SUPPLIER AGREEMENT Norman Noble, Inc. FoxHollow Technologies, Inc.
Exhibit 10.14
Xxxxxx Xxxxx, Inc.
This Supplier Agreement (“Agreement”) dated effective as of March 25, 2005 (the “Effective Date”), by and between Xxxxxx Xxxxx, Inc., an Ohio corporation, having its offices at 0000 Xxxxx Xxxx Xxxxx, Xxxxxxxx Xxxxxxx, Xxxx 00000 (“NNI”) and Fox Hollow Technologies, Inc. a Delaware corporation, having offices at 000 Xxx Xxxx, Xxxxxxx, Xxxxxxxxxx 00000 (“FHT”).
WITNESSETH:
WHEREAS, the parties wish to enter into a long-term supply contract for the purchase by FHT from NNI of certain Products (as defined below) on the terms and subject to the conditions set forth herein; and
NOW, THEREFORE, FHT and NNI hereby agree as follows:
ARTICLE 1. PRODUCTS
Section 1.1 Products
(a) For purposes of this Agreement, the term Product or Products shall mean the items listed on Schedule I, as amended by the parties from time to time.
(b) FHT shall offer NNI the option to submit a quotation to manufacture any new products developed by FHT, including, any catheter products in the coronary market. The parties shall negotiate in good faith the pricing for such products and they shall then be added as Products on Schedule I if a mutually acceptable agreement is reached.
Section 1.2 Specifications
For purposes of this Agreement, the term Specifications shall mean the items detailed on Schedule III.
ARTICLE 2. PURCHASE AND SUPPLY COMMITMENT
Section 2.1 FHT’s Purchase Obligation
(a) During the initial Term of this Agreement, and any extended Term, FHT shall purchase from NNI at least 80% of FHT’s annual unit requirements of each Product listed on Schedule I (the “Requirements Purchase Obligation”). In addition, during the initial Term of this Agreement, FHT shall purchase from NNI the minimum number of units of each Product as specified on Schedule I (the “Unit Purchase Obligation”).
(b) Each month during the Term, FHT shall provide NNI with a rolling six month forecast with respect to FHT’s anticipated requirements for the Products (the “Forecast”). FHT shall be required to purchase the quantity of Products specified in the first two months of the Forecast. NNI will rely on the Forecasts to purchase raw materials to be used in the manufacture of the Products.
2
(c) FHT shall not be required to purchase any particular mix of Products, provided that it meets the Requirements Purchase Obligation and Unit Purchase Obligation. FHT shall be excused from complying with the Requirements Purchase Obligation and the Unit Purchase Obligation if NNI is unable to meet the Specifications, technical requirements or reasonable quality standards set forth by FHT after notice and an opportunity to cure or if NNI is in material breach of this Agreement.
(d) At the end of each year during the Term or extended term, FHT shall examine its expenditures for purchasing the Products paid by FHT to third parties. If FHT did not meet the Requirements Purchase Obligation during the preceding year, then FHT shall be required to pay to NNI as liquidated damages an amount equal to 50% of the unit number of Products procured from third parties that should have been procured from NNI multiplied by the applicable price as if the Products were purchased from NNI. FHT shall pay the amount due within 30 days of the end of the year.
(e) At the end of the first 18 months of the initial Term of this Agreement, for each Product for which FHT did not meet the Unit Purchase Obligation, FHT shall pay to NNI as liquidated damages an amount equal to 50% of the unit number by which its actual purchases was less than the Unit Purchase Obligation multiplied by the applicable price as if the Products had been purchased from NNI. For example, if the Unit Purchase Obligation for a Product was 20,000 units, and FHT purchased only 15,000 units during the first 18 month of the initial Term, then FHT would pay to NNI an amount equal to 2,500 units (50% of the difference between the 20,000 Unit Purchase Obligation and the 15,000 actual unit purchases) multiplied by the applicable price for those units as if they had been purchased from NNI. The payment to be made by FHT in such case shall be paid no later than 30 days following the end of the first 18 months of the initial Term. Upon payment of the amount due pursuant to this paragraph, NNI will credit FHT with having met the Unit Purchase Obligation for the first 18 months of the Initial Term for purposes of calculating the price per unit under Schedule II of this Agreement, but not for calculating the Unit Purchase Obligation for the second 18 months of the Initial Term. Further examples of the application of this paragraph are set forth in Schedule IV.
