AMENDED AND RESTATED
AGREEMENT FOR ALLOCATION OF PATENT COSTS
This Amended and Restated Agreement for Allocation of Patent Costs
(this "Agreement") is entered into as of October 1, 1997 (the "Effective
Date")by and between E. Khashoggi Industries, LLC, a Delaware limited liability
company ("EKI"), and EarthShell Container Corporation, a Delaware corporation
(the "Company").
RECITALS
A. EKI is the owner of certain technology utilizing biodegradable
materials, including starch based additives, for the packaging, portioning and
disposing of food service disposables. EKI is also the owner of technology
related to hydraulically bonded compositions and the methods of using and
manufacturing such compositions.
B. EKI is the successor by merger to the assets and liabilities of
E. Khashoggi Industries, a California general partnership ("EKI Predecessor"),
as well as all rights and obligations of EKI Predecessor under its contractual
agreements. EKI has not yet begun to commercialize its technology (other than
technology licensed to the Company as described below), but expects to do so
following the second anniversary of this Agreement.
C. Pursuant to that certain Amended and Restated License Agreement
dated as of February 28, 1995 (the "License Agreement"), between EKI
Predecessor and the Company, EKI has licensed to the Company the exclusive right
to make, use, sell and otherwise commercialize Food Service Disposables which
incorporate, in whole or in part, the Technology and to utilize the Technology
to make, use, sell and otherwise commercialize ALI-ITE Paper for conversion into
Food Service Disposables (all capitalized terms used herein but not otherwise
defined shall have the meanings ascribed to such terms in the License
Agreement).
D. Pursuant to Section 6(a) of the License Agreement, the Company
has previously agreed to pay, or reimburse EKI for, all costs and expenses
associated with filing, prosecuting, and maintaining patent and patent
applications (both domestic and foreign) directed to (i) compositions (whether
cement-based or non-cement based) capable of use in Food Service Disposables,
(ii) methods of using compositions (whether cement-based or non-cement-based) as
Food Service Disposables, or (iii) methods of manufacturing Food Service
Disposables whether cement-based or non-cement based (collectively, the "Company
Related Patents"), and EKI has agreed to pay all costs and expenses associated
with filing, prosecuting and maintaining patent and patent applications (both
domestic and foreign) not within the scope of the Company Related Patents.
E. The Company and EKI Predecessor have previously entered into that
certain Agreement for Allocation of Patent Costs, dated as of July 31, 1993 (the
"Prior Patent
Allocation Agreement"). The Company is obligated to pay or reimburse EKI for
all costs and expenses associated with filing, prosecuting, and maintaining
patents and patent applications in connection with technology that directly
relates to food and beverage containers, or the process of manufacturing such
containers, within the field of use licensed to the Company, or which has
significant teachings to the manufacture of food and beverage containers, even
if outside such field of use.
F. The Company intends to change its name to "EarthShell
Corporation."
G. EKI and the Company desire to amend and restate the Prior Patent
Allocation Agreement on the terms and conditions stated herein and to cause this
Agreement to supersede the provisions of Section 6(a) of the License Agreement.
AGREEMENT
In consideration of the mutual promises of the parties set forth
herein, and for other good and valuable consideration, the receipt and
sufficiency of which are hereby acknowledged, EKI and the Company hereby agree
as follows:
1. From and after the Effective Date and through the second
anniversary of this Agreement, the Company shall pay, or reimburse EKI if EKI
has made payment in cash, stock or other form of consideration (with all
non-cash consideration being valued at its fair market value at the time of
delivery), all costs, fees and expenses (collectively, "Costs") incurred and
associated with filing, prosecuting, acquiring or maintaining patents or patent
applications (both domestic and foreign) in connection with Technology that
directly relates to the Food Service Disposables licensed to the Company under
the License Agreement (including compositions capable of use in Food Service
Disposables, methods of using compositions as Food Service Disposables and
methods of manufacturing Food Service Disposables), even though there may be
some benefit from such patents or patent applications to EKI. Following the
second anniversary of this Agreement, the Company shall pay or reimburse EKI for
all Costs incurred and associated with filing, prosecuting, acquiring or
maintaining patents or patent applications (both domestic and foreign) in
connection with Technology that directly relates to and primarily benefits the
Food Service Disposables licensed to the Company under the License Agreement
(including compositions capable of use in Food Service Disposables, methods of
using compositions as Food Service Disposables and methods of manufacturing Food
Service Disposables), even though there may be some benefit from such patents or
patent applications to EKI. The phrase "primarily benefits" means that the
Company, as compared to EKI, is more likely to realize a preponderance of the
economic benefits from the filing, prosecution, acquisition or maintenance of
the patent or patent application in question, based on all relevant and material
criteria, including, without limitation, the current and future business plans
and commercialization activities of the Company and EKI, as initially
established by EKI and the Company and as revised biennially. It is
acknowledged by the parties that the term "Costs" includes the reasonable costs,
fees and expenses of the parties' internal legal counsel, if any, that are
directly associated with, or allocable to, filing, acquiring, prosecuting or
maintaining patents or patent applications.
