Filter Pack definition

Filter Pack means sand or gravel that is uniform, clean, and siliceous. It is placed in the annulus of the well between the borehole wall and the well screen.
Sample 1Sample 2Sample 3
Filter Pack means the granular material placed in the annular space between the well screen and the borehole.
Sample 1Sample 2Sample 3
Filter Pack means clean, well rounded, smooth, uniform, sand or gravel, which is placed in the annulus of the well between the bore hole wall and the liner, perforated pipe, or well screen to prevent formation material from entering the well.
Sample 1Sample 2Sample 3

Examples of Filter Pack in a sentence

  • Well Screen Size _ Filter Pack _ _PROPOSED CONSTRUCTION ANNULAR SEAL WELLI declare under penalty of perjury under the laws of the State of California that the information furnished as part of this application is true and correct.

  • Filter Pack, Bentonite, and Grout The filter pack, bentonite, and grout materials for monitoring wells were presented in Section 4.3.2.2.2 of the Facility-wide SAP.

  • Natural Gravel Filter Pack Material Gravel or coarse-grained sand for packing shall be hard, water worn, and washed clean of silt, fine sand, dirt, and foreign matter.

  • Well Screen Size _ Filter Pack _ _PROPOSED CONSTRUCTIONANNULAR SEAL WELLI declare under penalty of perjury under the laws of the State of California that the information furnished as part of this application is true and correct.

  • LoD was empirically established using NSCLC or breast cancer pools.^ Observed MAF at the level tested with ≥95% detection rate for variants without direct prior LoD establishment data.Panel-wide SNV and indels detected by Guardant360 CDx are summarized in Table 13 as median values.Table 13.

  • Standard Operating Procedure, PM2.5 FRM Filter Pack Assembly, Disassembly, and Cleaning , DRI SOP #2-112r3, Division of Atmospheric Sciences, Desert Research Institute, Reno NV.

  • P ARTICULATE MONITORS AND SAMPLERS CASTNET Filter Pack Flow:Pre-Maintenance Testing - A leak check on the system was performed and results were outside of acceptable limits.

  • Abutting folds are separated by threads, ribbons, tapes, strips of medium, or continuous beads of glass, foam, or Figure 3.6 – Separatorless Style Filter-Type C Filter PackFilter Casing Continuous Sheet of Corrugated Filter Medium Adhesive Bond Between Filter Pack and Integral Caseplastic spaced across the width of the medium.

  • The resistance to fouling can be enhanced with membrane selection where virtually any commercially available An eccentric weight induces a wobble that resonates at about 50 Hz giving vibration to the Filter Pack aboveStudymembrane materials such as polypropylene, Teflon, polyester, and polysulfone can be used.

  • If in the opinion of the Engineer the walls of the hole above the top of the filter pack require support during development operations, place a temporary casing similar to that specified in Article 090124.03, C, 2, Temporary Casing.The diameter of the hole shall be such as will permit the placement of the minimum thicknessof filter pack as specified in Article 090124.03, E, Filter Pack Placement.


More Definitions of Filter Pack

Filter Pack means the sand, gravel, or both placed in direct contact with the well screen.
Sample 1Sample 2Sample 3
Filter Pack means clean, well rounded, smooth, uniform, sand or gravel, which is placed in the annu- lus of the well between the bore hole wall and the liner, per- forated pipe, or well screen to prevent formation material from entering the well.
Sample 1
Filter Pack means clean, well rounded, smooth, uniform, sand or gravel, which is placed in the annulus of the well between the borehole wall and the well screen to prevent formation material from entering the well.
Sample 1
Filter Pack means a clean sand or sand and gravel material of selected grain size and gradation which is installed in the annular space between a well hole excavation and the outside of the well screen for the purpose of preventing formation material from entering the screen.
Sample 1
Filter Pack means granular material that is placed in the annular space surrounding a well screen to prevent formation material from entering the screen.
Sample 1
Filter Pack means the granular material placed in the annular space between the
Sample 1

Related to Filter Pack

  • Modules means the Base Modules and Extended Modules.

  • Filter means material placed in the useful beam to preferentially absorb selected radiations.

  • Brand Name Specification means a specification limited to one or more items by manufacturers’ names or catalogue number.

  • Cartridge means a pleated or surface-type filter component with fixed dimensions that is designed to remove suspended particles from water flowing through the filter.

  • Filter profile means a graphical representation of individual filter performance, based on continuous turbidity measurements or total particle counts versus time for an entire filter run, from startup to backwash inclusively, that includes an assessment of filter performance while another filter is being backwashed.

  • technical specification means a document that prescribes technical requirements to be fulfilled by a product, process or service;

  • Stack means any point in a source designed to emit solids, liquids, or gases into the air, including a pipe or duct but not including flares.

  • Functional Specifications means the descriptions of features and functions of the Application as expressly set forth in Quote.

  • Sample means urine, blood, breath, saliva, or hair.

