[Confidential Treatment Requested]
SALES AND PURCHASE AGREEMENT
This Sales and Purchase Agreement (the "Agreement") is made and entered
into effective as of the 10th day of January, 1997 (the "Effective Date") by
and between Hybrid Networks, Inc., a Delaware corporation, having its
principal place of business at 00000 Xxxx Xxxx, Xxxxxxxxx, Xxxxxxxxxx
00000-0000, U.S.A. ("Hybrid"), and Itochu Corporation, a Japanese
corporation, having its principal place of business at 0-0, Xxxx-Xxxxxx
0-xxxxx, Xxxxxx-xx, Xxxxx 000-00, Xxxxx ("Itochu"), with reference to the
following facts and recitals:
WHEREAS, Hybrid and Itochu have entered into that certain Collaboration
Agreement on the 25th day of November, 1996 (the "Collaboration Agreement"),
among themselves and Sharp Corporation, a Japanese corporation, having its
principal place of business at 00-00 Xxxxxxx-Xxx, Xxxxx-xx, Xxxxx 000, Xxxxx
("Sharp") concerning the cable modems referred to therein as the "New Cable
Modems" and referred to herein as the "Cable Modems"; the Cable Modems are
the products designated by Hybrid as Models Nos. N-201, N-201S, N-202,
N-202S, N-201B, and N-201SB (Sharp reference Nos. A1Ci2010H, A1Ci201SH,
A1Ci2020H, A1Ci202SH, A1Ci2010B, and A1Ci201SB respectively), which are more
specifically described in Annex A hereto, and the specifications of which are
set forth in Annex B hereto;
WHEREAS, Hybrid wishes to purchase a certain number of Cable Modems
manufactured by Sharp as described in Section 2 of the Collaboration Agreement;
WHEREAS, Itochu wishes to act as the exporter to Hybrid as foreseen in the
Collaboration Agreement;
WHEREAS, this Agreement constitutes the OEM supply agreement provided for
in the Collaboration Agreement and sets forth the obligations of the parties
with respect thereto;
WHEREAS, Hybrid and Itochu (collectively, the "Parties" and each
individually, the "Party") wish to set the terms and conditions covering the
sales and purchase of the Cable Modems.
NOW, THEREFORE, in consideration of the foregoing premises and the mutual
covenants herein contained and for other good and valuable consideration, the
adequacy and receipt of which are hereby acknowledged, the Parties hereby agree
as follows:
1. Terms for Purchase of Cable Modems
1.1.1 Minimum Initial Purchase Order: The initial purchase order (the
"Minimum
1
[**Confidential Treatment has been requested with respect to certain portions
of this exhibit. Confidential portions have been omitted from the public
filing and filed separately with the Securities and Exchange Commission].
Initial Purchase Order") to be issued by Hybrid to Itochu shall be for a
minimum of [**] mass production units of Cable Modems manufactured by
Sharp, subject to the terms and conditions set forth herein. The Minimum
Initial Purchase Order shall include a detailed breakdown of models for the
initial [**] units to be delivered in April , 1997 (delivery terms being
based on FOB Japan), subject to the completion in time of the design and
software for the Cable Modems by Hybrid and by Sharp, with the remaining
[**] units to be delivered over a period of one year, but no later than the
end of March , 1998. The Minimum Initial Purchase Order shall be irrevocable
and non-cancelable. The scheduling of shipment releases for the [**] units
shall be in accordance with Section 1.2 below. The price for the units to be
delivered pursuant to the Minimum Initial Purchase Order shall be determined
in accordance with Section 1.3 below. The Cable Modem warranty shall be in
accordance with Section 1.4 below. Production tooling costs shall be
amortized in accordance with Section 1.5 below.
1.1.2 Further Purchase Orders: Purchase orders beyond the Minimum
Initial Purchase Order described in Section 1.1.1 shall be irrevocable and non-
cancelable, and shall be separately discussed and agreed to between Hybrid and
Itochu, and shall be based on the terms and conditions of this Agreement.
1.2 Production Quantities and Schedules: Subject to the provisions of
this Section 1.2, the schedule for shipment release quantities for [**] units
covered by the Minimum Initial Purchase Order and for all units to be ordered
and shipped thereafter shall be determined by Hybrid, as set forth in written
forecasts that Hybrid will provide to Itochu by the 25th day of each month, and
confirmed by Itochu, covering the number of units by model that Hybrid expects
to purchase hereunder during the six-month period commencing with the month
immediately following the month in which such forecast is given. With respect
to each such forecast;
(a) The amounts set forth for the period covered by the first three
months of the forecast will constitute firm shipment release orders by
Hybrid for such Cable Modems; Itochu shall cause Sharp to manufacture such
Cable Modems in accordance herewith and deliver them to Itochu, and Itochu
shall ship such Cable Modems on or before the last day of the applicable
month;
(b) The amounts set forth for the period covered by the last three
months of the forecast will not constitute firm shipment release orders.
The shipment of the amounts forecasted for those months may be rescheduled
by Hybrid with Itochu's consent which will not be unreasonably withheld,
except that;
(i) Hybrid will pay Itochu on or before the last day of the fourth
month of period covered by the such forecast for all components
purchased by Sharp and required for Sharp's manufacture of the Cable
Modems listed in such forecast for such month.
2
(ii) Hybrid will pay Itochu on or before the last day of the fifth month
of period covered by the such forecast for all DES chips purchased by
Sharp and required for Sharp's manufacture of the Cable Modems listed in
such forecast for such month.
(c) For example, the forecast issued by Hybrid on March 25, 1997 will
constitute Hybrid's and Itochu's firm commitment for the complete Cable
Modems listed for shipment at the end of April, May, and June, 1997, will
constitute Hybrid's firm commitment with respect to component procurement
for the Cable Modems listed for shipment at the end of July, 1997, and will
constitute Hybrid's firm commitment with respect to DES chip procurement
for the Cable Modems listed for shipment at the end of August 1997.
Notwithstanding the foregoing, the production schedule shall be
determined in a way that, to the extent practicable, assures Sharp a constant
allocation of monthly production quantity, the capacity of which is set at
[**] units per month at present. It is also understood that the components
procurement lead-time for Sharp is four (4) months for the DES chip and three
(3) months for the remaining items. The lead-time of the manufactured Cable
Modems on an ex-Japan basis is one month additional to the components
lead-time. Notwithstanding the foregoing, no orders will be shipped in
February or March 1997, the number of units ordered in January 1997 (in the
Minimum Initial Purchase Order) for shipment in April will not exceed [**]
and Itochu will ship all those units by the end of April 1997 and will ship
by the end of May 1997 all units that Hybrid orders in February 1997
(provided that the number ordered in February 1997 for shipment in May 1997
does not exceed the number estimated for May 1997 in the January 1997
forecast.)
1.3 Cable Modem Purchase Price: The Cable Modem purchase price (the
"Purchase Price") per unit on the basis of Delivered, Duty Paid, to Hybrid's
designated warehouse in California, U.S.A., for the initial [**] Minimum
Initial Purchase Order shall be as follows, on the basis of the Specifications
as of the Effective Date as described in Section 2.1 hereof:
------------------------------------------------------------------------------
Model Sharp Ref. (A) Shipment 9704-9707 (B) Shipment 9708-onwards
------------------------------------------------------------------------------
N-201 AlCi2010H US$ [**] US$ [**]
------------------------------------------------------------------------------
N-201S A1Ci201SH US$ [**] US$ [**]
------------------------------------------------------------------------------
N-202 A1Ci2020H US$ [**] US$ [**]
------------------------------------------------------------------------------
N-202S A1Ci202SH US$ [**] US$ [**]
------------------------------------------------------------------------------
The above prices are based on transport between Japan and the U.S. West Coast by
sea shipment. In case the transport by air is required, the additional cost
will be added to the above prices.
