Base fluid definition

Base fluid means the continuous phase fluid used in the makeup of a well stimulation treatment fluid. The continuous phase fluid may include, but is not limited to, water, and may be a liquid or a hydrocarbon or nonhydrocarbon gas. A well stimulation treatment may use more than one base fluid.

Base fluid means the continuous phase fluid type,

Base fluid means the continuous phase fluid type, such as water, used in a hydraulic fracturing treatment.

Examples of Base fluid in a sentence

• Base fluid was prepared by the addition of 15 g of bentonite to 350 cc of fresh water and stirred continuously for 15 minutes using 11,000 rpm mixer.

• Definitions.Unless the context otherwise requires, the words defined in this section shall have the following meaning when found in this law:(1) "Base fluid" shall mean the continuous phase fluid type, such as water, used in a hydraulic fracturing treatment.(1a) "Commission" shall mean the North Carolina Oil and Gas Commission.

• Waste sourcePollutant pa- rameterBAT effluent limita- tion Base fluid re- tained on cuttings.For NAFs that meet the stock limita- tions (C16–C18 in- ternal olefin) in this table, the maximum weight- ed mass ratio averaged over all NAF well sections shall be 6.9 g- NAF base fluid/ 100 g-wet drillcuttings.

• Patton, counsel for Defendants, describes the offer in the letter as $1 million from RLI and $400,000 from TTI, but that breakdown was not included in the letter.

• Base fluid in the radiator (40:60%(e.g/w) after conducting the experimental analysis with the water in the radiator, then some experimental runs was conducted with ethaline glycol and water 40:60% eg/w) in order to check the reliability and accuracy of the experimental setup.

More Definitions of Base fluid

Base fluid means the continuous phase or suspending medium of a drilling fluid formulation.

Base fluid means the continuous phase fluid type, including, but not limited to, water, nitrogen gas, or other gas used in a high volume horizontal hydraulic fracturing operation. (Section 1-5 of the Act). “Base fluid” shall also include both hydrocarbon and non-hydrocarbon fluids in gas and or liquid form used in high volume horizontal hydraulic fracturing operations. Calculation and reporting of volumes for all base fluid shall be for the normal volume that the base fluid would occupy at 20° C and one atmosphere (National Institute of Standards and Technology Standard Temperature and Pressure, or “STP”). If part or all of the base fluid will contain any component that at STP would exist in a gaseous state, then, regardless of whether said component is transported or injected or combined in any other form or at any other temperature or pressure, or whether when mixed with other substances the component forms a foam or gel or other dispersion, the volume of that component shall be calculated and reported as the uncompressed volume at STP for all purposes under these rules.

Base fluid means the continuous phase fluid used in

Base fluid means the continuous phase or suspending medium of a drill- ing fluid formulation.

Base fluid means the continuous phase fluid, such as water, which is used in a particular Hydraulic Fracturing Treatment.

Base fluid means any fluid type used in a particular hydraulic fracturing treatment, including, but not limited to, water (including surface water, groundwater, produced water and recycled water) or nitrogen gas and foam fluids, and hydrocarbon gas.

Base fluid means a lubricating fluid whose flow, ageing, lubricity and anti- wear properties, as well as its properties regarding contaminant suspension, have not been improved by the inclusion of additives;