Engineered fill definition

Engineered fill means fill over twelve inches in depth placed in layers of soil, crushed stone, or masonry waste material, free of expansive soils and organic materials, compacted and tested according to accepted engineering practices to insureensure that it meets the required load bearing capacity and specified compaction standards as determined by laboratory tests of soil samples from the fill material.
Engineered fill means a designed placement of specified imported soil over existing native soils on an existing parcel with inadequate soil depth to meet the minimum two (2) to three (3) feet of soil depth required beneath a dispersal system, and a minimum of two (2) to three (3) feet of separation between the bottom of a dispersal system and a water table.
Engineered fill means soil that meets the criteria in Table 3 in $30014. “Escherichia coli” means a group of bacteria used as an indicator of fecal pollution. “ETI” see “Evapotranspiration and infiltration bed.”

Examples of Engineered fill in a sentence

  • Engineered fill" is soil or aggregate materials derived from on-property or off-property locations which has been placed on the property to meet specific engineering requirements for the construction of buildings, utility lines, roadway sub-grade, or other structures.

  • Engineered fill shall be granular and well graded meeting the following gradation: ENGINEERED FILL GRADATION On that portion of the aggregate passing the No. 40 sieve, the liquid limit shall not exceed 30, nor shall the plasticity index exceed 15 when tested in accordance with AASHTO T89 and T90.

  • Engineered Fill - Engineered fill is placed to meet engineered project requirements or specifications for a specific use, such as roadway bed material, parking lot foundation, or embankment fill.

  • Engineered fill shall be used for all imported material unless otherwise specified.

  • Adjustment Amounts will be determined by the Administrator (on behalf of the Issuer) and the Administrator will promptly notify the Trustee, the Paying Agent and the Registrar of such amounts.

  • Engineered fill and/or native material would be installed using dump loaders and compactors.

  • The expansion index for the material shall not exceed 50. Engineered fill shall be compacted to at least 90 percent of the maximum dry density as determined by the modified Proctor (ASTM D1557).

  • Engineered fill slopes that will become permanently exposed fill slopes at the development, if any, should be flattened to 2H:1V or flatter, and should be covered with topsoil and sodded or otherwise treated to reduce erosion.

  • Engineered fill material(5,545 tons) was delivered it was spread, compacted and tested (Figure 2) in 6 to 8 inch increments.

  • Engineered fill shall be placed in loose lifts no thicker than eight inches (8").


More Definitions of Engineered fill

Engineered fill means soil fill, which is wetted or dried to near its optimum moisture content, placed in lifts of 12 inches or less and each lift compacted to a minimum percent compaction as specified by a geotechnical engineer.

Related to Engineered fill

  • Medical Specialist means any medical practitioner who is vocationally registered by the Medical Council under the Health Practitioners Competence Assurance Act 2003 in one of the approved branches of medicine and who is employed in either that branch of medicine or in a similar capacity with minimal oversight.

  • Polystyrene foam adhesive means an aerosol adhesive designed to bond polystyrene foam to substrates.

  • High global warming potential hydrofluorocarbons means any hydrofluorocarbons in a particular end use for which EPA’s Significant New Alternatives Policy (SNAP) program has identified other acceptable alternatives that have lower global warming potential. The SNAP list of alternatives is found at 40 CFR Part 82 subpart G with supplemental tables of alternatives available at (http://www.epa.gov/snap/).

  • Child-resistant packaging means packaging that is designed or constructed to be significantly difficult for children under five years of age to open or obtain a toxic or harmful amount of the substance in the container within a reasonable time and not difficult for normal adults to use properly, but does not mean packaging that all children under five years of age cannot open or obtain a toxic or harmful amount of the substance in the container within a reasonable time.

