Harvest batch means a specifically identified quantity of dried flower or trim, leaves, and other cannabis plant matter that is uniform in strain, harvested at the same time, and, if applicable, cultivated using the same pesticides and other agricultural chemicals, and harvested at the same time.
Plasma arc incinerator means any enclosed device using a high intensity electrical discharge or arc as a source of heat followed by an afterburner using controlled flame combustion and which is not listed as an industrial furnace.
Cannabis testing facility means an entity registered by
Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.
Small cell facility means a wireless facility that meets both of the following qualifications: (i) each antenna is located inside an enclosure of no more than six cubic feet in volume, or, in the case of an antenna that has exposed elements, the antenna and all of its exposed elements could fit within an imaginary enclosure of no more than six cubic feet and (ii) all other wireless equipment associated with the facility has a cumulative volume of no more than 28 cubic feet, or such higher limit as is established by the Federal Communications Commission. The following types of associated equipment are not included in the calculation of equipment volume: electric meter, concealment, telecommunications demarcation boxes, back-up power systems, grounding equipment, power transfer switches, cut-off switches, and vertical cable runs for the connection of power and other services.
Wind Turbine means a mechanical/electrical system that converts the kinetic energy of blowing wind into mechanical or electric power.
Coagulation means a process using coagulant chemicals and mixing by which colloidal and suspended materials are destabilized and agglomerated into flocs.
Remanufacturing means the activity of overhauling, retrofitting, fabricating, or repairing a product or its component parts for ultimate sale at retail.
Inert ingredient means an ingredient which is not an active ingredient.
Remanufactured means factory rebuilt to original specifications. "Virgin material" means—
Batch means a specific quantity of Product that is intended to be of uniform character and quality, within specified limits, and is produced during the same cycle of Manufacture as defined by the applicable Batch Record.
Commissioning test means tests applied to a distributed generation facility by the applicant after construction is completed to verify that the facility does not create adverse system impacts and performs to the submitted specifications. At a minimum, the scope of the commissioning tests performed shall include the commissioning test specified in Institute of Electrical and Electronics Engineers, Inc. (IEEE) Standard 1547 Section 5.4 "Commissioning tests".
Grab sample means an individual sample collected in less than 15 minutes in conjunction with an instantaneous flow measurement.
Cartridge means a pleated or surface-type filter component with fixed dimensions that is designed to remove suspended particles from water flowing through the filter.
Child-resistant packaging means packaging that is designed or constructed to be significantly difficult for children under five years of age to open or obtain a toxic or harmful amount of the substance in the container within a reasonable time and not difficult for normal adults to use properly, but does not mean packaging that all children under five years of age cannot open or obtain a toxic or harmful amount of the substance in the container within a reasonable time.
Alcohol Screening Device (ASD) means a breath or saliva device, other than an Evidential Breath Testing Device (EBT), that is approved by the National Highway Traffic Safety Administration and placed on its Conforming Products List for such devices.
Mist spray adhesive means any aerosol which is not a special purpose spray adhesive and which delivers a particle or mist spray, resulting in the formation of fine, discrete particles that yield a generally uniform and smooth application of adhesive to the substrate.
Marijuana testing facility means an entity licensed to analyze and certify the safety and potency of marijuana.
HEPA filter means high-efficiency particulate air filters that are rated to achieve a minimum initial particle-removal efficiency of 99.97 per cent using ASTM F 1471– 93 or equivalent standard;
Nonconforming zoning condition means a physical improvement on a property that does not conform with current zoning standards.
Nonconformance as used in this clause means a condition of any hardware, software, material, or service/workmanship in which one or more characteristics do not conform to requirements.
Drug Substance means an active ingredient that is intended to furnish pharmacological activity or other direct effect in the diagnosis, cure, mitigation, treatment, or prevention of disease or to affect the structure or any function of the human body, but does not include intermediates used in the synthesis of such ingredient.
Injection tool means a device used for controlled subsurface injection of radioactive tracer material.
Total tetrahydrocannabinol means the same as that term is defined in § 3.2-4112.
Reactor means a vat or vessel, which may be jacketed to permit temperature control, designed to contain chemical reactions.
Screening Test Technician (STT) means anyone who instructs and assists individuals in the alcohol testing process and operates an ASD.