(f) At the end of the initial Term of this Agreement, for each Product for which FHT did not meet the Unit Purchase Obligation, FHT shall pay to NNI as liquidated damages an amount equal to 25% of the unit number by which its actual purchases was less than the Unit Purchase Obligation multiplied by the applicable price as if the Products had been purchased from NNI. The payment to be made by FHT in such case shall be paid no later than 30 days following the end of the second 18 months of the initial Term.
(g) If this Agreement is terminated other than by FHT in accordance with the terms of Section 4.2 below, then FHT shall pay to NNI as liquidated damages an amount equal to 80% of the unit number by which its actual purchases was less than the Unit Purchase Obligation for the entire Term multiplied by the applicable price as if the Products had been purchased from NNI. The payment to be made by FHT in such case shall be paid no later than 30 days following termination.
3
(h) During any extended Term of this Agreement, if the parties have not agreed to minimum unit purchase obligations for that extended Term, NNI may, at its expense, have an independent public accounting firm audit FHT’s purchasing and other records to determine whether FHT has complied with the Requirements Purchase Obligation and Unit Purchase Obligation. The accounting firm must execute a reasonable confidentiality agreement to protect the confidentiality of the records to which it will be given access by FHT. FHT will use its best efforts to accommodate the accounting firm during such audit by providing all documents reasonably requested to determine compliance. The accounting firm will report to NNI only whether or not FHT has complied with the Requirements Purchase Obligation, and, if not, sufficient information about the non-compliance to enable NNI to calculate the amount of liquidated damages to which it is entitled pursuant to this Section 2.1 of this Agreement. NNI will be entitled to one audit per year.
(i) NNI will use commercially reasonable efforts to provide FHT’s requirements of the Products.
Section 2.2 Orders
FHT may place purchase orders with NNI for Products using FHT’s standard forms, but no terms and conditions on those standard forms shall apply or vary the terms of this Agreement unless NNI has agreed to those separate or additional terms in writing.
Section 2.3 Product Improvements, Design Modifications and other Changes
Either party may request a change to any mechanical, component, material, packaging or process (“Engineering Changes”). No Engineering Change shall become effective unless FHT and NNI agree in writing as to any price change due to the implementation of the Engineering Change.
ARTICLE 3. TERMS
The following terms shall apply to sales of Products by NNI to FHT during the Term or any extended Term of this Agreement.
Section 3.1 Pricing and Payment
(a) Products pricing shall be as set forth in the attached Schedule II.
(b) NNI shall mail invoices to FHT immediately upon shipment of Products. FHT shall pay the NNI invoices within 30 days of invoice date (“Due Date”). If invoices are not paid in full by the Due Date, then a finance charge of 1.5% per month (18% annual) shall be added to any outstanding balances.
(c) All shipments are FOB NNI’s manufacturing facility. FHT may select transportation modes and carriers. FHT is liable for all Product freight charges. If FHT does not specify the carrier, NNI may select the carrier, but FHT is still liable for freight charges. If FHT does not arrange to prepay for the freight charges, or provide NNI with an account number against which to charge the freight charges, NNI may prepay the freight charges and add the cost to the invoice.
4
(d) NNI shall not be considered late in deliveries of the Products or in any way in breach of this agreement if the raw materials needed to make the Products are unavailable due to the fault of the supplier of such raw materials. NNI shall protect against this by carrying a two month inventory of raw material that, should FHT default on this agreement, will be the responsibility of FHT. NNI shall make good faith efforts to utilize such leftover material but to the extent such alternative uses are not found, FHT shall (at its option) either purchase said materials from NNI at NNI’s actual cost or reimburse NNI and allow NNI to keep or dispose of said materials.
