INTELLECTUAL PROPERTY LICENSE AGREEMENT

EXHIBIT 10.34

Execution Copy

INTELLECTUAL PROPERTY LICENSE AGREEMENT

This Intellectual Property License Agreement (this “Agreement”) dated as of July 23, 2019 (the “Effective Date”) is made by and between Lexaria CanPharm ULC, a British Columbia unlimited liability corporation with offices at #100 – 000 XxXxxxx Xxxx, Xxxxxxx, Xxxxxxx Xxxxxxxx, X0X 0X0, Xxxxxx (the “LICENSOR”), and Hill Street Beverage Company Inc. a Canadian corporation with offices at 000 Xxxxxxxxxx Xxxxxx, Xxxxx 0000, Xxxxxxx, XX X0X 0X0 (together with its successors and assigns the “LICENSEE”). LICENSOR and LICENSEE are sometimes referred to individually herein as a “Party” and collectively as the “Parties”.

RECITALS

WHEREAS ALL CAPITALIZED TERMS NOT OTHERWISE DEFINED BELOW ARE DEFINED IN EXHIBIT “D” HEREIN;

WHEREAS, LICENSEE is directly (or indirectly through a Partner, as further contemplated in Section 1.a below) engaged in the business of developing, manufacturing, and selling consumable liquid products which contain cannabis ingredients containing 0.3% or more tetrahydrocannabinol (“THC”) and/or other cannabinoids, pursuant to licenses issued by the authorities relevant in each and every geographic location referenced within this Agreement, pursuant to regulations promulgated thereby;

WHEREAS, LICENSOR has been issued a license from its parent company, being the indirect owner of certain intellectual property and technology related to, including but not limited to, the development, testing, and manufacturing process for THC infused products (the “Technology”) and further has been issued the right to sublicense the Technology to parties who wish to utilize the Technology with respect to products that incorporate THC; which Technology is more specifically described in Exhibit A and detailed batch records and formulation calculation spreadsheets that shall be provided by virtual data room (the “VDR”) and/or email upon the execution of this License Agreement, by LICENSOR to LICENSEE;

WHEREAS, LICENSEE wishes to utilize the Technology of LICENSOR (which shall include any Licensor’s Improvements, as defined in Section 3.c), and LICENSOR desires for LICENSEE to utilize the Technology with ingredients containing 0.3% or greater of THC and/or other cannabinoids to create, develop, manufacture and/or sell, either on its own account or as a contract manufacturer, consumable liquid products as of the Effective Date (together or separately, the “End Products”), as further described in Exhibit B, subject to the terms and conditions set forth herein. Such End Products shall only be distributed and/or sold by LICENSEE or a Partner, as defined in Section 1.a below, in compliance with all applicable laws and licensing requirements within every jurisdiction contained in the Territory, as defined in Exhibit D, which LICENSEE is permitted by this Agreement or an addendum to this Agreement to sell or distribute the End Products;

WHEREAS, the End Products may not be exported from the Territory to Mexico without express written permission granted in advance from the LICENSOR and is subject to entering a separate licensing agreement or an addendum to this Agreement, and is always subject to availability among other LICENSOR considerations; and

WHEREAS, the Parties intend and desire for these recitals to be incorporated into the Agreement, and to be bound by any representations or obligations contained therein.

NOW, THEREFORE, in consideration of the promises and the respective covenants and agreements of the parties contained in this Agreement, the Parties hereto agree as follows:

Execution Copy

AGREEMENT

License of Technology: Subject to the terms and conditions of this Agreement, LICENSOR hereby grants to LICENSEE a semi-exclusive (as defined in Section 2 below), non-transferable, non-sub-licensable, license to use the Technology to develop, test, make, sell, offer for sale and distribute the End Products during the Term of this Agreement. Notwithstanding the first sentence of this paragraph, LICENSEE is expressly permitted to sub-license its license to use the Technology to a Partner or to Related Entities (all as defined in Exhibit D). Provided also that in the event that a person acquires all of the issued and outstanding shares of LICENSEE, or all or substantially all of the assets of the LICENSEE, the LICENSEE shall be entitled to transfer all of its rights and obligations relating to this agreement to such person, and such person is entitled to all of the rights and benefits of the LICENSEE under this agreement with respect to End Products then being sold or produced by the LICENSEE on its own behalf or as a contract manufacturer.

a) Non-transferable: The license granted by this Section 1 may not be transferred or sublicensed by LICENSEE without LICENSOR’s written consent. However, LICENSEE has the right to sublicense its license to its Related Entities and/or to its Partner(s), without LICENSOR’s consent, provided that any sublicense issued by the LICENSEE to a Partner will be limited to one such sublicense per Country and the LICENSEE shall designate in writing to LICENSOR the name and address of the Partner for LICENSOR’s records. The Partner must agree in writing to all obligations of LICENSEE hereunder using the form provided in Exhibit E hereto, including those relating to confidentiality and non-use regarding both Parties’ Confidential Information. In the event that LICENSEE performs one or more of its obligations under this Agreement through any such Partner or Related Entity, then LICENSEE shall at all times be responsible for the performance by such Partner, or Related Entity, of LICENSEE’s obligations hereunder.

b) Other Products: The Parties agree that LICENSEE is not limited to production of the End Products defined herein, but that LICENSEE may develop, create and test new products and negotiate to obtain a license from the LICENSOR for new products subject to license availability from LICENSOR that are derived from or otherwise incorporate the Technology and such new products are only to be distributed and/or sold as permitted in compliance with all laws and licensing requirements within the applicable areas of the Territory and only after conditions applicable to a new license are met subject to Section 3 below.

c) Active Substances: Nothing in this Agreement infers applicability of the Technology by LICENSEE for enabling active substance incorporation and potentiation in LICENSEE’s End Products, other than those End Products derived from hemp and containing 0.3% or greater THC. LICENSEE is prohibited from developing, manufacturing or selling, whether directly or indirectly, including through its Partner, in its Territory, any End Product that is marketed as the following types of products: (i) a fat soluble vitamin product for vitamins A, D, E, and/or K, whether in their natural or synthetic forms, (ii) a Non-Steroidal Anti Inflammatory (“NSAID”) product which contains acetaminophen, ibuprofen, acetylsalicylic acid, diclofenac, indomethacin, and piroxicam, or substances similar thereto; or (iii) a nicotine or nicotine analog product and any other active substance not specifically named and allowed within this Agreement. Certain cannabinoids are thought to deliver anti-inflammatory benefits which benefits ARE permitted under this Agreement if delivered through the cannabinoids described as the End Products; and are only prohibited if delivered through NSAIDs’ as described in this Section.

2

Execution Copy

2) Semi-Exclusivity. LICENSEE will have the following rights to create, develop, produce and sell the End Products for ten (10) years in the Territory using the Technology licensed pursuant to this Agreement.

a) In the Territory: Semi-Exclusive rights from the Effective Date until October 17, 2029 (the “Expiry Date”), allowing LICENSEE the semi-exclusive ability to continue to manufacture the End Products directly or through its Related Entity or Partner in the Territory for the balance of the term of this Agreement as per Section 4. Semi-Exclusive under this Agreement means that LICENSOR will not permit more than five (5) additional entities, including the LICENSOR and its related companies, to license the Technology for any End Products in the Territory.

b) LICENSOR’s Products: Except as set forth herein, the LICENSOR shall not be prohibited from licensing or similar arrangements with respect to the Technology. LICENSOR is expressly permitted to utilize its Technology on any basis it chooses, at any time, for producing and commercializing its own products.

c) Severance Fee: LICENSEE may elect to end sales of all of the End Products in a Product Line, at its sole discretion, with the payment of a severance fee (“Severance Fee”) as set forth in Exhibit C. If LICENSEE elects to end sales of all of the End Products in a Product Line, then any other licensing provision benefits for the LICENSEE with respect to the End Products also end at that time. Notwithstanding the foregoing, for a period of 6 months after such election is made, LICENSEE shall be permitted to sell End Products using the Technology in an attempt to sell all finished goods inventories pertaining to the Technology.

d) Labels and Advertising for LICENSEE, Related Entity or Partner Branded End Products: It is a condition of the license granted to the LICENSEE, that, subject to applicable law, on the label of each LICENSEE, Related Entity or Partner branded End Product that uses the Technology and/or on websites and/or social media describing each LICENSEE, Related Entity or Partner, as applicable, branded End Product shall be printed the POWERED BY LEXARIA BIOSCIENCE word trademark and the associated pinwheel & leaf design trademark and, if there is available space, the DehydraTech word xxxx (the “Lexaria Trademarks”), in the manner set forth in Exhibit “C” (the “Trademark License”).

e) Labels and Advertising for End Products Produced as a Contract Manufacturer by LICENSEE: LICENSEE must inform its clients in writing that LICENSOR must not be identified by such clients in their own marketing, advertising and packaging; nor may the Lexaria Trademarks be utilized in any form by any LICENSEE client. LICENSEE is permitted to communicate directly to its clients that the Technology will/can be used; the benefits of the Technology; and that LICENSOR does not object and does support the use of the Technology. LICENSOR reserves the right to demand compliance of the LICENSEE client and a cessation of the Copacker relationship between the LICENSEE and the LICENSEE client if this condition is breached.

3

Execution Copy

Rights and Obligations Related to the Technology. Except as expressly provided in this section or elsewhere in this Agreement, neither Party will be deemed by this Agreement to have been granted any license or other rights to the other Party’s products, information or other intellectual property rights, either expressly or by implication, estoppel or otherwise.

	a)	LICENSOR Intellectual Property: LICENSOR, via its license from its parent company, retains its full, absolute, and complete rights to all processes covered or described in all of the issued patents and patent applications filed prior to the date of this Agreement as listed in the attached Exhibit A, and any future continuations, continuations in part or divisional applications filed thereto, including but not limited to the US Provisional patent applications, US Utility patent application, and the International patent application, that comprise the Technology (“Licensor IP”), unless LICENSOR or its parent company allows these applications to abandon or lapse, or otherwise fails to protect the Technology. Except as expressly provided for in Section 2, nothing in this Agreement or in the conduct of the Parties shall be interpreted as preventing LICENSOR from granting to any other person a license for use of the Technology or from using the Technology in any manner whatsoever.

	b)	LICENSEE Intellectual Property: Any intellectual property resulting solely from LICENSEE’s work, know-how, or development that does not include nor rely upon the Technology, Licensor IP or jointly owned intellectual property, as described in this Agreement, shall be owned by LICENSEE (“Licensee IP”).

	c)	Improvements:

i) LICENSOR Improvements: The entire right and title to the Technology, whether or not patentable, and any patent applications or patents based thereon, which directly relate to and are not severable from Licensor IP and which are improvements thereto by LICENSOR or any Related Entity of the LICENSOR, and such associated employees or others acting for LICENSOR’s or LICENSOR’s Related Entity’s behalf shall be owned solely by LICENSOR or such Related Entity of LICENSOR as designated by LICENSOR (in any such case the “Licensor Improvements”). The LICENSOR covenants and agrees that such Licensor Improvements shall be added to and included in the definition of the Technology and shall be available to the LICENSEE under this Agreement at no additional cost to the LICENSEE.