------------------------------------------------------------------------------
The prices in the column (A) apply to Cable Modems, whose shipment schedule is
fixed during a period from April '97 through July '97 on the basis of ex-Japan.
------------------------------------------------------------------------------
3
------------------------------------------------------------------------------
The prices in the column (B) apply to Cable Modems, whose shipment schedule is
fixed during a period from August '97 through March '98 on the basis of ex-
Japan.
------------------------------------------------------------------------------
Itochu represents to Hybrid that Itochu and Sharp shall continue to seek
ways to reduce the cost of manufacturing the Cable Modems and shall reduce the
Purchase Price for the Cable Modems hereunder as and when such cost reductions
are achieved. Itochu undertakes to report to Hybrid by the end of each calendar
quarter the specific actions that Sharp or Itochu has taken or proposes to take
to reduce the cost of the Cable Modems and the amounts of such reductions, and
Hybrid and Itochu agree to negotiate in good faith the reduction in Purchase
Price as a result thereof.
1.4 Cable Modem Warranty: The warranty of the Cable Modems shall be
governed by the Warranty Agreement concluded among Hybrid, Sharp, and Itochu,
and whose copy is attached to this Agreement as Annex G.
1.5 Tooling Costs: The tooling costs for the Cable Modem as identified as
of the Effective Date for the production capacity as required by the Minimum
Initial Purchase Order of [**] units are US$ [**]. These tooling costs
shall be straight-line amortized over the quantity of [**] units and are
included in the Purchase Price of the Cable Modems. Upon amortization of these
tooling costs, the tooling will become the property of Hybrid. Any un-amortized
tooling costs shall be due and payable by Hybrid, should the total production
and shipment quantity not reach the [**] units by the end of the term of this
Agreement, as specified in Section 8.1 hereof.
The tooling cost amount of US$ [**] is calculated on the basis of the
monthly production capacity of [**] units. When a higher capacity is required
to fulfill the eventual demand of Hybrid, additional tooling cost will be
required. Itochu will provide Hybrid with detailed information as to such cost,
and such cost will be amortized in a similar manner to that described above.
Should there arise additional tooling costs which are not identified as of
the Effective Date, due to such further development as a new version or a new
model of the Cable Modem, such tooling costs and their authorization method
shall be agreed separately but within the framework of this Agreement among the
Parties.
2. Specifications of Cable Modems
2.1 Cable Modem Specifications: The specifications of the Cable Modem
("Specifications") as agreed among Hybrid, Sharp and Itochu provided for in
Section 2.2 will
4
be described in Annex B which will be attached hereto in accordance with
Section 2.2. Itochu shall cause Sharp to manufacture Cable Modem in
compliance with the Specifications in Annex B attached hereto. Any
modifications thereto shall be subject to the agreement among all Parties as
described in Section 2.2 hereof.
2.2 Hybrid Deliverables: As soon as reasonably practicable after June 30,
1997, Hybrid shall deliver to Itochu the Specifications in such specificity as
required for the designing and manufacturing of Cable Modem to the reasonable
satisfaction to Itochu. The Specifications shall be subject to change from time
to time as Hybrid modifies the design of the Cable Modem, provided however, that
the revised Specifications shall be mutually agreed upon with consequential
modifications in the price, delivery, and other commercial terms, with such
approval not to be unreasonably withheld. With each material release of revised
Specifications, Hybrid shall deliver to Itochu copies of the revised
Specifications pertaining to the design and manufacture of the Cable Modem. The
Specifications shall be considered as Hybrid's "Confidential Information"
subject to the provisions of Section 10 below.
3. Currency / Delivery / Taxes / Payment
3.1 U.S. Dollars: All payments required to be made hereunder shall be made in
U.S. Dollar Currency.
3.2 Delivery: The delivery shall be deemed to be executed on the basis of FOB
Japan according to the INCOTERMS 1993 and the updated versions thereof, and the
title and risk of the Cable Modem shall pass from Itochu to Hybrid at the point
of the delivery on the condition that the payment for the Cable Modem will have
been fully made by the time of the delivery. In case the physical delivery on
the basis of FOB Japan precedes the full payment to Itochu by Hybrid of the
Cable Modem, the title to the Cable Modem shall be retained by Itochu until such
time that the payment is made in full by Hybrid to Itochu.
3.3 Purchase and Sale of Cable Modems: The purchase price includes all duties,
customs and similar charges and fees, at the tariff as of the Effective Date of
this Agreement, and are exclusive of all sales, use, excise and similar taxes
imposed by any state or local governmental authority within the United States.
Hybrid shall pay all such excluded and applicable taxes in the U.S., including
but not limited to sales, value added, or other taxes applicable to the purchase
and sale of the Cable Modems. In the event that the rate of import duties,
customs and similar charges and fees for importing the Cable Modems into the
United States is increased after the Effective Date, or another or additional
similar such tax or duty is imposed after the Effective Date, and if the amount
of any such increase or new tax exceeds one percent (1%) of the purchase price,
an adjustment shall be made to the purchase price to reflect the actual direct
amount of such increase or other or additional tax or duty, upon thirty (30)
days
5
written notice to Hybrid. The current duties, customs and similar such taxes
are set forth in Annex C attached hereto.
3.4 Payment: Hybrid shall pay the Purchase Price provided for hereunder for
the Cable Modems that have been manufactured by Sharp and shipped by Itochu
in accordance with this Agreement. The payment by Hybrid to Itochu shall be
made by an irrevocable letter of credit (the "Letter of Credit") payable at
sight as provided below. The Letter of Credit shall be issued by a first
class bank acceptable to Itochu, in form and substance acceptable to Itochu,
and, for any purchase order by Hybrid hereunder, shall be established in
favor of Itochu at or before the beginning of one (1) week prior to the
ex-Japan scheduled shipment as described in the purchase order. The Purchase
Price for Cable Modems covered by purchase orders which Hybrid has placed
with Itochu shall become due and payable on the relevant shipment date set
forth in each such purchase order. The validity of the Letter of Credit shall
fully cover the agreed ex-Japan shipment schedule and any reschedule, and the
validity period for presentation of the documents to a bank in Japan shall be
fifteen (15) days from the date of each shipment. The Letter of Credit shall
be negotiable at a bank in Japan, upon presentation by Itochu of at sight
draft covering 100% of the purchase price for the Cable Modems sold and
shipped pursuant to the relevant purchase order, with three (3) copies of
commercial invoice, three (3) copies of packing list, and two-thirds (2/3)
set of clean "On Board" Multimodal Transport Bills of Lading. Partial
shipments shall be allowed, and transshipments shall be allowed. Itochu will
negotiate in good faith any other payment method that Hybrid might reasonably
propose in the future, provided that payment to Itochu is adequately secured
thereby.
