical or biological products or product components, and could reasonably have been made without the use of the Drug Product, Drug Substances, Customer Materials, Customer Information, or Customer Background Intellectual Property or (ii) is an improvement of, or direct derivative of, any Lonza Information or Lonza Background Intellectual Property (“New General Application Intellectual Property”). For avoidance of doubt, “New General Application Intellectual Property” shall include any material, processes or other items that embody, or that are claimed or covered by, any of the foregoing Intellectual Property.
10.4Lonza hereby assigns to Customer all of its right, title and interest in any New Customer Intellectual Property. Lonza shall execute, and shall require its personnel as well as its Affiliates, External Laboratories or other contractors or agents and their personnel involved in the performance of the Services to execute, any documents reasonably required to confirm Customer’s ownership of the New Customer Intellectual Property, and any documents required to apply for, maintain and enforce any patent or other right in the New Customer Intellectual Property. Customer hereby assigns to Lonza all of its right, title and interest in any New General Application Intellectual Property. Customer shall execute, and shall require its personnel as well as its Affiliates and their personnel involved in the performance of the Services to execute, any documents reasonably required to confirm Lonza’s ownership of the New General Application Intellectual Property, and any documents required to apply for, maintain and enforce any patent or other right in the New General Application Intellectual Property.
10.5Subject to the terms and conditions set forth herein (including the payment of the Price as required above), Lonza hereby grants to Customer a non-exclusive, world-wide, fully paid-up, irrevocable, transferable license, including the right to grant sublicenses, under the New General Application Intellectual Property, to research, develop, make, have made, use, sell and import the Product.
10.6Customer hereby grants Lonza the non-exclusive right to use the Drug Substances, Drug Product, Product, Customer Materials, Customer Information, Customer Background Intellectual Property and New Customer Intellectual Property during the Term solely for the purpose of fulfilling its obligations under this Agreement.
16
CONFIDENTIAL
10.7Customer will have the right to transfer the Manufacturing Process to itself, its Affiliates and/or any third Party, provided, however, to the extent such technology transfer includes Lonza Confidential Information, or Lonza Background Intellectual Property, such technology transfer to any Third Party shall be subject to [***] and a reasonable royalty and/or licensing fee and terms to be agreed upon by the Parties. Lonza will not include in the Manufacturing Process any Lonza Confidential Information or Lonza Background Intellectual Property that would require Customer to pay any additional payment and/or royalty to Lonza in order to transfer the Manufacturing Process to itself, its Affiliates and/or any Third Party without first obtaining Customer’s prior written consent and advising Customer as to the royalty structure and any other payment that would apply for the use of such Lonza Confidential Information or Lonza Background Intellectual Property. If Customer has provided such consent and the Manufacturing Process includes the use of any such additional payment-bearing or royalty-bearing Lonza Confidential Information or Lonza Background Intellectual Property, then Customer will pay to Lonza an agreed royalty and/or other agreed payments for the use of Lonza Confidential Information or Lonza Background Intellectual Property. Lonza shall provide reasonably necessary documents to complete such technology transfer, including transfer of New General Application Intellectual Property, if applicable, and subject to the terms and conditions of this Clause 10.7, Lonza Confidential Information or Lonza Background Intellectual Property, if incorporated into the Manufacturing Process with Customer’s consent, and Customer shall reimburse Lonza for any costs (based on a full-time employee rate for such support) and expenses, provided that the total cost of such assistance (excluding any costs paid to Lonza for the use of Lonza’s Confidential Information or Lonza Background Intellectual Property) will not exceed [***].