ii) LICENSEE Improvements: Rights and title to improvements whether or not patentable, and any patent applications or patents based thereon, which directly relate to and are not severable from Licensor IP and which are improvements thereto by LICENSEE, its employees or a Partner, as defined by this Agreement, shall be owned by the LICENSEE (“Licensee Improvements”). In respect to such Licensee Improvements, LICENSOR grants LICENSEE a license to use the underlying intellectual property supporting any such improvement for so long as this Agreement remains in effect (including any renewal terms) and LICENSOR agrees to negotiate in good faith, terms of a license renewal after the end of the Term of this Agreement and any renewal terms per Section 4.a. If LICENSEE develops any Licensee Improvements, LICENSEE will promptly provide LICENSOR with written notice of such Licensee Improvements to validate LICENSEE’S claim to Licensee Improvements. Following receipt of notice of such Licensee Improvements, LICENSOR shall have the exclusive option during the Term of this Agreement (and any renewal terms) to purchase or license from LICENSEE the Licensee Improvements for LICENSOR’s use, or for the use by LICENSOR’s Related Entities, upon mutually agreeable terms and conditions that the parties shall negotiate in good faith. The parties acknowledge and agree that in the event that the parties are unable to come to an agreement on the purchase of such Licensee Improvements, the Licensee Improvements may be licensed to the LICENSOR upon mutually agreeable terms and conditions that the parties shall negotiate in good faith.

iii) Joint Improvements: Rights and title to the Technology, whether or not patentable, and any patent applications or patents based thereon, which directly relate to and are not severable from Licensor IP and which are improvements thereto by both LICENSOR AND LICENSEE shall be jointly owned intellectual property by LICENSOR AND LICENSEE.

iv) Improvements; Assignment. LICENSEE and LICENSOR hereby represent that all Partners, employees and other persons acting on its behalf in performing its obligations under this Agreement shall be obligated under a binding written agreement to assign, or as it shall direct, all Joint Improvements that include or rely on the Technology conceived or reduced to practice by such Partners, employees or other persons acting on its behalf in accordance with this Agreement to the benefit of LICENSOR and LICENSEE.

v) Improvements; Confidential Information. All Improvements shall constitute Confidential Information and shall be subject to the confidentiality provisions set forth in this Agreement.

4

Execution Copy

Inventions; Reporting:

Upon making any invention that does not include or rely upon the Technology neither the LICENSOR nor the LICENSEE (in either such case the “Inventor”) will have any obligation to share such information of the invention with the other Party or inform the other Party of said invention, and the Inventor retains unrestricted rights and ability to use, assign, license, seek patent and other forms of intellectual property protection related to said invention. For the avoidance of doubt, any such new invention, development, technology, and/or intellectual property belongs solely to the Inventor.

Jointly Owned Intellectual Property: If any patent applications are filed seeking to protect any Joint Improvements (“Jointly Owned IP”), each Party shall be named as joint inventors.

	i)	Prosecution and Maintenance of Jointly Owned Patents. The Parties shall cooperate to cause the filing of one or more patent applications covering any such Jointly Owned IP. The Parties will mutually agree upon which of them shall be responsible for filing, prosecution and maintenance of Jointly Owned IP. The expenses of such filing, prosecution and maintenance shall be equally shared by the Parties unless one of the Parties assigns all of its rights to the other Party. Both Parties agree to assist the other Party in enforcing its rights in the Jointly Owned IP. The costs of any such assistance or cooperation will be borne by the requesting party.

	ii)	Jointly Owned IP Rights. LICENSOR grants to LICENSEE and the Related Entities of LICENSEE an exclusive, non-sub-licensable, fully-paid, royalty-free, perpetual license to any Jointly Owned IP. Further, LICENSEE grants to LICENSOR and the Related Entities of LICENSOR, an exclusive, non-sub-licensable, fully-paid, royalty-free, perpetual license to any Jointly Owned IP.

	f)	No Challenge. LICENSEE expressly acknowledges and agrees that all rights in and to the Technology shall remain vested in LICENSOR, and LICENSEE shall not assert any rights to the Technology except as otherwise provided in this Section 3.

	g)	Notice Requirements. To the extent required by applicable rules and regulations LICENSEE agrees that it will include such patent notices and other proprietary notices on all End Products or related materials that contain any Technology as may be reasonably required by regulators in order to give appropriate notice of all intellectual property rights therein or pertaining thereto.

	h)	Quality Control.

i) LICENSEE agrees to maintain and preserve the quality of the Technology, and to use the Technology in good faith and in a manner consistent with the uses approved herein.

ii) LICENSEE shall (a) ensure that all End Products and related materials under the Technology are developed, tested, promoted, manufactured and distributed in a professional manner in compliance with all generally accepted industry standards, and (b) comply in all material respects with any and all laws, rules and regulations that are applicable to the development, testing, promotion, manufacture and distribution of the End Products and such related materials.

iii) LICENSOR shall have the right, upon 30 days’ written notice to LICENSEE, to require LICENSEE to provide LICENSOR, or LICENSOR’s nominee, with samples of the End Products for inspection or alternatively to allow for LICENSOR, or LICENSOR’s nominee, to attend the facility of LICENSEE for inspection of the End Products, all for the purposes of quality control.

5

Execution Copy

	i)	Prosecution and Maintenance. LICENSOR, directly or indirectly, shall be solely responsible for, and have control of, preparing, filing, prosecuting, obtaining, and maintaining the Technology (including Provisional Patent Applications and, if any, issued Patents). LICENSOR shall take such actions as it shall deem to be appropriate in its discretion in connection therewith and shall pay all costs and expenses incurred by it in connection with the foregoing activities.

	j)	Infringement. If LICENSEE learns of any activity by a third party that might constitute an infringement of LICENSOR’s rights in any of the Technology, or if any third party asserts that LICENSEE’s use of the Technology constitutes unauthorized use or infringement, LICENSEE shall so notify LICENSOR.

	k)	Enforcement.

	i)	LICENSOR has the right, directly or indirectly, but not the obligation, to enforce its rights against any third-party infringement and to defend LICENSEE’s right to use the Technology. If LICENSOR prosecutes any alleged infringement of the Technology, or defends LICENSEE’s right to use the Technology, LICENSOR shall control such litigation and shall bear the expense of such actions. LICENSEE shall make all reasonable efforts to assist LICENSOR therewith, including joining such action as a party plaintiff or providing such evidence and expert assistance as LICENSEE may have within its control, with all costs for such cooperation to be borne by LICENSOR. LICENSOR shall retain the award of any damages in this case. If LICENSOR chooses to not enforce against an alleged infringement, LICENSEE may itself enforce LICENSOR’s rights (and its own rights as a Licensee) in the Lexaria Trademarks and/or the Technology, with all costs to be borne by LICENSEE. LICENSEE shall retain the award of any damages in this case.

	ii)	LICENSOR has the right of examination of LICENSEE financial statements, production records, shipping and warehouse slips and statements if and as required to substantiate reported production and sales levels used to determine royalty levels. Any information provided to LICENSOR under this section is provided under strictest confidentiality and is subject to the confidentiality clauses of this Agreement.

4)	Term and Termination.

a) Term and Renewal. This Agreement shall take effect upon signing by both Parties and shall remain in effect for the earlier of either the Expiry Date; or, such circumstances as described in Section 4.b. At any time after the ninth anniversary of the Effective Date, this Agreement may be renewed by LICENSEE for an additional ten (10) year term, on terms to be negotiated in good faith based on market conditions at the time of renewal by the Parties, provided that any renegotiated conditions will NOT result in LICENSEE fees exceeding 50% of the current fees payable plus the cumulative inflation rate for the initial term of the Agreement.

6

Execution Copy

Termination. This Agreement and the licenses granted hereunder may be terminated prior to the expiration of the initial term or any renewal term of this Agreement as follows:

	i)	This Agreement will automatically be terminated, unless mutually agreed by the Parties to be amended, if LICENSEE fails to complete the acquisition of OneLeaf Cannabis Corp. within 120 days of the Effective Date of this Agreement (the “Termination Trigger”). All obligations of the LICENSOR and LICENSEE pursuant to this Agreement, including, but not limited to the issuance of a license or the payment of any fees, will become null and void and of no further force or effect on the date of the Termination Trigger.

	ii)	This Agreement may be terminated by LICENSOR by written notice to LICENSEE upon the occurrence of any of the following: (i) failure of LICENSEE to pay any license fees for more than sixty (60) days after they become due and ten (10) days written notice of such breach has been provided to LICENSEE by LICENSOR; (ii) LICENSEE’s violation of the provisions of Sections 7 and 9 or LICENSEE’s material breach of any other term of this Agreement, which breach is not cured within sixty (60) days after written notice of such breach from LICENSOR; (iii) failure of LICENSEE to maintain all required licenses and governmental authorizations required for the conduct of its business or to comply in all material respects with applicable laws; or (iv) LICENSEE ceases operations, makes a general assignment for the benefit of creditors, or is the subject of a voluntary or involuntary bankruptcy, insolvency or similar proceeding.

	iii)	This Agreement may be terminated by LICENSEE by written notice to LICENSOR (i) in the event of material breach by LICENSOR of its obligations or representations and warranties under this Agreement, which breach is not cured within sixty (60) days after written notice of such breach from LICENSEE; or (ii) without cause and upon payment of the Severance Fee noted in section 2 (c) and as set out in Exhibit C.

c) Effect of Termination. Except as provided for in Section 5, LICENSEE’s payment obligations shall extinguish if this Agreement is terminated. If the Agreement expires without any renewal thereof, then LICENSEE must immediately cease and desist all utilization of the Technology for any purpose whatsoever including to manufacture, distribute or sell End Products, except that LICENSEE may continue to distribute and sell End Products until all finished goods and raw materials inventory that pertain to the Technology have been sold and LICENSEE shall be obligated to pay LICENSOR any related License Fees (as defined in section 5) for such sales. In any event, upon the natural future expiration of all pending and issued patents, as applicable, related to the Technology described herein the License Agreement shall expire and LICENSEE shall have no further payment obligations to LICENSOR.

d) Survivability. This agreement in its entirety survives and remains in force if either Party is acquired by any unknown third party. In the event that either Party negotiates any such sale or acquisition, then it shall form a part of any such sale or acquisition agreement, that this Agreement remains binding upon the third party that is the purchaser or acquirer.

e) Change of Control. In the event that LICENSEE is purchased as to 50.1% or more (a “Change of Control”) by any entity, this Agreement remains valid only in relation to those End Products that were in commercial production at the time of Change of Control by LICENSEE on its own behalf or as a contract manufacturer. This Agreement grants no rights to any third party to utilize the benefits of the Technology for any products other than the End Products described within.

7

Execution Copy

5)	Compensation and Payment.

In consideration for the license granted to LICENSEE under this Agreement, LICENSEE shall pay LICENSOR certain license fees as set forth in Exhibit C (collectively, the “License Fee”). The License Fee for a period shall be paid by LICENSEE to LICENSOR, in U.S. funds, by cheque or wire transfer of immediately available funds pursuant to the bank account identified by LICENSOR in advance of such payment, or otherwise through the issuance of shares in the capital of the LICENSEE as provided for in Exhibit C If LICENSEE materially breaches this Agreement, LICENSEE shall remain responsible for any License Fee payments due through the end of the calendar quarter during which such breach occurs. LICENSEE’s failure to pay any portion of the applicable License Fee or any reimbursable expenses when due will be a material breach of this Agreement by LICENSEE. If any payment due to LICENSOR under this Agreement is not paid within thirty (30) days following such Party’s written demand therefore, then such payment shall bear interest at the rate of one and one-half percent (1.5%) per month from the date such payment was originally due.

