We use cookies on our site to analyze traffic, enhance your experience, and provide you with tailored content.

For more information visit our privacy policy.

Commissioning Process definition

Commissioning Process means the ETI’s commissioning process for the Project as defined in the RfP and as set out at Section 2 of the RFP;
Commissioning Process is a process – a systematic process of ensuring that a building performs in accordance with the design intent, contract documents, and the owner’s operational needs. It’s primary purpose in new or renovated facilities is to apply a Quality Assurance process to the pre-design, design, construction, and post occupancy phases of a facility’s procurement or renovation, referencing the Owners Project Requirements as the guiding document.
Commissioning Process means the Phase I Commissioning Process and the Phase II Commissioning Process.

Examples of Commissioning Process in a sentence

  • To accommodate the LEED Certification Commissioning Process without penalizing a project, a project seeking LEED Certification may receive the applicable base PILOT Exemption Scale for up to 2 years after the project is completed and be transitioned for the remaining period to the Community Benefit PILOT Schedule upon receiving LEED Certification.

  • The following tables outline the anticipated schedule for the Project Commissioning Process.

  • Please note that successful completion of all elements of the ETI’s required due diligence is a pre- requisite to any contract award: failure to meet any due diligence requirements may result in the exclusion of the Respondent(s) and/or the Proposal from the Project Commissioning Process.

  • This report is to request approval to go out to public consultation on the preferred options prior to a final decision by Cabinet and proceeding to Stage 5 within the Commissioning Process by providing evidence the Service Review has completed all relevant tasks.

  • Subject matter to be discussed shall include the Owner’s Project Requirements, Basis of Design and unique contract document requirements as well as specific roles of the contractor relative to the Commissioning Process activities.

  • The Commissioning Authority Professional shall attend this Conference to alert bidders to Commissioning Process requirements with which they may not be familiar.

  • Organize the Commissioning Process components and participate in pre-bid and pre-construction meetings to review the commissioning requirements with the complete commissioning team.

  • Failure to meet due diligence requirements at any stage may result in exclusion of a Proposal from the ETI’s Project Commissioning Process.

  • XXXXXX defines the Commissioning Process as a quality-focused process for enhancing the delivery of a project.

  • Re-Commissioning An application of the Commissioning Process requirements to a project that has been delivered using the Commissioning Process.


More Definitions of Commissioning Process

Commissioning Process means the process of specifying, securing and monitoring of services to meet service needs both in the short and long term as outlined in paragraph 4 below;
Commissioning Process means the process outlined in Schedule 11. [*****]. "Company" means Golar LNG NB13 Corporation, incorporated and registered in the Republic of the Xxxxxxxx Islands, further details of which are set out in Schedule 1 and with its registered address at Trust Company Complex, Ajeltake Road, Ajeltake Island, Majuro, MH96960, Xxxxxxxx Islands and its principal place of business is at 2nd Floor, X.X. Xxxxxxx Building, 0 Xxx-Xx-Xxxxx Xxxx, Xxxxxxxx, XX00, Xxxxxxx. "Connected" has the meaning given in the Corporation Tax Act 2010. "Consents" has the meaning given in paragraph 6.2 of Part A of Schedule 5. "Contracts" has the meaning set out in paragraph 8.1 of Part A of Schedule 5. "Cool Pool" means the vessel pooling arrangement of the same name managed by a company in which the Seller has a minority shareholding.
Commissioning Process means the process consisting of such procedures and tests as from time to time constitute usual industry standards and practices for commissioning a non-fossil fuel generating station of any description specified in Schedule 1 or any generating set forming part of such station in order–

Related to Commissioning Process

  • Commissioning means the process for determining the need for and for obtaining the supply of healthcare and related services by the Trust within available resources.

  • Manufacturing Process means any process for—

  • Bidding Process means the procurement procedure under which sealed bids are invited, received, opened, examined and evaluated for the purpose of awarding a contract;

  • Construction Phase Services means the coordination, implementation and execution of the Work required by this Agreement, which are further defined in Article 8.

  • Commissioning Tests means all of the procedures and tests which, in accordance with the Reasonable and Prudent Standard, and in compliance with industry guidelines, practices and standards, are:

  • Decommissioning Plan means the document containing detailed information on the proposed decommissioning and covering the following: the selected decommissioning strategy; the schedule, type and sequence of decommissioning activities; the waste management strategy applied, including clearance; the proposed end state; the storage and disposal of the waste from decommissioning; the timeframe for decommissioning; the cost estimates for the completion of decommissioning; and the objectives, expected results, milestones, target dates, as well as the corresponding key performance indicators, including, as appropriate, earned value based indicators. The plan is prepared by the nuclear facility license holder and is reflected in the multiannual work programmes of the Programme;

  • Contractor System means the information and communications technology system used by the Contractor in performing the Services including the Software, the Contractor Equipment and related cabling (but excluding the Authority System).

  • Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".

  • Interconnection Studies means the Interconnection Feasibility Study, the System Impact Study, and the Facilities Study described in Tariff, Part IV and Tariff, Part VI.

  • RFP Process or “Bidding Process” means the process governing the submission and evaluation of the Bids as set out in the RFP itself;

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • The Project Plan means the document to be developed by the Supplier and approved by the Purchaser, pursuant to GCC Clause 19, based on the requirements of the Contract and the Preliminary Project Plan included in the Supplier’s bid. The “Agreed and Finalized Project Plan” is the version of the Project Plan approved by the Purchaser, in accordance with GCC Clause 19.2. Should the Project Plan conflict with the Contract in any way, the relevant provisions of the Contract, including any amendments, shall prevail.

  • Scope of Work means the description of Services and Deliverables specified in the Contract and as may be amended.

  • Training program means an NCA-approved Iowa college, the Iowa law enforcement academy or an Iowa hospital approved by the department to conduct emergency medical care training.

  • Commissioning Period has the meaning set forth in Attachment T.

  • Interconnection Feasibility Study means either a Generation Interconnection Feasibility Study or Transmission Interconnection Feasibility Study.

  • Interconnection Study means any of the studies defined in the CAISO Tariff or, if applicable, any distribution provider’s tariff that reflect the methodology and costs to interconnect the Project to the Participating Transmission Owner’s electric grid.

  • Technical Specifications A specification in a document defining the characteristics of a product or a service, such as the quality levels, the environmental and climate performance levels, the design for all needs, including accessibility for people with disabilities, and the evaluation of conformity, of product performance, of the use of the product, safety or dimensions, as well as requirements applicable to the product as regards the name by which it is sold, terminology, symbols, testing and test methods, packaging, marking or labelling, instructions for use, the production processes and methods at every stage in the life cycle of the supply or service, as well as the evaluation and conformity procedures;

  • Development Work means any work carried out in relation to the physical construction of a mine;

  • Project Work means the work required to complete the Project.

  • Generation Interconnection Feasibility Study means a study conducted by the Transmission Provider (in coordination with the affected Transmission Owner(s)) in accordance with Tariff, Part IV, section 36.

  • Completion of work means completion of the entire contracted work. Exhaustion of quantity of any particular item mentioned in the bid document shall not imply completion of work or any component thereof.

  • Contractor Project Manager means the employee identified in a Statement of Work as the Contractor project manager.

  • Project Commissioning means the Project will be considered as commissioned if all equipment as per rated project capacity has been installed and energy has flown into grid, in line with the Commissioning procedures defined in the RfS/PPA.

  • Project Water means water made available for delivery to the contractors by project conservation facilities and the transportation facilities included in the System.

  • Statement of Work means the description of activities performed in completing the Project, as specified in the Contract and as may be amended.