Interior finishes definition

Interior finishes means the exposed interior surfaces of buildings including but not limited to fixed or movable walls and partitions, certain wall coverings, columns, ceilings, and certain floor coverings.
Sample 1Sample 2Sample 3
Interior finishes. Elevator cab walls shall be hardwood, marble, granite, or an equivalent pre-approved by the LCO. Elevator cab floors shall be marble, granite, terrazzo, or an equivalent pre-approved by the LCO. 3.17
Sample 1
Interior finishes. Other than those described herein as Landlord’s Work or obligation, shall be provided by Tenant as specified on Tenant finish drawings.
Sample 1

Examples of Interior finishes in a sentence

  • See APPENDIX H, Interior Finishes & Furniture, Furnishings and Equipment.

  • Refer to Flexi Living Presentation - Refer to Interior Finishes Schedule: Saint Germain for details Reference Number Location Item Details / Description Images Contact Details UPGRADE INCLUSIONS; 4 All Internal Swing & Sliding Doors – Throughout Architraves & Skirting Architraves and Skirting; Profile Type: To match standard inclusion Paint finish: X0, Xxxxx Skirting Height: 92mm Architrave Height: 66mm Doors to remain as is.

  • Demonstrate New York State Building Code compliance through a basic evaluation that identifies Use and Occupancy Classification, Height and Area analysis, Construction Classification, Fire Resistance Ratings, Interior Finishes, Fire Protection systems and Exiting Egress and Handicapped Access.

  • The Design Development phase shall include Structural, Mechanical, Electrical/Lighting, Plumbing, Electronic Security, Civil/Landscape, Sustainability, and Interior Finishes as well as the approach for Furniture and Equipment.

  • Web Address xxxxxxxxxx.xxx.xxx/xxxxxxxx Service Level Agreement Specifics/Requirements of Service • Access Control and Door Hardware • Building Mechanical and HVAC/Refrigeration • Carpentry (excluding custom built products) • Electrical/Lighting • Metal Fabrication • Painting • Plumbing • Regulated Materials & Interior Finishes • Third Party Contracts Service Response Times • Work is performed utilizing available Facilities Services labor.

  • City City City City City Fire Life Safety System City City City City City Alarm System City Library Library City City Exterior Signage City City City/Library City City FACILITY (Library) Interior Finishes Painting, wall coverings etc.

  • The scope of work may include, but is not limited to the following, plus the following assumptions: Wings 100B, 100C & 500 • Accessibility Upgrades: Walkways • New Lighting, Electrical, Data & Fire Alarm Upgrades • New Interior Finishes (Extent Tbd) • New Exterior Painting (Extent Tbd) • Repair/Replace Roofing • Mechanical Replacement • Replace Existing Single Paned Windows & Provide New Shades • Upgraded Electronic Hardware This Addendum modifies the Agreement.

  • We provide 24-hour Emergency Restoration services including: Water and Fire Damage Mitigation Storm Damage Drying and Dehumidification Mold Remediation Document Recovery and Restoration Temporary Power Temporary Repairs We provide Reconstruction services including: Structural Repairs Demolition Mechanical, Electrical and Plumbing Interior Finishes Exterior Finishes Roofing Services Emergency restoration and general contracting services.

  • EXHIBIT F PRELIMINARY PLANS AND COST ESTIMATE River's Edge Parking Garage Preliminary Cost Estimate (Exhibit F, continued) Council Bluffs, Iowa Project Cost Estimate Construction Cost Foundations $ 1,143,009 Superstructure 5,660,806 Exterior Enclosure 192,999 Roofing 9,000 Interior Construction 27,500 Interior Finishes 200 Conveying 105,000 Plumbing 327,605 Fire Protection 50,000 Electrical 756,012 Site Preparation 243,840 Site Improvements 20,000 Civil and Mech.

  • City City City City City Fire Life Safety System City City City City City Alarm System City Library Library City City Exterior Signage City City City City/Library City FACILITY (Library) Interior Finishes Painting, wall coverings etc.


More Definitions of Interior finishes

Interior finishes. All interior painting and finishes including finishes on demising walls, ceilings, and floors.
Sample 1

Related to Interior finishes

  • Interior lot means a lot other than a corner lot.

  • Interior means the spaces, parts, components or elements of an individual dwelling unit.

  • Exterior container means a MIL-STD-129 defined container, bundle, or assembly that is sufficient by reason of material, design, and construction to protect unit packs and intermediate containers and their contents during shipment and storage. It can be a unit pack or a container with a combination of unit packs or intermediate containers. An exterior container may or may not be used as a shipping container.

