Limiting feature definition

Limiting feature means a feature of the soil that limits or intercepts the vertical movement of water, including seasonal, perched or permanent water table, pans, soil restrictions, and pervious or impervious bedrock.
Sample 1Sample 2Sample 3

Examples of Limiting feature in a sentence

  • The switch should be always turned on its QoS feature, IGMP Snooping feature, and Rate Limiting feature and should allow the users to specify which priority traffic or which traffic type to be rate limited.

  • FEATURE NAME: ROAD SPEED LIMITINGVEH-ROAD-SPD-GOVEnable/Disable for Road Speed Limiting Feature• 0: DISABLE, feature is turned off at all times.• 1: ENABLE, feature is turned on and active at all times.MAX-ENGINE SPEED (NO VSSN) (rpm)Engine speed will be limited to this value when a vehicle speed sensor fault is present and the Road Speed Limiting feature is enabled.

  • Other parameters which must be considered when programming this feature:1) MAXIMUM CRUISE CONTROL SPEED (Cruise Control): In order to encourage use of cruise control for best fuel economy, the MAXIMUM CRUISE CONTROL SPEED should not be programmed to be less than the value programmed for VEHICLE SPEED LIMIT in the Road Speed Limiting feature.

  • Rather than completely turn off power to homes and customers who failed to remain current with their utility bills, utilities are able to leverage this Service Limiting feature to maintain basic services, particularly during cold winter months or hot summer months when disconnecting power to homes could threaten the lives of their customers.

Related to Limiting feature

  • Beam-limiting device means a device which provides a means to restrict the dimensions of the x-ray field.

  • Variable-aperture beam-limiting device means a beam-limiting device which has capacity for stepless adjustment of the x-ray field size at a given SID.

  • Water feature means a design element where open water performs an aesthetic or recreational function. Water features include ponds, lakes, waterfalls, fountains, artificial streams, spas, and swimming pools (where water is artificially supplied). The surface area of water features is included in the high water use hydrozone of the landscape area. Constructed wetlands used for on-site wastewater treatment, habitat protection, or storm water best management practices that are not irrigated and used solely for water treatment or storm water retention are not water features and, therefore, are not subject to the water budget calculation.

  • sentence means any punishment or measure involving deprivation of liberty ordered by a court for a limited or unlimited period of time on account of a criminal offence;

  • Statutory maximum sentence means the maximum length of

  • the limits of deviation means the limits of deviation shown on the deposited plan;

  • Maximum Daily Limit means the maximum allowable "Daily Concentration" (defined above) when expressed as a concentration (e.g. mg/l), otherwise, it means the maximum allowable "Daily Quantity" as defined above, unless it is expressed as a flow quantity. If expressed as a flow quantity it means "Maximum Daily Flow" as defined in Section 22a-430-3(a) of the RCSA.

  • CLASS Features means certain CCIS-based features available to Customers, including: Automatic Call Back; Caller Identification and related blocking features; Distinctive Ringing/Call Waiting; Selective Call Forward; and Selective Call Rejection.

  • Daily Maximum Limit means the maximum allowable discharge of a pollutant during a calendar day. Expressed as units of mass, the daily discharge is cumulative mass discharged over the course of the day. Expressed as a concentration, it is the arithmetic average of all measurements taken that day.

  • Maximum Limit means that number of issued Shares representing 10% of the total number of issued Shares as at the date of the passing of this Resolution (excluding any Shares which are held as treasury shares as at that date); and

  • Express warranty means an express warranty as set forth in sections 4-2-313 and 4-2.5-210, C.R.S. An express warranty shall cover every part of a new facilitative device.

  • Limitation of Liability PrimePay has negotiated preferred terms and conditions with FD as a service to PrimePay Clients. Client understands that FD, and not PrimePay, will be performing those services and that Client will enter its own service agreement(s) with FD for such services under terms and conditions specified by FD and agreed to by Client. Accordingly, Client acknowledges that FD shall be the provider of Payment Processing Services hereunder and that PrimePay shall have no liability whatsoever for or related to the performance of those services, including any and all damages, costs and related expenses (including attorney fees).

  • Particle accelerator means any machine capable of accelerating electrons, protons, deuterons, or other charged particles in a vacuum and of discharging the resultant particulate or other radiation into a medium at energies usually in excess of one MeV. For purposes of this definition, "accelerator" is an equivalent term.

  • Aggregate Limit shall have the meaning assigned to such term in Section 1.1 hereof.

  • Process weight means the total weight of all materials introduced into any source operation. Solid fuels charged will be considered as part of the process weight, but liquid and gaseous fuels and combustion air will not.

