Control tyre definition

Control tyre means a normal production tyre that is used to establish the wet grip performance of tyre sizes unable to be fitted to the same vehicle as the standard reference test tyre – see paragraph 2.2.2.16. of Annex 5 to this Regulation.
Control tyre means a normal production tyre that is used to establish the wet grip or snow grip performance of tyre sizes unable to be fitted to the same vehicle as the standard reference test tyre – see paragraph 2.2.2.8. of Annex 5, part (B) and paragraph 3.4.3. of Annex 7 to this Regulation.
Control tyre or "control tyre set" means a normal production tyre or a normal production tyre set that is used to establish the wet adhesion level or snow performance level or ice performance level of tyre sizes unable to be fitted to the same vehicle as the reference tyre or reference tyre set – see paragraph 2.2.2.8. of Annex 5, part (B), paragraph 3.4.3. of Annex 7 and paragraph 2.4.5.1.1. of Annex 8 to this Regulation."

More Definitions of Control tyre

Control tyre means a new production tyre that is used to establish the snow grip performance of tyre sizes unable to be fitted to the same vehicle as the standard reference test tyre – see paragraph 3.4.3. of Annex 9 to this Regulation 2.51. "Snow grip index (SG)" means the ratio between the performance of the candidate tyre and the performance of the standard reference test tyre.
Control tyre means MRF Tyres as referred to in Appendix 4 of these articles and in accordance with articles 17.1, 17.2 and 17.3 of these articles.
Control tyre means a normal production tyre that is used to establish the wet grip or snow grip performance of tyre sizes unable to be fitted to the same vehicle as the standard reference test tyre – see paragraph

Related to Control tyre

  • Change of Control Termination means (i) a Termination Without Cause of the Employee’s employment by the Employer (other than for death or disability) within twelve (12) months after a Change of Control or (ii) the Employee’s resignation for Good Reason within twelve (12) months after a Change of Control.

  • Control Termination Event shall have the meaning given to such term or any one or more analogous terms in the Lead Securitization Servicing Agreement.

  • Change of Control Triggering Event means the occurrence of both a Change of Control and a Rating Event.

  • Innovative control technology means any system of air pollution control that has not been adequately demonstrated in practice, but would have a substantial likelihood of achieving greater continuous emissions reduction than any control system in current practice or of achieving at least comparable reductions at lower cost in terms of energy, economics, or non-air quality environmental impacts.

  • Change in Control Termination means an “Involuntary Termination Without Cause” or “Resignation for Good Reason,” either of which occurs on, or within three (3) months prior to, or within twelve (12) months following, the effective date of a Change in Control, provided that any such termination is a “separation from service” within the meaning of Treasury Regulation Section 1.409A-1(h). Death and disability shall not be deemed Change in Control Terminations.

  • Control Transaction means the acquisition by a person or group of the status of a controlling person.[PL 2001, c. 640, Pt. A, §2 (NEW); PL 2001, c. 640, Pt. B, §7 (AFF).]

  • Change of Control Period means the period commencing on the date hereof and ending on the third anniversary of the date hereof; provided, however, that commencing on the date one year after the date hereof, and on each annual anniversary of such date (such date and each annual anniversary thereof shall be hereinafter referred to as the "Renewal Date"), unless previously terminated, the Change of Control Period shall be automatically extended so as to terminate three years from such Renewal Date, unless at least 60 days prior to the Renewal Date the Company shall give notice to the Executive that the Change of Control Period shall not be so extended.

  • control zone shall have the meaning given in the Operating Agreement.

  • Change of Control Date has the meaning provided in Section 4.15.

  • Change of Control Transaction means the occurrence after the date hereof of any of (a) an acquisition after the date hereof by an individual or legal entity or “group” (as described in Rule 13d-5(b)(1) promulgated under the Exchange Act) of effective control (whether through legal or beneficial ownership of capital stock of the Company, by contract or otherwise) of in excess of 33% of the voting securities of the Company (other than by means of conversion or exercise of the Debentures and the Securities issued together with the Debentures), (b) the Company merges into or consolidates with any other Person, or any Person merges into or consolidates with the Company and, after giving effect to such transaction, the stockholders of the Company immediately prior to such transaction own less than 66% of the aggregate voting power of the Company or the successor entity of such transaction, (c) the Company sells or transfers all or substantially all of its assets to another Person and the stockholders of the Company immediately prior to such transaction own less than 66% of the aggregate voting power of the acquiring entity immediately after the transaction, (d) a replacement at one time or within a three year period of more than one-half of the members of the Board of Directors which is not approved by a majority of those individuals who are members of the Board of Directors on the Original Issue Date (or by those individuals who are serving as members of the Board of Directors on any date whose nomination to the Board of Directors was approved by a majority of the members of the Board of Directors who are members on the date hereof), or (e) the execution by the Company of an agreement to which the Company is a party or by which it is bound, providing for any of the events set forth in clauses (a) through (d) above.

  • Best available control technology (BACT means an emissions limitation (including a visible emission standard) based on the maximum degree of reduction for each pollutant subject to regulation under CAA which would be emitted from any proposed major stationary source or major modification which the Department, on a case-by-case basis, takes into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combustion techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 7 DE Admin. Code 1120 and 1121. If the Department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard, or combination thereof, may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation, and shall provide for compliance by means which achieve equivalent results.

  • Reasonably Available Control Technology (RACT) means the lowest emission limit that a particular source is capable of meeting by the application of control technology that is reasonably available considering technological and economic feasibility. It may require technology that has been applied to similar, but not necessarily identical source categories.

  • Change of Control Put Date shall have the meaning specified in Section 11.1.

  • Best available control technology or “BACT” means an emissions limitation, including a visible emissions standard, based on the maximum degree of reduction for each regulated NSR pollutant which would be emitted from any proposed major stationary source or major modification which the reviewing authority, on a case-by-case basis, taking into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combination techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 567—subrules 23.1(2) through 23.1(5) (standards for new stationary sources, federal standards for hazardous air pollutants, and federal emissions guidelines), or federal regulations as set forth in 40 CFR Parts 60, 61 and 63 but not yet adopted by the state. If the department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard or combination thereof may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation and shall provide for compliance by means which achieve equivalent results.

  • Control Centre means the location at which ISI sets up the control access and monitoring of the database and processing functions of the ISI Service.

  • Control device means equipment (such as an incinerator or carbon adsorber) used to reduce, by destruction or removal, the amount of air contaminants in an air stream prior to discharge to the ambient air.

  • Change in Control Period means the period beginning three (3) months prior to a Change in Control and ending twelve (12) months following a Change in Control.

  • Control Event Defined. “Control Event” means:

  • Change in Control Transaction means the occurrence of any of the following events:

  • control room means a room on any premises which is specifically designed, built and equipped to coordinate and control an emergency situation in or on the premises in question;

  • Change of Control Notice means notice of a Change of Control Offer made pursuant to Section 3.8, which shall be mailed first-class, postage prepaid, to each record Holder as shown on the Note Register within 30 days following the date upon which a Change of Control occurred, with a copy to the Trustee, which notice shall govern the terms of the Change of Control Offer and shall state:

  • Control Change Date means the date on which a Change in Control occurs. If a Change in Control occurs on account of a series of transactions, the “Control Change Date” is the date of the last of such transactions.

  • Change in Control Date means the date on which a Change in Control occurs.

  • Change of Control Value means (i) the per share price offered to stockholders of the Company in any such merger, consolidation, reorganization, sale of assets or dissolution transaction, (ii) the price per share offered to stockholders of the Company in any tender offer or exchange offer whereby a Change of Control takes place, or (iii) if such Change of Control occurs other than pursuant to a tender or exchange offer, the Fair Market Value per share of the shares into which Awards are exercisable, as determined by the Committee, whichever is applicable. In the event that the consideration offered to stockholders of the Company consists of anything other than cash, the Committee shall determine the fair cash equivalent of the portion of the consideration offered which is other than cash.

  • Change of Control Repurchase Event means the occurrence of both a Change of Control and a Below Investment Grade Rating Event.

  • Change of Control of the Company means a change in control of a nature that would be required to be reported in response to Item 5(f) of Schedule 14A of Regulation 14A promulgated under the Securities Exchange Act of 1934 as in effect on the date of this Agreement or, if Item 5(f) is no longer in effect, any regulations issued by the Securities and Exchange Commission pursuant to the Securities and Exchange Act of 1934 which serve similar purposes; provided that, without limitation, such change in control shall be deemed to have occurred if and when (a) any "person" (as such term is used in Sections 13(d) and 14(d)(2) of the Securities Exchange Act of 1934) is or becomes a beneficial owner, directly or indirectly, of securities of the company representing 25% or more of the combined voting power of the company's then outstanding securities or (b) individuals who were members of the Board of Directors of the Company immediately prior to a meeting of the shareholders of the Company involving a contest for the election of directors shall not constitute a majority of the Board of Directors following such election.