Date Installed definition

Date Installed is the date the Equipment was installed at Customer’s location.
Sample 1Sample 2Sample 3

Examples of Date Installed in a sentence

  • Differences between proposed substitution and specified product: Reason for not providing specified item: Similar Installation: Project: Architect: Address: Owner: Date Installed: Proposed substitution affects other parts of work: No Yes, Explain Supporting Data Attached: Drawings Product Data Samples Tests Reports Other The undersigned certifies: • Proposed substitution has been fully investigated and determined to be equal or superior in all respects to the specified product.

  • Any new cables, communication trunks, fiber optics and the like shall be labeled with the following information, at minimum: Tenant Name, Service Provider Name, Date Installed, Point of Origin and Termination Point.

  • Type of barrel: Number of barrels (must be same type*): Capacity per barrel (gallons): Cost per barrel (not including tax, shipping, or extra items): Installer: Date Installed: *One barrel type per application.

  • The instrument used in screening analysis will be calibrated at least daily.

  • Does the proposed substitution affect other work: No Yes; explain: Supporting Data Attached: Drawings Product Data Samples Tests Reports Other Similar Installation Project: Date Installed Project Address: Project Owner: Project Architect: Architect Contact (Name & phone/e-mail): The Undersigned certifies: • Proposed substitution has been fully investigated and determined to be equal or superior in all respects to specified product.

  • In particular, a successful good project produces y = G while bad projects produce y = B; for simplicity, both projects produce 0 when they fail.

  • Vinyl products has been completed.)Vinyl Product Installed: Color: Signature Property Owner: Date Installed: Owner’s Name: Phone Number: Street Installed: City: State: Zip Code: This will certify that Superior Plastic Products, Inc.

  • PREVIOUS INSTALLATIONS: Identification of similar projects on which proposed substitution was used: Project: Architect: Address: Owner: Date Installed: 5.

  • Firebox Information:Brand: Model Name: Serial Number: Date Installed: Dealer Name: Address: Phone: Email: AB.

  • The serial number and modelnumbers for your refrigerator are located on the upper wall, behind the lighting: Model No. Serial No. Date of Purchase Date Installed Dealer’s Name Address If service requires installation of parts, use only authorized parts to insure protection under the warranty.

Related to Date Installed

  • drainage installation means a system situated on any premises and vested in the owner thereof and is used for or intended to be used for or in connection with the reception, storage, treatment or conveyance of sewage on that premises to the connecting point and includes drains, fittings, appliances, septic tanks, conservancy tanks, pit latrines and private pumping installations forming part of or ancillary to such systems;

  • Existing installation means an installation, construction of which began prior to the effective date of any regulation having application to it.

  • Nuclear installation means any installation of such class or description as may be prescribed by regulations made by the relevant Secretary of State from time to time by statutory instrument, being an installation designed or adapted for:

  • Type 3 Installation means any Technical Installation upon which none of the SW, or only a portion of the SW, deployed is licensed for Use with such TPD, and therefore a TPD is not deployed or running.

  • Type 1 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, and is running on, such TPD;

  • Removable Installations means any items listed on Exhibit F attached hereto and any items agreed by Landlord in writing to be included on Exhibit F in the future, (y) “Tenant’s Property” means Removable Installations and, other than Installations, any personal property or equipment of Tenant that may be removed without material damage to the Premises, and (z) “Installations” means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • Installation Date means the date specified in the Statement of Work by which the Contractor must have the ordered Equipment ready (certified) for use by the State.

  • Type 2 Installation means any Technical Installation upon which all SW deployed is licensed for Use with, but is not running on, such TPD; and,

  • New installation means an installation, construction of which began after the effective date of any regulation having application to it.

  • meter installation means the meter and, if so equipped, the instrument transformers, wiring, test links, fuses, lamps, loss of potential alarms, meters, data recorders, telecommunication equipment and spin-off data facilities installed to measure power past a meter point, provide remote access to the metered data and monitor the condition of the installed equipment;

  • water installation means the pipes and water fittings which are situated on any premises and ownership thereof vests in the owner thereof and used or intended to be used in connection with the use of water on such premises, and includes a pipe and water fitting situated outside the boundary of the premises, which either connects to the connection pipe relating to such premises or is otherwise laid with the permission of the municipality;