10.8Data Usage. Notwithstanding the confidentiality provisions in Clause 13 as they may relate to the use of Services Data, the Parties agree that all Services Data may be collected, aggregated, hosted, mined or otherwise stored and maintained by Lonza and its Affiliates, Subcontractors and External Laboratories in a data platform utilized by Lonza to develop and improve services for the benefit of Lonza’s customers (the “Data Platform”). Customer hereby grants to Lonza a non-exclusive, royalty-free, worldwide, perpetual and irrevocable license solely to use Services Data in a blinded and aggregated format for Lonza’s purposes of (i) research, development, commercialization of, and securing rights to, development, manufacturing and testing systems, platforms, and service offerings, and (ii) use of the Data Platform for provision of services to Lonza’s customers, provided that the obligations set forth in this Clause shall at all times apply. As used in this Clause, “blinded” means neither Customer nor Drug Substances, Drug Product, Product, Customer Materials, Customer Information, Customer Background Intellectual Property and New Customer Intellectual Property or any other Customer property or information are identifiable.
11.1.1the Services shall be performed in a professional and workmanlike manner and in accordance with all Applicable Laws;
11.1.2Lonza will not knowingly include in the Manufacturing Process any elements that infringe any intellectual property rights controlled by any Third Party;
11.1.3except with respect to any development services and Non-Clinical Batches (including the Technical Batches), the manufacture of Product shall be performed in accordance with cGMP and will meet the Specifications at the
17
CONFIDENTIAL
11.1.4the manufacture of the Non-Clinical Batches (including the Technical Batches) shall be performed as required in the Project Plan;
11.1.5it or its Affiliate holds all necessary permits, approvals, consents and licenses to enable it to perform the Services at the Facility;
11.1.6it has the necessary corporate authorizations to enter into and perform this Agreement;
11.1.7Lonza has never been debarred under the Generic Drug Enforcement Act of 1992, 21 U.S.C. Sec. 335a (a) or (b) (the “Act”). In the event that during the term of this Agreement, Lonza becomes debarred, suspended, excluded, sanctioned, or otherwise declared ineligible under the Act; Lonza agrees to promptly notify Customer. Lonza also agrees that in the event that it becomes debarred, suspended, excluded, sanctioned, or otherwise declared ineligible under the Act, it shall promptly cease all activities relating to this Agreement; and
11.1.8subject to payment of undisputed invoices, title to all Product and all New Customer Intellectual Property provided to Customer under this Agreement shall pass free and clear of any security interest, lien or other encumbrance in favour of Lonza.
11.2Customer warrants that:
11.2.1as of the date of this Agreement to the best of the Customer’s knowledge and belief, the Customer has all the rights necessary to permit Lonza to perform the Services without infringing the Intellectual Property rights of any Third Party and the performance of the Services shall not infringe any Third Party Intellectual Property rights;
11.2.2Customer will promptly notify Lonza in writing if it receives or is notified of a formal written claim from a Third Party that Customer Information and/or Customer Intellectual Property or that the use by Lonza thereof for the provision of the Services infringes any Intellectual Property or other rights of any Third Party; and
11.2.3Customer has the necessary corporate authorizations to enter into this Agreement.
11.3DISCLAIMER: THE WARRANTIES EXPRESSLY SET FORTH IN THIS AGREEMENT ARE IN LIEU OF ALL OTHER WARRANTIES, AND ALL OTHER WARRANTIES, BOTH EXPRESS AND IMPLIED, ARE EXPRESSLY DISCLAIMED, INCLUDING WITHOUT LIMITATION ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
11.4.1In the event a Party receives a notice from the other party (“Defaulting Party”) or otherwise becomes aware that a debarment, suspension, exclusion, sanction, or declaration of ineligibility action has been brought against the Defaulting Party; then the Party receiving such notice shall have the right to terminate this Agreement immediately; provided that if such event shall occur,
18
CONFIDENTIAL
the Party receiving such notice shall not have such right of termination if the Defaulting Party is disputing and defending such action and the Defaulting Party is otherwise able to perform its services in the manner required under this Agreement.
