Average Test Capacity definition

Average Test Capacity has the meaning ascribed to it in Section 15.6(e).
Sample 1Sample 2Sample 3
Average Test Capacity has the meaning ascribed to it in Section 15.6(d). “Bank Act” means the Bank Act (Canada), as amended from time to time. “Benchmark(NG)” has the meaning given to it in Exhibit J.
Sample 1
Average Test Capacity has the meaning ascribed to it in Section 15.6(d). “Bank Act” means the Bank Act (Canada), as amended from time to time. “BTU” means British thermal unit (HHV).
Sample 1Sample 2

Examples of Average Test Capacity in a sentence

  • For purposes of calculating the Average Test Capacity in this Section 15.6, the Electricity output from each hour shall not exceed a maximum amount equal to the Contract Capacity multiplied by one hour.

  • If the Further Capacity Check Test shows that the Average Test Capacity was less than one hundred percent (100%) of the Reference Seasonal ICAP, then the Capacity Reduction Factor for purposes of Exhibit J shall be reduced as set out below, effective on the date of the Capacity Confirmation in relation to the Further Capacity Check Test.

  • If the Further Capacity Check Test shows that the Average Test Capacity was less than 100% of the Contract Capacity, then the Capacity Reduction Factor for the Fuel used during the test for purposes of Exhibit J shall be reduced as set out below, effective on the date of the Capacity Confirmation in relation to the Further Capacity Check Test.

  • If the Further Capacity Check Test shows that the Average Test Capacity was less than 100% of the Contract Capacity, then the Capacity Reduction Factor for purposes of Exhibit J shall be reduced as set out below, effective on the date of the Capacity Confirmation in relation to the Further Capacity Check Test.

  • I also critique past studies of excreta flows that typically utilize epidemiological methods that are too technical for local organizations, or miss fine-grained practices and variations in informal settlements.

  • If the Further Capacity Check Test shows that the Average Test Capacity was between eighty percent (80%) and one hundred percent (100%) of the Contract Capacity then the Capacity Reduction Factor for purposes of Exhibit J shall be reduced as set out below, effective on the date of the Capacity Confirmation in relation to the Further Capacity Check Test.


More Definitions of Average Test Capacity

Average Test Capacity as calculated pursuant to sub-section (e)):‌‌‌
Sample 1

Related to Average Test Capacity

  • Class D Coverage Tests means the Class D Interest Coverage Test and the Class D Par Value Test.

  • Maximum Weighted Average Life Test means a test that will be satisfied on any date of determination if the Weighted Average Life of all Eligible Collateral Obligations included in the Collateral is less than or equal to 5.50 years.

  • Weighted Average Life Test means a test that is satisfied at any such time if the Weighted Average Life as calculated on the date of determination is less than or equal to 5.5 years.

  • Class C Coverage Tests means the Class C Interest Coverage Test and the Class C Par Value Test.

  • Coverage Test means each of the Class A/B Par Value Test, the Class A/B Interest Coverage Test, the Class C Par Value Test, the Class C Interest Coverage Test, the Class D Par Value Test, the Class D Interest Coverage Test, the Class E Par Value Test and the Class E Interest Coverage Test.

  • DNS test Means one non-­‐recursive DNS query sent to a particular “IP address” (via UDP or TCP). If DNSSEC is offered in the queried DNS zone, for a query to be considered answered, the signatures must be positively verified against a corresponding DS record published in the parent zone or, if the parent is not signed, against a statically configured Trust Anchor. The answer to the query must contain the corresponding information from the Registry System, otherwise the query will be considered unanswered. A query with a “DNS resolution RTT” 5 times higher than the corresponding SLR, will be considered unanswered. The possible results to a DNS test are: a number in milliseconds corresponding to the “DNS resolution RTT” or, undefined/unanswered.

  • Nominal Rated Capability means the nominal maximum rated capability in megawatts of a Transmission Interconnection Customer’s Customer Facility or the nominal increase in transmission capability in megawatts of the Transmission System resulting from the interconnection or addition of a Transmission Interconnection Customer’s Customer Facility, as determined in accordance with pertinent Applicable Standards and specified in the Interconnection Service Agreement.