6)	Obligations.

Obligations of LICENSEE.

LICENSEE shall be solely responsible for all costs of producing the End Products, including raw materials and labor. LICENSEE acknowledges and agrees that it is solely responsible as applicable for (i) procurement of cannabis extraction machinery, cannabis, cannabis oils, and other raw materials as required; (ii) compliance with all applicable laws relating to production and sale of cannabis products; and (iii) procurement and maintenance of all required licensing and permits and/or operating authorities, including proper zoning of production and distribution facilities.

Obligations of LICENSOR.

	i)	Upon execution of this Agreement, LICENSOR shall make the Technology and any additional documents or materials not yet provided as described in Section 1 otherwise necessary to effectuate the license of the Technology contemplated herein available for LICENSEE.

	ii)	Upon request by LICENSEE, LICENSOR shall provide LICENSEE with onsite or remote support in connection with LICENSEE's use of the Technology (including Licensor Improvements) during the term of this Agreement, with reasonable travel expenses paid for by LICENSEE.

7)	Representations and Warranties.

Representations and Warranties of LICENSEE. LICENSEE represents and warrants to LICENSOR as follows:

i) LICENSEE is a corporation duly organized and in good standing under the laws xx Xxxxxxx, Xxxxxx;

ii) the execution, delivery and performance of this Agreement by LICENSEE has been duly authorized by all necessary action on the part of LICENSEE’s directors, managers and/or members and does not violate, conflict with, or require the consent or approval of any third party pursuant to any contract or legally binding obligation to which LICENSEE is subject;

iii) this Agreement constitutes the valid and binding obligation of LICENSEE enforceable against LICENSEE in accordance with its terms;

iv) LICENSEE is knowledgeable of the applicable laws and regulations of the Territory pertaining to the research, manufacture and distribution of the End Products, the use of cannabis and THC in the End Products and the use of the Technology and confirms that the LICENSEE is in compliance with such laws and regulations; and

v) before LICENSEE begins to distribute and sell the End Products which use the Technology, LICENSEE will possess all required licenses, permits or operating authorities necessary for its operations and the manufacture and sale of the End Products as cannabis products and will be in compliance with all applicable laws and regulations.

8

Execution Copy

Representations and Warranties of LICENSOR. LICENSOR represents and warrants to LICENSEE as follows:

	i)	LICENSOR is a corporation duly organized and in good standing under the laws of British Columbia at the time of entering this Agreement;

	ii)	the execution, delivery and performance of this Agreement by LICENSOR has been duly authorized by all necessary action on the part of LICENSOR’s directors and officers and does not violate, conflict with, or require the consent or approval of any third party pursuant to any state or local law or regulation applicable to LICENSOR or any contract or legally binding obligation to which LICENSOR is subject;

	iii)	this Agreement constitutes the valid and binding obligation of LICENSOR enforceable against LICENSOR in accordance with its terms;

	iv)	the LICENSOR has been granted all applicable rights to the Technology legally required to permit the license contemplated under this Agreement;

	v)	The LICENSOR is included in, and bound by, the maximum of six (6) licenses contemplated under the semi-exclusive nature of this Agreement. The LICENSOR’s related companies, including but not limited to Lexaria Bioscience Corp., and Poviva Corp., shall not be permitted to issue similar licenses for the End Products contemplated within this Agreement; and

	vi)	the Technology and Licensed Patents do not infringe any third-party rights.

8)	Reliance. Each Party acknowledges that the other Party is relying on the representations and warranties provided herein with respect to entering into this Agreement and the related license to the Technology.

9)	Confidentiality. In addition to the Confidentiality Agreement previously entered into by the Parties, at all times during the term of this Agreement (including any renewal term) and thereafter, each Party undertakes not to use or disclose and to otherwise keep confidential, any trade secrets or proprietary information, including, but not limited to the Technology and other intellectual property of the other Party (in each instance, the “Confidential Information”) except to the extent required to perform each Party’s respective obligations under this Agreement. Without limitation of the foregoing, each Party will hold the other Party’s Confidential Information in confidence and will (a) exercise the same degree of care, but no less than a reasonable degree of care, to prevent its disclosure as such Party would take to safeguard its own confidential or proprietary information, and (b) limit disclosure of the Confidential Information, including any notes, extracts, analyses or materials that would disclose the Confidential Information, solely to those of its employees who need to know the information for purposes of performing the respective Party’s obligations under this Agreement and who agree to keep such information confidential. Upon termination of this Agreement, each Party shall immediately return all Confidential Information to the other Party and further the LICENSOR shall have the right to conduct an on-site audit of the LICENSEE within three (3) business days of termination to ensure compliance with the terms of this Agreement, at LICENSOR’s expense.

Execution Copy

	a)	Limitations. This section does not apply to any information that: (a) is already lawfully in the receiving Party's possession (unless received pursuant to a nondisclosure agreement); (b) is or becomes generally available to the public through no fault of the receiving Party; (c) is disclosed to the receiving Party by a third party who may transfer or disclose such information without restriction; (d) is required to be disclosed by the receiving Party as a matter of law (provided that the receiving Party will use all reasonable efforts to provide the disclosing Party with prior notice of such disclosure and to obtain a protective order therefor, with all costs to be borne by the disclosing Party); (e) is disclosed by the receiving Party with the disclosing Party's approval; or (f) is independently developed by the receiving Party without any use of Confidential Information. In all cases, the receiving Party will use all reasonable efforts to give the disclosing Party ten (10) days' prior written notice of any disclosure of information under this Agreement. The Parties will maintain the confidentiality of all confidential and proprietary information learned pursuant to this Agreement for a period of ten (10) years from the date of termination of this Agreement.

	b)	Saving Provision. The Parties agree and stipulate that the agreements contained in this Section are fair and reasonable in light of all of the facts and circumstances of their relationship; however, the Parties are aware that in certain circumstances courts have refused to enforce certain agreements. Therefore, in furtherance of and not in derogation of the provisions of the preceding paragraph the parties agree that in the event a court should decline to enforce the provisions of the preceding paragraph, that paragraph shall be deemed to be modified to restrict non-enforcing Party’s rights under this Agreement to the maximum extent, in both time and geography, which the court shall find enforceable.

10)

Injunctive Relief. The Parties agree any breach of this Agreement by LICENSEE shall cause LICENSOR immeasurable and irreparable harm and LICENSOR shall be entitled to seek immediate injunctive relief from any court of competent jurisdiction, in addition to any other remedies that LICENSOR may have at law or in equity. The Parties further agree any breach of this Agreement by LICENSOR shall cause LICENSEE immeasurable and irreparable harm and LICENSEE shall be entitled to seek immediate injunctive relief from any court of competent jurisdiction, in addition to any other remedies that LICENSEE may have at law or in equity.

11)

Indemnification.

	a)	LICENSEE agrees to indemnify LICENSOR and hold LICENSOR harmless from and against any and all liabilities, losses and expenses arising from (i) LICENSEE’s unauthorized use of the Technology; (ii) LICENSEE’s failure to comply with applicable laws or to maintain all required licenses and governmental authorizations; (iii) any breach of LICENSEE’s representations and warranties set forth herein; and (iv) any liability to third parties as a result of LICENSEE’s production, distribution and/or sale of End Products, except as to any liability arising out of the proper use of the Technology.

	b)	LICENSOR agrees to indemnify LICENSEE and hold LICENSEE harmless from and against any and all liabilities, losses and expenses arising from (i) any breach of LICENSOR’s representations and warranties set forth herein; and (ii) any claims of infringement raised by third parties as to the Technology or Licensed Patents.

	c)	If a Party seeks indemnification (the “Indemnitee”), it shall give written notice to the other Party (the “Indemnitor”) promptly after the Indemnitee becomes aware of the facts giving rise to such claim for indemnification (an “Indemnified Claim”), and in any event within 30 days, specifying in reasonable detail the factual basis of the Indemnified Claim and stating the amount of the damages (or if not known, a good faith estimate of the amount of damages).

Execution Copy

	d)	In the event of receipt of notice of an Indemnified Claim arising out of the use of the LICENSOR’s Technology, the Indemnitor shall have the right to control and defend such Indemnified Claim, in such manner as it may reasonably deem appropriate. Should the Indemnitor decline to control and defend the Indemnified Claim, the Indemnitee shall have the right to control and defend the Indemnified Claim in such manner as it may deem appropriate. The controlling party shall select counsel, contractors, experts and consultants of recognized standing and competence reasonably acceptable to the other party, shall take reasonable steps necessary in the investigation, defense or settlement thereof, and shall diligently and promptly pursue the resolution thereof. All parties shall cooperate fully with the party conducting the defense of any Indemnified Claim.

	e)	The Party controlling the defense of any Indemnified Claim shall be authorized to consent to a settlement of, or the entry of any judgment arising from, any Indemnified Claims subject to the following provisions. If the Indemnitor is controlling the litigation, Indemnitee must consent to any such settlement, such consent not to be unreasonably withheld. Indemnitee’s consent will be deemed unreasonably withheld unless the settlement would encumber any of its assets or contains any restriction or condition that would apply to the Indemnitee or to the conduct of its business. If the Indemnitee is controlling the litigation, it may not enter into a settlement or consent to an entry of judgment with respect to any Indemnified Claim without the express written consent of the Indemnitor, not to be unreasonably withheld.

	f)	Indemnitor shall be responsible for paying any damages or settlement arising out of an Indemnified Claim. However, in the event Indemnitee pays such damages or settlement, Indemnitor shall reimburse Indemnitee within thirty (30) days of Indemnitee making such a payment.

12) Limitation of Liability. EXCEPT TO THE EXTENT OTHERWISE EXPRESSLY AGREED TO IN THIS AGREEMENT, NEITHER PARTY SHALL BE LIABLE TO THE OTHER PARTY FOR LOST PROFITS OR FOR ANY DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES IN CONNECTION WITH THIS AGREEMENT OR THE TRANSACTIONS CONTEMPLATED BY THIS AGREEMENT, HOWEVER CAUSED, UNDER ANY THEORY OF LIABILITY. THE FOREGOING SHALL NOT LIMIT LICENSEE’S LIABILITY FOR UNAUTHORIZED USE BY LICENSEE OF LICENSOR’S TECHNOLOGY.

13) No Warranties. OTHER THAN THE EXPRESS WARRANTIES PROVIDED HEREIN, LICENSOR MAKES NO EXPRESS WARRANTIES OF MERCHANTABILITY OR FITNESS OR EFFICACY FOR A PARTICULAR PURPOSE OF THE TECHNOLOGY AND/OR ANY END PRODUCTS PRODUCED FROM SAID TECHNOLOGY AND SHALL NOT BE HELD LIABLE FOR PROFITABILITY OF TECHNOLOGY AND/OR END PRODUCTS OR HELD LIABLE UNDER ANY OTHER THEORY OF LIABILITY.