11.4.2Each Party shall ensure that it will not knowingly use in any capacity the services of any individual, corporation, partnership or association which has been debarred under 21 U.S.C. Sec. 335a(a) or (b), or listed in the DHHS/OIG List of Excluded Individuals/Entities or the General Services Administration's Listing of Parties Excluded from Federal Procurement and Non-Procurement Programs.
12Indemnification and Liability
12.1Indemnification by Lonza. Lonza shall indemnify the Customer, its Affiliates, and their respective officers, employees and agents (“Customer Indemnitees”) for any loss, damage, costs and expenses (including reasonable attorney fees) that Customer Indemnitees may suffer as a result of any Third Party claim arising directly out of [***] except, in each case, to the extent that such claims resulted from the negligence, intentional misconduct or breach of this Agreement by any Customer Indemnitees. Notwithstanding the foregoing, Lonza shall have no obligations under this Clause 12.1 for any liabilities, expenses, or costs to the extent arising out of or relating to claims covered under Clause 12.2.
12.2Indemnification by Customer. Customer shall indemnify Lonza, its Affiliates, and their respective officers, employees and agents (“Lonza Indemnitees”) from and against any loss, damage, costs and expenses (including reasonable attorney fees) that Lonza Indemnitees may suffer as a result of any Third Party claim arising directly out of [***]; except, in each case, to the extent that such claims resulted from the negligence, intentional misconduct or breach of this Agreement by any Lonza Indemnitees. Notwithstanding the foregoing, Customer shall have no obligations under this Clause 12.2 for any liabilities, expenses, or costs to the extent arising out of or relating to claims covered under Clause 12.1.
12.3Indemnification Procedure. If the Party to be indemnified intends to claim indemnification under this Clause 12, it shall promptly notify the indemnifying Party in writing of such claim. The indemnitor shall have the right to control the defense and/or settlement thereof; provided, however, that (i) the indemnitor must obtain the prior written consent of the indemnitee (not to be unreasonably withheld) before entering into any settlement of such Third Party claim, and (ii) any indemnitee shall have the right to retain its own counsel at its own expense. The indemnitee, its employees and agents, shall reasonably cooperate with the indemnitor in the investigation of any liability covered by this Clause 12. The failure to deliver prompt written notice to the indemnitor of any claim, to the extent prejudicial to its ability to defend such claim, shall relieve the indemnitor of any obligation to the indemnitee under this Clause 12.
12.4DISCLAIMER OF CONSEQUENTIAL DAMAGES. IN NO EVENT SHALL EITHER PARTY BE LIABLE TO THE OTHER PARTY FOR INCIDENTAL, INDIRECT, SPECIAL, PUNITIVE OR CONSEQUENTIAL DAMAGES, LOST PROFITS OR LOST REVENUES ARISING FROM OR RELATED TO THIS AGREEMENT, EXCEPT TO THE EXTENT RESULTING FROM FRAUD, GROSS NEGLIGENCE OR INTENTIONAL MISCONDUCT AND/OR FOR EITHER PARTY’S BREACH OF ARTICLE 13 HEREOF.
19
CONFIDENTIAL
12.5LIMITATION OF LIABILITY. LONZA’S LIABILITY UNDER THIS AGREEMENT SHALL IN NO EVENT EXCEED, IN THE AGGREGATE, [***], EXCEPT TO THE EXTENT RESULTING FROM LONZA’S FRAUD, GROSS NEGLIGENCE OR INTENTIONAL MISCONDUCT.
13.1A Party receiving Confidential Information (the “Receiving Party”) agrees to strictly keep secret any and all Confidential Information received during the Term from or on behalf of the other Party (the “Disclosing Party”) using at least the same level of measures as it uses to protect its own Confidential Information, but in any case at least commercially reasonable and customary efforts. Confidential Information shall include information disclosed in any form including but not limited to in writing, orally, graphically or in electronic or other form to the Receiving Party, observed by the Receiving Party or its employees, agents, consultants, or representatives, or otherwise learned by the Receiving Party under this Agreement, which the Receiving Party knows or reasonably should know is confidential or proprietary.