4. Manufacturing
4.1 Quality Standards: Itochu shall ensure that the Cable Modems manufactured
by Sharp meets at a minimum, the established quality standards of Sharp and the
quality standards set forth in Annex D hereto. Itochu shall cause Sharp to
produce working samples of Cable Modems for initial testing by Sharp and Hybrid
and based upon the conclusions of such tests, to produce new samples for field
tests. These Cable Modems will be accepted or rejected according to criteria to
be developed by Hybrid and Sharp jointly. The Parties assume for the purposes
of this Agreement that the sample Cable Modems will be finally accepted by
Hybrid and Sharp before the end of March , 1997. In order to confirm that the
given Cable Modems so manufactured hereunder meet the quality standards pursuant
hereto, Itochu shall cause Hybrid to be given access, with a reasonable prior
written notice to Itochu, to inspect the manufacturing facilities where such
units of Cable Modems are produced, at any time during normal business hours;
provided that (i) Hybrid shall undertake and cause its employees or
representatives who have access to the manufacturing facilities to undertake and
be bound by the confidentiality obligations as per Section 10 of this Agreement
and the Non-Disclosure Agreement in place between Hybrid and Sharp, whose copy
is shown in Annex E attached
6
hereto, and (ii) such inspection shall not disturb or otherwise jeopardize
the development and/or production schedule of Cable Modems nor of other
products of Sharp. The representatives shall have the right to select at
random for examination one or more assemblies, subassemblies and/or
components of each Cable Modem from different production batches. In
addition to the foregoing, the Cable Modems manufactured by Sharp hereunder
will be subject to inspection and acceptance or rejection by Hybrid under
such other procedures as Hybrid may reasonably request and which are agreed
by Sharp and Itochu. Such agreement will not be unreasonably withheld, and
will specify the relevant lot(s) of production to which such other inspection
procedures will apply.. Hybrid shall be entitled to reject the delivery of
any Cable Modems which do not conform to the quality standards, by providing
Itochu with a written report containing reason(s) for rejection, whereupon
Itochu shall, at its own expense, furnish sufficient proof to Hybrid that
such units have been brought into compliance herewith.
4.2 Packaging: Itochu shall cause the Cable Modems purchased by Hybrid
hereunder to be shipped in appropriate packaging reasonably approved by Hybrid.
Such packaging may accommodate ten or a few tens of Cable Modem units with AC
adapters (i.e. separate packages for individual units will not be required.)
4.3 Third Party Cable Modems: Itochu represents to Hybrid that neither Itochu
nor Sharp will manufacture or have manufactured client cable modems that
incorporate or are based on any proprietary information of a technological or
other nature of Hybrid provided to Itochu or Sharp in connection with this
Agreement, the Collaboration Agreement or the Joint Development Agreement
between Hybrid and Sharp pursuant to which the Cable Modems are developed.
Hybrid acknowledges that Sharp or its subsidiaries may manufacture client cable
modems for third parties. Itochu represents to Hybrid that such manufacture for
third parties will not incorporate or be based upon any such Hybrid proprietary
information and will be performed in a way that the confidentiality as described
in section 10 of this Agreement is strictly maintained.
5. Marking
Itochu shall cause Sharp to place on the Cable Modems to be sold by Itochu to
Hybrid hereunder the name "Hybrid" or other Hybrid specified marks. All Cable
Modems to be sold hereunder shall also include a marking as to the country of
origin and such other labeling that Hybrid may reasonably request. Itochu shall
submit to Hybrid, for Hybrid's approval and prior to use of such notice or
marks, drafts of labels showing such notice and marks. Such approval shall not
be unreasonably withheld. If applicable as determined by Hybrid, Itochu agrees
to affix to the exterior or the interior of each Cable Modem and the package
containing such Cable Modem a legible notice reading "Licensed by Hybrid
Networks, Inc. under one or more of the following Patents," followed by a list
of applicable patent numbers taken from the list of Hybrid's patents or as may
otherwise be instructed by Hybrid.
7
6. Disclaimer
6.1 Hybrid expressly disclaims all warranties, express or implied, including
but not limited to the implied warranties of merchantability, fitness for a
particular purpose, regarding the Cable Modem specifications, the Cable Modem
technology, and the Cable Modem system.
6.2 Except for the Cable Modem warranty described in Section 1.4 above, Itochu
shall not be responsible to Hybrid for any other warranties, express or implied,
including but not limited to the implied warranties of merchantability, fitness
for a particular purpose, regarding the Cable Modem, the Cable Modem design, and
the Cable Modem design documentation.
7. Limitation of Liability
In no event shall either Party be liable to the other for special, indirect,
incidental or consequential damages (including without limitation, loss of
profits), regardless of whether such liability arises in contract, tort, strict
liability in tort, breach of warranty, indemnification or otherwise, even if
such Party was or should have been aware or advised of the possibility thereof.
8. Term and Termination
8.1 Term: The term of this Agreement shall commence upon the Effective Date
and, unless otherwise terminated in accordance with Section 8.2, shall continue
in full force until December 31, 1999.
8.2 Termination: Either Party shall have the right to forthwith terminate the
Agreement and individual sales and purchase contract by giving the other party a
written notice of termination in the event of any of the followings:
(a) The other Party breaches any of the provisions hereof (such Party being
hereinafter referred to as the "Breaching Party") and fails to rectify such
breach within thirty (30) days after receipt of a written notice to that
effect.
(b) The other Party becomes insolvent or takes bankruptcy or other similar
proceedings, voluntarily or involuntarily, or makes an assignment for the
benefit of creditors or makes a composition with its creditors or passes a
resolution for its dissolution or liquidation.
In the event of occurrence of any of the events stipulated in subparagraph (a)
or (b) of the above on the part of Hybrid, then upon written notice from Itochu
to Hybrid, any outstanding
8
balance of the contract price and overdue interest, if any, payable to Itochu
shall become immediately due and payable without presentation, demand or
additional notice to Hybrid.
The right to terminate the Agreement and an individual contract under this
section shall not preclude the terminating Party from seeking recovery of
damages suffered by such Party due to the breach of the Agreement by the other
Party.
8.3 Hybrid's Remedies on Termination: Without limiting any other remedies
available to Hybrid, including the right to direct damages proven, in the event
of any termination of this Agreement by Hybrid by reason of a material breach by
Itochu, unless otherwise notified by Hybrid in writing, Itochu shall immediately
return to Hybrid all of Hybrid's Confidential Information (defined in Section
10) provided by Hybrid, including any copies or updates thereof.
8.4 Itochu's Remedies on Termination: Without limiting any other remedies
available to Itochu, including the right to direct damages proven, in the event
of termination of this Agreement by Itochu by reason of a material breach by
Hybrid, unless otherwise notified by Itochu in writing, Hybrid shall immediately
return to Itochu all of Itochu's Confidential Information (defined in Section
10) provided by Itochu, including any copies or updates thereof.
9. Export Compliance
9.1 The Parties shall comply with all applicable U.S. and Japanese export laws
and regulations, including but not limited to the U.S. Export Administration
Regulations ("EAR"), and the Japanese Export Control Law, as such laws and
regulations may be amended from time to time. Each Party hereby gives its
assurance to the other Party that it will not export or re-export or otherwise
disclose, directly or indirectly, the Cable Modem technology, technical
documentation or design documentation, or any other "technical data" received
from the other Party, nor allow the direct product thereof to be shipped
directly or indirectly to Cuba, Iran, Iraq, Libya, North Korea, Sudan, or Syria
or such other country the U.S. department of Commerce or the Japanese Ministry
of International Trade and Industry shall designate from time to time as
proscribed destinations.
Each Party hereby acknowledges that the Cable Modem technology is subject to the
EAR and Export Control Law, that Each Party's duty to provide the other Party
the Cable Modems or the technical documentation pertaining to the Cable Modem
technology shall be expressly conditioned upon the availability of appropriate
export licenses if any are required from the U.S. Department of Commerce or the
Japanese Ministry of International Trade and Industry.
9
9.2 Itochu will be responsible for seeking UL/TUV/BSI safety approval and FCC
approval (Part 15/68), and Hybrid will pay $56,400.00 to Itochu for obtaining
such approval.
9.3 If at any time during the term of this Agreement, any approval with respect
to this Agreement, or the performance, registration or recording thereof, shall
be required by the government or any subdivision of the government of Japan or
the countries or areas where the Cable Modem is manufactured, to make this
Agreement effective or to comply with any exchange control or other legal
requirement, Itochu, at its expense, shall take all further actions and execute
all documents necessary or appropriate for the fulfillment of such requirements
and shall promptly provide Hybrid with written evidence of such compliance.
