Heater switch definition

Heater switch means a clock operated switch device that is designed, marketed, or sold to start or stop the operation of electric pool heaters.
Sample 1Sample 2Sample 3

Examples of Heater switch in a sentence

  • If a metal work tube is used, it must be earthed (grounded).Switch off the Heater switch whenever loading or unloading the furnace.

  • Heater switch will be provided to allow easy reach of driver to operate mirror heaters on either side.

  • There is also a Heater switch which can be used to disconnect power to the elements.Connect the furnace to the electrical supply.

  • To switch the furnace off, use both the Heater switch and the Instrument switch.

  • DO NOT use any conductive tools within the ceramic work tubes or chamber without isolating the elements.The elements are isolated when the Heater switch is OFF.

  • If the overtemperature controller has not yet been set as required, set it and activate it according to the instructions in the controller manual.Switch on the Heater switch, located on the instrument panel.

  • There is also a Heater switch that can be used to disconnect power to the elements.Connect the furnace to the electrical supply.Operate the instrument switch to activate the temperature controller.

  • If the overtemperature controller has not yet been set as required, set it and activate it according to the instructions in the appropriate manual.Switch on the Heater switch, located on the instrument panel.

  • The maximum temperature is shown on the furnace rating label and on the back page of this manual.Switch off the Heater switch whenever loading or unloading the furnace - see the safety warning below.A ceramic work tube may be cracked if workpieces are inserted too quickly or at temperatures below 900°C (when the tube is more brittle).

  • The room temperature will be displayed❖ Set the annealing time of 4 hours in the timer ❖ Wait for a minute and make Heater switch ON and set temperature alarm switch ON.❖ Heating process will start and it will take about 60 minutes to reach the set annealing temperature of 230 degree.❖ An audible alarm will be initiated when 230 degrees is attained.

Related to Heater switch

  • Diameter at Breast Height (DBH) means the diameter of a tree at 4 1/2 feet above the ground measured from the uphill side.

  • Electric bicycle means a “class 1 electric bicycle”, a “class 2 electric bicycle”, or a “class 3 electric bicycle” as defined in this section. (ORC 4511.01(RRR))

  • Rack means a mechanism for delivering motor vehicle fuel or diesel from a refinery or terminal into a truck, trailer, railroad car, or other means of non-bulk transfer.

  • low voltage means the set of nominal voltage levels that are used for the distribution of electricity and whose upper limit is generally accepted to be an a.c. voltage of 1000V ( or a d.c. voltage of 1500 V). [SANS 1019]

  • apron means a defined area intended to accommodate aircraft for purposes of loading or unloading passengers, mail or cargo, fuelling, parking or maintenance;

  • heat pump means a machine, a device or installation that transfers heat from natural surroundings such as air, water or ground to buildings or industrial applications by reversing the natural flow of heat such that it flows from a lower to a higher temperature. For reversible heat pumps, it may also move heat from the building to the natural surroundings;

  • Intermodal Rail Yard means a rail facility in which cargo is transferred from drayage truck to train or vice-versa.

  • Access Tandem Switch is a Switch used to connect End Office Switches to interexchange Carrier Switches. Qwest's Access Tandem Switches are also used to connect and switch traffic between and among Central Office Switches within the same LATA and may be used for the exchange of local traffic.

  • High voltage bus means the electrical circuit, including the coupling system for charging the REESS, that operates on a high voltage.

  • Sensor means any measurement device that is not part of the vehicle itself but installed to determine parameters other than the concentration of gaseous and particle pollutants and the exhaust mass flow.

  • Fire alarm system means a system designed to detect and annunciate the presence of fire, or by-products of fire. Fire alarm system includes smoke detectors.

  • Incinerator means any enclosed device that:

  • Sewage sludge weight means the weight of sewage sludge, in dry U.S. tons, including admixtures such as liming materials or bulking agents. Monitoring frequencies for sewage sludge parameters are based on the reported sludge weight generated in a calendar year (use the most recent calendar year data when the NPDES permit is up for renewal).

  • Ballast water means water with its suspended matter taken on board a ship to control trim, list, draught, stability or stresses of the ship.

  • Semitrailer means every vehicle of the trailer type so designed and used in conjunction with a

  • Runoff coefficient means the fraction of total rainfall that will appear at the conveyance as runoff.

  • Ton means a ton of two thousand two hundred and forty (2,240) lbs. net dry weight;

  • Working voltage means the highest value of an electrical circuit voltage root-mean-square (rms), specified by the manufacturer, which may occur between any conductive parts in open circuit conditions or under normal operating conditions. If the electrical circuit is divided by galvanic isolation, the working voltage is defined for each divided circuit, respectively.

  • water meter means any apparatus for measuring or showing the volume of water supplied to, or of effluent discharged from any premises;

  • medium voltage means the set of nominal voltage levels that lie above low voltage and below high voltage in the range of 1 kV < Un 44 kV. [SANS 1019]

  • kVA means kilovolt-ampere or kilovolt-amperes;

  • X-ray high-voltage generator means a device which transforms electrical energy from the potential supplied by the x-ray control to the tube operating potential. The device may also include means for transforming alternating current to direct current, filament transformers for the x-ray tube(s), high-voltage switches, electrical protective devices, and other appropriate elements.

  • Ambient air means that portion of the atmosphere, external to buildings, to which the general public has access.

  • voltage means the root-mean-square value of electrical potential between two conductors.

  • Valve means a device used to control the flow of water in the irrigation system.

  • Trunk means a communication line between two switching systems.