2
2. From and after the Effective Date, EKI shall pay, or reimburse
the Company if the Company has made payment in cash, stock or other form of
consideration (with any non-cash consideration being valued at its fair market
value at the time of delivery), all Costs incurred and associated with filing,
prosecuting, acquiring and maintaining all other patents or patent applications
(both domestic and foreign) not described in Section 1, including those related
to Food Service Disposables, even though there may be some incidental benefits
from such patents or patent applications to the Company.
3. Attached hereto as Exhibit A is a list of those patents and
patent applications as of the Effective Date which, for purposes of this
Agreement, are stipulated to directly relate to Food Service Disposables (and
which are therefore subject to Section 1). Attached hereto as Exhibit B is a
list of those patents and patent applications as of the Effective Date which,
for purposes of this Agreement, are stipulated to not have such a relationship
and which are therefore subject to Section 2. Exhibits A and B shall be revised
biennially by the parties to list the patents and patent applications that are
subject to Sections 1 and 2, respectively, for the ensuing two year period.
4. The parties acknowledge that the allocation of Costs required by
Sections 1 and 2 above may not always be susceptible of precise determination.
The parties will look to their joint or respective outside patent counsel for
the allocation of such Costs pursuant to the terms of this Agreement. In the
event of any disagreement between the parties with respect to the allocation of
such Costs, the disagreement shall be resolved by arbitration in accordance with
Section 15. With regard to the Company, this Agreement shall be administered
and enforced, and any disagreement hereunder resolved, by the members of the
Conflicts Committee of the Company's Board of Directors (who may retain
independent patent counsel to advise them in such matters).
5. Notwithstanding any provision of this Agreement to the contrary,
no party shall have the right to incur any Costs that are reimbursable by the
other party once the first party is notified in writing by the other party that
it does not desire to incur such Costs.
6. Any continuation-in-part, division, revision or replacement
patent or patent application stemming from a patent or patent application listed
on Exhibit A or Exhibit B (as the same may be revised on a biennial basis) shall
be given the same status as the patent or patent application from which it
stems. All Costs for filing, prosecuting, acquiring or maintaining foreign
patents or patent applications shall likewise be allocated in accordance with
this Agreement.
7. Any Costs incurred by EKI or the Company in connection with
filing, prosecuting, acquiring or maintaining patents or patent applications
prior to the Effective Date shall be allocated in accordance with the terms and
provisions of the Prior Patent Allocation Agreement.
8. If any provision of this Agreement is determined by a competent
authority to be illegal or invalid, the provision shall be automatically severed
from this Agreement.
3
Any such holding shall not affect the legality or validity of the remaining
provisions of this Agreement.
9. If any party fails to give notice or enforce any right under this
Agreement, such failure shall not constitute a waiver of the same, unless
reduced to writing and signed by the waiving party. If a party waives its
rights in writing, such waiver shall not constitute a waiver of any other right
or of a subsequent violation of the same right the violation of which had been
previously waived.
10. All notices and other communications provided for or permitted
hereunder shall be given in writing and shall be made by hand-delivery,
first-class mail (registered or certified, return receipt requested),
telecopier, or nationally recognized overnight courier, addressed as follows:
E. Khashoggi Industries, LLC
000 Xxxxxxxxx Xxxxx
Xxxxx Xxxxxxx, Xxxxxxxxxx 00000
Attn: Chief Financial Officer
Facsimile No.: (000) 000-0000
EarthShell Corporation
000 Xxxxxxxxx Xxxxx
Xxxxx Xxxxxxx, Xxxxxxxxxx 00000
Attn: Chief Financial Officer
Facsimile No.: (000) 000-0000
All such notices and communications shall be deemed to have been duly
given: at the time delivered by hand, if personally delivered; five (5)
business days after being deposited in the mail, postage prepaid, if mailed;
when receipt is acknowledged, if telecopied; and the next business day after
timely delivery to the courier, if sent by nationally recognized overnight
courier.