13.2Notwithstanding the foregoing, Receiving Party may disclose to any courts and/or other authorities Confidential Information which is or will be required pursuant to applicable governmental or administrative or public law, rule, regulation or order. In such case the Party that received the Confidential Information will, to the extent legally permitted, inform the other Party promptly in writing and cooperate with the Disclosing Party in seeking to minimize the extent of Confidential Information which is required to be disclosed to the courts and/or authorities.
13.3The obligation to maintain confidentiality under this Agreement does not apply to Confidential Information, which:
13.3.1at the time of disclosure was publicly available; or
13.3.2is or becomes publicly available other than as a result of a breach of this Agreement by the Receiving Party; or
13.3.3as the Receiving Party can establish by competent proof, was rightfully in its possession at the time of disclosure by the Disclosing Party and had not been received from or on behalf of Disclosing Party; or
13.3.4is supplied to a Party by a Third Party which was not in breach of an obligation of confidentiality to Disclosing Party or any other party; or
13.3.5is developed by the Receiving Party independently from and without use of the Confidential Information, as evidenced by contemporaneous written records.
13.4The Receiving Party will use Confidential Information only for the purposes of this Agreement and will not make any use of the Confidential Information for its own separate benefit or the benefit of any Third Party including, without limitation, with respect to research or product development or any reverse engineering or similar testing. The Receiving Party agrees to return or destroy promptly (and certify such destruction) on Disclosing Party’s request all written or tangible Confidential Information of the Disclosing Party, except that one copy of such Confidential Information may be kept by the Receiving Party in its confidential files for record keeping purposes only.
20
CONFIDENTIAL
13.5Each Party will restrict the disclosure of Confidential Information to such officers, employees, professional advisers, finance-providers, consultants and representatives of itself and its Affiliates who have been informed of the confidential nature of the Confidential Information and who have a need to know such Confidential Information for the purpose of this Agreement or an applicable financing or acquisition. Both Parties may disclose Confidential Information of the other Party and its Affiliates to potential and actual acquirers provided such disclosure is limited to the terms of this Agreement. Customer also may disclose to its potential and actual: (i) acquirers and (ii) bona fide collaborators in the research, development and commercialization of the Products, the work product provided to Customer by Lonza as a consequence of the provision of the Services. Prior to disclosure to such persons, the Receiving Party shall inform the Disclosing Party and it shall bind its and its Affiliates’ officers, employees, consultants and representatives to confidentiality and non-use obligations no less stringent than those set forth herein. The Receiving Party shall notify the Disclosing Party as promptly as practicable of any unauthorized use or disclosure of the Confidential Information.
13.6The Receiving Party shall at any time be fully liable for any and all breaches of the confidentiality obligations in this Clause 13 by any of its Affiliates or the employees, consultants, potential and actual acquirers, and representatives of itself or its Affiliates.
13.7Each Party hereto expressly agrees that any breach or threatened breach of the undertakings of confidentiality provided under this Clause 13 by a Party may cause irreparable harm to the other Party and that money damages may not provide a sufficient remedy to the non-breaching Party for any breach or threatened breach. In the event of any breach and/or threatened breach, then, in addition to all other remedies available at law or in equity, the non-breaching Party shall be entitled to seek injunctive relief and any other relief deemed appropriate by the non-breaching Party.
14.1Term. This Agreement shall commence on the Effective Date and shall end on the fifth (5th) anniversary of the Effective Date unless terminated earlier as provided herein or extended by mutual written consent of the Parties (the “Term”). Notwithstanding the foregoing, each Project Plan may have separate term and termination provisions so long as the term of any Project Plan does not extend beyond the Term.
