Electrical component definition

Electrical component or “electronic component” means a component that generates, converts, transmits, or modifies electrical energy. An electrical component or electronic component includes, but is not limited to, a wire, winding, stator, rotor, magnet, contact, relay, printed circuit board, printed wire assembly, wiring board, integrated circuit, resistor, capacitor, and transistors. Electrical component and electronic component do not include a cabinet in which an electrical component or an electronic component is housed.
Sample 1Sample 2Sample 3
Electrical component means the turbine, generator, and associated transmission facilities of a solid waste facility.
Sample 1Sample 2
Electrical component means the turbine, gen- erator, and associated transmission facilities of a solid waste facility.
Sample 1

Examples of Electrical component in a sentence

  • Electrical component and electronic component do not include a cabinet in which an electrical component or an electronic component is housed.

  • During the past few years the Corporation had been imparting training to the SC Youths in Computers Software, Electrical component, Beauty Parlours, cutting & Tailoring, Scooter & Motor Cycles Repairing, Electrical Gadgets, Repair of Refrigerator and Air Conditioning etc.

  • Electrical component damage due to inadequate cleaning of the device.A12.

  • Name plateContains model name and other information Electrical component box Connection chamber Damper (2 pcs.) Air supply fan (2 pcs.) Air filter (4 pcs.)Removes dust and foreign objects.

  • He shall monitor and supervise the vendors for efficient contract management of erection, testing & commissioning of plant and manage all aspects of the Electrical component of Project & will report to General Manager of the Project at site.

  • Where:D = Electrical component of the minimum approach distance in air in meters;C = a correction factor associated with the variation of gap sparkover with voltage;a = A factor relating to the saturation of air at system voltages of 345 kilovolts or higher; 4 VL-G = Maximum system line-to-ground rms voltage in kilovolts-it should be the "actual" maximum, or the normal highest voltage for the range (for example, 10 percent above the nominal voltage); andT = Maximum transient overvoltage factor in per unit.

  • Each component and interface within the Jill prosthesis is linked to one or more of the following tests: • Mechanical actuation test • Fit test • Strength of material test • Grip calibration test • Electrical component test • Electrical output test• Electrical input test • Delay test • Battery test • Thermal balance test • Life of component test • Serviceability test Fig.

  • Electrical component failure one plant has no affect on the other.

  • The agency should have satisfactorily completed, ‘One similar Electrical work costing not less than 80% of the Electrical component in estimate cost.

  • Electrical component costs and hydrogen tank costs are calculated using the same ICCT source and battery costs are estimated using the same Bloomberg light-duty battery prices with a five year delay.

Related to Electrical component

  • Critical Component means, in respect of a weapons system referred to in the definition of Prohibited Defense Contract, a component used specifically in the production of the weapon system or plays a direct role in the lethality of the weapon system.

  • Electrical work Means any labor or material used in installing, altering, maintaining, or extending an electrical wiring system and the appurtenances, apparatus, or equipment used in connection with the use of electrical energy in, on, outside, or attached to a building, residence, structure, property, or premises. The term includes service entrance conductors as defined by the National Electrical Code.

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Electrical Distance means, for a Generation Capacity Resource geographically located outside the metered boundaries of the PJM Region, the measure of distance, based on impedance and in accordance with the PJM Manuals, from the Generation Capacity Resource to the PJM Region.

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Electrical Interconnection Facilities means the equipment and facilities required to safely and reliably interconnect a Facility to the transmission system of the Transmitting Utility, including the collection system between each Bloom System, transformers and all switching, metering, communications, control and safety equipment, including the facilities described in any applicable Interconnection Agreement.

  • Electrical chassis means a set made of conductive parts electrically linked together, whose electrical potential is taken as reference.

  • Electrical contractor means an electrical contractor as defined in the Regulations;

  • Electrical circuit means an assembly of connected live parts which is designed to be electrically energized in normal operation.

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Mechanical Completion means that (a) all components and systems of the Project have been properly constructed, installed and functionally tested according to EPC Contract requirements in a safe and prudent manner that does not void any equipment or system warranties or violate any permits, approvals or Laws; (b) the Project is ready for testing and commissioning, as applicable; (c) Seller has provided written acceptance to the EPC Contractor of mechanical completion as that term is specifically defined in the EPC Contract.

  • Generator Planned Outage means the scheduled removal from service, in whole or in part, of a generating unit for inspection, maintenance or repair with the approval of the Office of the Interconnection in accordance with the PJM Manuals.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Electrical Fitter means an employee who is mainly employed in the workshops manufacturing, fitting, and repairing electrical instruments, machines, and apparatus. Electrical fitting in this definition shall include armature and transformer winding, and people solely engaged in making and repairing instruments. The legitimate possession of a certificate of competency in this particular class of work issued by the Electrical Licensing Board under the Electricity Act 1994 shall be recognised as proof of efficiency.

  • Service Component means certain enabling Software, hardware peripherals and associated documentation which may be separately provided by Symantec as an incidental part of a Service.

  • Digital audio-visual work means a series of related images which, when shown in succession, imparts an impression of motion, together with accompanying sounds, if any.

  • Accrual Components As specified in the Preliminary Statement.

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Electric System Upgrades means any Network Upgrades, Distribution Upgrades, or Interconnection Facilities that are determined to be necessary by the CAISO or Participating Transmission Owner, as applicable, to physically and electrically interconnect the Project to the Participating Transmission Owner’s electric system for receipt of Energy at the Point of Interconnection (as defined in the CAISO Tariff) if connecting to the CAISO Grid, or the Interconnection Point, if connecting to a part of the Participating TO’s electric system that is not part of the CAISO Grid.

  • drainage work means any watercourse and includes any land which is expected to provide flood storage capacity for any watercourse and any bank, wall, embankment or other structure, or any appliance, constructed or used for land drainage or flood defence;

  • Maintenance area means any geographic region of the United States previously designated nonattainment pursuant to the CAA Amendments of 1990 and subsequently redesignated to attainment subject to the requirement to develop a maintenance plan under Section 175A of the CAA, as amended.

  • Potable water means water which meets the requirements of 35 Ill. Adm. Code 604 for drinking, culinary, and domestic purposes.

  • Design flow means the average annual flow or average daily flow specified in an approved facilities plan or approved plans and specifications, the flow specified in a WPDES permit, or the flow required to meet performance standards.

  • Energy efficiency improvement means equipment, devices, or materials intended to decrease energy consumption, including, but not limited to, all of the following: