CUBIC METERS definition

CUBIC METERS or “STANDARD CUBIC METER” or “SCM” means the quantity of Gas which occupies a volume of one cubic meter at a temperature of 150C under an pressure of
CUBIC METERS or “STANDARD CUBIC METER” or “SCM” means the quantity of Gas which occupies a volume of one cubic meter at a temperature of 150C under a pressure of 1.03322 kg/cm2 (1.01325 Bar) absolute. “DAY” means a period of 24 consecutive hours beginning at 06:00 hours on each day and ending at 06:00 hours on the following day and the date of any day shall be the date at its beginning, and the term "Daily" shall mean from day to day

Examples of CUBIC METERS in a sentence

  • The Victorias City Water District (VCWD) is seeking a suitable qualified candidate or firm to carry out the contract for the “DESIGN AND BUILD CONTRACT FOR THE DESIGN AND CONSTRUCTION OF 200 CUBIC METERS STEEL-BOLTED GLASS-FUSED GROUND RESERVOIR FOR VICTORIAS CITY WATER DISTRICT” utilizing the most appropriate method and technology.

  • THE AMORTIZATION OF DEPOSITS IS CALCULATED BASED ON THE CONSUMED CUBIC METERS.

  • SUPPLY OF 1300 CUBIC METERS OF 63MM TOP UP BALLAST STONES, 500 CUBIC METERS OF G5 MATERIAL AND 2XA2(6mx150m)BIDIM BY ROAD FOR PEM-LEM PROJECT.

  • U.S. Customary Units lbs./hr.Orifice Letter D E F G H J Area in.2 0.129 0.230 0.359 0.589 0.919 1.509Metric Units kg./hr.Orifice Letter D E Area Cm.2 0.835 1.483 F 2.315 G 3.800 H 5.932 J 9.733Set PressurepsigSet Pressurebarg5*122Note: Specify model 19S with stainless steel wetted trim for steam settings beyond 250 psig / 17.2 barg.* Settings below 15 psi (1.1 barg) are non-ASME code.ASME Section VIII - AirSTANDARD CUBIC FEET PER MINUTE (NORMALIZED CUBIC METERS PER HOUR) OF AIR AT 10% OVERPRESSURE.

  • First 600 Cubic Meters CUBIC METERS EXTENDED ITEM WASTE TYPE QUANTITY UNIT PRICE PRICE 1 Non Alpha 390 [CONFIDENTIAL INFORMATION OMITTED AND FILED SEPARATELY WITH THE 2 Alpha 210 SECURITIES AND EXCHANGE COMMISSION.] Note: The 600 cubic meters pricing represents 120 cubic meters per year for the first five years of processing.

  • IT WAS PRESUMED THAT AN INDIVIDUAL MAY BE EXPOSED TO 20 CUBIC METERS PER DAY OF CONTAMINATED AIR CONTINUOUSLY FOR 70 YEARS.

  • TEMPORARY BEST MANAGEMENT PRACTICES THAT DIVERT OR CARRY SURFACE WATER SHALL BE DESIGNED TO HAVE SUFFICIENT CAPACITY TO CONVEY 1.6 CUBIC FEET PER SECOND (CFS) PER ACRE ( 0.1 CUBIC METERS PER SECOND PER HECTARE) OF TRIBUTARY DRAINAGE, OR THE PEAK DISCHARGE FROM A TWO-YEAR/24-HOUR FREQUENCY STORM EVENT.

  • CUBIC FEET CUBIC FEET X .02832 = CUBIC METERS KILOGRAMS X 2.205 = POUNDS EXAMPLES: YOU’RE GIVEN A CARTON THAT IS 60CM X 40CM X 35CM CONVERT CENTIMETERS TO INCHES (x.3937) = 23.6” X 15.7” X 13.8” MULTIPLY OUT AND THEN DIVIDE BY 1,728 TO OBTAIN CUBIC FEET.