14) Insurance. For the period of time required to cover its obligations hereunder, each Party will maintain third party provided insurance in types and amounts customary for the type of business it conducts, and in any event reasonably adequate to cover any liabilities arising out of its obligations hereunder. Further, LICENSEE will maintain product liability insurance reasonably adequate to cover any liabilities arising out of the sale and distribution of End Products. Upon a Party’s request, the other Party will provide to the requesting Party a certificate of insurance showing that such insurance is in place, which certificate shall demonstrate the amounts, exclusions and deductibles of such insurance coverage. Each Party shall notify the other Party in writing no less than thirty (30) days prior to the cancellation, termination or modification of the insurance coverage(s) described in the notifying Party’s insurance certificate(s). Nothing in this Section shall in any way be construed to limit the liability of a Party under this Agreement.

11

Execution Copy

15) Compliance with Laws. In connection with this Agreement, LICENSEE agrees to comply with all applicable laws, statutes and ordinances of any state, city, provincial, county or local governmental authority and each regulatory body with jurisdiction in which the LICENSEE sells End Products, that may be applicable to LICENSEE, its activities under this Agreement or the End Products.

16) Conformance with Regulations. The Parties acknowledge and agree that this Agreement, and the licensing of the Technology, is neither intended to convey any ownership interest in LICENSEE to LICENSOR nor grant LICENSOR any control over LICENSEE. In the event that any government body indicates otherwise with regards to this Agreement or any portion thereof, then the Parties shall promptly negotiate in good faith for a period of forty-five (45) days to modify this Agreement in order to conform to any guidance proffered by that authority. In the event the Parties cannot reach an agreement within forty-five (45) days’ notice by any authorized government body that this Agreement must be reformed, this Agreement shall terminate pursuant to Section 4 above, and the Parties shall thereafter have no further obligation to each other hereunder.

17) Employees; Agents; Representatives. Employees, agents and/or representatives, if any, of either Party, including LICENSEE’s Partner, who perform services for either Party pursuant to this Agreement shall also be bound by the provisions of this Agreement.

18) Relationship of Parties. The legal relationship of the Parties is exclusively that of licensor and licensee and no employer-employee, principal-agent, partnership, franchise, agency, joint venture or other legal relationship is created by this Agreement. Neither Party shall have the authority to enter into any contracts on behalf of the other Party.

19) Successors; Assignment; Binding Agreement. Except as otherwise provided in this Agreement, LICENSEE may not assign or transfer its rights or delegate its obligations under this Agreement without LICENSOR’s prior written consent, provided that in the event that a person acquires all of the issued and outstanding shares of LICENSEE, or all or substantially all of the assets of the LICENSEE, the LICENSEE shall be entitled to transfer all of its rights and obligations relating to this Agreement to such person, and such person is entitled to all of the rights and benefits of the LICENSEE under this Agreement with respect to End Products then being sold or produced by the LICENSEE on its own behalf or as a contract manufacturer. LICENSOR may freely assign this Agreement or any rights under this Agreement or delegate any duties under this Agreement without LICENSEE’s consent provided that the assignee agrees to assume all of LICENSOR’s obligations and liabilities hereunder. This Agreement inures to the benefit of, and shall be binding upon, the successors and assigns of the parties to this Agreement. This Agreement and all of its provisions and conditions are for the sole and exclusive benefit of the Parties and their respective successors and permitted assigns.

20) Modifications and Waivers. This Agreement may be amended only by a written agreement signed by both Parties. With regard to any power, remedy or right provided in this Agreement, no waiver or extension of time shall be effective unless expressly contained in writing signed by the waiving Party, no alteration, modification or impairment shall be implied by reason of any previous waiver, extension of time, delay or omission in exercise or other indulgence, and waiver by any Party of the time for performance of any act or condition hereunder does not constitute a waiver of the act or condition itself.

12

Execution Copy

21)

Notice. Except as otherwise provided in this Agreement, notices required to be given pursuant to this Agreement shall be effective when received, and shall be sufficient if given in writing, hand-delivered, sent by facsimile with confirmation of receipt, sent by First Class Mail, return receipt requested (for all types of correspondence), postage prepaid, sent by email, or sent by overnight courier service and addressed as set forth below, or as amended by either Party, respectively, from time to time:

If to LICENSEE:

Hill Street Beverage Company Inc.

480 Xxxxxxxxxx Xxxxxx, Xxxxx 0000

Xxxxxxx, XX X0X 0X0

Att: Xxxxx Xxxxxxxx

Email: xxxxx@xxxxxxxxxxxxxxx.xxx

Fax: 000-000-0000

If to LICENSOR:

Lexaria CanPharm ULC

#100-000 XxXxxxx Xx

Xxxxxxx, XX X0X 0X0

Att: Xxxxx Xxxxx

xxxxxx@xxxxxxxxxxxxxxxxx.xxx

Fax: 000-000-0000

No objection may be made to the manner of delivery of any notice or other communication in writing actually received by a Party.

22) Entire Agreement. This Agreement, including the attached exhibits, constitutes the entire agreement of the Parties hereto relating to the subject matter hereof and there are no written or oral terms or representations made by either Party other than those contained herein.

23) Publicity. Without the prior written consent of the other Party, neither Party shall disclose the terms and conditions of this Agreement, except disclosure may be made as is reasonably necessary to the disclosing Party's bankers, attorneys, or accountants or except as may be required by law. The LICENSOR agrees not to use the LICENSEE’s corporate name or product names, in any form, in any press release or other publication, without permission from the LICENSEE, except as provided below. The Parties understand and agree that LICENSOR may be compelled by stock exchanges, securities commission regulators or other government authorities to publicly disclose the signing of said License Agreement naming both Parties. If LICENSOR is compelled by stock exchanges, securities commission regulators or other government authorities to publicly disclose the signing of said License Agreement, LICENSOR will share its planned announcement with LICENSEE beforehand for LICENSEE’s review and approval, not to be unreasonably withheld or delayed, and it will also ensure that no compromise of the LICENSEE’s existing secret processes or intellectual property, nor of LICENSEE`S personal or private information occurs through this announcement.

24) Expenses. Each Party to this Agreement shall bear all of its own expenses in connection with the execution, delivery and performance of this Agreement and the transactions contemplated hereby, including without limitation all fees and expenses of its agents, representatives, counsel and accountants.

13

Execution Copy

25)	Governing Law; Jurisdiction. This Agreement will be governed by, and construed in accordance with the substantive laws of the Province of British Columbia without giving effect to any choice or conflict of law provision, except that questions affecting the construction and effect of any patent shall be determined by the law of the country in which the patent shall have been granted, the parties irrevocably attorn to the jurisdiction of the courts of the Province of British Columbia to resolve any disputes arising hereunder.

26)	Dispute Resolution.

	a)	Mandatory Procedures. The Parties agree that any dispute arising out of or relating to this Agreement shall be resolved solely by means of the procedures set forth in this Section and that such procedures constitute legally binding obligations that are an essential provision of this Agreement. If either Party fails to observe the procedures of this Section, as may be modified by their written agreement, the other Party may bring an action for specific performance of these procedures in any court in the Province of British Columbia.

	b)	Equitable Remedies. Although the procedures specified in this Section are the sole and exclusive procedures for the resolution of disputes arising out of or relating to this Agreement, either Party may seek a preliminary injunction or other provisional equitable relief if, in its reasonable judgment, such action is necessary to avoid irreparable harm to itself or to preserve its rights under this Agreement.

	c)	Dispute Resolution Procedures.

	i)	Mediation. In the event any dispute arising out of or relating to this Agreement remains unresolved within sixty (60) days from the date the affected Party informed the other Party of such dispute, either Party may initiate mediation upon written notice to the other Party (“Notice Date”), the Parties shall be obligated to engage in a mediation proceeding under the then current Center for Public Resources (“CPR”) Model Procedure for Mediation of Business Disputes (xxx.xxxxxx.xxx), except that specific provisions of this Section shall override inconsistent provisions of the CPR Model Procedure. The mediator will be selected from the CPR Panels of Neutrals. If the Parties cannot agree upon the selection of a mediator within fifteen (15) business days after the Notice Date, then upon the request of either Party, the CPR shall appoint the mediator. The Parties shall attempt to resolve the dispute through mediation until the first of the following occurs: (i) the Parties reach a written settlement, (ii) the mediator notifies the Parties in writing that they have reached an impasse, (iii) the Parties agree in writing that they have reached an impasse, or (iv) the Parties have not reached a settlement within sixty (60) days after the Notice Date.

	ii)	Failure to Mediate. If the Parties fail to resolve the dispute through mediation, each Party shall have the right to pursue any other remedies legally available to resolve the dispute, including by way of arbitration or a suit.

Performance to Continue. Each Party shall continue to perform its undisputed obligations under this Agreement pending final resolution of any dispute arising out of or relating to this Agreement; provided, however, that a Party may suspend performance of its undisputed obligations during any period in which the other Party fails or refuses to perform its undisputed obligations. Nothing in this Section is intended to relieve LICENSEE from its obligation to make undisputed payments pursuant to Section 5 of this Agreement.

27) Attorneys’ Fees. In the event of any dispute between the parties arising out of this Agreement, the prevailing Party shall be entitled, in addition to any other rights and remedies it may have, to recover its reasonable attorneys’ fees and costs.

28) No Interpretation Against Drafter. Each Party participated in the negotiation and drafting of this Agreement, assisted by such legal and tax counsel as it desired, and contributed to its revisions. Any ambiguities with respect to any provision of this Agreement will be construed fairly as to all Parties and not in favor of or against any Party. All pronouns and any variation thereof will be construed to refer to such gender and number as the identity of the subject may require. The terms “include” and “including” indicate examples of a predicate word or clause and not a limitation on that word or clause.

14

Execution Copy

29)	Headings. The headings of Sections are provided for convenience only and will not affect the construction or interpretation of this Agreement.

30)	Force Majeure. Neither Party shall be liable for any delay or failure to perform its obligations in this Agreement if such delay or failure to perform is due to any cause or condition reasonably beyond that Party’s control, including, but not limited to, acts of God, war, government intervention, riot, embargoes, acts of civil or military authorities, earthquakes, fire, flood, accident, strikes, inability to secure transportation, facilities, fuel, energy, labor or materials.

31)	Survival. In addition to LICENSEE’s obligation to pay LICENSOR all amounts due hereunder, the Parties obligations under this Agreement shall survive expiration or termination of the Agreement only as expressly provided herein

32)	Invalidity. The invalidity or unenforceability of any term or terms of this Agreement shall not invalidate, make unenforceable or otherwise affect any other term of this Agreement which shall remain in full force and effect.

33)	Severability. If any terms or provisions of this Agreement shall be found to be illegal or unenforceable, notwithstanding, this Agreement shall remain in full force and effect and such terms or provisions shall be deemed stricken.

34)	Further Assurances. Upon a Party’s reasonable request, the other Party shall, at requester’s sole cost and expense, execute and deliver all further documents and instruments, and take all further acts, as are reasonably necessary to give full effect to this Agreement.