  • Architectural coating means a coating applied to stationary structures and their appurtenances, to mobile homes, to pavements, or to curbs.

  • Buffer area means an area of natural or established vegetation managed to protect other components of a Resource Protection Area and state waters from significant degradation due to land disturbances.

  • Structural components means liners, leachate collection systems, final covers, run-on/run-off systems, and any other component used in the construction and operation of the MSWLF that is necessary for protection of human health and the environment.

  • Irrigation means application of water to land areas to supply the water needs of

  • Tenant Improvements Defined in Exhibit B, if any.

  • Structural component means a component that supports non-variable forces or weights (dead loads) and variable forces or weights (live loads).

  • Cleaning means the act of removing septage or other wastes from a wastewater treatment system component or grease/waste from a grease interceptor.

  • Landscaping means the treatment of land (other than buildings) being the site or part of the site in respect of which this planning permission is granted, for the purpose of enhancing or protecting the amenities of the site and the area in which it is situated and includes screening by fences, walls or other means of enclosure; measures to screen the refuse provision; planting of trees, hedges, shrubs or grass; formation of banks, terraces or other earth works, laying out of gardens, paved areas or courts and other amenity features.

  • Configuration means State-specific changes made to the Software without Source Code or structural data model changes occurring.

  • Finished water means the water that is introduced into the distribution system of a public water system and is intended for distribution and consumption without further treatment, except as treatment necessary to maintain water quality in the distribution system (e.g., booster disinfection, addition of corrosion control chemicals).

  • Building Square Footage or "BSF" means the square footage of assessable internal living space of a Unit, exclusive of any carports, walkways, garages, overhangs, patios, enclosed patios, detached accessory structure, other structures not used as living space, or any other square footage excluded under Government Code Section 65995 as determined by reference to the Building Permit for such Unit.

  • janitorial services means those cleaning and caretaking services

  • Industrial maintenance coating means a high performance architectural coating, including primers, sealers, undercoaters, intermediate coats, and topcoats formulated for application to substrates, including floors, exposed to one or more of the following extreme environmental conditions listed below and labeled “For industrial use only;” “For professional use only;” “Not for residential use;” or “Not intended for residential use.”

  • Base Building shall include the structural portions of the Building, the public restrooms and the Building mechanical, electrical and plumbing systems and equipment located in the internal core of the Building on the floor or floors on which the Premises are located. Tenant shall promptly provide Landlord with copies of any notices it receives regarding an alleged violation of Law. Tenant shall comply with the rules and regulations of the Building attached as Exhibit E and such other reasonable rules and regulations adopted by Landlord from time to time, including rules and regulations for the performance of Alterations (defined in Section 9).

  • Structural as herein used means any portion of the Premises or Complex which provides bearing support to any other integral member of the Complex such as, by limitation, the roof structure (trusses, joists, beams), posts, load bearing walls, foundations, girders, floor joists, footings, and other load bearing members constructed by Landlord.

  • Modular building manufacturer means a person or corporation who owns or operates a

  • Plans and Specifications means the plans, drawings and specifications reasonably necessary to properly assess and review proposed Work prior to issuance of any approval that may be required under this Agreement;

  • Installations means all property of any kind paid for by Landlord, all Alterations, all fixtures, and all partitions, hardware, built-in machinery, built-in casework and cabinets and other similar additions, equipment, property and improvements built into the Premises so as to become an integral part of the Premises, including, without limitation, fume hoods which penetrate the roof or plenum area, built-in cold rooms, built-in warm rooms, walk-in cold rooms, walk-in warm rooms, deionized water systems, glass washing equipment, autoclaves, chillers, built-in plumbing, electrical and mechanical equipment and systems, and any power generator and transfer switch.

  • TENDER SPECIFICATIONS means the Scope of Work, Special Instructions / Conditions, Technical specifications/requirement , Appendices, Site Information and drawings pertaining to the work and any other relevant reference in the Tender Document for which the Bidder are required to submit their offer.

  • Building means any structure used or intended for supporting or sheltering any use or occupancy.

  • Landscape means an area, as perceived by people, whose character is the result of the action and interaction of natural and/or human factors;

  • Standard Specifications means a compilation in book form of specifica- tions approved for general application and repetitive use;

  • Modular building means, but shall not be limited to, single and multifamily houses, apartment