Confining pressure definition

Confining pressure means the combined hydrostatic and lithostatic stresses, or the total weight of the interstitial pore water and rock above a specified depth.
Sample 1Sample 2Sample 3

Examples of Confining pressure in a sentence

  • Confining pressure comparison between the FE results and test data from SRTF [43].

  • Confining pressure was not applied, but natural fracture may show the same tendency with different confining pressure by analogy.

  • In addition, the decrease rate is higher for lower values Confining pressure (MPa)measures averageVolume (mm3)of pressure, where the volumes decrease rapidly between 0 and 10 MPa, and then decrease slowly for higher confining pressures.

  • In this figure, it can be seen that for an insert with a smaller radius, the damage under the insert is more important Figure 3: Distribution of the tensile damage variable d(ξt) Figure 4: Distribution of the compressive strain hardening variable ξc - Confining pressure effectFig.5 shows the distribution of the tensile damage variable for different confining pressures.

  • Confining pressure affects both parameters, so each parameter differs under different confining pressures for a reference sampling size.

  • Confining pressure dependency of air permeability of unsaturated soil barrier, Suman Roy and Rajesh, Sathiyamoorthy, No. 301, 2018, 114-123.

  • In the first, a teapot is very clearly found not to conform to the model of bicycles given earlier.

  • The triaxial chamber was placed in the MTS loading device as shown in Figure 3.6. Confining pressure was applied to the specimen by pressurizing the water surrounding the specimen.

  • Confining pressure and injection pressure are measured with pressure transducers.

  • Figure 3.8. Coreflood experimental setup, A: Core holder, B: Confining pressure gauge, C: Pressure transducer, D: Back-pressure regulator, E: Effluent burette, F: By-pass line, G: Transfer vessel, H: Constant-rate pump, I: Pump reservoir, J: Confining pressure pump.The core holder made by Phoenix Instruments is designed for cores with length of 12 in.

Related to Confining pressure

  • Working pressure means the settled pressure of a compressed gas at a reference temperature of 15 °C in a full pressure receptacle;

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • Reid vapor pressure means the vapor pressure of crude oil or other volatile petroleum products at 100 degrees Fahrenheit as determined by the latest edition of ASTM D6377 (RVPE): Standard Test Method for Determination of Vapor Pressure of Crude Oil.

  • Backpressure means a pressure (caused by a pump, elevated tank or piping, boiler, or other means) on the consumer's side of the service connection that is greater than the pressure provided by the public water system and which may cause backflow.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Low water pressure means water pressure below the regulatory reference level which is the minimum pressure when demand on the system is not abnormal.

  • Pressure means the total load or force per unit area acting on a surface.

  • Storage area means any location, facility, or vehicle which is used to store, to transport, or to secure a radiographic exposure device, a storage container, or a sealed source when it is not in use and which is locked or has a physical barrier to prevent accidental exposure, tampering with, or unauthorized removal of the device, container, or source.

  • Density means the permitted number of dwelling units per

  • Supply Pipe means any part of a service pipe which a water undertaker could not be, or have been required to lay under section 46 of the Water Industry Act 1991; and

  • Cultivation site means a location where cannabis is planted, grown, harvested, dried, cured, graded, or trimmed, or a location where any combination of those activities occurs.

  • Production Area means that part of the animal feeding operation that includes the animal confinement area, the manure storage area, the raw materials storage area, and the waste containment areas. The animal confinement area includes, but is not limited to, open lots, housed lots, feedlots, confinement houses, stall barns, free stall barns, milkrooms, milking centers, egg washing or egg processing areas, areas used for the storage and disposal/treatment of mortalities, cowyards, barnyards, medication pens, walkers, animal walkways, and stables. The manure storage area includes, but is not limited to, lagoons, runoff ponds, storage sheds, stockpiles, under-house or pit storages, liquid impoundments, static piles, and composting piles. The raw materials storage area includes, but is not limited to, feed silos, and silage bunkers. The waste containment area includes, but is not limited to, settling basins and areas within berms and diversions which separate uncontaminated stormwater.

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • Pipelines means those pipelines within the Storage Facility that connect the Tanks to one another and to the receiving and delivery flanges of the Storage Facility.

  • CO2 means carbon dioxide.

  • Design pressure means the hydrostatic pressure for which each structure or appliance assumed watertight in the intact and damage stability calculations is designed to withstand.

  • Cannabis plant means any plant of the genus Cannabis;

  • Gasification means the substoichiometric oxidation or steam reformation of a substance to produce a gaseous mixture containing two or more of the following: (i) oxides of carbon; (ii) methane; and (iii) hydrogen;

  • Meters shall have the meaning set forth in Section 4.6(a) hereof.

  • Pipeline means any pipe, pipes, or pipelines used for the intrastate transportation or transmission of any solid, liquid, or gaseous substance, except water.

  • Outdoor cultivation means the cultivation of mature cannabis without the use of artificial lighting or light deprivation in the canopy area at any point in time. Artificial lighting is permissible only to maintain immature plants outside the canopy area.

  • exploration area means that part of the Area allocated to the Contractor for exploration, described in schedule 1 hereto, as the same may be reduced from time to time in accordance with this contract and the Regulations;

  • Biodiesel means a fuel composed of mono-alkyl esters of long chain fatty acids derived from vegetable oils or animal fats, and, in accordance with standards specified by the American society for testing and materials, designated B100, and meeting the requirements of D-6751, as approved by the department of agriculture.

  • PNode has the meaning set forth in the CAISO Tariff.

  • Staging pile means an accumulation of solid, non- flowing remediation waste (as defined in this section) that is not a containment building and that is used only during remedial operations for temporary storage at a facility. Staging piles must be designated by the Director according to the requirements of § 264.554 of this regulation.