Green standards definition

Green standards means the following standards, products, methods and processes for improving the environment, increasing energy efficiency and enhancing safety and property protection:
Sample 1Sample 2Sample 3
Green standards means the Green Bond Principles, as may be amended, issued and governed by ICMA (or any other standard acceptable to the 4AX) in relation to the classification of Green Instruments;
Sample 1Sample 2Sample 3
Green standards means any of the following standards, products, methods, and processes:
Sample 1

Examples of Green standards in a sentence

  • Once a project has been determined to be eligible for additional subsidization from the Funds, additional priority will be given to projects that meet the Green standards set by the Commission.

  • It seems to me that Umschlag is a quite heavy term, pointing to a new moment.

  • If applicable "Green standards", or equivalent standards, are not available, the Company will replace the lost or damaged "Green building" with construction materials and equipment of like kind and quality.

  • Once a project has been determined to be eligible for additional subsidization from the CWRLF, additional priority will be given to projects that meet the Green standards set by ANRC.

  • Lessons learnt should be highlighted; and (g) Bidder may preferably adopt Green standards for buildings such as LEED certifications or equivalent and prefer low carbon emission industry.

  • California’s CAL Green standards (California Code of Regulations, Title 24, Part 11) require incorporation of energy efficient light fixtures and building materials into the design of new construction projects.

  • The City of Auburndale shall promote a sustainable community by requiring the use of Green standards and practices identified by the Florida Building Code.

  • At least 51% of the customers who benefit from the project have either low or moderate income as defined by the U.S. Department of Housing and Urban Developments’ Community Block Grant (CDBG) Program; and have 1.25% of Median Household Income.Once a project has been determined to be eligible for additional subsidization from the DWSRF, additional priority will be given to projects that meet the Regionalization or Green standards set by NRD and additional principal forgiveness may be provided.

  • Green standards for existing social homes are based on reaching EPC level C, higher levels will increase costs.

  • The number of new lots created within any parent tract is determined by Clean and Green standards of minimum acreage being either 2 or 10 acre lots.


More Definitions of Green standards

Green standards means the Green Bond Principles, as may be amended, issued and governed by ICMA (or any other standard acceptable to the CTSE) in relation to the classificationof Green Instruments;
Sample 1
Green standards means the Green Bond Principles, as may be amended, issued
Sample 1Sample 2

Related to Green standards

  • Codes and Standards means all the applicable codes and standards as indicated in the Technical Specification.

  • Reliability Standards means the criteria, standards, rules and requirements relating to reliability established by a Standards Authority.

  • Safety Standards means all laws, union rules and trade or industry custom or codes of any kind whatsoever, in effect from the date of this Agreement through Final Acceptance of the construction work, pertaining to worker safety and accident prevention applicable to the Project and/or the construction work (including, but not limited to, rules, regulations and standards adopted pursuant to the Occupational Safety and Health Act of 1970, as amended from time to time).

  • Standards means the British or international standards, Authority's internal policies and procedures, Government codes of practice and guidance referred to in Framework Schedule 13 (Standards) together with any other specified policies or procedures identified in Framework Schedule 13 (Standards);

  • Design Standards means the standards developed as a requirement of the Programmatic Agreement

  • Quality Standards means the quality standards published by BSI British Standards, the National Standards Body of the United Kingdom, the International Organisation for Standardisation or other reputable or equivalent body, (and their successor bodies) that a skilled and experienced operator in the same type of industry or business sector as the Contractor would reasonably and ordinarily be expected to comply with, and as may be further detailed in the Specification.

  • NERC Reliability Standards means the most recent version of those reliability standards applicable to the Generating Facility, or to the Generator Owner or the Generator Operator with respect to the Generating Facility, that are adopted by the NERC and approved by the applicable regulatory authorities, which are available at xxxx://xxx.xxxx.xxx/files/Reliability_Standards_Complete_Set.pdf, or any successor thereto.

  • Operating Standards shall have the meaning given such term in Section 2.1.

  • Applicable Standards means the requirements and guidelines of NERC, the Applicable Regional Entity, and the Control Area in which the Customer Facility is electrically located; the PJM Manuals; and Applicable Technical Requirements and Standards.

