Adhesive bonding definition

Adhesive bonding means the joining together of two or more metal parts, such as the parts of a honeycomb core. The surfaces to be bonded are first coated with an adhesive bonding primer to promote adhesion and protect from subsequent corrosion. Structural adhesives are applied as either a thin film or as a paste, and can be oven cured or cured in an autoclave.
Sample 1Sample 2Sample 3
Adhesive bonding means the joining together of two or more metal parts, such as the parts of a honeycomb core. The surfaces to be bonded are first coated with an adhesive bonding primer to promote adhesion and protect from
Sample 1

Examples of Adhesive bonding in a sentence

  • Two examples of these satellite doctrines are the problem of the hostile audience and “fighting words.” Similarly, there are a series of doctrines that connect to obscenity – offensive speech, the zoning of adult-themed speech, and the special concern for protecting children.Time, place and manner.

  • Creep, Adhesive bonding, Fastener, Modelling, Experimental investigations.

  • Adhesive bonding of denture base resins to plastic denture teeth.

  • Adhesive bonding involves joining together two or more metal or nonmetal components.

  • Adhesive bonding is seen to be the key to realize weight saving hybrid structures.

  • The bottom crush plate is marked to ensure that the applied load is centered on the sample.(2) The crush plate assemblies havean average angular rigidity (about axes normal to the direction of crush) of at least 1017 Nm/deg (750 ft-lb/deg), overthe range of 0 to 203 Nm (0 to 150 ft-lb) applied torque.§ 587.16 Adhesive bonding procedure.Immediately before bonding, alu- minum sheet surfaces to be bonded are thoroughly cleaned using a suitable solvent, such as 1-1-1 Trichloroethane.

  • Adhesive bonding provides a more uniform and efficient load transfer into the repair patch and reduces the risk of high stress concentrations caused by additional holes necessary for riveted repairs.

  • Adhesive bonding offers capabilities such as large area bonding, bonding of dissimilar materials of varying thicknesses, prevention of galvanic corrosion while bonding dissimilar metals due to the insulating properties of adhesives, lighter weight than when joined with mechanical fasteners, and the use of less or no heat to create an adhesive joint eliminating any thermal distortion or residual stresses generally caused by heating [4].

  • Adhesive bonding is a widespread structural joining technique as well.

  • Adhesive bonding provides several advantages compared to conventional methods likewelding, riveting, and connections with screws or bolts.

Related to Adhesive bonding

  • Adhesive means any chemical substance that is applied for the purpose of bonding two surfaces together other than by mechanical means.

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Aerosol adhesive means any adhesive packaged as an aerosol product in which the spray mechanism is permanently housed in a nonrefillable can designed for hand-held application without the need for ancillary hoses or spray equipment. Aerosol adhesives include special purpose spray adhesives, mist spray adhesives, and web spray adhesives.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Polyolefin Adhesive means an aerosol adhesive designed to bond polyolefins to substrates.

  • Plastic means material which contains as an essential ingredient a high polymer such as polyethylene terephthalate, high density polyethylene, Vinyl, low density polyethylene, polypropylene, polystyrene resins, multi-materials like acrylonitrile butadiene styrene, polyphenylene oxide, polycarbonate, Polybutylene terephthalate;

  • Web spray adhesive means any aerosol adhesive that is not a mist spray or special purpose spray adhesive.

  • Chemical Storage Facility means a building, portion of a building, or exterior area adjacent to a building used for the storage of any chemical or chemically reactive products.

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.

  • Triage facility means a short-term facility or a portion

  • Slug loading means any pollutant, including oxygen demanding pollutants, released in a discharge at a flow rate and/or pollutant concentration as to cause interference in the POTW.

  • Storage Facility means a facility used for the stocking of natural gas and owned and/or operated by a natural gas undertaking, including the part of LNG facilities used for storage but excluding the portion used for production operations, and excluding facilities reserved exclusively for transmission system operators in carrying out their functions;

  • Mist spray adhesive means any aerosol which is not a special purpose spray adhesive and which delivers a particle or mist spray, resulting in the formation of fine, discrete particles that yield a generally uniform and smooth application of adhesive to the substrate.

  • Plate means the license plate, including renewal decals, if any, issued for a vehicle registered under the plan by the base jurisdiction.

  • recyclable waste means the waste that is commonly found in the MSW. It is also called as "Dry Waste". These include many kinds of glass, paper, metal, plastic, textiles, electronics goods, etc.

  • Recycling facility means equipment used by a trade or business solely for recycling:

  • Cannabis processing facility means a person that:

  • Recyclables means Solid Waste that may be reclaimed and/or processed and used in the production of raw materials or products.

  • Coating means a material applied onto or impregnated into a substrate for protective, decorative, or functional purposes. Such materials include, but are not limited to, paints, varnishes, sealers, and stains.

  • Label means a display of written, printed, or graphic matter upon the immediate container of any article. A requirement made by or under authority of this chapter that any word, statement, or other information appear on the label shall not be considered to be complied with unless such word, statement, or other information also appears on the outside container or wrapper, if any, of the retail package of such article or is easily legible through the outside container or wrapper.

  • Recyclable Materials means materials that are separated from mixed municipal solid waste for the purpose of recycling or composting, including paper, glass, plastics, metals, automobile oil, batteries, source-separated compostable materials, and sole source food waste streams that are managed through biodegradative processes. Refuse-derived fuel or other material that is destroyed by incineration is not a recyclable material. (Minn. Stat. § 115A.03, Subd. 25a)

  • Atmosphere-supplying respirator means a respirator that supplies the respirator user with breathing air from a source independent of the ambient atmosphere, and includes supplied-air respirators (SARs) and self-contained breathing apparatus (SCBA) units.

  • Air dried coating means a coating that is dried by the use of air or forced warm air at temperatures up to 1940F (900C).

  • Container means any portable device in which a material is stored, transported, treated, disposed of, or otherwise handled.

  • Mine drainage means any drainage, and any water pumped or siphoned, from an active mining area or a post-mining area. The abbreviation “ml/l” means milliliters per liter.

  • Storm drain or “storm sewer” means a sewer which carries storm and surface waters and drainage but excludes sewage and industrial wastes, other than unpolluted cooling water.