35)	Counterparts. The Parties may execute this Agreement in multiple counterparts, each of which will constitute an original and all of which, when taken together, will constitute one and the same agreement.

THE REMAINDER OF THIS PAGE HAS BEEN LEFT INTENTIONALLY BLANK

Execution Copy

IN WITNESS WHEREOF, the parties have executed this Agreement intending to be legally bound as of the date set forth above.

“LICENSOR” LEXARIA CANPHARM ULC		“LICENSEE” HILL STREET BEVERAGE COMPANY INC.

By:	Signed “Xxxx Xxxxxxxx”	By:	signed “Xxxxx Xxxxxxxx”
	Xxxx Xxxxxxxx, President	Name:	Xxxxx Xxxxxxxx, CEO

By:	signed “Xxxxx Xxxxx”
	Xxxxx Xxxxx, CEO

Execution Copy

EXHIBIT A

TECHNOLOGY

The Technology consists of:

	(1)	the following patent applications, patents granted, and PCT International Patent Applications;

	(2)	all patentable improvements and non-patentable improvements to the patent applications, patents granted and PCT International Patent Applications;

	(3)	all technical know-how and trade secrets in regard to such named patents, including the use, manufacture or formulation thereof, that is owned or controlled by LICENSOR as of the Effective Date of this Agreement, as well as any future continuations, continuations in part or divisional applications filed pursuant to the patent applications. (the “Licensed Patents”):

In the USA:

U.S. Patent No. 9,474,725 issued October 25, 2016.

U.S. Patent No. 9,839,612 issued November 21, 2017

U.S. Patent No. 9,972,680 issued May 15, 2018.

U.S. Patent No. 9,974,739 issued May 22, 2018

U.S. Patent No. 10,084,044 issued September 25, 2018

U.S. Patent No. 10,103,225 issued October 16, 2018

U.S. Provisional Patent Application No. 62/010,601.

U.S. Provisional Patent Application No. 62/037,706.

U.S. Provisional Patent Application No. 62/153,835.

U.S. Provisional Patent Application No. 62/161,324.

U.S. Provisional Patent Application No. 62/264,959.

U.S. Provisional Patent Application No. 62/264,967.

U.S. Provisional Patent Application No. 62/642,737.

U.S. Provisional Patent Application No. 62/519,511.

U.S. Provisional Patent Application No. 62/582,700.

U.S. Provisional Patent Application No. 62/659,059.

U.S. Provisional Patent Application No. 62/658,473.

U.S. Provisional Patent Application No. 62/748,514.

U.S. Provisional Patent Application No. 62/689,096.

U.S. Provisional Patent Application No. 62/748,520.

U.S. Provisional Patent Application No. 62/730,645.

U.S. Provisional Patent Application No. 62/850,506.

U.S. Provisional Patent Application No. 62/850,509.

U.S. Utility Patent Application No. 14/735,844.

U.S. Utility Patent Application No. 15/565,680.

U.S. Utility Patent Application No. 15/565,681.

U.S. Utility Patent Application No. 16/148,419.

U.S. Utility Patent Application No. 16/148,473.

Execution Copy

International Patent Cooperation Treaty Filings:

PCT International Patent Application No. PCT/US15/35128.

PCT International Patent Application No. PCT/US16/64295.

PCT International Patent Application No. PCT/US16/64296.

PCT International Patent Application No. PCT/US18/38232.

PCT International Patent Application No. PCT/US18/62677

PCT International Patent Application No. PCT/US19/22278.

PCT International Patent Application No. PCT/US19/27767.

PCT International Patent Application No. PCT/US19/27769.

In Australia

Australian Patent No. 2015274698 granted June 15, 2017.

Australian Patent No. 2017203054 granted August 30, 2018.

Australian Patent No. 2018202562 granted August 30, 2018.

Australian Patent No. 2018202583 granted August 30, 2018.

Australian Patent No. 2018202584 granted January 10, 2019.

Australian Patent Application No. 2018220067.

Australian Patent Application No. 2018226505.

Australian Patent Application No. 2016367036.

Australian Patent Application No. 0000000000.

Australian Patent Application No. 2016367037.

Australian Patent Application No. 0000000000.

Multiple National Filings:

Canada, The European Union, China, Japan, Mexico, and India

Execution Copy

EXHIBIT B: THC END PRODUCT CATEGORIES

Product Line Name

GLOBAL

(except Mexico)

Territory License Fee:

US$

For Entire Term

Product Line Description

Specifically EXCLUDED from all Product Categories is any/all right to produce, package or sell any product classified by a national regulator as a “drug, pharmaceutical, or biopharmaceutical” product, unless express written consent from LICENSOR has been provided.

Consumable Liquids Products

US$1,800,000

Semi-Exclusive

Any READY TO DRINK consumable liquid products including, but not limited to, cold brew or hot coffee, teas, lemonades, flavored waters, juices, beers, wines, spirits, protein drinks, sport drinks, cocoa drinks, kombuchas, probiotics, energy drinks/shots, vitamin waters, tinctures, dressings, honeys and syrups, flavored sprays for consumption by way of ingestion that are infused with hemp oil/isolate or equivalent containing 0.3% or greater THC.

Trademark License

Included in Territory Fee

Use of the Lexaria Trademarks on the End Products in the Territory and the right to access the clinical data from Lexaria Bioscience Corp.'s 2018 randomized, placebo-controlled, double-blinded European human clinical study regarding the effectiveness of the Technology on CBD absorption rates and associated cardiovascular benefits and any additional experimental trial findings made by Lexaria Bioscience Corp. (the “Clinical Studies”). HOWEVER, NO RIGHT IS GIVEN FOR THE LICENSEE TO REFERENCE, CITE OR REPRODUCE THE CLINICAL STUDIES WITHOUT THE EXPRESS WRITTEN CONSENT OF THE LICENSOR OR LEXARIA BIOSCIENCE CORP.

Execution Copy

Future Option: Optional Products for License as THC End Products

Product Line Name	GLOBAL (except Mexico) Territory License Fee: US$ Based on a 10 Year Term	Product Line Description Specifically EXCLUDED from all Product Categories is any/all right to produce, package or sell any product classified by a national regulator as a “drug, pharmaceutical, or biopharmaceutical” product.
Chocolate Products	*****⁽¹⁾ Semi-Exclusive	Any product that is generally recognized as chocolates, chocolate bars, chocolate treats, chocolate truffles, caramels, chocolate caramels, caramel treats, or primarily composed of a form of chocolate or cocoa and is infused with hemp oil/isolate or equivalent containing 0.3% or greater THC.
Candies	***** Semi-Exclusive	All products that are not Chocolates but are generally recognized as “candies,” “gummies and jellies,” “suckers,” “hard or rock candies,” “jelly beans”, mints and non-chocolate mint products, etc., that are primarily made with sugar and/or other sweeteners and not generally recognized as a natural food and is infused with hemp oil/isolate or equivalent containing 0.3% or greater THC. This category excludes pills, tablets and capsules that are not primarily made with sugar and/or other sweeteners, that are generally recognized as vitamins, supplements, medicines, sublingual or rapidly dissolving mouth-melts.
Capsules, Pills, Tablets and Melts	***** Semi-Exclusive	Any product recognized as tablets, pills, capsules, gel-caps and other similar formulations that are infused with hemp oil/isolate or equivalent containing 0.3% or greater THC that utilizes the Technology and primarily not made with sugar and/or other sweeteners, that are generally recognized as vitamins, supplements, medicines, sublingual or rapidly dissolving mouth-melts.
Baked Goods	***** Semi-Exclusive	Items that are generally mixed in a semi-liquid or dough or batter form and then baked in an oven such as brownies, breads, cakes, cookies, squares, granola bars, muffins and is infused with hemp oil/isolate or equivalent containing 0.3% or greater THC.
Other Edible Products	***** Semi-Exclusive	Single serving or multiple serving retail packaged edible products containing 0.3% THC or greater, including, but not limited to the following: (i) mix and serve beverages such as dried teas, coffee, hot chocolate, iced-teas and similar; (ii) ingestible products or foods such as cereals, sauces, dips, creams, spreadables, essential oils, olive oils, flavored concentrates and condiments; (iii) culinary products and any item not otherwise referred to above that is chewed and/or swallowed and primarily absorbed via the gastro-intestinal system. Wholesale packaged “Other Edible Products” orDehydraTECH-infused powders of any kind are prohibited.
Topical Skin Products	***** Semi-Exclusive	Any cream, oil, salve or similar consumer product designed to be delivered to and through human skin that is infused with hemp oil/isolate or equivalent containing 0.3% or greater THC.

_______________

¹Certain information has been redacted: the omitted text sets forth the annual territory fee for each product line

Execution Copy

EXHIBIT C

LICENSE FEE

Upon execution of this Agreement, LICENSEE shall pay to LICENSOR the License Fee as set forth below. The License Fee shall be paid in accordance with Section 5 of this Agreement.

(a)

Territory License Fee. Subject to the Territory License Fee Reduction, as described in subparagraph (b) below, the LICENSEE agrees to pay to LICENSOR a territory license fee of US$1,800,000.00 for the Consumable Liquids product category, for access to use the Technology everywhere in the Territory until the Expiry Date of this Agreement (“Territory License Fee”). The Territory License Fee shall be paid and satisfied, at the sole option of the LICENSEE, either :

(i)

in cash pursuant to the following schedule:

Territory License Fee Payment Schedule

US$800,000.00 (the “Initial Payment”)

Payable on the later of: (i) sixty (60) days from the date of executing this Agreement; and (ii) ten (10) days after the LICENSEE has closed its acquisition of OneLeaf Cannabis Corp.

US$500,000.00 (the “First Foreign Transaction Payment”)

Within ten (10) days of the earlier of: (i) the export of any End Product to a country outside the country of Canada (the “Foreign Jurisdiction”); or (ii) the production of any End Product in a Foreign Jurisdiction

US$500,000.00 (the “Second Foreign Transaction Payment”)

Within ten (10) days of the earlier of: (i) the export of any End Product to a second Foreign Jurisdiction; or (ii) the production of any End Product in a second Foreign Jurisdiction

		or

	(ii)	through the issuance of Voting Common Shares (the “Shares”) in the authorized share capital of LICENSEE to be issued in accordance with the timelines noted in (i) above, at a deemed price per share as follows:

Payment	Share Price Calculation
The Initial Payment	The lesser of the market price of the LICENSEE’s Shares on the TSX Venture Exchange, on the business day immediately prior to the date this agreement is announced, or CDN$0.23 per share, all of which is subject to the approval of the TSX Venture Exchange for the issuance of Shares equal to the Initial Payment of US$800,000.00
The First Foreign Transaction Payment	A minimum of CDN$0.43 per share or the volume weighted average price ten days prior to the date of issuance with a maximum price of CDN$0.66 per share for the issuance of Shares equal to the First Foreign Transaction Payment of US$500,000.00, all of which is subject to the approval of the TSX Venture Exchange.
The Second Foreign Transaction Payment	A minimum of CDN$0.43 per share or the volume weighted average price ten days prior to the date of issuance with a maximum price of CDN$0.75 per share for the issuance of Shares equal to the Second Foreign Transaction Payment of US$500,000.00, all of which is subject to the approval of the TSX Venture Exchange.

