General Design Standards definition

General Design Standards means the procedures, standards and specifications which are specified and set forth in the Municipality’s engineering General Design Standards which are established and revised from time to time by the Municipality’s Director of Planning and Development or their designate, or as revised by the Municipality's Council from time to time, namely that version in place at the time of Commencement of Construction for the Development Area, provided that the Municipality and the Developer may, by written agreement only, vary or change any of the procedures, standards or specifications set forth in the General Design Standards.
Sample 1Sample 2
General Design Standards means the General Design Standards, as amended from time to time, and are approved by the Municipal Engineer for the construction and installation of the Local Improvements.
Sample 1
General Design Standards means the standards that are approved by the Municipal Engineer for the construction and installation of the Local Improvements.
Sample 1

Examples of General Design Standards in a sentence

  • The A-weighting filter de-emphasizes the very low and very high frequency components of the sound, placing greater emphasis on those frequencies within the sensitivity range of the human ear.Source: County of San Bernardino General Design Standards, Section 87.0905.

  • Testing Requirements, reference Section 10020 Testing Laboratory Services and the City of Mesquite General Design Standards for Testing Procedures 1.

  • General Design Standards for Boating and Water Access Facilities 1.

  • Note: Design standards for the Mmixed uUse Village zoning districts in subsection C below are new.C.E. General Design Standards.

  • Submission of this information during a zoning case is helpful to ensure early on that the applicant is applying the City’s General Design Standards (§ 63.110).• Submission of the MLS listing from the most recent sale.

  • All PUDs must meet the following design criteria.10.61 General Design Standards.

  • General Design Standards for Boating, Port, and Water Access Facilities 1.

  • All privately owned streets shall be constructed in accordance with the provisions in this Article, i.e., General Design Standards, grading requirements and geometric design, horizontal and vertical alignment, pavement thickness, etc.

  • Permanent Dead-End Public Ways (a) General Design Standards Where a public way does not extend beyond the boundary of the subdivision and its continuation is not required by the Planning Commission for access to adjoining property, its terminus shall normally not be nearer to such boundary than one hundred-fifty (150) feet.

  • Possess at least one (1) copy of City of Carrollton General Design Standards on the project site and one copy of North Texas Council of Governments (NCTCOG) Specifications for Public Works Construction.

Related to General Design Standards

  • Design Standards means the standards developed as a requirement of the Programmatic Agreement

  • industrial design means features of shape, configuration, pattern or ornament applied to an article by any industrial process or means, being features which in the finished article appeal to and are judged by the eye, but does not include—

  • Technical Standards means the technical standards set out in paragraph 2.4 of the Order Form;

  • Uniform Network Code means the uniform network code as defined in Standard Special Condition A11(6) of National Grid’s transporters licence, as such code may be amended from time to time in accordance with the terms thereof.

  • Design storm means a hypothetical discrete rainstorm characterized by a specific duration, temporal distribution, rainfall intensity, return frequency, and total depth of rainfall.

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • TA2000 System means DST’s TA2000TM computerized data processing system for shareholder accounting.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • Maximum design heat input means the ability of a unit to combust a stated maximum amount of fuel per hour on a steady state basis, as determined by the physical design and physical characteristics of the unit.

  • Design Manual means the MOHLTC design manual or manuals in effect and applicable to the development, upgrade, retrofit, renovation or redevelopment of the Home or Beds subject to this Agreement.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Universal design means the design of products, environments, programmes and services to be usable by all people, to the greatest extent possible, without the need for adaptation or specialized design. “Universal design” shall not exclude assistive devices for particular groups of persons with disabilities where this is needed.

  • Natural channel design concepts means the utilization of engineering analysis and fluvial geomorphic processes to create, rehabilitate, restore, or stabilize an open conveyance system for the purpose of creating or recreating a stream that conveys its bankfull storm event within its banks and allows larger flows to access its bankfull bench and its floodplain.

  • Technical standard means a document that specifies design, predicted performance and operation and maintenance specifications for a material, device or method.

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • Design Services means architect services, engineer services or landscape architect services.

  • Web Site Accessibility Standards/Specifications means standards contained in Title 1 Texas Administrative Code Chapter 206.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • Applicable water quality standards means all water quality standards to which a discharge is subject under the federal Clean Water Act and which has been (a) approved or permitted to remain in effect by the Administrator following submission to the Administrator pursuant to Section 303(a) of the Act, or (b) promulgated by the Director pursuant to Section 303(b) or 303(c) of the Act, and standards promulgated under (APCEC) Regulation No. 2, as amended.

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Terms of Use means any privacy policy, terms of use or other terms and conditions made applicable by BNYM in connection with the Company’s or a Permitted User’s access to and use of a Component System or a BNYM Web Application or other access site or access method.

  • Industrial Designs means all right, title and interest (and all related IP Ancillary Rights) arising under any Requirement of Law in or relating to registered industrial designs and industrial design applications.