  • Module means specific portion of the Application Software designated as such in the Documentation made available to the Customer under the Notification Form.

  • Customer-generator means a user of a net metering system.

  • Pack means a package containing either 20 or 25 cigarettes.

  • Sampler means a person who is employed by or is an owner of a licensed laboratory, grower, or processor and is authorized by that employer to collect samples in accordance with the testing laboratory's standard operating procedures and these Rules.

  • Service Specification means and include detailed description, statements to technical data, performance characteristics, and standards (Indian as well as) as applicable and as specified in the Contract as well as those specifications relating to Industry standards and codes applicable to the performance of the work, work performance quality and the specifications affecting the works or any additional specification required to be produced by the DCO to meet the design criteria.

  • Kit means a set of components that are packaged together and intended to be used to perform a specific in vitro diagnostic examination, or a part thereof;

  • Technical Specifications A specification in a document defining the characteristics of a product or a service, such as the quality levels, the environmental and climate performance levels, the design for all needs, including accessibility for people with disabilities, and the evaluation of conformity, of product performance, of the use of the product, safety or dimensions, as well as requirements applicable to the product as regards the name by which it is sold, terminology, symbols, testing and test methods, packaging, marking or labelling, instructions for use, the production processes and methods at every stage in the life cycle of the supply or service, as well as the evaluation and conformity procedures;

  • Service Specifications means the following documents, as applicable to the Services under Your order: (a) the Oracle Cloud Hosting and Delivery Policies, the Program Documentation, the Oracle service descriptions, and the Data Processing Agreement described in this Schedule C; (b) Oracle’s privacy policies; and (c) any other Oracle documents that are referenced in or incorporated into Your order. The following do not apply to any non-Cloud Oracle service offerings acquired in Your order, such as professional services: the Oracle Cloud Hosting and Delivery Policies, Program Documentation, and the Data Processing Agreement. The following do not apply to any Oracle Software: the Oracle Cloud Hosting and Delivery Policies, Oracle service descriptions, and the Data Processing Agreement.

  • NBOME means the National Board of Osteopathic Medical Examiners, an organization that prepares and administers qualifying examinations for osteopathic physicians.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • MSAA Indicator Technical Specifications document means, as the context requires, either or both of the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Indicator Technical Specifications November 5, 2018 Version 1.3” and the document entitled “Multi-Sector Service Accountability Agreement (MSAA) 2019-20 Target and Corridor-Setting Guidelines” as they may be amended or replaced from time to time;

  • Single tomogram system means a CT x-ray system which obtains x-ray transmission data during a scan to produce a single tomogram.

  • APIs means SAP application programming interface and accompanying or related Documentation, source code, tools, executable applications, libraries, subroutines, widgets and other materials made available by SAP or through SAP tools or SAP Software Development Kit (and all derivative works or modifications thereof) to Provider that allow Provider to integrate the Provider Service with the Cloud Service, including any access code, authentication keys or similar mechanisms to enable access of the APIs.

  • Digital Cross Connect System or "DCS" is a function which provides automated Cross Connection of Digital Signal Level 0 (DS0) or higher transmission bit rate digital channels within physical interface facilities. Types of DCS include but are not limited to DCS 1/0s, DCS 3/1s, and DCS 3/3s, where the nomenclature 1/0 denotes interfaces typically at the DS1 rate or greater with Cross Connection typically at the DS0 rate. This same nomenclature, at the appropriate rate substitution, extends to the other types of DCS specifically cited as 3/1 and 3/3. Types of DCS that cross connect Synchronous Transport Signal level 1 (STS-1 s) or other Synchronous Optical Network (SONET) signals (e.g., STS-3) are also DCS, although not denoted by this same type of nomenclature. DCS may provide the functionality of more than one of the aforementioned DCS types (e.g., DCS 3/3/1 which combines functionality of DCS 3/3 and DCS 3/1). For such DCS, the requirements will be, at least, the aggregation of requirements on the "component" DCS. In locations where automated Cross Connection capability does not exist, DCS will be defined as the combination of the functionality provided by a Digital Signal Cross Connect (DSX) or Light Guide Cross Connect (LGX) patch panels and D4 channel banks or other DS0 and above multiplexing equipment used to provide the function of a manual Cross Connection. Interconnection is between a DSX or LGX to a Switch, another Cross Connection, or other service platform device.

  • DNA sample means any material that has come from a human body and consists of or includes human cells;

  • User Guides means Sprinklr materials made available to Customer through the support portal to assist users of the Platform, as such materials may be updated during the Term.

  • Network Interface Device or "NID" is a Network Element (including all of its features, functions and capabilities) that includes any means of Interconnection of End User Customer premises wiring to Qwest's distribution plant, such as a cross connect device used for that purpose. "New Service Provider" means the Party to which an End User Customer switches its local Exchange Service or the Party to which an End User Customer is porting its telephone number(s).