Input control definition

Input control. Means measures to ensure the ability to later review and determine if and by whom personal data was entered, changed or removed from data processing systems. ☐ Contract design in compliance with the law with respect to contracts with contractors on the processing of personal data with the corresponding provision on control mechanisms ☐ Obtaining self-disclosures from service providers on their measures to implement requirements under data protection law ☐ Written confirmation of verbal instructions ☐ Recording and adequate provision of suitable actions (e.g. log files) ☐ Use of logging and log analysis systems ☐ Defining those authorised to create data storage media and processing data
Sample 1

Examples of Input control in a sentence

  • Input control data are used in the sample selection algorithm and to edit the input file of UI transactions.

  • The heater will have an Input control – controls the temperature of the heater (control on right hand side).

  • These ChIP-seq data sets quantified according to fold enrichment, defined as the ratio of observed read count over that of an Input control.

  • The objective of Input control is to ensure that the procedures and controls guarantee that (i) the data received for processing are genuine, complete, not previously processed, accurate and properly authorised and (ii) data are entered accurately and without duplication.

  • Input control: The Service Provider must maintain full documentation on data management and maintenance (i.e. measures to check whether data has been entered, changed or removed (deleted), and by whom must be in place).6.

  • Input control is achieved through logging, which can take place at various levels (e.g., operating system, network, firewall, database, application).

  • Input control and validation checks were deficient and the system accepted the same permit and challan numbers more than once.

  • I.3. Input control Chemical certification of land Period of implementation: 1999-2012Public financing of field and analytical works on testing soils for content of heavy metals, pesticide and radionuclide residues; radioactive decontamination of agricultural lands and household plots.

  • Data is encrypted during transmission using the following procedures/protocols: SSL/TLS WPA2 Input control It must be ensured that it can be subsequently checked and determined whether and by whom personal data have been entered into data processing systems, changed or removed.

  • Input control is to be organized by the contractor while accepting purchased goods from the suppliers.

Related to Input control

  • Management Control means the possession, directly or indirectly of the power to direct or cause the direction of the management and policies of the Concessionaire, whether through the ownership of voting securities, by contract or otherwise or the power to elect or appoint more than 50% (fifty percent) of the directors, managers, partners or other individuals exercising similar authority with respect to the Concessionaire.

  • Joint Control means a situation where a company has multiple promoters (but none of the shareholders has more than 50% of voting rights and paid up share capital).

  • Quality control means the total of all activities performed by the Design-Builder, Designer, Construction Inspection Professional Engineering Firm and the Materials Testing Firm or Laboratory, subcontractors, producers or manufacturers to ensure that the Work performed by the Design-Builder conforms to the Contract requirements. For design, Quality Control activities shall include, but not be limited to, procedures for design quality, checking, design review including reviews for constructability, and review and approval of Working Plans. For construction, Quality Control activities shall include, but not be limited to, procedures for materials handling and construction quality, inspection, sampling and testing of materials both on site and at the plant(s), field testing of materials, obtaining and verifying Materials Certifications, record keeping, and equipment monitoring and calibration, production process control, and monitoring of environmental compliance. Quality Control also includes documentation of all QC design and construction efforts. The Scope of Work to be performed as part of the Quality Control task may be changed after the RFQ Phase.

  • air traffic control service means a service provided for the purpose of:

  • area control service means air traffic control service for controlled flights in control areas;

  • aerodrome control service means air traffic control service for aerodrome traffic;

  • Data Controller shall have the same meaning as set out in the Data Protection Act 1998;

  • Service Control Point (SCP) is the node in the common channel signaling network that accepts Queries for certain Database services. The SCP is a real time database system that receives Queries from service platforms, performs subscriber or application-specific service logic, and then sends a Response back to the Query-originating platform. Such service platforms can be Service Switching Points (SSPs) or other network nodes capable of properly formatting and launching Queries.

  • Quality Management Plan means the portion of the Project Development Plan providing the information requested in Section 4.3 of Exhibit B to the ITP.

  • Quality Management System means a set of interrelated or interacting elements that organisations use to direct and control how quality policies are implemented and quality objectives are achieved;

  • Safety Management System means a systematic approach to managing safety, including the necessary organisational structures, accountabilities, policies and procedures;

  • Operational Control means Security monitoring, adjustment of generation and transmission resources, coordinating and approval of changes in transmission status for maintenance, determination of changes in transmission status for reliability, coordination with other Balancing Authority Areas and Reliability Coordinators, voltage reductions and load shedding, except that each legal owner of generation and transmission resources continues to physically operate and maintain its own facilities.

  • PJM Control Area means the Control Area recognized by NERC as the PJM Control Area.

  • Service and support administrator means a person, regardless of title, employed by or under contract with a county board to perform the functions of service and support administration and who holds the appropriate certification in accordance with rule 5123:2-5-02 of the Administrative Code.

  • approach control service means air traffic control service for arriving or departing controlled flights;

  • Area Control Error or “ACE” shall mean the instantaneous difference between a Balancing Authority’s net actual and scheduled interchange, taking into account the effects of Frequency Bias and correction for meter error.

  • Construction management contract means a contract in which a party is retained by the owner to

  • Procurement Management means the Director of Lee County’s Procurement Management Department or designee.

  • Access control means a system for allowing only approved individuals to have unescorted access to the security zone and for ensuring that all other individuals are subject to escorted access.

  • Traffic control signal means a device, whether manually, electrically, or mechanically operated, by which traffic is alternately directed to stop and permitted to proceed.

  • energy management system means a set of interrelated or interacting elements of a plan which sets an energy efficiency objective and a strategy to achieve that objective;

  • Project Management Plan means the portion of the Project Development Plan providing the information requested in Section 4.2 of Exhibit B to the ITP.

  • Supply Start Date means the date(s) specified in clause 2.8;

  • Intensive supervision program means a parole program that

  • Nutrient management plan means a plan developed or approved by the Department of Conservation and Recreation that requires proper storage, treatment and management of poultry waste, including dry litter, and limits accumulation of excess nutrients in soils and leaching or discharge of nutrients into state waters.

  • Engineering control means the use of substitution, isolation, ventilation, and equipment modification to reduce exposure to SARS-CoV-2 virus and COVID-19 disease related workplace hazards and job tasks.