Section 3.2 Warranty
(a) NNI warrants that all Products shall meet the Specifications. NNI warrants that it shall comply with all present and future statutes, laws, ordinances and regulations relating to the manufacture and supply of the Products. NNI MAKES NO OTHER WARRANTY, EXPRESS OR IMPLIED, AND NNI EXPRESSLY DISCLAIMS ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR ANY PARTICULAR PURPOSE, AND ALL OTHER WARRANTIES ARE HEREBY EXPRESSLY EXCLUDED.
(b) The exclusive remedy for breach of the foregoing warranty Agreement shall be repair or replacement of the defective Products or, at NNI’s option, refund of the purchase price paid for the defective Products.
(c) UNDER NO CIRCUMSTANCES SHALL NNI BE LIABLE TO FHT FOR INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES OR DAMAGES FOR LOSS OF USE ARISING DIRECTLY OR INDIRECTLY FROM ANY BREACH OF WARRANTY, BREACH OF CONTRACT, MATERIAL OR OTHERWISE, OR FROM ANY ACTS OR OMISSIONS OF NNI’S EMPLOYEES OR AGENTS, TORTIOUS OR OTHERWISE. IN NO EVENT SHALL NNI’S LIABILITY FOR ANY CLAIM BROUGHT BY FHT EXCEED THE PRICE OF THE DEFECTIVE PRODUCT.
Section 3.3 Indemnification
FHT shall defend and indemnify NNI from all claims arising from NNI’s manufacture and sale of the Products, whether for personal injury, property damage or otherwise, including any claims premised on negligence, strict liability, breach of warranty or infringement of a third party’s intellectual property rights (provided that the accused infringement is solely caused by NNI’s compliance with FHT’s specifications); provided, however, that FHT shall not be liable for any award of damages which results from NNI’s failure to manufacture the Products in conformance with specifications. NNI shall cooperate with the defense of any claim for which it seeks indemnification and may, at its expense, retain counsel of its choice to serve as co-counsel for its defense. NNI and FHT shall be entitled to recover any costs, including attorneys’ fees, incurred in connection with enforcing its rights under this Section.
5
Section 3.4 Force Majeure
Neither party shall be liable to the other if its performance is hindered, delayed or prevented as a result of (i) acts of God; (ii) expropriation, confiscation or requisitioning of facilities or compliance with any law, decree, regulation, order, directive or request of any governmental authority or person(s) purporting to act therefore that affects to a degree not presently existing the supply, availability or use of materials, equipment or labor; (iii) acts or inaction on the part of any governmental authority or person purporting to act therefore; (iv) acts of war or the public enemy whether war be declared or not; (v) public disorders, insurrection, rebellion, sabotage, riots or violent demonstrations; (vi) explosions, fires, earthquakes or other natural calamities; (vii) strikes or lockouts or other industrial action by workers or employees of the NNI. Notwithstanding the foregoing, no event of Force Majeure shall excuse the payment of money when it is due.
Section 3.2 Quality and Records
(a) NNI will maintain quality assurance and quality controls as appropriate. NNI presently is ISO 9002-2000, DS/EN 4602 and ISO 13485:2003 certified and will maintain such certifications during the Term and any extended Term. NNI shall be responsible for the traceability of the Products.
(b) NNI will at its cost, take samples, perform inspections and issue certificates as required by the Specifications. NNI will provide FHT with current Materials Safety Data Sheets for the Products, certificates of analysis, identification of materials covered by Prop. 65, and other related information; such as toxicological data that FHT may reasonably request to enable FHT to comply with all applicable federal, state and municipal statutes, regulations, rules and ordinances relating to FHT’s use of Products. NNI will maintain and make available to FHT a Device History Record for the production of the Products, including all documents required by the FDA, by applicable law or regulation, or reasonably requested by FHT, for example: (1) process specifications; (2) In process controls; (3) Quality Control test specifications; (4) Release Specifications; (5) Production schedules; (6) Environmental Controls; (7) Material History Records for each lot; (8) Equipment maintenance and calibration records; (9) Process validation procedures and data; (10) Quality audits; (11) Defect analysis and Corrective Action; and (12) Change histories for documents generated by NNI. NNI will promptly provide FHT with copies of correspondence regarding any regulatory actions, including for example 483’s and warning letters.
