Electrical grounding definition

Electrical grounding means to connect with the ground to make the earth part of the circuit;
Electrical grounding means to con- nect with the ground to make the earth part of the circuit. § 77.100
Electrical grounding means the connection by an electric conductor of any electric appliance or electric machinery to the water system of GWA.

Examples of Electrical grounding in a sentence

  • Electrical grounding of equipment and the minimization of ignition sources is required when handling powder to avoid possible dust explosion.

  • Note: Electrical grounding systems should be connected and tested by a licensed and qualified electrician or electrical engineer.

  • Electrical grounding and bonding: Based on the 2005 National Electric Code.

  • The bonding wire shall be grounded.• Electrical grounding and bonding systems shall be included in preventive maintenance schedules to ensure the systems are checked on a regular frequency for electrical continuity.

  • Please confirm Electrical prime will provide Electrical grounding wire for light poles as stated in note 4 on drawing S06.

  • All the control systems are being periodically checked for their reliability and accuracy. Ventilation has been provided in process area where chances of buildup of concentration of hazardous chemicals are high to prevent fire/toxic hazard. Electrical grounding of all equipment is ensured. Unit‘s management has identified all hazardous chemicals in use in the plant and prepared safety data sheets for most of them.

  • Electrical grounding can be accomplished through either a return line in the cable harness or a separate grounding line to the HSC chassis; both can accommodate resistors or another form of discharge/surge protection.

  • Electrical grounding of the buttons will be made with Chotherm tape.

  • Electrical grounding is imperative for proper machine operation as well as for SAFETY.

  • The Red Dragon® 3 Speedy pumps may only be operated with an ELCB (earth leakage circuit break r)!!!! Important !!Electrical grounding of the wiring of the Red Dragon®pumps is absolutely mandatory! Bridge circuits or grounding over neutral conductor are not permitted a d might cause inductive fault current up to 50 Volt! er)!!3ndSetting-up operation has to take place in the following order: 1.


More Definitions of Electrical grounding

Electrical grounding means to con- nect with the ground to make the earth part of the circuit. Mine Safety and Health Admin., Labor § 77.100

Related to Electrical grounding

  • Electrical Distance means, for a Generation Capacity Resource geographically located outside the metered boundaries of the PJM Region, the measure of distance, based on impedance and in accordance with the PJM Manuals, from the Generation Capacity Resource to the PJM Region.

  • Electrical work Means any labor or material used in installing, altering, maintaining, or extending an electrical wiring system and the appurtenances, apparatus, or equipment used in connection with the use of electrical energy in, on, outside, or attached to a building, residence, structure, property, or premises. The term includes service entrance conductors as defined by the National Electrical Code.

  • Electrical Fitter means an employee who is mainly employed in the workshops manufacturing, fitting, and repairing electrical instruments, machines, and apparatus. Electrical fitting in this definition shall include armature and transformer winding, and people solely engaged in making and repairing instruments. The legitimate possession of a certificate of competency in this particular class of work issued by the Electrical Licensing Board under the Electricity Act 1994 shall be recognised as proof of efficiency.

  • Electrical circuit means an assembly of connected live parts which is designed to be electrically energized in normal operation.

  • Interconnector means a transmission line which crosses or spans a border between Member States for the purpose of connecting the national transmission system of those Member States or a transmission line between a Member State and a third country up to the territory of the Member States or the territorial sea of that Member State;

  • Connector means a flanged, screwed, welded, or other joined fitting used to connect two pipelines or a pipeline and a piece of process equipment.

  • Tank means an enclosed space which is formed by the permanent structure of a ship and which is designed for the carriage of liquid in bulk.

  • Drainage area means a geographic area within which stormwater, sediments, or dissolved materials drain to a particular receiving waterbody or to a particular point along a receiving waterbody.

  • Drainage system means one or more artificial ditches, tile drains or similar devices which collect surface runoff or groundwater and convey it to a point of discharge.

  • Electrical chassis means a set made of conductive parts electrically linked together, whose electrical potential is taken as reference.

  • Generator means a device that produces electricity.

  • Electrical equipment means underground equipment that contains dielectric fluid that is necessary for the operation of equipment such as transformers and buried electrical cable.

  • Water surface elevation means the height, in relation to the National Geodetic Vertical Datum (NGVD) of 1929, the North American Vertical Datum (NAVD) of 1988, or other datum, where specified, of floods of various magnitudes and frequencies in the floodplains of riverine areas.

  • voltage means the root-mean-square value of electrical potential between two conductors.

  • Electrical protection barrier means the part providing protection against any direct contact to the high voltage live parts.

  • Network Area means the 50 mile radius around the local school campus the Named Insured is attending.

  • Maintenance area means any geographic region of the United States previously designated nonattainment pursuant to the CAA Amendments of 1990 and subsequently redesignated to attainment subject to the requirement to develop a maintenance plan under Section 175A of the CAA, as amended.

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Substation means the apparatus that connects the electrical collection system of the WECS(s) and increases the voltage for connection with the utility's transmission lines.

  • Ventilation means the supply of outside air into a building through window or other openings due to wind outside and convection effects arising from temperature, or vapour pressure differences (or both) between inside and outside of the building;

  • Taximeter means any device for calculating the fare to be charged in respect of any journey in a hackney carriage or private hire vehicle by reference to the distance travelled or time elapsed since the start of the journey, or a combination of both; and

  • Boiler means an enclosed fossil or other fuel-fired combustion device used to produce heat and to transfer heat to recirculating water, steam, or other medium.

  • Riser means a watertight vertical cylinder and lid allowing access to an OWTS component for inspection, cleaning, maintenance, or sampling.

  • Electrical Interconnection Facilities means the equipment and facilities required to safely and reliably interconnect a Facility to the transmission system of the Transmitting Utility, including the collection system between each Bloom System, transformers and all switching, metering, communications, control and safety equipment, including the facilities described in any applicable Interconnection Agreement.

  • Switch means a switching device employed by a Carrier within the Public Switched Network. Switch includes but is not limited to End Office Switches, Tandem Switches, Access Tandem Switches, Remote Switching Modules, and Packet Switches. Switches may be employed as a combination of End Office/Tandem Switches. "Switched Access Service" means the offering of transmission and switching services to Interexchange Carriers for the purpose of the origination or termination of telephone toll service. Switched Access Services include: Feature Group A, Feature Group B, Feature Group D, 8XX access, and 900 access and their successors or similar Switched Access Services. "Switched Access Traffic" is traffic that originates at one of the Party's End User Customers and terminates at an IXC Point of Presence, or originates at an IXC Point of Presence and terminates at one of the Party's End User Customers, whether or not the traffic transits the other Party's network.

  • HVAC means heating, ventilation and air conditioning.