  • Adequate social and economic opportunities: Access to community resources is associated with a higher quality of life.

  • TAJIKISTAN PLANS TO IMPORT 200 MILLION CUBIC METERS OF GAS FROM UZBEKISTAN This year Tajikistan plans to import natural gas from Uzbekistan in the amount of 200 million cubic meters.

Related to CUBIC METERS

  • Cubic Metre means the volume of gas which occupies one cubic metre when such gas is at a temperature of 15 degrees Celsius, and at a pressure of 101.325 kilopascals absolute;

  • Diameter means the diameter of the stem of a tree measured outside the bark at a specified point of measurement.

  • Meters shall have the meaning set forth in Section 4.6(a) hereof.

  • Operating pressure means the pressure at which the parts of an irrigation system are designed by the manufacturer to operate.

  • width means, in relation to a lot,

  • height means the vertical distance between grade and the highest point of the building or structure;

  • INTER-CONNECTION POINT/ DELIVERY/ METERING POINT means a single point at 220kV or above, where the power from the Project(s) is injected into the identified ISTS Substation (including the dedicated transmission line connecting the Projects with the substation system) as specified in the RfS document. Metering shall be done at this interconnection point where the power is injected into. For interconnection with grid and metering, the WPDs shall abide by the relevant CERC/ SERC Regulations, Grid Code and Central Electricity Authority (Installation and Operation of Meters) Regulations, 2006 as amended and revised from time to time.

  • Load means energy consumed by Customers together with allocated losses and unaccounted for energy;

  • Net metering system means a facility for the production of electrical energy that:

  • Check Meter means the Buyer revenue-quality meter section(s) or meter(s), which Buyer may require at its discretion, and which will include those devices normally supplied by Buyer or Seller under the applicable utility electric service requirements.

  • True vapor pressure means the equilibrium partial pressure exerted by a petroleum liquid as determined in accordance with methods described in American Petroleum Institute (API) Bulletin 2517, Evaporation Loss from External Floating Roof Tanks, 1980. The API procedure may not be applicable to some high viscosity or high pour crudes. Available estimates of true vapor pressure may be used in special cases such as these.

  • voltage means the root-mean-square value of electrical potential between two conductors.

  • Cubic foot of gas means the amount of gas required to fill a cubic foot of space when the gas is at an absolute pressure of fourteen and seventy-three hundredths (14.73) pounds per square inch at a temperature of sixty (60) degrees Fahrenheit.

  • interval meter means a meter that measures and records electricity use on an hourly or sub-hourly basis;

  • smart metering system means an electronic system that is capable of measuring electricity fed into the grid or electricity consumed from the grid, providing more information than a conventional meter, and that is capable of transmitting and receiving data for information, monitoring and control purposes, using a form of electronic communication;

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]

  • Cubic Foot means the volume of gas which occupies one cubic foot when such gas is at a temperature of 60 degrees Fahrenheit, and at a pressure of 14.73 pounds per square inch absolute.

  • Pressure means relative pressure versus atmospheric pressure, unless otherwise stated.

  • Density means the permitted number of dwelling units per

  • water meter means any apparatus for measuring or showing the volume of water supplied to, or of effluent discharged from any premises;

  • parking meter means an apparatus for use on or in the vicinity of a parking place for indicating, as respects a space provided at that parking place for the leaving of vehicles, whether the initial charge has been paid and whether the period for which payment was made by the initial charge has expired;

  • tons means the gross tonnage calculated in accordance with the tonnage measurement regulations contained in Annex I of the International Convention on Tonnage Measurement of Ships, 1969; the word “tonnage” shall be construed accordingly.

  • Metering System means all meters and metering devices (including current transformers and potential transformers) owned by the Company and used to measure Dependable Capacity and the delivery by the Company and receipt by BPDB of Net Energy Output;

  • Calibration gas means a gas mixture used to calibrate gas analysers.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).