Cadmium plating definition

Cadmium plating means any deposit or coating of metallic cadmium on a metallic surface.
Sample 1Sample 2Sample 3

Examples of Cadmium plating in a sentence

  • Cadmium plating shall be in accordance with class I, type I, of QQ-P-416.

  • Cadmium plating (conductive) shell finish shall be olive drab to yellow and in accordance with QQ-P-416 over a suitable underplate to withstand the 500-hour salt spray test.

  • Durable Construction• Cadmium plating helps resist corrosion during storage and use.

  • Cadmium plating and devices using cadmium should not be used unless specifically approved by the procuring activity.

  • Carbon steel is permitted only if it is protected by a HARD and DURABLE protective paint or Cadmium plating.

  • Cadmium plating except for applications banned under Directive 91/338/EEC(1) amending Directive 76/769/EEC(2) relating to restrictions on the marketing and use of certain dangerous substances and preparations.

  • Cadmium plating shall be in accordance with Class 1, Type I of QQ-P-416.

  • Cadmium plating is only to be used where it has been demonstrated that there is no acceptable alternative available DEF STAN 03-36 refers.

  • Cadmium plating shall not be used anywhere in the construction of the transformer, including all surfaces and parts inside and outside the tank.

  • There are 4 Part A1 processes within the District, including:  Cement manufacture, Animal processing, Cadmium plating and Adhesive and hi-tech material manufacture.

Related to Cadmium plating

  • Cyanoacrylate adhesive means any adhesive with a cyanoacrylate content of at least 95% by weight.

  • Encapsulation means the application of an encapsulant.

  • chemical tanker means a ship constructed or adapted and used for the carriage in bulk of any liquid product listed in chapter 17 of the International Bulk Chemical Code;

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Encapsulant means a substance that forms a barrier between lead-based paint and the environment using a liquid-applied coating (with or without reinforcement materials) or an adhesively bonded covering material.

  • Defoliant means any substance or mixture of substances intended for causing the leaves or foliage to drop from a plant, with or without causing abscission.

  • HDPE means high density polyethylene;

  • L.S.D. means lysergic acid diethylamide.

  • Propellant means a liquefied or compressed gas that is used in whole or in part, such as a cosolvent, to expel a liquid or any other material from the same self-pressurized container or from a separate container.

  • Polystyrene foam means blown polystyrene and expanded and

  • Flashpoint means the minimum temperature at which a liquid gives off a vapor in sufficient concentration to ignite when tested as follows:

  • Chemical Storage Facility means a building, portion of a building, or exterior area adjacent to a building used for the storage of any chemical or chemically reactive products.

  • Anaerobic digester means a liquid manure storage area that is constructed with the intent to capture and combust gas emissions resulting from the digestion of waste by microbes in anaerobic conditions. An anaerobic digester is a LMSA and is required to comply with all requirements applicable to LMSAs. Requirements specific to anaerobic digesters will be noted when applicable.

  • Anaerobic digestion ’ means a controlled process involving microbial decomposition of organic matter in the absence of oxygen ;

  • Flexible vinyl adhesive means an aerosol adhesive designed to bond flexible vinyl to substrates. Flexible vinyl means a nonrigid polyvinyl chloride plastic with at least five percent, by weight, of plasticizer content. A plasticizer is a material, such as a high boiling point organic solvent, that is incorporated into a vinyl to increase its flexibility, workability, or distensibility, and may be determined using ASTM Method E260-91 or from product formulation data.

  • Runoff coefficient means the fraction of total rainfall that will appear at the conveyance as runoff.

  • CCD means code compliance documentation as described in ASME A17.7, Section 2.10.

  • Total tetrahydrocannabinol means the same as that term is defined in § 3.2-4112.

  • JetBrains or “We” means JetBrains s.r.o., having its principal place of business at Xx Xxxxxxxxx XX 0000/00, Xxxxxx, 00000, Xxxxx Xxxxxxxx, registered in the Commercial Register maintained by the Xxxxxxxxx Xxxxx xx Xxxxxx, Xxxxxxx X, Xxxx 00000, ID. No.: 265 02 275.

  • Injection means the injection of carbon dioxide streams into the storage site;

  • Underground injection means the subsurface emplacement of fluids through a bored, drilled or driven well; or through a dug well, where the depth of the dug well is greater than the largest surface dimension. (See also “injection well”.)

  • explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;

  • Cannabinoid edible means food or potable liquid into which a cannabinoid concentrate, cannabinoid extract or dried marijuana leaves or flowers have been incorporated.

  • Floodproofing means any combination of structural and nonstructural additions, changes, or adjustments to structures which reduce or eliminate flood damage to real estate or improved real property, water and sanitation facilities, structures, and their contents.

  • Impact surface means an interior or exterior surface that is subject to damage by repeated sudden force such as certain parts of door frames.