10. Confidentiality
Each Party acknowledges that the provisions of this Agreement constitute
confidential or proprietary information of the other Party (collectively
hereinafter referred to as "Confidential Information"). All Confidential
Information disclosed by a Party (the "Disclosing Party") is also protected
hereunder as Confidential Information provided that:
(1) If in writing or other tangible form, the information is conspicuously
labeled by the Disclosing Party as proprietary, confidential, company private
or some marking similar in nature at the time of delivery; and
(2) If oral, the information shall be identified by the Disclosing Party as
proprietary and confidential within fifteen (15) business days of its
disclosure, by a writing or other tangible form which identifies such oral
communication as Confidential Information.
The Party who receives Confidential Information (the "Receiving Party") shall
not duplicate, use or disclose to any third party, including but not limited to
any independent contractor, consultant, or supplier, any Confidential
Information (except as permitted under any applicable license agreement or in
the Joint Development Agreement). If either Party desires to hire a contractor
or consultant to perform any services relating to the Cable Modems, such
contractor or consultant shall enter into a confidentiality agreement containing
terms equivalent to those of this Section. The Receiving Party who receives
Confidential Information shall adopt reasonable precautions to protect such
Confidential Information and to prevent its dissemination to unauthorized
persons or entities.
It is expressly acknowledged that Hybrid and Sharp already have entered into a
Non-Disclosure Agreement and that the Joint Development Agreement provides for
the treatment of confidential information provided by either Hybrid or Sharp
pursuant to the development of the Cable Modems.
10
The Receiving Party's obligation under this Section shall not apply to any
information which the Receiving Party can demonstrate:
(a) is wholly and independently developed by the Receiving Party without
the use of or access to any Confidential Information; or
(b) is or has become generally available to the public without breach of
this Agreement by the Receiving Party; or
(c) is rightfully received from a third party free of restriction, as
evidenced by documentation in the Receiving Party's possession; or is not
treated as confidential by the Disclosing Party.
11. Arbitration
11.1 Good Faith Resolution: Prior to requesting that any claim or controversy
be arbitrated, the Parties shall attempt to resolve between themselves any
dispute, controversy, or difference concerning the meaning, application,
performance, breach of this Agreement. If such negotiations have not reached
final settlement within thirty (30) days, either Party may pursue arbitration as
provided for below.
11.2 Arbitration: Any controversy, claim or dispute in respect of the
construction of the Agreement, or arising out of, or relating in any manner to
the provisions of the Agreement or the breach thereof, shall be finally settled
by arbitration under the Rules of the American Arbitration Association. The
language of any arbitration will be English, and any such arbitration shall be
held in San Francisco, California, and shall be governed by the laws of the
State of California, U.S.A. A court reporter shall record any arbitration
proceeding, and such reporter's record shall be the official transcript of the
proceeding. The award and decision resulting from the arbitration shall be
conclusive, non-appealable, and binding on the Parties and their respective
successors and permitted assignees.
12. Relationship of the Parties
The relationship of the Parties under this Agreement shall be and at all times
remains one of independent contractors. Neither Hybrid nor Itochu shall have
any authority to bind the other in any respect, and neither Hybrid nor Itochu
shall act as, or be considered as, an agent of the other. Neither Party nor any
agent, employee, officer, representative or independent contractor of or
retained by either Party shall become or be deemed an employee, partner, joint
venture or
11
agent of or with the other Party by reason of this Agreement.
13. Licenses
As provided in the Collaboration Agreement, licenses shall be granted by Hybrid
to Sharp for the Hybrid technology and by Sharp to Hybrid for any Sharp
technology incorporated in the Cable Modems pursuant to the Joint Development
Agreement between Hybrid and Sharp under which the Cable Modems were developed.
14. General Provisions
14.1 Force Majeure: Delay and/or failure in performance, other than the
obligation to pay money, shall not be deemed a breach of this Agreement when
such failure or delay is caused by or due to causes beyond reasonable control of
Hybrid or Itochu, including but not limited to; fire, flood, accidents,
strikes, explosions, acts of God and acts of local, state and/or
federal/national governments (including without limitation failure to obtain or
delays in obtaining the approvals referred to in Section 9) or acts of war.
Should a delay occur, the Party claiming force majeure shall notify the other,
in writing, specifying the nature and possible duration of the delay. Any such
delays shall not be deemed a breach of or failure to perform this Agreement or
any part thereof and the date on which a Party's obligations hereunder are due
to be fulfilled shall be extended for a period equal to the time lost as result
of such delays.
14.2 Assignment: This Agreement, and the rights and obligations under this
Agreement, shall not be transferred, assigned or encumbered, in whole or in
part, by either of the Parties without the prior written consent of the other,
which consent shall not be unreasonably withheld. Subject to the restrictions
against assignment set forth in this Section 14.2, this Agreement shall inure to
the benefit of, and shall be binding upon, the successors and assigns of each of
the Parties.
14.3 Severability: The illegality, unenforceability or invalidity of any one or
more covenants, phrases, clauses, sentences or paragraphs of this Agreement,
shall not affect the remaining portions of this Agreement, or any part thereof;
and in case of any such illegality, unenforceability or invalidity, this
Agreement shall be construed as if such illegal, unenforceable or invalid
covenants, phrases, clauses, sentences or paragraphs, had not been inserted.
14.4 Headings: The headings and titles of the paragraphs of this Agreement are
inserted solely for convenience of reference and are not a part of and are not
intended to govern, limit or aid in the construction of any term or provision
hereof.
12
14.5 Counterparts: This Agreement may be executed in any number of identical
counterparts, each of which shall be deemed to be an original, and all of which
together shall be deemed to be one and the same instrument when each Party has
signed one such counterpart.
14.6 Entire Agreement: This Agreement constitutes the entire agreement between
the Parties and supersedes all prior agreements and understandings, oral and
written, between the Parties hereto with respect to the subject matter hereof
and the transactions contemplated hereby. No modification, variation or
amendment of this Agreement shall be effective without the written consent of
all of the Parties to this Agreement at the time of such modification, variation
or amendment.
14.7 Notice: All notices, requests, demands and other communications required
or permitted to be given under this Agreement shall be in writing and shall be
sent to the Party to whom the notice is to be given, by telex, e-mail, or
facsimile, and confirmed by first class mail, postage prepaid, and properly
addressed as follows (in which case such notice shall be deemed to have been
duly given on the day the notice is first received by the Party):
Hybrid Networks, Inc. Itochu Corporation
00000 Xxxx Xxxx 0-0, Xxxx-Xxxxxx 2-chome
Xxxxxxxxx, XX 00000-0000 Xxxxxx-xx, Xxxxx 000-00
X.X.X. Xxxxx
Attn: Xxxx Xxxxxxxxx Attn: Xxxxxx Xxxxxx
Chief Executive Officer General Manager, TOKKX
Telecommunication Systems Dept.
Tel. No.: x0.000.000.0000 Tel. No. x00.0.0000.0000
Fax. No.: x0.000.000.0000 Fax. No.: x00.0.0000.0000
e-mail: xxxxx@xxxxxx.xxx e-mail: xxxxxx.xxxxxx@xxxxx.xxxxxx.xx.xx
14.8 Waiver: Failure by either Party hereto to enforce at any time any term or
condition under this Agreement shall not be a waiver of that Party's right
thereafter to enforce each and every term and condition of this Agreement.
