Automatic Point definition

Automatic Point means a Recording Point which is not a Manual Point and based
Sample 1Sample 2Sample 3

Examples of Automatic Point in a sentence

  • An Automatic Point will not ordinarily be converted to a Manual Point on a permanent basis, but if it is, then Part G of the Network Code applies (see paragraph 6.1).

  • An Automatic Point that fails temporarily is still “usually” monitored automatically and its category does not change.

  • Network support and/or monitoring Response: Fluke and some small amount of Solarwinds.

  • Several hundred tiepoints between the images are then collected using Automatic Point Measurement (APM), followed by an adjustment to validate the tiepoint measures and obtain consistent ground coordinate measurements.

  • The residue after centrifuging in Zn Br2 was mounted on slides for light microscopy and microphotography.The Automatic Point Scan was used to count a total of 350 particulate organic matter and palynomorphs to determine their relative abundance in percentages at each depth (Appendix 1) (Fig.

  • However, Uganda’s children face distinct challenges that go beyond the HIV/AIDS crisis.

  • How to determine and record the geographic coordinates of the project boundary, including boundaries of strata if any, for each of the corresponding A/R and AGR VPAs. d.

  • The proportionate mineral compositions were recorded in a PELCON Automatic Point Counter due to for a point-counter analysis as recommended by Chayes (1949).

  • Marcum, “Unstructured Grid Generation Using Automatic Point Insertion and Local Reconnection”, In: Thompson, J.

  • All Automatic Point Controllers (including ancillaries) used by Yarra Trams shall comply with YarraTrams’ – Tram Signal Controller Standard Document Number SIG – 002 – 1.0 –2017.

Related to Automatic Point

  • Automatic firearm means any firearm designed or specially adapted to fire a succession of cartridges with a single function of the trigger.

  • Automatic identification device means a device, such as a reader or interrogator, used to retrieve data encoded on machine-readable media.

  • Automatic Renewal Terms with TIPS Members Vendor agrees that no TIPS Sale may incorporate an "Automatic Renewal" clause that exceeds month to month terms with which the TIPS Member must comply. All renewal terms incorporated into a TIPS Sale Supplemental Agreement shall only be valid and enforceable when Vendor received written confirmation of acceptance of the renewal term from the TIPS Member for the specific renewal term. The purpose of this clause is to avoid a TIPS Member inadvertently renewing a Supplemental Agreement during a period in which the governing body of the TIPS Member has not properly appropriated and budgeted the funds to satisfy the Agreement renewal. Any TIPS Sale Supplemental Agreement containing an "Automatic Renewal" clause that conflicts with these terms is rendered void and unenforceable. If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested negotiations as redline edits for TIPS consideration. Does Vendor agree? Yes, Vendor agrees Certification Regarding "Indemnity" Terms with TIPS Members Texas and other jurisdictions restrict the ability of governmental entities to indemnify others. Vendor agrees that if any "Indemnity" provision which requires the TIPS Member to indemnify Vendor is included in any sales agreement/contract between Vendor and a TIPS Member, that clause must either be stricken or qualified by including that such indemnity is only permitted, "to the extent permitted by the laws and constitution of [TIPS Member's State]" unless the TIPS Member expressly agrees otherwise. Any TIPS Sale Supplemental Agreement containing an "Indemnity" clause that conflicts with these terms is rendered void and unenforceable. If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested negotiations as redline edits for TIPS consideration. Does Vendor agree? Yes, Vendor agrees Certification Regarding "Arbitration" Terms with TIPS Members Vendor agrees that if any "Arbitration" provision is included in any TIPS Sale agreement/contract between Vendor and a TIPS Member, that clause may not require that the arbitration is mandatory or binding. Vendor agrees that if any "Arbitration" provision is included in any TIPS Sale agreement/contract between Vendor and a TIPS Member, that clause provides for only voluntary and non-binding arbitration unless the TIPS Member expressly agrees otherwise. Any TIPS Sale Supplemental Agreement containing a “Arbitration” clause that conflicts with these terms is rendered void and unenforceable. If Vendor disagrees, after this solicitation legally closes and TIPS begins evaluating Vendor's file, TIPS will provide Vendor with a draft Word Document version of the Vendor Agreement and will be instructed to include all requested negotiations as redline edits for TIPS consideration. Does Vendor agree? Yes, Vendor agrees

  • Automatic Termination shall have the meaning set forth in Section 2.3.2.

  • Automatic Early Termination provision of Section 6(a) will not apply to Party A and will not apply to Party B.