ARTICLE 4. TERM; TERMINATION
Section 4.1 Duration
(a) This Agreement shall be effective on the Effective Date and, subject to earlier termination as provided in Section 4.2 or extension as provided in Section 4.1(b), shall continue in effect for three years after the Effective Date (the “Term”).
6
Section 4.2 Right to Terminate
The parties may terminate this Agreement for the reasons and as provided in this section.
(a) Default
If a party fails to observe or perform any of its material promises, agreements or undertakings under this Agreement, and fails to remedy any such breach within 90 days of notice to do so from the other party, then the aggrieved party may, upon expiration of the 90-day notice period, give written notice of termination of this Agreement either forthwith or at a future date designated by the aggrieved party. Notwithstanding the foregoing, the non-payment of money when due shall be a material breach of this Agreement if not cured within ten days of notice of the non-payment.
(b) Bankruptcy, Liquidation
If either of the parties shall become voluntarily or involuntarily the subject of proceedings under any bankruptcy or insolvency law, or other law or procedure for the relief of financially distressed debtors, or is unable, or admits in writing its inability, to pay its debts as they mature, or takes or suffers any action for its liquidation or dissolution other than in the context of a merger of consolidation, or has a receiver or liquidator appointed for all or any part of its assets and, in the event any act of the aforesaid character is involuntary, the consequences thereof are not cured within 60 days, the party not affected by such circumstances may give to the affected party written notice of its decision immediately to terminate this Agreement. In the event that such notice is not given for any reason, the affected party shall remain fully responsible for its obligations set forth in this Agreement at the times required.
Section 4.3 Survival
The provisions of Articles 5 and 6 shall survive any termination of this Agreement.
ARTICLE 5. GOVERNING LAW; DISPUTES
Section 5.1 Governing Law
This Agreement shall be governed by the laws of the State of Ohio, without reference to its conflict of laws principles.
Section 5.2 Resolution of Disputes
(a) All disputes arising under this Agreement, or in any way related to the parties’ business relationship, shall first be submitted to mediation in accordance with the then current Mediation Procedure of the CPR Institute for Dispute Resolution. Any statute of limitations defense shall be tolled until resolution of the mediation. If the Parties cannot agree on the selection of a mediator, one shall be selected according to CPR rules. Except as permitted by subsection (b), no party shall institute any lawsuit, arbitration or other formal claim resolution procedure without first submitting the dispute to mediation pursuant to this Section.
7
(b) In the event of a breach, or threatened breach of any provision of this Agreement, that poses a threat of immediate and irreparable harm, a party may seek temporary or preliminary injunctive relief in a court of competent jurisdiction. Following a ruling on any such request for temporary or interim relief, the action will be stayed pending completion of the dispute resolution procedures in this paragraph. Participation in any such preliminary judicial proceedings in no way waives the rights and obligations of this Section.
(c) If mediation is unsuccessful, and the amount in controversy is less than $100,000, the parties shall submit their dispute to binding arbitration pursuant to the then current CPR Rules for Non-Administered Arbitration (“CPR Rules”). The Parties shall select a single arbitrator to resolve the dispute. If the Parties are unable to agree on the selection of an arbitrator within 30 days of the notice of arbitration first being served, the arbitrator shall be selected in accordance with the CPR Rules. To the fullest extent allowed by law, damages shall be limited to compensatory damages, and the arbitrator has no jurisdiction to award damages in excess of compensatory damages, or any amount in excess of a total of $100,000, including any costs awarded pursuant to the CPR Rules. The arbitration shall be governed by the Federal Arbitration Act, 9 U.S.C. §1, et. seq., to the exclusion of any state laws inconsistent therewith. Judgment upon the award may be entered by any court of competent jurisdiction.
(d) If mediation is unsuccessful, and the amount in controversy is $100,000 or more, then the aggrieved party may file suit in any California or Ohio court having jurisdiction. The Parties waive any right to a jury trial. The Parties further waive any right to seek enhanced or punitive damages and will limit their claims to compensatory damages only.