The aggregate value of such LICENSEE Shares shall be equal to the value of the entire Territory License Fee, provided however, that the LICENSEE shall not be obligated to issue any fractional shares.

Execution Copy

(b)	Territory License Fee Reduction. Should LICENSEE choose to pay the Territory License Fee through the Issuance of Shares, the Territory License Fee will be reduced to prevent LICENSOR from holding more than 9.99%, on a fully diluted basis, of LICENSEE’s issued share capital. For further clarity, if at the time LICENSEE triggers the Second Foreign Transaction Payment the number of Shares issuable to LICENSOR would exceed the LICENSOR holding 9.99% of the LICENSEE’s issued share capital, LICENSEE would only be obligated to issue that number of Shares which would result in LICENSOR holding 9.99% of the LICENSEE’s issued share capital and the balance of the Second Foreign Transaction Payment would be waived by LICENSOR.

(c)	Usage Fee. For all End Products sold in the Territory, LICENSEE agrees to pay LICENSOR a usage fee (the “Usage License Fee”) during the life of the Agreement, whereby such Usage License Fee shall be payable to the LICENSOR, on a quarterly basis, with the commencement of the first calendar quarter being the earlier of: (i) April 1, 2020; or (ii) the date that the LICENSEE commences commercial sales of the End Products. The Usage License Fee is payable in arrears and net 30 days after each quarter (for greater certainty the first Usage License Fee would be payable for the quarter April 1, 2020 to June 30, 2020 no later than July 31, 2020) by LICENSEE to LICENSOR, and shall be subject to certain minimum performance conditions as described in subsection (c) below. The Usage License Fee to be paid by LICENSEE to LICENSOR shall collectively consist of and be based on the following Net Cost of Goods Sold percentages:

	(i)	** of the Net Cost of Goods Sold of Licensee, Related Entity or Partner branded End Products sold in the Territory;

	(ii)	** of Net Cost of Goods Sold of End Products manufactured by LICENSEE on behalf of its clients that use the Technology; and

	(iii)	** of the Net Cost of Goods Sold of End Products manufactured by LICENSEE for LICENSOR-contracted clients for End Products that do not use the Technology.²

(d)

Minimum Performance. The LICENSEE agrees to be subject to minimum sales performance criteria whereby, from the commencement of the payment of the aggregate Usage License Fee as detailed in subsection (c) above, the LICENSEE agrees to pay the LICENSOR ***** (“the Minimum Fee”) for each such quarter, with the commencement of the first calendar quarter being the earlier of: (i) April 1, 2020; or (ii) the date that the LICENSEE commences commercial sales of the End Products. The Minimum Fee shall be increased to ***** per quarter upon the First Foreign Transaction Payment being effected. This Minimum Fee is non-refundable, however, if the aggregate Usage License Fee totals more than this Minimum Fee in any given quarter, then this Minimum Fee is waived for that calendar quarter. The LICENSEE shall be responsible for providing LICENSOR with a calendar quarterly estimate of the Usage License Fee within 15 days following the end of each quarter.³

_________________

² Certain information has been redacted: the omitted text sets forth the percentages payable by LICENSEE to LICENSOR.

³ Certain information has been redacted: the omitted text sets forth the quarterly minimum fee.

Execution Copy

(e)	Severance Fee, if applicable. As provided for in Section 2(c), LICENSEE may elect to end sales of all of the End Products in a Product Line prior to the end of the Term, at its sole discretion, with a severance fee (“Severance Fee”) immediately then due which is the total of all minimum sales performance payments plus all Territory License Fees due in the six (6) months immediately following written notice of Termination. If LICENSEE elects to end sales of all End Products produced in a Product Line, then all licensing provision benefits with those End Products also end immediately.

(f)	Audit Rights. Upon at least thirty (30) days’ written notice, LICENSOR shall have the right, through an independent, certified accounting firm, to examine such records and books of account of LICENSEE as are necessary to verify the accuracy of the Usage License Fee and other payments of LICENSEE under this Agreement. Such right may be exercised only once during any twelve (12) month period. Such examination may be performed during normal business hours at LICENSEE’S major place of business or at such other place as may be agreed upon by the LICENSOR and LICENSEE. The accounting firm may make abstracts or copies of such books of account solely for its use in performing the examination. LICENSOR will require, prior to any such examination, such accounting firm to agree in writing that such firm will maintain all information, abstracts, and copies acquired during such examination in strict confidence and will not make any use of such material other than to confirm to LICENSOR the accuracy of LICENSEE payments hereunder. If an inspection of LICENSEE’S records by the accountant of LICENSOR shows that LICENSEE has paid more than required under this Agreement, any excess amounts will, at LICENSEE’S option, be promptly refunded or credited against future Usage License Fees. If an inspection of LICENSEE’S records by the accountant of LICENSOR shows that LICENSEE shows an under-reporting or underpayment by LICENSEE of any amount to LICENSOR, by more than one percent (1%) and less than five percent (5%) for any twelve (12) month period, any excess amounts will, at LICENSOR’s option, be promptly paid or debited against future Usage License Fees. However, if an inspection of LICENSEE’S records shows an under-reporting or underpayment by LICENSEE of any amount to LICENSOR, by more than ten percent (10%) for any twelve (12) month period, then LICENSEE will reimburse LICENSOR for the reasonable cost of the inspection as well as pay to LICENSOR any amount found due within thirty (30) days of receipt of the results of such inspection.

(g)	Trademark License Fee: No additional fees are payable by the Licensee for the use of the POWERED BY LEXARIA BIOSCIENCE word trademark and the associated pinwheel & leaf design trademark to be placed on the End Products, in the following manner, in a type size large enough to be readable by persons with average vision:

	The Licensee may also use, in addition to the above-noted trademarks, the Licensor’s word xxxx DehydraTech.

	Additionally, Licensee shall have the right to access the clinical data from Lexaria Bioscience Corp.'s 2018 randomized, placebo-controlled, double-blinded European human clinical study regarding the effectiveness of the Technology on CBD absorption rates and associated cardiovascular benefits and any additional experimental trial findings made by Lexaria Bioscience Corp. (the “Clinical Studies”). HOWEVER, NO RIGHT IS GIVEN FOR THE LICENSEE TO REFERENCE, CITE OR REPRODUCE THE CLINICAL STUDIES WITHOUT THE EXPRESS WRITTEN CONSENT OF THE LICENSOR OR LEXARIA BIOSCIENCE CORP.

Execution Copy

EXHIBIT D

CERTAIN DEFINITIONS

	“Hill Street” means the LICENSEE and any parent, any Subsidiary, or any of its Related Entities.

	“Net Cost of Goods Sold” means the gross material cost, manufacturing costs, manufacturing overhead, transportation, freight, postage and insurance of the LICENSEE for the manufacture and transport of End Products shipped to customers, to the extent that such amounts are not charged to the customers less (a) all trade, quantity, and cash discounts allowed; (b) taxes duties, tariffs, or other governmental charges imposed on such End Products, including but not limited to value added taxes or other governmental charges otherwise measured by the amount paid for the End Products, but specifically excluding taxes based on the net income of the seller.

	EXAMPLE ONLY:

“$8.00 wholesale price”
Cannabis cost	$	1.50
Testing cost	$	0.75
Packaging	$	0.90
Ingredients	$	0.40
Mnfg labor	$	0.32
Pkg labor	$	0.18
Transportation	$	0.05
Net Cost of Goods Sold Total	$	4.10

Lexaria x%		$x
Gross Profit		$x⁴

	“Partner” means any Person who either directly resells Hill Street’s products or manufactures products based on Hill Street’s technology under the direction of Hill Street and whose use of the Technology pursuant to a sublicense will be strictly for facilitating the LICENSEE’s rights and obligations under the Agreement.

	“Person” means any natural person, sole proprietorship, partnership, corporation, trust, joint venture, any governmental authority or any incorporated or unincorporated entity or association of any nature.

	“Related Entity” means, with respect to a body corporate: (i) a Subsidiary of the body corporate, including a Subsidiary of a Subsidiary of the body corporate; or (ii) a Person that controls, directly or indirectly, the body corporate; or (ii) a Person that is controlled by the same Person that controls such body corporate.

	“Subsidiary” means a corporation that is controlled directly or indirectly by another corporation.

	“Territory” means the entire world other than Mexico.

_________________

⁴ Certain information has been redacted: the omitted text refers to example figures

Execution Copy

EXHIBIT E

PARTNER OBLIGATIONS AGREEMENT

<<< Insert Name >>> (the “PARTNER”) agrees in writing to all obligations of <<< Insert Name >>> (the “LICENSEE”) as listed hereunder, including those relating to confidentiality and non-use regarding Confidential Information of both LICENSEE and LEXARIA CANPHARM ULC(the “LICENSOR”). The PARTNER is prohibited from utilizing the formulation methodologies, techniques, specified ingredients therewith and processes accompanying this agreement and/or listed in Exhibit A of the Intellectual Property License Agreement effected between the LICENSEE and the LICENSOR, (together or individually, the “Technology”) in any form whatever that is not directly related to the production/sale of the specified LICENSEE’s End Products and may not use the Technology for any other purpose unless authorized in writing from the LICENSOR, in advance.

	1.	LICENSOR retains full, absolute, and complete rights to all processes covered or described in all of its issued patents and its patent applications filed prior to the date of this Agreement, and any future continuations, continuations in part or divisional applications filed thereto, including but not limited to the US Provisional patent applications, US Utility patent application, and the International patent application, that comprise the Technology (“Licensor IP”), unless LICENSOR allows these applications to abandon or lapse, or otherwise fails to protect the Technology. Except as expressly provided for herein, nothing in this Agreement or in the conduct of the LICENSEE or LICENSOR shall be interpreted as preventing LICENSOR from granting to any other person a license for use of the Technology or from using the Technology in any manner whatsoever.

	2.	Any intellectual property resulting solely from LICENSEE’s work, know-how, or development that does not include nor rely upon the Technology, Licensor IP or jointly owned intellectual property, as described in this Agreement, shall be owned by LICENSEE (“Licensee IP”).

	3.	LICENSOR Improvements: The entire right and title to the Technology, whether or not patentable, and any patent applications or patents based thereon, which directly relate to and are not severable from Licensor IP and which are improvements thereto by LICENSOR, its employees or others acting solely on LICENSOR’s behalf shall be owned solely by LICENSOR (“Licensor Improvements”).

	4.	LICENSEE Improvements: Rights and title to improvements whether or not patentable, and any patent applications or patents based thereon, which directly relate to and are not severable from Licensor IP and which are improvements thereto by LICENSEE, its employees or its PARTNER, as defined by this Agreement, shall be owned by the LICENSEE (“Licensee Improvements”). In respect to such Licensee Improvements, LICENSOR grants LICENSEE a license to use the underlying intellectual property supporting any such improvement for so long as this Agreement remains in effect (including any renewal terms) and LICENSOR agrees to negotiate in good faith terms of license renewal after the end of the Term of this Agreement and any renewal terms. If LICENSEE develops any Licensee Improvements, LICENSEE will promptly provide LICENSOR with written notice of such Licensee Improvements to validate LICENSEE’S claim to Licensee Improvements.