  • Maximum Daily Starts means the maximum number of times that a generating unit can be started in an Operating Day under normal operating conditions.

  • Positive beam limitation means the automatic or semi-automatic adjustment of an x-ray beam to the size of the selected image receptor, whereby exposures cannot be made without such adjustment.

  • Limit means a limit per tonne gross weight of that part of the Goods in respect of which a claim arises.

  • Airline Designator Code means the two-characters or three letters, which identify particular air carriers.

  • Maximum design heat input means the ability of a unit to combust a stated maximum amount of fuel per hour on a steady state basis, as determined by the physical design and physical characteristics of the unit.

  • Total Transfer Capability or “TTC” shall mean the amount of electric power that can be moved or transferred reliably from one area to another area of the interconnected Transmission Systems by way of all transmission lines (or paths) between those areas under specified system conditions.

  • Minimum data set means the data required by the Australian Government from Community Care service outlets, in the form prescribed by the Australian Government, which data is shared with the Queensland Government;

  • Maximum daily discharge limitation means the highest allowable “daily discharge.”

  • Unilateral Change Order (ULCO means a Change Order issued by Owner without the complete agreement of Contractor, as to cost and/or time.

  • Custom Calling Features means a set of Telecommunications Service features available to residential and single-line business customers including call-waiting, call-forwarding and three-party calling.

  • Maximum Cap Rate For any Distribution Date with respect to the Group I Certificates, a per annum rate equal to the sum of (i) the product of (x) the weighted average of the Expense Adjusted Net Maximum Mortgage Rates of the Group I Mortgage Loans minus an amount, expressed as a percentage, equal to the Net Swap Payment and Swap Termination Payment, if any (other than termination payments resulting from a Swap Provider Trigger Event), due from the Trust for such Distribution Date, multiplied by 12, weighted on the basis of the outstanding Stated Principal Balances of the Group I Mortgage Loans as of the first day of the month preceding the month of such Distribution Date (after giving effect to scheduled payments of principal due during the related Due Period, to the extent received or advanced, and unscheduled collections of principal received during the related Prepayment Period) and (y) a fraction, the numerator of which is 30 and the denominator of which is the actual number of days elapsed in the related Interest Accrual Period and (ii) an amount, expressed as a percentage, equal to a fraction, the numerator of which is equal to the Net Swap Payment made by the Interest Rate Swap Provider and the denominator of which is equal to the aggregate Stated Principal Balance of the Mortgage Loans, multiplied by 12. For any Distribution Date with respect to the Group II Certificates, a per annum rate equal to the sum of (i) the product of (x) the weighted average of the Expense Adjusted Net Maximum Mortgage Rates of the Group II Mortgage Loans minus an amount, expressed as a percentage, equal to the Net Swap Payment and Swap Termination Payment, if any (other than termination payments resulting from a Swap Provider Trigger Event), due from the Trust for such Distribution Date, multiplied by 12, weighted on the basis of the outstanding Stated Principal Balances of the Group II Mortgage Loans as of the first day of the month preceding the month of such Distribution Date (after giving effect to scheduled payments of principal due during the related Due Period, to the extent received or advanced, and unscheduled collections of principal received during the related Prepayment Period) and (y) a fraction, the numerator of which is 30 and the denominator of which is the actual number of days elapsed in the related Interest Accrual Period and (ii) an amount, expressed as a percentage, equal to a fraction, the numerator of which is equal to the Net Swap Payment made by the Interest Rate Swap Provider and the denominator of which is equal to the aggregate Stated Principal Balance of the Mortgage Loans, multiplied by 12. For any Distribution Date with respect to the Mezzanine Certificates, a per annum rate equal to the sum of (i) the product of (x) the weighted average (weighted on the basis of the results of subtracting from the aggregate Stated Principal Balance of the applicable Loan Group, the current Certificate Principal Balance of the related Class A Certificates) of the weighted average of the Expense Adjusted Net Maximum Mortgage Rates of the Group I Mortgage Loans and the Group II Mortgage Loans, in each case, weighted on the basis of the outstanding Stated Principal Balances of the related Mortgage Loans as of the first day of the month preceding the month of such Distribution Date (after giving effect to scheduled payments of principal due during the related Due Period, to the extent received or advanced, and unscheduled collections of principal received during the related Prepayment Period) and (y) a fraction, the numerator of which is 30 and the denominator of which is the actual number of days elapsed in the related Interest Accrual Period and (ii) an amount, expressed as a percentage, equal to a fraction, the numerator of which is equal to the Net Swap Payment made by the Interest Rate Swap Provider and the denominator of which is equal to the aggregate Stated Principal Balance of the Mortgage Loans, multiplied by 12.