  • Utility Installation means carpeting, window and wall coverings, power panels, electrical distribution systems, lighting fixtures, air conditioning, plumbing, and telephone and telecommunication wiring and equipment. At the expiration of the term, Lessor may require the removal of any or all of said alterations, improvements, additions or Utility Installations, and the restoration of the Premises and the Office Building Project to their prior condition, at Lessee's expense. Should Lessor permit Lessee to make its own alterations, improvements, additions or Utility Installations, Lessee shall use only such contractor as has been expressly approved by Lessor, and Lessor may require Lessee to provide Lessor, at Lessee's sole cost and expense, a lien and completion bond in an amount equal to one and one-half times the estimated cost of such improvements, to insure Lessor against any liability for mechanic's and materialmen's liens and to insure completion of the work. Should Lessee make any alterations, improvements, additions or Utility Installations without the prior approval of Lessor, or use a contractor not expressly approved by Lessor, Lessor may, at any time during the term of this Lease, require that Lessee remove any part or all of the same.

  • Utility Installations is used in this Lease to refer to all air lines, power panels, electrical distribution, security, fire protection systems, communications systems, lighting fixtures, heating, ventilating and air conditioning equipment, plumbing, and fencing in, on or about the Premises. The term "TRADE FIXTURES" shall mean Lessee's machinery and equipment which can be removed without doing material damage to the Premises. The term "ALTERATIONS" shall mean any modification of the improvements on the Premises which are provided by Lessor under the terms of this Lease, other than Utility Installations or Trade Fixtures. "LESSEE-OWNED ALTERATIONS AND/OR UTILITY INSTALLATIONS" are defined as Alterations and/or Utility Installations made by Lessee that are not yet owned by Lessor pursuant to Paragraph 7.4(a). Lessee shall not make nor cause to be made any Alterations or Utility Installations in, on, under or about the Premises without Lessor's prior written consent. Lessee may, however, make non-structural Utility Installations to the interior of the Premises (excluding the roof) without Lessor's consent but upon notice to Lessor, so long as they are not visible from the outside of the Premises, do not involve puncturing, relocating or removing the roof or any existing walls, or changing or interfering with the fire sprinkler or fire detection systems and the cumulative cost thereof during the term of this Lease as extended does not exceed $2,500.00.

  • Standard Installation means the installation of drop cable to a customer’s premise where the distance from the point of entry into the building being served is less than 150 feet from the active cable television system plant.

  • Military installation means: a base, camp, post, station, yard, center, homeport facility for any ship, or other activity under the jurisdiction of the Department of Defense, including any leased facility, which is located within any of the several States, the District of Columbia, the Commonwealth of Puerto Rico, the U.S. Virgin Islands, Guam, American Samoa, the Northern Marianas Islands and any other U.S. Territory. Such term does not include any facility used primarily for civil works, rivers and harbors projects, or flood control projects.

  • electrical installation means an electrical installation as defined in the Regulations;

  • offshore installation means any installation which is intended for underwater exploitation of mineral resources or exploration with a view to such exploitation;

  • Automotive instant detailer means a product designed for use in a pump spray that is applied to the painted surface of automobiles and wiped off prior to the product being allowed to dry.

  • Permanent radiographic installation means an enclosed shielded room, cell, or vault, not located at a temporary jobsite, in which radiography is performed.

  • Building, structure, facility, or installation means all of the pollutant-emitting activities which belong to the same industrial grouping, are located on one or more contiguous or adjacent properties, and are under the control of the same person (or persons under common control) except the activities of any vessel. Pollutant-emitting activities shall be considered as part of the same industrial grouping if they belong to the same major group (i.e., which have the same two-digit code) as described in the Standard Industrial Classification Manual, 1972, as amended by the 1977 Supplement (U.S. Government Printing Office stock numbers 4101-0066 and 003-005-00176-0, respectively).

  • Lending Installation means, with respect to a Lender or the Administrative Agent, the office or branch of such Lender or the Administrative Agent listed on the signature pages hereof, on a Schedule, in an Assumption Agreement or otherwise selected by such Lender or the Administrative Agent pursuant to Section 2.17.

  • Installation Charges means those Charges set out in the Order in relation to installation of the Service and/or any Purchased Equipment, Customer Equipment and/or BT Equipment as applicable.

  • Customer’s Installation means an Electrical Installation and includes Distributed Generation, if Distributed Generation is connected to a Customer's Installation; "Customer’s Premises" means the land and buildings owned or occupied by a Customer, and any land over which the Customer has an easement or right to pass electricity, including:

  • Permitted Installation means the activities and the limits to those activities described in Table 1.1.1 of this Permit.

  • Installation Site means the site at which the Product is originally installed.

  • Loose-fitting facepiece means a respiratory inlet covering that is designed to form a partial seal with the face.