11. This Agreement may be amended only by the consent of each of the
parties expressed in writing, signed by their duly authorized representatives.
12. This Agreement constitutes the entire agreement between the
parties regarding the subject matter hereof, and, except as set forth in
Sections 7 and 13, supersedes all prior discussions or agreements related to the
same, including, without limitation, the Prior Patent Allocation Agreement and
Section 6(a) of the License Agreement. This Agreement shall be governed by and
construed in accordance with the laws of the State of California, without
reference to the conflicts of law principles thereof.
13. In the event that any previously incurred Costs are determined to
have been improperly classified (whether pursuant to this Agreement, the Prior
Patent Allocation Agreement or Section 6(a) of the License Agreement), the
relevant party shall promptly reimburse the other party hereto for such Costs,
with interest computed at the prime rate, as published in the Wall Street
Journal (the "Prime Rate") as adjusted at the end of each fiscal quarter, from
the date
4
the improperly classified payment was made (or demand for payment was made)
until the date of repayment. Such reimbursement shall be the sole remedy for
such improper classification.
14. Any amount reimbursable to a party hereunder is due upon
submission of an invoice with appropriate supporting documentation, which
invoice shall be submitted within ten days after the end of each calendar month
(although the failure to timely submit such invoice shall not bar the party from
receiving reimbursement for any costs reimbursable hereunder). Any invoiced
amounts not paid within 30 days following the date the invoice is submitted
shall bear interest at the Prime Rate, adjusted at the end of each fiscal
quarter, from the date the invoice is submitted. Under no circumstance shall
EKI or the Company be obligated to incur any Costs on behalf of the other party
if such other party is in material default with respect to the payment of any
amounts due hereunder.
15. Arbitration Clause.
a. Any controversy, claim or dispute arising out of or relating
to this Agreement or the breach, termination, enforcement, interpretation or
validity thereof, including the determination of the scope or applicability of
this agreement to arbitrate ("Dispute"), shall be determined by arbitration in
Santa Barbara, California, in accordance with the laws of the State of
California for agreements made in and to be performed in California. The
arbitration shall be administered by the American Arbitration Association
("AAA") pursuant to its Commercial Rules and Supplementary Procedures for Large,
Complex Disputes.
b. Within fifteen days after the commencement of the
arbitration, an arbitrator shall be selected by the parties (or if they fail to
agree, by the AAA) from the AAA's Intellectual Property Panel of Arbitrators.
The arbitrator shall be neutral and independent and shall comply with the AAA
Code of Ethics for Arbitrators in Commercial Disputes (Canons I - VI).
c. The award rendered by the arbitrator shall be final and
shall not be subject to vacation or modification. The arbitrator shall render
any award or otherwise conclude the arbitration no later than 120 days after the
date the arbitrator is selected. Judgment on the award made by the arbitrator
may be entered in any court having jurisdiction over the parties.
d. Either party may, without inconsistency with this Agreement,
seek from a court any interim or provisional relief that is necessary to protect
the rights or property of that party, pending the appointment of the arbitrator.
The exclusive forum for such application shall be the Los Angeles Superior Court
or the United States District Court for the Central District of California.
e. Upon the request of any party, a non-binding mediation shall
be conducted prior to the arbitration pursuant to the Mediation Rules of the
AAA.
f. The arbitrator shall have no authority to make any ruling,
finding, or award that does not conform to the terms and conditions of this
Agreement. By way of
5
example, the arbitrator shall have no authority to award punitive, special,
consequential or exemplary damages or any other damages that conflict with
Section 13.
g. The award of the arbitrator shall be in writing and shall
specify the factual and legal basis for the award. The arbitrator shall, in the
award, allocate all of the costs of the arbitration (and the mediation, if
applicable), including the fees of the arbitrator and the reasonable attorneys'
fees of the prevailing party, against the party who did not prevail.