ARTICLE 6. MISCELLANEOUS
Section 6.1 Assignment
This Agreement shall be binding upon and shall inure to the benefit of and be enforceable by the parties hereto and their respective successors and duly permitted assigns. Neither FHT nor NNI may assign their rights and/or obligations under this Agreement other than with the express written consent of the other party, which consent will not be unreasonably withheld. Nothing in this Section 6.1 shall be deemed to prohibit a merger, consolidation or conversion of FHT or NNI or a sale of all or substantially all of the business operations of FHT or NNI as long as the successor to the obligations of FHT or NNI assumes FHT’s or NNI’s, as the case may be, obligations hereunder.
Section 6.2 Waiver
The failure of either party to insist upon strict adherence to any term of this Agreement on any occasion shall not be considered a waiver of any right thereafter to insist upon strict adherence to that term or any other term of this Agreement. Any waiver must be made in writing.
8
Section 6.3 Notices
All notices required by this Agreement shall be in writing and shall be either (a) delivered with signed receipt obtained acknowledging delivery; (b) transmitted by facsimile; or e-mailed to a party at the address set out below (or at such other address as it may have specified):
| If to NNI: | Xxxxxx Xxxxx, Inc. 0000 Xxxxx Xxxx Xxxxx Xxxxxxxx Xxxxxxx, Xxxx 00000 Fax Number: (216) 761 - 0455 Attention: Mr. Xxxxx Xxxxx | |
| With a copy to:
Xxxxx Xxxxx 0000 Xxxxx Xxxx Xxxxx Xxxxxxxx Xxxxxxx, Xxxx 00000 Fax Number: (000) 000-0000 | ||
| If to FHT: | 000 Xxxxxxx Xx. Xxxxxxx Xxxx, Xxxxxxxxxx 00000 Attention: Xxxxxx X. Xxxxxxx | |
| With a copy to: | ||
Section 6.4 Severability
Any provision of this Agreement that is determined by an arbitration panel or a court of competent jurisdiction to be invalid, illegal or unenforceable shall be ineffective to the extent of such invalidity, illegality or unenforceability, without affecting in any way the remaining provisions hereof in such jurisdiction or rendering that or any other provision of this Agreement invalid, illegal or unenforceable, so long as the material purposes of this Agreement can be determined and effectuated. Should any provision of this Agreement be so declared invalid, illegal or unenforceable, the parties shall agree on a valid provision to substitute for it.
Section 6.5 Entire Agreement
This Agreement constitutes the entire agreement between the parties with respect to the subject matter hereof and supersedes any existing agreements between them whether oral or written. In case of a conflict between this Agreement and a purchase order or purchase order confirmation contemplated hereunder, the terms of this Agreement shall govern unless the parties otherwise agree in writing. The terms of this Agreement shall only be amended, modified or supplemented as set forth herein or in writing signed by or on behalf of each party.
9
IN WITNESS WHEREOF, the parties hereto have executed this Agreement to be effective as of the date and year first above written.
| XXXXXX XXXXX, INC. | FOXHOLLOW TECHNOLOGIES, INC. | |||||
| By: | /s/ Xxxxxxxxxxx X. Xxxxx |
By: | /s/ Xxxxxx X. Xxxxxxx | |||
| Name: | Xxxxxxxxxxx X. Xxxxx | Name: | Xxxxxx X. Xxxxxxx | |||
| Title: | Chief Operating Officer | Title: | Senior Vice President of Operations and Research and Development | |||
10
Schedule I-Products
Products
| Product |
Part Number | |
| Peripheral Standard tip w/ plat.housing |
MS05336- | |
| Peripheral Ex. Tip w/ plat. housing |
MS05324- | |
| Housing and tip, ALL Platinum per. PSV |
MS05386- | |
| Plat. Housing w/SS Coil Cor. Cath Ass’y |
MS03426- | |
| ALL Plat, housing Cor. Small vessel |
MS02941- | |
| Unit Purchase Obligation | ||
| During the first 18 months of the initial Term of this Agreement, FHT shall purchase at least the following numbers of each Product: | ||
| Peripheral Standard tip w/ plat.housing |
MS05336- [***] units | |
| Peripheral Ex. Tip w/ plat. housing |
MS05324- [***] units | |
| Housing and tip, ALL Platinum per. PSV |
MS05386- [***] units | |
| Plat. Housing w/SS Coil Cor. Cath Ass’y |