14.9 Necessary Acts: Each Party to this Agreement agrees to perform any further
acts and to execute and deliver any further documents that may be reasonably
necessary to carry out the provisions of this Agreement and the transactions
contemplated thereby.
13
14.10 Survivability: The terms and conditions contained herein that by their
sense and context are intended to survive the termination or expiration of
this Agreement (specifically, without limitation, Sections 1.4 Cable Modem
Warranty, 6. Disclaimer, 7. Limitation of Liability, 8.3 Hybrid's Remedies on
Termination or 8.4 Itochu's Remedies on Termination as applicable, 9. Export
Compliance, 10. Confidentiality, 11. Arbitration, 12. Relationships of the
Parties, and 14. General Provisions) shall so survive the termination or
expiration of this Agreement.
14.11 Publicity and Disclosure: All notices to third parties and all other
publicity concerning the transactions contemplated by this Agreement shall be
jointly planned and coordinated by and between the Parties hereto.
14.12 Limitation on Actions: No action, regardless of form, arising out of
or relating to this Agreement, may be brought by either Party more than two
(2) years after the cause of action has accrued. A cause of action shall be
considered to have accrued when the injured Party discovers, or in the
exercise of due diligence should have discovered, a default or breach of this
Agreement.
IN WITNESS WHEREOF, the Parties have caused this Agreement to be duly executed
as of the date first above written.
Hybrid Networks, Inc. Itochu Corporation
By: By:
---------------------------------- ------------------------------
Print: Xxxx X. Xxxxxxxxx Print:
---------------------------- ---------------------------
Title: Chairman, President & CEO Title:
---------------------------- ---------------------------
14
---------------------------------------------------------------------------
Annex A List of Models - Cable Modems
---------------------------------------------------------------------------
Annex B Technical Specifications of Cable Modems
---------------------------------------------------------------------------
Annex C Current Duties, Customs and Similar Taxes
---------------------------------------------------------------------------
Annex D Quality Standards Agreement (Hybrid/Sharp/Itochu)
---------------------------------------------------------------------------
Annex E Non-Disclosure Agreement (Hybrid/Sharp)
---------------------------------------------------------------------------
Annex F Agreement on Proprietary Rights Warranty and Indemnification
(Hybrid/Sharp/Itochu)
---------------------------------------------------------------------------
Annex G Agreement on Products Warranty (Hybrid/Sharp/Itochu)
---------------------------------------------------------------------------
15
ANNEX A
LIST OF MODELS - CABLE MODEMS
N201: SH3 processor based, modem with a 2MHz, 64 QAM downstream; and RS232
interface for an external telephone modem return
N201S: SH3 processor based, modem with a 2MHz, 64 QAM downstream; RS232
interface for an external telephone return; and downstream DES
encryption
N202X: SH3 processor based, modem with a 2MHz, 64 QAM downstream; and
internal V.32 telephone modem ready
N202XS: SH3 processor based, modem with a 2MHz, 64 QAM downstream; internal
V.32 telephone modem ready; and downstream DES encryption
N201E: SH3 processor based, multi-user modem with a 2MHz, 64 QAM downstream;
RS232 interface for an external telephone modem return; enhanced
memory; diplexor tuner and QPSK transmitter circuit interface
N201ES: SH3 processor based, multi-user modem with a 2MHz, 64 QAM downstream;
RS232 interface for an external telephone modem return; enhanced
memory; diplexor tuner and QPSK transmitter circuit interface and
downstream DES encryption
N202E: SH3 processor based, modem with a 2MHz, 64 QAM downstream; internal
V.32 telephone modem; enhanced memory; diplexor tuner; QPSK
transmitter circuit interface
N202ES: SH3 processor based, multi-user modem with a 2MHz, 64 QAM downstream;
internal V.32 telephone modem; return; enhanced memory; diplexor
tuner; QPSK transmitter circuit interface and downstream DES
encryption
N231: SH3 processor based, multi-user modem with a 2MHz, 64 QAM downstream;
internal QPSK cable return; and RS232 interface for an external
telephone modem return
N231S SH3 processor based, multi-user modem with a 2MHz, 64 QAM downstream;
internal QPSK cable return; RS232 interface for an external telephone
modem return; and downstream DES encryption
Final 6/13/97
ANNEX B
-------------------------------------------------------------------------------
PREPARED BY: DATE: SPEC NO. EU-97203 Rev1.6
--------------------------
SHARP FILE NO.
/s/ X. Xxxxx 11 June 1997 --------------------------
-------------------------- ISSUE 11 JUNE 1997
CHECKED BY: DATE: ELECTRONIC COMPONENTS --------------------------
GROUP PAGE 9
/s/ X. Xxxx 11 June 1997 SHARP CORPORATION --------------------------
------------------------ REPRESENTATIVE DIVISION
APPROVED BY: DATE: /X/ ELECTRONIC COMPONENTS DIV.
/ / OPTICAL DEVICE DIV.
/ / PHOTO VOLTAICS DIV.
SPECIFICATION
/s/ X. Xxxx 11 June 1997
-------------------------------------------------------------------------------
[** Confidential Treatment has been requested
with respect to certain handwritten portions on
this page. Confidential portions have been
omitted from the public filing and filed
separately with the Securities and Exchange
Commission.]
-------------------------------
DEVICE SPECIFICATION FOR
Cable modem
N-201(A1CI2010H)
Model No. N-202X(A1CI202XH)
-------------------------------
/ / CUSTOMER'S APPROVAL
DATE 6/13/97
-------------------------------------
BY /s/ Xxxxxxxxx Xxxx
-------------------------------------
Xxxxxxxxx Xxxx
Hybrid Networks
-------------------------------------
/ / CUSTOMER'S APPROVAL PRESENTED
BY
DATE 6/13/97 /s/ Katsuhiro Miichi
------------------------------------- ----------------------------
BY /s/ Xxx Xxxxxxxxxx KATSUHIRO MIICHI
-------------------------------------
ENGINEERING DEPARTMENT 2
ELECTRONIC COMPONENTS DIVISION
ELECTRONIC COMPONENTS (ELECOM) GROUP
Xxx Xxxxxxxxxx
Itochu Corp.
-------------------------------------------------------------------------------
SHARP CONFIDENTIAL AND PROPRIETARY
[The next 59 pages, comprising the remainder of this Annex B have been omitted
as the Company is seeking confidential treatment for such information.
Confidential portions have been filed separately with the Securities and
Exchange Commission].**
ANNEX C
DUTIES AND CUSTOMS' FEES AND TAXES
1. Import Duty
Non-DES Version Cable Modem
3.3% (Heading or code no. of Non DES Version Cable
Modem in HARMONIZED TARIFF SCHEDULE of the
United States (1997) IS 8517.50.1000)
DES Version Cable Modem
Unknown (Heading or code no. Of DES Version Cable
Modem in HARMONIZED TARIFF SCHEDULE of the
United States 91997) is to be advised later)
2. Harbor Maintenance Fee
0.125%
3. Merchandise Processing Fee
0.21%
ANNEX D
-------------------------------------------------------------------------------
PREPARED BY: Date: Spec No. QBMN018
Aug. 06, 1997 --------------------------
SHARP File No.
/s/ X. Xxxxxxxx --------------------------
-------------------------- Issued: August 06, 1997
APPROVED BY: Date: ELECTRONIC --------------------------
Aug. 06, 1997 COMPONENTS GROUP Page: 1/4
/s/ H. Nazaki SHARP CORPORATION --------------------------
-------------------------- Applicable Division
/ / Electronic Components Div.
SPECIFICATION / / Photovoltaics Div.
/ / Opti-electronic Device Div.