16. No party may assign, pledge, or otherwise transfer this Agreement
or any right or obligation hereunder without the prior written consent of the
other party; provided, however, that either party shall be permitted to assign,
without the consent of the other party, all, but not less than all, of its
rights, duties and obligations under this Agreement in connection with the sale
or disposition of its entire or substantially its entire business, whether by
merger, consolidation, sale of stock, sale of all or substantially all of its
assets or otherwise. This Agreement shall bind the successors and assigns of
the parties.
IN WITNESS WHEREOF, EKI and the Company have executed this Agreement
as of the day first set forth above.
E. KHASHOGGI INDUSTRIES, LLC
By: /s/ Xxxx Xxxxx
------------------------------------
Xxxx Xxxxx,
Manager and Chief Financial Officer
EARTHSHELL CONTAINER
CORPORATION, a Delaware corporation
By: /s/ Xxxxx Xxxxxxx
------------------------------------
Xxxxx Xxxxxxx,
Chief Financial Officer
6
EXHIBIT A
PATENTS AND APPLICATIONS "DIRECTLY RELATED" TO ECC TECHNOLOGY
I. ISSUED U.S. PATENTS.
Patent Number Docket Number Short Title
------------- ------------- -----------
4,921,250 11527.223 Xxxxx Methods
5,108,677 11527.223.1 Xxxxx Containers
5,356,579 11527.19.1 Powder Compaction Methods--Removable Agg
5,358,676 11527.10.2 Powder Compaction Methods
5,385,764 11527.51.1 Hydraulically Settable Food or Xxx Containers
5,453,310 11527.55 Cementitious Packaging Containers
5,506,046 11527.149 Inorganically Filled Articles from Sheets
5,508,072 11527.137 Inorganically Filled Sheets
5,514,430 11527.51.2 Coated Hydr Settable Food or Xxx Containers
5,543,186 11527.96 Sealable Hydraulically Settable Containers
5,545,450 11527.148 Inorganically Filled Articles
5,549,859 11527.63 Methods of Extruding Hydr Settable Materials
5,569,514 11527.223.2 Xxxxx Methods (II)
5,580,409 11527.106 Method of Making Hydr Settable Articles-Sheets
5,580,624 11527.56.1 Noncementitious Food or Beverage Containers
5,582,670 11527.146 Method of Making Inorganically Filled Sheets
5,614,307 11527.98.1 Coated Hydraulically Settable Sheets
5,618,341 11527.201 Fiber Dispersion Methods
5,626,954 11527.98 Hydraulically Settable Sheets
5,631,052 11527.55.2 Coated Cementitious Packaging Containers
5,631,053 11527.110.1 Hinged Inorganically Filled Articles
5,635,292 11527.19.2 Powder Compaction Articles--Removable Agg
5,637,412 11527.10.4 Powder Compaction Articles
5,641,584 11527.50.2 Foamed Cementitious Insulation
5,654,048 11527.55.3 Cementitious Packaging Containers (II)
5,658,603 11527.167.2 Systems for Molding Inorganically Filled Art
5,658,624 11527.63.1 Extruded Hydraulically Settable Articles
5,660,900 11527.176 Starch-Bound Inorganically Filled Articles
5,660,903 11527.137.2 Inorganically Filled Sheets (II)
5,660,904 11527.146.2 Inorganically Filled Sheets (III)
5,662,731 11527.209 Fiber-Filled Starch-Based Compositions
5,665,439 11527.107 Hydraulically Settable Articles from Sheets
5,665,442 11527.137.1 Laminated Inorganically Filled Sheets
5,676,905 11527.78 Method of Molding Hydr Settable Articles
5,679,145 11527.216 Fiber-Filled Starch-Based Compositions (II)
