CREFC® Intellectual Property Royalty License Fee Rate With respect to each Mortgage Loan, a rate equal to 0.0005% per annum.
Best available control technology or “BACT” means an emissions limitation, including a visible emissions standard, based on the maximum degree of reduction for each regulated NSR pollutant which would be emitted from any proposed major stationary source or major modification which the reviewing authority, on a case-by-case basis, taking into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combination techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 567—subrules 23.1(2) through 23.1(5) (standards for new stationary sources, federal standards for hazardous air pollutants, and federal emissions guidelines), or federal regulations as set forth in 40 CFR Parts 60, 61 and 63 but not yet adopted by the state. If the department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard or combination thereof may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation and shall provide for compliance by means which achieve equivalent results.
Best available control technology (BACT means an emissions limitation (including a visible emission standard) based on the maximum degree of reduction for each pollutant subject to regulation under CAA which would be emitted from any proposed major stationary source or major modification which the Department, on a case-by-case basis, takes into account energy, environmental, and economic impacts and other costs, determines is achievable for such source or modification through application of production processes or available methods, systems, and techniques, including fuel cleaning or treatment or innovative fuel combustion techniques for control of such pollutant. In no event shall application of best available control technology result in emissions of any pollutant which would exceed the emissions allowed by any applicable standard under 7 DE Admin. Code 1120 and 1121. If the Department determines that technological or economic limitations on the application of measurement methodology to a particular emissions unit would make the imposition of an emissions standard infeasible, a design, equipment, work practice, operational standard, or combination thereof, may be prescribed instead to satisfy the requirement for the application of best available control technology. Such standard shall, to the degree possible, set forth the emissions reduction achievable by implementation of such design, equipment, work practice or operation, and shall provide for compliance by means which achieve equivalent results.
Licensed IP Rights means, collectively, the Licensed Patent Rights and the Licensed Know-How Rights.
Company Licensed IP means all Intellectual Property rights owned or purported to be owned by a third party and licensed to the Company or any Company Subsidiary or to which the Company or any Company Subsidiary otherwise has a right to use.
U.S.-made end product means an article that⎯
Best available technology means those practices which most appropriately remove, treat, or isolate contaminants from groundwater, soil or associated environment, as determined through professional judgment considering actual equipment or techniques currently in use, published technical articles, site hydrogeology and research results, engineering and groundwater professional reference materials, consultation with experts in the field, capital and operating costs, and guidelines or rules of other regulatory agencies.
Massive Multiauthor Collaboration Site (or “MMC Site”) means any World Wide Web server that publishes copyrightable works and also provides prominent facilities for anybody to edit those works. A public wiki that anybody can edit is an example of such a server. A “Massive Multiauthor Collaboration” (or “MMC”) contained in the site means any set of copyrightable works thus published on the MMC site.
Sub-Licensee means all person/ agency with whom Licensee has executed sub license agreement as per terms and conditions of license agreement executed between DMRC and the Licensee, for commercial utilization of the Bare Spaces.
Company IP Rights means all Intellectual Property owned, licensed, or controlled by the Company or its Subsidiaries that is necessary for or used in the operation of the business of the Company and its Subsidiaries as presently conducted.
Licensed Property means the portion of the Software and the Documentation to which Customer has purchased a License as identified on an applicable Order. Licensed Property shall include any updates or upgrades to the Licensed Property that AvePoint may at its discretion deliver to Customer.
CREFC® Intellectual Property Royalty License Fee With respect to each Mortgage Loan (including any REO Mortgage Loan) and for any Distribution Date, the amount accrued during the related Interest Accrual Period at the CREFC® Intellectual Property Royalty License Fee Rate on, in the case of the initial Distribution Date, the Cut-Off Date Balance of such Mortgage Loan and, in the case of any subsequent Distribution Date, the Stated Principal Balance of such Mortgage Loan as of the close of business on the Distribution Date in the related Interest Accrual Period; provided that such amounts shall be computed for the same period and on the same interest accrual basis respecting which any related interest payment due or deemed due on the related Mortgage Loan is computed and shall be prorated for partial periods. For the avoidance of doubt, the CREFC® Intellectual Property Royalty License Fee shall be payable from the Lower-Tier REMIC.
Co-licensed partner means a person who, with at least one other person, has the right to engage in
Licensed Rights means the rights granted to You subject to the terms and conditions of this Public License, which are limited to all Copyright and Similar Rights that apply to Your use of the Licensed Material and that the Licensor has authority to license.
Licensed Site means a place in any authorised street at which street trading may be engaged in by a Licence Holder, and includes any temporary alternative place approved by the Council or a duly authorised Officer of the Council.
Licensed IP means the Licensed Patents and the Licensed Know-How.
Manufactured end product means any end product in product and service codes (PSCs) 1000-9999, except—
Licensed Know-How means any and all unpatented and/or non-patentable technical data, documents, materials, samples and other information and know‐how that is Controlled by LICENSOR or any of its Affiliates as of the Effective Date or thereafter during the Term that relates to, or is otherwise reasonably necessary or reasonably useful for, the use, Development, manufacture, or Commercialization of the Product. Licensed Know-How shall not include Licensed Patents.
Modular building manufacturer means a person or corporation who owns or operates a
Company Licensed Intellectual Property means Intellectual Property Rights owned by any Person (other than a Group Company) that is licensed to any Group Company.
House dust mite product means a product whose label, packaging, or accompanying literature states that the product is suitable for use against house dust mites, but does not indicate that the product is suitable for use against ants, cockroaches, or other household crawling arthropods.
FLEGT-licensed means production and process methods, also referred to as timber production standards, and in the context of social criteria, contract performance conditions (only), as defined by a bilateral Voluntary Partnership Agreement (VPA) between the European Union and a timber- producing country under the FLEGT scheme, where both Parties have agreed to establish a system under which timber that has been produced in accordance with the relevant laws of the producing country, and other criteria stipulated by the VPA, are licensed for export by the producing country government. This may also include any timber that has been independently verified as meeting all the producing country's requirements for a FLEGT licence, where a VPA has been signed but the FLEGT licensing system is not fully operational. Evidence from a country that has not signed up to a VPA which demonstrates that all of the requirements equivalent to FLEGT-licensed timber have been met will also be acceptable. CPET will produce further guidance on FLEGT-licensed or equivalent timber in due course.
Moroccan end product means an article that—
Licensor Technology means the Licensor Patents, the Licensor Know-How, Licensor Materials, and Non-Patent Rights Controlled by Licensor or its Affiliates embodied in Licensor Know-How or Licensor Materials.
Royalty Product means, either (a) an Alnylam Royalty Product, or (b) an Inex Royalty Product.
End product means those articles, materials, and supplies to be acquired under the contract for public use.