-------------------------------------------------------------------------------
---------------------------------------
OUTGOING INSPECTION STANDARDS
FOR CABLE MODEM
Model No.: N-201/N-202X
---------------------------------------
/ / CUSTOMER'S APPROVAL
DATE 8/12/97
----------------------------
BY /s/ Xxxxxx Xxxx PRESENTED
---------------------------- BY
/s/ X. Xxxxxxxx
------------------------------------------ --------------------------
/ / CUSTOMER'S APPROVAL X. Xxxxxxxx, General Manager
Electronic Components Div.
DATE 8/12/97 Elecom Group
--------------------------- Sharp Corporation
BY /s/ Xxx Xxxxxxxxxx
---------------------------
Xxx Xxxxxxxxxx
Itochu Corp.
-------------------------------------------------------------------------------
2
[The next 16 pages, comprising the remainder of this Annex D have been omitted
as the Company is seeking confidential treatment for such information.
Confidential portions have been filed separately with the Securities and
Exchange Commission].**
ANNEX E
NON-DISCLOSURE AGREEMENT
This Agreement made and entered into this 10th day of July, 1996
("Effective Date"), by and between SHARP CORPORATION, a Japanese corporation,
having its principal place of business at 00-00, Xxxxxxx-xxx, Xxxxx-xx, Xxxxx,
Xxxxx (hereinafter called "Sharp") and Hybrid Networks, Inc., an American
corporation, having its principal place of business at 00000 Xxxx Xxxx,
Xxxxxxxxx, Xxxxxxxxxx 00000-0000 (hereinafter called "Hybrid Networks").
WITNESSETH:
WHEREAS, Sharp and Hybrid Networks both have as their purpose an interest
in exploring a possible business relationship and in order for the parties to
explore this relationship, it may be necessary for the parties to disclose
certain of their proprietary and other information to each other, which
information each of the parties regards as confidential. This confidential
information relates to Cable Data Modem.
NOW, THEREFORE, the parties hereto agree as follows:
1. (a) All of the confidential information (hereinafter
"Confidential Information"), including, without limitation,
all information relating to business plans, financial or
technical matters, trade secrets, designs, know-how,
inventions, operations and any other information received or
acquired by one party ("Receiving Party") from the other
("Disclosing Party") in the course of exploring the possible
business relationship shall be in written form and marked
"Confidential," with the name of the Disclosing Party and
the date of disclosure. If the Confidential Information is
initially disclosed orally, it shall be reduced to written
form by the Disclosing Party (including the date of the oral
disclosure and name of the Disclosing Party) and presented
or mailed to the Receiving Party within fifteen (15) days of
the first oral disclosure.
(b) The Confidential Information shall remain the property of
the Disclosing Party.
(c) All information disclosed which is not marked
"Confidential," or not reduced to written form and marked
"Confidential" if initially disclosed orally shall be
considered to be non-confidential and shall not be subject
to the obligations imposed by this Agreement. All
Confidential Information disclosed under this Agreement
shall be limited to the subject matter mentioned in the
Recital. The existence and terms of this Agreement shall be
treated as Confidential Information.
1
2. The Receiving Party shall:
(a) hold the Confidential Information in confidence and not
disclose it to third parties, except in the limited cases
referred to in paragraph "6"; and
(b) not use the Confidential Information for any purpose other
than exploring or examining the possibility of a business
relationship between the parties.
3. Either party hereto shall have the right, at any time, to
terminate in writing and discussions and exchange of information
in connection with the exploration of the possibilities of a
business relationship between the parties without any further
obligations or liabilities to the other party, other than the
obligations of confidentiality hereunder, or any right or
obligation relating to the Confidential Information hereunder.
4.(i) The obligations of the above paragraph "2" shall not apply
to any information which:
(a) is available to the public through no breach of this
Agreement by the Receiving Party; or
(b) was in the possession of the Receiving Party prior to
receipt from the Disclosing Party; or
(c) is received independently from a third party who is free to
disclose such information to the Receiving Party; or
(d) is subsequently independently developed by the Receiving
Party; or
(e) has been or is made public by the Disclosing Party, such as
by commercial use or sale or by publications or patents, or
otherwise; or
(f) is approved for release by written consent of the Disclosing
Party.
(ii) Disclosure of Confidential Information shall not be
precluded if such disclosure is pursuant to the requirement
or request of a governmental agency or by operation of law.
Provided, however, the Receiving Party shall promptly give a
written notice to the Disclosing party so that the
Disclosing Party may seek an appropriate protective order.
5. All Confidential Information delivered to and/or in the
possession of the Receiving Party shall be returned or delivered
to the Disclosing Party, with all copies made thereof, in
whatever form, if the Disclosing Party so requests.
6. The Receiving Party agrees that the Confidential Information
shall be disclosed to only those people within its respective
organizations or its agents, consultants, representatives or
advisors who have a need to know the information
2
and who are obligated under terms no less restrictive than those
imposed by this Agreement on the Receiving Party.
7. Each party shall have the right to refuse to accept any
information under this Agreement, and nothing herein shall
obligate either party to disclose to the other party any
particular information. Further, each party acknowledges that no
contract or agreement providing for a business relationship, of
any nature, shall be deemed to exist unless and until a final
definitive agreement has been executed and delivered.
8. If any official approval is required by a government authority or
disclose the Confidential Information hereunder, such disclosure
is subject to that approval. Both parties shall comply in all
respects with applicable laws, regulations and court orders,
including but not limited to laws and regulations on export
control, in both parties' countries and other applicable
countries.
9. Disclosure of any information under this Agreement, or otherwise,
shall not be construed as granting, directly or by implication,
any license under or interest of any kind in any patent, patent
application, copyright or other intellectual property rights.
10. The Disclosing Party represents and warrants that it has the
right to disclose the information disclosed under the terms of
this Agreement and that disclosure of this information does not
conflict with the terms of any agreement between the Disclosing
Party and a third party.
11. The parties hereto shall not be obligated to compensate each
other for the disclosure and/or use pursuant to the terms of this
Agreement of any information exchanged in connection with this
Agreement or the discussions between the parties.
12. This Agreement supersedes all prior agreements, understandings,
representations and statements, whether oral or written, between
the parties relating to the disclosure of the Confidential
Information. The terms of this Agreement may not be changed
except by subsequent written agreement duly signed by an officer
of each of the parties.
13. Subject to Paragraph "4" hereof, the obligation of the Receiving
Party provided in Paragraph "2" hereof shall continue for three
(3) years from the date of each receipt of the Confidential
Information, even after termination of this Agreement according
to paragraph "3" hereof.
14. This Agreement shall be governed, construed and interpreted in
accordance with the laws of Japan.
15. The Receiving Party acknowledges that remedies of damages may be
inadequate to protect against breach of this Agreement and the
Receiving Party agrees in
3
advance to the granting of injunctive or other equitable relief
to the Disclosing Party in addition to any other remedy which may
be available to the Disclosing Party.
16. The Disclosing Party does not make any representation or
warranty, except as may be specifically provided in writing, as
to the accuracy or completeness of the Confidential Information,
or as to its utility or suitability for any purpose of the
Receiving Party and the Disclosing Party expressly disclaims any
right of the Receiving Party to rely thereon, or any liability to
the Receiving Party resulting from the use of the Confidential
Information.
IN WITNESS WHEREOF, the parties by their duly authorized representatives
have executed this Agreement as of the Effective Date first set forth above.