14.2Termination. This Agreement may be terminated as follows:
14.2.1by either Party for any reason upon [***] prior written notice; provided that Lonza may not provide such notice until the [***] anniversary of the Effective Date. In such an event all cancellation terms in this Agreement shall apply (except, in the case of termination by Lonza pursuant to Clause 14.2.1, the Cancellation Fees shall not apply), and the Customer shall make payments for work commenced and performed under any purchase order(s) by Lonza prior to the termination notice date;
14.2.2by either Party if the other Party breaches a material provision of this Agreement or a Project Plan and fails to cure such breach to the reasonable satisfaction of the non-breaching Party within [***] ([***] for non-payment) following written notification of such breach from the non-breaching party to the breaching party; provided, however, that such [***] period shall be extended as agreed by the Parties if the identified breach is incapable of cure within [***] and if the breaching Party provides a plan and timeline to cure the breach, promptly commences efforts to cure the breach and diligently prosecutes such
21
CONFIDENTIAL
14.2.3by either Party, immediately, if the other Party becomes insolvent, is dissolved or liquidated, makes a general assignment for the benefit of its creditors, or files or has filed against it, a petition in bankruptcy or has a receiver appointed for a substantial part of its assets; or
14.2.4by either Party pursuant to Clause 15.
14.3Consequences of Termination. In the event of termination hereunder, Lonza shall be compensated for (i) Services rendered up to the date of termination, including in respect of any Product in-process; (ii) all costs incurred through the date of termination, including Raw Materials costs and Raw Materials Fees for Raw Materials used or purchased for use in connection with the Project Plan; (iii) all unreimbursed Capital Equipment and related decommissioning charges incurred pursuant to Clause 9; (iv) all Cancellation Fees due under Clause 6.4. In the case of termination by Lonza for Customer’s material breach, Cancellation Fees shall be calculated as of the date of written notice of termination.
14.4Survival. The rights and obligations of each Party which by their nature survive the termination or expiration of this Agreement shall survive the termination or expiration of this Agreement, including Clauses 5, 10-13 and 16 (to the extent relevant).
15.1If Lonza is prevented or delayed in the performance of any of its obligations under the Agreement by Force Majeure and gives written notice thereof to Customer specifying the matters constituting Force Majeure together with such evidence as Lonza reasonably can give and specifying the period for which it is estimated that such prevention or delay will continue, Lonza shall be excused from the performance or the punctual performance of such obligations as the case may be from the date of such notice for so long as such cause of prevention or delay shall continue. Provided that, if such Force Majeure persists for a period of [***] or more, Customer may terminate this Agreement by delivering written notice to Lonza.
15.2“Force Majeure” shall be deemed to include any reason or cause beyond Lonza’s reasonable control affecting the performance by Lonza of its obligations under the Agreement, including, but not limited to, any cause arising from or attributable to acts of God, strike, labor troubles, restrictive governmental orders or decrees, riots, insurrection, war, terrorist acts, or the inability of Lonza to obtain any required raw material, energy source, equipment, labor or transportation, at prices and on terms deemed by Lonza to be reasonably practicable, from Lonza’s usual sources of supply.
15.3With regard to Lonza, any such event of Force Majeure affecting services or production at its Affiliates or suppliers shall be regarded as an event of Force Majeure.
16.1Each Party shall comply with, and shall cause its Affiliates, subsidiaries, subcontractors, directors, officers, employees, agents or any other person acting on behalf of Lonza to comply with, all applicable Corruption Laws and International Trade Restrictions, and shall obtain all necessary export and re-export written consents, permits, and authorizations required by International Trade Restrictions; and
22
CONFIDENTIAL
16.2In connection with the preparation and the performance of this Agreement, each Party shall take appropriate technical and organizational measures to comply with the GDPR, to the extent it is applicable. Lonza shall in compliance with GDPR as well as on Customer’s request, destroy all personal data, unless Applicable Law prevents Lonza from such destruction. Lonza confirms that any personal identifiable data shared with Customer for the purposes of the Services, the preparation and the performance of this Agreement is done in accordance with the requirements of the GDPR.