  • National Standards means the document entitled “National Standards for the Volatile Organic Compound Content of Canadian Commercial/Industrial Surface Coating Products Automotive Refinishing, October 1998, PN 1288" and published by the Canadian Council of Ministers of the Environment;

  • Standards of Practice means the care, skill, and

  • Water quality standards means provisions of state or federal law which consist of a designated use or uses for the waters of the Commonwealth and water quality criteria for such waters based upon such uses. Water quality standards are to protect the public health or welfare, enhance the quality of water and serve the purposes of the State Water Control Law (§ 62.1-44.2 et seq. of the Code of Virginia) and the federal Clean Water Act (33 USC § 1251 et seq.).

  • Accessibility Standards means accessibility standards and specifications for Texas agency and institution of higher education websites and EIR set forth in 1 TAC Chapter 206 and/or Chapter 213.

  • Security Standards means the final rule implementing HIPAA’s Security Standards for the Protection of Electronic PHI, as amended.

  • ISO-NE Practices means the ISO-NE practices and procedures for delivery and transmission of energy in effect from time to time and shall include, without limitation, applicable requirements of the NEPOOL Agreement, and any applicable successor practices and procedures.

  • Pretreatment standards means all applicable Federal rules and regulations implementing Section 307 of the Act, as well as any nonconflicting State or local standards. In cases of conflicting standards or regulations, the more stringent thereof shall be applied.

  • Service Level Standards has the meaning ascribed thereto in Section 2.1 hereof.

  • Clean air standards, as used in this clause, means:

  • Technical Standards means the technical standards set out in paragraph 2.5 of the Order Form;

  • Good Industry Practices means the practices that would be adopted by, and the exercise of that degree of care, skill, diligence, prudence and foresight that reasonably would be expected from, a competent contractor in the international oil and gas industry experienced in performing work similar in nature, size, scope and complexity to the Work and under conditions comparable to those applicable to the Work, where such work is subject to, and such contractor is seeking to comply with, the standards and codes specified in the Contract or (to the extent that they are not so specified) such national or international standards and codes as are most applicable in the circumstances, and the applicable Law.

  • Specifications and Standards means the specifications and standards relating to the quality, quantity, capacity and other requirements for the Project Highway, as set forth in Schedule-D, and any modifications thereof, or additions thereto, as included in the design and engineering for the Project Highway submitted by the Contractor to, and expressly approved by, the Authority;

  • auditing standards means auditing standards as defined in National Instrument 52-107 Acceptable Accounting Principles and Auditing Standards;

  • British Council Requirements means the instructions, requirements, policies, codes of conduct, guidelines, forms and other documents notified to the Supplier in writing or set out on the British Council’s website at xxxx://xxx.xxxxxxxxxxxxxx.xxx/new/about-us/jobs/folder_jobs/register-as-a-consultant/policies-for-consultants-and-associates/ or such other web address as may be notified to the Supplier from time to time (as such documents may be amended, updated or supplemented from time to time during the Term);

  • Prudent Industry Practices means, at a particular time, any of the practices, methods and acts which, in the exercise of reasonable judgment, will result in the proper operation and maintenance of the assets owned by a Party or its Affiliates and shall include, without limitation, the practices, methods and acts engaged in or approved by a significant portion of the industry at such time with respect to the assets of the same or similar types as the assets owned by such Party or its Affiliates. Prudent Industry Practices are not intended to be limited to optimum practices, methods or acts, to the exclusion of all others, but rather represent a spectrum of possible practices, methods and acts which could have been expected to accomplish the desired result at a commercially reasonable cost in a reliable, safe and timely fashion, in compliance with the applicable limited partnership agreement and limited liability company agreement and in accordance with all applicable laws. Prudent Industry Practices are intended to entail the same standards as the Parties would, in the prudent management of their own properties, use from time to time.

  • Network Connection Standards means the Distributor’s written technical and safety standards for connection of an Electrical Installation to the Network that are issued by the Distributor and updated from time to time, and include:

  • National Ambient Air Quality Standards or “NAAQS” means national ambient air quality standards that are promulgated pursuant to Section 109 of the Act, 42 U.S.C. § 7409.