5,679,381 11527.106.1 System for Making Hydr Settable Sheet Articles
5,691,014 11527.148.1 Coated Inorganically Filled Articles
1
II. ALLOWED U.S. APPLICATIONS.
Docket Number Short Title
------------- -----------
11527.51.3 Hydraulically Settable Food and Beverage Containers (II)
11527.56.2 Noncementitious Food and Beverage Containers--Methods
11527.56.3 Coated Noncementitious Food or Beverage Containers
11527.77 Wet Sheet Molding Methods for Hydraulically Settable Materials
11527.86.1 Method of Making Hydraulically Settable Sheets
11527.96.2 Coated Sealable Hydraulically Settable Containers
11527.110 Inorganically Filled Hinges
11527.110.2 Method of Making Inorganically Filled Hinges
11527.136 Laminated Inorganically Filled Sheets
11527.148.2 Inorganically Filled Articles (II)
11527.149.1 Laminated Inorganically Filled Sheet Articles
11527.149.2 Inorganically Filled Articles from Sheets (II)
11527.154.1 Inorganically Filled Articles from Sheets (III)
11527.167.1 Inorganically Filled Articles (III)
11527.210 Method of Making Fiber-Reinforced Starch-Bound Articles
11527.239 Sealable Inorganically Filled Containers
11527.242 High Starch Sheets
11527.247 Glycerin Treatment of Starch-Based Articles
11527.248 Special Hinge Structure in Starch-Bound Articles
11527.251 Mold Apparatus for Making Hinge Structure
III. PENDING U.S. APPLICATIONS
Docket Number Short Title
------------- -----------
11527.78.2 Method of Molding Hydraulically Settable Articles (II)
11527.146.1 Systems for Making Inorganically Filled Sheets
11527.146.3 Methods for Making Inorganically Filled Sheets (II)
11527.154 Method of Making Inorganically Filled Articles From Sheets
11527.147 Method of Molding Inorganically Filled Articles
11527.176.1 Starch-Based Compositions
11527.196 Method for Making Starch-Bound Inorganically Filled Articles
11527.243 Method of Making High Starch Sheets
11527.249 Method for Manufacturing Hinged Starch-Bound Articles
2
IV. FOREIGN PATENTS AND APPLICATIONS.
Group Docket No. Short Group Title
---------------- -----------------
11527.63x Extrusion of Hydraulically Settable Materials
11527.141x Hydraulically Settable Food and Beverage Containers
11527.155x Inorganically Filled Sheets and Articles (I)
11527.162x Inorganically Filled and Hydraulically Settable Articles
11527.165x Inorganically Filled Sheets and Articles (II)
11527.221.1x Dispersion of Cellulose Fibers-Gasland
11527.228x Inorganically Filled Starch-Bound Articles and Methods
11527.234x Fiber Reinforced Foamed Starch Articles and Methods
11527.239x Sealable Inorganically Filled Containers
11527.242x High Starch Sheets and Compositions
11527.243x Method of Making High Starch Sheets
11527.249x Hinged Starch-Bound Articles and Methods
3
EXHIBIT B
PATENTS AND APPLICATIONS NOT "DIRECTLY RELATED" IN ECC TECHNOLOGY
1. ISSUED U.S. PATENTS.
Patent Number Docket Number Short Title
------------- ------------- -----------
4,225,247 11527.159 Mixing and Agitating Device
4,225,357 11527.156 Pervious Concrete Product
4,302,127 11527.157 Applicator and Distributor Assembly
4,398,842 11527.158 Sandwich Pervious Concrete Product
4,552,463 11527.23 Apparatus for Colloidal Mixture
4,889,428 11527.147 Rotary Mill
4,944,595 11527.1 Cement Building Material (II)
4,946,504 11527.11 Cement Building Material (III)
5,061,319 11527.34 Cement Building Material
5,100,586 11527.25 Hazardous Waste Containers
5,169,566 11527.26 Cementitious Containment Barriers
5,232,496 11527.1.1 Improved Building Material
5,505,987 11527.29.2 Thin-Bonded Overlay
5,527,387 11527.41.2 Design Optimized Concrete
5,545,297 11527.94 Filament Winding Methods
5,631,097 11527.113.1 Laminate Insulation with Cementitious Sheet
5,695,811 11527.105 Thin-Bonded Overlay (II)
II. ALLOWED U.S. APPLICATIONS.
Docket Number Short Title
------------- -----------
11527.94.1 Filament Wound Hydraulically Settable Articles
11527.200 Aggregates and Fibers Treated with Ettringite
III. PENDING U.S. APPLICATIONS.
[None]
IV. FOREIGN PATENTS AND APPLICATIONS.
Group Docket No. Short Group Title
---------------- -----------------
11527.1x Apparatus for Cement Building Material
11527.11x Cement Building Material
11527.23x Apparatus for Colloidal Mixture
11527.34x Process for Cement Building Material
11527.178x Design Optimized Concrete
11527.235x Filament Winding Methods
1