HYBRID NETWORKS, INC. SHARP CORPORATION
By: /s/ Xxxx X. Xxxxxxxxx By: /s/ Akira Mitarai
---------------------------- -----------------------------
Typed Name: Xxxx X. Xxxxxxxxx Typed Name: Akira Mitarai
-------------------- --------------------
Title: President & CFO Title: Corporate Director
------------------------- -------------------------
Date: 10 July, 1996 Date: 10 July 1996
------------------------- -------------------------
4
Annex F
AGREEMENT ON
PROPRIETARY RIGHTS AND INDEMNIFICATION
THIS AGREEMENT (the "Agreement") is made and entered into effective as
of the 10th day of January, 1997 (the "Effective Date") by and among Hybrid
Networks, Inc., a Delaware corporation, having its principal place of
business at 00000 Xxxx Xxxx, Xxxxxxxxx, Xxxxxxxxxx 00000-0000, U.S.A.
("Hybrid"), Sharp Corporation, a Japanese corporation, having its principal
place of business at 00-00 Xxxxxxx-Xxx, Xxxxx-xx, Xxxxx 000, Xxxxx ("Sharp"),
and Itochu Corporation, a Japanese corporation, having its principal place of
business at 0-0, Xxxx-Xxxxxx 0-xxxxx, Xxxxxx-xx, Xxxxx 000-00, Xxxxx
("Itochu"), (hereinafter referred to collectively as "Parties" and each
individually as "Party") with reference to the following facts and recitals:
RECITALS
WHEREAS, Hybrid, Sharp, and Itochu have entered into Collaboration
Agreement on the 25th day of November, 1996 Collaboration Agreement" concerning
the collaboration among the Parties on the Cable Modem defined in the
Collaboration Agreement, including but not limited to development,
manufacturing, licensing, sales and marketing, and have entered into or are
entering into development, purchase and sales and licensing agreements pursuant
thereto,
WHEREAS, the Parties hereby recognize that the Cable Modem is of a highly
technical nature based on advanced technologies as developed by the individual
or collective efforts of the Parties and third parties,
WHEREAS, the Parties wish to clarify the position of each Party
concerning the proprietary nature of the technologies so involved in the Cable
Modem,
NOW, THEREFORE, in consideration of the foregoing premises and the mutual
covenants herein contained and for other good and valuable consideration,
adequacy and receipt of which are hereby acknowledged, the Parties hereby agree
as follows:
1. Hybrid Proprietary Rights Warranty: Hybrid hereby warrants to Sharp
and Itochu that, to its knowledge as of the date of the Effective Date, there
is no substantial or unavoidable claim, legal action or other proceeding
pending or threatened against Hybrid raised by any third party, alleging that
the Cable Modem technology or Cable Modem specification provided by Hybrid,
which is the subject of the Collaboration Agreement infringes or will
infringe any third party's patent(s), copyright(s) or any other intellectual
property right(s). Hybrid's sole and exclusive obligation to indemnify and
defend as a result of any infringement, claim or
1
Annex F
proceeding shall be set forth in Section 2.
2. Hybrid Indemnification: If Hybrid breaches its proprietary rights
warranty set forth in Section 1 above, and if any such claim, suit or proceeding
arising therefrom is brought against Sharp or Itochu, then upon request by Sharp
or Itochu, Hybrid shall, at its expense, select counsel of Hybrid's choice and
settle or defend any such claim, suit or proceeding arising therefrom and pay
all damages, settlements (provided that such settlements are agreed to by
Hybrid) and costs awarded therein to a third party against Sharp, Itochu and
their subcontractors. In addition, if Hybrid desires to attempt to reduce its
liability hereunder, Hybrid may (i) substitute a comparable non-infringing Cable
Modem technology or Cable Modem specification, (ii) modify the Cable Modem
technology or Cable Modem specification to make it non-infringing, or (iii)
obtain a right for Sharp and Itochu to continue the use of the Cable Modem
technology or Cable Modem specification to develop, manufacture, license, sell
or market the Cable Modem, all at the expense of Hybrid. Notwithstanding the
above, the said indemnification shall not apply to claims resulting from
modifications to the Cable Modem technology or Cable Modem specification by any
Party other than Hybrid or to combinations with other products not supplied by
Hybrid or to specifications provided by Sharp or Itochu. The foregoing sets
forth Hybrid's entire indemnification obligation.
3. Sharp Proprietary Rights Warranty: Sharp hereby warrants to Hybrid and
Itochu that, to its knowledge as of the date of the Effective Date, there is no
substantial or unavoidable claim, legal action or other proceeding pending or
threatened against or affecting Sharp raised by any third party, alleging that
the Cable Modem technology or Cable Modem specification provided by Sharp, which
is the subject of the Collaboration Agreement infringes or will infringe any
third party's patent(s), copyright(s) or any other intellectual property
right(s). Sharp's sole and exclusive obligation to indemnify and defend as a
result of any infringement, claim or proceeding shall be set forth in Section 4.
4. Sharp Indemnification: If Sharp breaches its proprietary rights warranty
set forth in Section 3 above, and if any such claim, suit or proceeding arising
therefrom is brought against Hybrid or Itochu, then upon request by Hybrid or
Itochu, Sharp shall, at its expense, select counsel of Sharp's choice and settle
or defend any such claim, suit or proceeding arising therefrom and pay all
damages, settlements (provided that such settlements are agreed to by Hybrid)
and costs awarded therein to a third party against Hybrid, Itochu and their
subcontractors. In addition, if Sharp desires to attempt to reduce its
liability hereunder, Sharp may (i) substitute a comparable non-infringing Cable
Modem technology or Cable Modem specification, (ii) modify the Cable Modem
technology or Cable Modem specification to make it non-infringing, or (iii)
obtain a right for Hybrid and Itochu to continue the use of the Cable Modem
technology or Cable Modem specification to develop, manufacture, license, sell
or market the Cable Modem, all at the expense of Sharp. Notwithstanding the
above, the said indemnification shall not apply to claims resulting from
modifications to the Cable Modem technology or Cable Modem specification by any
Party other than Sharp or to combinations
2
Annex F
with other products not supplied by Sharp or to specifications provided by
Hybrid or Itochu. The foregoing sets forth Sharp's entire indemnification
obligation.
5. Disclaimer
All Parties expressly disclaim all warranties except for that provided herein,
express or implied, including but not limited to the implied warranties of
merchantability, fitness for a particular purpose, regarding the Cable Modem
specification, the Cable Modem technology, and the Cable Modem system, which are
the subject of the Collaboration Agreement.
IN WITNESS WHEREOF, the Parties have caused this Agreement to be duly executed
as of the date first above written.
Hybrid Networks Inc. Sharp Corporation
By: By:
-------------------------------- ------------------------------
Print: Xxxx X. Xxxxxxxxx Print:
---------------------------- ------------------------
Title: Chairman, President & CEO Title:
---------------------------- --------------------------
Itochu Corporation
By:
-------------------------------
Print:
----------------------------
Title:
----------------------------
3
Annex G
WARRANTY AGREEMENT
This Warranty Agreement (the "Agreement") is made and entered into
effective as of the 10th day of January, 1997 (the "Effective Date") by and
between Hybrid Networks, Inc., a Delaware corporation having its principal
place of business at 00000 Xxxx Xxxx, Xxxxxxxxx, Xxxxxxxxxx 00000-0000,
U.S.A. ("Hybrid"), Sharp Corporation, a Japanese corporation, having its
principal place of business at 00-00 Xxxxxxx-xxx, Xxxxx-xx, Xxxxx 000, Xxxxx
("Sharp"), and Itochu Corporation, a Japanese corporation, having its
principal place of business at 0-0, Xxxx-Xxxxxx 0-xxxxx, Xxxxxx-xx, Xxxxx
000-00, Xxxxx ("Itochu"), hereinafter referred to as "Parties" collectively
and as "Party" individually, with reference to the following facts and
recitals:
RECITALS:
WHEREAS, Hybrid and Itochu have entered into that certain Sales and
Purchase Agreement on the 10th day of January, 1997 (the "HybIto S&P
Agreement") concerning the sales and purchase of the cable modems, and
WHEREAS, Sharp and Itochu have entered into that certain Sales and Purchase
Agreement on the _____ day of ________, 1997 (the "SharpIto S&P Agreement")
concerning the sales and purchase of the cable modems,
WHEREAS, the Parties wish to set the terms and conditions covering the
warranty of the cable modems whose supply is defined in the two agreements,
HybIto S&P Agreement and SharpIto S&P Agreement,
NOW, THEREFORE, in consideration of the foregoing premises and the mutual
covenants herein contained and for other good and valuable consideration, the
adequacy and receipt of which are hereby acknowledged, the Parties hereby agree
as follows:
1. Scope of Application
This Agreement covers the warranty as provided by Sharp on the cable modems
which are supplied under the SharpIto S&P Agreement and/or the HybIto S&P
Agreement; more specifically the cable modems with Hybrid's denominations
(Sharp's denominations) of N-201 (A1Ci2010H), N-201S (A1Ci201SH), N-202
(A1Ci2020H), N-202S (A1Ci202SH), N-201B (A1Ci2010B), and N-201SB (A1Ci201SB),
hereinafter referred to as "Product" individually and "Products" collectively.
