Engine Maintenance Program definition

Engine Maintenance Program means that certain Maintenance Cost Per Hour (“MCPH”) Engine Services Agreement dated as of October 25, 2007 between General Electric Company (“GE”) and [Bristow Group] . . . or such other similar engine maintenance program from GE or another similar program provider (which such other program shall not be on a pro rata basis, and such other program and the provider thereof must be acceptable to Lessor in its reasonable discretion); and upon return, consistent with the requirements of paragraph (f)(ii) of the Return Addendum.” Doc. 1-1 at 27 (emphasis added).
Sample 1Sample 2Sample 3
Engine Maintenance Program means the Engines’ and APU power by the hour engine maintenance program provided by the engines’ manufacturer or by Jet Support Services, Inc.). All maintenance procedures shall be performed by properly trained, licensed, and certified maintenance sources and personnel utilizing replacement parts approved by the FAA and the manufacturer of (as applicable) the Aircraft or any part thereof. Without limiting the foregoing, GCI shall comply with all mandatory service bulletins and airworthiness directives by causing compliance to such bulletins and/or directives to be completed through corrective modification in lieu of operating manual restrictions.
Sample 1Sample 2Sample 3
Engine Maintenance Program or “EMP” means a “power by the hour” engine maintenance program with a Manufacturer approved maintenance facility governing the maintenance of the Engines installed on the Aircraft at the time of Delivery.
Sample 1Sample 2

Examples of Engine Maintenance Program in a sentence

  • In the event the Client desires to up- grade to another AEPC™ PistonPower™ Airframe or Engine Maintenance Program Agreement at any time during the term of this Agreement, the Client shall provide writ- ten notice to AEPC™ requesting the upgrade.

  • If the deferment goes beyond an approved limit, the procedure set forth in Article 12 of this Annex 6 (Deviation From the Engine Maintenance Program) shall apply.

  • It must either: (1) assign its rights under its current “Engine Maintenance Program” 2 with General Electric Company (“GE”) to HNB; (2) “arrange,” at no cost to HNB, for the Engine’s “eligibility” in a comparable Engine Maintenance Program between HNB and GE; or (3) pay HNB an amount equal to the current estimated cost of causing the Engines’ full enrollment in an Engine Management Program.

  • The Program Manager and the Program Coordinator shall work together to analyze EXXX Eligible Engine and module performance to identify Northwest’s maintenance requirements and schedule engine maintenance and removal in a manner consistent with the Customized Engine Maintenance Program and Northwest’s operational requirements.

  • VENDOR and Northwest shall jointly develop a Customized Engine Maintenance Program for the EXXX Eligible Engines, consistent with VENDOR, other Production Approval Holder and Northwest approved technical data, incorporating applicable service bulletins and Aviation Authority Airworthiness Directive requirements.

  • The Customized Engine Maintenance Program shall fully consider Northwest’s operational requirements and shall be no less rigorous than the instructions for continued airworthiness of the Aircraft issued by the Aircraft’s manufacturer and Production Approval Holders of components of the Aircraft and shall comply with all requirements of the Aviation Authority of the Aircraft.

  • The Customized Engine Maintenance Program shall establish maintenance requirements, including those related to the determination of the off-wing maintenance schedule.

  • This Customized Engine Maintenance Program (“CEMP”) describes the off-wing maintenance procedures agreed to by Northwest and Standard Aero under the Engine Hourly Rate Program.

  • Modifications to the Customized Engine Maintenance Program during the Term of the EXXX shall be jointly developed and agreed to between VENDOR and Northwest.

  • Northwest shall incorporate the Customized Engine Maintenance Program into its continuous airworthiness maintenance program.


More Definitions of Engine Maintenance Program

Engine Maintenance Program means an agreement, in form and substance reasonably satisfactory to Sublessor entered into from time to time between Sublessee and such vendor as Sublessee may designate and as may be reasonably satisfactory to Sublessor, which provides for the maintenance and/or overhaul of the Engines consistent with the Engine manufacturer’s service program.
Sample 1Sample 2

Related to Engine Maintenance Program

  • Maintenance Program means LESSEE's maintenance program as approved by the Aviation Authority or such other maintenance program as LESSOR may, in its discretion, accept in writing.

  • Maintenance Programme shall have the meaning set forth in Clause 14.3; “Maintenance Period” shall have the meaning set forth in Clause 14.1; “Maintenance Requirements” shall have the meaning set forth in Clause 14.2;

  • Maintenance Plan means a maintenance plan pursuant to N.J.A.C. 7:8-5.2(b) and 5.8 prepared by the design engineer for the stormwater management measures incorporated into the design of a major development.