MS03426- [***] units | |
| ALL Plat, housing Cor. Small vessel |
MS02941- [***] units | |
| During the second 18 months of the initial Term of this Agreement (i.e., months 19 through 36), FHT shall purchase at least the following numbers of each Product: | ||
| Peripheral Standard tip w/ plat.housing | MS05336- A number equal to [***] the number of units purchased during the first 18 months of the initial Term. | |
| Peripheral Ex. Tip w/ plat. housing | MS05324- A number equal to [***] the number of units purchased during the first 18 months of the initial Term. | |
| Housing and tip, ALL Platinum per. PSV | MS05386- A number equal to [***] the number of units purchased during the first 18 months of the initial Term. | |
| Plat. Housing w/SS Coil Cor. Cath Ass’y | MS03426- A number equal to [***] the number of units purchased during the first 18 months of the initial Term. | |
| ALL Plat, housing Cor. Small vessel | MS02941- A number equal to [***] the number of units purchased during the first 18 months of the initial Term. | |
| *** | Certain information on this page has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. |
11
FHT may, from time to time, change the part numbers for the Products listed in this Schedule upon 30 days prior written notice to NNI. If the Product bearing the new part number has the same Specification as, and is not materially different than, the Product bearing the prior part number, then all purchases of that Product will be combined for purposes of determining whether FHT has met the Unit Purchase Obligations set forth in this Schedule. If FHT desires to replace an existing Product listed in this Schedule with a new Product that that is materially different from the Product to be replaced, then the parties will negotiate in good faith to establish pricing for that new Product. The Unit Purchase Obligation for the replaced Product will apply to the new Product, and FHT’s purchases of both the replaced Product and the new Product will be combined for purposes of determining whether FHT has met the Unit Purchase Obligations set forth in this Schedule. If, during the first 18 months of the Initial Term, the parties establish a price for the new Product that is less than the price of the replaced Product, then FHT shall pay to NNI liquidated damages in an amount equal to 25% of the difference in per unit prices between the new Product and the replaced Product multiplied by the difference between the actual purchases of the replaced Product and the Unit Purchase Obligation for the first 18 months of the Initial Term. If, during the second 18 months of the Initial Term, the parties establish a price for the new Product that is less than the price of the replaced Product, then FHT shall pay to NNI liquidated damages in an amount equal to 20% of the difference in per unit prices between the new Product and the replaced Product multiplied by the difference between the actual purchases of the replaced Product and the Unit Purchase Obligation for the first 18 months of the Initial Term. The liquidated damages will be paid by dividing the amount of the liquidated damages by the difference between the actual purchases of the replaced Product and the Unit Purchase Obligation for the 18 month period in which the replacement occurs and adding that amount to the price of each unit of the New Product purchased by FHT until such time as the total amount of liquidated damages have been paid. For example, if during the first 18 months, P/N MS05336 changes to a new part number resulting in a price change from [***] to [***] and if FHT has already purchased [***] units of P/N MS05336, then FHT shall be liable for liquidated damages in the amount of [***] ([***] units multiplied by [***] multiplied by 25%). The [***] in liquidated damages would be paid by adding [***] to the per unit cost of [***] until such time as the [***] has been paid in full. If the Initial Term expires prior to FHT purchasing sufficient numbers of the new Product to pay the full amount of the liquidated damages, the unpaid balance shall become immediately due and payable.
