Fall height definition

Fall height means the vertical distance between the highest designated play surface on a piece of equipment and the surface beneath it.
Sample 1Sample 2Sample 3
Fall height means the distance between the highest designated play surface on play equipment and the protective surface beneath it. A designated play surface is any elevated surface designed for standing, walking, crawling, sitting, or climbing,
Sample 1
Fall height means the vertical distance between the highest designated
Sample 1

Examples of Fall height in a sentence

  • Figure 5: Distribution of impact areas only on frame (Fall height: 500 mm)In order to give context to the described results, the sample size of model A was increased to 15 devices.

  • FIGURE 22: Guardrail system for roofingwork Fall height greater than 2m - roof pitch at or below 260 Roof pitch greater than 260 GUARDRAIL OUTSIDE ROOF LINE: [Note:if gutter not present, then the 100mm maximum distance is measured from the fascia board or outer endsof the rafters or top chords to trusses] Scaffolding providing guardrail protection 9.

  • Fall height under 12 inches is one issue and more specifically, how it relates to injury severity.

  • Requirements: 35 cm35 cm35 cm 35 cm Fall height: 40 cm Indentor diameter: 78 mm.

  • Important user input parameters⮚ Mass mean droplet diameter⮚ Fall height and terminal velocity⮚ Relative proportions of Na2O and Na2O2 in the reaction products - Default Assumptions in the CONTAIN-LMR/1B:⮚ All the produced peroxide(Na2O2) is aerosolized.⮚ All the produced monoxide(Na2O) enter the pool.

  • Impact Attenuation Test Certification for the poured-in-place system to be installed in compliance with the Critical Fall height as determined by the Playground Equipment to be installed in conjunction with the poured-in-place surfacing system.

  • Among the testedFigure 4: Distribution of impact areas only on frame (Fall height: 1000 mm)The material choices and their combination, as men- tioned before, might imbalance the centre of mass in z- axis.

Related to Fall height

  • clear height ’, in relation to a sign, means the vertical distance between the lowest edge of the sign and the natural level of the surrounding ground, footway or roadway immediately below the sign;

  • Freeboard height means for vapor degreasers the distance from the top of the vapor zone to the top of the degreaser tank. For cold cleaners, freeboard height means the distance from liquid solvent level in the degreaser tank to the top of the tank.

  • height means the vertical distance between grade and the highest point of the building or structure;

  • the trunk road means the A590 Trunk Road;

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • Stable in relation to land, means land form dimensions are or will be stable within tolerable limits now and in the foreseeable future. Stability includes consideration of geotechnical stability, settlement and consolidation allowances, bearing capacity (trafficability), erosion resistance and geochemical stability with respect to seepage, leachate and related contaminant generation.

  • Electric bicycle means a “class 1 electric bicycle”, a “class 2 electric bicycle”, or a “class 3 electric bicycle” as defined in this section. (ORC 4511.01(RRR))

  • Sign Height means the vertical height of a sign from the lowest point of finished grade to the highest part of the sign;

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Transit Passenger means a passenger who arrives at the airport in an aircraft and departs from the airport in the same aircraft, where such an aircraft is operating a through flight transiting the airport, and includes a passenger in transit through the airport who has to depart in a substituted aircraft because the aircraft on which the passenger arrived has been declared unserviceable.

  • BBBEE means broad-based black economic empowerment as defined in section 1 of the Broad-Based Black Economic Empowerment Act;

  • Pretreatment coating means a coating which contains no more than 12% solids by weight, and at least 0.5% acid by weight, is used to provide surface etching, and is applied directly to metal surfaces to provide corrosion resistance, adhesion, and ease of stripping.

  • Rack means a mechanism for delivering motor vehicle fuel or diesel from a refinery or terminal into a truck, trailer, railroad car, or other means of non-bulk transfer.

  • Check Meter means the Buyer revenue-quality meter section(s) or meter(s), which Buyer may require at its discretion, and which will include those devices normally supplied by Buyer or Seller under the applicable utility electric service requirements.

  • Liquid trap means sumps, well cellars, and other traps used in association with oil and gas production, gathering, and extraction operations (including gas production plants), for the purpose of collecting oil, water, and other liquids. These liquid traps may temporarily collect liquids for subsequent disposition or reinjection into a production or pipeline stream, or may collect and separate liquids from a gas stream.

  • Floor coating means an opaque coating that is labeled and designed for application to flooring, including but not limited to, decks, porches, steps, and other horizontal surfaces which may be subject to foot traffic.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Downtown means the area covered by the Downtown Community Plan.(BYLAW 7688, 2014)

  • Altitude means the vertical distance of a level, a point or an object considered as a point, measured from mean sea level (MSL);

  • Floor wax stripper means a product designed to remove natural or synthetic floor polishes or waxes through breakdown of the polish or wax polymers, or by dissolving or emulsifying the polish or wax. “Floor Wax Stripper” does not include aerosol floor wax strippers or products designed to remove floor wax solely through abrasion.

  • Clear coating means a transparent coating designed to provide the final gloss and resistance properties of the coating system;

  • Wood floor wax means wax-based products for use solely on wood floors.

  • Contractor Selection of Leave Trees means crop and leave trees are unmarked and will be selected by the Contractor.

  • Buffer area means an area of natural or established vegetation managed to protect other components of a Resource Protection Area and state waters from significant degradation due to land disturbances.

  • Intermodal Rail Yard means a rail facility in which cargo is transferred from drayage truck to train or vice-versa.

  • Vehicle measuring attitude means the position of the vehicle as defined by the co-ordinates of fiducial marks in the three-dimensional reference system.