  • Automatic Conversion Date has the meaning specified in Section 13.14(a).

  • Automatic Route Selection or “ARS” means a service feature associated with a specific grouping of lines that provides for automatic selection of the least expensive or most appropriate transmission facility for each call based on criteria programmed into the system.

  • Automatic Location Identification Gateway or "ALI Gateway" is a computer facility into which CLEC delivers Automatic Location Identification (ALI) data for CLEC Customers. Access to the ALI Gateway will be via a dial-up modem using a common protocol. "Automatic Number Identification" or "ANI" is the Billing telephone number associated with the access line from which a call originates. ANI and Calling Party Number (CPN) usually are the same number. "Automatic Route Selection" or "ARS" is a service feature that provides for automatic selection of the least expensive or most appropriate transmission facility for each call based on criteria programmed into a circuit Switch routing table or system.

  • Automatic Investment Plan means a program in which regular periodic purchases (or withdrawals) are made automatically in (or from) investment accounts in accordance with a predetermined schedule and allocation. An Automatic Investment Plan includes a dividend reinvestment plan.

  • Automatic Conversion means the irrevocable and automatic release of all of the Company’s obligations under the Securities (other than the CSO Obligations, if any) in consideration of the Company’s issuance of the Conversion Shares at the Conversion Price to the Conversion Shares Depository (on behalf of the Holders and Beneficial Owners of the Securities) or to the relevant recipient of such Conversion Shares, all in accordance with the terms of the Securities.

  • Automatic Location Identification (“ALI”) means a feature that provides the caller’s telephone number, address and the names of the Emergency Response agencies that are responsible for that address.

  • Automatic exposure control means a device which automatically controls one or more technique factors in order to obtain at a preselected location(s) a required quantity of radiation (See also "Phototimer").

  • Automatic Exercise Date means, with respect to an Option or a Stock Appreciation Right, the last business day of the applicable Option Term or Stock Appreciation Right Term that was initially established by the Administrator for such Option or Stock Appreciation Right (e.g., the last business day prior to the tenth anniversary of the date of grant of such Option or Stock Appreciation Right if the Option or Stock Appreciation Right initially had a ten-year Option Term or Stock Appreciation Right Term, as applicable).

  • Automatic disconnect means a device that when triggered, conductively separates the electric energy sources from the rest of the high voltage circuit of the electric power train.

  • Automatic Exercise Applicable; and means that for each Expiration Date, a number of Warrants equal to the Daily Number of Warrants for such Expiration Date will be deemed to be automatically exercised at the Expiration Time on such Expiration Date.

  • Automatic Exchange has the meaning ascribed to such term in the Share Exchange Agreement;

  • Change in Control Protection Period means the period beginning on the date of the consummation of the Change in Control and ending on the first anniversary of such Change in Control.

  • Automatic Number Identification or "ANI" means a Feature Group D signaling parameter which refers to the number transmitted through a network identifying the billing number of the calling party.

  • Automatic Renewal Term has the meaning set forth in Section 10(a) hereof.

  • DoD recognized unique identification equivalent means a unique identification method that is in commercial use and has been recognized by DoD. All DoD recognized unique identification equivalents are listed at http://www.acq.osd.mil/dpap/pdi/uid/iuid_equivalents.html.

  • SOFR Index Cessation Effective Date means, in relation to a SOFR Index Cessation Event, the date on which the Federal Reserve Bank of New York (or any successor administrator of the daily Secured Overnight Financing Rate) ceases to publish the daily Secured Overnight Financing Rate, or the date as of which the daily Secured Overnight Financing Rate may no longer be used;

  • Cooling Off Period means the duration of time counted from the date when the direct seller and the direct selling entity enter into an agreement and ending with the date on which the contract is to be performed and within which direct seller may repudiate the agreement without being subject to penalty for breach of contract.

  • OBFR Index Cessation Effective Date means, in relation to an OBFR Index Cessation Event, the date on which the Federal Reserve Bank of New York (or any successor administrator of the daily Overnight Bank Funding Rate) ceases to publish the daily Overnight Bank Funding Rate or the date as of which the daily Overnight Bank Funding Rate may no longer be used;

  • Fixed-term employment means the engagement of an employee on the basis of a written contract of employment for a fixed period:

  • €STR Index Cessation Effective Date means, in respect of an €STR Index Cessation Event, the first date on which €STR is no longer provided by the European Central Bank (or any successor administrator of €STR), as determined by the Issuer and notified by the Issuer to the Calculation Agent;

  • Continuing care retirement community means a residential