  • explosive actuated fastening device means a tool that is activated by an explosive charge and that is used for driving bolts, nails and similar objects for the purpose of providing fixing;

  • Aviation gasoline means fuel designed for use in the operation of aircraft other than jet aircraft,

  • Fluoroscopic imaging assembly means a subsystem in which X-ray photons produce a visual image. It includes the image receptor(s) such as the image intensifier and spot-film device, electrical interlocks, if any, and structural material providing linkage between the image receptor and diagnostic source assembly.

  • Nitrogen oxides means nitric oxide and nitrogen dioxide, expressed as nitrogen dioxide (NO2);

  • Usable cannabis means any cannabis plant material, including seeds, but not (i) resin that has been extracted from any part of the cannabis plant, its seeds, or its resin; (ii) the mature stalks, fiber produced from the stalks, or any other compound, manufacture, salt, or derivative, mixture, or preparation of the mature stalks; or (iii) oil or cake made from the seeds of the plant.

  • Hydrofluorocarbons means compounds that only contain hydrogen, fluorine, and carbon.

  • Polystyrene foam means blown polystyrene and expanded and

  • Cannabis plant means any plant of the genus Cannabis;

  • Semitrailer means every vehicle of the trailer type so designed and used in conjunction with a

  • Clinical nurse specialist means a registered nurse with relevant post-basic qualifications and 12 months’ experience working in the clinical area of his/her specified post-basic qualification, or a minimum of four years’ post-basic registration experience, including three years’ experience in the relevant specialist field and who satisfies the local criteria.

  • Radiopharmaceutical quality assurance means, but is not limited to, the performance of appropriate chemical, biological, and physical tests on potential radiopharmaceuticals and the interpretation of the resulting data to determine their suitability for use in humans and animals, including internal test assessment, authentication of product history, and the keeping of proper records.

  • Perfluoroalkyl and polyfluoroalkyl substances or “PFAS” means a class of fluorinated organic chemicals containing at least one fully fluorinated carbon atom.

  • Bulk gasoline plant means a gasoline storage and distribution facility with an average daily throughput of 20,000 gallons (76,000 liters) of gasoline or less on a 30-day rolling average.

  • Buffer area means an area of natural or established vegetation managed to protect other components of a Resource Protection Area and state waters from significant degradation due to land disturbances.

  • Consumables and medical devices means (consumables) items that require regular replacement (e.g. batteries) to keep a medical device (such as a hearing aid) operational. Many medical devices require consumables.

  • Cannabinoid extract means a substance obtained by separating cannabinoids from marijuana by:

  • Dry cleaning fluid means any non-aqueous liquid product designed and labeled exclusively for use on: fabrics which are labeled "for dry clean only", such as clothing or drapery; or S-coded fabrics. Dry cleaning fluid includes, but is not limited to, those products used by commercial dry cleaners and commercial businesses that clean fabrics such as draperies at the customer's residence or work place. Dry cleaning fluid does not include spot remover or carpet and upholstery cleaner. For the purposes of this definition, S-coded fabric means an upholstery fabric designed to be cleaned only with water-free spot cleaning products as specified by the Joint Industry Fabric Standards Committee.

  • Diluent means liquid light hydrocarbons with an API gravity at sixty (60) degrees Fahrenheit of forty-five (45) degrees or higher which are naturally occurring petroleum or atmospherically stable products of refining and fractionation, gas well condensates or gas plant condensates (natural gas liquids), or any material acceptable for delivery to BP Pipelines (North America) Inc. pipeline at Black Oak Junction in Gary, Indiana.

  • Diatomaceous earth filtration means a process resulting in substantial particulate removal in which (1) a precoat cake of diatomaceous earth filter media is deposited on a support membrane (septum), and (2) while the water is filtered by passing through the cake on the septum, additional filter media known as body feed is continuously added to the feed water to maintain the permeability of the filter cake.

  • Direct scattered radiation means that scattered radiation which has been deviated in direction only by materials irradiated by the useful beam (See "Scattered radiation").

  • Gasohol means a blended fuel composed of gasoline and fuel grade ethanol.

  • Geothermal fluid means water in any form at temperatures greater than 120