Execution Copy

	5.	Joint Improvements: Rights and title to the Technology, whether or not patentable, and any patent applications or patents based thereon, which directly relate to and are not severable from Licensor IP and which are improvements thereto by both LICENSOR and LICENSEE shall be jointly owned intellectual property by LICENSOR and LICENSEE.

	6.	Improvements Assignment. LICENSEE and LICENSOR hereby represent that all PARTNERs, employees and other persons acting on its behalf in performing its obligations under this Agreement shall be obligated under a binding written agreement to assign, or as it shall direct, all Joint Improvements that include or rely on the Technology conceived or reduced to practice by such PARTNERs, employees or other persons acting on its behalf in accordance with this Agreement to the benefit of LICENSOR and LICENSEE.

	7.	Improvements Confidential Information. All Improvements shall constitute Confidential Information and shall be subject to the confidentiality provisions set forth in this Agreement.

	8.	Upon making any invention that does not include or rely upon the Technology neither the LICENSOR nor the LICENSEE (in either such case the “Inventor”) will have any obligation to share such information of the invention with the other Party or inform the other Party of said invention, and the Inventor retains unrestricted rights and ability to use, assign, license, seek patent and other forms of intellectual property protection related to said invention. For the avoidance of doubt, any such new invention, development, technology, and/or intellectual property belongs solely to the Inventor.

	9.	If any patent applications are filed seeking to protect any Joint Improvements (“Jointly Owned IP”), each of LICENSEE and LICENSOR shall be named as joint inventors.

	10.	Jointly Owned IP Rights. LICENSOR grants to LICENSEE an exclusive, non-sub-licensable, fully-paid, royalty-free, perpetual license to any Jointly Owned IP. Further, LICENSEE grants to LICENSOR an exclusive, non-sub-licensable, fully-paid, royalty-free, perpetual license to any Jointly Owned IP.

	11.	LICENSEE agrees to maintain and preserve the quality of the Technology, and to use the Technology in good faith and in a manner consistent with the uses approved herein. LICENSEE shall (a) ensure that all End Products and related materials under the Technology are developed, tested, promoted, manufactured and distributed in a professional manner in compliance with all generally accepted industry standards, and (b) comply in all material respects with any and all laws, rules and regulations that are applicable to the development, testing, promotion, manufacture and distribution of the End Products and such related materials.

Execution Copy

12. At all times during the term of this Agreement (including any renewal term) and thereafter, each Party undertakes not use or disclose and to otherwise keep confidential, any trade secrets or proprietary information, including, but not limited to the Technology and other intellectual property of the other Party (in each instance, the “Confidential Information”) except to the extent required to perform each Party’s respective obligations under this Agreement. Without limitation of the foregoing, each Party will hold the other Party’s Confidential Information in confidence and will (a) exercise the same degree of care, but no less than a reasonable degree of care, to prevent its disclosure as such Party would take to safeguard its own confidential or proprietary information, and (b) limit disclosure of the Confidential Information, including any notes, extracts, analyses or materials that would disclose the Confidential Information, solely to those of its employees who need to know the information for purposes of performing the respective Party’s obligations under this Agreement and who agree to keep such information confidential. Upon termination of this Agreement, each Party shall immediately return all Confidential Information to the other Party and further the LICENSOR shall have the right to conduct an on-site audit of the LICENSEE within three (3) business days of termination to ensure compliance with the terms of this Agreement, at LICENSOR’s expense.

13. This section does not apply to any information that: (a) is already lawfully in the receiving Party's possession (unless received pursuant to a nondisclosure agreement); (b) is or becomes generally available to the public through no fault of the receiving Party; (c) is disclosed to the receiving Party by a third party who may transfer or disclose such information without restriction; (d) is required to be disclosed by the receiving Party as a matter of law (provided that the receiving Party will use all reasonable efforts to provide the disclosing Party with prior notice of such disclosure and to obtain a protective order therefor, with all costs to be borne by the disclosing Party); (e) is disclosed by the receiving Party with the disclosing Party's approval; or (f) is independently developed by the receiving Party without any use of confidential information. In all cases, the receiving Party will use all reasonable efforts to give the disclosing Party ten (10) days' prior written notice of any disclosure of information under this Agreement. The Parties will maintain the confidentiality of all confidential and proprietary information learned pursuant to this Agreement for a period of ten (10) years from the date of termination of this Agreement

14. Employees, agents and/or representatives, if any, of either party, including LICENSEE’s PARTNER, who perform services for either party pursuant to this Agreement shall also be bound by the provisions of this Agreement.

7

Execution Cop

IN WITNESS WHEREOF, the parties hereto have executed this agreement intending to be legally bound as of ______________________ ________, ______.

“LICENCEE”

<<< Insert Name >>>

By: _________________________

<<< Insert Signatory Name >>>

“LICENSOR”

LEXARIA CANPHARM ULC

By: _________________________

<<< Insert Signatory Name >>>

“PARTNER”

<<< Insert Name >>>

By: ________________________

<<< Insert Signatory Name >>>

Document Metadata

Table of Contents

INTELLECTUAL PROPERTY LICENSE AGREEMENT

Document Metadata

	a)	Non-transferable: The license granted by this Section 1 may not be transferred or sublicensed by LICENSEE without LICENSOR’s written consent. However, LICENSEE has the right to sublicense its license to its Related Entities and/or to its Partner(s), without LICENSOR’s consent, provided that any sublicense issued by the LICENSEE to a Partner will be limited to one such sublicense per Country and the LICENSEE shall designate in writing to LICENSOR the name and address of the Partner for LICENSOR’s records. The Partner must agree in writing to all obligations of LICENSEE hereunder using the form provided in Exhibit E hereto, including those relating to confidentiality and non-use regarding both Parties’ Confidential Information. In the event that LICENSEE performs one or more of its obligations under this Agreement through any such Partner or Related Entity, then LICENSEE shall at all times be responsible for the performance by such Partner, or Related Entity, of LICENSEE’s obligations hereunder.

	b)	Other Products: The Parties agree that LICENSEE is not limited to production of the End Products defined herein, but that LICENSEE may develop, create and test new products and negotiate to obtain a license from the LICENSOR for new products subject to license availability from LICENSOR that are derived from or otherwise incorporate the Technology and such new products are only to be distributed and/or sold as permitted in compliance with all laws and licensing requirements within the applicable areas of the Territory and only after conditions applicable to a new license are met subject to Section 3 below.

	c)	Active Substances: Nothing in this Agreement infers applicability of the Technology by LICENSEE for enabling active substance incorporation and potentiation in LICENSEE’s End Products, other than those End Products derived from hemp and containing 0.3% or greater THC. LICENSEE is prohibited from developing, manufacturing or selling, whether directly or indirectly, including through its Partner, in its Territory, any End Product that is marketed as the following types of products: (i) a fat soluble vitamin product for vitamins A, D, E, and/or K, whether in their natural or synthetic forms, (ii) a Non-Steroidal Anti Inflammatory (“NSAID”) product which contains acetaminophen, ibuprofen, acetylsalicylic acid, diclofenac, indomethacin, and piroxicam, or substances similar thereto; or (iii) a nicotine or nicotine analog product and any other active substance not specifically named and allowed within this Agreement. Certain cannabinoids are thought to deliver anti-inflammatory benefits which benefits ARE permitted under this Agreement if delivered through the cannabinoids described as the End Products; and are only prohibited if delivered through NSAIDs’ as described in this Section.

	a)	In the Territory: Semi-Exclusive rights from the Effective Date until October 17, 2029 (the “Expiry Date”), allowing LICENSEE the semi-exclusive ability to continue to manufacture the End Products directly or through its Related Entity or Partner in the Territory for the balance of the term of this Agreement as per Section 4. Semi-Exclusive under this Agreement means that LICENSOR will not permit more than five (5) additional entities, including the LICENSOR and its related companies, to license the Technology for any End Products in the Territory.

	b)	LICENSOR’s Products: Except as set forth herein, the LICENSOR shall not be prohibited from licensing or similar arrangements with respect to the Technology. LICENSOR is expressly permitted to utilize its Technology on any basis it chooses, at any time, for producing and commercializing its own products.

	c)	Severance Fee: LICENSEE may elect to end sales of all of the End Products in a Product Line, at its sole discretion, with the payment of a severance fee (“Severance Fee”) as set forth in Exhibit C. If LICENSEE elects to end sales of all of the End Products in a Product Line, then any other licensing provision benefits for the LICENSEE with respect to the End Products also end at that time. Notwithstanding the foregoing, for a period of 6 months after such election is made, LICENSEE shall be permitted to sell End Products using the Technology in an attempt to sell all finished goods inventories pertaining to the Technology.

	d)	Labels and Advertising for LICENSEE, Related Entity or Partner Branded End Products: It is a condition of the license granted to the LICENSEE, that, subject to applicable law, on the label of each LICENSEE, Related Entity or Partner branded End Product that uses the Technology and/or on websites and/or social media describing each LICENSEE, Related Entity or Partner, as applicable, branded End Product shall be printed the POWERED BY LEXARIA BIOSCIENCE word trademark and the associated pinwheel & leaf design trademark and, if there is available space, the DehydraTech word xxxx (the “Lexaria Trademarks”), in the manner set forth in Exhibit “C” (the “Trademark License”).

	e)	Labels and Advertising for End Products Produced as a Contract Manufacturer by LICENSEE: LICENSEE must inform its clients in writing that LICENSOR must not be identified by such clients in their own marketing, advertising and packaging; nor may the Lexaria Trademarks be utilized in any form by any LICENSEE client. LICENSEE is permitted to communicate directly to its clients that the Technology will/can be used; the benefits of the Technology; and that LICENSOR does not object and does support the use of the Technology. LICENSOR reserves the right to demand compliance of the LICENSEE client and a cessation of the Copacker relationship between the LICENSEE and the LICENSEE client if this condition is breached.

	i)	LICENSEE agrees to maintain and preserve the quality of the Technology, and to use the Technology in good faith and in a manner consistent with the uses approved herein.

	ii)	LICENSEE shall (a) ensure that all End Products and related materials under the Technology are developed, tested, promoted, manufactured and distributed in a professional manner in compliance with all generally accepted industry standards, and (b) comply in all material respects with any and all laws, rules and regulations that are applicable to the development, testing, promotion, manufacture and distribution of the End Products and such related materials.

	iii)	LICENSOR shall have the right, upon 30 days’ written notice to LICENSEE, to require LICENSEE to provide LICENSOR, or LICENSOR’s nominee, with samples of the End Products for inspection or alternatively to allow for LICENSOR, or LICENSOR’s nominee, to attend the facility of LICENSEE for inspection of the End Products, all for the purposes of quality control.

	c)	Effect of Termination. Except as provided for in Section 5, LICENSEE’s payment obligations shall extinguish if this Agreement is terminated. If the Agreement expires without any renewal thereof, then LICENSEE must immediately cease and desist all utilization of the Technology for any purpose whatsoever including to manufacture, distribute or sell End Products, except that LICENSEE may continue to distribute and sell End Products until all finished goods and raw materials inventory that pertain to the Technology have been sold and LICENSEE shall be obligated to pay LICENSOR any related License Fees (as defined in section 5) for such sales. In any event, upon the natural future expiration of all pending and issued patents, as applicable, related to the Technology described herein the License Agreement shall expire and LICENSEE shall have no further payment obligations to LICENSOR.