  • Minimum Weighted Average Spread Test means a test that will be satisfied on any day if the Weighted Average Spread of all Eligible Collateral Obligations included in the Collateral on such day is equal to or greater than 5.5%

  • Interest Coverage Test means the Class A/B Interest Coverage Test, the Class C Interest Coverage Test, the Class D Interest Coverage Test and the Class E Interest Coverage Test.

  • Rated Capacity means the Average Daily Flow for which the Works are approved to handle;

  • Coverage Tests means each of the Overcollateralization Ratio Test and the Interest Coverage Ratio Test.

  • Excess Capacity means volume or capacity in a duct, conduit, or support structure other than a utility pole or anchor which can be used, pursuant to the orders and regulations of the Commission, for a pole attachment.

  • Class A/B Coverage Tests means the Class A/B Interest Coverage Test and the Class A/B Par Value Test.

  • Final RTO Unforced Capacity Obligation means the capacity obligation for the PJM Region, determined in accordance with RAA, Schedule 8. Financial Close:

  • Daily Unforced Capacity Obligation means the capacity obligation of a Load Serving Entity during the Delivery Year, determined in accordance with Reliability Assurance Agreement, Schedule 8, or, as to an FRR entity, in Reliability Assurance Agreement, Schedule 8.1. Day-ahead Congestion Price: “Day-ahead Congestion Price” shall mean the Congestion Price resulting from the Day-ahead Energy Market. Day-ahead Energy Market:

  • Contracted Capacity means the capacity (in MW AC) contracted with MSEDCL for supply by the successful bidder at the Delivery Point from the Solar Power Project.

  • Minimum Weighted Average Coupon Test means a test that will be satisfied on any Measurement Date if the Weighted Average Coupon equals or exceeds 5.0%.

  • RDDS test Means one query sent to a particular “IP address” of one of the servers of one of the RDDS services. Queries shall be about existing objects in the Registry System and the responses must contain the corresponding information otherwise the query will be considered unanswered. Queries with an RTT 5 times higher than the corresponding SLR will be considered as unanswered. The possible results to an RDDS test are: a number in milliseconds corresponding to the RTT or undefined/unanswered.

  • Potential electrical output capacity means, with regard to a unit, 33 per- cent of the maximum design heat input of the unit.

  • Average monthly discharge limitation means the highest allowable average of “daily discharges” over a calendar month, calculated as the sum of all “daily discharges” measured during a calendar month divided by the number of “daily discharges” measured during that month.

  • Class A/B Interest Coverage Test means the test which will apply as of any Measurement Date occurring on and after the Determination Date immediately preceding the second Payment Date and which will be satisfied on such Measurement Date if the Class A/B Interest Coverage Ratio is at least equal to 120.0 per cent.

  • Class C Interest Coverage Test means the test which will apply as of any Measurement Date occurring on and after the Determination Date immediately preceding the second Payment Date and which will be satisfied on such Measurement Date if the Class C Interest Coverage Ratio is at least equal to 110.0 per cent.

  • Average Monthly Limit means the maximum allowable "Average Monthly Concentration" as defined in Section 22a-430-3(a) of the RCSA when expressed as a concentration (e.g. mg/l); otherwise, it means "Average Monthly Discharge Limitation" as defined in Section 22a-430-3(a) of the RCSA.

  • Average Excess Availability means, with respect to any period, the sum of the aggregate amount of Excess Availability for each Business Day in such period (calculated as of the end of each respective Business Day) divided by the number of Business Days in such period.

  • Available RP Capacity Amount means the amount of Restricted Payments that may be made at the time of determination pursuant to Sections 6.04(a)(ii)(D), (a)(vii) and (a)(x) minus the aggregate amount of the Available RP Capacity Amount utilized by the Borrower or any Restricted Subsidiary to (a) make Investments pursuant to Section 6.06(q)(ii), (b) make Restricted Debt Payments pursuant to Section 6.04(b)(iv)(B) or (c) incur Indebtedness pursuant to Section 6.01(ll).

  • Volume Weighted Average Price means, for any security as of any date, the daily dollar volume-weighted average price for such security on the Primary Market as reported by Bloomberg through its “Historical Prices – Px Table with Average Daily Volume” functions, or, if no dollar volume-weighted average price is reported for such security by Bloomberg, the average of the highest closing bid price and the lowest closing ask price of any of the market makers for such security as reported in the "pink sheets" by Pink Sheets LLC.