17.1Severability. If any provision hereof is or becomes at any time illegal, invalid or unenforceable in any respect, neither the legality, validity nor enforceability of the remaining provisions hereof shall in any way be affected or impaired thereby. The Parties hereto undertake to substitute any illegal, invalid or unenforceable provision by a provision which is as far as possible commercially equivalent considering the legal interests and the Purpose.
17.2Amendments. Modifications and/or amendments of this Agreement must be in writing and signed by the Parties.
17.3Assignment. Lonza shall be entitled to instruct one or more of its Affiliates to perform any of Lonza’s obligations contained in this Agreement, but Lonza shall remain fully responsible in respect of those obligations. Neither Party may assign its interest under this Agreement without the prior written consent of the other Party, such consent not to be unreasonably withheld, conditioned or delayed, provided, however that either Party may assign this Agreement to (i) any Affiliate of such Party or (ii) any third party in connection with the sale or transfer (by whatever method) of all or substantially all of the assets of the business or Product of such Party to which this Agreement relates, whether by merger, consolidation, acquisition or other form of business combination. Any purported assignment without a required consent shall be void. No assignment shall relieve any Party of responsibility for the performance of any obligation that accrued prior to the effective date of such assignment. Lonza shall be entitled to sell, assign and/or transfer its trade receivables resulting from this Agreement without the consent of the Customer.
17.4Notice. All notices must be written and sent to the address of the Party first set forth above. All notices must be given (a) by personal delivery, with receipt acknowledged, (b) by facsimile followed by hard copy delivered by the methods under (c) or (d), (c) by prepaid certified or registered mail, return receipt requested, or (d) by prepaid recognized next business day delivery service. Notices will be effective upon receipt or at a later date stated in the notice.
17.5Governing Law/Jurisdiction. This Agreement is governed in all respects by the laws of [***], without regard to its conflicts of laws principles. The Parties agree to submit to the jurisdiction of the state and federal courts located in [***].
17.6Entire Agreement. This Agreement contains the entire agreement between the Parties as to the subject matter hereof and supersedes all prior and contemporaneous agreements with respect to the subject matter hereof. This Agreement may be executed in any number of counterparts, each of which shall be deemed to be an original, and all of which together shall constitute one and the same document. Each Party acknowledges that an original signature or a copy thereof transmitted by facsimile or by .pdf shall constitute an original signature for purposes of this Agreement.
23
CONFIDENTIAL
IN WITNESS WHEREOF, each of the Parties hereto has caused this Development and Manufacturing Services Agreement to be executed by its duly authorized representative effective as of the date written above.
[SIGNATURES FOLLOW ON THE NEXT PAGE]
24
CONFIDENTIAL
LONZA LTD
By: /s/ Xxxxxx Xxxxxx
Name Xxxxxx Xxxxxx
Title
Date 13-Apr-2022
By: /s/ Xxxxx Xxxxxx
Name Xxxxx Xxxxxx
Title
Date 13-Apr-2022
Vaxcyte, Inc.
By: /s/ Xxxxx Xxxxxxxxx
Name Xxxxx Xxxxxxxxx
Title CEO
Date 4/12/2022
25
CONFIDENTIAL
APPENDIX A
Project Plan A
[***]
26
CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS BOTH (I) NOT MATERIAL AND (II) IS THE TYPE THAT THE REGISTRANT TREATS AS PRIVATE OR CONFIDENTIAL.
FIRST AMENDMENT TO DEVELOPMENT AND MANUFACTURING
SERVICES AGREEMENT
This First Amendment (the “First Amendment”), comes into effect on May 12, 2022 (the “First Amendment Effective Date”), is made by and between Lonza Ltd (“Lonza”) and Vaxcyte, Inc. (“Vaxcyte” or “Customer”). This First Amendment is to be incorporated as part of the Development and Manufacturing Services Agreement, dated March 22, 2022, between Lonza and Vaxcyte (the “Original Agreement”). Lonza and Vaxcyte, hereafter referred to as a “Party” and collectively as the “Parties.”