	d)	Survivability. This agreement in its entirety survives and remains in force if either Party is acquired by any unknown third party. In the event that either Party negotiates any such sale or acquisition, then it shall form a part of any such sale or acquisition agreement, that this Agreement remains binding upon the third party that is the purchaser or acquirer.

	e)	Change of Control. In the event that LICENSEE is purchased as to 50.1% or more (a “Change of Control”) by any entity, this Agreement remains valid only in relation to those End Products that were in commercial production at the time of Change of Control by LICENSEE on its own behalf or as a contract manufacturer. This Agreement grants no rights to any third party to utilize the benefits of the Technology for any products other than the End Products described within.

	i)	LICENSEE is a corporation duly organized and in good standing under the laws xx Xxxxxxx, Xxxxxx;

	ii)	the execution, delivery and performance of this Agreement by LICENSEE has been duly authorized by all necessary action on the part of LICENSEE’s directors, managers and/or members and does not violate, conflict with, or require the consent or approval of any third party pursuant to any contract or legally binding obligation to which LICENSEE is subject;

	iii)	this Agreement constitutes the valid and binding obligation of LICENSEE enforceable against LICENSEE in accordance with its terms;

	iv)	LICENSEE is knowledgeable of the applicable laws and regulations of the Territory pertaining to the research, manufacture and distribution of the End Products, the use of cannabis and THC in the End Products and the use of the Technology and confirms that the LICENSEE is in compliance with such laws and regulations; and

	v)	before LICENSEE begins to distribute and sell the End Products which use the Technology, LICENSEE will possess all required licenses, permits or operating authorities necessary for its operations and the manufacture and sale of the End Products as cannabis products and will be in compliance with all applicable laws and regulations.

12)	Limitation of Liability. EXCEPT TO THE EXTENT OTHERWISE EXPRESSLY AGREED TO IN THIS AGREEMENT, NEITHER PARTY SHALL BE LIABLE TO THE OTHER PARTY FOR LOST PROFITS OR FOR ANY DIRECT, INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL, PUNITIVE OR EXEMPLARY DAMAGES IN CONNECTION WITH THIS AGREEMENT OR THE TRANSACTIONS CONTEMPLATED BY THIS AGREEMENT, HOWEVER CAUSED, UNDER ANY THEORY OF LIABILITY. THE FOREGOING SHALL NOT LIMIT LICENSEE’S LIABILITY FOR UNAUTHORIZED USE BY LICENSEE OF LICENSOR’S TECHNOLOGY.

13)	No Warranties. OTHER THAN THE EXPRESS WARRANTIES PROVIDED HEREIN, LICENSOR MAKES NO EXPRESS WARRANTIES OF MERCHANTABILITY OR FITNESS OR EFFICACY FOR A PARTICULAR PURPOSE OF THE TECHNOLOGY AND/OR ANY END PRODUCTS PRODUCED FROM SAID TECHNOLOGY AND SHALL NOT BE HELD LIABLE FOR PROFITABILITY OF TECHNOLOGY AND/OR END PRODUCTS OR HELD LIABLE UNDER ANY OTHER THEORY OF LIABILITY.

14)	Insurance. For the period of time required to cover its obligations hereunder, each Party will maintain third party provided insurance in types and amounts customary for the type of business it conducts, and in any event reasonably adequate to cover any liabilities arising out of its obligations hereunder. Further, LICENSEE will maintain product liability insurance reasonably adequate to cover any liabilities arising out of the sale and distribution of End Products. Upon a Party’s request, the other Party will provide to the requesting Party a certificate of insurance showing that such insurance is in place, which certificate shall demonstrate the amounts, exclusions and deductibles of such insurance coverage. Each Party shall notify the other Party in writing no less than thirty (30) days prior to the cancellation, termination or modification of the insurance coverage(s) described in the notifying Party’s insurance certificate(s). Nothing in this Section shall in any way be construed to limit the liability of a Party under this Agreement.

15)	Compliance with Laws. In connection with this Agreement, LICENSEE agrees to comply with all applicable laws, statutes and ordinances of any state, city, provincial, county or local governmental authority and each regulatory body with jurisdiction in which the LICENSEE sells End Products, that may be applicable to LICENSEE, its activities under this Agreement or the End Products.

16)	Conformance with Regulations. The Parties acknowledge and agree that this Agreement, and the licensing of the Technology, is neither intended to convey any ownership interest in LICENSEE to LICENSOR nor grant LICENSOR any control over LICENSEE. In the event that any government body indicates otherwise with regards to this Agreement or any portion thereof, then the Parties shall promptly negotiate in good faith for a period of forty-five (45) days to modify this Agreement in order to conform to any guidance proffered by that authority. In the event the Parties cannot reach an agreement within forty-five (45) days’ notice by any authorized government body that this Agreement must be reformed, this Agreement shall terminate pursuant to Section 4 above, and the Parties shall thereafter have no further obligation to each other hereunder.

17)	Employees; Agents; Representatives. Employees, agents and/or representatives, if any, of either Party, including LICENSEE’s Partner, who perform services for either Party pursuant to this Agreement shall also be bound by the provisions of this Agreement.

18)	Relationship of Parties. The legal relationship of the Parties is exclusively that of licensor and licensee and no employer-employee, principal-agent, partnership, franchise, agency, joint venture or other legal relationship is created by this Agreement. Neither Party shall have the authority to enter into any contracts on behalf of the other Party.

19)	Successors; Assignment; Binding Agreement. Except as otherwise provided in this Agreement, LICENSEE may not assign or transfer its rights or delegate its obligations under this Agreement without LICENSOR’s prior written consent, provided that in the event that a person acquires all of the issued and outstanding shares of LICENSEE, or all or substantially all of the assets of the LICENSEE, the LICENSEE shall be entitled to transfer all of its rights and obligations relating to this Agreement to such person, and such person is entitled to all of the rights and benefits of the LICENSEE under this Agreement with respect to End Products then being sold or produced by the LICENSEE on its own behalf or as a contract manufacturer. LICENSOR may freely assign this Agreement or any rights under this Agreement or delegate any duties under this Agreement without LICENSEE’s consent provided that the assignee agrees to assume all of LICENSOR’s obligations and liabilities hereunder. This Agreement inures to the benefit of, and shall be binding upon, the successors and assigns of the parties to this Agreement. This Agreement and all of its provisions and conditions are for the sole and exclusive benefit of the Parties and their respective successors and permitted assigns.

20)	Modifications and Waivers. This Agreement may be amended only by a written agreement signed by both Parties. With regard to any power, remedy or right provided in this Agreement, no waiver or extension of time shall be effective unless expressly contained in writing signed by the waiving Party, no alteration, modification or impairment shall be implied by reason of any previous waiver, extension of time, delay or omission in exercise or other indulgence, and waiver by any Party of the time for performance of any act or condition hereunder does not constitute a waiver of the act or condition itself.

22)	Entire Agreement. This Agreement, including the attached exhibits, constitutes the entire agreement of the Parties hereto relating to the subject matter hereof and there are no written or oral terms or representations made by either Party other than those contained herein.

23)	Publicity. Without the prior written consent of the other Party, neither Party shall disclose the terms and conditions of this Agreement, except disclosure may be made as is reasonably necessary to the disclosing Party's bankers, attorneys, or accountants or except as may be required by law. The LICENSOR agrees not to use the LICENSEE’s corporate name or product names, in any form, in any press release or other publication, without permission from the LICENSEE, except as provided below. The Parties understand and agree that LICENSOR may be compelled by stock exchanges, securities commission regulators or other government authorities to publicly disclose the signing of said License Agreement naming both Parties. If LICENSOR is compelled by stock exchanges, securities commission regulators or other government authorities to publicly disclose the signing of said License Agreement, LICENSOR will share its planned announcement with LICENSEE beforehand for LICENSEE’s review and approval, not to be unreasonably withheld or delayed, and it will also ensure that no compromise of the LICENSEE’s existing secret processes or intellectual property, nor of LICENSEE`S personal or private information occurs through this announcement.

24)	Expenses. Each Party to this Agreement shall bear all of its own expenses in connection with the execution, delivery and performance of this Agreement and the transactions contemplated hereby, including without limitation all fees and expenses of its agents, representatives, counsel and accountants.

27)	Attorneys’ Fees. In the event of any dispute between the parties arising out of this Agreement, the prevailing Party shall be entitled, in addition to any other rights and remedies it may have, to recover its reasonable attorneys’ fees and costs.

28)	No Interpretation Against Drafter. Each Party participated in the negotiation and drafting of this Agreement, assisted by such legal and tax counsel as it desired, and contributed to its revisions. Any ambiguities with respect to any provision of this Agreement will be construed fairly as to all Parties and not in favor of or against any Party. All pronouns and any variation thereof will be construed to refer to such gender and number as the identity of the subject may require. The terms “include” and “including” indicate examples of a predicate word or clause and not a limitation on that word or clause.

	12.	At all times during the term of this Agreement (including any renewal term) and thereafter, each Party undertakes not use or disclose and to otherwise keep confidential, any trade secrets or proprietary information, including, but not limited to the Technology and other intellectual property of the other Party (in each instance, the “Confidential Information”) except to the extent required to perform each Party’s respective obligations under this Agreement. Without limitation of the foregoing, each Party will hold the other Party’s Confidential Information in confidence and will (a) exercise the same degree of care, but no less than a reasonable degree of care, to prevent its disclosure as such Party would take to safeguard its own confidential or proprietary information, and (b) limit disclosure of the Confidential Information, including any notes, extracts, analyses or materials that would disclose the Confidential Information, solely to those of its employees who need to know the information for purposes of performing the respective Party’s obligations under this Agreement and who agree to keep such information confidential. Upon termination of this Agreement, each Party shall immediately return all Confidential Information to the other Party and further the LICENSOR shall have the right to conduct an on-site audit of the LICENSEE within three (3) business days of termination to ensure compliance with the terms of this Agreement, at LICENSOR’s expense.

	13.	This section does not apply to any information that: (a) is already lawfully in the receiving Party's possession (unless received pursuant to a nondisclosure agreement); (b) is or becomes generally available to the public through no fault of the receiving Party; (c) is disclosed to the receiving Party by a third party who may transfer or disclose such information without restriction; (d) is required to be disclosed by the receiving Party as a matter of law (provided that the receiving Party will use all reasonable efforts to provide the disclosing Party with prior notice of such disclosure and to obtain a protective order therefor, with all costs to be borne by the disclosing Party); (e) is disclosed by the receiving Party with the disclosing Party's approval; or (f) is independently developed by the receiving Party without any use of confidential information. In all cases, the receiving Party will use all reasonable efforts to give the disclosing Party ten (10) days' prior written notice of any disclosure of information under this Agreement. The Parties will maintain the confidentiality of all confidential and proprietary information learned pursuant to this Agreement for a period of ten (10) years from the date of termination of this Agreement

	14.	Employees, agents and/or representatives, if any, of either party, including LICENSEE’s PARTNER, who perform services for either party pursuant to this Agreement shall also be bound by the provisions of this Agreement.