DCC Total System definition

DCC Total System means the Systems used by the DCC and/or the DCC
Sample 1Sample 2Sample 3
DCC Total System means the Systems used by the DCC and/or the DCC Service Providers in relation to the Services and/or this Code, including the DCC User Interface, XX XXX and Communications Hubs except for those Communications Hubs which are: (a) neither installed nor in the possession of the DCC; or (b) installed, but are not Commissioned. DCC User Interface means the communications interface designed to allow the communications referred to in Section H3.3 (Communications to be sent via the DCC User Interface) to be sent between the DCC and Users. DCC User Interface Code of Connection means the SEC Subsidiary Document of that name set out in Appendix [TBC]. DCC User Interface Services means the Services described in the DCC User Interface Services Schedule. DCC User Interface means the SEC Subsidiary Document of that name set Services Schedule out in Appendix [TBC].
Sample 1

Examples of DCC Total System in a sentence

  • The DCC shall carry out SMETS1 Device Security Testing in accordance with the requirements of this Clause 17 for the purpose of identifying security risks to the DCC Total System.

  • Security testing is integral to all Test Phases and shall be undertaken to demonstrate that the Modified DCC Total System remains Secure.

  • DCC are only applying negative testing on the components of the Modified DCC Total System that are different from IOC, namely SMSO and requesting party, and relying on evidence of from earlier IOC negative testing.

  • The MHHS SEC Release will modify the DCC Total System to accommodate the changes defined in Table 3.

  • DCC Total System means the DCC Systems together with allCommunications Hubs provided by the DCC as part of the Communications Hub Service.

  • DCC Internal Systems means those aspects of the DCC Total System for whichthe specification or design is not set out in this Code.

  • The objective of this FOC SIT testing set out in this document is to prove changes to the DCC Total System required to support the FOC solution built to operate the Smart Metering Systems that are comprised of the Device Model Combinations (DMCs) that have migrated from the British Gas and Npower SMSOs into the DCC Total System.

  • There is a three-week window between PIT exit and SIT entry within our plan.2) System Integration Testing (SIT) verifies the end-to end operation of the DCC Total System through the integration of the DSP with its interfacing systems and subsystems.

  • We assumed a four-week window between SIT exit and UIT start, which would require DCC to prepare the Test Completion Report in advance of the last day of SIT and align to the (Test Assurance Board) TAB and monthly (Test Advisory Group) TAG meeting cycle.3) User Testing (UT) provides the opportunity for DCC Service Users to undertake testing to verify the integration of the DCC Total System with their own systems and processes.

  • Choosing this option had the advantage of there being a deep understanding of the SEC Modification process; as well as understanding and leveraging the overlap with SEC Mod 122.The technical support used in the project both have significant experience within DCC and a deep technical knowledge of the end-to-end DCC Total System.

Related to DCC Total System

  • total system means the transmission system and the distribution system of the Board taken together;

  • Fuel system means the components which store or transport fuel on board the vehicle and comprise the fuel tank system, all fuel and vapour lines, any non-tank mounted fuel pumps and the activated carbon canister.

  • Multiple tomogram system means a computed tomography X-ray system which obtains X-ray transmission data simultaneously during a single scan to produce more than one tomogram.

  • Disposal system means a system for disposing of sewage, industrial waste, or other wastes, or for the use or disposal of sewage sludge. “Disposal system” includes sewer systems, treatment works, point sources, dispersal systems, and any systems designed for the usage or disposal of sewage sludge.

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • Loop Concentrator/Multiplexer or "LCM" is the Network Element that does one or more of the following: aggregates lower bit rate or bandwidth signals to higher bit rate or bandwidth signals (multiplexing); disaggregates higher bit rate or bandwidth signals to lower bit rate or bandwidth signals (demultiplexing); aggregates a specified number of signals or channels to fewer channels (concentrating); performs signal conversion, including encoding of signals (e.g., analog to digital and digital to analog signal conversion); or in some instances performs electrical to optical (E/O) conversion. LCM includes DLC, and D4 channel banks and may be located in Remote Terminals or Central Offices.

  • Cabinet x-ray system means an x-ray system with the x-ray tube installed in an enclosure independent of existing architectural structures except the floor on which it may be placed. The cabinet x-ray system is intended to contain at least that portion of a material being irradiated, provide radiation attenuation, and exclude personnel from its interior during generation of radiation. Included are all x-ray systems designed primarily for the inspection of carry-on baggage at airline, railroad, and bus terminals, and in similar facilities. An x-ray tube used within a shielded part of a building, or x-ray equipment that may temporarily or occasionally incorporate portable shielding, is not considered a cabinet x-ray system.

  • Combined cycle system means a system comprised of one or more combustion turbines, heat recovery steam generators, and steam turbines configured to improve overall efficiency of electricity generation or steam production.

  • Generator Planned Outage means the scheduled removal from service, in whole or in part, of a generating unit for inspection, maintenance or repair with the approval of the Office of the Interconnection in accordance with the PJM Manuals.

  • XXXXX System means the XXXXX filing system of the Commission and the rules and regulations pertaining thereto promulgated by the Commission in Regulation S-T under the Securities Act and the Exchange Act, in each case as the same may be amended or succeeded from time to time (and without regard to format).

  • Beam axis means a line from the source through the centers of the x-ray fields.

  • Combined sewer system means a system for conveying both sanitary sewage and storm water runoff.

  • Baseline concentration means that ambient concentration level that exists in the baseline area at the time of the applicable minor source baseline date. A baseline concentration is deter- mined for each pollutant for which a minor source baseline date is estab- lished and shall include:

  • Inventory control system means a system described in Section 4-41a-103.

  • SDX System means the system used by NERC to exchange system data.

  • Fire alarm system means a system designed to detect and annunciate the presence of fire, or by-products of fire. Fire alarm system includes smoke detectors.

  • Open video system means an open video system authorized pursuant to 47 U.S.C. § 573 and, for

  • Alarm system means equipment and devices assembled for the purpose of:

  • Grid System means STU / MSEDCL power transmission system / distribution system through which Delivered Energy is evacuated and distributed.

  • Vapor balance system means a combination of pipes or hoses which create a closed system between the vapor spaces of an unloading tank and a receiving tank such that vapors displaced from the receiving tank are transferred to the tank being unloaded.

  • System Revenues means all rates, rents, fees, charges,

  • Gross weight means the aggregate weight of a vehicle or combination of vehicles and the load

  • The Contract Price/Project Cost means the price payable to the Vendor under the Contract for the full and proper performance of its contractual obligations.

  • Total Contract Price/Project Cost/TCO means the price payable to Service Provider over the entire period of Contract for the full and proper performance of its contractual obligations.

  • Radiation therapy simulation system means a radiographic or fluoroscopic x-ray system intended for localizing the volume to be exposed during radiation therapy and confirming the position and size of the therapeutic irradiation field.

  • Hospital system means a hospital and one or more