Deceleration distance definition

Deceleration distance means the additional vertical distance a falling employee travels, excluding lifeline elongation and free fall distance, before stopping, from the point at which the deceleration device begins to operate. It is measured as the distance between the location of an employee's body belt or body harness attachment point at the moment of activation (at the onset of fall arrest forces) of the deceleration device during a fall, and the location of that attachment point after the employee comes to a full stop.
Sample 1Sample 2Sample 3
Deceleration distance means the additional vertical distance a falling person travels, excluding lifeline elongation and free fall distance, before stopping, from the point at which the deceleration device begins to operate.
Sample 1
Deceleration distance means the additional vertical distance a falling employee travels, excluding lifeline elongation and free fall distance, before stopping, from the point at which the deceleration device begins to operate. It is measured as the distance between the location of an employee's body belt or body harness
Sample 1

Examples of Deceleration distance in a sentence

  • Consider the following: › Total Fall Clearance Required = Lanyard length + Deceleration distance (shock absorber) + Height to worker’s back D-ring + Safety factor of 1 meter (3.3’).

  • Deceleration distance: the additional vertical distance a falling employee travels, excluding lifeline elongation and free fall distance, before stopping, from the point at which the deceleration device begins to operate.

  • Deceleration distance guidance can be found in the 2011 AASHTO GDHS, Exhibit 2-25, page 2-35.

  • Deceleration distance shall include any applicable stretch of lifelines and lanyards, the maximum anchorage system deflection, and deployment distance of personal energy absorbers (PEAs) and clutching of self retracting lanyards (SRLs).

  • NOMINAL CAR SPEEDDECELERATION DISTANCE Deceleration distance settings : see under (only with absolute encoder K04SP) Optical reader or magnetic sensors, deceleration distance is set into the shaft directly ENTER🡻 -EMERGENCY OPERA+ ENTER🡻 -🡻 -Choose CONFIGURATION+ … ENTER🡻 -🡻 -CONFIGURATION FREQ.

  • Deceleration distance: The additional vertical distance a falling person travels, excluding lifeline elongation and free fall distance, before stopping, from the point at which a deceleration device begins to operate.

  • Deceleration distance for a fall arrest system must not exceed 3.5 feet.

  • Deceleration distance is the distance over which a fall-arrest system reacts to bring a falling worker to a complete stop.

  • Deceleration distance means the additional vertical distance a falling employee travels, excluding lifeline elongation and free fall distance, before stopping, from the point at which the deceleration device begins to operate.

Related to Deceleration distance

  • Massive Multiauthor Collaboration Site (or “MMC Site”) means any World Wide Web server that publishes copyrightable works and also provides prominent facilities for anybody to edit those works. A public wiki that anybody can edit is an example of such a server. A “Massive Multiauthor Collaboration” (or “MMC”) contained in the site means any set of copyrightable works thus published on the MMC site.

  • Compounded Daily SOFR means, in relation to a Floating Rate Interest Period, the rate of return of a daily compound interest investment (with SOFR as reference rate for the calculation of interest) during the related Observation Period and will be calculated by the Calculation Agent on the related Interest Determination Date as follows: Where:

  • Distance means the great circle distance between the aerodrome of departure and the aerodrome of arrival plus an additional fixed factor of 95 km; and

  • Final RTO Unforced Capacity Obligation means the capacity obligation for the PJM Region, determined in accordance with RAA, Schedule 8.

  • Domestic content procurement preference ’ means all iron and steel used in the project are produced in the United States; the manufactured products used in the project are produced in the United States; or the construction materials used in the project are produced in the United States.

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Firm Transmission Feasibility Study means a study conducted by the Transmission Provider in accordance with Tariff, Part II, section 19.3 and Tariff, Part III, section 32.3.

  • Electrical Distance means, for a Generation Capacity Resource geographically located outside the metered boundaries of the PJM Region, the measure of distance, based on impedance and in accordance with the PJM Manuals, from the Generation Capacity Resource to the PJM Region.

  • Interconnection Feasibility Study means either a Generation Interconnection Feasibility Study or Transmission Interconnection Feasibility Study.

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]

  • Compounded Daily SONIA means, with respect to an Interest Accrual Period, the rate of return of a daily compound interest investment (with the daily SONIA reference rate as reference rate for the calculation of interest) and will be calculated by the Calculation Agent (or such other party responsible for the calculation of the interest rate, as specified in the applicable Pricing Supplement) on the relevant Interest Determination Date, as follows, and the resulting percentage will be rounded if necessary to the fourth decimal place, with 0.00005 per cent being rounded upwards:

  • Basic generation service or "BGS" means electric generation

  • Personalized license plate means a license plate that has displayed on it a

  • high voltage means the classification of an electric component or circuit, if its working voltage is > 60 V and ≤ 1500 V DC or > 30 V and ≤ 1000 V AC root mean square (rms).

  • at a distance means that the service is provided without the parties being simultaneously present,

  • Supported Web Browser means the current release from time to time of Microsoft Edge, Mozilla Firefox, Google Chrome or Apple Safari, or any other web browser that the Provider agrees in writing shall be supported;

  • Fédération means Fédération des caisses Desjardins du Québec.

  • Ionizing radiation means gamma rays, x-rays, alpha and beta particles, high speed electrons, protons, neutrons, and other nuclear particles;

  • Computed tomography means the production of a tomogram by the acquisition and computer processing of X-ray transmission data.

  • voltage means the root-mean-square value of electrical potential between two conductors.

  • Net Metering Net metering refers to customers who sell electricity they produce, typically through a rooftop solar panel, back to the utility for credit. If you are a net metering customer, you should not enroll with XOOM because your net metering agreement will not transfer to XOOM once you enroll.

  • Low-level radioactive waste or “waste” means radioactive material that consists of or contains class A, B, or C radioactive waste as defined by 10 C.F.R. 61.55, as in effect on January 26, 1983, but does not include waste or material that is any of the following:

  • Generator Planned Outage means the scheduled removal from service, in whole or in part, of a generating unit for inspection, maintenance or repair with the approval of the Office of the Interconnection in accordance with the PJM Manuals.

  • Characterizing flavor means a taste or aroma, other than the taste

  • Minimum Generation Emergency means an Emergency declared by the Office of the Interconnection in which the Office of the Interconnection anticipates requesting one or more generating resources to operate at or below Normal Minimum Generation, in order to manage, alleviate, or end the Emergency.

  • Maximum Generation Emergency means an Emergency declared by the Office of the Interconnection to address either a generation or transmission emergency in which the Office of the Interconnection anticipates requesting one or more Generation Capacity Resources, or Non- Retail Behind The Meter Generation resources to operate at its maximum net or gross electrical power output, subject to the equipment stress limits for such Generation Capacity Resource or Non-Retail Behind The Meter resource in order to manage, alleviate, or end the Emergency.