When cable modems of different denominations than above enter into the scope of
the SharpIto S&P Agreement and HybIto S&P Agreement, such cable modems will also
be covered by this Agreement.
2. Quality Standards, Testing and Inspection Methods
2.1 The quality standards of the Products, as well as the testing and
inspection methods shall be governed by the related documents as separately
agreed among the Parties to this Agreement, namely "Device Specification for
Cable Xxxxx Xxxxx Xx. X-000 (X0XX0000X) / N-202X (A1CI202XH)" and "Outgoing
Inspection Standards for Cable Xxxxx Xxxxx Xx. X-000 / X-000X" (hereinafter,
"Quality Standards" and "Testing and Inspection Methods" respectively, each of
which may be subject to
1
revisions and additions based on agreements among the Parties to this
Agreement).
2.2 Sharp's obligations to Hybrid under this agreement are independent and are
not affected by the terms (or performance) of any agreement between Itochu and
Sharp.
3. Delivery
3.1. Sharp warrants to Itochu, and Itochu warrants to Hybrid, that the Products
satisfy the requirements of the Quality Standards, which may be subject to
revisions and additions based on agreements among the Parties to this Agreement.
3.2. The delivery is deemed to be done on the basis of ex-godown Itochu's
warehouse between Sharp and Itochu, and on the basis of FOB Japan between Hybrid
and Itochu, at each of which points the title and risk of the Products are
deemed to have passed from Sharp to Itochu and from Itochu to Hybrid
respectively. Nevertheless, Hybrid and Itochu individually reserve the right to
reject the delivery of the Products in case they fail the Quality Standards by
the incoming inspection performed according to the Testing and Inspection
Methods. Such rejection must be informed by Hybrid to Itochu within 45 days of
the FOB Japan delivery, and by Itochu to Sharp within 60 days of the ex-godown
delivery. The Products so rejected shall be repaired or replaced by Sharp upon
notification of failure by Hybrid or Itochu. Upon such rejection, Sharp
reserves the right to contest the rejection judgment by Hybrid, in which case
the Parties to this Agreement shall enter without unreasonable delay into
consultation as to the settlement of such rejection.
4. After-Sales Service
4.1. The After-Sales Service of the Products shall be performed by Hybrid under
its responsibility and cost, except for the cases as provided hereafter in
Sections 6 and 7 of this Agreement.
4.2. When Hybrid and/or Itochu requires the documentation for the preparation of
Service Manuals and/or the Spare Parts List, Sharp shall comply with such
request to the best of its ability. The content as well as the sharing of the
cost of such documentation shall be agreed separately among the Parties.
5. Supply of Service Parts
5.1. As regards the Service Parts which are procured originally by Sharp for the
manufacturing of the Products, they will be delivered (FOB Japan) to Hybrid from
Sharp and Itochu at cost within hundred (100) days upon receipt of such Service
Parts Order by Sharp. Such order of Service Parts shall consist of the integer
multiples of the Order-Unit Quantity as described in Annex 1 of this Agreement,
and the price of each Service Part shall be based on the Service Parts List, as
provided by Sharp to Itochu and by Itochu to Hybrid.
5.2. The period of last time buy of the Service Parts shall be for a period of
one (1) year after the last delivery of the Products as regards the supply of
individual parts, and shall be on or before the last delivery of the
corresponding Product.
However, the Service Parts in the form of Printed Circuit Board Assembly shall
be ordered latest by the time of the purchase order for the last delivery lot of
the corresponding Product, and shall cover the total
2
quantity as required to cover the lifetime of the corresponding Product.
In case Sharp experiences difficulty in further supply of any of the Service
Parts earlier than the period as stated above, Sharp shall notify the other
Parties of such eventuality giving them a period of at least three (3) months to
consider the last bulk order of such Service Parts, which order shall be duly
respected by Sharp.
6. Warranty Period
6.1. For a period within sixteen (16) months of the manufacturing of the
Product, which date shall be identified by the serial number or other methods
attached to the Product by Sharp, if the Product fails in quality and
performance due to defects attributable to Sharp, Hybrid shall repair such
Product and Sharp shall refund Hybrid the cost of the repair work and of the
Service Parts consumed in such repair. The refund of the Service Parts shall
cover the electrical and mechanical parts, but shall exclude the Printed Circuit
Board Assembly, except for the cases in which the Printed Circuit Board itself
is defective by manufacture.
For the purpose of executing this clause, the cost of the repair work is fixed
and agreed as US$50.00 for each case of repair, and the cost of the Service
Parts consumed shall be based on the Service Parts List as provided by Sharp and
Itochu to Hybrid.
6.2. In case Hybrid requires the refund by Sharp, Hybrid shall inform Itochu and
Sharp without unreasonable delay the details of the failure and repair. Sharp
reserves the right, upon review of such details of the failure and repair, to
contest such requirement for refund, in which case the Parties to this Agreement
shall enter without unreasonable delay into consultation as to the attribution
of the defects and as to the settlement of the refund.
6.3. This section for the execution of the Warranty by Sharp shall be reviewed
by the Parties to this Agreement as to its actual application rules within six
(6) months of the Effective Date of this Agreement.
7. Epidemic Failure
7.1. In case epidemic failure takes place in the market due to defects clearly
attributable to Sharp, Hybrid shall inform Itochu and Sharp without unreasonable
delay of such facts, and Sharp shall repair or replace the affected Products at
its own cost. Such repair cost shall include the transportation cost between
Hybrid and Sharp. In the event of the epidemic failure, all Parties agree to
discuss to establish the economic and reasonable countermeasures for the prompt
resolving of the situation.
7.2. Epidemic Failure shall be defined by the following criteria.
a. That the failure is within three (3) years of the manufacturing of the
Product.
b. That the symptom of the failures is the same and is due to the defect
of the same part or material, and the ratio of the failures satisfies the
following criterion:
(Aggregate Failed Quantity per Year) / (Aggregate Hybrid's Sales Quantity
per Year) GREATER THAN 2%
3
c. Aggregate sales quantity per year should be more than 10,000 units.
8. General Provisions
Other terms and conditions including the effective period of this Agreement
shall be governed by the HybIto S&P Agreement and the SharpIto S&P Agreement.
Hybrid Networks Inc. Sharp Corporation Itochu Corporation
------------------------- ------------------------ ------------------------
By: Xxxx X. Xxxxxxxxx By: By:
Title: Chairman, President & Title:
Chief Executive Officer
4