| *** | Certain information on this page has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. |
12
Schedule II-Pricing
| Product |
Part Number |
Price Per Unit | |||
| Peripheral Standard tip w/ plat.housing |
MS05336- | $ | [***] | ||
| During the initial Term of this Agreement, the price per unit shall be priced as follows: |
|||||
| For all units purchased in excess of [***] units, but less than [***]: |
$ | [***] | |||
| For all units purchased in excess of [***] units, but less than [***]: |
$ | [***] | |||
| For all units purchased in excess of [***] units, but less than [***]: |
$ | [***] | |||
| For all units purchased in excess of [***] units: |
$ | [***] | |||
| Peripheral Ex. Tip w/ plat. housing | MS05324- | $ | [***] | ||
| During the initial Term of this Agreement, the price per unit shall be priced as follows: |
|||||
| For all units purchased in excess of [***] units, but less than [***]: |
$ | [***] | |||
| For all units purchased in excess of [***] units, but less than [***]: |
$ | [***] | |||
| For all units purchased in excess of [***] units, but less than [***]: |
$ | [***] | |||
| For all units purchased in excess of [***] units: |
$ | [***] | |||
| *** | Certain information on this page has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. |
13
| Housing and tip, ALL Platinum per. PSV |
MS05386- | $ | [***] | ||
| During the initial Term of this Agreement, the price per unit shall be priced as follows: |
|||||
| For all units purchased in excess of [***] units, but less than [***]: |
$ | [***] | |||
| For all units purchased in excess of [***] units, but less than [***]: |
$ | [***] | |||
| For all units purchased in excess of [***] units, but less than [***]: |
$ | [***] | |||
| For all units purchased in excess of [***] units: |
$ | [***] | |||
| Plat. Housing w/SS Coil Cor. Cath Ass’y | MS03426- | $ | [***] | ||
| During the initial Term of this Agreement, the price per unit shall be priced as follows: |
|||||
| For all units purchased in excess of [***] units, but less than [***]: |
$ | [***] | |||
| For all units purchased in excess of [***] units, but less than [***]: |
$ | [***] | |||
| For all units purchased in excess of [***] units, but less than [***]: |
$ | [***] | |||
| For all units purchased in excess of [***] units: |
$ | [***] | |||
| ALL Plat, housing Cor. Small vessel | MS02941- | $ | [***] | ||
| During the initial Term of this Agreement, the price per unit shall be priced as follows: |
|||||
| For all units purchased in excess of [***] units, but less than [***]: |
$ | [***] | |||
| For all units purchased in excess of [***] units, but less than [***]: |
$ | [***] | |||
| For all units purchased in excess of [***] units, but less than [***]: |
$ | [***] | |||
| For all units purchased in excess of [***] units: |
$ | [***] | |||
| *** | Certain information on this page has been omitted and filed separately with the Securities and Exchange Commission. Confidential treatment has been requested with respect to the omitted portions. |
14
Prices do not include freight or other delivery charges, or any applicable sales, excise, use or ad valorem taxes. Prices shall remain firm during the initial Term of this Agreement, provided, however, that if NNI’s raw material costs increase from the raw material costs in effect as of the date of this Agreement, NNI may invoice FHT for the increased raw material costs of all Products sold to FHT pursuant to this Agreement. If NNI’s raw material costs decrease from the raw material costs in effect as of the date of this Agreement, NNI will issue FHT a credit for the decreased raw material costs of all Products sold to FHT pursuant to this Agreement. NNI shall invoice or credit FHT on a quarterly basis for all increased or decreased raw material costs incurred during the previous calendar quarter. FHT shall pay such invoices within 30 days. The parties will attach as Schedule V to this agreement a copy of the most recent pricing for Platinum on the U.S. commodity index.
15
Schedule III – Specifications
| Document Number |
Document Name | |
| LMS 04802 |
Housing with Jacket | |
| LMS 04838 |
Housing with Jacket, Ex-Tip | |
| MPI 03281 |
Tip to Housing Weld, Standard Peripheral | |
| MPI 03710 |
Housing Edge Weld, Standard Peripheral | |
| MPI 04246 |
Tip to Housing Weld, Extended Peripheral | |
| MPI 04916 |
Housing Edge Weld, Extended Peripheral | |
| MPI 04801 |
Laser Welding, Jacket and Housing | |
| MPI 04917 |
Laser Welding, Housing to Jacket Extended | |
| MPI 05353 |
Laser Welding Housing to Tip, LV Peripheral, Mid | |
| LMS 05336 |
Standard Tip and Housing, LV Peripheral, Mid | |
| LMS 05324 |
Extended Tip and Housing, LV Peripheral, Mid |
16
Schedule IV – Examples
[Omitted]
17
Schedule V – Raw Material Pricing as of Execution of Agreement
[Graph Omitted]
18
