Appropriate standards definition

Appropriate standards means densities and requirements with respect to minimum floor areas, building setbacks, rear and side yards, parking, the percentage of a lot that may be occupied by a structure, amenities, and other requirements imposed on residential lots pursuant to the zoning authority which contribute significantly to the economic feasibility of producing housing at the lowest possible cost given economic and environmental factors, the public health and safety, and the need to facilitate the development of housing affordable to persons and families of low or moderate income, as defined in Section 50093 of the Health and Safety Code, and to persons and families of lower income, as defined in Section 50079.5 of the Health and Safety Code. However, nothing in this section shall be construed to enlarge or diminish the authority of a city, county, or city and county to require a developer to construct this housing.
Sample 1Sample 2Sample 3
Appropriate standards in subsection (3) means sector-recognised standards.
Sample 1Sample 2Sample 3
Appropriate standards requirement means that the State must demonstrate that its regulation is a reasonable and necessary conservation measure, [citations omitted] and that its application to the Indians is necessary in the interest of conservation. 420 U.S. at 207. (emphasis in original)
Sample 1

Examples of Appropriate standards in a sentence

  • Appropriate standards for health and safety in work and training situations will be maintained.

  • Appropriate standards of hygiene must be observed by all em- ployees handling a new chemical sub- stance in manufacturing, processing, or transfer operations.

  • Appropriate standards of hygiene that limit exposure must be observed by all employees handling wet mixtures that contain new chemical substances.(iii) Work practices.

  • Appropriate standards of dress and behavior will be observed at all times in the Licensed Space.

  • Appropriate standards shall be implemented to ascertain the progress of students.

  • Appropriate standards of health and safety and a drug free workplace will be maintained.

  • Appropriate standards ofhygiene that limit exposure must be observed by all employees handling wet mixtures that contain new chemical substances.(iii) Work practices.

  • Appropriate standards of conduct and ethical behaviour are fundamental to the preservation of the Company’s reputation and the success of its operations.

  • Appropriate standards will be met for construction and installation, and all applicable safety procedures will be followed during and after installation.

  • Appropriate standards of civility should be used when using e-mail and other messaging services to communicate with other staff members, students or any other message recipients.


More Definitions of Appropriate standards

Appropriate standards means densities and requirements with respect to minimum floor areas, building setbacks, rear and side yards, parking, the
Sample 1

Related to Appropriate standards

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • harmonised standard means harmonised standard as defined in point (c) of point 1 of Article 2 of Regulation (EU) No 1025/2012;

  • Quality Assurance Program means the overall quality program and associated activities including the Department’s Quality Assurance, Design-Builder Quality Control, the Contract’s quality requirements for design and construction to assure compliance with Department Specifications and procedures.

  • Minimum Standards means standards of practice that interpret the legal definition of nursing as well as provide criteria against which violations of the law can be determined.

  • Ascertainable standard means a standard relating to an individual's health, education, support, or maintenance within the meaning of section 2041(b)(1)(A) or 2514(c)(1) of the Internal Revenue Code.

  • Uniform standard means a standard adopted by the commission for a product line, pursuant to article VII of this compact, and shall include all of the product requirements in aggregate; provided, that each uniform standard shall be construed, whether express or implied, to prohibit the use of any inconsistent, misleading, or ambiguous provisions in a product and the form of the product made available to the public shall not be unfair, inequitable, or against public policy as determined by the commission.

  • State Standard Agreement means the form used by the State to enter into agreements with other parties. Several originally signed, fully executed versions of the State Standard Agreement, together with the integrated Contract Documents, shall each represent the Agreement as an individual “Contract Counterpart.”

  • Standard operating procedure means a formal written procedure offi- cially adopted by the plant owner or operator and available on a routine basis to those persons responsible for carrying out the procedure.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Quality Assurance means a systematic procedure for assessing the effectiveness, efficiency, and appropriateness of services.

  • auditing standards means auditing standards as defined in National Instrument 52-107 Acceptable Accounting Principles and Auditing Standards;

  • Applicable Accounting Standards means Generally Accepted Accounting Principles in the United States, International Financial Reporting Standards or such other accounting principles or standards as may apply to the Company’s financial statements under United States federal securities laws from time to time.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Uniform Network Code means the uniform network code as defined in Standard Special Condition A11(6) of National Grid’s transporters licence, as such code may be amended from time to time in accordance with the terms thereof.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Standard Operating Procedures or “SOP” means the procedures as specified in the Annexes or Attachments to the relevant Schedules;

  • European standard means a standard adopted by the European Committee for Standardisation, the European Committee for Electrotechnical Standardisation or the European Telecommunications Standards Institute and made available for public use;

  • Generally applicable environmental radiation standards means standards issued by the U.S. Environmental Protection Agency (EPA) under the authority of the Atomic Energy Act of 1954, as amended, that impose limits on radiation exposures or levels, or concentrations or quantities of radioactive material, in the general environment outside the boundaries of locations under the control of persons possessing or using radioactive material.

  • Technical Standards means the technical standards set out in paragraph 2.4 of the Order Form;

  • Corrective Measure means a measure as defined in Article 3, point 16, of Regulation (EU) 2019/1020;

  • Common Reporting Standard means the standard for automatic exchange of financial account information in tax matters (which includes the Commentaries), developed by the OECD, with G20 countries;