  • Furniture maintenance product means a wax, polish, conditioner or any other product designed for the purpose of polishing, protecting or enhancing finished wood surfaces other than floors but does not include dusting aids, wood cleaners, products designed solely for the purpose of cleaning and products designed to leave a permanent finish such as stains, sanding sealers and lacquers.

  • Routine maintenance means actions performed on a regular or controllable basis or in response to uncontrollable events upon a highway, road, street, or bridge. Routine maintenance includes, but is not limited to, 1 or more of the following:

  • Basic Comprehensive User Guide means the Ministry document titled Basic Comprehensive Certificates of Approval (Air) User Guide” dated April 2004 as amended.

  • Software Maintenance means the process of modifying software after delivery to correct faults, improve performance or other attributes, or adapt to a changed environment. (Reference ISO/IEC 14764:2006, as amended or superseded.) Software maintenance does not include any customization or configuration.

  • Maintenance Manual shall have the meaning ascribed to it in Clause 10.7; “Maintenance Programme” shall have the meaning set forth in Clause 14.3; “Maintenance Period” shall have the meaning set forth in Clause 14.1; “Maintenance Requirements” shall have the meaning set forth in Clause14.2;

  • Maintenance Term means the period of time for which Customer has purchased Maintenance Services, as evidenced by the Purchase Order delivered by Customer in connection therewith, together with all renewals effected in accordance with Section 4 of this Agreement.

  • Preventative Maintenance means the routine, customary or regular course of procedure related to the care or upkeep of an existing Department facility or system, which may also include inspection services provided as part of a preventative maintenance program. Preventive maintenance is conducted to keep equipment working and/or extend the life of the equipment.

  • Generator Maintenance Outage means the scheduled removal from service, in whole or in part, of a generating unit in order to perform necessary repairs on specific components of the facility, if removal of the facility meets the guidelines specified in the PJM Manuals.

  • Computer software maintenance contract means a contract that obligates a seller of computer software to provide a customer with:

  • Maintenance Adder means an adder that may be included to account for variable operation and maintenance expenses in a Market Seller’s Fuel Cost Policy. The Maintenance Adder is calculated in accordance with the applicable provisions of PJM Manual 15, and may only include expenses incurred as a result of electric production.

  • Preventive Maintenance means that maintenance, performed on a scheduled basis by the Contractor, which is designed to keep the Equipment in proper operating condition.

  • Maintenance Test means the maintenance test set out in Clause 12.1 (Maintenance Test).

  • Support and Maintenance Services means the support and maintenance services described in Section 1 of these Support Terms.

  • Maintenance area means any geographic region of the United States previously designated nonattainment pursuant to the CAA Amendments of 1990 and subsequently redesignated to attainment subject to the requirement to develop a maintenance plan under Section 175A of the CAA, as amended.

  • Maintenance Period shall have the meaning set forth in Clause 14.1; “Maintenance Requirements” shall have the meaning set forth in Clause 14.2;

  • Corrective Maintenance means the maintenance which is required when an item has failed or worn out, to bring it back to working order, which may also include those services necessary to partially restore, renew or strengthen an existing Department facility or system, following damage caused by use or normal wear and tear.

  • Scheduled Maintenance means any adjustment, repair, removal, disassembly, cleaning, or replacement of components or systems required by the manufacturer which is performed on a periodic basis to prevent part failure or equipment or engine malfunction, or anticipated as necessary to correct an overt indication of malfunction or failure for which periodic maintenance is not appropriate.

  • Planned Maintenance means any Maintenance BT has planned to do in advance.

  • Maintenance and Support Services means the services provided by Contractor under Appendix F.

  • Emergency Maintenance means any period of maintenance for which, due to reasons beyond its reasonable control, Sprint Convergence is unable to provide prior notice of.

  • Maintenance work means the repair of existing facilities when the size, type or extent of such facilities is not thereby changed or increased. While “maintenance” includes painting and decorating and is covered under the law, it does not include work such as routine landscape maintenance or janitorial services.

  • Maintenance Services means SAP’s then-current maintenance and/or support services offered under and described in detail in the applicable SAP PartnerEdge Model.

  • Maintenance Window means the weekly maintenance windows for the Cloud Service identified in xxxxx://xxxxxxx.xxx.xxx/maintenance-windows. SAP may update the Maintenance Window from time to time in accordance with the Agreement.