Whereas:
1.Lonza and Vaxcyte entered into the Original Agreement which the Parties now desire to amend;
2.The Parties wish to amend the Original Agreement by adding a new Project Plan B, attached hereto, in the Appendix A of the Original Agreement.
NOW, THEREFORE, the Parties hereby agree that the following amendments are made to the Original Agreement:
1.All capitalized terms used herein shall have the meaning set forth in the Original Agreement.
2.The Parties hereby agree that the wording attached herein shall be added to the Original Agreement Appendix A as Project Plan B.
3.All other terms and conditions of the Original Agreement, as amended, shall remain in full force and effect. In the event of any conflict between the terms and conditions of this First Amendment and the Original Agreement, the terms and conditions set forth in the Original Agreement shall control.
IN WITNESS WHEREOF, Vaxcyte and Lonza hereby enter into this First Amendment, effective as of the Tenth Amendment Effective Date.
VAXCYTE, INC LONZA LTD
By: /s/ Xxxxx Xxxxxxxxx By: /s/ Xxxxx Xxxxxx
Name: Xxxxx Xxxxxxxxx Name:
Title: CEO Title:
By: By: /s/ Xxxxxx Xxxxxx
Name: Name:
Title: Title:
27
CONFIDENTIAL
APPENDIX A
Project Plan B
[***]
28
CONFIDENTIAL
CERTAIN CONFIDENTIAL INFORMATION CONTAINED IN THIS DOCUMENT, MARKED BY [***], HAS BEEN OMITTED BECAUSE IT IS BOTH (I) NOT MATERIAL AND (II) IS THE TYPE THAT THE REGISTRANT TREATS AS PRIVATE OR CONFIDENTIAL.
SECOND AMENDMENT TO DEVELOPMENT AND MANUFACTURING SERVICES AGREEMENT
This Second Amendment (the “Second Amendment”), comes into effect on November 21, 2022 (the “Second Amendment Effective Date”), is made by and between Lonza Ltd (“Lonza”) and Vaxcyte, Inc. (“Vaxcyte” or “Customer”). This Second Amendment is to be incorporated as part of the Development and Manufacturing Services Agreement, dated March 22, 2022, between Lonza and Vaxcyte (the “Original Agreement”). Lonza and Vaxcyte, hereafter referred to as a “Party” and collectively as the “Parties.”
Whereas:
1.Lonza and Vaxcyte entered into the Original Agreement which the Parties now desire to amend;
2.The Parties wish to modify the Project Plan A for the manufacturing of the Customer’s [***].
NOW, THEREFORE, the Parties hereby agree that the following amendments are made to the Original Agreement:
1.All capitalized terms used herein shall have the meaning set forth in the Original Agreement.
2.The Parties hereby agree that the wording attached herein shall replace the Original Agreement Appendix A as Project Plan A. [***].
3.All other terms and conditions of the Original Agreement, as amended, shall remain in full force and effect. In the event of any conflict between the terms and conditions of this Second Amendment and the Original Agreement, the terms and conditions set forth in the Original Agreement shall control.
IN WITNESS WHEREOF, Vaxcyte and Lonza hereby enter into this Second Amendment, effective as of the Tenth Amendment Effective Date.
VAXCYTE, INC LONZA LTD
By: /s/ Xxxxx Xxxxxxxxx By: /s/ Xxxxxx Xxxxxx
Name: Xxxxx Xxxxxxxxx Name
Title: CEO Title:
By: By: /s/ Xxxxx Xxxxxx
Name: Name
Title: Title:
29
CONFIDENTIAL
Appendix A
Project Plan A
[***]
30